“This site contains affiliate links for which OEMDTC may be compensated” |
Quick Reference Guide
2016MY BRZ Quick Reference Guide – MSA5B1606A
SEOCONTENT-START
Love. It’s what makes a Subaru, a Subaru
.
2016
Quick Reference Guide
BRZ
Complete U.S. specifications and
illustrations may not have been
available at time of publication.
Specifications are based on the
latest product information available
at time of publication. Some
images shown are for illustration
purposes only. Some equipment
shown may be optional at extra
cost. Specific options may be
available only in combination
with other options. Specific
combinations of equipment or
features may vary from time
to time and by geographic
area. Certain accessories and
equipment may not be available
at the time of publication.
This Quick Reference Guide
applies to all BRZ models.
Therefore, some explanations may
be for equipment not installed on
your vehicle. Subaru of America,
Inc., reserves the right to change
or discontinue at any time,
without notice, prices, colors,
materials, equipment, accessories,
specifications, models and
packages without incurring any
obligation to make the same or
similar changes on vehicles
previously sold. Colors shown may
vary due to reproduction process.
For detailed operating and
safety information, please
consult the Owner’s Manual.
Subaru, Outback, Legacy,
Forester, Impreza, BRZ, WRX,
WRX STI
, BOXER, SI-DRIVE,
Lineartronic, Alcantara, EyeSight,
HD Radio, Aha Radio and SiriusXM
are registered trademarks.
SUBARU STARLINK is a trademark
of Fuji Heavy Industries, Ltd.
All rights reserved. Contents may
not be reprinted or electronically
reproduced in whole or in part
without prior written approval
of Subaru of America, Inc.
© 2015 Subaru of America, Inc.
Table of Contents
2-3 Getting Started
4-5 Instrument Panel
6-7 Gauges
8-9 Personalize
10-15 Controls
16-19 While Operating
20-21 Safety/In Case of Emergency
22-23 Additional Information
2
Keyless Access with
Push Button Start System (if equipped)
By simply carrying the access key in your pocket, you can lock
and unlock doors, open the trunk lid and start your car without
ever having to take the key fob out of your pocket.
1
2
3
4
Remote Keyless Entry
1. Lock/Arm
• Press to lock all doors and trunk and
activate the security alarm.
• If any of the doors or the trunk are
not fully closed, an electronic chirp
will sound to alert you that the doors
or the trunk are not properly closed.
2. Unlock/Disarm
• Press once to unlock
the driver’s door.
• Press twice (within five
seconds) to unlock all doors.
• When the “Unlock/Disarm” button
is pressed, the dome and map
lights will illuminate if the dome light
switch is in the middle position.
3. Opening the Trunk Lid
• Press and hold to unlock the trunk lid.
An electronic chirp will sound.
4. Panic Alarm
• Press and hold; the horn will sound
and the hazard lights will flash.
• Press any button on the remote
to deactivate.
1
2 3
4
3
Getting
Started
Instrument
Panel Gauges Personalize Controls While
Operating
Safety/In Case
of Emergency
Additional
Information
Seating
Seat Controls
1. Forward/Backward
Pull up on the lever below the front of
the driver’s seat to move the seat forward
or backward.
2. Raise/Lower Seat Cushion
To adjust the height of the driver’s seat, push
or pull the seat height adjustment lever located
on the lower left side front of the seat.
3. Recline Seatback
To adjust the seatback to the desired
position, pull up on the recline lever located
on the lower left rear of the driver’s seat
or lower right rear of the passenger’s
seat. Do not adjust seats while driving.
4. Seatback Fold Strap
To get in and out of the back seats, pull
the seat strap to fold the desired seat.
When finished, push the seatback until
it locks in place.
Heated Seats
(if equipped)
Switches are located on the
center console between the
driver and passenger seats.
Choose low (bottom of switch)
for normal heating or high
(top of switch) for rapid heating.
Choose the center position to
turn off the seat heaters.
1
2
3
Folding Down the Rear Seats
Lower the headrests. Open the trunk and pull the release strap on the seat side
that you want to fold down. To return the seatback to its original position, raise
the seatback until it locks into place and make sure that it is securely locked.
