Accessory Installation Guide
| 2025MY Forester – Utility Hook Power Rear Gate | F5510SL050 |
UTILITY HOOK RR GATE
Installation Manual
Genuine Part Number Ｆ５５１０ＳＬ０５０ＦＯＲＥＳＴ
Applicable Car Model ＥＲ ２０２５ＭＹ～
Installation Instructions
１．Remove the TRIM COVER of the rear gate with a flat blade screwdriver.
Caution
The removed trim covers will not be reused.
Place trim covers in glove box.
２．Fit the washer ③ to the turn nut ②, and temporarily insert it into the screw part of the utility hook ①.
３．Turn the utility hook ① clockwise by hand to install it to the rear gate.
Caution
When fastening the utility hook ①, install it securely until it touches the vehicle trim and the utility hook ① does not rattle and turn.
Tip
Make sure that the screws are tightened before installing the hooks. If the hook spins freely, use a flathead screwdriver to correct the direction of the turn nut (1) and check that the screws are tightened again (2). After checking, pull the hook downward and move the turn nut downward to install it (3).
４．Tie on the caution label ④ to the installed utility hook ①.
Post-Installation Check
Check the following content.
・Check that there is no rattling or looseness in the utility hook.
・Check if the caution label is tied on to the utility hook.
F5510SL050
- Replacement Models: Our cargo area utility hooks fit for Subaru Forester 2025-2026/ Outback 2026, replace F5510SL010
- Core Function: Our trunk hooks utilize the unused vertical space in the trunk to secure and hang items, preventing them from swaying, tipping over, or scattering while driving. This also improves the trunk's space utilization
- Weight Capacity Notes: Our trunk hooks have a maximum weight limit of 6.6 pounds. Hanging excessively heavy items may cause the hooks to break or damage the headrest metal rod. Please do not hang too many or too heavy items
- High-Quality Materials: Our trunk hooks are made of high-quality ABS plastic and metal, featuring a sturdy structure, wear resistance, high temperature resistance, and resistance to deformation and aging. They are suitable for hanging medium-weight items for daily travel
- Easy Installation: Simply insert the hook into the pre-drilled circular hole on the side wall of the trunk and rotate to secure it. No tools are required for removal, making them suitable for frequent daily use or temporary storage needs
- Rear Trunk Cargo Hook Set
- Genuine Subaru Part Number: F5510SL010
- Forester 2025 2026
- Outback 2026
- Positioned on the left and right sides of the cargo area to hang personal items and gear.
- 【Replace Part Number】F5510SL010
- 【Perfect Compatibility】The Rear Trunk Cargo Hook Set is compatible with the Subaru Forester 2025 2026.
- 【Safety & Easy Installation】Located on either side of the cargo hold, these are designed for hanging personal belongings and equipment. Installation is extremely quick and straightforward.
- 【Perfect Design】This versatile and practical hook can also be used to mount toolbars or secure cargo nets when installed vertically at the rear. Each set contains two hooks. Designed to hold carabiners at any angle, it enables easy hanging of rucksacks, mountaineering boots, and other gear.
- 【100% Satisfaction Guarantee】If you encounter any installation or usage issues, please contact our support team promptly. We ensure expert assistance within 24 hours. Your satisfaction is our priority. We strive to give our customers excellent service.
- The hook set fit for Subaru Forester 2025 2026 and for Outback 2026 ,for Upgrade your cargo area with this custom-fit utility hook set. Designed to mount seamlessly in the rear trunk area, these hooks provide a clean and convenient way to hang grocery bags, backpacks, emergency kits, charging cables, and other cargo without sliding around your trunk.
- The hook set is made of high-quality aluminum alloy materials and is sturdy and durable, with a long service life. It will not deform even when carrying heavy loads for a long time,helps organize items like bags and tools, preventing sliding and saving space. Ideal for commuting, shopping, or travel. Each set includes two hooks that can be mounted vertically to secure cargo nets or tool holders. The multi-angle snap ring allows easy hanging of gear such as backpacks or boots—practical and flexible.
