“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10201031
Manufacturer Communication Number: 05-87-21
Summary
This bulletin announces a design change made to the front stabilizer bar bushing clamps.
NUMBER: 05-87-21
DATE: 08/06/21
INTRODUCTION:
This bulletin announces a design change made to the front stabilizer bar bushing clamps. The new clamps have added reinforcement flanges with directional holding claws. They are left and right side specific and can be identified by physical (L – R) markings. Due to the new design, there will be a change to the service procedure for installing the stabilizer bar.
PRODUCTION CHANGE INFORMATION:
- The new clamps were incorporated into Outback production starting the VIN N3100023.
- The new clamps were designed for 22MY Outback Wilderness. They were being introduced into 21MY SIA produced vehicles as a running change prior to the start of 22MY Outback Wilderness production.
PART INFORMATION:
REMINDER: Always order the most up-to-date replacement parts based on the specific VIN being repaired.
Part Description | Part Number |
CLAMP-STABILIZER BUSHING RH | 20416AN000 |
CLAMP-STABILIZER BUSHING LH | 20416AN010 |
NOTE:
- Always use parts matching those on the vehicle from the factory (Original Equipment parts).
- Do NOT attempt to use NEW style parts on vehicles equipped with OLD style parts or use OLD style parts on a newer vehicle.
- Do NOT mix the old-style parts and new-style parts in one vehicle. The new-style parts have a different performance. Always match the original equipment.
SERVICE PROCEDURE / INFORMATION:
REMINDER: Customer satisfaction and retention starts with performing quality repairs.
Installing the NEW clamps:
Using the applicable Subaru Service Manual: Suspension > Stabilizer > STABILIZER BUSHING
- Vehicles produced after the production change utilize clamp p.n.s 20416AN000 and 20416AN010.
- Install the clamp with the peak of triangle facing the front of the vehicle.
- REMINDER: the shape of the clamps is different from left to right.
NOTE: The Service Manual uses a black star () in the component breakdown illustrations to indicate one-time use parts. EXAMPLE: In a case where the stabilizer bar links are disconnected, the retaining nuts for the links are one-time use and must be replaced at reassembly.
6 Affected Products
Vehicles
MAKE | MODEL | YEAR |
SUBARU | ASCENT | 2021 |
SUBARU | IMPREZA | 2021 |
SUBARU | LEGACY | 2021-2022 |
SUBARU | OUTBACK | 2021-2022 |
1 Associated Document
Manufacturer Communications
NUMBER: 05-87-21
DATE: 08/06/21
https://www.nhtsa.gov/recalls?nhtsaId=10201031
MC-10201031-0001.pdf 1220.022KB
“This site contains affiliate links for which OEMDTC may be compensated” |
- Fit for Saab 9-2X 2005-2006 / for Subaru Baja 2003-2006 / for Subaru Forester 1998-2002 / for Subaru Impreza 1993-2007 / for Subaru Legacy 1998-2004 / for Subaru Outback 2000-2004 & more.Please see the below for full vehicle list.
- Replace Part Number : K80693 4553923 455339225 488264 4882285
- Condition: Brand New Replacement Product, works as genuine parts, 100% OEM Compatible!!
- High Quality: The sway bar links are manufactured from premium materials and is rigorously tested to ensure reliable performance and durability.
- Direct Fit: Direct replacement for a proper fit and easy installation, quality materials used, meets or exceeds OEM standards, 100% tested before shipping.
- COMPATIBILITY – Fits 2013-2015 Subaru XV Crosstrek; 2015-2019 Subaru WRX; 2015-2019 Subaru WRX STI; 2016-2017 Subaru Crosstrek; 2006-2007 Subaru B9 Tribeca; 2014-2018 Subaru Forester; 2008-2014 Subaru Tribeca; 2010-2014 Subaru Outback
- GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes
- EASY TO INSTALL -- Wrench flats ensure easy installation and removal
- GREASEABLE SOCKET -- Inhibits corrosion and wear by allowing new lubricant to flush debris
- KEEPS DIRT AND WATER OUT -- Sealed boot shields internal components from wear-causing debris
- 【Compatibility】Stabilizer Bar Links compatible with 2003-2013 Forester,2002-2016 Impreza Sedan,2002-2014 Impreza WRX Sedan,2011-2014 Impreza WRX STi Sedan,2004-2007 Impreza WRX STi,2005-2009 Legacy,2005-2009 Outback.
- 【FUNCTION】New Sway Bar Links can solve the abnormal noise and vibration caused by damage or wear of your Sway Bar End Link, make your driving more comfortable and safe, and provide you with a better driving experience.
- 【Smoothy And Safety】Replacing a new Stabilizer Link can reduced vibration and better anti-roll control while driving,make your vehicle steer easily,achieve better control and safer driving and also protecting the tire.
