Accessory Installation Guide
| 2022MY WRX – STI Leather Shift Knob | C1010VC001 |
INSTALLATION INSTRUCTIONS
PART NUMBER: C1010VC001
DESCRIPTION: STI CVT SHIFT KNOB
TOOLS REQUIRED:
Plastic Trim Removal Tool
STEP 1: Park vehicle on level surface. Apply parking brake. Place vehicle in “P” Park.
STEP 2: Use plastic trim removal tool to pry and push down on the factory cover grip.
STEP 3: Use fingers to push pin clip forward on both sides. Remove OE shift knob.
STEP 4: Check to make sure pre-installed pin clip is still installed on the STI CVT Shift Knob. NOTE: Place your finger over the pin clip. Carefully align and position shift knob and then push down until a click is heard. CAUTION: If your finger is not placed over the pin clip during the downward push, the pin clip may eject and get lost. If the pin clip comes loose, you can still install it by holding down the shift knob while inserting the pin clip towards the back of the vehicle until it engages.
STEP 5: While holding down shift knob, pull the cover grip upward until a click is heard.
STEP 6: Depress brake pedal. Confirm that the shift knob is firmly installed and that the button can be fully depressed. Make sure the shift knob is properly installed before operating the vehicle. Turn on ignition, depress and hold brake pedal, confirm shift lever cannot shift out of “P” without depressing button. Confirm shift lever function by checking engagement into Reverse and MD modes.
C1010VC001
- Genuine Subaru Leather Shift Knob
- 35160AL00A
- CVT Automatic Models Only
- Add a stylish touch with the leather-trimmed shift knob.
- 2019-2024 ASCENT
- for Subaru Forester 2019-2022, for XV Crosstrek 2018-2022, for Impreza 2018-2022, for Outback Legacy 2020-2022
- Not for MT model, Only Fit AT(Automatic Transmission)
- Made of ABS plastic carbon fiber pattern
- Easy Installation, No Tool Required. Clean the position before installation, and heat the tape a little for better adhesion
- Change the ordinary exterior and add cool design to your car, making it high class, unique and different from any other
- 【Model compatible】: The gear cover compatible with Subaru WRX 2022 2023 WRX STI, The size of the original car is customized, This Car Center Control Gear Shift Knob Head Frame Cover Sticker Interior Trim fits the gear head perfectly.
- 【High quality material】: ThisGear shift head trim is made of premium ABS material, The hand-woven carbon fiber covering , transparent and smooth surface, colorfast, scratch-resistant and anti-corrosion, lightweight and durability.
- 【Protection and beauty】: Gear Shift Knob Trim Cover Sticker According to the original car design, the can brighten and improve the monotonous appearance of your original car, add unique color. And protect the edge of the gear shifter from scratches and abrasion.
- 【Easy to install】: carbon fiber pattern Gear Shift Shifter Knobs Cover Trim frame cover sticker is easy to install and use, No drilling/tools required. No damage to your gear lever. Self adhesive design. Peel the tape, then carefully stick it in place, and press firmly to ensure a good grip of the adhesive.
- 【Warranty and after-sales】Included; 3PCS Automatic Gear Shift Knob Cover , Please check whether your car model is consistent with the product before buying the product to prevent buying the wrong product, Unsuitable or received defective products can contact us . We will deal with your problem within 24 hours.
- PERFECT UPGRADE – High-quality replacement gear shift knob designed to refresh your car interior. A stylish aftermarket option to replace your worn-out OEM factory knob. Fits most automatic and manual transmission vehicles including fits Toyota, Lexus, Acura, Mazda, Subaru, Scion, Nissan, Infiniti
- PREMIUM QUALITY – Crafted with durable, wear-resistant leather and a smooth surface finish. Ergonomically shaped for a comfortable grip and long-lasting durability.
- EASY INSTALLATION – Quick screw-on installation with no tools or modifications required. Simply twist clockwise to install. Compatible with most automatic and manual transmission gearbox shifters without a Button, with M8, M10, M12 thread size.
