Accessory Installation Guide
2024MY Impreza RS & Crosstrek Sport, Limited – STI Leather Shift Knob – CVT | C1010FN001 |
INSTALLATION INSTRUCTIONS
PART NUMBER: C1010FN001
DESCRIPTION: STI CVT SHIFT KNOB
TOOLS REQUIRED:
Plastic Trim Removal Tool
STEP 1: Park vehicle on level surface. Apply parking brake. Place vehicle in “P” Park.
STEP 2: Use plastic trim removal tool to pry and push down on the factory cover grip.
STEP 3: From the front of the shift knob, use your fingernail to pull the pre-installed pin clip forward. Then remove the OE shift knob by lifting it upward.
STEP 4: Check to make sure pre-installed pin clip is still installed on the STI CVT Shift Knob. NOTE: Place your finger over the pin clip. Carefully align and position shift knob and then push down until a click is heard. CAUTION: If your finger is not placed over the pin clip during the downward push, the pin clip may eject and get lost. If the pin clip comes loose, you can still install it by holding down the shift knob while inserting the pin clip towards the back of the vehicle until it engages.
STEP 5: While holding down shift knob, pull the cover grip upward until a click is heard.
STEP 6: Depress brake pedal. Confirm that the shift knob is firmly installed and that the button can be fully depressed. Make sure the shift knob is properly installed before operating the vehicle. Turn on ignition, depress and hold brake pedal, confirm shift lever cannot shift out of “P” without depressing button. Confirm shift lever function by checking engagement into Reverse and MD modes.
C1010FN001
- Genuine Subaru Leather Shift Knob
- 35160AL00A
- CVT Automatic Models Only
- Add a stylish touch with the leather-trimmed shift knob.
- 2019-2024 ASCENT
- Installation: Need to do a little easy sewing, we offer needle and thread
- 【PERFECT UPGRADE】 – High-quality replacement gear shift knob designed to refresh your car interior. A stylish aftermarket option to replace your worn-out OEM factory knob. Fits most automatic and manual transmission vehicles including fits Toyota, Lexus, Acura, Mazda, Subaru, Scion, Nissan, Infiniti
- 【PREMIUM QUALITY 】– Crafted with durable, wear-resistant leather and a smooth surface finish. Ergonomically shaped for a comfortable grip and long-lasting durability.
- 【EASY INSTALLATION】 – Quick screw-on installation with no tools or modifications required. Simply twist clockwise to install. Compatible with most automatic and manual transmission gearbox shifters without a Button, with M8, M10, M12 thread size.
- 【UNIVERSAL COMPATIBILITY】 – Compatible with Mazda 3, 5, 6, 8, CX-5, CX-7, CX-9, and MX-5; Acura MDX, RL, TL, TSX, and CL; Scion tC, xB, xD, and iQ; Toyota 4Runner, Avalon, Camry, Corolla, Matrix, Rav4, Sienna, Tacoma, Tundra, Highlander, and Venza; Lexus ES, GS, IS, LS, LX, RX, and SC; Subaru Forester Impreza Legacy Outback, Nissan Titan Armada, Infiniti QX56 models with M8, M10, M12 threads.
- 【DIRECT FITMENT】 – Knob size: 4.3” x 2” x 1.6” [11cm x 5cm x 4.5cm]. Direct replacement upgrade option for your OEM Knob Sub-Assembly Shift Lever. Directly fits wide-ranging vehicles with 8mm x1.25, 10mm x 1.25, 10mm x 1.5, M12mm x 1.25 thread sizes.
- 【Material】: This car shift knob is crafted from a combination of carbon fiber and aluminum alloy. The aluminum alloy base is weather-resistant and wear-resistant, ensuring it won't fade or warp during daily use. The carbon fiber layer offers a lightweight yet sturdy feel, balancing durability with a premium aesthetic.
- 【Function】: This car gear shift knob features an ergonomic, streamlined design that fits the natural grip of your palm, providing a smooth and effortless shifting experience that enhances driving control. The unique carbon fiber texture and matte finish instantly elevate the interior style, showcasing individuality and a sporty vibe.
- 【Easy Installation】: This car gear shift knob is easy to install and requires no special tools, making it simple even for beginners. First, remove the original shift knob, then select the matching threaded adapter, screw the adapter onto the shift lever, and finally tighten the new shift knob.