4
Getting
Started
4
Instrument Panel
6-7
PAGE
NUMBER 10
PAGE
NUMBER
5
Getting
Started
Instrument
Panel Gauges Personalize Controls While
Operating
Safety/In Case
of Emergency
Additional
Information
Clock
Press the “H” button to adjust the hours
and the “M” button to adjust the minutes.
Vehicles with a navigation system, please
refer to the separate booklet “Operating
Instructions for Navigation System.”
11 12-13 14
Instrument
Panel
6
Immediate Attention
Caution
Informational
Gauges
Seatbelt warning
Front passenger
seatbelt warning
SRS airbag system
Engine immobilizer
indicator light
Door open
Charge warning
Oil pressure warning
Power steering warning
REV indicator
Hot coolant temperature/
Cold coolant temperature
High beam indicator light
AT OIL TEMP
(Automatic Transmission)
ABS warning
Low fuel
SNOW indicator
(Automatic Transmission)
Slip indicator
Speedometer Tachometer
Outside temperature, trip meter and odometer
7
Getting
Started
Instrument
Panel Gauges Personalize Controls While
Operating
Safety/In Case
of Emergency
Additional
Information
VSC off
CHECK engine/
Malfunction indicator
Tire pressure warning light
Front passenger frontal
airbag OFF/ON
Headlight leveler
(if equipped)
TRAC OFF indicator
VSC SPORT indicator
Smart key system
(if equipped)
Turn signals
Front fog light indicator
light (if equipped)
Cruise control
indicator light
Cruise control set
indicator light
SPORT indicator
(Automatic Transmission)
Gauges
Digital Speedometer Fuel gauge
Temperature gauge
8
Personalize
Tilt Steering Column
Push the lever down firmly to adjust the height position of the column; firmly push the lever
back up to lock the column in place. Do not adjust while driving.
Power Exterior Mirrors
Turn the knob to the “L” to adjust the left-hand mirror or to the “R” to adjust the right-hand
mirror. Move the knob in the direction you want to move the mirror. Then return the knob to
the neutral/center position.
9
Getting
Started
Instrument
Panel Gauges Personalize Controls While
Operating
Safety/In Case
of Emergency
Additional
Information
Trunk Lid Cancel Button
Prevent unauthorized entry into the trunk by locking the trunk release lever. Press
the trunk lid cancel button to lock the trunk release lever. The trunk can only be
opened using the master key. Press the button in to unlock the trunk release lever.
km/h – MPH, ODO – TRIP and DISP Buttons
1. Press this button to change the digital display from km/h to MPH. Press again
to switch back.
2. Press this button to cycle through the odometer, trip meter A, trip meter B,
the setting screen for the tachometer needle or the setting screen for the shift
position indicator.
3. Press this button to cycle through the outside temperature, current fuel
consumption, average fuel consumption or the setting screen for the
REV indicator.
1
2
3
Personalize
10
Controls
Light Controls
Illumination
Brightness Control
While the light switch is on, rotate the dial
downward to dim the instrument panel
illumination. Rotate the dial upward to
make the illumination brighter. When the
dial is fully rotated upward, the instrument
panel illumination becomes full bright.
Headlight Beam Leveler
High-Intensity Discharge (HID) headlights
generate more light than conventional
halogen headlights. Therefore, a driver of an
oncoming vehicle may experience too much
glare when your headlight beam height
adjustment is high because the vehicle is
carrying a heavy load. The headlight beam
leveler can be used to adjust beam height
to avoid such a condition. To lower the
beam, turn the knob to the higher numbers.
Turns on headlights, instrument
panel illumination, parking lights,
tail lights and license plate lights.
Push up
for right
turn signal.
Push forward to change from low
beam to high beam. Pull the lever
back to center to return to low beam.
Push down for
left turn signal. Turns on
fog lights
(if equipped).
Turns on instrument panel
lights, tail lights, parking lights
and license plate lights.
AUTO (if equipped): The vehicle’s lights
are automatically on or off, depending
on the level of outside light.
11
Getting
Started
Instrument
Panel Gauges Personalize Controls While
Operating
Safety/In Case
of Emergency
Additional
Information
Windshield Wipers
To turn on the wipers, press the wiper control lever down one level for intermittent,
two levels for low, or three levels for high speed. Return the lever to the “OFF”
position to stop the wipers. For a single wipe, move the lever up. To spray washer
fluid, pull and hold the lever toward you.