- 【Easy To Install】Use a wrench to loosen nuts that connect between Stabilizer Bar and suspension part ,then replace the new Stabilizer Bar.Perfect replacement for your original stabilizer bar.
- 【1-Year Warranty】If you are not 100% satisfied with our Sway Bar,we will REPLACEMENT or REFUND it unconditionally.If you have any questions please contact us by amazon email.
- Fit : 2003-2013 for Subaru Forester / 2002-2016 for Subaru Impreza Sedan / 2002-2014 for Subaru Impreza WRX Sedan / 2011-2014 for Subaru Impreza WRX STi Sedan / 2004-2007 for Subaru Impreza WRX STi / 2005-2009 for Subaru Legacy / 2005-2009 for Subaru Outback
- Replace Part Number : K750049 20470SA000
- Placement on Vehicle: Front Left + Front Right
- Please refer to the listing pictures for an accurate description of the parts included in the kit.
- EFFECTION - Replacing a front stabilizer link link can reduced vibration and better anti-roll control while driving,make your vehicle steer easily make achieve better control and safer driving and also protecting the tire.
- Compatible for Subaru 20414SG000
- 2Pcs Front Suspension Stabilizer Sway Bar Bushing
- Direct Fitment and Perfect Replacement.
- If any questions, Please contact us by email as soon as possible. We will provide free Replacement or Refund based on your problems.
- COMPATIBILITY – Fits 2013-2014 Subaru WRX; 2013-2014 Subaru WRX STI; 2003-2008 Subaru Forester; 2009-2013 Subaru Forester; 2002-2007 Subaru Impreza; 2008-2015 Subaru Impreza; 2005-2009 Subaru Legacy; 2005-2009 Subaru Outback
- GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes
- EASY TO INSTALL -- Wrench flats ensure easy installation and removal
- GREASEABLE SOCKET -- Inhibits corrosion and wear by allowing new lubricant to flush debris
- KEEPS DIRT AND WATER OUT -- Sealed boot shields internal components from wear-causing debris
- ✔Compatible with: For Subaru: 2003-2013 Forester All Models丨2002-2007 Impreza Sedan Models Only丨2008-2015 Impreza All Models丨2005-2009 Legacy All Models丨2005-2009 Outback All Models. Please make sure to match the exact part numbers between this part and the part that you are replacing.
- ✔Function: Signs your sway bar links need replacement include clunking sounds during turns and bumps, loose or misaligned steering wheel, poor handling, uneven tire wear, and visible damage in the suspension system. Replace our accessories, can take away the clunking/clicking coming from the suspension you heard from every bumps in the road! Giving you a good driving experience.
- ✔High-quality: Long lasting surface treatment that matches OE standard is applied in Zn-Ni alloy coating method method to prevent rust, the corrosion resistance of salt spray test exceeds 800 hours. Neoprene rubber have more resistance to oxidation, more abrasion resistance, more flame resistance. Also, application of carbon steel, extra heat treatment and cold forging technique reinforces fatigue strength of the ball stud to deliver safe mobility.
- ✔OE# K750049. Replace OE# 20420AG00A, 20470FE000, 20470SA000. Easy to install- Wrench flats ensure easy installation and removal, make sure you use an allen wrench to hold the middle while you tighten the bolt.
- ✔After-Sales Service: We offer 24 hours customer service and 1 year product service, If you are encounter product installation, product quality and other problems, please feel free to contact us.
- Premium Quality:Made following stringent OE specifications by an OE manufacturer.Each Sway Bar Stabilizer Link undergo strict quality control not just before shipping but throughout the production process.During each step of production multiple quality control checks are performed to ensure a long,Trouble-free service life.
- Upgraded Durability:At TUCAREST,We application engineer,design,manufacture and test all of our products to meet or exceed OEM equivalent parts in terms of aesthetics and performance.
- Replacement: Signs your sway bar link need replacement include clunking sounds during turns and bumps, loose or misaligned steering wheel, poor handling, uneven tire wear, and visible damage in the suspension system.
- Perfect Fit:Engineered and tested to match the fit,function and performance of the original Stabilizer Bar Link Kit on specified vehicles.Easy to install by direct replacement.Replace our accessories, can take away the clunking/clicking coming from the suspension you heard from every bumps in the road! Giving you a good driving experience.
- PLEASE NOTE: Before placing the order, please check your car model in the Amazon Fitment Filter System in the top left corner,Do not count on year make and model only,please view compatability tab including the notes,or send us a message to make sure it matches exactly.
