NHTSA ID Number: 10240104
Manufacturer Communication Number: 12-250-23
Summary
This bulletin announces a design change made to the front door partition glass.
NUMBER: 12-250-23
DATE: 07/10/23
| APPLICABILITY: | 2023MY BRZ |
| SUBJECT: | Rushing Wind Sounds from Front Door(s) |
INTRODUCTION:
This bulletin announces a design change made to the front door partition glass. The run channel section of the front door partition glass has been fitted with an additional rib reducing the clearance between the glass and molding. This change has been introduced to address isolated cases of a windtype sound from the partition glass area. If a wind-type noise is detected in this area, follow the service procedures outlined in this bulletin.
PRODUCTION CHANGE INFORMATION:
The new front door partition glass has been incorporated into vehicle production as per the table below.
| Model | Starting VIN |
| BRZ | P9702978 |
PART INFORMATION:
REMINDER: Always order the most up-to-date replacement parts based on the specific VIN being repaired.
| Part Description | Part Number |
| GLASS-FRONT DOOR,PARTITION,RIGHT | 61011CC201 |
| GLASS-FRONT DOOR,PARTITION,LEFT | 61011CC211 |
TESTING PROCEDURE:
- After verifying the customer concern, apply masking tape on the right or left run channel section of the front door partition glass as shown in the image to the right (one side at a time).
- Road test and determine if any wind-type sounds can be duplicated. If duplicated, the front door partition glass is NOT the fault and further diagnosis will be required. If NOT duplicated, the affected front door partition glass will require replacement.
IMPORTANT: The front door partition glasses do not have to be replaced in pairs. ONLY the affected side(s) requires replacement.
SERVICE PROCEDURE / INFORMATION:
REMINDER: Customer satisfaction and retention starts with performing quality repairs.
The service procedures for front door partition glass replacement remain unchanged. Always refer to the applicable Service Manual and review the full requirements of the repair being performed. The Service Manual procedures contain information critical to performing an effective repair the first time, every time. This includes but is not limited to important SAFETY precautions, proper inspection criteria, necessary special tools, required processes and related one-time-use parts needed for a complete and lasting repair.
Refer to STIS: Body & Electrical/WIRING SYSTEM > GLASS/WINDOWS/MIRRORS > Front Door Glass
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| SUBARU | BRZ | 2023 |
1 Associated Document
Manufacturer Communications
NUMBER: 12-250-23
DATE: 07/10/23
MC-10240104-0001.pdf 329.522KB
- Left Drivers Wheel Arch Weatherstrip
- Genuine Subaru
Part Number: 63526SJ010 - Forester 2019-2024
- Other Names: Lower Weather-Strip Retainer Clip, Door Seal Clip, Clip
- Positions: Left Lower, Right Lower
- Replaces Subaru
909120028, Fits BRZ 2013-2019; Forester 2014-2018, 1999-2008; Impreza 1999-2001 - Green Nylon
- SEAL AND KEEP OUT UNWANTED WIND, WATER, LIGHT AND SOUND! - The simple use of the draught excluder around a door or window frame can drastically help keep a comfortable temperature in your home. It's made of a flexible material and will not freeze or crack under extreme temperatures. Use together with other VITAM AMO Brand weatherization products to make your home more comfortable and energy efficient all year long. It seals large gap from 5/16’’ to 15/32’'.
- EVEN BETTER MATERIAL! The sealing strip is made of VITAM AMO's specially formulated EPDM rubber, which has excellent performance in low temperature environment, extrusion-resilience coefficient and durability. VITAM AMO weatherstripping can be used for both inside and outside application, for commercial or residential doors to help control your environment.
- A QUICK SOLUTION! NO TOOLS OR EXPERIENCE REQUIRED - The length of seal stripping is 18 feet. If the length of a roll is not enough for use, just purchase more rolls for extension. SUPER STRONG SELF-ADHESIVE door/window weather stripping is covered on one side with a strong sticky substance. Install it just by tearing the yellow film on the surface. It works on doors, windows, car trunks, hatches, electrical enclosures, coolers, lids and more.
- SPECIAL SOUNDPROOF HOLES DESIGN - Unlike other sealing strips, VITAM AMO sealing strip has a special design with multi holes. The multi holes always reduce the sound propagation on both sides of the door, and they absorb a portion of the sound waves to reduce the noise. Also, these holes can effectively reduce the pressing force between the door and the door frame while the door is being closed, thereby reducing the sound of closing the door.
