“This site contains affiliate links for which OEMDTC may be compensated” |
Accessory Installation Guide
2020-2022MY Legacy Pet Friendly Padded Seat Protector | F411SAN030 |
Installation Instructions
Installation Instructions – Legacy / Instructions d’installation – Legacy
PART NUMBER: F411SAN030 / NUMÉRO DE PIÈCE: F411SAN030
DESCRIPTION: Pet-friendly Padded Seat Protector / Housse de siège matelassée pour animaux de compagnie
Kit Contents / Contenu de la trousse
Pet-friendly Padded Seat Protector / Housse de siège matelassée pour animaux de compagnie
TOOLS / MATERIALS REQUIRED: / OUTILS/MATÉRIEL REQUIS: /
None / Aucun
1a
Press the rear seatback lock release button on both ends of the rear seat.
Appuyez sur le bouton de déverrouillage du dossier de siège arrière aux deux extrémités du siège arrière.
1b
Fold down the rear seatback and then press the button to remove the headrest.
Rabattez le dossier de siège arrière, puis appuyez sur le bouton pour retirer l’appuie-tête.
1c
Completely remove rear left and right headrests. Refer to Owner’s Manual for detailed instructions under “Head restraint height adjustment” section. Leave rear seatback unlocked and slightly leaned forward.
Retirez complètement les appuis-tête arrière gauche et droit. Reportez-vous au manuel du propriétaire pour obtenir des instructions détaillées à la section « Réglage de la hauteur des appuis-tête ». Laissez le dossier de siège arrière déverrouillé et légèrement penché vers l’avant.
2
Raise but do not remove rear center headrest by pulling it upward.
Relevez l’appui-tête arrière central sans le retirer en le tirant vers le haut.
3
If needed, expose LATCH anchors by unfolding cover flaps.
Au besoin, exposez les ancrages du système LATCH en dépliant les rabats de la housse.
4
Find center headrest hole in Pet-friendly Padded Seat Protector and hang it over the raised center headrest by passing it through the hole.
Press the rear seatback lock release button on both ends of the rear seat.
Trouvez le trou pour l’appui-tête central sur la housse de siège matelassée pour animaux de compagnie, puis suspendez la housse en faisant passer l’appui-tête central surélevé par le trou.
5
Open Velcro® strip along the right side seatbelt opening and pass the right side of the cover under the center seatbelt.
Détachez la bande Velcro® le long de l’ouverture de la ceinture de sécurité droite et passez le côté droit de la housse sous la ceinture de sécurité centrale.
6
Wrap the cover around and over the top of both sides of the rear seat.
Recouvrez les deux côtés du siège arrière de la housse.
7
Align all headrest holes as shown and then lower center headrest. Push rear seatback and lock in place.
Alignez tous les trous de l’appui-tête comme illustré, puis abaissez l’appui-tête central. Poussez le dossier de siège arrière et verrouillez-le en place.
8
Once the top of the seat cover is aligned, wrap seat cover around the seatbelt and mate the Velcro® strip along the seatbelt opening.
Une fois le haut de la housse de siège aligné, enroulez la housse de siège autour de la ceinture de sécurité et attachez la bande Velcro® le long de l’ouverture de la ceinture de sécurité.
9
Locate the 4 inserts on the back of the Pet-friendly Padded Seat Protector. [Note: Seat cover is folded to show inserts.]
Repérez les 4 languettes à l’arrière de la housse de siège matelassée pour animaux de compagnie. [Remarque : La housse de siège est repliée pour montrer les languettes.]
10
Position the seat cover and tuck bottom center inserts between the seat back and seating surface.
Mettez la housse en place, et insérez les languettes centrales du bas entre le dossier et le siège.
11
Tuck side edge of the seat cover into the plastic trim of the seat. Starting at the front and working your way to the back. (Repeat for the other side)
Insérez le bord latéral de la housse dans l’habillage en plastique du siège, en allant de l’avant vers l’arrière. (Répéter de l’autre côté.)
12
Locate Velcro® sections at the bottom of the seat.
Repérez les bandes Velcro® au bas du siège.
