NHTSA ID Number: 10225742
Manufacturer Communication Number: 12-242-22
Summary
This bulletin announces the shape design change made to the roof molding fasteners to help prevent any deformation of the molding.
NUMBER: 12-242-22
DATE: 10/03/22
| APPLICABILITY: | 2019-22MY Forester 2022MY Impreza 2022MY Crosstrek |
| SUBJECT: | Roof Panel Molding – Excessive Gap |
INTRODUCTION:
This bulletin announces the shape design change made to the roof molding fasteners to help prevent any deformation of the molding. A customer may experience an excessive gap between the roof molding and the roof panel. The new fasteners have an enhanced shape to help maintain a flat fitment of the roof molding. If this roof molding with excessive gap is reported, replace the affected fasteners with the newly redesigned parts.
PRODUCTION CHANGE INFORMATION:
The new fasteners have been incorporated into the production as per the table below.
| Model | Starting VIN |
| Forester | NH439640 |
| Impreza | TBD |
| Crosstrek | TBD |
PART INFORMATION:
REMINDER: Always order the most up-to-date replacement parts based on the specific VIN being repaired.
| Model | Part Description | Part Number | Quantity |
| Forester With Roof Rail | FASTENER | 91048FG002 | 7 Per Side |
| Forester Without Roof Rail | FASTENER | 91048FG002 | 8 Per Side |
| Impreza | FASTENER | 91048FG002 | 6 Per Side |
| Crosstrek | FASTENER | 91048FG002 | 6 Per Side |
NOTE: When deformation is present, it can be seen from all sides.
Area of Design Change:
SERVICE PROCEDURE / INFORMATION:
REMINDER: Customer satisfaction and retention starts with performing quality repairs.
The service procedures for roof molding replacement remain unchanged. Always refer to the applicable Service Manual and review the full requirements of the repair being performed. The Service Manual procedures contain information critical to performing an effective repair the first time, every time. This includes but is not limited to important SAFETY precautions, proper inspection criteria, necessary special tools, required processes and related one-time-use parts needed for a complete and lasting repair.
Refer to STIS: Body & Electrical/WIRING SYSTEM > EXTERIOR/INTERIOR TRIM > Roof Molding
IMPORTANT NOTES:
- All fasteners on BOTH sides MUST be replaced.
- Refer to the applicable Service Manual and review: General Description > Repair Contents > Action required before & after Battery Disconnect. Additionally, record any stored seat position(s) before proceeding. Relearn any seat position memory after work is complete. If the power rear gate (PRG) height has been customized, that position must also be noted and relearned.
- Whenever reconnecting the ground cable terminal to the battery sensor, torque to 7.5Nm (5.5ft.-lbs. or 66inch-lbs.) while supporting the sensor with the other hand as outlined in the applicable Service Manual under: STARTING/CHARGING SYSTSEMS > Battery Sensor.
6 Affected Products
Vehicles
1 Associated Document
Manufacturer Communications
NUMBER: 12-242-22
DATE: 10/03/22
MC-10225742-0001.pdf 1947.187KB
- Non-Scratch Pry Tools: Made from durable nylon, this auto trim removal tool kit protects your car’s surfaces from scratches while offering strong leverage for trims, panels, and dashboards
- Essential for Panel Jobs: This car panel removal tool set makes removing dashboards, door panels, and plastic trim fast and simple, whether you're working on a car, SUV, or other vehicle types
- Flexible and Durable Build: Designed to last, each car trim removal tool is sturdy yet flexible enough to handle tight angles and edges during disassembly without damaging fragile surfaces
- Universal Clip Tool Set: Includes multiple shapes for different applications; this clip removal tool helps safely extract rivets, fasteners, and car clips without prying metal-to-metal
- Compact for Any Job: The lightweight car trim removal tool kit fits easily in your glove box or toolbox, ready for quick access whenever you need to fix, replace, or upgrade car interiors
- 【Full Toolkit】Not just a basic pry kit—Includes 4 pry tools + 1 clip remover — designed for dashboards, door panels, trims, audio units, and interior clips. Designed to handle delicate trims and tough disassembly jobs. Multiple colors available for easy tool identification.
- 【Heavy-Duty Nylon】Made from upgraded impact-resistant nylon that is stronger and more durable than common ABS trim tools. Won’t snap, bend, or deform during tough jobs.
