2022 Subaru Forester (Base, Premium and Limited) Front Bumper Under Guard

“This site contains affiliate links for which OEMDTC may be compensated”

Accessory Installation Guide

2022MY Forester (Base, Premium and Limited) Front Bumper Under Guard 57734SJ080

 

INSTALLATION INSTRUCTIONS

PART NUMBER: 57734SJ080

DESCRIPTION: Forester Front Bumper Under Guard

 

TOOLS REQUIRED:

Plastic Trim Tool

 

1

Disconnect the ground cable from battery.

 

2

Remove Front Bumper

 

2a

Disconnect Front Camera (if applicable)

 

2b

Remove clips (22x)

 

2c

Separate Front Bumper from Body

While pushing up the lower side (a) of the bumper face front, release the engagement in the order from (b) to (f).

 

2d

Disconnect the fog light connect (if applicable). Both sides

 

2e

Remove the bumper face front while pulling up the center part of the bumper

 

3

Separate Front Bumper Under Guard from Front Bumper

 

3a

Remove push clips 2x

 

3b

Release clips and remove 8x

 

4

Install new Front Bumper Under Guard

 

4a

Insert Clips 2x

 

5

Install Front Bumper – See step 2 through 2e (reversed)

 

6

Connect ground cable from battery

 


2022MY Forester (Base, Premium and Limited) Front Bumper Under Guard

57734SJ080

https://techinfo.subaru.com/stis/doc/accInstallGuide/2022%20Forester%20FBUG%20Installation%20Instructions.pdf

https://static.oemdtc.com/AccessoryInstallationGuide/57734SJ080.pdf

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [525.75 KB]

 


 