13
Attach Velcro® sections at the bottom of the seat.
Fixez les bandes Velcro® au bas du siège.
14
Locate the fabric tabs on the sides of the Pet-friendly Padded Seat Protector. Gently insert the fabric tab between the seat and the door weatherseal. Slide it back and forth until it settles into the opening and push it in until it disappears. Repeat for the second tab and then repeat for the other side. Note: There is one fabric tab above and below the door-open sensor. While inserting tabs, do not push into sensor.
Repérez les languettes en tissu de chaque côté de la housse de siège matelassée pour animaux de compagnie. Insérez délicatement la languette en tissu entre le siège et le caoutchouc d’étanchéité de la porte. Faites-la glisser d’avant en arrière jusqu’à ce qu’elle se place dans l’ouverture, puis poussez-la jusqu’à la faire disparaître. Répétez l’opération pour la deuxième languette, puis répétez l’opération pour l’autre côté. Remarque : Il y a une languette de tissu au-dessus et en dessous du capteur d’ouverture de porte. Lors de l’insertion des languettes, ne les poussez pas dans le capteur.
15
Ensure seatbelt is accesible, unobstructed and next to the seat cover. Repeat for the other side.
Assurez-vous que la ceinture de sécurité est accessible, dégagée et à côté de la housse de siège. Répéter de l’autre côté.
16a
Press the rear seatback lock release button on both ends of the rear seat.
Appuyez sur le bouton de déverrouillage du dossier de siège arrière aux deux extrémités du siège arrière.
16b
Fold down the rear seatback and then press the button to reinstall the headrest.
Rabattez le dossier de siège arrière, puis appuyez sur le bouton pour réinstaller l’appuie-tête.
16c
Reinstall rear left and right headrests. Refer to Owner’s Manual for detailed instructions under “Head restraint height adjustment” section.
Réinstallez les appuis-tête arrière gauche et droit. Reportez-vous au manuel du propriétaire pour obtenir des instructions détaillées à la section « Réglage de la hauteur des appuis-tête ».
16d
Push rear seatback and confirm that it is in the locked position.
Poussez le dossier de siège arrière et vérifiez qu’il est en position verrouillée.
CLEANING INSTRUCTIONS
1.Using a large washer without agitator, wash the cover in COLD, using a mild all-purpose
cleaner (suitable for fabrics). DO NOT USE BLEACH or HARSH DETERGENTS.
2. Rinse the cover twice (2x) in COLD to remove any residual cleaner.
3. Hang and allow to air dry.
INSTRUCTIONS DE NETTOYAGE
1.Dans une grande laveuse sans agitateur, laver la housse À L’EAU FROIDE à l’aide d’un nettoyant tout usage doux
(convenant aux tissus). NE PAS UTILISER DE JAVELLISANT OU DE DÉTERGENTS CORROSIFS.
2.Rincer la housse à deux(2) reprises À L’EAU FROIDE pour enlever toute trace de nettoyant.
3. Suspendre et laisser sécher à l’air.
SPOTCLEANING INSTRUCTIONS
1 -Mix one ounce of a mild all-purpose cleaner (suitable for fabrics) per quart of warm water.
2 -Spray or sponge onto cover.
3 -Rinse with water (until no suds remain) and allow to air dry.
INSTRUCTIONS DE NETTOYAGE DES TACHES
1–Mélanger une once d’un nettoyant tout usage doux (convenant aux tissus) à une pinte d’eau chaude.
2–Vaporiser le mélange sur la housse ou l’appliquer à l’éponge.
3–Rincer à l’eau (jusqu’à ce qu’il n’y ait plus de mousse) et laisser sécher à l’air.
F411SAN030
https://static.oemdtc.com/AccessoryInstallationGuide/F411SAN030.pdf
“This site contains affiliate links for which OEMDTC may be compensated” |
- Perfect Fitment: Designed according to the original car, the rear backrest mat perfectly compatible with 2019 2020 2021 2022 2023 2024 Subaru Forester. Please check your car model before purchasing.
- Premium Materials: Made of high quality TPE material. TPE back seat protector without any bad smell, can be bent and folded, with strong elasticity and flexibility.
