Accessory Installation Guide
| 2023MY Legacy Outback Auto Dimming Interior Mirror Installation Instructions | H505SAN000 |
Installation instructions
Instructions d’installatiion
Part number:
Numéro de piéce:
H505SAN000
Vehicle:
Véhicule:
Outback/ Legacy
1
Disconnect battery cable from the negative battery stud.
Débranchez le câble de la batterie de la borne négative de la batterie.
2
Remove Cover
Retirez le couvercle
3
Remove (2) 8mm bolts
Retirez (2) boulons de 8 mm
4
Pull down from rear of map light console to disengage tabs
Tirez vers le bas à partir de l’arrière de la console de la lampe de lecture pour désengager les languettes
5
Unplug connectors
Débranchez le connecteurs
6
Firmly grasp the factory mirror and remove by rotating the base and pulling away simultaneously from the windshield mounting button.
Saisissez fermement le rétroviseur d’oridine et retirez-le en tournant la base et en l’écartant simultanément du bouton de fixation du pare-brise.
7
1. Install the Compass mirror with HomeLink by aligning the mirror retention clips with the windshield mirror button and pressing against the mirror to fully seat the mirror.
2. Rotate the mirror until properly aligned with the reference notch shown
1. Installez le rétroviseur à boussole équipé d’HomeLink en alignant les attaches de fixation du rétroviseur avec le bouton de pare-brise du rétroviseur, puis en pressant suffisamment sur le rétroviseur pour bien le positionner.
2.Tournez le rétroviseur jusqu’à ce qu’il soit bien aligné avec la référence
8
Route mirror connector over eyesight module
Acheminez le connecteur du rétroviseur par-dessus le module EyeSight
9
Locate vehicle harness
Repérez le faisceau du véhicule
10
1. Plug jumper harness into pre-wire connector and mirror and
2. Collect and zip tie excess harness
1. Branchez le faisceau cavalier dans le connecteur de précâblé et dans le rétroviseur et
2. Recueillez et attachez l’excédent du faisceau
11
Plug in map light console connectors
Branchez le connecteurs de la console
12
Re-install map light console by lining up cover and pushing up. Then engage map light clips
Réinstallez la console de la lampe de lecture en alignant le couvercle et en poussant vers le haut Ensuite, engagez les attaches de la lampe de lecture
13
Re-install 8mm bolts
Réinstallez les boulons de 8 mm
14
Reinstall cover.
Réinstallez le couvercle
15
Reconnect battery. If equipped reconnect eyelet cable. Tighten bolt to 66 in-lbs.
Rebranchez la batterie. Si elle en est équipée, rebranchez le câble de l’oeillet. Serrez les boulons à 66 po-lb.
16
Using dark cloth or cardboard, completely cover forward-looking sensor.
Avec un linge sombre ou un carton, couvrez complètement le capteur pointé vers l’avant.
17
To calibrate compass reference mirror user guide.
Pour étalonne la boussole, reportez-vous au manuel du rétroviseur.
H505SAN000
- Auto-Dimming Electrochromic Technology — Automatically darkens when bright headlights hit the rearview mirror, eliminating blinding glare instantly. No more flipping a manual tab. Safer night driving in one upgrade.
- True Universal Fit — Comes with a sliding metal bracket that adapts to most OEM button-style mounts. If your original mount doesn't match, simply swap to the included alternative metal base. Extended cable provides extra length for trucks, vans, and SUVs.
- Premium Frameless Design — Ultra-slim, sleek edge-to-edge glass with no plastic bezel. Looks OEM-pro and gives your interior a modern, clean finish
- DIY Installation (2 Options) — If your vehicle has a pre-wired plug , simply connect the plug-and-play harness and you're done. No plug? No problem — use the included extended cable and wiring kit to hardwire to your ACC fuse or dome light. Everything included: mirror, sliding bracket kit, alternative base, extended cable, wire ties, trim cover, and wrench.
- Why Upgrade from a auto dimming rear view mirror? — A basic rearview mirror costs $20-40 and does nothing. For a few dollars more, your auto-dimming mirror actively works for you every night — reducing eye strain, improving reaction time, and making every drive safer. Fits most vehicles from 2000 to present day.
- 1.【4.3-inch screen】: Our car rearview mirror display is a 4.3-inch color screen with a resolution of 480*272 and a 16:9 display format; the brightness of 500 cd/m2 ensures clear visibility even in bright sunlight.
- 2.【Auto-dimming function】: The HD is equipped with an automatic dimming function, which can adjust the brightness according to the ambient light conditions and automatically turn on the rearview camera screen when reversing. With an accurate distance scale line display, it can park and reverse correctly, making parking and reversing more convenient and .
- 3.【ABS shell】Our interior rear view mirror made of high-quality and materials. ABS shell, not only ensures its service life, but also adds a stylish and modern feel to your car interior.
- 4.【Practicality】Our 4.3-inch rearview mirror automatic dimming display is designed to provide high-definition and automatic dimming reversing images, solving the problem of poor rearview effect of the car and ensuring a safer parking and reversing experience.
- 5. 【Package List】The package contains 1 car rearview mirror monitor, 1 video cable and power cable, 1 extra cable cover, 1 English manual, 1 bracket and 5 screws, providing everything you need for easy and worry- installation.
- These mirrors eliminate the glare of headlights behind you for safer nighttime
- Mirror automatically dims as it detects glare
- The brighter the glare, the more the mirror dims
- Dimensions - 12 x 6.5 x 4.75 in.
