| “This site contains affiliate links for which OEMDTC may be compensated” |
Accessory Installation Guide
| 2022XMY WRX (with manual transmission) Auto dimming mirror | H501SVC100 |
Installation instructions
Instructions d’installatiion
Part number:
Numéro de piéce:
H501SVC100
Vehicle:
Véhicule
WRX without Eyesight
1
Disconnect battery cable from the negative battery stud.
Débranchez le câble de la batterie de la borne négative de la batterie.
2
Using a nylon trim tool, carefully remove the upper trim cover from the compass mirror.
À l’aide d’un outil de garniture en nylon, retirez soigneusement le couvercle de garniture supérieur du rétroviseur à boussole.
3
Using your fingers disengage and separate the lower mirror trim cover at the High Beam Assist sensor opening and remove the cover halves.
À l’aide de vos doigts, dégagez et séparez le couvercle de garniture inférieur du rétroviseur au niveau de l’ouverture du capteur de feux de route et retirez les deux parties du couvercle.
4
Unplug the Compass mirror.
Débranchez le rétroviseur à boussole.
5
Firmly grasp the Compass mirror and remove by rotating the base and pulling away simultaneously from the windshield mounting button.
Saisissez fermement le rétroviseur à boussole et retirez-le en tournant la base et en l’écartant simultanément du bouton de fixation du pare-brise.
6
On the new Compass mirror with HomeLink, apply protective masking tape on the High Beam Assist Sensor
Sur le nouveau rétroviseur à boussole équipé d’HomeLink, appliquez du ruban-cache protecteur sur le capteur d’assistance aux feux de route
7
1. Install the Compass mirror with HomeLink by aligning the mirror retention clips with the windshield mirror button and pressing against the mirror to fully seat the mirror.
2. Rotate the mirror until properly aligned with the reference notch shown
1. Installez le rétroviseur à boussole équipé d’HomeLink en alignant les attaches de fixation du rétroviseur avec le bouton de pare-brise du rétroviseur, puis en pressant suffisamment sur le rétroviseur pour bien le positionner.
2.Tournez le rétroviseur jusqu’à ce qu’il soit bien aligné avec la référence
8
Connect vehicle harness to Compass mirror with HomeLink.
Raccordez le faisceau du véhicule au rétroviseur à boussole équipé d’HomeLink.
9
1. Remove protective tape from High Beam Assist sensor.
2. Reinstall lower mirror trim covers and ensure all clips are fully engaged.
3. Reinstall the upper trim cover and ensure the trim cover is fully seated.
1. Retirez le ruban protecteur du capteur d’assistance aux feux de route.
2. Remettez en place les couvercles de garniture du rétroviseur et assurez-vous que toutes les attaches sont complètement fixées.
3. Remettez le couvercle de garniture supérieur en place et assurez-vous que le couvercle de garniture est bien ajusté.
10
Reconnect battery. If equipped reconnect eyelet cable. Tighten bolt to 66 in-lbs.
Rebranchez la batterie. Si elle en est équipée, rebranchez le câble de l’oeillet. Serrez les boulons à 66 po-lb.
11
Using dark cloth or cardboard, completely cover forward-looking sensor.
Avec un linge sombre ou un carton, couvrez complètement le capteur pointé vers l’avant.
12
To calibrate compass reference mirror user guide.
Pour étalonne la boussole, reportez-vous au manuel du rétroviseur.
H501SVC100
https://techinfo.subaru.com/stis/doc/accInstallGuide/H501SVC100.pdf
https://static.oemdtc.com/AccessoryInstallationGuide/H501SVC100.pdf
Loading...
Reload document 
Open in new tab
- Car Auto Dimming Rear View Mirror, Germid auto-dimming rearview mirror utilizes 3rd generation electrochromic material and dual photoelectric sensors to automatically adjust the dimming level and eliminate glare, giving you a safer and more comfortable driving experience.
- Original Factory Style & Universal Fitness, With its sleek and modern design, our mirror complements your vehicle's original factory style. Its replaceable rearview mirror bracket with double-jointed ball provides adjustable visibility and universal fit for most car models.