- 【Precision Control】 Thin, angled tips slide easily into tight gaps to lift clips and panels without prying force. Reinforced grip sections improve leverage and reduce the chance of clip breakage or interior damage. Designed for better control and less hand fatigue—safer and more precise than metal tools.
- 【Scratch-Safe Edges】All edges are polished to a smooth, paint-safe finish. The ultra-thin tips slide under trims cleanly without scratching dashboards, soft-touch panels, leather, or paint—perfect for modern vehicles that are easier to mark or scuff.
- 【Wide Compatibility】Perfect for cars, SUVs, trucks, RVs, boats, and motorcycles. Also works for furniture repair, electronics, and household trim projects. Easily removes door panels, infotainment units, emblems, moldings, clips, and more—making it a must-have tool for both beginners and professionals.
- 19 Pcs Trim removal tools - Works great for car audio/radio system installing or removing, door panel, moldings, emblems, window trims or automotive interior repairing and furniture restoration
- High Quality Trim Tools - Made of toughened nylon fibers with the strength to pry up panels and pop off panel retaining pins for non-destructive automotive modifications
- Ergonomic Design - These door panel removal tools are easy to grip and fit into hard-to-reach spaces and crevices. Saves time and labor on all kinds of car interiors and exteriors
- Easy for Storage - Auto trim removal tool kit comes with a portable zippered storage bag to organize all your tools after use. You never have to worry about losing your tools
- Package Include - 11pcs interior trim tools, 2pcs fastener remover tools, 2pcs stereo removal tools, 3pcs car terminal removal tools, 1pc trim clip removal Pliers, and a portable storage bag
- Damage Prevention - The trim removal tool boasts a larger, flatter, and wider contact area compared to traditional tools. Its integrated wedged center significantly enhances removal efficiency while preventing damage to both trim and walls.
- Superior Material and Durability - Our trim puller is made from carbon steel and 65Mn steel with black electrophoretic and polished finish, which protects against corrosion and gives our pry bar added durability and strength. So the Trim Puller is a very beefy tool, and it will hold up well to repeated whacking.
- Versatile Application for Precision Projects - Perfect for commercial tasks and meticulous remodel projects, including applications in cabinets, countertops, and flooring. From kitchen remodels to delicate tile removal, it excels in precision work such as extracting staples with minimal effort.
- Ergonomic Design for Comfort - All our trim puller is built with an ergonomic, comfortable and textured dipped handle. An impact-absorbing TPR+PP handle makes it comfortable to hold, though.
- Revolutionary Tool - Our Trim Puller is a very beefy tool. The Built-in spring design assists in separating the trim from the wall freely and quickly. The 15-degree wedged center is for easy extraction of trim and baseboards.Goldblatt holds a U.S. patent for this Trim Puller, patent number US 11,142,921.
- Trim Saving - The trim removal tool has a larger, flatter and wider contact area than clumsy traditional tools and features an integrated wedged center that provides increased removal efficiency and prevents damage to both the trim and wall
- Sturdy Pry Bars - Our trim puller is made from carbon steel and 65Mn steel with black electrophoretic and polished finish, which protects against corrosion and gives our pry bar added durability and strength. So the Trim Puller is a very beefy tool, and it will hold up well to repeated whacking
- Multi-Function - Ideal for commercial work, repair and remodel projects where care and precision are needed, including cabinets, countertops, flooring, and many more. It can be used on a kitchen remodel, removing a couple of sections of baseboard, a countertop from some base cabinets, and pulling up a ceramic tile floor. The very edge can also be used to pry up the staples
- Ergonomic Handle - The trim puller is built with an ergonomic, comfortable and textured dipped handle. An impact-absorbing TPR+PP handle makes it comfortable to hold
- Revolutionary Tool - Our Trim Puller is a very beefy tool. The Built-in spring design assists in separating the trim from the wall freely and quickly. The 15-degree wedged center is for easy extraction of trim and baseboards. Goldblatt holds a U.S. patent for this Trim Puller, patent number US 11,142,921
SEOCONTENT-START
Bulletin Number: 12-242-22; Date: 10/03/22 Page 1 of 4 SERVICE BULLETIN Continued… CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS. Subaru