- Abundant functionality: This backrest mats can keep your seat away from getting soiled or scratched. When the trunk cargo shakes and collides while driving, you don't need to worry because our backrest mat will cushion the impact and protect the seat back.
- Easy Installation: The back seat protector is very easy to install and remove. You can clean these mats by using water or a rag.
- Warranty: If you have any questions with the rear backrest mat replacement for your Subaru Forester 2019 2020 2021 2022 2023 2024, please contact us immediately and we will provide a satisfactory after-sales service.
- Fits Most Cars, SUVs, Small Trucks- 44" L ×54" W (medium size), This cover can easily fit in backseats of most standard vehicles, providing tailored comfort and protection for your two and four-legged companion on every journey. Perfectly fit for your Toyota Camry/Avalon/Venza/rav 4, Subaru Forester/Crosstrek/Outlander, Ford Edge/ Flex, Pilot, CR-V, Tesla Model 3/Y, XT 5 Cadillac, Sonata, Pathfinder, Elantra G, Genesis GV70.....
- Waterproof & Non Slip - 3 layers of durable fabric and cotton padding, No heavy chemicals or bad smells; Special non-quilted without needle holes technology makes the seat bottom completely waterproof. 2 seat anchors and nonslip backing keep your cover stay put without leaving,This not only ensures your dog's safety but also keeps them comfortable and at ease during the ride.
- Middle Seat Belt Armrest & LATCH Available- Allows you to use cover for a variety of seating arrangements.All the access areas have velcro openings or zippers for easy access to seat belts, buckles, and armrest/cup holders. Make travel safe and fun for your family.
- Great for Kids - Allansing car seat protector covers the entire seat instead of just one chair- It not only protects your backseat from child seats and food they drop but they are super easy cleanup.so kids could move and eat freely.
- Great for Dogs - A must-have for pet owners on the go! This dog car seat cover protects your car's upholstery from scratches, drooling,shedding,muddy paws and accidental spills. It has make traveling you with your furry friend stress-free and enjoyable.
- Premium Cover Your Seats: Universal car seat cover for cars is made of ergonomic, soft & breathable linen fabric. It provides protection your cloth or leather interior from pets, spills, dirt & sweat with our car seat protector.
- Universal Fit: Suitable for most vehicles, seat covers for Vans, jeep, SUVs, Trucks, CRV. Designed to fit the bench and bucket seats of practically all models
- Easy to Install & Clean: Adjust this cute interior covers to your car seat in seconds to ensure it stays in place. Easily transfer and reuse. The anti-slip backing makes it an ideal car accessory. Machine washable; air dry
- For All Seasons: Car seat protectors is not only soft and tempting to the touch, but are also comfortable for you & your passengers. Front car seat cover for cars are resistant to temperature fluctuations & provides comfort in winter & summer.
- Warranty & Support: Each car seat cover comes with a 30-Day Return Guarantee & 1 Year Warranty against material defects
- Perfect Fitment: Designed according to the original car, the rear backrest mat perfectly compatible with 2018 2019 2020 2021 2022 2023 Subaru Crosstrek/ XV non-hybrid models. Compatible with 2017 2018 2019 2020 2021 2022 2023 Subaru Impreza Hatchback Model. Note that not fit Crosstrek Hybrid Model. Please check your car model before purchasing.
- Premium Materials: Made of high quality TPE material. TPE back seat protector without any bad smell, can be bent and folded, with strong elasticity and flexibility.
- Abundant functionality: This backrest mats can keep your seat away from getting soiled or scratched. When the trunk cargo shakes and collides while driving, you don't need to worry because our backrest mat will cushion the impact and protect the seat back.
- Easy Installation: The back seat protector is very easy to install and remove. You can clean these mats by using water or a rag.
- Warranty: If you have any questions with the rear backrest mat replacement for your 2018-2023 Subaru Crosstrek/XV & 2017-2023 Subaru Impreza Hatchback, please contact us immediately and we will provide a satisfactory after-sales service.
