2024 Subaru Crosstrek Owner's Manual

“This site contains affiliate links for which OEMDTC may be compensated”

Owner Manual

2024MY Crosstrek Owner’s Manual

MSA5M2407A
A1520BE-A

Table of Contents

Introduction	1
Illustrated Index	15
Seat, Seatbelt and SRS Airbags	29	Chapter 1
Keys and Doors	107	Chapter 2
Instruments and Controls	145	Chapter 3
Climate Control	261	Chapter 4
Audio	279	Chapter 5
Interior Equipment	281	Chapter 6
Starting and Operating	305	Chapter 7
Driving Tips	395	Chapter 8
In Case of Emergency	425	Chapter 9
Appearance Care	447	Chapter 10
Maintenance and Service	455	Chapter 11
Specifications	501	Chapter 12
Consumer Information and Reporting Safety Defects	515	Chapter 13
Index	533	Chapter 14

https://techinfo.subaru.com/stis/doc/ownerManual/MSA5M2407A_STIS-Opt.pdf

https://static.oemdtc.com/OwnerManual/MSA5M2407A.pdf

Taking too long?

Reload document

Open in new tab

Download [13.56 MB]

SaleBestseller No. 1

BlueDriver Bluetooth Pro OBDII Scan Tool for iPhone & Android - No Subscription Fee - OBD2 Car Scanner and Code Reader - Diagnose Check Engine, ABS, SRS, Airbag & 7000+ Issues on Vehicles 1996+

[Pro OBD2 Scanner] - BlueDriver is the easiest way to scan and understand your vehicle like a professional mechanic. Read and clear your car’s trouble codes and check engine light.
[Read & Clear All The Codes] - BlueDriver's enhanced vehicle diagnostics gives you access to information normally available only to mechanics on their OBD2 scan tools. Now you can read and clear ABS, Airbag, SRS, TPMS codes, and many more.
[Get The Right Fix & View Live Data] - Much more than a car code reader, BlueDriver is a diagnostic tool. You’ll get unlimited repair reports with possible causes and fixes, plus real-time health monitoring while you drive with the live data feature.
[Wireless & Bluetooth Enabled] - Say goodbye to wires. BlueDriver connects with Bluetooth via your phone/tablet to a sensor that plugs into your car's OBDII port. Get all of the capabilities of an expensive code reader & scan tool without any annoying wires.
[User-Friendly App and Repair Videos] - BlueDriver gives you more ways to scan and fix your vehicle. Our iOS & Android app connects you to a large database of repair videos with step-by-step directions of repairs.

Bestseller No. 2

FOXWELL Car Scanner NT604 Elite OBD2 Scanner ABS SRS Transmission, Check Engine Code Reader for Cars and Trucks, Diagnostic Scan Tool with SRS Airbag, Automotive Diagnostic Tool with Live Data

[Easy to Use--Work out of box] + [FOXWELL 2025 New Version] FOXWELL NT604 Elite scan tool is the 2025 new version from FOXWELL, which is designed for those car owners who want to figure out the cause issue before fixing the car problem via scanning the most common systems like abs srs engine and transmission.The NT604 Elite diagnostic tool comes with latest software, which can be used out of box. No need to waste time to download the software first.
[Affordable] + [Reliable Car Health Monitor] Will you be confused what happen when the warning light of abs/srs/transmission/check engine flashes? Instead of taking your cars to dealership, this foxwell scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. It will t-urn off the warning light car after the problem is fixed.👉TIPS: Airbag crash/collision data can NOT be cleared even you replace the new airbag.
[5 in 1 Diagnostic Scanner] Compared with those auto scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also it can be an abs/srs scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it. Note: doesn't support maintenance function.
[Fantastic AUTOVIN] + [No extra software fee] Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite abs srs scanner supports 60+ car makes from worldwide (America/Asia/Europe). You don’t need to pay extra software fee.
[Solid protective case KO plastic carrying bag] + [Lifetime update] Almost all same price-level obd scanner diagnostic tool only offers plastic bag to hold on the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.