Service Bulletins are intended for use by professional technicians ONLY. They are written to inform those technicians of conditions that may occur in some vehicles, or to provide information that could assist in the proper servicing of the vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do the job correctly and safely. If a condition is described, DO NOT assume that this Service Bulletin applies to your vehicle, or that your vehicle will have that condition. Subaru of America, Inc. is ISO 14001 Compliant ISO 14001 is the international standard for excellence in Environmental Management Systems. Please recycle or dispose of automotive products in a manner that is friendly to our environment and in accordance with all local, state and federal laws and regulations. NUMBER: 12-242-22 DATE: 10/03/22 APPLICABILITY: 2019-22MY Forester 2022MY Impreza 2022MY Crosstrek SUBJECT: Roof Panel Molding – Excessive Gap INTRODUCTION: This bulletin announces the shape design change made to the roof molding fasteners to help prevent any deformation of the molding. A customer may experience an excessive gap between the roof molding and the roof panel. The new fasteners have an enhanced shape to help maintain a flat fitment of the roof molding. If this roof molding with excessive gap is reported, replace the affected fasteners with the newly redesigned parts. PRODUCTION CHANGE INFORMATION: The new fasteners have been incorporated into the production as per the table below. Model Starting VIN Forester NH439640 Impreza TBD Crosstrek TBD PART INFORMATION: REMINDER: Always order the most up-to-date replacement parts based on the specific VIN being repaired. Model Part Description Part Number Quantity Forester With Roof Rail FASTENER 91048FG002 7 Per Side Forester Without Roof Rail FASTENER 91048FG002 8 Per Side Impreza FASTENER 91048FG002 6 Per Side Crosstrek FASTENER 91048FG002 6 Per Side ATTENTION: GENERAL MANAGER q PARTS MANAGER q CLAIMS PERSONNEL q SERVICE MANAGER q IMPORTANT – All Service Personnel Should Read and Initial in the boxes provided, right. ©2022 Subaru of America, Inc. All rights reserved. Bulletin Number: 12-242-22; Date: 10/03/22 Page 2 of 4 Continued… NOTE: When deformation is present, it can be seen from all sides. Area of Design Change: Bulletin Number: 12-242-22; Date: 10/03/22 Page 3 of 4 Continued… SERVICE PROCEDURE / INFORMATION: REMINDER: Customer satisfaction and retention starts with performing quality repairs. The service procedures for roof molding replacement remain unchanged. Always refer to the applicable Service Manual and review the full requirements of the repair being performed. The Service Manual procedures contain information critical to performing an effective repair the first time, every time. This includes but is not limited to important SAFETY precautions, proper inspection criteria, necessary special tools, required processes and related one-time-use parts needed for a complete and lasting repair. Refer to STIS: Body & Electrical/WIRING SYSTEM > EXTERIOR/INTERIOR TRIM > Roof Molding IMPORTANT NOTES: • All fasteners on BOTH sides MUST be replaced. • Refer to the applicable Service Manual and review: General Description > Repair Contents > Action required before & after Battery Disconnect. Additionally, record any stored seat position(s) before proceeding. Relearn any seat position memory after work is complete. If the power rear gate (PRG) height has been customized, that position must also be noted and relearned. • Whenever reconnecting the ground cable terminal to the battery sensor, torque to 7.5Nm (5.5ft.-lbs. or 66inch-lbs.) while supporting the sensor with the other hand as outlined in the applicable Service Manual under: STARTING/CHARGING SYSTSEMS > Battery Sensor. WARRANTY / CLAIM INFORMATION: For vehicles within the Basic New Car Limited Warranty period this repair may be submitted using the following claim information: MODELS WITH ROOF RAILS; Forester Crosstrek and Impreza. Labor Description Labor Operation # Labor Time Fail Code BOTH SIDES, ROOF PANEL MOLDING /CAPS R&R A926-354 1.5 XKT-29 MODELS WITHOUT ROOF RAILS; Forester and Impreza. Labor Description Labor Operation # Labor Time Fail Code BOTH SIDES, ROOF PANEL MOLDING /CAPS R&R A926-354 0.5 XKT-29 Bulletin Number: 12-242-22; Date: 10/03/22 Page 4 of 4 IMPORTANT REMINDERS: • SOA strongly discourages the printing and/or local storage of service information as previously released information and electronic publications may be updated at any time. • Always check for any open recalls or campaigns anytime a vehicle is in for servicing. • Always refer to STIS for the latest service information before performing any repairs.
SEOCONTENT-END
This product presentation was made with AAWP plugin.