- Gentex Auto-Dimming Rear View Mirrors
- 【Clear Vision】The high-definition curved glass provides a crystal-clear, distortion-free view that instantly expands your rear and side visibility. It reduces blind spots, enhances spatial awareness, and allows you to monitor rear passengers, including children, with ease. Premium HD glass ensures sharp, true-to-life reflections for safer lane changes, turning, and parking—helping you drive with confidence.
- 【Universal Fit】Measuring 12" × 3", this wide-angle mirror is designed to fit most cars, SUVs, trucks, and vans. Compatible with original mirror heights of 55–80 mm. Please confirm the size of your factory mirror before purchasing to ensure proper fit.
- 【Anti-Glare Blue Lens】The blue-tinted anti-glare lens reduces harsh sunlight and nighttime headlight glare for a more comfortable driving experience. Due to the anti-glare coating, the mirror surface appears blue, which may slightly reduce brightness at night—this is a normal characteristic designed to protect your eyes.
- 【Anti-Shake Clips】Upgraded four-point clip-on mount keeps the mirror firmly secured to your original mirror. Prevents shaking, rattling, or slipping—even on bumpy roads or at highway speeds.
- 【Quick Installation】Installs in seconds—no tools required. Adjust the two buckles, clip onto your original mirror, and press to secure. Easy to remove without leaving marks. Note: The mirror is fragile; do not press hard during installation.
SEOCONTENT-START
Installation instructions Instructions d’installatiion
Auto dimming mirror Tetroviseur antieblouissement
Tools required Outils requis
Part number: Numéro de piéce:
Kit contents Contenu de la trousse
H505SAN000
Description: Auto dimming mirror Description: Tetroviseur antieblouissement
ISSUE A
DATE 8/26/2022
SUBARU
OF AMERICA
PAGE
1/6
A
Panel removal tool
Outil de dépose du panneau
Vehicle: Véhicule:
Outback/ Legacy
10 mm
PART NUMBER H505SAN000
B C D
Wire harness Faisceau de câblage
Wire Tie Attache autoblo- quante
Foam Tape
Ruban mou se 1 2 10 mm Disconnect battery cable from the negative battery stud. Débranchez le câble de la batterie de la borne négative de la batterie. Remove Cover Retirez le couvercle 3 4 Remove (2) 8mm bolts Retirez (2) boulons de 8 mm Pull down from rear of map light console to disengage tabs Tirez vers le bas à partir de l’arrière de la console de la lampe de lecture pour désengager les languettes PART NUMBER H505SAN000 ISSUE A DATE 8/26/2022 SUBARU OF AMERICA PAGE
2/6 5 6 Unplug connectors Débranchez le connecteurs Firmly grasp the factory mirror and remove by rotating the base and pulling away simultaneously from the windshield mounting button.
Saisissez fermement le rétroviseur d’oridine et retirez-le en tournant la base et en l’écartant simultanément du bouton de fixation du pare-brise. 7 8 1 2 1. Install the Compass mirror with HomeLink by aligning the mirror retention clips with the windshield mirror button and pressing against the mirror to fully seat the mirror.
2. Rotate the mirror until properly aligned with the reference notch shown
1. Installez le rétroviseur à boussole équipé d’HomeLink en alignant les attaches de fixation du rétroviseur avec le bouton de pare-brise du rétroviseur, puis en pressant suffisamment sur le rétroviseur pour bien le positionner.
2.Tournez le rétroviseur jusqu’à ce qu’il soit bien aligné avec la référence Route mirror connector over eyesight module
Acheminez le connecteur du rétroviseur par-dessus le module EyeSight PART NUMBER H505SAN000 ISSUE A DATE 8/26/2022 SUBARU OF AMERICA PAGE
3/6 9 10 Locate vehicle harness Repérez le faisceau du véhicule 1. Plug jumper harness into pre-wire connector and mirror and
2. Collect and zip tie excess harness
1. Branchez le faisceau cavalier dans le connecteur de précâblé et dans le rétroviseur et
2. Recueillez et attachez l’excédent du faisceau 11 12 Plug in map light console connectors Branchez le connecteurs de la console Re-install map light console by lining up cover and pushing up. Then engage map light clips
Réinstallez la console de la lampe de lecture en alig- nant le couvercle et en poussant vers le haut Ensuite, engagez les attaches de la lampe de lecture PART NUMBER H505SAN000 ISSUE A DATE 8/26/2022 SUBARU OF AMERICA PAGE
4/6 13 14 Re-install 8mm bolts
Réinstallez les boulons de 8 mm Reinstall cover. Réinstallez le couvercle 15 10 mm Reconnect battery. If equipped reconnect eyelet cable. Tighten bolt to 66 in-lbs.
Rebranchez la batterie. Si elle en est équipée, rebranchez le câble de l’œillet. Serrez les boulons à 66 po-lb. PART NUMBER H505SAN000 ISSUE A DATE 8/26/2022 SUBARU OF AMERICA PAGE
5/6 E
PART NUMBER H505SAN000
DATE
A 8/26/2022
SUBARU OF AMERICA
PAGE
6/6 16 17
Using dark cloth or cardboard, completely cover forward-looking sensor.
Avec un linge sombre ou un carton, couvrez complètement le capteur pointé vers l’avant.
To calibrate compass reference mirror user guide.
Pour étalonne la boussole, reportez-vous au manuel du rétro-
viseur.
SEOCONTENT-END
This product presentation was made with AAWP plugin.