- Every TRW part has four levels of testing/technical/audit review before approval is given including endurance testing of 500K cycles
- Made with thermoplastic to increase flexibility and avoid cracking, providing a superior lifespan
- Low friction design restores steering and suspension systems back to their original operating performance
- For confirmed fitment of this TRW Suspension Stabilizer Bar Bushing Kit please verify your vehicle with the Amazon 'Check Fit' option
- Fits: Subaru Baja: 2003 - 2006, Subaru Forester: 2003 - 2008, Subaru Impreza: 2002 - 2007, Subaru Legacy: 1996 - 2004, Subaru Outback: 2000 - 2004
Last update on 2024-04-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
Bulletin Number: 05-87-21; Date: 08/06/21 Page 1 of 3 SERVICE BULLETIN Continued… CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS. Subaru Service Bulletins are intended for use by professional technicians ONLY. They are written to inform those technicians of conditions that may occur in some vehicles, or to provide information that could assist in the proper servicing of the vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do the job correctly and safely. If a condition is described, DO NOT assume that this Service Bulletin applies to your vehicle, or that your vehicle will have that condition. Subaru of America, Inc. is ISO 14001 Compliant ISO 14001 is the international standard for excellence in Environmental Management Systems. Please recycle or dispose of automotive products in a manner that is friendly to our environment and in accordance with all local, state and federal laws and regulations. NUMBER: 05-87-21 DATE: 08/06/21 APPLICABILITY: 2021-22MY Impreza 2021-22MY Legacy / Outback 2021-22MY Ascent SUBJECT: Front Stabilizer Bar Bushing Clamp – Design Change INTRODUCTION: This bulletin announces a design change made to the front stabilizer bar bushing clamps. The new clamps have added reinforcement flanges with directional holding claws. They are left and right side specific and can be identified by physical (L – R) markings. Due to the new design, there will be a change to the service procedure for installing the stabilizer bar. Front Stabilizer Bar Bushing Clamp PRODUCTION CHANGE INFORMATION: • The production change information for Impreza, Legacy, and Ascent is TBD. • The new clamps were incorporated into Outback production starting the VIN N3100023. • The new clamps were designed for 22MY Outback Wilderness. They were being introduced into 21MY SIA produced vehicles as a running change prior to the start of 22MY Outback Wilderness production. ATTENTION: GENERAL MANAGER q PARTS MANAGER q CLAIMS PERSONNEL q SERVICE MANAGER q IMPORTANT – All Service Personnel Should Read and Initial in the boxes provided, right. © 2021 Subaru of America, Inc. All rights reserved. Bulletin Number: 05-87-21; Date: 08/06/21 Page 2 of 3 Continued… PART INFORMATION: OLD NEW OLD NEW REMINDER: Always order the most up-to-date replacement parts based on the specific VIN being repaired. Part Description Part Number CLAMP-STABILIZER BUSHING RH 20416AN000 CLAMP-STABILIZER BUSHING LH 20416AN010 NOTE: • Always use parts matching those on the vehicle from the factory (Original Equipment parts). • Do NOT attempt to use NEW style parts on vehicles equipped with OLD style parts or use OLD style parts on a newer vehicle. • Do NOT mix the old-style parts and new-style parts in one vehicle. The new-style parts have a different performance. Always match the original equipment. SERVICE PROCEDURE / INFORMATION: REMINDER: Customer satisfaction and retention starts with performing quality repairs. Installing the NEW clamps: Bulletin Number: 05-87-21; Date: 08/06/21 Page 3 of 3 Using the applicable Subaru Service Manual: Suspension > Stabilizer > STABILIZER BUSHING • Vehicles produced after the production change utilize clamp p.n.s 20416AN000 and 20416AN010. • Install the clamp with the peak of triangle facing the front of the vehicle. • REMINDER: the shape of the clamps is different from left to right. NOTE: The Service Manual uses a black star () in the component breakdown illustrations to indicate one-time use parts. EXAMPLE: In a case where the stabilizer bar links are disconnected, the retaining nuts for the links are one-time use and must be replaced at reassembly. WARRANTY / CLAIM INFORMATION: For vehicles within the Basic New Car Limited Warranty period or covered by an active Subaru Added Security Classic or Gold plan, this repair may be submitted using the following claim information: Labor Description Labor Operation # Fail Code Labor Time ONE FRONT STABILIZER BAR BUSHING/BRACKET R&R A611301 NAG-43 0.2 BOTH FRONT STABILIZER BAR BUSHING/BRACKET R&R A611304 0.3 IMPORTANT REMINDERS: • SOA strongly discourages the printing and/or local storage of service information as previously released information and electronic publications may be updated at any time. • Always check for any open recalls or campaigns anytime a vehicle is in for servicing. • Always refer to STIS for the latest service information before performing any repairs.
**************************************************************************************************************
SEOCONTENT-END