“This site contains affiliate links for which OEMDTC may be compensated” |
Accessory Installation Guide
2021 Crosstrek Moonroof Air Deflector | F541SFL000 |
SEOCONTENT-STARTPART NUMBER ISSUE DATE SUBARU PAGE 01 01/13/2020 1/3
INSTALLATION
INSTRUCTIONS
PART NUMBER:
DESCRIPTION: MOONROOF AIR DEFLECTOR
Phillips head screwdriver
Tools Required
SGD32
A B C D
E F G
1x 2x 2x
1x 2x 2x
F541SFL000
• DO NOT USE SOLVENT BASED CLEANERS ON MOONROOF AIR DEFLECTOR.
• DO NOT USE LOCTITE ON DEFLECTOR ATTACHING SCREWS.
• USE SOAP AND WATER ONLY TO CLEAN MOONROOF AIR DEFLECTOR.
IMPORTANT NOTES
F541SFL000
The moonroof air deflector is designed to reduce wind noise when the moonroof is in the opened position.
However, in some cases wind noise may be slightly louder with the moonroof in the tilt or closed position.
VEHICLE DESCRIPTION: SUBARU CROSSTREK
T
:Install
:Disconnect
:Connect
:Location of Clips or Screws
:Remove
:Loosen
:Discard
:Re – use
:Tightening Torque
Meaning of Characters:
10
NO POWER TOOLS
2x
SGD32
1.
PART NUMBER ISSUE DATE SUBARU PAGE F541SFL000 01 01/13/2020 2/3
5.
Secure the clips (C) onto the Deflector (A) with the screws (B)
and washers (G) provided. Sequence is: screw (B), washer (F),
Blade(A) and clip (C).
Read all steps before commencing & check parts list carefully.
Peel backing off foam pad (G) and attach to metal clips (C).
C
G
A
3.
2.
4.
6.
7. 8.
9. 10.
Remove masking tape.
C
BF
ITEM COMPONENT NAME QTY
1 Screws 1
Clips
2 2
3 Tape 2
Washers
M10 Spring Washer
4 2
2 5 1 2
3 ..
1 2
Clean the roof with soap and water. Allow to dry.
Open moon roof.
A
125mm – 130mm
CENTERED EQUALLY =
Center the Moonroof Air Deflector on the roof, and position
125mm – 130mm from the windscreen trailing edge.
Mark Deflector bracket locations using masking tape
A A
Remove the Deflector.
1 2
E
D
then install tape (D) to clean areas.
Clean areas shown using provided wipe (E) dry with a clean cloth
D
DO NOT USE solvent
USE soap and water
based cleaners on
Moonroof Air Deflector.
only to clean
Moonroof Air Deflector.
SGD32
PART NUMBER ISSUE DATE SUBARU PAGE F541SFL000 01 01/13/2020 3/3
Moonroof Air Deflector should not exceed 30mm above moon
roof glass at center. If moon roof Deflector is more than 30mm
check for improper installation and ensure screws and nuts are
tightened securely.
30mm
11.
15.
C
F
B
Before tightening, ensure the rubber seal is flat against the roof
and not curling under itself.
13. 14.
A
10mm
5-7in-lb
5-7in-lb
T
T
Tighten screws and nuts to secure Deflector to roof.
A
125mm – 130mm
CENTERED EQUALLY =
Center the Moonroof Air Deflector on the roof, and position
125mm – 130mm from the windscreen trailing edge.
12.
Push down gently on Deflector (A) so clips
(C) hook under Moonroof sheet metal flange.
A
1
2
SUBARU PAGE
1 de 3
DATE :
2020-01-13
NUMÉRO
01
INSTRUCTIONS
D’INSTALLATION
Outils requis
Tournevis Phillips
SGD32
A
E F G
1x 2x 2x
1x 2x 2x
NUMÉRO DE PIÈCE
F541SFL000
REMARQUES IMPORTANTES
• N’UTILISEZ PAS DE NETTOYANT À SOLVANT SUR LE DÉFLECTEUR D’AIR DU TOIT OUVRANT.
• N’UTILISEZ PAS DE FREIN FILETS (LOCTITE) SUR LES VIS DU DÉFLECTEUR D’AIR.
• UTILISEZ UNIQUEMENT DU SAVON ET DE L’EAU POUR NETTOYER LE DÉFLECTEUR D’AIR.