- 【Wide Application】: This carbon fiber shift knob comes with threaded adapters in multiple sizes—including M8, M10, and M12—making it compatible with most 4-speed, 5-speed, and 6-speed manual transmissions as well as buttonless automatic transmissions. It is suitable for mainstream vehicles such as sedans, SUVs, pickups, and performance cars.
- 【Package Includes and Size】: The package includes 1 carbon fiber shift knob (dimensions approx. 3.57 × 1.34 inches) and 3 precision threaded adapters with thread sizes of 8 mm, 10 mm, and 12 mm. With a complete set of accessories, it meets the fitting requirements for various vehicle models.
- Premium Red JDM Style 100% Real Carbon Fiber Ball Shift Knob Upgrade: Add an instant performance-inspired look to your interior with this cool JDM-style real red carbon fiber shift knob designed for daily driving, spirited runs, and show-car builds.
- One Size Fits Most 4/5/6 Speed Manual & Buttonless Automatic Shifters: Works with most cars, trucks, and SUVs using standard threaded shift levers. Designed as a low-profile, universal-style replacement for worn-out factory gear stick shift knobs or simple interior customization.
- 2” Diameter Round Ball Shape With Real Grade A 3K Twill Carbon Fiber & Clear Coating: Constructed from 100% genuine Grade A 3K twill carbon fiber with a protective clear-coated finish that resists color fading, enhances UV protection, and preserves the glossy look for long-lasting durability.
- Improved Grip & Shifting Feel: The spherical design provides a natural, ergonomic grip that gives you better hand control, reduces missed shifts, and improves your overall driving experience.
- Built-In M12x1.25 Thread With 3 Additional Metal Adapters (Not Cheap Plastic): Features a built-in M12x1.25 thread, plus three additional secure-fit metal adapters in M8x1.25, M10x1.25, and M10x1.5 for a strong, long-lasting fit. Metal adapters feel more premium and won’t crack like plastic alternatives.
SEOCONTENT-START
PART NUMBER:C1010FN001 ISSUE00 2023/6/23 SUBARU OF AMERICA PAGE 1 / 4 PART NUMBER: C1010FN001 TOOLS REQUIRED: INSTALLATION INSTRUCTIONS DESCRIPTION: STI CVT SHIFT KNOB PARTS IDENTIFICATION: STI CVT SHIFT KNOB Plastic Trim Removal Tool SHIFTKNOB PRE-INSTALLED PIN CLIP NOTE: Shown separated for clarity PART NUMBER:C1010FN001 ISSUE00 2023/6/23 SUBARU OF AMERICA PAGE 2 / 4 STEP 2: Use plastic trim removal tool to pry and push down on the factory cover grip. PART NUMBER: C1010FN001 STEP 1: Park vehicle on level surface. Apply parking brake. Place vehicle in “P” Park. PART NUMBER:C1010FN001 ISSUE00 2023/6/23 SUBARU OF AMERICA PAGE 3 / 4 STEP 4: Check to make sure pre-installed pin clip is still installed on the STI CVT Shift Knob. NOTE: Place your finger over the pin clip. Carefully align andposition shift knob and then push down until a click is heard. CAUTION: If your finger is not placed over the pin clip during the downward push, the pin clipmay eject and get lost. If the pin clip comes loose, you can still install it by holding down the shift knob while inserting the pin clip towards the back of thevehicle until it engages. PART NUMBER: C1010FN001 STEP 3: From the front of the shift knob, use your fingernail to pull the pre-installed pin clip forward. Then remove the OE shift knob by lifting it upward. PRE-INSTALLED PIN CLIP NOTE: Shown separated for clarity PART NUMBER: C1010FN001 STEP 5: While holding down shift knob, pull the cover grip upward until a click is heard. STEP 6: Depress brake pedal. Confirm that the shift knob is firmly installed and that the button can be fully depressed. Make sure the shift knob is properlyinstalled before operating the vehicle. Turn on ignition, depress and hold brake pedal, confirm shift lever cannot shift out of “P” without depressing button.Confirm shift lever function by checking engagement into Reverse and MD modes. PART NUMBER:C1010FN001 ISSUE00 2023/6/23 SUBARU OF AMERICA PAGE 4 / 4
SEOCONTENT-END
This product presentation was made with AAWP plugin.