Utility Hook – 2025 Subaru Forester

SEOCONTENT-START

△００
1
Part Number
el
ＫＦＪ－２１８
sed
① ② ③
Flat blade screwdriver Installation Completion Drawing
①Locations where utility hooks can be installed (symmetrical)
Precautions for Installation Make sure to install the utility hook correctly according to the installation manual.
Front of Vehicle
①
②
③
No.
２ １ １
Part Name
Quantity
UTILITY HOOK Installation Manual
Ｆ５５１０ＳＬ０１０ＦＯＲＥＳＴ
ＥＲ ２０２５ＭＹ～ Component Parts
Utility Hook Caution Label
Instruction Manual ２
Content
Revised Content Δ00 Δ01 Δ02 Created New
Date
Installation Instructions
１．Remove the trim cap with flat-blade screwdriver.
When fastening the utility hook ①, install it securely until it touches the vehicle trim and the utility hook ① does not rattle and turn.
Figure 1
Figure 2
Figure 3
２．Turn the utility hook ① clockwise by
hand to install it to the trim.
３．Tie on the caution label ② to the vehicle
rear side of the utility hooks ① installed
with reference to Figure 3.
Post-Installation Check
Check the following content.
・Check that there is no rattling or looseness in the utility hook.
・Check if the caution label is tied on to the utility hook. ・When attaching the utility bar, make sure to insert it into the hole in the center of the hook.
Attaching to other parts will cause damage to the hook.
13

[Reference] How to tie on the caution label ②
Front of Vehicle
Front of Vehicle
Front of Vehicle
①Utility Hook
The removed trim covers will not be re- used. Place trim covers in glove box.
②Caution Label
Please hand over the unused caution label
② to the customer.
Trim Cap
Caution
Caution
Tip
①Utility Hook

**************************************************************************************************************

**************************************************************************************************************

SEOCONTENT-END