| “This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10165544
Manufacturer Communication Number: 02-183-19
Summary
This Service Information Bulletin clarifies a bolt tightening sequence procedure for the three (3) turbocharger stay bracket mounting bolts. Torsional stress may remain in the stay bracket if the tightening sequence is not followed. The applicable Service Manual will be updated with this information soon.
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| SUBARU | ASCENT | 2019 |
INTRODUCTION:
This Service Information Bulletin clarifies a bolt tightening sequence procedure for the three (3) turbocharger stay bracket mounting bolts. Torsional stress may remain in the stay bracket if the tightening sequence is not followed. The applicable Service Manual will be updated with this information soon.
SERVICE PROCEDURE / INFORMATION:
REMINDER: Customer satisfaction and retention starts with performing quality repairs.
The illustration below shows the location of the bolts and the tightening sequence. The torque specification for all 3 bolts is 65 Nm (47.9 ft. lbs.).
SEOCONTENT-START
Bulletin Number: 02-183-19; Date: 09/26/19 Page 1 of 2
Continued…
NUMBER: 02-183-19
DATE: 09/26/19
APPLICABILITY: 2019MY Ascent
SUBJECT: Turbocharger Stay Bracket Bolt
Tightening Sequence
CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD
RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS.
Subaru Service Bulletins are intended for use by professional technicians ONLY. They
are written to inform those technicians of conditions that may occur in some vehicles,
or to provide information that could assist in the proper servicing of the vehicle. Properly
trained technicians have the equipment, tools, safety instructions, and know-how to
do the job correctly and safely. If a condition is described, DO NOT assume that this
Service Bulletin applies to your vehicle, or that your vehicle will have that condition.
Subaru of America, Inc. is
ISO 14001 Compliant
ISO 14001 is the international standard for
excellence in Environmental Management
Systems. Please recycle or dispose of
automotive products in a manner that is friendly
to our environment and in accordance with all
local, state and federal laws and regulations.
INTRODUCTION:
This Service Information Bulletin clarifies a bolt tightening sequence procedure for the three (3)
turbocharger stay bracket mounting bolts. Torsional stress may remain in the stay bracket if the
tightening sequence is not followed. The applicable Service Manual will be updated with this
information soon.
SERVICE PROCEDURE / INFORMATION:
REMINDER: Customer satisfaction and retention starts with performing quality repairs.
The illustration below shows the location of the bolts and the tightening sequence. The torque
specification for all 3 bolts is 65 Nm (47.9 ft. lbs.).
SERVICE INFORMATION BULLETIN
ATTENTION:
GENERAL MANAGER q
PARTS MANAGER q
CLAIMS PERSONNEL q
SERVICE MANAGER q
IMPORTANT – All
Service Personnel
Should Read and
Initial in the boxes
provided, right.
©2019 Subaru of America, Inc. All rights reserved.
Bulletin Number: 02-183-19; Date: 09/26/19 Page 2 of 2
IMPORTANT REMINDERS:
• SOA strongly discourages the printing and/or local storage of service information as
previously released information and electronic publications may be updated at any time.
• Always check for any open recalls or campaigns anytime a vehicle is in for servicing.
• Always refer to STIS for the latest service information before performing any repairs.
SEOCONTENT-END
NUMBER: 02-183-19
DATE: 09/26/19
https://www.nhtsa.gov/recalls?nhtsaId=10165544
https://static.nhtsa.gov/odi/tsbs/2019/MC-10165544-0001.pdf
Loading...
Reload document 
Open in new tab
- Full synthetic 0W-20 engine oil that is made with natural gas and designed for complete protection for top engine performance
- Helps extend engine life and protects for up to 15 years or 500,000 miles, whichever comes first. Guaranteed* (see Warranty Information in Product Description).