- 🚗【CUSTOMIZED FOR SUV OR CROSSOVER】:Meginc car dog seat covers are uniquely designed and customized for SUV. Such as Toyota RAV4/Honda CR-V/Subaru Forester /Hyundai Tuscon/Kia Sportage/Honda HR-V/Subaru CrossTrek/Ford Escape/Mazda CX-5/Mazda CX-30 /Hyundai Kona/Toyota/Corolla Cross/Mazda CX-50/Kia Seltos/Toyota Venza/Kia Niro/Hyundai Venue/Toyota bZ4X/Subaru Solterra/Honda Prologue/Hyundai Nexo. Reference vehicle models guide found in the image set to the left or further down the page to determine if our protector fits your vehicle.
- 🚗【STURDY MATERIAL】: HEAVYDUTY! HEAVYDUTY! HEAVYDUTY!Meginc dog back seat cover is made of 600D Oxford cloth, 100g soft PP cotton, 210D polyester fabric, 100% waterproof TPU and PVC anti-slip mesh. A thick pet seat cover can mitigate the damage of your vehicle and protect carpet, upholstery from unpleasantries such as dog hair, urine, or vomit, moreover our protectors also providing a familiar, comfortable and safety space for your pets during the road travel.
- 🚗【EASILY INSTALL & CLEAN】: Meginc dog car seat cover install was less than 5 minutes and also easil to disassemble. When you finish using the bench seat cover, you can quickly fold up and put it back into the original storage bag. You can easily clean to the pet seat cover with a damp cloth or vacuum cleaner.
- 🚗【Dog Seat Cover for Back Seat】Provide full protection for your car. Thoughful design and thick materials make you feel more nice when using dog seat covers.
- 🚗【Seat Cover Will Not Slip and Slide】Meginc Bench Seat Covers is a full sized SUV seat cover and it is firm and will not slip around when you used the seat anchors.There are fixed elastic straps on both sides of the bottom. The bottom seat anchor is inserted into the seat. It is not easy to move when pets playing, and the cushion will not slide.
- 【Compatibility】The seat back covers are perfect for SUBARU Outback 2021 2022 2023 2024 Include 2*Seat back cover
- 【Design】The seatback protectors are segmented so you can fold either of the rear seats instead of both at the same time. Increase flexibility of use. Does not affect the folding function of the original car seat
- 【Material】Made of high-quality TPE flexible material, waterproof, scratch-resistant, corrosion-resistant, non-toxic and environmentally friendly, easy to clean
- 【Experience】Now you can use your trunk boldly, and the seatback protector keeps the seatback free from pet hair and sharp objects. Give you a more enjoyable and free experience
- 【Installation】Non-destructive installation in the form of Hook&Loop fastener is simple and convenient. The installation and removal process will not damage the car
- SOFT-FEELING MATERIAL ON TOP: Unlike other stiff dog seat covers, we use very soft-feeling micro fiber material for your pets. Let them feel comfortable on every trip. It is also waterproof and machine washable
- 3 SEATBELTS & ARMREST ACCESSIBLE: Easy to access the middle seat belt and cup holder armrest with this bench seat cover. Just zip up or unzip the back cover. It allows for your passengers to access the front foot area
- LATCH ANCHORS ACCESSIBLE: We’ve considered all about your needs. So we added 4 openings for 3 seat belts and car seat latches. No matter for two-legged or four-legged passengers, it is sufficient
- SECURED WITH 3 HEADREST STRAPS: With the added detachable strap for the middle headrest, the pet car seat cover will stay in place well. You can also remove this extra strap if don’t need. Easy to use with hooks
- SEVERAL CONVENIENT POCKETS: No more worries for dog leashes, pet toys and other sundries in your car. There has several pockets in multiple places on this back seat cover. Store things at wherever you can get
- Genuine Subaru Ascent Rear Seat Back Protector
- J501SXC150
- For Captain Bucket seats. We have bench seat in our store
- Now available for 2nd row seat backs! Provides additional protection when lowering the seats in the 2nd row when transporting even larger cargo. Use in conjunction wit the Rear Seatback Protector - 3rd Row Bench and Cargo Tray for optimal protection.