NUMÉRO DE PIÈCE : F541SFL000
DESCRIPTION : DÉFLECTEUR D’AIR DE TOIT OUVRANT
Le déflecteur d’air est conçu pour réduire le bruit de vent quand le toit ouvrant est en position ouverte.
Toutefois, dans certains cas, le bruit peut être un peu plus fort si le toit est ouvert en inclinaison ou s’il est fermé.
DESCRIPTION DU VÉHICULE : SUBARU CROSSTREK
B C D
: Poser
: Déconnecter
: Connecter
: Enlever
: Desserrer
: Jeter
: Réutiliser
T
Signification des symboles :
10
AUCUN OUTIL ÉLECTRIQUE
2x
: Couple de serrage
: Emplacement des attaches
ou vis
Lisez toutes les étapes avant de commencer et vérifiez
attentivement la liste de pièces. Nettoyez le toit au savon et à l’eau. Laissez-le sécher.
2.
Ouvrez le toit ouvrant.
Décollez l’endos du coussinet en caoutchouc (G) et apposez ce dernier
sur les attaches métalliques (C).
Fixez les attaches (C) sur le déflecteur (A) avec les vis (B)
et les rondelles (G) fournies. Voici la séquence : vis (B), rondelle (F),
lame (A) et attache(C).
Centrez le déflecteur d’air du toit ouvrant sur le toit et à 125 à 130 mm
du bord arrière du pare-brise.
Marquez l’emplacement des supports du déflecteur au moyen de
ruban-cache. Enlevez le déflecteur.
Nettoyez les surfaces indiquées avec la lingette fournie (E), séchez
avec un linge propre puis collez le ruban (D) sur les zones propres. Retirez le ruban-cache
1.
3. 4.
5. 6.
7. 8.
9. 10.
SUBARU
G
C
A
1 2
B
F
C
A
A
A
D
E
D
1 2
SGD32
PAGE
2 de 3
DATE :
2020-01-13
NUMÉRO
01
NUMÉRO DE PIÈCE
F541SFL000
SGD32
1
A
2
10 mm
Le déflecteur d’air du toit ouvrant ne doit pas dépasser de plus de
30 mm au-dessus de la vitre du toit ouvrant au centre. Si le déflecteur
dépasse de plus de 30 mm, vérifiez s’il est bien monté et si les vis et les
écrous sont solidement serrés.
N’UTILISEZ PAS de nettoyant
à solvant sur le déflecteur d’air
du toit ouvrant.
UTILISEZ uniquement du savon
et de l’eau pour nettoyer le
déflecteur d’air de toit ouvrant.
Avant de serrer, assurez-vous que le joint en caoutchouc est bien à
plat contre le toit et non tordu sur lui-même. Serrez les vis et les écrous de montage du déflecteur au toit.
Pressez doucement sur le déflecteur (A) pour que
les attaches (C) s’accrochent sous le rebord de la
tôle du toit ouvrant.
Centrez le déflecteur d’air du toit ouvrant sur le toit et à 125 à 130 mm
du bord arrière du pare-brise.
11. 12.
13. 14.
15.
T5 à 7 po-lb
T5 à 7 po-lb
A
B
F
C
A
SUBARU PAGE
3 de 3
DATE :
2020-01-13
NUMÉRO
01
NUMÉRO DE PIÈCE
F541SFL000
SEOCONTENT-END
https://static.oemdtc.com/AccessoryInstallationGuide/F541SFL000.pdf
- Genuine Subaru Moonroof Air Deflector
- F541SAL000
- Helps reduce wind noise and sun glare.
- 2015-2019 Legacy
- 2015-2019 Outback
- Genuine Subaru Moonroof Air Deflector
- F541SFN000
- 2024 Crosstrek Sport and Limited and Wilderness
- Helps reduce wind noise and sun glare.
- Genuine Subaru Moonroof Air Deflector
- F541SFJ000
- 2013-2017 CROSSTREK
- 2012-2016 IMPREZA
- 2012-2021 STI
- Genuine OEM
- High quality
- Dependability
- ⭐Looking for a way to enhance your driving experience? Look no further than our top-quality sunroof visor! ICBEAMER visor is specifically designed to improve your driving experience by providing a range of benefits that you won't find with any other product on the market.
- ⭐First and foremost, ICBEAMER visor is made from a durable, long-lasting material that can withstand even the toughest weather conditions. It's designed to resist the damaging effects of the sun's UV rays, as well as rain, wind, and other environmental factors that can take a toll on your vehicle over time.