- Provides better fuel economy (based on the latest industry standards)
- Pennzoil Platinum 0W-20 keeps pistons up to 45% cleaner than the toughest industry standard (based on Sequence IIIH results)
- No other leading synthetic oil provides better wear protection from friction (Based on Sequence IVA wear test using SAE 5W-30)
- Superior wear protection on critical engine parts
- 6X better wear protection than industry standards, as measured in the latest Sequence IVA test
- Superior sludge cleaning and protection against new formation
- 1.3X better sludge protection than industry standards, as measured in Sequence VH sludge test vs. API SP limits
- Full synthetic formula provides thermal and oxidation stability
- ADVANCED PROTECTION AGAINST the four main causes of engine breakdown: wear friction heat and deposits
- 40% BETTER WEAR PROTECTION vs. industry standard as tested in the Sequence IVB engine test
- 25% BETTER DEPOSIT PROTECTION with superior engine cleaning detergents as tested in the GMOD engine test
- EXCEPTIONAL HIGH/LOW TEMPERATURE PROTECTION defends your motor no matter the weather conditions
- MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN, GM dexos 1 Gen 3
- Full synthetic 0W-20 motor oil provides strong engine performance and protection against deposits between oil changes
- Provides improved fuel economy (based on the latest industry standard)
- Designed to provide more performance with superior lubrication flow and pumpability at high and low temperatures (compared to Quaker State conventional and synthetic blend motor oils).
- Formulated with high resistance to oxidation, keeping the oil fresher for longer.
- Reduces friction to maximize horsepower (compared to Quaker State conventional and synthetic blend motor oils)
- 3X stronger against viscosity breakdown than leading full synthetic, based on Kurt Orbahn test in 5W-30 grade
- 10X better high temperature performance, as measured in Sequence IIIH engine test vs. API SP test limit
- 6X better wear protection, Protection for 10,000 miles between oil changes
- 1.4X better sludge protection, as measured in Sequence VH engine test vs. API SP test limit
- Meets ILSAC GF-6 to prevent low speed pre ignition (LSPI) and timing chain wear protection
- Full synthetic 0W-20 engine oil designed for vehicles with over 70,000 miles that offers the same protection as SAE 5W-20 and is made with natural gas
- Helps extend engine life and protects for up to 15 years or 500,000 miles, whichever comes first. Guaranteed* (see Warranty Information in Product Description).
- Keeps pistons up to 45% cleaner than the toughest industry standard (based on Sequence IIIH results)
- Provides unsurpassed wear protection for your engine (based on Sequence IVA wear test using SAE 5W-30)
- Formulated to deliver less oil burn off than high mileage motor oils made from crude oil
- Mobil Full Synthetic High Mileage 0W-20 motor oil is designed for vehicles with over 75,000 miles, upgrading from a conventional or synthetic blend, or requiring full synthetic motor oil
- Provides guaranteed protection that's 1.5X longer than our conventional and synthetic blend oils, up to 7,500 miles between oil changes*
- Helps to prevent oil leaks, sludge, and deposit formation to help reduce engine wear with a balanced additive system formulation and extra seal conditioner
- Provides excellent resistance to oil breakdown, for proven long-lasting protection, and maintains oil viscosity at high operating temperatures
- Recommended for all types of gasoline-powered vehicles, including those with turbocharged engines, and meets API SP resource-conserving
- Full synthetic 0W-20 engine oil with PurePlus Technology that is race-trusted for unbeatable engine protection*
- Pennzoil Ultra Platinum helps extend engine life and protects for up to 20 years or 750,000 miles, whichever comes first** (see warranty information in Product Description)
- No other leading motor oil provides better wear protection from friction (based on Sequence IVA wear test using SAE 5W-30)
- Far exceeds the most stringent car manufacturer requirements for cleanliness and protection (based on ILSAC GF-6)
- Helps protect engines from loss of power and provides better fuel economy (based on the latest industry standard)
- ULTIMATE PROTECTION AGAINST the four main causes of engine breakdown: wear, friction, heat and deposits
- 10X STRONGER AGAINST OIL BREAKDOWN vs. industry standards as tested in the Sequence IIIH
- 50% BETTER WEAR PROTECTION than industry standards as tested in the Sequence X engine test
- SUPERIOR CLEANING AND PERFORMANCE with Dual Defense Additive Technology to keep your engine running like new
- MEETS OR EXCEEDS ALL REQUIREMENTS of ILSAC GF-6A, API SP, API SN with SN PLUS, API SN, dexos 1 Gen 2
Last update on 2024-04-04 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.