| “This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10091972
Manufacturer Communication Number: 07-92-15
Summary
THIS SERVICE INFORMATION BULLETIN ANNOUNCES A DESIGN CHANGE TO THE REAR COMBINATION LAMPS TO ADDRESS CUSTOMER CONCERNS OF FOGGING OR CONDENSATION ACCUMULATING ON THE INSIDE SURFACE OF THE LENS. SIX ADDITIONAL BREATHING HOLES HAVE BEEN ADDED TO THE BODY OF THE LAMP ASSEMBLY. THE ADDITIONAL HOLES ARE INTENDED TO PROVIDE ADDITIONAL VENTILATION AND PREVENT FOGGING WHICH MAY RESULT WHEN SEVERE AMBIENT TEMPERATURE CHANGES OCCUR. NOTE: FOGGING IS A NATURAL PHENOMENON AND NOT A DEFECT OR MALFUNCTION.
NUMBER: 07-92-15
DATE: 07/08/15
| APPLICABILITY: | 2015MY Forester |
| SUBJECT: | Condensation (Fogging) in Rear Combination Lamps |
INTRODUCTION
This Service Information bulletin announces a design change to the rear combination lamps to address customer concerns of fogging or condensation accumulating on the inside surface of the lens. Six additional breathing holes have been added to the body of the lamp assembly. The additional holes are intended to provide additional ventilation and prevent fogging which may result when severe ambient temperature changes occur.
NOTE: Fogging is a natural phenomenon and not a defect or malfunction.
COUNTERMEASURE IN PRODUCTION:
The new combination lamps were incorporated into production starting with VIN F*530822.
PART INFORMATION
| PART NAME: | PART NUMBER: |
|---|---|
| LENS & BODY COMPL LH | 84912SG041  |
| LENS & BODY COMPL RH | 84912SG051 |
SERVICE PROCEDURE / INFORMATION
The service procedure for replacement of the combination lamp is unchanged. Refer to the applicable Service Manual for related cautions, notes, procedures and information.
When applicable, see the Labor Time Guide on Subarunet for claim coding details.
REMINDER: SOA strongly discourages the printing and/or local storage of service information as previously released information and electronic publications may be updated at any time.
Always refer to STIS for the latest service information before performing any repairs.
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
SUBARU | FORESTER | 2015 |
1 Associated Document
Service Bulletin Document
NUMBER: 07-92-15
DATE: 07/08/15
SB-10091972-2280.pdf 333.104KB
Loading...
Reload document 
Open in new tab
- Fitment: Replacement for Forester 2014-2016
- Well Sealed Construction: Weather-sealed housing to avoids vapor intrusion, performance tested for poor weathers
- Enhance Driving Security: Special coating on the lens surface avoids fading ensuring proper illumination and operational secure
- Materials: The product is made of good materials and undergoes rigorous testing to ensure structural strength and integrity
- Easy to Install: Plug and Play. Direct replacement of the original parts. Professional installation is recommended for the functionality
- Fitment: Replacement for Forester 2014-2016
- Well Sealed Construction: Weather-sealed housing to avoids vapor intrusion, performance tested for poor weathers
- Enhance Driving Security: Special coating on the lens surface avoids fading ensuring proper illumination and operational secure
- Materials: The product is made of good materials and undergoes rigorous testing to ensure structural strength and integrity
- Easy to Install: Plug and Play. Direct replacement of the original parts. Professional installation is recommended for the functionality
- Tail light assembly replacement for 2014-2016 Subaru
Forester right passenger side - Part Number: 84912SG041, SU2819105
- It has better wear resistance, and aesthetics thats great for show use or to replace old and worn tail light
- Special coating on the lens surface prevents hazing and fading, safe to see at night or in bad weather
- Plug and play installation, perfect match for your tail lights, no wiring or any other modification needed
- 【High-quality Materials】: The tail lights are made of high-quality ABS . Their excellent impact resistance and corrosion resistance make the tail light sturdy and durable.
- 【Easy to Install】: The tail lights are made according to the original specifications and can be perfectly matched with your car. It is directly mounted without modification, which is convenie
- 【Fully Compatible】：Our tail lamp is a customized product, specially tailored for 2010-2014 S-u-b-a-r-u Outback Taillights. Therefore, it is fully compatible with adapted models
- 【Protective Packaging】: The tail lamp is carefully packaged with bubble bags and cartons to avoid damage during transportation. Protective packaging allows products to reach your hands intact.
- 【The Best Service】: If you have any questions about the product, you can contact us at any time, we will reply you as soon as possible!
- Fitment: Replacement for Forester 2017 2018 right side tail light
- Well Sealed Construction: Weather-sealed housing to avoids vapor intrusion, performance tested for poor weathers
- Enhance Driving Security: Special coating on the lens surface avoids fading ensuring proper illumination and operational secure
- Materials: The product is made of good materials and undergoes rigorous testing to ensure structural strength and integrity
- Easy to Install: Plug and Play. Direct replacement of the original parts. Professional installation is recommended for the functionality
- Fitment: Replacement for Forester 2014-2016 tail light
- Package Include: Comes with 1 piece passenger side rear tail light
- Well Sealed Construction: Thoroughly tested to deliver smooth operation and completely sealed to avoids vapor from being trapped inside the housing
- Enhance Driving Secure: The tail light Lens ensure full illumination and enhances your and others driving secure
- Easy Installation: Plug and play, no installation guide or instruction included, it is recommended professional installation
- 🚗【Fits Perfect】-The Taillight is specially designed for 2019-2021 Subaru Forester, LED Taillights component is rear right side, Taillight are directly replaceable, OEM: 84912SJ060
- 🚗【Safety Guard】-Energy saving, bright LED light source, when driving at night, can accurately transmit the information to the vehicle behind, to provide security for you and your family.