- ⭐In addition to its durability, our visor is also incredibly easy to install. With no cutting or drilling required, you can have it up and running in just minutes, and with our step-by-step video instructions, you won't need any special tools or skills to get the job done right.
- ⭐Once installed, our sunroof visor will allow you to enjoy fresh air even on rainy days, thanks to its unique design that lets you leave your sunroof/moonroof open a few inches without getting wet. It also helps reduce wind noise, keeping your ride quiet and peaceful no matter how fast you're going.
- ⭐To ensure your complete satisfaction with our sunroof visor, we stand behind our product with a warranty that guarantees its quality and performance. If you experience any issues with your visor due to manufacturer defects, simply reach out to us and we'll make it right. Your satisfaction is our top priority, and we're committed to delivering a product that you'll love for years to come.
- ⭐⭐⭐Installation video available: Strongly recommend watch installation video before purchase.
- ⭐Installation Tips: Double side tape cannot be re-apply/re-adhere/reuse once it has been placed onto the vehicle. Position the sunroof visor and align it correctly before removing the red plastic. In-case place it wrong position will require to replace a brand new Double side tape to re-adhere.
- ⭐Feature: Long lasting material designed to withstand the rigors of the elements, 5. Make it possible to leave the sunroof/moon roof open a few inches to get fresh air even on rainy days.
- ⭐Direct tape on OEM style design. No Cutting & No Drilling (High quality Double side tape included).
- ⭐Made of Top Quality Acrylic in Dark Smoke Color UV-resistant Material & Improve Safer Driving. Reduce Wind, Noise & Keep Rain Out. 5 times longer life than other PVC
- FITMENT: This Roof Visor Can Only Fit The Sunroof/Moonroof Which Is Not Wider Than 41.8".Please Measure The Size Of The Sunroof/Moonroof On Your Vehicle First And Make Sure This Is The Correct Item Before Purchase!
- PACKAGE INCLUDED: 1pc 43" (41.8" between the inner edge) universal roof visor(Installation instruction is included,Please read User Instruction before installation)
- DURABLE AND NICE: Our Vent Deflector made with Hardy&Shatterproof premium-quality reinforced acrylic,will not bend, break or crack. Dark smoke colored streamlined flexible design is chosen finest for sun protection,also adding to the appearance of your precious!
- MAKE TRAVEL ENJOYABLE AND SAFE: You can drive in comfort with our rain guards, without worrying about the noisy wind, chilly snow, annoying rain sprays,blazing sunshine. It help improve ventilation to reduce window fogging keep sight clearly make rides safe.
- EASY INSTALLATION:Direct Tape-On design,easy Peel-N-Stick installation and no disturbed in the windows up and down.Easy to remove will not affect your car appearance(No Cutting & No Drilling)
- ✔️ 【Custom-fit Window Visors Rain Guards & Sunroof Compatible with Subaru Forester (2009-2013)】: Ensures A Best Fit And Seamless Integration With Your Specific Vehicle Model. Important: For Proper Sunroof Visors Fit, Measure Your Sunroof And Leave a 1-inch Space On Each Side.
- ☑️ 【Dark-Smoke Reinforced Acrylic & Improved Ventilation】: Rain Guards For Car Windows Offers A Stylish Look And Enhanced Durability For Long-lasting Use. Car Window Visor Reduces Heat Buildup And Allows Fresh Air Circulation Even When Windows Are Partially Open, Keeping Rain Out.
- ☑️ 【Strong, One-Time Application】: For Best Fit, Take Your Time Positioning the Sunroof Visor Before Removing The Red Tape Backing. Our Double-sided Tape Is Designed For a Secure, Long-lasting Bond. Tip: Double-check the Placement Before Applying For Optimal Results.
- ☑️ 【Reduces Wind Noise & Rain Deflection】: Enjoy A Quieter, More Comfortable Ride With Protection From Rain Showers. This Weatherproof Sun Visor Deflects Noise In Windy Weather, Crafted From UV-resistant Material For Lasting Protection.
- ☑️ 【Guaranteed 100% Color Fade Resistance & Easy, No-drill Installation】: Rain Visor For Car Window Maintains A Sleek, Smoke-tinted Appearance, Even With Extended Sun Exposure.. Window Deflectors Attached Securely Using Pre-applied, Automotive-grade Double-sided Tape For a Hassle-free Application.
Last update on 2024-04-16 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.