- 2019 2020 2021 2022 2023 2024 Ascent
Last update on 2024-07-08 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
DATE 04/20/2021 PAGE 1 OF 6 SUBARU OF AMERICA Kit Contents / Contenu de la trousse None / Aucun TOOLS / MATERIALS REQUIRED: / OUTILS/MATÉRIEL REQUIS: / Pet-friendly Padded Seat Protector / Housse de siège matelassée pour animaux de compagnie DESCRIPTION: Pet-friendly Padded Seat Protector / Housse de siège matelassée pour animaux de compagnie KIT CONTENTS: / CONTENU: PART NUMBER: F411SAN030 / NUMÉRO DE PIÈCE: F411SAN030 Installation Instructions – Legacy / Instructions d’installation – Legacy Form #1350082 1a 1b 1c 2 3 4 DATE 04/20/2021 PAGE 2 OF 6 SUBARU OF AMERICA Fold down the rear seatback and then press the button to remove the headrest. If needed, expose LATCH anchors by unfolding cover flaps. Au besoin, exposez les ancrages du système LATCH en dépliant les rabats de la housse. Find center headrest hole in Pet-friendly Padded Seat Protector and hang it over the raised center headrest by passing it through the hole. Press the rear seatback lock release button on both ends of the rear seat. Trouvez le trou pour l’appui-tête central sur la housse de siège matelassée pour animaux de compagnie, puis suspendez la housse en faisant passer l’appui-tête central surélevé par le trou. Completely remove rear left and right headrests. Refer to Owner’s Manual for detailed instructions under “Head restraint height adjustment” section. Leave rear seatback unlocked and slightly leaned forward. Retirez complètement les appuis-tête arrière gauche et droit. Reportez-vous au manuel du propriétaire pour obtenir des instructions détaillées à la section « Réglage de la hauteur des appuis-tête ». Laissez le dossier de siège arrière déverrouillé et légèrement penché vers l’avant. Raise but do not remove rear center headrest by pulling it upward. Relevez l’appui-tête arrière central sans le retirer en le tirant vers le haut. Appuyez sur le bouton de déverrouillage du dossier de siège arrière aux deux extrémités du siège arrière. Rabattez le dossier de siège arrière, puis appuyez sur le bouton pour retirer l’appuie-tête. Form #1350082 5 6 7 8 DATE 04/20/2021 PAGE 3 OF 6 Once the top of the seat cover is aligned, wrap seat cover around the seatbelt and mate the Velcro® strip along the seatbelt opening. Une fois le haut de la housse de siège aligné, enroulez la housse de siège autour de la ceinture de sécurité et attachez la bande Velcro® le long de l’ouverture de la ceinture de sécurité. SUBARU OF AMERICA Wrap the cover around and over the top of both sides of the rear seat. Open Velcro® strip along the right side seatbelt opening and pass the right side of the cover under the center seatbelt. Recouvrez les deux côtés du siège arrière de la housse. Align all headrest holes as shown and then lower center headrest. Push rear seatback and lock in place. Détachez la bande Velcro® le long de l’ouverture de la ceinture de sécurité droite et passez le côté droit de la housse sous la ceinture de sécurité centrale. Alignez tous les trous de l’appui-tête comme illustré, puis abaissez l’appui-tête central. Poussez le dossier de siège arrière et verrouillez-le en place. Form #1350082 9 10 11 12 DATE 04/20/2021 PAGE 4 OF 6 Locate the 4 inserts on the back of the Pet-friendly Padded Seat Protector. [Note: Seat cover is folded to show inserts.] Repérez les 4 languettes à l’arrière de la housse de siège matelassée pour animaux de compagnie. [Remarque : La housse de siège est repliée pour montrer les languettes.] Position the seat cover and tuck bottom center inserts between the seat back and seating surface. SUBARU OF AMERICA Locate Velcro® sections at the bottom of the seat. Repérez les bandes Velcro® au bas du siège. Mettez la housse en place, et insérez les languettes centrales du bas entre le dossier et le siège. Tuck side edge of