“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10150917
Manufacturer Communication Number: 05-66-18
Summary
This Service Information bulletin announces a running change to the four (4) front suspension crossmember retaining bolts to improve production efficiency. The new bolts have an increased length and are easily identifiable with their ?cone? shape on the threaded end.
2 Affected Products
Vehicle
SUBARU![]() | IMPREZA | 2018-2019 |
INTRODUCTION:
This Service Information bulletin announces a running change to the four (4) front suspension crossmember retaining bolts to improve production efficiency. The new bolts have an increased length and are easily identifiable with their “cone” shape on the threaded end.
PRODUCTION CHANGE INFORMATION:
The new crossmember bolts were incorporated into production during mid-June, 2018. This bulletin will be revised with the starting VIN when it becomes available.
PART INFORMATION:
The part number for the new bolt is 20008FL00A (qty. 4 per vehicle).
NOTES:
- Crossmember bolts are ONE-TIME USE items and must be replaced whenever loosened or removed.
- When replacing bolts with the new design, It is recommended to replace all 4 as a set.
COMPARISON PHOTOS:
SERVICE PROCEDURE / INFORMATION:
REMINDER: Customer satisfaction and retention starts with performing quality repairs.
These new crossmember bolts have a revised (HIGHER) torque specification of 110 Nm (81.1 ft. lbs.). Otherwise, the Service Procedure for their replacement remains unchanged. Always refer to the applicable Service Manual and review the full requirements of the repair being performed. The Service Manual procedures contain information critical to performing an effective repair the first time and every time. This includes but is not limited to: important SAFETY precautions, proper inspection criteria, necessary special tools, required processes and related one-time-use parts needed for a complete and lasting repair.
IMPORTANT: While the old design and new design bolts may be used in combination, due to the differences in torque requirements, when replacement is necessary, it is recommended to ensure all 4 bolts being used are the same type in order to eliminate having a mix of both with their different torque requirements during the installation process.
SEOCONTENT-START
APPLICABILITY: 2018-19MY Impreza
SUBJECT: Front Suspension Crossmember Bolt Change
IMPORTANT REMINDERS:
- SOA strongly discourages the printing and/or local storage of service information as previously released information and electronic publications may be updated at any time.
- Always check for any open recalls or campaigns anytime a vehicle is in for servicing.
- Always refer to STIS for the latest service information before performing any repairs.
SEOCONTENT-END
NUMBER: 05-66-18
DATE: 10/19/18
NUMBER: 05-66-18
DATE: 10/19/18
“This site contains affiliate links for which OEMDTC may be compensated” |
- Replacement for 2009-2013 Subaru
Forester Naturally Aspirated
- Kit Includes: 2x Front Strut + 2x Rear Strut + 2x Front Lower Control Arm + 4x Front and Rear Sway Bar + 2x Front Outer Tie Rod
- Detroit Axle Strut Shock Assemblies are complete and ready for installation with no additional work or special tool required for installation
- Undergo impact, wear, and fatigue testing to help ensure quality and durability
- 10-Year Warranty
- Part Numbers: 20250-FL001; 20250FL001
- Compatible with: Subaru
Crosstrek 2018-2023; Subaru
Forester 2019-2023; Subaru
WRX
2022
- Function: Provides stability and precise handling by connecting the suspension and wheels, maintaining proper wheel alignment
- When to Replace: Excessive play in suspension; visible damage (cracks/bends) uneven tire wear from misalignment
- TRQ products are covered by a 2 year / 24,000 mile warranty. Warranties cover the cost of products only and do not cover any damage, labor, or any other inconveniences incurred.
