| “This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10176015
Manufacturer Communication Number: Subarunet Announ
Summary
Subaru is pleased to announce the release of software updates to the Subaru Midtronics DSS-5000 Battery Diagnostic Service system and DCA-8000 Dynamic Diagnostic Charging sytem.
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
|---|---|---|
| SUBARU | SUBARU | 9999 |
To: All Subaru Retailers
From: Subaru of America, Inc. – Service Department
Date: May 15, 2020
Subject: Midtronics Battery Test Equipment Software Updates
Today, we are pleased to announce the release of software updates to the Subaru Midtronics DSS-5000 Battery Diagnostic Service System and DCA-8000 Dynamic Diagnostic Charging System. The releases will update the software to revision “I” for the DSS-5000 and “C” for the DCA-8000.
What’s New – DSS-5000:
- Updated make/model table. The internal database has been updated with the latest information so that once the VIN is entered the correct testing parameters are applied
- Improved Wi-Fi connectivity
What’s New – DCA-8000:
- Updated make/model table. The internal database has been updated with the latest information so that once the VIN is entered the correct testing parameters are applied
- Updated testing logic
Update Notes:
- For issues related to the DSS-5000 or DCA-8000 please contact Midtronics customer support at 800776-1995.
- For issues related to the SDS network or the Brother printer please contact Nuspire at 877-782-7404 Please consult the DSS-5000 and DCA-8000 knowledge bases for more information.
Update Instructions:
- The DSS-5000 unit connected to the Nuspire “Subtronics01” Wi-Fi network will automatically check for updates. The easiest way to ensure your DSS-5000 automatically performs any available software updates is to always dock your DSS-5000 at the end of the day. Make sure the dock is connected to power, and that the Controller has Wi-Fi Internet access. The DSS-5000 will automatically wake itself up overnight to check for any available software updates and perform the installation without manual user intervention. If the update is skipped, it can be prompted at a later time manually using the “Check For Updates” prompt on the Settings / Version Information menu page.
- The DCA-8000 connected to the Nuspire “Subtronics01” Wi-Fi network will automatically check for updates when the tool is powered up for the first time each day. A notification is displayed on the screen when a new software update is available. Upon accepting the prompt, the update will download and install. The easiest way to ensure your DCA-8000 automatically performs any available software updates is to leave the DCA-8000 plugged into power overnight so the tool can automatically check for and install any available software updates. If the update is skipped, it can be prompted at a later time manually using the “Check For Updates” prompt on the Settings / Version Information menu page.
Warning: If the update is accepted, do not power off or otherwise stop the update from completing. If the update is stopped there is a risk that the firmware can become corrupted and if so, the tool must be sent to Midtronics for servicing.
Please note: Battery testing using Midtronics Battery Test and Charge equipment is required when performing battery replacement in all Subaru warranty cases except for leaking batteries.
Test results from DCA-8000 Dynamic Diagnostic Charging System and DSS-5000 Battery Diagnostic Analyzer including the Battery Test Code required for claim submission are automatically uploaded to the BMIS website for easy retrieval. Claims for battery test results not uploaded to BMIS may be rejected or debited. Please ensure your machines are updating test results to the BMIS server on a regular basis.
The DSS-5000, DCA-8000, GR8-1100 EST and EXP-1000S user manuals can be found on STIS.
If you have questions, please contact Subaru Service Operations at serviceoperations@subaru.com.
https://www.nhtsa.gov/recalls?nhtsaId=10176015
https://static.nhtsa.gov/odi/tsbs/2020/MC-10176015-0001.pdf
Loading...
Reload document 
Open in new tab
NHTSA ID Number: 10166935
Manufacturer Communication Number: Subaru retailers
Summary
Subaru has released a software update to the Subaru Midtronics DSS-5000 Battery Diagnostic Service System. The releases will update the software to revision H for the DSS-5000 controller.
1 Affected Product
To: All Subaru Retailers
From: Subaru of America, Inc. – Service Department
Date: October 23, 2019
Subject: Midtronics Battery Test Equipment Software Update
Today, we are pleased to announce the release of a software update to the Subaru Midtronics DSS-5000 Battery Diagnostic Service System. The releases will update the software to revision “H” for the DSS-5000 controller.
What’s New – DSS-5000:
- Bug fix. This update will correct issues with reporting the test code for a bad cell test result.
Update Notes:
- For issues related to the DSS-5000 or DCA-8000 please contact Midtronics customer support at 800776-1995.
- For issues related to the SDS network or the Brother printer please contact Nuspire at 877-782-7404 Please consult the DSS-5000 and DCA-8000 knowledge bases for more information.