- High Quality Material-4.0 mm Thickness Glass, Germid mirror is made with factory OEM quality 4.0 mm glass, which meets vehicle safety standards and offers high reflectance for a clear and crisp image.
- Easy for Installation, Included with the mirror is a Door Clip Panel Trim Removal Tool, making it easy to hide the wire during installation. Moreover, our patent replaceable rearview mirror bracket allows for easy installation and replacement.
- These mirrors eliminate the glare of headlights behind you for safer nighttime
- Mirror automatically dims as it detects glare
- The brighter the glare, the more the mirror dims
- Dimensions - 12 x 6.5 x 4.75 in.
- Gentex Auto-Dimming Rear View Mirrors
- 👍【Latest Upgrade】- Upgraded uniform and glare-free LED light bars more natural and soft, bright but not dazzling, protecting your eyes.The light is even on your face,so you can see more realistically how your makeup looks. No more makeup disaster!
- 🪞【Dimmable Bicolor Led Lights】- The led car mirror has 64 white lights and 16 yellow lights , which is 50% brighter and use 60% less energy than normal bulbs. Short press the two sensor switches to switch between three light colors: white, yellow, white and yellow. Long press for dimming according to what you need. 2500-6500K color temperature is equivalent to outdoor sunlight, so your makeup will look naturally flawless.
- 👆【Touch-Sensitive Control】- The car vanity mirror has highly sensitive touch control, simply touch one of the touch switches to turn it on and off. You can switch between two colors of lights (cool white,warm yellow).Long press to adjust the brightness of the lights. The mirror also has a memory function that remembers brightness and color when you last settings.
- 🔋【Rechargeable Lithium Battery】- Built-in 2000mAh lithium battery, which can be charged through the socket, computer, mobile power.2 interface design, Comes with 10ft USB cable, long enough, free to use the car visor mirror at anywhere and anytime. It can last 8 hours if 100% brightness while always on mode.
- ❤️【Universal Size Design】- The size of car makeup mirror is 10.2(L)*5.2(W)*0.4(H) inches, which suits for most of the sun visor of cars. Ultra-thin,making it easy to install and use without taking up extra space in your car. With adjustable lanyard, easy to install and use.Vanmirr is responsible for every customer, You will get MORE RESULTS than you expect when you contact us if you are disappointed with our car light mirror.
- Auto-Dimming
- Homelink integration
- Frameless Auto Dimming Mirror
- Wiring harness is included.
- Wire cover included
- International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
- 【BUY NOTE】Check the vehicles modle and year to confirm the compatibility before purchase.
- 【Compatible With Toyota】Automatic Dimming Rearview mirror compatible with Toyota 2007-2012 Camry, 2007-2012 Solara, 2009-2013 Matrix, Corolla, 2010-2013 Prius, 2010-2012 4Runner
- 【Excellent Qualtiy Interior Mirrors】OEM Factory Production, High Quality Rear View Mirror, is constructed of premium material for long lasting durability and reliability
- 【Compatible With Lexus】Automatic Dim Interior Rear view mirror Compatible With Lexux Vehicles 2007-2012 ES350, 2006-2008 IS250, IS350, 2006-2010 GS300 GS350 GS430, 2007-2009 LS460
- 【OEM Factory Qualtiy】This automotive rear view mirror is an excellent safety feature that can help drivers better see rear of vehicle and reduce the danger posed by blind spots.
- ??High Quality Material??100% high quality material.The Car Rearview Mirror made of high quality and material.Good quality not only can provide a safer guarantee for your life,but also good materials can increase product life.
- ??After-sales Guarantee??If you have any questions about the product,or you encounter problems with your use,you can contact us directly.We will provide you with a solution in good time.No need worry about after-sale services.
- ??High Quality Material??100% high quality material.The Car Rearview Mirror made of high quality and material.Good quality not only can provide a safer guarantee for your life,but also good materials can increase product life.
- ??High Quality Material??100% high quality material.The Car Rearview Mirror made of high quality and material.Good quality not only can provide a safer guarantee for your life,but also good materials can increase product life.
- ??High Quality Material??100% high quality material.The Car Rearview Mirror made of high quality and material.Good quality not only can provide a safer guarantee for your life,but also good materials can increase product life.