SaleBestseller No. 3

BLCKTEC 430 Bluetooth OBD2 Scanner for iPhone & Android, No Subscription Fee, OBDII Car Code Reader, Diagnose Check Engine, ABS, SRS, Airbag, Supports 1996-2023 Vehicles, App only works in USA &Canada

[Transform Your Car Care Experience] - With BLCKTEC, instantly become your own professional mechanic. Effortlessly read and clear your car’s trouble codes and check engine light, ensuring your vehicle stays in top condition.
[Empower Yourself with Comprehensive Diagnostics] - Unlock the full potential of your vehicle with the BLCKTEC 430. Access detailed diagnostics previously exclusive to professional mechanics’ OBD2 scan tools, including ABS, Airbag, SRS, TPMS codes, and beyond, right at your fingertips.
[Drive with Confidence] - The BLCKTEC 430 is more than just a car code reader; it's your personal vehicle health advisor. Receive tailored repair reports with potential causes and verified solutions for your specific make and model, guiding you to the right fix every time.
[Seamless Connectivity, Ultimate Convenience] - Experience the freedom of wireless diagnostics with this portable car scanner. Easily connect via Bluetooth to our intuitive sensor and enjoy all the functionalities of high-end scan tools without the clutter of wires, directly from your smartphone or tablet. To connect the tool to the App, please DO NOT go to device's Bluetooth settings, instead, open RepairSolutions2 App and follow the instructions on the App to pair the BLCKTEC 430.
[DIY Repairs Made Easy] - Navigate car maintenance with ease using our premium app. Access a vast library of easy-to-follow repair videos, guiding you through each step of the repair process, compatible with both iOS & Android devices.

Bestseller No. 4

FOXWELL NT630 Plus OBD2 Scanner with ABS and SRS, 2025 ABS Scan Tool Bleeding Brake SRS Scanner Live Data, Car Code Reader Diagnostic Tool Bidirectional Scanner with SAS Oil Light

Pro-level ABS SRS OBD2 Scanner - Based on the NT301 FOXWELL Scanner, this car scanner takes OBD-II diagnostics to the next level by in-depth insights on reading ABS SRS Diagnostic Trouble Codes, display the Live Data: Wheel Speed Sensor, Airbag Issues, Wiring Faults, clear the ABS error codes after the car faults repaired, etc... NOTE: This code reader can only read SRS codes but CANNOT reset any Airbag crash codes. Please check the functions coverage BEFORE purchasing. NO Need to Register &Subscription.
Full-Feature ABS Diagnostics - Real-time tracking of wheel speed sensor, brake force distribution, and brake pressure with dynamic graphs for easy analysis. Effortlessly read ABS trouble codes and access freeze frame data to identify and resolve system issues. This ABS scanner diagnostic tool also monitors ABS performance during emergency braking or on slippery surfaces, providing alerts for potential problems.
Basic OBDII Scanner Functions - This obd2 scanner diagnostic tool also can Check Engine Fault Light, diagnose OBD-II modules instantly, display the Live Data with graph (engine RPM, coolant temperature, fuel trim, and sensor readings), locate bad sensors and indicate I/M readiness status before the annual inspection. Reducing the potential driving risk and keep a peak performance on the road.
Top ABS Bleed Scan Tool - After replacing the ABS pump or adding brake fluid, air can enter the ABS module, causing the pedal to feel weak or slow to return. This OBD2 scanner with ABS auto bleed will restore your brake pedal’s firmness by efficiently removing air from the ABS module. For vehicle coverage, check the FOXWELL Diagnostic Coverage List under Support on the official site. NOTE: This feature is NOT compatible with vehicles that support manual bleed.
User-Friendly & Budget-Friendly - Enjoy software updates without subscription for newer vehicle models(Any more issues about update, please let us know）. This car code reader comes with a sturdy case for easy carrying. The code reader for cars will also save diagnostic data to avoid unnecessary diagnostic costs when you must to find the professional mechanic to fix the car faults instead of addressing them by yourself.

SaleBestseller No. 5

ANCEL AD610 Pro OBD2 Scanner - ABS SRS Code Reader, Check Engine Light Diagnostic Tool with ABS Bleeding, AutoVIN, Real-Time Data, Full OBD2 Functions, SAS/Oil/EPB Reset

[ABS Diagnosis] - Quickly identify and resolve ABS-related issues, including sensor faults (such as wheel speed sensors), wiring problems (faulty circuits or connectors within the ABS system), or ABS pump failures (malfunctions in the ECU controlling the ABS). Ensure proper system operation, restore optimal braking performance, and clear any warning lights.
[SRS Diagnosis] - Quickly detect the airbag ECU itself, airbag sensor failure, airbag system plug disconnection or poor contact, seat belt sensor failure, or system error, etc, to ensure that the SRS (Supplemental Restraint system) is working properly. After repair, reset the system to clear the warning light and restore full safety performance. NOTE: It cannot reset Airbag crash or transmission codes.
[Full OBD2 Function] - Read and clear trouble codes for all OBD2 systems, including show real-time data, freeze frame data, I/M Readiness, DTC lookup, test results for o-xygen sensor, On-board monitor test, request vehicle information, component test, modules present and e-vap test. Allowing you to quickly identify and troubleshoot vehicle issues.
[AutoVIN Technology] - It simplifies diagnostics by automatically identifying the vehicle’s model and configuration, eliminating the need for manual input, and ensures accurate diagnostics by applying the correct data and algorithms, reducing errors caused by manual entry. Improves efficiency and streamlines the diagnostic process.
[ABS Auto Bleeding] - Helps bleed your vehicle's Anti-lock Braking System (ABS), removing air from the brake lines to ensure optimal brake performance. It helps prevent brake issues such as spongy pedals, inconsistent braking, and reduced stopping power, and enhances vehicle safety by ensuring the ABS system is working properly, especially during critical driving situations. NOTE: It’s not compatible with vehicles that only support manual bleeding.