Update Instructions:
- The DSS-5000 unit connected to the Nuspire “Subtronics01” Wi-Fi network will automatically check for updates. The easiest way to ensure your DSS-5000 automatically performs any available software updates is to always dock your DSS-5000 at the end of the day. Make sure the dock is connected to power, and that the Controller has Wi-Fi Internet access. The DSS-5000 will automatically wake itself up overnight to check for any available software updates and perform the installation without manual user intervention. If the update is skipped, it can be prompted at a later time manually using the “Check For Updates” prompt on the Settings / Version Information menu page.
Warning: If the update is accepted, do not power off or otherwise stop the update from completing. If the update is stopped there is a risk that the firmware can become corrupted and if so, the tool must be sent to Midtronics for servicing.
Please note: Battery testing using Midtronics Battery Test and Charge equipment is required when performing battery replacement in all Subaru warranty cases except for leaking batteries.
Test results from DCA-8000 Dynamic Diagnostic Charging System and DSS-5000 Battery Diagnostic Analyzer including the Battery Test Code required for claim submission are automatically uploaded to the BMIS website for easy retrieval. Claims for battery test results not uploaded to BMIS may be rejected or debited. Please ensure your machines are updating test results to the BMIS server on a regular basis.
The DSS-5000, DCA-8000, GR8-1100 EST and EXP-1000S user manuals can be found on STIS.
If you have questions, please contact Subaru Service Operations at serviceoperations@subaru.com.
https://www.nhtsa.gov/recalls?nhtsaId=10166935
https://static.nhtsa.gov/odi/tsbs/2019/MC-10166935-0001.pdf
Loading...
NHTSA ID Number: 10166900
Manufacturer Communication Number: Subaru Retailers
Summary
Subaru is pleased to announce the release of a software update to the Subaru Midtronics DSS-5000 Battery Diagnostic Service System and the DCA-8000 Dynamic Diagnostic Charging System.
SEOCONTENT-START
a subsidiary of Subaru Corporation
To: All Subaru Retailers
From: Subaru of America, Inc. – Service Department
Date: October 9, 2019
Subject: Midtronics Battery Test Equipment Software Update
Today, we are pleased to announce the release of a software update to the Subaru Midtronics DSS-5000 Battery Diagnostic Service System and the DCA-8000 Dynamic Diagnostic Charging System. The releases will update the software to revision “G” for the DSS-5000 controller and revision “C” for the base and to revision “B” for the DCA-8000.
What’s New – DSS-5000:
• Updated make/model table. The internal database has been updated with the latest information so that once the VIN is entered the correct testing parameters are applied
• Custom dual battery test flow for batteries that have different CCA ratings and chemistries
What’s New – DCA-8000:
• Updated make/model table. The internal database has been updated with the latest information so that once the VIN is entered the correct testing parameters are applied
• Custom dual battery test flow for batteries that have different CCA ratings and chemistries
• The default voltage level for Power Supply Mode has been changed from 14.5 to 13.5
• System Test alternator ripple issue has been fixed
Update Notes:
• For issues related to the DSS-5000 or DCA-8000 please contact Midtronics customer support at 800-776-1995.
• For issues related to the SDS network or the Brother printer please contact Nuspire at 877-782-7404
• Please consult the DSS-5000 and DCA-8000 knowledge bases for more information.
o https://subaru.dss5000.com/
o https://subaru.dca8000.com/
Update Instructions:
• The DSS-5000 unit connected to the Nuspire “Subtronics01” Wi-Fi network will automatically check for updates. The easiest way to ensure your DSS-5000 automatically performs any available software updates is to always dock your DSS-5000 at the end of the day. Make sure the dock is connected to power, and that the Controller has Wi-Fi Internet access. The DSS-5000 will automatically wake itself up overnight to check for any available software updates and perform the installation without manual user intervention. If the update is skipped, it can be prompted at a later time manually using the “Check For Updates” prompt on the Settings / Version Information menu page.
• The DCA-8000 connected to the Nuspire “Subtronics01” Wi-Fi network will automatically check for updates when the tool is powered up for the first time each day. A notification is displayed on the screen when a new software update is available. Upon accepting the prompt, the update will download and install. The easiest way to ensure your DCA-8000 automatically performs any available software updates is to leave the DCA-8000 plugged into power overnight so the tool can automatically check for and install any available software updates. If the update is skipped, it can be prompted at a later time manually using the “Check For Updates” prompt on the Settings / Version Information menu page.
a subsidiary of Subaru Corporation
Warning: If the update is accepted, do not power off or otherwise stop the update from completing. If the update is stopped there is a risk that the firmware can become corrupted and if so, the tool must be sent to Midtronics for servicing.