- UNIVERSAL COMPATIBILITY – Compatible with Mazda 3, 5, 6, 8, CX-5, CX-7, CX-9, and MX-5; Acura MDX, RL, TL, TSX, and CL; Scion tC, xB, xD, and iQ; Toyota 4Runner, Avalon, Camry, Corolla, Matrix, Rav4, Sienna, Tacoma, Tundra, Highlander, and Venza; Lexus ES, GS, IS, LS, LX, RX, and SC; Subaru Forester Impreza Legacy Outback, Nissan Titan Armada, Infiniti QX56 models with M8, M10, M12 threads.
- DIRECT FITMENT – Knob size: 4.3” x 2” x 1.6” [11cm x 5cm x 4.5cm]. Direct replacement upgrade option for your OEM Knob Sub-Assembly Shift Lever. Directly fits wide-ranging vehicles with 8mm x1.25, 10mm x 1.25, 10mm x 1.5, M12mm x 1.25 thread sizes.
- 【Premium Genuine Leather Material】:Crafted from high-quality genuine leather, this gear shift knob cover provides a luxurious and comfortable touch while enhancing your car interior. Durable, scratch-resistant, and designed for long-lasting daily use.
- 【Compatible Vehicle Fitment】:Designed to fit Crosstrek(2018 2019 2020 2021 2022 2023 2024 2025 2026) Forester(2019 2020 2021 2022 2023 2024) Impreza(2017 2018 2019 2020 2021 2022 2023 2024 2025 2026) Legacy(2020 2021 2022 2023 2024 2025) Outback(2020 2021 2022 2023 2024 2025) WRX(2022 2023 2024 2025 2026) gear shift knobs for a precise and secure fit.
- 【Effective Protection for Shift Knob】:Protects the gear shift knob from scratches, wear, dust, and daily damage, keeping the interior clean and well-maintained.
- 【Stylish Interior Upgrade Design】:Fine stitching craftsmanship delivers a sporty and luxury appearance, improving the overall look of your car interior.
- 【Hand-Sewn Installation Design】:This product features a hand-sewn installation method, and an installation manual is included in the package. The installation process is simple and easy to follow. The hand-sewn design provides a more secure and firm fit, while also allowing you to enjoy a DIY installation experience.
SEOCONTENT-START
PART NUMBER: C1010VC001 TOOLS REQUIRED: IN STALLATIO N IN STRU CTIO N S D ESCRIPTIO N : STI CVT SH IFT KN O B PARTS IDENTIFICATION: PART NUMBER: C1010VC001 ISSUE 00 5/26/2023 SUBARU OF AMERICA PAGE 1 / 4 STI CVT SHIFT KNOB Plastic Trim Removal Tool SHIFT KNOB PRE-INSTALLED PIN CLIP STEP 2: Use plastic trim removal tool to pry and push down on the factory cover grip. PART NUMBER: C1010VC001 STEP 1: Park vehicle on level surface. Apply parking brake. Place vehicle in “P” Park. PART NUMBER: C1010VC001 ISSUE 00 5/26/2023 SUBARU OF AMERICA PAGE 2 / 4 STEP 4: Check to make sure pre-installed pin clip is still installed on the STI CVT Shift Knob. NOTE: Place your finger over the pin clip. Carefully align and position shift knob and then push down until a click is heard. CAUTION: If your finger is not placed over the pin clip during the downward push, the pin clip may eject and get lost. If the pin clip comes loose, you can still install it by holding down the shift knob while inserting the pin clip towards the back of the vehicle until it engages. PART NUMBER: C1010VC001 STEP 3: Use fingers to push pin clip forward on both sides. Remove OE shift knob. PART NUMBER: C1010VC001 ISSUE 00 5/26/2021 SUBARU OF AMERICA PAGE 3 / 4 STEP 6: Depress brake pedal.Confirm that the shift knob is firmly installed and that the button can be fully depressed. Make sure the shift knob is properly installed before operating the vehicle. Turn on ignition, depress and hold brake pedal, confirm shift lever cannot shift out of “P” without depressing button. Confirm shift lever function by checking engagement into Reverse and MD modes. PART NUMBER: C1010VC001 ISSUE 00 5/26/2023 SUBARU OF AMERICA PAGE 4 / 4 PART NUMBER: C1010VC001 STEP 5: While holding down shift knob, pull the cover grip upward until a click is heard.
SEOCONTENT-END
This product presentation was made with AAWP plugin.