- Other Names: Roof Weather-Strip Clip, Door Weather-Strip Retainer Clip, Clip Weatherstrip
- Positions: Left Lower, Left Rear, Right Lower, Right Rear
- Replaces: 909120022, 909120030, 909120031
- Fits Into 6mm Hole
- Fits Subaru
Baja 2003-2006; Impreza 2002-2007; Impreza STI
2004-2007; Impreza WRX
2002-2007; Legacy 2010-2013, 2000-2007; Outback 2010-2013, 2000-2007; Tribeca 2006-2008; BRZ 2013-2019; Forester 2003-2008
SEOCONTENT-START
Bulletin Number: 12-250-23; Date: 07/10/23 Page 1 of 2 SERVICE BULLETIN Continued… CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS. Subaru
Service Bulletins are intended for use by professional technicians ONLY. They are written to inform those technicians of conditions that may occur in some vehicles, or to provide information that could assist in the proper servicing of the vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do the job correctly and safely. If a condition is described, DO NOT assume that this Service Bulletin applies to your vehicle, or that your vehicle will have that condition. Subaru
of America, Inc. is ISO 14001 Compliant ISO 14001 is the international standard for excellence in Environmental Management Systems. Please recycle or dispose of automotive products in a manner that is friendly to our environment and in accordance with all local, state and federal laws and regulations. NUMBER: 12-250-23 DATE: 07/10/23 APPLICABILITY: 2023MY BRZ SUBJECT: Rushing Wind Sounds from Front Door(s) INTRODUCTION: This bulletin announces a design change made to the front door partition glass. The run channel section of the front door partition glass has been fitted with an additional rib reducing the clearance between the glass and molding. This change has been introduced to address isolated cases of a windtype sound from the partition glass area. If a wind-type noise is detected in this area, follow the service procedures outlined in this bulletin. PRODUCTION CHANGE INFORMATION: The new front door partition glass has been incorporated into vehicle production as per the table below. Model Starting VIN BRZ P9702978 PART INFORMATION: REMINDER: Always order the most up-to-date replacement parts based on the specific VIN being repaired. Part Description Part Number GLASS-FRONT DOOR,PARTITION,RIGHT 61011CC201 GLASS-FRONT DOOR,PARTITION,LEFT 61011CC211 ATTENTION: GENERAL MANAGER q PARTS MANAGER q CLAIMS PERSONNEL q SERVICE MANAGER q IMPORTANT – All Service Personnel Should Read and Initial in the boxes provided, right. ©2023 Subaru
of America, Inc. All rights reserved. Bulletin Number: 12-250-23; Date: 07/10/23 Page 2 of 2 TESTING PROCEDURE: 1. After verifying the customer concern, apply masking tape on the right or left run channel section of the front door partition glass as shown in the image to the right (one side at a time). 2. Road test and determine if any wind-type sounds can be duplicated. If duplicated, the front door partition glass is NOT the fault and further diagnosis will be required. If NOT duplicated, the affected front door partition glass will require replacement. IMPORTANT: The front door partition glasses do not have to be replaced in pairs. ONLY the affected side(s) requires replacement. SERVICE PROCEDURE / INFORMATION: REMINDER: Customer satisfaction and retention starts with performing quality repairs. The service procedures for front door partition glass replacement remain unchanged. Always refer to the applicable Service Manual and review the full requirements of the repair being performed. The Service Manual procedures contain information critical to performing an effective repair the first time, every time. This includes but is not limited to important SAFETY precautions, proper inspection criteria, necessary special tools, required processes and related one-time-use parts needed for a complete and lasting repair. Refer to STIS: Body & Electrical/WIRING SYSTEM > GLASS/WINDOWS/MIRRORS > Front Door Glass WARRANTY / CLAIM INFORMATION: For vehicles within the Basic New Car Limited Warranty period or covered by an active Subaru
Added Security Classic or Gold plan, this repair may be submitted using the following claim information: Labor Description Labor Operation # Labor Time Fail Code DOOR GLASS R&R B914-511 0.6 WAE32 PARTITION GLASS &/or MOLDING R&R C914-410 0.2 IMPORTANT REMINDERS: • SOA strongly discourages the printing and/or local storage of service information as previously released information and electronic publications may be updated at any time. • Always check for any open recalls or campaigns anytime a vehicle is in for servicing. • Always refer to STIS for the latest service information before performing any repairs.
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END
This product presentation was made with AAWP plugin.