Please note: Battery testing using Midtronics Battery Test and Charge equipment is required when performing battery replacement in all Subaru warranty cases except for leaking batteries.
Test results from DCA-8000 Dynamic Diagnostic Charging System and DSS-5000 Battery Diagnostic Analyzer including the Battery Test Code required for claim submission are automatically uploaded to the BMIS website for easy retrieval. Claims for battery test results not uploaded to BMIS may be rejected or debited. Please ensure your machines are updating test results to the BMIS server on a regular basis.
The DSS-5000, DCA-8000, GR8-1100 EST and EXP-1000S user manuals can be found on STIS.
If you have questions, please contact Subaru Service Operations at serviceoperations@subaru.com.
SEOCONTENT-END
https://www.nhtsa.gov/recalls?nhtsaId=10166900
https://static.nhtsa.gov/odi/tsbs/2019/MC-10166900-0001.pdf
Loading...
| “This site contains affiliate links for which OEMDTC may be compensated” |
- [All in One, Keep your battery charged and your car ready to go] Battery Charger automotive 10-Amp 12V and 24V Fully-Automatic Smart, It's smaller but delivers more power. It's the all-in-one solution battery charger, battery maintainer, trickle charger, plus battery desulfator. Charge or repair all 12V and 24V lead-acid automotive, marine, and deep-cycle batteries, including AGM, GEL, SLA, and Flooded in cars, trucks, SUVs, motorcycles, lawnmowers, boats, marine, etc.
- [Enjoy Precision Charging, Your car deserves the best] Using a backlit LCD, the battery charger automotive clearly and visibly shows an LCD screen displaying the charging status and battery status; An integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates and under-charging in cold climates.
- [Restore your Battery, Don't let a dead battery ruin your plans] Built-in advanced battery REPAIR mode to help to recover old/idle batteries and extend battery life. Please use repair mode if the car battery charger cannot charge the battery. The high-frequency and low-frequency pulse technology has good repair and activation effects. Note: It can not activate a dead battery or repair a damaged battery. LITHIUM BATTERIES ARE NOT ALLOWED
- [8 Charging Protection, Never get stranded again] The charging cable contains heat-resistant and oxidation-resistant copper wire, which is not easy to break. It has protection circuits such as overcharge/overvoltage/overcurrent/short course, with functions such as overcurrent protection, short circuit protection, reverse connection protection, overheat protection, overvoltage protection, and Undervoltage protection.
- [Intelligent Memory] The Car Battery Charger mode has a memory function. After charging, it defaults to the state mode used before the last power failure. no complicated steps, just plug and charge. Note: Note: It‘s car battery charger, only the battery charging function. Requires power connection
- 【10-AMP QUICK CHARGER】12V 10-Amp and 24V 5-Amp 7-stage quick battery charger, charging speed is much faster than 8-Amp or 5-Amp automatic chargers. Charge or repair all 12-volt and 24volt lead-acid automotive, marine and deep-cycle batteries including AGM, GEL, SLA, Flooded in cars, trucks, SUVs, motorcycles, lawn mowers, boats marine, etc. NEW REPLACEMENT AVAILABLE FOR ANY QUALITY ISSUE.
- 【WINTER HOLIDAY BATTERY HOUSEKEEPER】Smart control, temp compensation in hot or cold climates, reverse protection, cooling system, overcurrent, fireproof material, overcharge, short circuit. Battery trickle charger with multiple protections ensures the safety of charging perfectly for maintaining batteries for months over the winter or holidays. Avoid battery failure in advance. No worries! Perfect household tool and gift for New Year!
- 【HIGH-EFFICIENCY PULSE REPAIR】Automatically detects battery sulfation and acid stratification, take newest pulse repair function to restore lost battery performance for stronger engine starts and extended battery life. Note: can not activate or charging totally dead batteries.
- 【VISUALIZED CHARGING】 Large LCD display the charging and battery status; charge voltage and current, inside temperature, charge percentage, summer mode, winter mode, etc. More convenient to use.
- 【PLUG AND PLAY】 no complicated steps, just plug and charge, stay at home and charge your batteries on your own. All-in-one battery solution as battery charger, battery maintainer, trickle charger, plus battery desulfator. The must-have tool for your garage
- Model:FLHFULIHUA Class 2 Power Unit Model:LKC-12010-E/ Input: 100V -240VAC 50/60Hz.0.3A /OUTPUT:12VDC 1000MA / 6 Ft Power Cable / 2.1mm * 5.5mm Center Positive Barrel Plug.
