NHTSA ID Number: 10171918
Manufacturer Communication Number: 11-198-20
This bulletin announces availability of reprogramming files to optimize the engine’s electronic control module (ECM). These new files address concerns of the check engine light coming on and setting any of the following DTCs for Air-Fuel Ratio Imbalance: P219C, P219D, P219E or P219F. The ECM parameters for air-fuel (A/F) calculation have been revised.
2 Affected Products
|APPLICABILITY:||2019-20MY Crosstrek Hybrid (PHEV)|
|SUBJECT:||DTCs P219C, D, E or F- ECM Reprogramming File Availability|
This bulletin announces availability of reprogramming files to optimize the engine’s electronic control module (ECM). These new files address concerns of the check engine light coming on and setting any of the following DTCs for Air-Fuel Ratio Imbalance: P219C, P219D, P219E or P219F.
The ECM parameters for air-fuel (A/F) calculation have been revised.
PACK FILE APPLICABILITY:
|Model||PAK File Name||New ECM Part Number||Old ECM Part Numbers||Decryption Keyword||New ECM CID Number|
|2019MY Crosstrek Hybrid||22765AM403.pak||22765AM403||22765AM400, 401 & 402||9157D3F3||XHVK401A|
|2020MY Crosstrek Hybrid||22765AN781.pak||22765AN781||22765AN780||561DE407||XHVN102A00G|
REMINDER: Customer satisfaction and retention starts with performing quality repairs.
- Reprogram the ECM following the normal FlashWrite procedure.
SERVICE PROCEDURE / INFORMATION:
Subaru of America, Inc. (SOA) highly recommends connecting either the Subaru Midtronics DCA8000 Dynamic Diagnostic Charging System or the Subaru Midtronics GR8-1100 Diagnostic Battery Charger to the vehicle and utilizing the Power Supply Mode feature anytime a vehicle control module is being reprogrammed.
Once the Midtronics charger is connected to the vehicle, if the battery is fully charged, it takes less than three (3) minutes to boot-up the charger, select the Power Supply Mode, and have the battery voltage stabilized and ready for reprogramming.
- For instructions on using the power supply mode, reference the applicable User Manual for the Midtronics DCA-8000 Dynamic Diagnostic Charging System and the Midtronics GR81100 Diagnostic Battery Charger on STIS.
- Confirm all electrical loads such as lights, audio, HVAC, seat heaters, and rear defroster are all switched OFF before setting up the charger for Power Supply Mode.
- Select the correct battery type (Flooded, EFB, Gel, AGM or AGM Spiral).
- Input the CCA which matches the vehicle’s battery. NOTE: OE and replacement batteries have different CCA ratings. Always confirm the battery’s CCA rating before proceeding.
- If using a DCA-8000 Dynamic Diagnostic Charging System, set the power supply voltage to 13.5 volts.
- DO NOT connect the DST-i or SDI until the Power Supply mode function has completed its battery test mode and the Charging Voltage has dropped to and shows a steady 13.5 Volts on the display.
- Once Power Supply Mode reaches a steady 13.5 volts, connect the DST-i or SDI to the OBD connector and proceed with initiating the normal FlashWrite reprogramming process.
- Amperage will fluctuate based upon the vehicle’s demand for power. NOTE: If the voltage rises beyond 14V while programming is in process, the procedure will abort. This can indicate a need to test or charge the vehicle battery before any further attempt at programming is made.
This information is applicable to the Subaru Midtronics DCA-8000 Dynamic Diagnostic Charging System and the Subaru Midtronics GR8-1100 Diagnostic Battery Charger ONLY. It does not apply to any other brand / type of “generic” battery charger whatsoever. ONLY the DCA-8000 and the GR8-1100 and their Power Supply Mode feature have been tested and approved by SOA.
NOTE: Control module failures resulting from battery discharge during reprogramming are not a matter for warranty. Should any DTCs reset after the reprogramming update is performed, diagnose per the procedure outlined in the applicable Service Manual.
WARRANTY / CLAIM INFORMATION:
For vehicles within the Basic New Car Limited, an applicable Emission Warranty period or covered by an active Subaru Added Security Classic or Gold plan, this repair may be submitted using the following claim information:
|Labor Description||Labor Operation #||Fail Code||Labor Time|
|MFI OBDII ECM Reprogramming||A455-288||UPG-48||0.4|
IMPORTANT: Always note the original Calibration Identification number (CID) the vehicle came in with on the repair order before reprogramming and, make sure to list the NEW CID for any newly installed programming (as confirmed from the actual control module AFTER installation). The NEW CID MUST also be noted on the repair order as this information is required for entry in the Miscellaneous Detail field during claim submission.
