“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10171950
Manufacturer Communication Number: 07-169-20
Summary
This Service Information bulletin describes a change made to the labels applied to the push to start switches used on the models listed.
31 Affected Products
Vehicles
SUBARU![]() | ASCENT | 2019 |
SUBARU![]() | BRZ | 2016-2020 |
SUBARU![]() | CROSSTREK | 2013-2020 |
SUBARU![]() | IMPREZA | 2012-2020 |
SUBARU![]() | LEGACY | 2013 |
SUBARU![]() | OUTBACK | 2013 |
SUBARU![]() | WRX![]() | 2015-2020 |
NUMBER: 07-169-20
DATE: 02/21/20
APPLICABILITY: | 2013MY Legacy and Outback 2014-20MY Forester 2012-20MY Impreza 2013-20MY Crosstrek 2015-20MY WRX ![]() 2016-20MY BRZ 2019MY Ascent |
SUBJECT: | Push Button Start Switch- Label Change |
INTRODUCTION:
This Service Information bulletin describes a change made to the labels applied to the push to start switches used on the models listed above. There has been NO change made to the operation or functionality of the switches. The label change was made for compliance reasons in the Indonesia, Argentina and China markets.
PART INFORMATION:
The part number switches listed below include the new labels. Any changes identified between the OLD and NEW part labels can be disregarded.
REMINDER: Always order the most up-to-date replacement parts based on the specific VIN being repaired.
83031FL001 | 83031FJ005 |
83031FL00B | 83031VA001 |
83031VA011 | 83031FJ011 |
83031CA005 | 83031CA024 |
SERVICE PROCEDURE / INFORMATION:
REMINDER: Customer satisfaction and retention starts with performing quality repairs.
Service procedures for switch replacement remain unchanged. Always refer to the applicable Service Manual and review the full requirements of the repair being performed. The Service Manual procedures contain information critical to performing an effective repair the first time and every time. This includes but is not limited to important SAFETY precautions, proper inspection criteria, necessary special tools, required processes and related one-time-use parts needed for a complete and lasting repair.
IMPORTANT REMINDERS:
- SOA strongly discourages the printing and/or local storage of service information as previously released information and electronic publications may be updated at any time.
- Always check for any open recalls or campaigns anytime a vehicle is in for servicing.
- Always refer to STIS for the latest service information before performing any repairs.
NUMBER: 07-169-20
DATE: 02/21/20
“This site contains affiliate links for which OEMDTC may be compensated” |
- 【Fitment Vehicle】: Auto start stop eliminator compatible with Subaru
Forester 2018 2019 2020 2021 2022 (Note:Hybrid version is not suitable), compatible with Subaru
Legacy 2017 2018 2019 2020, compatible with Subaru
Outback 2015 2016 2017 2018 2019 2020, compatible with Subaru
XV 2018 2019 2020 2021 2022.
- 【Function】:After installing the auto start stop a-off controller, the automatic start stop function of the original car is disabled by default to protect the engine and extend the spark plug service life.You don't need to turn off the start stop function manually every time when you get on the car.
- 【Easy Installation】:Remove the fuse cover,locate the plug corresponding to the automatic start stop button and remove it.You can use a small screwdriver to loosen the button,remove the original automatic start stop button,replace it with our auto stop start eliminator button,then reinstall the plug, no need to insert the fuse,really easy to install.
- 【Features】: auto start stop a-off delete/disable/eliminator/canceller protects the engine and effectively prevents losses caused by frequent engine starts, protects the store and effectively prevents losses caused by frequent starts to the battery and extends life, and reduces fuel consumption and vehicle usage cost. Led glow in dark design,help you to find the button easily to avoid driving distraction.
- 【NOTICE】:Please confirm whether your model part number of car matches the part number on our list before purchasing. You can also refer to our model compatibility table for purchase.
- Fits models:EH092D50001,EH092D50010,EH092D50011,EH092D47060,EH092D50000,EH092D00051
- Fits models:EH092D40011,EH092D40020,EH092D47000,EH092D47020,EH092D47030,EH092D47040
- Fits models:EH092D00020,EH092D00021,EH092D00030,EH092D00040,EH092D00041,EH092D00050
- Fits models:EH092D00060,EH092D00070,EH092D10000,EH092D10001,EH092D10010,EH092D20030
- Fits Robin Subar : EY15, EY20 (5HP), EX13 EX17 EX21 EX27 EX30 EX35 EX40 EH36 EH41 Engine Series
- Compatibility: Designed specifically for 2019 2020 2021 2022 2023 2024 forester and 2018 2019 2020 2021 2022 2023 Crosstrek and 2015 2016 2017 2018 2019 2020 Legacy/Outback;, ensuring a perfect fit and seamless integration with the vehicle's electrical system.
- After installation, turn on the car and the auto-off button will automatically turn on. The default setting is that you don't have to manually turn off the stop engine function every time. If you want to use A-OFF function, just press button again to reactivate it..
- Improved Fuel Efficiency: By disabling the start/stop system, it can potentially improve fuel efficiency by reducing the frequent engine restarts.
- Simple Installation: Easy to install, Plug this device between the A-OFF button and your vehicle, and then pull out the fuses box cover, plug the extra cable with an empty fuse port(Attention: PLS CONNECT WITH AN EMPTY FUSE PORT SO THAT IT CAN WORK WITHOUT PROBLEM)
- Package includes install tool x1pc, stop start eliminator x 1pc; No module and energy storage device inside, no error code after install.