- Automotive auto dimming rearview mirror
Last update on 2024-06-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
Installation instructions Instructions d’installatiion Auto dimming mirror Tetroviseur antieblouissement Tools required Outils requis Part number: Numéro de piéce: Kit contents Contenu de la trousse H501SVC100 Description: Auto dimming mirror Description: Tetroviseur antieblouissement ISSUE A PAGE 1/4 DATE 2/25/2022 SUBARU OF AMERICA A Panel removal tool Outil de dépose du panneau WRX without Eyesight Vehicle: Véhicule: 10 mm PART NUMBER H501SVC100 ISSUE A SUBARU OF AMERICA PART NUMBER H501SVC100 DATE 2/25/2022 1 Disconnect battery cable from the negative battery stud. Débranchez le câble de la batterie de la borne négative de la batterie. PAGE 2/4 10 mm 3 Using your fingers disengage and separate the lower mirror trim cover at the High Beam Assist sensor opening and remove the cover halves. À l’aide de vos doigts, dégagez et séparez le couvercle de garniture inférieur du rétroviseur au niveau de l’ouverture du capteur de feux de route et retirez les deux parties du couvercle. 2 Using a nylon trim tool, carefully remove the upper trim cover from the compass mirror. À l’aide d’un outil de garniture en nylon, retirez soigneusement le couvercle de garniture supérieur du rétroviseur à boussole. 4 Unplug the Compass mirror. Débranchez le rétroviseur à boussole. ISSUE A SUBARU OF AMERICA PART NUMBER H501SVC100 DATE 2/25/2022 1 2 PAGE 3/4 5 Firmly grasp the Compass mirror and remove by rotating the base and pulling away simultaneously from the windshield mounting button. Saisissez fermement le rétroviseur à boussole et retirez-le en tournant la base et en l’écartant simultanément du bouton de fixation du pare-brise. 6 On the new Compass mirror with HomeLink, apply protective masking tape on the High Beam Assist Sensor Sur le nouveau rétroviseur à boussole équipé d’HomeLink, appliquez du ruban-cache protecteur sur le capteur d’assistance aux feux de route 7 1. Install the Compass mirror with HomeLink by aligning the mirror retention clips with the windshield mirror button and pressing against the mirror to fully seat the mirror. 2. Rotate the mirror until properly aligned with the reference notch shown 1. Installez le rétroviseur à boussole équipé d’HomeLink en alignant les attaches de fixation du rétroviseur avec le bouton de pare-brise du rétroviseur, puis en pressant suffisamment sur le rétroviseur pour bien le positionner. 2.Tournez le rétroviseur jusqu’à ce qu’il soit bien aligné avec la référence 8 Connect vehicle harness to Compass mirror with HomeLink. Raccordez le faisceau du véhicule au rétroviseur à boussole équipé d’HomeLink. ISSUE A SUBARU OF AMERICA PART NUMBER H501SVC100 DATE 2/25/2022 PAGE 4/4 9 1. Remove protective tape from High Beam Assist sensor. 2. Reinstall lower mirror trim covers and ensure all clips are fully engaged. 3. Reinstall the upper trim cover and ensure the trim cover is fully seated. 1. Retirez le ruban protecteur du capteur d’assistance aux feux de route. 2. Remettez en place les couvercles de garniture du rétroviseur et assurez-vous que toutes les attaches sont complètement fixées. 3. Remettez le couvercle de garniture supérieur en place et assurez-vous que le couvercle de garniture est bien ajusté. 10 Reconnect battery. If equipped reconnect eyelet cable. Tighten bolt to 66 in-lbs. Rebranchez la batterie. Si elle en est équipée, rebranchez le câble de l’œillet. Serrez les boulons à 66 po-lb. 10 mm 11 12 Using dark cloth or cardboard, completely cover forward-looking sensor. Avec un linge sombre ou un carton, couvrez complètement le capteur pointé vers l’avant. To calibrate compass reference mirror user guide. Pour étalonne la boussole, reportez-vous au manuel du rétroviseur.
**************************************************************************************************************
SEOCONTENT-END