- Compatibility:12v Battery Charger For Ride On Toys compatible with 12v Best Choice Products Charger Wrangler SUV Best Choice Products Jeep Kid Trax Dynacraft Kids Jeep Car Mercedes-Benz Truck Audi Range Rove BMW I8 Ride On And More.
- Certified Safety:Our products have passed the ETL test and got the certificatesHigh efficient and safe to charge.
- State two color LED indicates stage of charge. Red light Charging/ Green Light Fully Charged.
- After-Sales Service:We provide 1 year warranty service, and 1 month unconditional return policy.
- For all 12V valve-controlled maintenance-free lead-acid batteries (motorcycle battery, car battery, backup power, ups, emergency power, solar, audio, fire power, security power, ATVs and Lawn Mowers, Electric Sprayer)
- Short Circuit Protection, more safety when charge your battery.
- Keep track of your battery loading status via the LED indicators so that you know when to unplug and go. (Red = charging, Green = Battery full)
- Notice: Only for 12V Sealed Lead Acid (SLA) Battery!!! Do not use this charger on other battery.
- 180 days quality assurance, any problems, feel free to contact us.
- 【LiFePO4 LEAD-ACID BATTERY CHARGER】12V 10-Amp and 24V 5-Amp 8-stage quick battery charger, charging speed is much faster than 8-Amp or 1-Amp automatic chargers. Charge or repair all 12-volt and 24volt LiFePO4 or lead-acid automotive, marine and deep-cycle batteries including AGM, GEL, SLA, Flooded in cars, trucks, SUVs, motorcycles, lawnmowers, boat marine, etc. NEW REPLACEMENT AVAILABLE FOR ANY QUALITY ISSUE.
- 【BRIGHTER SCREEN VISUALIZED CHARGING】 Extra large LCD screen not only clear to see under the sunlight but also displays the charging and battery status; charge voltage and current, inside temperature, charge percentage, summer mode, winter mode, etc. The lengthened 10ft charging cable is more convenient to use.
- 【UPGRADED 8-STAGE CHARGING AND TRICKLE MODE】The first battery charger that adopts 8-stage charging process, much safer and more efficient. Automatically enters trickle/float charging mode after fully charged, keep maintaining your batteries during this winter and more, leave batteries for holiday months and still brand new when you back.
- 【OVERALL CHARGING PROTECTIONS】Smart control, temp compensation in hot climates and under-charging in cold climates, reverse protection, cooling system, overcurrent, fireproof material, overcharge, short circuit. Battery trickle charger with multiple protections ensures the safety charging at anytime anywhere. No worries!
- 【HIGH-EFFICIENCY PULSE REPAIR】Automatically detects battery sulfation and acid stratification, takes the newest pulse repair function to restore lost battery performance for stronger engine starts and extended battery life. Note: can not activate or charge totally dead batteries.
- Meet the GENIUS1 - Similar to our G750, just better. It's 35% smaller and delivers over 35% more power. It's the all-in-one universal charging solution - battery charger, battery maintainer, trickle charger, float charger, plus battery desulfator.
- Do more with Genius - Designed for 6-volt and 12-volt sealed lead-acid automotive, marine, RV, powersport, and deep-cycle batteries, including flooded, gel, AGM, SLA, VRLA and maintenance-free, plus lithium-ion batteries (lifepo4).
- Enjoy precision charging - An integrated digital thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates and under-charging in cold climates.
- Charge dead batteries - Charges batteries as low as 1-volt. Or use the all-new force mode that allows you to take control and manually begin charging dead batteries down to zero volts.
- Restore your battery - An advanced battery repair mode uses slow pulse reconditioner technology to detect battery sulfation and acid stratification to restore lost battery performance for stronger engine starts and extended battery life.
- 【Battery Charger, Maintainer & Desulfator】An compact size portable 4 in 1 battery charger, battery maintainer, trickle charger, and battery desulfator. Perfect for all types of 6-volt and 12-volt lead-acid automotive, RV, powersport, and deep-cycle batteries, including flooded, gel, AGM, SLA, VRLA and maintenance-free batteries, suitable for cars, golf carts, motorcycles, boats, lawn mowers, marines, ATVs, UTVs etc.
- 【Visualized Charging with LCD Screen】The intelligent digital LCD screen clearly and visibly displays the charging status, charging percentage and voltage, charging current, etc. Always know how your battery charging is working.
- 【Pulse Repair to Restore Your Battery】Built-in advanced battery REPAIR technology, helps to restore the old/idle batteries lost performance and extend battery life. 7-stage charging program (desulfurization, trickle charging, constant current charging, constant voltage charging, battery current detection, compensation charging, Floating charging).