- Reference Number(s): 20250AE01A,20250AE030,20250AE031,20250AE03A,20250AE050,20250AE051,20250AE05A,20470AE00A,20470AE00B,2607841,270073913,4CB80255,524191,62247810,CMS801191,K80426,LA72565,LA72565PR,MK80426,RK643085,RK643567,RK643568,TC5152
- Quantity: 6 Piece
- Replacement for 2010, 2011, 2012, 2013, and 2014 Subaru
Legacy
- Kit Includes: (2) Front Complete Strut Assemblies
- Designed After OE Specifications for Exact Fit and Ride Quality
- Suspension Kit Replacement for 2009 2010 2011 2012 2013 Subaru
Forester Naturally Aspirated
- Kit Includes: 2x Front Struts + 2x Front Lower Control Arms + 2x Front Sway Bars + 2x Front Outer Tie Rods
- Detroit Axle Strut Shock Assemblies are complete and ready for installation with no additional work or special tool required for installation
- Undergo impact, wear, and fatigue testing to help ensure quality and durability
- 10-Year Warranty
- Direct Fit, OE Replacement Suspension Kit
- Kit Includes: (2) Front Lower Control Arms with Ball Joints; (2) Front Sway Bar Links; (2) Front Inner Tie Rods; (2) Front Outer Tie Rods
- Vehicle Specific: Check fitment information in the listing for compatibility
- OE Reference Number(s): 20202AJ04A,20202AJ05A,20420XA000,34141AC0109E
- Aftermarket Reference Number(s): 1015664,1028271,1028272,20202AJ04A,20202AJ05A,20420XA000,34141AC0109E,42799,45G20688,522831,522832,536036,5451688,CB72063,CB72063PR,CB72064,CB72064PR,CMS801114,CMS801115,ES3692,ES3712,EV800049,K750084,MES3712,MS801114,MS801115,MS80705,MS80814,MS80825,PSA50220,PSA64955,PSA64956,PSA64957,PSA66805,PSA66828,PSA66908,PSA81010,RK623343,RK623344,SUS04459,SUS06115,SUS06116,SUS07117,SUS07625,SUS07913,TC2917
- Suspension Kit Fitment - Position: Front (Driver and Passenger Side); Compatible with 2014 2015 2016 2017 2018 Su-baru Forester (S13 Body Code)
- Suspension Kit Include - 2 x Front Lower Control Arm - ( K622856 + K622857 ) + 2 x Front Lower Ball Joints - ( K9513 ) + 2 x Front Stabilizer Sway Bar End Links - ( K750084 ) + 2 x Front Outer Tie Rod End Links - ( ES3712 ) + 2 x Front Inner Tie Rod End Links - ( EV800982 ) + 2 x Front Steering Rack and Pinion Bellow Boots
- Premium Quality - Made following stringent OE specifications by an OE manufacturer.Each control arm /Ball Joint /Tie Rod End /Sway Bar Link undergo strict quality control not just before shipping but throughout the production process.During each step of production multiple quality control checks are performed to ensure a long,Trouble-free service life
- Please Note - Before placing the order, please check your car model in the Amazon Fitment Filter System in the top left corner,Do not count on year make and model only,please view compatability tab including the notes,or send us a message to make sure it matches exactly
- OEM Part Numbers - RK622857 RK622856 RK750084 102-8055 102-8056 101-5664 101-8181 101-4585 101-4105 GS801212 527-087 GS801212 527-088 GS80825 536-036 MS80730 543-653 MES3712 544-402 GK9513 539-031 B9513 20202SG010 20202SG011 20202SG000 20202SG001 20420-XA000 45G20688 34160FL00A 34160SC020 34141AA041 34141AA042 20206AJ000 21067GA050
- Compatible Auto List: Replacement for Subaru
Forester 2009 2010 2011 2012 2013 ,for Subaru
Impreza WRX
2011 2012 2013 2014 ,for WRX
Limited; WRX
Premium
- Kit Includes: 2 Front Lower Control Arm + 2 Front Sway Bar(OE/OEM Part Number:1*RK622787 1*RK622789 2*K750049)
- Premium Quality: KAX control arm is made of high-quality material and maintains excellent strength for long-term performance. It can be installed easily without using complicated tools
- Easy to Install : Plug and play design, no modification or drilling, quick installation. Shock, abrasion and fatigue tested to help ensure quality and durability.
- Long-Lasting: Our suspension kit features pre-oiled ball joints and protective electrocoat to reduce the effects of rust and corrosion and reduce wear. The high-quality steel body and rubber bushings dampen the vehicle's vibrations and reduce noise, making it strong enough to last longer
- [Compatible With]: This Rear Suspension Trailing Control Arm is compatible with Subaru
Crosstrek 2018-2023 / Forester 2019-2023 / WRX
2022.
- [Replace Part Number]: 20250-FL001,20250FL001.We are committed to providing customers with a perfect product experience. In order to ensure that our products fully meet your needs, please carefully check your rear suspension trailing control arm part number before purchasing.
- [High Quality]: Our products are made of high-quality raw materials through professional production technology, so that the products have excellent performance and long service life.
- [Warranty & Service]: We will provide you with a one-year product return service.If you have any questions during purchase and use, please feel free to contact us. It is our honor to serve you.
- [Package Include]: The package contains 1 x Rear Suspension Trailing Control Arm.(As shown in picture.)
- Suspension Kit Fitment: 2000 2001 2002 2003 2004 For Subaru
Legacy; 2000 2001 2002 003 2004 For Subaru
Outback
- Suspension Kit Include: (2) Es3712 Front Outer Tie Rod End; (2) Ev473 Front Inner Tie Rod End; (2) K80426 Rear Sway Bar End Link; (2) K80693 Front Sway Bar End Link; (2) K9513 Front Lower Ball Joint
- When To Replace Suspension Kit: ①Steering noise sounds when turning; ②Feeling every bump; ③Difficulty when steering
- Suspension Kit Buyer's Guide: A complete suspension kit typically includes control arms, idler arm, pitman arm, tie rod ends, sway bar links and ball joints. All of our suspension parts have been pregreased before delivery, will require no more additional work
- Note: SCITOO Auto provide suspension kits for most cars, suvs, trucks and trailers. Please carefully select your vehicle (Year/Make/Model/Trim) in the top left corner of the page to confirm compatibility, or refer to the vehicles information in description
Last update on 2025-05-08 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.