Bestseller No. 6

OBD2 Scanner TOPDON AD500, Oil SAS Throttle TPMS BMS EPB Reset, Engine ABS SRS Transmission, Diagnostic Scan Tool, AutoVIN, Car Check Engine Code Reader with Battery Test, Lifetime Wi-Fi Free Update

[Brand-New ArtiDiag500] We've got everything you're looking for! Forget basic OBD2 scanners; TOPDON's ArtiDiag500 car scanner offers more. The all-new ArtiDiag500 not only includes full OBD2 functions and 4-system diagnostics but also provides DIYers with 6 maintenance services. The brand-new, cost effective AD500 is back in full swing!
[4-System Diagnostics] DIY enthusiasts, take notice! Will these 4-system diagnostics be the treasure you've been seeking? The ArtiDiag500 code reader offers in-depth testing for the engine, transmission, ABS, and SRS systems, reading fault codes and data streams. It also visualizes real-time data in chart form, simplifying complex data for storage and future playback, aiding DIY users in problem detection.
[6 Reset Functions] Hey, hang tight for a moment. With these 6 reset functions, the ArtiDiag500 has got you covered. It offers throttle adaptation along with reset capabilities for Oil, SAS, TPMS, BMS, and EPB. Seamlessly aligning the throttle, battery, tires, and brake pads with your vehicle, it also adjusts the steering angle and turns off the oil light. Looking to restore your car to its original condition? Look no further than the ArtiDiag500.
[Multiple Functions] The Smart AutoVIN of this TOPDON OBD2 scanner keeps track of your manual selections for vehicle make, model, and year and directs you to the suitable diagnostics. Max 4 Live Data streams integrated for much easier data processing. Diagnostic feedback online with this diagnostic tool to help you get tough repair operations well-completed. Real-time car battery voltage monitoring identifies probable vehicle defects.
[Global Support] Rest assured about compatibility with your vehicle and language – ArtiDiag500 currently supports 67+ car brands, 10,000+ models, covering most vehicles worldwide, and is available in 12 languages. Whether it's for your car or preferred language, there's an ideal choice for you. Plus, it's fully compatible with Android 11 for smoother use.

Bestseller No. 7

XTOOL D5S OBD2 Scanner - 2025 Code Reader for Cars & Trucks with 15 Reset Functions, Crank Sensor Relearn, FCA AutoAuth, CAN FD for GM, Engine ABS SRS Transmission Car Diagnostic Tool

Comprehensive OBD2 Scanner with 15 Resets: The XTOOL D5S car code reader and vehicle reset tool provides an advanced diagnostic solution with 15 high demand reset functions, including Electronic Parking Brake Reset (EPB), SAS, BMS Reset, Throttle Body Relearn, TPMS Reset, ABS Bleeding, Injector Coding, Gearbox Match, Suspension Adjustment, Headlight, Window Initialization, Crank Sensor Relearn and more. Equipped with CAN FD Protocol and FAC AutoAuth, the D5S obdii scanner diagnostic tool ensures compatibility with a broad range of modern vehicles, allowing users to address common maintenance needs quickly.
4 Main System Car Diagnostic Scanner & Full OBD2 Diagnostics: The XTOOL D5S vehicle code reader is ideal for home mechanics, DIYers, and professionals, providing access to Transmission/Engine/ABS/SRS to read dtcs, and live data can be displayed in text or up to 4 pid data graphs, along with full OBD2 diagnostics to check the engine light on, other obd2 issues and routine maintenance. This scan tool ensures you can keep your vehicles in top condition, avoiding costly repairs or unexpected breakdowns. NOTE: Some vehicles display three systems after connection because the transmission and engine of some vehicles are integrated into one
One-Tap W!Fi Updates + No Software Fees: Enjoy a 5.45” high-resolution touchscreen (1440x720) that’s easy to read, even in low light. Free lifetime software updates over Wi-Fi keep your D5S OBD2 Scanner Diagnostic Tool updated with the latest features—no hidden fees. Ample 32GB storage plus expandable memory ensures room for all your diagnostic data, while durable silicone grips provide comfortable, secure handling. This makes D5S a cost-effective, long-term investment for continuous diagnostic support, a reli~able automotive scanner diagnostic tool for your family
Wide Compatibility Across 90+ Vehicle Brands: The XTOOL D5S Scanner for cars and trucks works with OBDII-equipped vehicles built after 1996, covering over 90 vehicle brands, including 12V diesel and SUVs, minivans, and light-duty trucks. It supports most of protocols include CAN FD for broad compatibility. For vehicle-specific compatibility, send us your vehicle information to check the compatibility before purchase
Super Clear Navigation Display: The XTOOL D5S car scanner enhances your diagnostic workflow with a super clear navigation display, designed for convenience and speed. TOP Capability include a Voltage Display for real-time monitoring of your vehicle’s electrical system, a “My Vehicle” Menu for adding and managing vehicle information, and Quick Button Interfaces for both Auto Scan and OBD2 Diagnostics, ensuring you can quickly access the menu you need. These features streamline the diagnostic process, allowing you to focus on what matters most—Efficient vehicle maintenance