- 【Plug it and forget it & Trickle Charging】STD mode will automatically cut-off power after fully charged while trickle model will enter trickle charging and maintain your battery voltage at 12.5V. All around protection including short circuit, overload, low-voltage, high-voltage, overcharge, over-temperature, reverse-connection and over-current protection makes it really plug it and forget it.
- 【What You Get】 2 Year Warranty AND 100% SATISFACTION SERVICE. Extra long 6.6ft SAE standard cord with detachable alligator and ring connectors. Press and hold the MODE button for 5 seconds, and the charger will be forced to switch to 12V charging mode. If you are not pleased with the product, please contact NEXPEAK directly for hassle-free return and refund.
- POWERFUL PERFORMANCE: The Schumacher SC1281 delivers 100A engine start, a 30A boost, and 6A<>2A charge/maintain rates; Strong enough for cars, SUVs, and trucks
- 30A BOOST MODE: The boost modes quickly bring deeply discharged batteries back to life
- ADVANCED DIAGNOSTICS: A built-in battery and alternator tester determines charge level and helps diagnose electrical problems
- FULLY AUTOMATIC: The charger features multi-stage charging, bad battery detection, float mode monitoring, and reverse hook-up protection
- ADVANCED CHARGING ALGORITHM: Multi-stage charging employs an advanced algorithm to maximize battery charge, health, and lifespan
- 1️⃣【Multifunctional battery charger】:Our Lifepo4 battery charger 4 mode selection to handle different charging situations. It ensures an optimal charge for all 12-volt lead-acid automotive, marine, and deep-cycle batteries including CAR, AGM, MOTO, REPAIR, Flooded in cars, trucks, SUVs, motorcycles, lawn mowers, boats. Note: We have never sold this product to stores outside of xuecangzhong;
- 2️⃣【Smart Pulse Battery Repair】:Built-in advanced battery REPAIR mode to help to recover old/idle batteries and extend battery life.High-frequency and low-frequency pulse technology have a good repairing effect. NOTE: It can't activate a dead battery or repair a damaged battery.
- 3️⃣【Intelligent Security Protection】The product,with all around protection including short circuit, overload, low-voltage, high-voltage, overcharge, over-temperature, reverse-connection and over-current protection, ensuring a safe and efficient charging process while extending the battery life of your vehicle.
- 4️⃣【High-Efficiency Pulse Repair】:Built-in advanced battery REPAIR mode to help to recover old/idle batteries and extend battery life. If the battery cannot be charged, please use repair mode. The high-frequency and low-frequency pulse technology has good repair and activation effects. Note: It can not activate a dead battery or repair a battery that is damaged seriously.
- 5️⃣【Large Screen Color Display】Cool color icons show charging status and battery status, charging voltage, current, and battery percentage. Choose different modes with one click. Just plug and play, leave the car battery charger booster there to charge and maintain your battery, and automatically detect battery voltage, battery sulfation, and acid stratification.
- 【10-AMP QUICK CHARGER】12V 10-Amp and 24V 5-Amp 7-stage quick battery charger, charging speed is much faster than 8-Amp or 5-Amp automatic chargers. Charge or repair all 12-volt and 24volt lead-acid automotive, marine and deep-cycle batteries including AGM, GEL, SLA, Flooded in cars, trucks, SUVs, motorcycles, lawn mowers, boats marine, etc. NEW REPLACEMENT AVAILABLE FOR ANY QUALITY ISSUE.
- 【WINTER HOLIDAY BATTERY HOUSEKEEPER】Smart control, temp compensation in hot or cold climates, reverse protection, cooling system, overcurrent, fireproof material, overcharge, short circuit. Battery trickle charger with multiple protections ensures the safety of charging perfectly for maintaining batteries for months over the winter or holidays. Avoid battery failure in advance. No worries! Perfect household tool and gift for New Year!
- 【HIGH-EFFICIENCY PULSE REPAIR】Automatically detects battery sulfation and acid stratification, take newest pulse repair function to restore lost battery performance for stronger engine starts and extended battery life. Note: can not activate or charging totally dead batteries.
- 【VISUALIZED CHARGING】 Large LCD display the charging and battery status; charge voltage and current, inside temperature, charge percentage, summer mode, winter mode, etc. More convenient to use.
- 【PLUG AND PLAY】 no complicated steps, just plug and charge, stay at home and charge your batteries on your own. All-in-one battery solution as battery charger, battery maintainer, trickle charger, plus battery desulfator. The must-have tool for your garage
Last update on 2024-06-04 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