Daytime Running Lights
Daytime running lights are standard on your vehicle. Only a reduced brightness
high beam will be automatically turned on when the engine has started, the
parking brake is fully released and the light switch is in the “OFF” or “ ”
position. The brightness of the illumination of the high beam headlights is reduced
by the daytime running light system. You must always switch on your headlights
when it is dark outside by turning the light switch to the “ ” position.
OFF
1
2
3
INT.
LOW
HIGH Controls
12
Controls
1
5
3
2
6
4
Manual Climate Control
1. Air Flow Control Dial
The air flow control dial allows you to
choose the direction of air flow. Rotate the
dial for the desired air flow position.
Defrost/Defog
To clear the windshield and front door
windows of fog or frost, rotate the air flow
control dial to the defrost position, set the
temperature control to the red position,
and set the fan speed control to the
fastest speed.
2. Rear Window Defogger Button
Press the rear window defogger button
to turn on the defogger. The defogger
will automatically shut off after about 15
minutes. If the window clears before that
time, you can press the button again to
turn it off.
3. Fan Speed Control Dial
Rotate the fan speed control dial to select
one of four fan speeds.
4. Air Conditioning Button
Press the “A/C” button to activate the air
conditioning. Press it again to turn off the
air conditioning.
5. Recirculated/Outside Air Button
Press the air inlet selection button to
prevent outside air from being drawn into
the passenger compartment. If the button
is pushed in, press it again to draw outside
air into the compartment. TO PREVENT
WINDSHIELD FOGGING, DO NOT
REMAIN IN THE RECIRCULATED MODE
FOR AN EXTENDED PERIOD OF TIME.
6. Temperature Control Dial
Rotate the temperature control dial from
blue for cool, to red for warm.
13
Getting
Started
Instrument
Panel Gauges Personalize Controls While
Operating
Safety/In Case
of Emergency
Additional
Information
Automatic Climate Control System (if equipped)
1. Automatic On and Off
This system automatically controls
outlet air temperature, fan speed,
air flow distribution, air inlet control,
and air conditioner compressor
operation. Press “AUTO” to activate.
Push “OFF” to turn off the system.
2. Temperature Control Dials
Rotate the dial to select a temperature
and maintain a comfortable climate
within the driver and passenger
compartment. Temperature is
displayed digitally on the screen.
Separate temperature settings
can be adjusted for the driver’s
side and passenger’s side.
Operation in Manual Mode
3. Recirculated/Outside Air Switch
Push the air inlet selection switch to
prevent outside air from being drawn
into the passenger compartment.
Push the switch again to allow
outside air into the compartment.
TO PREVENT WINDSHIELD
FOGGING, DO NOT REMAIN IN THE
RECIRCULATED MODE FOR AN
EXTENDED PERIOD OF TIME.
4. Fan Speed Control Dial
In the automatic setting, the system
determines the fan speed to achieve
the desired temperature, or you can
manually rotate the fan speed control
dial to select one of seven fan speeds.
5. Air Flow Mode Selection Button
Press the button to select the desired
air flow mode. The selected air flow
mode is shown on the display above.
6. Dual Mode Switch
Push the “DUAL” switch to activate
or deactivate the dual mode. Dual
mode makes it possible to have
separate temperature settings for the
driver’s side and passenger’s side.
7. Air Conditioner Switch
Push the “A/C” switch to activate
the air conditioning. Push it again
to turn off the air conditioning.
8. Front Defroster Button
Press the button to defrost
or dehumidify the windshield
and front door windows.
9. Rear Window Defogger Switch
Push the switch to turn on the
defogger. It will automatically shut off
after about 15 minutes. If the window
clears before that time, you can
push the switch again to turn it off.
1
2
5
1 6 3 7 9
4
8
2
Controls
14
Driving Systems/Modes
To help enhance driving safety and performance,
the following systems operate automatically in
response to various driving situations.
1. If the vehicle gets stuck in mud, dirt or
snow, the traction control system may
reduce power from the engine to the
wheels. Turning the system off may make
it easier for you to rock the vehicle in order
to free it. Press the button again to turn
the traction control back on.