Bestseller No. 8

FOXWELL OBD2 Scanner NT716 Bidirectional Scan Tool, ABS SRS Transmission Engine, 9 Resets, Code Reader, Car Scanner with ABS Bleeding/SAS/Oil Light/EPB/BMS/DPF/Throttle Relearn/Injector Coding/TPMS

2025 FOXWELL Scanner NT716: New Bidirectional Scan Tool – Get active test capabilities for ABS, Airbag, Transmission, and Engine systems, easily perform various tests such as injectors, Cooling Fan, Fuel Pump, etc.The price of $ 200+ enjoys a $ 300-500 code reader service! With the NT716 Scanner Diagnostic Tool, You only need to plug in the device to accurately obtain real -time data information. To understand whether your car's system actuator is normal, prevent danger in advance, and drive with confidence. 👉P.S. The active test function needs to be upgraded before it can be used.
4-System Car Scanner for ABS, Airbag, Transmission, and Engine – Easily read error codes and ECU information, view 4-in-1 live data, and save or download data for later reference. The built-in DTC library explains fault codes clearly, and once issues are fixed, you can clear codes and turn off warning lights with just one tap. FOXWELL NT716 Code Scanner empowers you to handle most diagnostics on your own, saving you time and money instead of relying on an elusive mechanic.
9 Reset Functions – Unlike other obd2 scanner diagnostic tools in this price range that offer only 5–7 resets, FOXWELL NT716 scan tool supports 9 essential reset functions, including ABS Bleeding, SAS, Oil Light, EPB, BMS, DPF, Throttle Relearn, Injector Coding, and TPMS. You can monitor the running status of various systems of the car by live data flow, identify potential problems, reset system data, and extinguish the flashing oil lamp fault light! ❗Notice:This product does NOT have special functions for car k-ey p-rogramming.
Full OBD2 Scanner with Plug-and-Play – Enjoy comprehensive OBDii functions, including AutoVIN for automatic vehicle info recognition, one-click I/M Readiness for emissions checks, real-time data, and freeze frame capture… Scanner FOXWELL NT716 makes it easy to prepare for annual inspections, helping you stay road-ready with confidence each year.
5.5" HD Touchscreen Tablet Diagnostic Scanner– Get rid of the confusion caused by the 2.8" scanner with multi - button operation; Built -in 4000mAh battery, the new version of the battery life is greatly enhanced; No subscription fee, no additional charges, share reports anytime, one - click free WiFi upgrade; Android 9.0 system, 24+language , support 100+ car brands from 1996 to 2025.

Bestseller No. 9

Autel AutoLink AL619 Scanner, 2025 ABS SRS Airbag Warning Light Diagnostic Scan Tool, Up of AL519 ML519 ML619, 10 OBDII Test Modes, DTCs Lookup, Live Data, Turn Off Check Engine Light OBD2 Code Reader