NOTE: The pak file listings provided in this bulletin are the latest available at the time of publishing. Updates are often released thereafter without revision to the original bulletin. For this reason, it is critical to always have the latest version of Select Monitor software installed on your system. You can confirm if a later version is available by entering the CID listed in this bulletin into FlashWrite.
If a newer CID is shown as available in FlashWrite, reprogram using that file.
- SOA strongly discourages the printing and/or local storage of service information as previously released information and electronic publications may be updated at any time.
- Always check for any open recalls or campaigns anytime a vehicle is in for servicing.
- Always refer to STIS for the latest service information before performing any repairs.
What J2534 reprogramming capabilities are available?
(4a) J2534 Reprogramming
Subaru reprogramming files using a generic (non-OEM) SAEJ2534 pass-thru vehicle programming device are available by contacting Service Technical Information Company toll free at 1-866-428-2278. The cost for the CD-ROM with all reprogramming files is $75.00 plus S/H and applicable state tax. Files will be updated four (4) times per year, in CD-ROM format, with all available reprogramming service information at the same above offered cost. Authorized Subaru Dealers are provided the same reprogramming information.
Before purchasing, the reprogramming details can be found in the following Reprogramming J-2534 Files chart. Click the link to view the PDF chart.
Subaru J2534 Reprogramming software meets the latest available J2534-1 specification. Our Reprogramming J2534 Files chart does not specify the Calibration Identification Number (CID); however, this information is included in our offered CD-Rom.
Note: The ECM or TCM being reprogrammed may already contain some or all of the reprogramming files listed in the Reprogramming J2534 Files chart shown by release date. It is possible to damage the vehicles ECM/TCMduring the reprogramming event. Once the reprogramming process has started, it is recommended not to interrupt the process until the event is completed. If you experience any problems, please contact your scan tool maker for further instructions.
No. Subaru has no reprogramming capability for model years 1996-1998. Starting with our 1999 model year, please see our Reprogramming Pre-J2534 Files chart for affected model reprogramming information.
- 16Pin MINI VCI OBD2 USB Interface Scan Cable for Toyota - MINI VCI for TIS Techstream supports TIS OEM diagnostic soft ware and all the diagnostic communication protocols needed for Toyota since 1996, for diagnose, customer setting, programming (new key), reprogramming (ECM/ECU), coding etc.
- MINI VCI Cable Diagnostic Test Scanner Function - MINI VCI check engine light shut off, multi-language interface, freeze frame displays, internet updateable, user friendly and others function, heavy duty thick-shielded cable for best test results.
- 16Pin OBD2 MINI VCI Diagnostic USB Cable Supported Protocols - K-Line ISO 9141, KWP 2000 ISO 14230-4, SAE J1850 PWM, SAE J1850 VPW, CAN 2.0B ISO 11898, CAN ISO 15765-4. Firmware version is 1.4.1, Techstream version V14.30.023
- Mini VCI diagnostic cable compatible with (32bit/64bit) Win XP/ Win7/ Win 10, recommended Operating System is Win7, and the installation need uninstall the virus protector. Firewall and defender need to be closed in case it damages the software.
- What You Will Get - We offer mini VCI cable 24 month service, any questions about OBDII cable converter adaptor, or if you need Techstream_Setup_V15.00.026 version, pls contact us, the Techstream software will be sent to you by Email, we will reply you within 12 hours. You will get a MINI VCI cable scan tool, with CD inside the package, include 1. Mini VCI Driver for TOYOTA _1.4.1. 2. Techstream_Setup_V14.30.023. 3. Techstream Patch 32bit. 4. Techstream Patch 64bit 5. Install Video
- 【ECU PROGRAMMING & ECU CODING】: Autel diagnostic scanner MS908S Pro comes with J2534 ECU programming device & BMW Ethernet Cable(For F-Series Coding & Programming), which is capable of replacing the existing software/firmware in the Electronic Control Units (ECU), programming new Benz/BMW ECUs and fixing software-controlled drivability issues and emission issues, update the computer software on the vehicle to the latest version.