2. Your vehicle is equipped with two types of
control modes to accommodate various
driving preferences. The control modes
can be selected with the “VSC SPORT”
button. Normal mode allows secure and
smooth normal driving. When the button
is pressed, Vehicle Stability Control (VSC)
SPORT mode is activated.
3. If equipped, push the switch toward the
“SPORT” mode for sporty driving or when
driving in mountainous regions with lots of
curves. To cancel sport mode, push the
switch toward “SPORT” mode again.
If equipped, push the switch toward
the “SNOW” mode for accelerating and
driving on slippery road surfaces, such as
snow. To cancel snow mode, push the
switch toward “SNOW” mode again.
For more detailed information, please refer to
your Owner’s Manual.
Controls
1
3
2
USB Port (if equipped)
The USB port is located underneath the climate controls. You can connect
a USB-equipped portable music player to the USB port and hear the music
stored on it through the vehicle speakers. Press the “SOURCE” button located
on the audio system repeatedly until the USB mode is selected.
Auxiliary Input Jack
The 3.5 mm auxiliary input jack is located
underneath the USB port. You can connect
a portable music player to the auxiliary jack
and hear the music stored on it through the
vehicle speakers. Press the “SOURCE” button
located on the audio system to select the
auxiliary mode.
15
Getting
Started
Instrument
Panel Gauges Personalize Controls While
Operating
Safety/In Case
of Emergency
Additional
Information
Cruise Control
Increase speed
Push the lever up to the “RES” side;
hold until your vehicle reaches the
desired speed and release. To increase
speed using the accelerator pedal,
press the pedal until you reach the
desired speed. Push the lever down
to the “SET” side to set the speed.
Decrease speed
Push the lever down to the “SET”
side; hold until your vehicle slows to
the desired speed and release. To
decrease the speed using the brake
pedal, press the pedal to release cruise
control temporarily. When the speed
decreases to the desired speed, push
the lever down to the “SET” side to set
the speed.
To cancel the cruise control, pull the
lever toward you, push the brake
pedal or press the “ON-OFF” button.
If you have a manual transmission,
you can push in the clutch pedal.
Press the accelerator pedal until
your vehicle reaches the desired
speed. Push the lever down to the
“SET” side and release. Ease off
the accelerator pedal. Your vehicle
will maintain the desired speed.
To activate the cruise control,
press the “ON-OFF” button. The
cruise control indicator light on
the instrument panel will turn
on. To deactivate cruise control,
press the “ON-OFF” button again.
To resume your speed after
canceling, push the lever
up to the “RES” side.
Controls
16
While Operating
Trunk and Fuel Filler Lid Releases
The vehicle is equipped with trunk and fuel filler lid releases. To open the trunk, press the
trunk lever button. To open the fuel filler lid, pull the fuel filler lever up and release.
Paddle Shift Control Switches (if equipped)
• Temporary use: Even when
the selector is in the “D” (Drive)
position, you can temporarily
shift the gear by pulling the
“+” or “-” paddle shift control
switch. The transmission will
automatically switch back to
Normal Mode.
• When the selector lever is in
Manual Mode, shift to the next
higher gear by pulling the “+”
paddle shift control switch on
the steering wheel. Pull the “-”
paddle shift control switch to
shift into the next lower gear.
17
Getting
Started
Instrument
Panel Gauges Personalize Controls While
Operating
Safety/In Case
of Emergency
Additional
Information
Automatic Transmission Shift Mode
The automatic transmission gives you ultimate control with two different driving
modes: Normal Mode and Manual Mode.
Normal Mode
When the selector lever is in the “D” (Drive) position, the transmission is in
Normal shift mode. The shift position indicator on the instrument panel shows
“D” and the transmission automatically shifts into a suitable forward gear.
Manual Mode
In Manual Mode, you select the desired gear position to obtain necessary
acceleration and engine braking. Moving the selector lever left into the manual
gate 1 from the “D” (Drive) position causes the transmission to change into
Manual Mode. To shift, use the paddle shift control switches or gear lever. The
shift position indicator shows the selected gear position.
When Manual Shifting Operation is Possible
• Arrow-shaped indicator lights in the center of the instrument panel show
whether an upshift is possible and whether a downshift is possible.
– Both arrows are on: Upshifting and downshifting are both possible.
– Up arrow only is on: Only upshifting is possible.