🎉【2025 Upgraded Ver. of AL519/ ML519/ ML619】Autel develops the brand-new AutoLink AL619 as the advanced ver. of Autel ML519, AL519, AL319, MS309. This AL619 OBD2 scanner can scan ABS & SRS systems, and support 10 Modes of OBD II Diagnostics Function on Worldwide Vehicles to read, erase codes and turn off the MIL, ABS, SRS warning lights so that you can better maintain your car when related malfunctions occur and make your vehicle ready for the annual test.🚦📢Kindly note: AL619 only supports 2015 or pre-2015 cars. And services are not universal, please send us your car VIN# to check the compatibility before ordering.📩AutelStoreOnline @ outlook . com📩.
🎉【Accurate ABS/ SRS Diagnostics Functions】The ABS/ SRS diagnostic function is used to retrieve and clear codes from the ABS/ SRS systems. It can read and clear DTCs, show definitions of each code, display live data of multiple sensors in the graph to locate fault causes, and assist home mechanics to do the proper repair and clear ABS & Airbag warning lights. Diagnoses ABS/ SRS system codes on most 1996 and newer major vehicle models. Please email 📩 AutelStoreOnline @ outlook . com 📩 for help.
🎉【All 10 Modes of OBD II Diagnostics Function】The OBD II Diagnostics function is a fast-access option that allows you to carry out a quick test on the engine system of OBD II vehicles. Read Codes, Erase Codes, Live Data, Freeze Frame, Retrieving I/M Readiness Status, O2 Monitor Test, On-Board Monitor Test, DTC Lookup, Component Test, Viewing Vehicle Information, Modules Present.
🎉【Live Data and Freeze Frame Data】With Live Data functions, Autel AL619 OBD2 diagnostic code reader allows you to view the live PID (Parameter Identification Data) of the vehicle's computer module(s) in text, graph to check the status of various sensors. And Freeze Frame Data enables you to view the vehicle's operating parameters at the moment a DTC is detected. These information will aid the technician by allowing the parameters to be duplicated for diagnostic and repair purposes.
🎉【DTC Lookup Feature】Besides showing you the code’s definition while you are reading the diagnostic trouble codes, AL619 features comparably user-friendly DTC Lookup Function which enables you to retrieve the definitions of any error codes from the large database of AL619, saving you from the hassle of wasting time searching definition of every code via Google.

SaleBestseller No. 10

2025 FOXWELL NT614 Elite OBD2 Scanner with 5 Resets ABS Bleeding/SAS Calibration/Oil/EPB/Throttle, Upgrade of NT604 Code Reader Scan Tools, ABS SRS Engine Transmission Battery Test Car Scanner

【UPGRADE OF NT604-POWERFUL 5 RESETS】Wanna to do maintenance service for your car however the basic 4 system scanner tool can't do it? Then FOXWELL NT614 Elite-the upgraded version of nt604, was born for providing you with 5 special functions-ABS Bleeding/Oil Reset/SAS Calibration/EPB Reset/Throttle Reset. These functions are enough for your daily needs. No need to buy those 300-600 dollors obd2 scanner. Saving your unnecessary repair fee with FOXWELL nt614 car scanner diagnostic tool!
【ENGINE/ABS/SRS/TRANSMISSION CODE READER】Don't know what's wrong with your car when the warning light of ABS, transmission, SRS, Engine flashes? NT614 Elite obd2 scanner can pinpoint the problem components. It boasts many functions of engine, abs, srs and transmission such as read & erase fault codes and grapgh live data like engine temp, wheel speed sensor, read transmission temperature, etc. Compared with car repairs, using foxwell nt614 elite is more convenient and a-ffordable.
【Best Bang For Your Buck!-FOXWELL NT614 Elite】1. 2025 New software-faster than old one. 2. One click lifetime WIFI f-ree update, no need to use the annoying Micro SD card. 3. New Update-No need to register on the FOXWELL website before use, more convenient! 4. More intuitive viewing with new interface, you can find I/M, Battery Test, DTC Lookup directly.
【ABS BLEEDING OBD SCANNER】Do you always feel the brake pedal was slowly sinking to floor or it's loose after doing a complete front & rear brake job? And then you need to take more time than normal to stop your car, which is very dangerous. That's because when you open the brake system to replace components, air gets inside. To get a firm brake pedal, the air need to be removed by bleeding the brakes. NT614 Elite odb2 scanner can do ABS BLEEDING perfectly for your cars.
【SMART AUTOVIN & LIFETIME F-REE WIFI UPDATE & PERFECT GIFT CHOICE】With the fantastic AUTOVIN function, this nt614 scan tool can get your VIN and vehicle info rapidly. No need to spend much time in finding your VIN and input it one by one. Also, the lifetime f-ree wifi update is provided for more vehicle coverage, bug fixes, newly added parameters. SAVE AT LEAST 1000+ PER YEAR. And this automotive scanner is a best gift for your Dad, Husband, Boyfriend and Handy Men.