- 【ADVANCED SPECIAL SERVICE & All SYSTEM DIAGNOSTIC】: Full system diagnostic scanner MS908P covers over 25+ professional service functions like ABS brake bleeding, IMMO (Anti-theft matching) to finish keys programming(Specific Vehicles), Oil Reset, EPB, BMS, SAS, DPF, TPMS sensor activate, etc. NOTE: All the service functions are NOT universally compatible! Please send your Vehicles information( Makes, Year, VIN number) to [email protected] to check compatibility.
- 【Same as Maxisys Elite/MK908P, Updated of Maxisys Pro】: One of the MaxiSys series devices, the MS908S Pro Diagnostic Platform bases on the revolutionary Android multitasking operating system, utilizes the powerful Cortex A7+A15 six-core processor, and equips with 9.7-inch LED capacitive touch screen, supporting J2534 ECU Programming Device offering comprehensive OE-level diagnostics, ECU coding and BMW/Benz ECU programming.
- 【FULL BI-DIRECTIONAL CONTROL】: The diagnostic scan tool supports bi-direction control to check the vehicle operating conditions. The bi-directional control of the ECM in the Component Test enables the Ms908s Pro to transmit control commands to operate the vehicle systems.
- 【12-MONTH WARRANTY & FREE SOFTWARE ONLINE UPDATE】: Feel free to get technical support via email☛[email protected] MS908S Pro is equipped with the best hardware, combined with the best possible coverage of OE-level diagnostics, practical functions like ECU coding, auto VIN scan, complete OBD2 functions like read and erase codes, live data, freeze-frame, I/M readiness status, O2 Monitor Test, component test and data printing. BT pairing between the diagnostic table and J2534 is OVER 210 feet.
- 【ADVANCED ECU PROGRAMMING】 This pro-level scan tool features Autel’s Powerful Complete Diagnostic System with easy-to-go workflow of ECU Coding: / for customer individual customization of the car (to improve vehicle performance, or stimulate high-end car functions); / for the configuration alteration (when a component is replaced); / and for multiple car systems’ recognition of each other etc. , with optimal efficiency.
- 【36+ SERVICE FUNCTIONS】This OE-Level diagnostic scanner offers more than 36 service functions as Oil Reset, Injector Coding, EPB, TPMS, BMS, Brake Bleed, DPF, Immo Keys, SAS, Suspension, Throttle etc. It also gains full access of all available vehicle modules to Retrieve ECU information, Read & Erase DTCs, and View Live Data of each parameter item, with Bi-Directional Control (Active Test) to check the operating conditions of various car systems and components.
- 【J2534 PROGRAMMING】Autel MaxiSys Elite features J2534 ECU Programming for BMW & Benz, to access, update, replace and program the existing software/firmware in ECUs, without the need of a dealer-only tool, to troubleshoot and deal with complex vehicle problems like Driveability, Fuel Efficiency, Power Loss, Fault Codes, and Durability of mechanical parts etc. , with easy step-by-step instructions. This ultimate Autel scanner is made for perfection.
- 【DISCOVER OUR 24/7】2 years FREE software update + 1 year . This diagnostic tool is backed by Autel’s professional tech team and service team, to offer the top quality product and service in the industry. Autel MaxiSys Elite comes a way in easing up and increasing efficiency in your professional diagnostics from all the features mentioned above. The returns are a . *The tool is only available to sell in the U. S. Region.
- 【STATE-OF-THE-ART HARDWARE】This Android 4. 4. 4 KitKat OS-based, tablet-style diagnostic scanner incorporates the world’s fastest mobile processor NVIDIA’s Tegra 4, with internal 2GB RAM (32GB SSD), for boosted performance (boot-up time < 20 sec). Also, Elite comes with a visually stunning sharp Retina display of 9. 7”, with an 8. 0-megapixel rear camera with flashlight and auto focus. This scan tool is bound to work as fast and effective as possible.
- 🚗【TOP KEY PROGRAMMING + IMMO Function Tool】The most advanced and smart key programming tool that combines the most powerful IMMO and programming functions with OE-level diagnostics and advanced service functions in one Android based 10.1-inch touchscreen tablet, it helps perform complete key programming quickly. Please send VIN number to▲[email protected]▲ to check compatibility before purchasing.