- 【Perfect Fit】 The Auto Start Stop Eliminator is designed specifically for Subaru
Forester 2019-2024 ; Subaru
Legacy 2017-2020 ; Subaru
Outback 2015-2020 ; Subaru
XV 2018-2022
- 【Superior Performance】 Our Auto Start Stop Eliminator keeps the engine running while you're parked, providing you with smoother starts and driving experiences, reducing startup delays and discomfort. Additionally, disabling the auto start-stop function helps reduce the wear and tear caused by engine startups and extends the engine's lifespan.
- 【Easy Installation】Remove the fuse cover and locate the plug corresponding to the auto start-stop button. Disconnect the plug, remove the original auto start-stop button, replace it with our new auto start-stop eliminator button, reinstall the plug.
- 【Buy with Confidence】 We offer a one-year unlimited-mileage quality service on our meticulously crafted product, ensuring that you can hit the road with peace of mind and no worries.
- 【Please Note】 Please refer to the installation picture for specific installation steps in our listing. For the first installation, wait 15 seconds and do not press any keys.
- Works and compatible with Subaru
Forester 5th Gen (SK) 2019 2020 2021 2022 2023, plug and play, no error code after install, won't effect any other function
- Why should install this Eliminator device? Because "Auto start stop" will cause the air conditioner not run smoothly and it will accelerate the aging of the spark plug, frequent start and stop will seriously shortening the battery's service life
- Function: after installation,restart your car,the A-OFF button will automatically turn on,you don't have to manually turn on the stop engine function every time,if you want the auto-off function work again,just press the A-OFF button to reactivate it
- Installation: this cable is installed in-between the Auto Start Stop switch and the vehicle wiring harness to disable the auto start stop function, just remove the central control panel of A-OFF button and connect the two ends with this cable
- Important note: does not work with the car without "A OFF" button which means the car doesn’t have the automatic start-stop system,and the video is only a reference for installation thinking (you could find the disassembly method on Google / YouTube)
- ✔Applicable Models - Compatible with Subaru
Forester Legacy Impreza Outback Ascent BRZ XV original car data, please confirm that this product is suitable for your car before purchasing.
- ✔Preferred Materials - Made of high-quality aluminum alloy materials, wear-resistant, scratch-proof, dust-proof, and upgraded protection, not only protection but also beautiful, and enjoy the exquisite decoration in the car.
- ✔1:1 Design - This product is customized for your car, and can be highly consistent with your car interior. The increase in color makes the interior more beautiful, and also greatly improves the quality of the car.
- ✔Easy to install - The cover is very easy to install, no other tools are needed, and there is adhesive on the back, so installation is simple and quick. And will not damage the original accessories or affect the use of buttons.
- ✔Package Includes - The package includes 1pcs engine start stop button cover, which can meet your needs for your car. If you have any questions about the product, you can contact us by email, and we will do our best to solve the problem for you.
- Compatible with Vehicle Models:The upgraded auto start stop eliminator is compatible with Subaru
Forester 2019-2022 (Note: Hybrid version is not compatible), For Subaru
Legacy 2017-2020, For Subaru
Outback 2015-2020, and For Subaru
XV 2018-2022
- Function:Frequent engine shutdowns and restarts can be detrimental. After installation of the auto start stop eliminator, the car will automatically activate the auto-off button.The default setting of the original car's automatic start-stop function is disabled to safeguard the engine
- Advantages:This auto start/stop off delete/disable/eliminator/canceller device effectively addresses issues such as automatic traffic light shut-offs, energy conservation, emission reduction, fuel cost reduction, and improved comfort
- Easy to Install:Remove the fuse cover and push out the middle side clamp. Remove the wire plug from the button, install the new automatic start stop device, and reconnect the wire plug to complete. Please wait for 15 seconds for the first installation, do not press any keys
- LED Night Light Design:Upgraded button type, equipped with LED light, plug-to-plug, simple and nondestructive installation.The button pops up, the function is on; The button pops down, and the function is off
- PREMIUM QUALITY MATERIAL: The reliable push button starter switch cover is made of carbon fiber at high quality with UV-resistant epoxy coating, which features a good resistance to corrosion and abrasion. Non-toxic, odorless, lightweight, rustproof and fadeless.
- OPTIMAL PERFORMANCE: The push to start cover provides a fashion and luxurious decor style for your car, and it can hide existing scratches and prevent your push button start from dust, fingernails, key scratches, etc.
- EASY INSTALLATION: The start stop button cover can be installed directly and simply with its self-adhesive tape, no drilling or cutting required, no need of other installation tools, just place the button cover on the push start ignition switch. No damage to your car and original accessories.
- PERFECTLY FIT : It is in line with the buttons of the original model and perfectly fits the model.
- GUARANTEE: For any reason you are unsatisfied with our start stop engine button cover, we will provide you a best solution, and we will refund your money in full if you still have concerns.(Please measure whether our products fit your car before you buy)
- Direct fit replacement unit Push Button Starter Switch
- Push start button apply to most 12 volt vehicles with 20A current
- Weatherproof rubber cover and 2 copper terminals. Dimension: 2-1/2" end to end, 5/8" Hole
- A push-to-make switch returns to its normally open (off) position when you release the button, this is shown by the brackets around ON. This is the standard Horn / Ignition type switch
- 100% quality test before shipment, and we strongly stand by our Carbole products
- Fit for Subaru
Crosstrek 2016-2017, XV Crosstrek 2013-2015, Impreza 2012-2016.
Last update on 2025-05-08 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.