[comment type=”hidden”]

FFoorewroerdword SFWAA Congratulations on choosing a SUBARU vehicle. This Owner’s Manual has all the information necessary to keep your SUBARU in excellent condition and to properly maintain the emission control system for minimizing emission pollutants. We urge you to read this manual carefully so that you may understand your vehicle and its operation. For information not found in this Owner’s Manual, such as details concerning repairs or adjustments, please contact the SUBARU dealer from whom you purchased your SUBARU or the nearest SUBARU dealer. The information, specifications and illustrations found in this manual are those in effect at the time of printing. SUBARU CORPORATION reserves the right to change specifications and designs at any time without prior notice and without incurring any obligation to make the same or similar changes on vehicles previously sold. This Owner’s Manual applies to all models and covers all equipment, including factory installed options. Some explanations, therefore may be for equipment not installed in your vehicle. Please leave this manual in the vehicle at the time of resale. The next owner will need the information found herein. SUBARU CORPORATION, TOKYO, JAPAN “SUBARU” and the six-star cluster design are registered trademarks of SUBARU CORPORATION. *C Copyright 2023 SUBARU CORPORATION This manual describes the following vehicle type. Table of Contents Keys and Doors 107 Chapter 2 Instruments and Controls. 145 Chapter 3 Climate Control . 261 Audio . 279 Chapter 5 Interior Equipment . 281 Chapter 6 Starting and Operating 305 Chapter 7 Driving Tips . 395 Chapter 8 In Case of Emergency . 425 Chapter 9 Appearance Care 447 Chapter 10 Maintenance and Service . 455 Chapter 11 Specifications 501 Chapter 12 Consumer Information and Reporting Safety Defects 515 Chapter 13 Index 533 Chapter 14 Chapter 4 Illustrated Index .15 Seat, Seatbelt and SRS Airbags 29 Chapter 1 Introduction 1 * Warranties s.in.t. 2 Warranties for U.S.A. . 2 Warranties for Canada . 2 Warranties except for U.S.A. and Canada . 2 * How to Use This Owner’s Manual . 2 Using Your Owner’s Manual . 2 Safety Warnings 3 Safety Symbol . 4 Abbreviation List . 4 * Vehicle Symbols . 5 * Safety Precautions When Driving . 5 Seatbelt and SRS Airbag 5 Child Safety. 5 Engine Exhaust Gas (Carbon Monoxide) 6 Drinking and Driving 7 Drugs and Driving . 7 Driving When Tired or Sleepy 7 Modification of Your Vehicle 8 Use of Cell Phones/Texting and Driving . 8 Driving Vehicles Equipped with Navigation System . 8 Driving with Pets. 8 Tire Pressures. 9 On-Road and Off-Road Driving 9 Attaching Accessories 9 Vehicle Operation.10 * General Information 11 California Perchlorate Advisory 11 Noise from under the Vehicle . 11 Vehicle Data Recording 11 Event Data Recorder 12 Introduction Introduction Warranties s00aa & Warranties for U.S.A. s00aa01 SUBARU vehicles distributed by Subaru of America, Inc. and sold at retail by an authorized SUBARU dealer in the United States come with the following warranties: . SUBARU Limited Warranties . Federal Emission Control Systems Warranties . California Emissions Control Systems Warranties All warranty information, including applicability, details of coverage and exclusions, is in the “Warranty and Maintenance Booklet”. Read these warranties carefully. & Warranties for Canada s00aa05 SUBARU vehicles distributed by Subaru Canada, Inc. and sold at retail by an authorized SUBARU dealer in Canada come with the following warranties: . SUBARU Limited Warranty . Emission Control System Warranty All warranty information, including applicability, details of coverage and exclusions, is in the “Warranty and Service Booklet”. Read these warranties carefully. & Warranties except for U.S.A. and Canada s00aa06 All warranty information, including details of coverage and exclusions, is in the “Warranty and Maintenance Booklet”. Read these warranties carefully. How to Use This Owner’s Manual s00ab & Using Your Owner’s Manual s00ab01 Before you operate your vehicle, carefully read this manual. To protect yourself and extend the service life of your vehicle, follow the instructions in this manual. Failure to observe these instructions may result in serious injury and damage to your vehicle. This manual is composed of fourteen chapters. Each chapter begins with a brief table of contents, so you can usually tell at a glance if that chapter contains the information you want. Introduction This chapter informs you general information before driving. Illustrated Index This chapter informs you about the vehicle layout with illustrations. Chapter 1: Seat, Seatbelt and SRS Airbags This chapter informs you how to use the seat and seatbelt and contains precautions for the SRS airbags. Chapter 2: Keys and Doors This chapter informs you how to operate the keys, locks and windows. 