– Down arrow only is on: Only downshifting is possible.
1
While
Operating
18
BRZ Engine Compartment
1
1. Air Cleaner Element
This element filters intake air. Follow the
maintenance guidelines in your “Warranty
and Maintenance Booklet”. When
necessary, replace this element with a
genuine Subaru air cleaner.
2. Engine Coolant Reservoir
Check your coolant level at each fuel stop.
Observe the coolant level on the outside
of the reservoir while the engine is cool. If
the level is close to – or lower than – the
“LOW” level mark, add coolant to the
“FULL” level mark. If the reserve tank is
empty, remove the radiator cap and refill
as required. Please refer to your Owner’s
Manual for details.
3. Radiator Cap
If your engine overheats, safely pull off the
road and stop your vehicle in a safe place.
Never attempt to remove the radiator cap
until the engine has been shut off and has
fully cooled down. If steam is coming from
the engine compartment, turn the engine
off and move everyone away from the
vehicle until it cools. Please refer to your
Owner’s Manual for details.
4. Main Fuse Box
Your BRZ has two fuse boxes. One is
located under the instrument panel,
behind the fuse box cover on the driver’s
seat side. The other is housed in the
engine compartment, as shown here.
Fuses are designed to melt during an
overload situation in order to prevent
damage to the wiring harness and
electrical equipment. If any lights,
accessories or electrical controls
fail to operate properly, inspect the
corresponding fuse. If it has melted
or appears discolored, replace it in
accordance with the instructions in your
Owner’s Manual. The fuse puller and spare
fuses are located in the main fuse box in
the engine compartment.
3 9
5 8
7
2
4
6
19
Getting
Started
Instrument
Panel Gauges Personalize Controls While
Operating
Safety/In Case
of Emergency
Additional
Information
5. Engine Oil Level Gauge
Check the engine oil level at each
fuel stop. Pull out the dipstick,
wipe it clean, and insert it again.
Pull it out and check the oil level. If
it is below the lower level, add oil
to bring the level up to the upper
level. Use only engine oil of the
recommended grade and viscosity.
Please refer to your Owner’s Manual
for oil recommendations and other
important details.
6. Battery
When your vehicle does not start
due to a battery that has run down,
the vehicle may be jump-started
by connecting your battery to
another battery with jumper cables.
Jump-starting is dangerous if done
incorrectly. Please refer to your
Owner’s Manual for instructions.
If you are unsure about how to jumpstart
your vehicle, please consult a
competent mechanic.
7. Brake Fluid Reservoir
Check your brake fluid level monthly.
Observe the fluid level on the outside
of the reservoir. If the level is below
the “MIN” level mark, add the
recommended brake fluid (FMVSS
No. 116, fresh DOT 3 or 4 brake fluid)
to the “MAX” level mark. Use only
brake fluid from a sealed container.
8. Engine Oil Filler Cap
Change your oil according to
the maintenance schedule in
your “Warranty and Maintenance
Booklet.” Your engine oil must be
changed more frequently when you
drive on dusty roads, frequently
make short trips, or when you drive
in extremely cold weather.
9. Windshield Washer Tank
It is a good idea to check your
washer fluid every time you stop
for fuel. If the level is low, fill the
windshield washer tank to the neck of
the reservoir with windshield washer
fluid. In cold weather, use a freezeresistant
windshield washer fluid.
While
Operating
20
Safety/In Case of Emergency
Child Restraint System
For maximum safety, first carefully read the LATCH system instructions from the device
manufacturer, as well as the installation instructions in your Owner’s Manual, to properly
install the LATCH compatible child restraint system. Use the appropriate seatbelts or
anchorages provided in your vehicle. Children age 12 and under must properly occupy
the rear seat at all times.
Internal Safety Trunk Release with Self-Illuminating Handle
In the event that children or adults become locked inside the trunk, this luminescent handle
allows them to open the lid from inside the trunk. To open, simply pull the yellow handle
downward as indicated by the arrow on the handle, and then push up on the lid.
21
Getting
Started
Instrument
Panel Gauges Personalize Controls While
Operating
Safety/Case
of Emergency
Additional
Information
Location of Spare Tire and Jack
A spare tire, jack, jack handle, towing eyelet, screwdriver and wheel nut wrench are
stored under the floor of the trunk.