the seat cover into the plastic trim of the seat. Starting at the front and working your way to the back. (Repeat for the other side) Insérez le bord latéral de la housse dans l’habillage en plastique du siège, en allant de l’avant vers l’arrière. (Répéter de l’autre côté.) Form #1350082 13 14 15 16a DATE 04/20/2021 PAGE 5 OF 6 Locate the fabric tabs on the sides of the Pet-friendly Padded Seat Protector. Gently insert the fabric tab between the seat and the door weatherseal. Slide it back and forth until it settles into the opening and push it in until it disappears. Repeat for the second tab and then repeat for the other side. Note: There is one fabric tab above and below the door-open sensor. While inserting tabs, do not push into sensor. Repérez les languettes en tissu de chaque côté de la housse de siège matelassée pour animaux de compagnie. Insérez délicatement la languette en tissu entre le siège et le caoutchouc d’étanchéité de la porte. Faites-la glisser d’avant en arrière jusqu’à ce qu’elle se place dans l’ouverture, puis poussez-la jusqu’à la faire disparaître. Répétez l’opération pour la deuxième languette, puis répétez l’opération pour l’autre côté. Remarque : Il y a une languette de tissu au-dessus et en dessous du capteur d’ouverture de porte. Lors de l’insertion des languettes, ne les poussez pas dans le capteur. SUBARU OF AMERICA Attach Velcro® sections at the bottom of the seat. Fixez les bandes Velcro® au bas du siège. Ensure seatbelt is accesible, unobstructed and next to the seat cover. Repeat for the other side. Press the rear seatback lock release button on both ends of the rear seat. Assurez-vous que la ceinture de sécurité est accessible, dégagée et à côté de la housse de siège. Répéter de l’autre côté. Appuyez sur le bouton de déverrouillage du dossier de siège arrière aux deux extrémités du siège arrière. Form #1350082 16b 16c 16d DATE 04/20/2021 PAGE 6 OF 6 Push rear seatback and confirm that it is in the locked position. Poussez le dossier de siège arrière et vérifiez qu’il est en position verrouillée. Reinstall rear left and right headrests. Refer to Owner’s Manual for detailed instructions under “Head restraint Fold down the rear seatback and then press the button height adjustment” section. to reinstall the headrest. Réinstallez les appuis-tête arrière gauche et droit. Reportez-vous au manuel du propriétaire pour obtenir des instructions détaillées à la section « Réglage de la hauteur des appuis-tête ». Rabattez le dossier de siège arrière, puis appuyez sur le bouton pour réinstaller l’appuie-tête. SUBARU OF AMERICA CLEANING INSTRUCTIONS 1. Using a large washer without agitator, wash the cover in COLD, using a mild all-purpose cleaner (suitable for fabrics). DO NOT USE BLEACH or HARSH DETERGENTS. 2. Rinse the cover twice (2x) in COLD to remove any residual cleaner. 3. Hang and allow to air dry. INSTRUCTIONS DE NETTOYAGE 1. Dans une grande laveuse sans agitateur, laver la housse À L’EAU FROIDE à l’aide d’un nettoyant tout usage doux (convenant aux tissus). NE PAS UTILISER DE JAVELLISANT OU DE DÉTERGENTS CORROSIFS. 2. Rincer la housse à deux (2) reprises À L’EAU FROIDE pour enlever toute trace de nettoyant. 3. Suspendre et laisser sécher à l’air. SPOT CLEANING INSTRUCTIONS 1 – Mix one ounce of a mild all-purpose cleaner (suitable for fabrics) per quart of warm water. 2 – Spray or sponge onto cover. 3 – Rinse with water (until no suds remain) and allow to air dry. INSTRUCTIONS DE NETTOYAGE DES TACHES 1 – Mélanger une once d’un nettoyant tout usage doux (convenant aux tissus) à une pinte d’eau chaude. 2 – Vaporiser le mélange sur la housse ou l’appliquer à l’éponge. 3 – Rincer à l’eau (jusqu’à ce qu’il n’y ait plus de mousse) et laisser sécher à l’air. Form #1350082
**************************************************************************************************************
SEOCONTENT-END