2 Warranties Chapter 3: Instruments and Controls This chapter informs you about the operation of instrument panel indicators and how to use the instruments and other switches. Chapter 4: Climate Control This chapter informs you how to operate the climate control. Chapter 5: Audio This chapter informs you about your audio system. Chapter 6: Interior Equipment This chapter informs you how to operate interior equipment. Chapter 7: Starting and Operating This chapter informs you how to start and operate your SUBARU. Chapter 8: Driving Tips This chapter informs you how to drive your SUBARU in various conditions and explains some safety tips on driving. Chapter 9: In Case of Emergency This chapter informs you what to do if you have a problem, such as a flat tire or engine overheating. Chapter 10: Appearance Care This chapter informs you how to keep your SUBARU looking good. Chapter 11: Maintenance and Service This chapter informs you when you need to take your SUBARU to the dealer for scheduled maintenance and informs you how to keep your SUBARU running properly. Chapter 12: Specifications This chapter informs you about the dimensions and capacities of your SUBARU. Chapter 13: Consumer Information and Reporting Safety Defects This chapter informs you about Tire information, Uniform tire quality grading standards and Reporting safety defects. Chapter 14: Index This is an alphabetical listing of all that’s in this manual. You can use it to quickly find something you want to read. For EyeSight system: For details about the EyeSight system, refer to the Owner’s Manual supplement for the EyeSight system. Depending on specifications, the vehicle shown in the illustrations may differ from your vehicle in terms of equipment. & Safety Warnings s00ab02 You will find a number of WARNINGs, CAUTIONs and NOTEs in this manual. These safety warnings alert you to potential hazards that could result in injury to you or others. Please read these safety warnings as well as all other portions of this manual carefully in order to gain a better understanding of how to use your SUBARU vehicle safely. WARNING A WARNING indicates a situation in which serious injury or death could result if the warning is ignored. CAUTION A CAUTION indicates a situation in which injury or damage to your vehicle, or both, could result if the caution is ignored. NOTE A NOTE gives information or suggestions how to make better use of your vehicle. – CONTINUED – How to Use This Owner’s Manual 3 Introduction & Safety Symbol s00ab03 You will find a circle with a slash through it in this manual. This symbol means “Do not”, “Do not do this”, or “Do not let this happen”, depending upon the context. & Abbreviation List s00ab04 You may find several abbreviations in this manual. The meanings of the abbreviations are shown in the following list. Abbreviation Meaning ABS Anti-lock brake system A/C Air conditioner AKI Anti knock index ALR Automatic locking retractor ALR/ELR Automatic locking retractor/ Emergency locking retractor AVH Auto Vehicle Hold AWD All-wheel drive BSD Blind Spot Detection CVT Continuously variable transmission DRL Daytime running light EBD Electronic brake force distribution ELR Emergency locking retractor GAW Gross axle weight GAWR Gross axle weight rating GPS Global positioning system GVW Gross vehicle weight GVWR Gross vehicle weight rating LATCH Lower anchors and tethers for children Abbreviation Meaning LCA Lane Change Assist LED Light emitting diode MIL Malfunction indicator light MMT Methylcyclopentadienyl manganese tricarbonyl OBD On-board diagnostics RAB Reverse Automatic Braking system RCTA Rear Cross Traffic Alert RON Research octane number SI-DRIVE SUBARU Intelligent Drive SRH Steering Responsive Headlight SRS Supplemental restraint system TIN Tire identification number TPMS Tire pressure monitoring system 4 How to Use This Owner’s Manual Vehicle Symbols s00ac There are some of the symbols you may see on your vehicle. For warning and indicator lights, refer to “Warning and Indicator Lights” P26. Mark Name WARNING CAUTION Read these instructions carefully Wear eye protection Battery fluid contains sulfuric acid Keep children away Keep flames away Prevent explosions Safety Precautions When Driving s00ad & Seatbelt and SRS Airbag s00ad01 WARNING . All persons in the vehicle must fasten their seatbelts BEFORE the vehicle starts to move. Otherwise, the possibility of serious injury becomes greater in the event of a sudden stop or accident. . To obtain maximum protection in the event of an accident, the driver and all passengers must always wear seatbelts when in the vehicle. The SRS (Supplemental Restraint System) airbag does not replace the safety benefits of wearing a seatbelt. Used in combination with the seatbelts, the SRS airbag offers vehicle occupants the best possible protection in the event of a serious accident. Not wearing a seatbelt increases the chance of severe injury or death in a crash even when the vehicle has the SRS airbag. . The SRS airbags deploy with considerable speed and force. Occupants who are not seated in the proper upright position when the SRS airbag deploys could suffer very serious injuries. Because the SRS airbag needs enough space for deployment, the driver should always sit upright and well back in the seat as far from the steering wheel as practical while still maintaining full vehicle control and the front passenger should move the seat as far back as possible and sit upright and well back in the seat. For instructions and precautions, carefully read the following sections. . For the seatbelt system, refer to “Seatbelts” P41. . For the SRS airbag system, refer to “SRS Airbag (Supplemental Restraint System Airbag)” P74. & Child Safety s00ad02 WARNING . Never hold a child on your lap or in your arms while the vehicle is moving. The passenger cannot – CONTINUED – Vehicle Symbols 5 Introduction protect the child from injury in a collision, because the child will be caught between the passenger and objects