Subaru Roadside Assistance
Subaru Roadside Assistance is free and standard on every 2016 BRZ vehicle.
Coverage is automatic; there are no forms to complete. Subaru Roadside
Assistance is available anytime during the 3-year/36,000-mile Subaru Limited
Warranty, whichever comes first.* A Subaru Roadside Assistance decal has been
affixed to the driver’s door window.
Subaru Roadside Assistance: 1-800-261-2155
Exclusions
Specifically excluded from Subaru Roadside Assistance coverage are service
requests or claims resulting from: accidents, vandalism, acts of God, violation
of any laws, misuse and abuse, or vehicle modifications not recommended by
the manufacturer.
*See your retailer for details.
Safety/In of Emergency
22
Additional Information
Fuel
Use premium unleaded gasoline with an octane rating of 91 AKI or higher. Consult the
Owner’s Manual for more detailed information.
Fuel Capacity
• 13.2 US gal (50 liters, 11 Imp gal)
• When the low fuel indicator light is displayed on the instrument panel, approximately
1.8 US gal (7.0 liters, or 1.5 Imp gal) of fuel remain.
• If you have recently fueled your vehicle, the check engine light on the
instrument panel may stay on due to a missing or loose fuel filler cap
(the cap should be tightened until a click is heard).
23
Getting
Started
Instrument
Panel Gauges Personalize Controls While
Operating
Safety/In Case
of Emergency
Additional
Information
Engine Oil
Use only the following oils:
• ILSAC GF-5, which can be identified with the ILSAC certification mark
(Starburst mark).
• Or API classification SN with the words
“RESOURCE CONSERVING.”
– Use 0W 20 synthetic, replacement interval 6,000 miles under normal
driving conditions. No requirement at the first 3,000 miles.
Engine Oil Capacity
• Without filter: 5.5 US qt (5.2 liters, 4.6 lmp qt)
• With filter: 5.7 US qt (5.4 liters, 4.8 lmp qt)
Additional
Information
Notes
Delivery Information
Vehicle Condition
Exterior/Interior is clean and undamaged
Verify that all equipment, accessories and options
are present
Retailer Orientation
Parts & Service departments locations & hours
Service Advisor introduction and/or business card
Service appointment & “Early Bird”
drop-off procedures
Manuals & Warranties
Review vehicle manuals & maintenance schedule
Review warranty information
(Basic, Powertrain, Tire, Wear Items & Adjustments)
Review Subaru Roadside Assistance 1 (800) 261-2155
Registration & Appointment
MySubaru/SUBARU STARLINK™ Registration
Enrolled No Thanks
1st Service Appointment
Scheduled No Thanks
V.I.N.________________________________________________________________________________
Delivery Date________________________________________________________________________
Owner(s)____________________________________________________________________________
Phone #_____________________________________________________________________________
Email_ ______________________________________________________________________________
Note any exceptions:_________________________________________________________________
____________________________________________________________________________________
____________________________________________________________________________________
Vehicle Delivery Checklist
Steering Wheel & Instrument Panel
Master and Valet Keys, Keyless Access System
operation, Push Button Start* and Remote Start*
Tilt/Telescopic Steering Column Adjustments
and Paddle Shift operation*
Front & Rear* Wiper and Washer Controls
Headlights, DRL, Parking Lights, Hazard Lights,
Interior Lights, and Fog Lights*
Gauges, Warning Lights, Multi Function Display*
settings and Parking Brake operation
Safety, Comfort & Convenience
All Wheel Drive System, Emergency towing of AWD,
VDC, X-Mode* and Hill Holder* operation
Rear Vision Camera*
All Weather Package operation – Heated Seats,
Exterior Mirrors & Windshield Wiper De-icer
Review operation of climate control system
Power windows, locks, exterior mirrors, seat
and Power Moonroof* operation
Hood Release and fluid reservoir locations
Fuel Filler Door, Trunk Release, Rear Gate operation
and location of Spare Tire*, Jack & Tools
STARLINK Audio System & Bluetooth
Bluetooth – Pair owner’s phone(s) & show operation
(Download SUBARU STARLINK and MySubaru Apps*)
STARLINK Audio* and Navigation* system controls
(Sources, Presets, List & Back buttons)
Driver Assist Technology
Subaru EyeSight™ System* and SRF*
Blind Spot Detection* and Rear Cross Traffic Alert*
*If Applicable
Owner Signature(s)_________________________________________________________________
Subaru Sales Consultant____________________________________________________________
Subaru Sales Manager_____________________________________________________________
Subaru of America, Inc., Subaru
Plaza,
P.O. Box 6000, Cherry Hill, NJ 08034-6000
MSA5B1606A
Issued December 2015
Printed in USA 12/15
SEOCONTENT-END
- BUFF OUT IMPERFECTIONS: Meguiar's Ultimate Compound removes scratches, swirls & oxidation for a clear, perfect finish
- SHOWROOM SHINE: Advanced car compound removes scratches, swirls, oxidation & water spots and restores color & clarity for a showroom shine in minutes
- CLEAR COAT SAFE: Auto compound safely removes scratches and other defects without hazing on clear coats & all gloss paints. Easy DIY fix by hand or da polisher
- LIKE-NEW SHINE: Meguiar's exclusive micro-abrasive technology quickly removes scratches & restores clarity and shine for a stunning, swirl-free finish.