“This site contains affiliate links for which OEMDTC may be compensated”
Bestseller No. 1
SaleBestseller No. 2
Subaru Fold Out Rear Bumper Protector Outback Ascent Forester Legacy WRX Sti Crosstrek Impreza E101EAJ501
SaleBestseller No. 3
GOOACC GRC-70 35PCS Engine Under Cover Splash Shield Guard Body Bolts Bumper Fender Liner Push Retainer Fastener Rivet Clips , black
  • Brand New Engine Splash Shield Bolts Hardware Kit Fender Bumper Clips Rivets direct replacement and perfect fitment.Fit Type: Universal
  • The extruded U-nuts can be used to replace/fix to the bumper
  • The clips are widely used for radiator yoke trim panel door trim door panel bumper car fender flare side skirt grille wheel well air intake engine cover mud flap and splash guard shield retainers rivet clips replacement
  • Fits Infiniti G35 G37 FX35 FX45 EX35 Nissan 370Z 350Z (see details)
  • Package includes 10pcs Extruded U-nuts - Replace/Fix to the Bumper(CORROSION RESISTANT) 15pcs Body Bolts with Built-in Fender Washer (CORROSION RESISTANT) 10pcs Plastic Push Clips as pictured
Bestseller No. 4
Toryea Rear Bumper Protector Guard Accessory Trim Cover Compatible with Subaru Forester 2019
  • 【Fitment】: Rear Bumper Cover Protector Subaru Forester 2019 2020 2021 2022 2023
  • 【Install】: Installs easily with 3M Double Sided Tape, please ensure the surface is clean before applying
  • 【Design】: Textured surface provides slip resistance, provide slip resistance and channels away water
  • 【High Quality】: High quality silicone polymer material, heat /cold resistance, abrasion resistance, waterproof & UV resistance
  • 【Function】: Measured, pre-cut, and precision engineered to match, add protection against scuffs, nicks, scratches, and other damaging marks
SaleBestseller No. 5
HECASA Rear Bumper Cover Protector Trim Compatible with 2018 2019 2020 2021 2022 2023 Subaru Crosstrek Replacement for E771SFL100 Trunk Door Entry Guards
  • FITMENT - Compatible with 2018-2023 Subaru Crosstrek. Replacement part number: E771SFL100.
  • FEATURE - Rear bumper cover protector replacement, provide protection for the upper surface from scratches. Protect the paint and give your vehicle a new appearance.
  • MATERIAL - This brand new bumper cover is constructed of heavy duty plastic to ensure a long lasting service life under outdoor conditions, UV-Resistant and Anti-Scratch, preventing scuffs and gouges.
  • DESIGN - Custom fit design for maximum coverage damage. Surface design with grooves and textures, non-slip function, preventing the falling of things.
  • INSTALLATION - Install with 3M adhesive. Before installing, wipe off the dirty oil and attach it. Carefully place the product in the correct position and press it. Do not wash the car for 24 hours to get good adhesion. Instruction and mounting hardware are NOT included.
Bestseller No. 6
LOSTAR Engine Splash Shield Skid Plate Front Lower for 2015-2022 Sub-aru WRX STI
  • ✅Features: Not only will it protect better than the plastic splash guard, it will strengthen your bumper and make your vehicle easier to work on. Side brackets offer additional support and aid in keeping the engine clean from the sides. Keeping the engine clean and offering much better protection.
  • ✅Compatibility: 2015-2022 Sub-aru WRX STI 2.5L
  • ✅Made from high-quality aluminum materials, Lightweight and much more protection. These added holes to help hot air escape from the engine compartment. So as to improve the airflow.
  • ✅Package Includes: 1 x Engine Splash Shield Skid Plate / Material: Aluminum / Placement on Vehicle: Front, Lower. / Finish: Gloss. / Color: Silver. / Type: Splash Guard.
  • ✅1 Year Unlimited-mileage Quality Guarantee. Please feel free to contact us if you have any questions. Fits models with years 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Bestseller No. 7
Zlirfy 35PCS Engine Under Cover Splash Shield Guard Body Bolts Screws,Bumper Fender Liner Push Retainer Fastener Rivet Clips,Bumper Clips Extruded U-Nuts Kit,Replacement for G35 G37 FX35 FX45
  • [Package Includes]The car clip kit includes 10 extruded U-nuts, 15 body bolts with built-in fender washers, and 10 plastic push clips. Sufficient quantity to meet your daily replacement needs.
  • [Durable Materials]The body bolts of the engine lower cover mudguard are made of high hardness steel or high-quality nylon material, which is resistant to strong impact and high-pressure wear. It can resist factors such as road salt, water, and dirt.
  • [Compatible Models] G35 sedan from 2003 to 2008; 2003-2007 G35 sports car; 2008-2014 G37 and G37X; 2003-2008 FX35&FX45; 2008-2012 EX35; 370Z from 2009 to 2014, 350Z from 2003 to 2009.
  • [Widely Used] This hood hardware kit can be used for door trims, door panels, trim panels, radiator yokes, bumpers, car fender horns, side skirts, grilles, wheel cabins, air intakes, engine hoods, mudguards, and fender retainer rivet clips.
  • [Essential] Universal body bolts suitable for cars, including screws and fasteners for installing the lower hood on the car. If you have an old car with fragile and rusty clips, this is a must-have.
Bestseller No. 8
Tinideya Large Bumper Guard for Cars 36 x 25 Inches Rear Bumper Protector Foldable Universal SUV Trunk Mat for Preventing Scratches While Unloading and Loading, Black
  • The Guardian of Your Car's Rear Bumper: as a car rear bumper protector guard, this quality product is large and provides reliable protection for your vehicle; Measuring approximately 36 x 25 inches/ 92 x 64 cm, it offers comprehensive coverage for your trunk, protecting cargo from scratches and damages
  • A Shield Built to Last: crafted from quality oxford cloth, this rear bumper protector is designed for endurance; It resists wear and tear, promising a long lasting service, offering impressive longevity and keeping your car in showroom condition for longer
  • Universal Design for Ideal Convenience: the car bumper protector is not just about protection, but also versatility; It fits a wide range of vehicles, prevent the rear bumper from scratch and damage when transporting or placing heavy objects and boxes in the trunk, keeping your trunk clean and organized
  • Enhanced Protection Effect: this bumper protector doesn't only cover, it ensures enhanced protection effect; Designed to shield your vehicle's surface from dirt, scratches, and other potential damages; The large size means larger area can disperse and absorb more impacts, thus better protecting your trunk from being bumped or scratched in daily use
  • Effortless Installation and Storage: installing this car bumper protector guard is a breeze with 2 added straps and buckles can be easily fixed in car trunk; There is nylon fastener tape on the head, which makes it easy to fold the guard for storage, and you can pull it off when needed and fold it up when not in use for convenient storage
Bestseller No. 9
Rear Bumper Protector Guard for Subaru Outback 2021 2022 2023 2024 Trim Cover Scratch Resistant Trunk Door Entry Guards.
  • 【Fitment】:Rear Bumper Protector Guard for Subaru Outback 2021 2022 2023 2024
  • 【EASY installation】:This rear bumper guard is very durable,flexible,will not crack or break, glue tape is coming under the trim, just stick on sill, easy to install.
  • 【HIGH-quality materials】: The rear bumper protector is Made of high quality silicone polymer material. heat /cold resistance, abrasion resistance, anti-aging, waterproof & UV resistance. Hardness 60 (Shore A).
  • 【Function】: The car accessories effectively protect car rear bumper when loading or unloading luggages, groceries, tools box and so on, It prevents nasty scratches and provides protection. Also it can be used to cover any existing scratches, paint damage. The fashionable appearance can not only make your car look cool, but also protect your car.
  • 【Attention】: Installed with 3M Double Sided tape, please ensure the surface is free of dirt and waxes before applying.
Bestseller No. 10
Subaru 2019-2024 Subaru Forester Rear Bumper Cover Protector Guard E771SSJ000 Genuine OEM

Last update on 2024-03-18 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

 


Leave a Comment

Share to...