- 🚗【High Quality And Durability】-Our Taillights are made of high quality PC materials, with good sealing and toughness to help you drive safer. Make it durable and resistant to environmental damage, including freezing, fogging, fading and so on.
- 🚗【Convenient To Replacement】-Taillights can be installed within minutes, Since they have the same connections and wires as the original cars, the installation steps are simple, and you can replace or install these headlights directly and without purchasing a bulb.
- 🚗【Suggestion】-We are committed to providing you with high-quality products and exceptional customer service. If you have any questions or concerns about our Taillight, please feel free to contact us. Your satisfaction is our top priority.
- OE-comparable harness (no 'pigtail' connector) for hassle-free installation
- OE-comparable mounting provisions ensure drop-in precise fitment
- Rigorous and accelerated cycling tests to ensure product service quality and durability
- Special coating on the lens surface prevents hazing and fading ensuring proper illumination and operational safety
- Meet or exceed DOT/SAE standards with particular consideration for photometric and safety compliance
- High Sealing Technology: The tail light adopts exquisite sealing technology, which can prevent rain or dust from entering the lamp, prolong the service life of the tail light and keep its good performance.
- Sturdy and Durable: The high-quality ABS make the tail light resistant to wear and tear, and weathering and can stand the test of time.
- Increase Safety: The tail light can warn oncoming traffic from behind to avoid unnecessary collisions when slowing down and braking. It helps prevent many accidents in road traffic.
- Fashionable Appearance: The red color scheme and smooth lines make the whole tail light full of fashion and modernity and can be paired with your cars.
- Good Compatibility: This tail light is a customized product, specially customized for 2010-2014 subaru outback, so tail light can be compatible with the adapted models.
- 【EXACT OE FIT】2014-2016 Subaru Forester
- 【Package Included】Brand New in Box, This Product Includes a Comes with a Pair Left Side (Driver Side) & Right Side (Passenger Side) Assembly Ensuring Your Vehicle is Equipped with Quality Components
- 【Excellent Visibility】OE Designed to Specifications for Direct Fit, Ensuring Form and Function for a Straightforward and Quick Installation Process, Providing Ease and Efficiency
- 【DOT Compliance】Compliance with Department of Transportation (DOT) and Society of Automotive Engineers (SAE) Standards, ensuring adherence to rigorous safety and performance criteria established by these respected regulatory bodies
- 【No Installation Guide or Instruction Included】We Highly Recommend Professional Installation for Proper Setup and Optimal Performance, Ensuring Correct Installation and Reliable Functionality.
SEOCONTENT-START
Bulletin Number: 07-92-15; Date: 07/08/15 Page 1 INTRODUCTION This Service Information bulletin announces a design change to the rear combination lamps to address customer concerns of fogging or condensation accumulating on the inside surface of the lens. Six additional breathing holes have been added to the body of the lamp assembly. The additional holes are intended to provide additional ventilation and prevent fogging which may result when severe ambient temperature changes occur. NOTE: Fogging is a natural phenomenon and not a defect or malfunction. COUNTERMEASURE IN PRODUCTION: The new combination lamps were incorporated into production starting with VIN F*530822. PART INFORMATION PART NAME: PART NUMBER: LENS & BODY COMPL LH 84912SG041 LENS & BODY COMPL RH 84912SG051 NUMBER: 07-92-15 DATE: 07/08/15 APPLICABILITY: 2015MY Forester SUBJECT: Condensation (Fogging) in Rear Combination Lamps Continued… CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS. Subaru Service Bulletins are intended for use by professional technicians ONLY. They are written to inform those technicians of conditions that may occur in some vehicles, or to provide information that could assist in the proper servicing of the vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do the job correctly and safely. If a condition is described, DO NOT assume that this Service Bulletin applies to your vehicle, or that your vehicle will have that condition. SUBARU OF AMERICA, INC. IS ISO 14001 COMPLIANT ISO 14001 is the international standard for excellence in Environmental Management Systems. Please recycle or dispose of automotive products in a manner that is friendly to our environment and in accordance with all local, state and federal laws and regulations. Rear view of the new combination lamp showing the 6 additional breathing holes. SERVICE INFORMATION ATTENTION: GENERAL MANAGER q PARTS MANAGER q CLAIMS PERSONNEL q SERVICE MANAGER q IMPORTANT – All Service Personnel Should Read and Initial in the boxes provided, right. ©2014 Subaru of America, Inc. All rights reserved. Bulletin Number: 07-92-15; Date: 07/08/15 Page 2 SERVICE PROCEDURE / INFORMATION The service procedure for replacement of the combination lamp is unchanged. Refer to the applicable Service Manual for related cautions, notes, procedures and information. When applicable, see the Labor Time Guide on Subarunet for claim coding details. REMINDER: SOA strongly discourages the printing and/or local storage of service information as previously released information and electronic publications may be updated at any time. Always refer to STIS for the latest service information before performing any repairs. Torque the 2 retaining bolts to 5.5 ft. lbs.
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END
Last update on 2025-05-08 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