- FAST & FLAWLESS: Meguiar's Ultimate Compound cuts fast, removes scratches and swirls without hazing, leaving a pro-detailer finish.
- 3-IN-ONE CERAMIC TECHNOLOGY: One 16 fl oz bottle of Nu Finish Once a Year Polish and Sealant, a car polish and paint sealant with 3-in-1 Ceramic Technology to repair, seal and repel
- REPAIRS SCRATCHES AND RENEWS SHINE: Long-lasting auto polish that helps repair fine swirls, scuffs and scratches while renewing the shine on paint and chrome, leaving a glossy, wet finish without any wax
- PREVENTS FUTURE SCRATCHES: Innovative Ceramic Technology forms an effective, durable protective barrier that helps prevent future scratches from forming and delivers extreme water beading for easier maintenance
- NO RUBBING OR BUFFING: Unique liquid polish that requires no rubbing or buffing and can even be applied in direct sunlight, unlike conventional car wax
- THE ONCE A YEAR CAR POLISH AND SEALANT: With just one application, you can polish and protect your car’s paint for an entire year* (*Based on U.S. average automatic car washes per year)
- EASY SCRATCH and SWIRL REPAIR - If your car has light scratches, swirls, or other marks - you can easily fix that with our Scratch & Swirl Remover Kit! Using the included buffer pad, our specially formulated compound will allow you to easily remove and "erase" years of wear and tear from your vehicles paint and overall appearance!
- ULTIMATE PAINT REPAIR- Not only will this remove swirls and scratches, it will restore the gloss and shine of your paint and bring it back to its original brilliance! The special rubbing compound will remove water spots, oxidation and other contaminants from your paint!
- PREMIUM CHEMICALS - We formulate all our products to ensure they are the best! Professional grade, but easy enough for anyone to use! We use only the absolute best chemicals and ensure there are no unnecessary color dyes or scents!
- ADVANCED SOLUTION FOR ALL PAINT TYPES - Car paint scratch repair is safe to use on all paints and colors. You can safely use it on any clearcoat, single stage, or multi stage paint!
- REVOLUTIONARY PRODUCT - This scratch remover for vehicles provides an effortless and secure way to remove scratches.
- CLEANER WAX: One-step liquid wax cleans your paint while you wax
- HIGH GLOSS SHINE: Rich conditioning oils polish and protect, leaving finish with a high gloss shine
- SAFE ON ALL GLOSSY FINISHES: Safely and effectively cleans surface contaminants and blemishes from all glossy paint finishes including clear coats and single-stage paint
- EASE OF USE: Easier to use than traditional carnauba wax
- VERSATILE APPLICATION: Can be applied by hand or Dual Action Polisher like Meguiar's MT300
- Silicone Free Means You Get True Results, What You See Is What You Get Even After Weeks Of Washing This Is A True Polish That Prepares Any Paint For The Perfect Sealant
- Works Great As A Final Step Product That Produces An Exceptional Shine
- Rapidly Removes Light Scratches, Key Scratches, And Most Imperfections, Removes Light Scratches And Swirl Marks Resorting Color And Shine
- Package Weight :15.0Lbs
- Brings Back That Showroom Shine, Removes Light Scratches And Swirl Marks Resorting Color And Shine, Body Shop Safe, Premium Gloss And Shine After Water Sanding
- Advanced Formula 3-in-1. Our fortify quick coat is your all-in-one ceramic coating hydrophobic spray. Shine Armor Fortify Quick Coat ceramic car wax provides a waterless wash, coat, and shine, all-in-one convenient product.