- Positioned on the left and right sides of the cargo area to hang personal items and gear. This utility hook can also be used to mount a utility bar (included with Cargo Shelf accessory), or to anchor the Cargo Net when in rear vertical position. Comes in a set of two. 6.6 lb. weight capacity per hook. Designed to accommodate use of a carabiner in any position. Ideal to carry backpacks, hiking shoes or other gear.
- Park the vehicle on a flat surface, turn off the engine and engage the handbrake. Open the trunk, remove any items inside, and clean dust and oil from the anchor installation positions, confirm the product matches the anchor hole size and spacing of your vehicle's trunk. Test-fit the anchor ring to the hole before installation.
- How to install:Locate the Holes:1. Open the trunk and find the pre-drilled anchor holes on the interior panel;2.Remove the Cover: Gently pry off the plastic protective cover from the hole to expose the mounting hole;3.Assemble Parts: Thread the screw through the center hole of the anchor ring, with a lock washer (if included), ensuring the screw aligns with the mounting hole.
- 【Application】Dokili Rear Trunk Utility Hooks is compatible with Subaru Forester 2025 2026. Direct replacement for part number F5510SL010.
- 【Multi-Functional Trunk Organizer】Efficiently utilizes unused trunk vertical space to hang grocery bags, backpacks, camping gear, and sports equipment. Doubles as a rear vertical tie-down anchor for cargo nets and mounting utility bars.
- 【Neat & Spill-Proof Driving】Keeps shopping bags upright and personal items securely elevated while driving, preventing loose objects from rolling, sliding, or spilling across the cargo floor during sharp turns and sudden stops.
- 【Durable Material】Manufactured with high-impact ABS plastic and reinforced steel threaded studs. Built to resist wear, high temperature, and deformation, safely supporting up to 6.6 lbs (3 kg) per hook.
- 【Tool-Free Threaded Installation】 Features an integrated metal screw stud design for hassle-free installation. Hand-twist directly into the factory pre-drilled holes on your trunk side walls within seconds—no tools or drilling required.
SEOCONTENT-START
△００
1
F5510SL060(For Non-Power Rear Gate models requires the use of the Rear Gate Stopper
– Part Number J2010SL200)
Utility Hook
Turn Nut
Washer Caution Label
Instruction Manual
①
②
③
④
⑤
ＫＦＪ－２１９
No.
２ ２ ２ １ １
① ② ③
①Utility Hook
④ ⑤
Make sure to install the utility hook correctly according to the installation manual.
１．Remove the TRIM COVER of the rear gate
with a flat blade screwdriver.
Trim Cap
Installation Instructions
The removed trim covers will not be re- used. Place trim covers in glove box.
Part Name
Quantity
Figure 1
UTILITY HOOK RR GATE Installation Manual
Component Parts
Tools used
Installation Completion Drawing
Precautions for installation
Ｆ５５１０ＳＬ０５０ＦＯＲＥＳＴ
ＥＲ ２０２５ＭＹ～
Caution
Caution
Genuine Part Number
Applicable Car Model ２
Δ
Δ00 Δ01 Δ02
nt
Revised Content Created New
Date
9.
When fastening the utility hook ①, install it securely until it touches the vehicle trim and the utility hook ① does not rattle and turn.
Figure 3
３．Turn the utility hook ① clockwise by hand
to install it to the rear gate.
２．Fit the washer ③ to the turn nut ②,
and temporarily insert it into the screw
part of the utility hook ①.
Figure 2
②Turn Nut
③Washer
Make s e that the screws are tightened before installing the hooks. If the hook spins freely, use a flathead screwdriver to correct the direction of the turn nut (1) and check that the screws are tightened again (2). After checking, pull the hook downward and move the turn nut downward to install it (3).
Figure 4
Check the following content.
・Check that there is no rattling or looseness in the utility hook.
・Check if the caution label is tied on to the utility hook.
４．Tie on the caution label ④ to the installed utility hook ①.
④Caution Label
[Reference] How to tie on the caution label ④
Post-Installation Check
Hook
Turn
Nut Flathead screwdriver
(1)
(2) (3)
Caution Tip Tip
①Utility Hook
①Utility Hook
①Utility Hook
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END
This product presentation was made with AAWP plugin.