- 🚗【ECU PROGRAMMING TOOLS + POWERFUL OE LEVEL】Powerful OE level diagnostics for more than 80 US, Asian and European makes and models. XP400 is to read transponder data (especially Benz infrared smart key), clone and generate exclusive keys, read/write on-board EEPROM data, etc. IMMO application provides Smart Mode and Expert Mode to guide technicians performing IMMO related functions, including Key Learning, Remote Control Learning, Remote Control Add, etc
- 🚗【ADVANCED IMMO + J2534 VCI】Guide technicians performing IMMO related functions, including Key Learning, Remote Control Learning, Remote Control Add, etc. The Wireless Diagnostic Interface supports two communication methods with the tablet: BT and USB. The working range for BT communication is about 210feet (70 m)You can perform key programming and vehicle diagnosis on various vehicles conveniently, by pairing the tablet separately to each of the MaxiFlashc.
- 🚗【ACTIVE TEST + ECU CODING + 23 RESET SERVICE】Bi-directional control of the ECM is useful in determining whetherthe ECM responds to a command well. And Auto VIN Identification, ECU Coding are available for IM608. Most useful service including: Oil Reset Service/ EPB Service/ BMS Service/ SAS Service/ DPF Service etc.
- 🚗【(US ONLY) 1 YEAR FREE UPDATE + 1 YEAR WARRANTY + PERMANENT After-Sales SERVICE】1 YEAR Free Software Updating is available. If you have any issue after you get the item, please CONTACT>>▲[email protected]▲, you can get a quick response.▲IM608 just can be used in US. Please don't switch the IP or the device will be locked! Don't take IM608 to other countries▲
- 🎉【Powerful ECU Programming + Coding】: Autel MK908P, designed as an OE-level OBD scanner, serves as the most advanced automotive diagnostic tool. It supports ECU programming and coding for Benz and BMW car models with J2534 and diagnostic software on the tablet. For the detailed car chassis coverage, please contact our support at [email protected] for more detail.
- 🎉【Online Functions + Active Test】: There is online coding for VW, Audi, Porsche, Benz, BMW. Online configuration for Renault is unique among diagnostic industries. Besides, MK908P features Bi-Directional Control (Active Test) to request information or command a actuator to perform specific tests, like cycling the a/c clutch on and off, perform an evaporative emissions leak test and more tests to solve the specific repairing work.
- 🎉【All-system Diagnose + 30 Service Functions】: Provided with full-systems diagnosis(ABS, SRS, Engine, Transmission, Brake System, Emission System, Fuel system, Light system, Wiper System, etc.), MK908P also offers another 30+ service functions to help your repairing work faster, easier, and more professional. These service functions include immo keys/throttle/injecor coding/trans adaption/suspension/tyre retrofit/DPF/brake bleed/oil reset and more.
- 🎉【Common + Luxury Car Makes Coverage】MK908P is designed for repairing store, thus it enjoys extensive coverage for almost all car makes. Firstly, it has a wide range of compatibility for over 80 brands in the US, Europe and Asia. Besides, you have access to the newest model with fast-release software update. Moreover, There are basic diagnostic functions and most service / special functions compatible with Lamborghini, Ferrari, Aston Martin and Maserati etc.
- 🎉【Advanced Hardware + Reliable Service】As the advanced version of MS908P,MS908S,MS908E, MS908PS PRO, MK908P runs much faster with android 4.4 OS, hexa-core processor, KitKat operating system, 2GB RAM & 64GB on-board memory, 10.1 inches LED screen ,20+ adapters and cables. 1-year free update, 12-month warranty, 30-day free return fees, 24-hour after-sales service are offered and promised.
- 【Advanced IMMO & Key Programming】Autel IM608 is a perfect choice for auto technicians and locksmiths to encrypt keys, add keys, change keys, and generate keys. The Smart Mode and Expert Mode in IMMO app offer you guided and advanced Key Learning to choose. The Autel scanner can also read/write various key chips helping perform complete key programming quickly. 🔥Note: IM608 just can be used in the US. Don’t take it to other countries or change the IP.
- 【ECU Coding & Active Test】Active Test helps you accurately figure out whether a specific subsystem or component in vehicles goes well. This function may appear as Actuators, Actuator Test, or Function Tests, and the tests options vary by vehicle manufacturer and model. After repairs or replacements of vehicle parts, Autel IM608 can reprogram adaptive data for certain components of the test vehicle through ECU Coding.