- No Streaking, Smearing Or Scratching. Shine Armor Fortify Quick Coat premium formula ceramic car coating is a gentle and effective car polish for any vehicle! Get a clean, shiny finish without hurting your car's paint.
- Cuts Dirt, Grime & Grease. Our Quick Coat ceramic wax car sealant eliminates dirt, grime & grease instantly! Our signature 3-in-1 formula gives you a waterless car wash, coat and shine for a clean, showcase look.
- Safe For All Surfaces. Use this car wax spray-on automobiles, boats, motorbikes, RVs, four-wheelers and more! This spray wax is the perfect blend of surfactants and SiO2 ceramic-coating science.
- Superior Products. This means superior shine for your cars! Our ceramic quick coat also works as a sealer to give your vehicle a clear shield of protection while also providing a beautiful gloss. Which makes our ceramic spray the perfect Christmas Gift for the gearhead in your life!
- The polish gives deep reflections & a hi-gloss paint finish
- Eliminates fine swirl marks
- Conditioning oils add depth of colour and maximum gloss prior to waxing, especially on dark coloured cars
- Quickly and gently removes fine swirls and towel marks for mirror-like reflections
- Safe and on all glossy paints, including clear coats.Pre-waxing glaze that prepares the surface for wax while offering deep reflections and high gloss
- DEFECT REMOVAL: M105 Ultra-Cut Compound is the perfect addition to your car cleaning supplies as it removes moderate to heavy paint defects like scratches, oxidation, swirls, acid rain, and even cuts through up to 1200 grit sanding marks
- ULTRA-FAST COMPOUNDING: Ultra-fast cutting ability removes 1200 grit or finer sanding marks, while micro-abrasives minimize further swirling for superior car cleaning while boosting gloss and shine
- ENHANCE GLOSS & SHINE: M205 Ultra Finishing Polish is a professional polish that permanently removes light swirls and holograms and further refines your paint while adding deep gloss, shine, and rich, swirl-free results
- CLEAR COAT SAFE: Safe and effective on all glossy paint finishes including clear coats. Both professional formulas work to remove paint defects and increase gloss without causing damage to the paint
- MULTIPLE WAYS TO APPLY: Formulated for use by hand, dual action polisher, or rotary buffer, these Mirror Glaze products can be applied in a versatile manner, allowing you to remove defects and leave paint with a deep, high gloss, swirl-free shine

- EXCEPTIONAL RESULTS: Advanced technology formula provides a deep gloss and rich, swirl-free results, ensuring the luxury your vehicle deserves. This mirror glaze goes above and beyond to produce a high gloss finish with no defects left behind.
- NO MORE SWIRLS: Meguiar's M20508 Mirror Glaze Ultra Finishing Polish permanently and efficiently removes swirls and light defects from all paint in favor of a deep gloss. This powerful car polish gets the job done and leaves a lasting finish.
- STUNNING SHINE: Ultra Finishing Polish produces deep reflections and high gloss without leaving a mess behind. Treat your ride to a stunning shine with a professional polish that achieves an impeccable shine and gloss.
- EASY-TO-USE: Whether working by rotary, DA polisher, or hand, this professional polishing compound goes on and wipes off easily for a quick and easy cleanup. This Finishing Polish is the perfect way to enhance and refine paint and increase gloss.
- MULTIPLE WAYS TO APPLY: Formulated for use by hand, DA polisher, or rotary buffer. It's the perfect product to follow a more aggressive compound like Ultra Cut Compound M105 and before applying paint protection, like Pro Hybrid Ceramic Sealant M27.
- Can be applied to wet or dry paint
- Provides a deep, dark gloss and shine while adding protection
- Ease and convenience of a spray-on, wipe-off product saves on time
- Can be applied in full sun and won't whiten plastic trim
- Offers protection against the sun
Last update on 2025-04-18 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.