- 【Reliable Key & ECU Programming Tools】 Equipped with XP400 key programmer and MaxiFlash ECU reprogrammer, this Autel scanner performs IMMO Add Key, Keys Lost and Key Learning for 3rd generation Benz. Besides convenient PC communication and ECU reprogramming capabilities from the MaxiFlash tool, it can read transponder data (including Mercedes Benz infrared smart key), clone/generate exclusive keys, etc. by working with the XP400 key programmer.
- 【Language & Wide Compatibility】When you get this Autel scanner, it only supports English. 🔥You can get the required language by providing the serial number for customer service via ▶[email protected]◀. Compatible with more than 80 makes and models from the US, Asian and European, the Autel IM608 can perform OE-Level all-system diagnostics for Chrysler, Dodge, Ford, GM, Jeep, etc.
- 【12-Month Free Update & Warranty】Autel IM608 comes with a 1-year free update online to improve the apps’ capabilities by adding critical patches, new models, etc. When the 1-year update expires, it will cost $1250 per year to continue updating. A 12-month warranty gives you a guarantee for any possible quality problems. For any question, feel free to ask the customer service.
- 【SUPERIOR CODING & PROGRAMMING】 Supports coding and programming especially for BMW and Mercedes. With the VCI of MK908P for SAE J2534-1 and J2534-2 protocols, it can replace the existing software and firmware in ECU without expensive original equipment.
- 【WIDE DIAGNOSTIC SOLUTIONS】 Well capable of VCM coding and programming, TPMS coding, intelligent cruise control (ICC), ECU coding, live data, dashboard matching, airbag system reset, anti-theft key matching and more.
- 【POWERFUL DIAGNOSTIC TOOL】 The oscilloscope MP408 combine with MaxiCOM MK908P is able to measure and test virtually all the electrical and electronic components and circuits in any modern vehicles, providing you an insight to the inner workings of a vehicle’s electronic circuits.
- 【HIGH-EFFICIENCY OF USE】 Being MS908P upgraded, it is Autel’s latest and most sophisticated diagnostic scanner which boasts the best hardware including Hexa-CPU, 2GB RAM etc. for fast boot-up and multitasking, and the ergonomic design to resist damage of heavy use.
- 【WARRANTY & UPDATE】 You can get quality related services within 12 months warranty, besides, 12 months free online update is available for the latest bug fixes and newly added parameters and car models.
- ECU PROGRAMMING: The diagnostic tool comes with a J2534 ECU programming device that helps Benz and BMW users replace the existing software/firmware in the ECU, program new ECUs and fix software-controlled driving performance and emission issues.
- VEHICLE COVERAGE: The software of MK908P has a wide range of compatibility and can be used to diagnose vehicles from over 80 brands in the US, Europe and Asia. Moreover, you can get more newly added car models with the fast-release software update service.
- ADVANCED HARDWARE: MK908P, as the advanced version of MS908P, features the 10. 1” 1920*1200 screen upgraded from 9. 7” 1024*768, and the battery capacity is 15000mAh increased by 4000 mA. Also, it has a better anti-impact protection design.
- BI-DIRECTIONAL CONTROL: The diagnostic tool supports bi-direction control to check the vehicle operating conditions. The bi-directional control of the ECM in Component Test enables the MK908P to transmit control commands to operate the vehicle systems.
- ADDITIONAL SERVICE: The MK908P is designed to serve users with a rich array of easy-to-use functions and features. The Maxi Fix provides you with an online troubleshooter database, and Remote Desk allows you to get help from others via TeamViewer software.
- --high speed host communication.(3 mbps)
- --stable host communication.(with rts/cts flow control)
- --automatically register software and no virtual machine needed.
- --online software update and keep software latest always.
- --online fireware update.
- VCX is designed on the basis of the latest automotive international standards so that it can support many professional automotive diagnostic applications
- VXDIAG VCX Nano support latest version software, Compatible with varieties protocols. can be very easy to connect various automotive bus to a PC
- OS support both WINDOWS XP and Windows 7, Software support multi-languages: Chinese, English, French, Italian, Spanish, German, ec
- Small size, easy to carry and convenient for us
- We provide full time online support, if you have any questions about our device, please feel free to contact us online via ask us a question or send us email
Last update on 2020-08-08 / Affiliate links / Images from Amazon Product Advertising API
Last update on 2020-08-08 / Affiliate links / Images from Amazon Product Advertising API