inside the vehicle. . NEVER INSTALL A REARWARDFACING CHILD RESTRAINT SYSTEM ON THE FRONT PASSENGER’S SEAT. DOING SO RISKS SERIOUS INJURY OR DEATH TO THE CHILD BY PLACING THE CHILD’S HEAD TOO CLOSE TO THE SRS AIRBAG. . SUBARU strongly recommends that ALL infants and children (including those in child restraint systems) sit in the REAR seat properly restrained in a child restraint system or in a seatbelt, whichever is appropriate for the child’s age, height and weight. The SRS airbag deploys with considerable speed and force and can injure or even kill children, especially if they are not restrained or improperly restrained. Because children are lighter and weaker than adults, their risk of being injured from deployment is greater. According to accident statistics, children are safer when properly restrained in the rear seating positions than in the front seating positions. For instructions and precautions concerning child restraint systems, refer to “Child Restraint Systems” P56. . Always turn the child safety locks to the “LOCK” position when children sit in the rear seat. Serious injury could result if a child accidentally opens the door and falls out. Refer to “Child Safety Locks” P136. . Always lock the passengers’ windows using the lock switch when children are riding in the vehicle. Failure to follow this procedure could result in injury to a child operating the power window. Refer to “Windows” P136. . Never leave unattended children, adults or animals in the vehicle. They could accidentally injure themselves or others through inadvertent operation of the vehicle. Also, on hot or sunny days, temperature in a closed vehicle could quickly become high enough to cause severe or possibly fatal injuries to them. . When leaving the vehicle, close all windows and lock all doors. For instructions and precautions, carefully read the following sections. . For the seatbelt system, refer to “Seatbelts” P41. . For the child restraint system, refer to “Child Restraint Systems” P56. . For the SRS airbag system, refer to “SRS Airbag (Supplemental Restraint System Airbag)” P74. & Engine Exhaust Gas (Carbon Monoxide) s00ad03 WARNING . Never inhale engine exhaust gas. Engine exhaust gas contains carbon monoxide, a colorless and odorless gas which is dangerous, or even lethal, if inhaled. . Always properly maintain the engine exhaust system to prevent engine exhaust gas from entering the vehicle. . Never run the engine in a closed space, such as a garage, except for the brief time needed to drive the vehicle in or out of it. 6 Safety Precautions When Driving . Avoid remaining in a parked vehicle for a long time while the engine is running. If that is unavoidable, then use the ventilation fan to force fresh air into the vehicle. . Always keep the front ventilator inlet grille free from snow, leaves or other obstructions to ensure that the ventilation system always works properly. . If at any time you suspect that exhaust fumes are entering the vehicle, have the problem checked and corrected as soon as possible. If you must drive under these conditions, drive only with all windows fully open. . Keep the rear gate closed while driving to prevent exhaust gas from entering the vehicle. & Drinking and Driving s00ad04 WARNING Drinking and then driving is very dangerous. Alcohol in the bloodstream delays your reaction and impairs your perception, judgment and attentiveness. If you drive after drinking – even if you drink just a little – it will increase the risk of being involved in a serious or fatal accident, injuring or killing yourself, your passengers and others. In addition, if you are injured in the accident, alcohol may increase the severity of that injury. Please don’t drink and drive. Drunken driving is one of the most frequent causes of accidents. Since alcohol affects all people differently, you may have consumed too much alcohol to drive safely even if the level of alcohol in your blood is below the legal limit. The safest thing you can do is never drink and drive. However if you have no choice but to drive, stop drinking and sober up completely before getting behind the wheel. & Drugs and Driving s00ad05 WARNING There are some drugs (over the counter and prescription) that can delay your reaction time and impair your perception, judgment and attentiveness. If you drive after taking them, it may increase your, your passengers’ and other persons’ risk of being involved in a serious or fatal accident. If you are taking any drugs, check with your doctor or pharmacist or read the literature that accompanies the medication to determine if the drug you are taking can impair your driving ability. Do not drive after taking any medications that can make you drowsy or otherwise affect your ability to safely operate a motor vehicle. If you have a medical condition that requires you to take drugs, please consult with your doctor. Never drive if you are under the influence of any illicit mind-altering drugs. For your own health and well-being, we urge you not to take illegal drugs in the first place and to seek treatment if you are addicted to those drugs. & Driving When Tired or Sleepy s00ad06 WARNING When you are tired or sleepy, your reaction will be delayed and your perception, judgment and attentiveness will be impaired. If you drive when tired or sleepy, your, your passengers’ and other persons’ chances of being involved in a – CONTINUED – Safety Precautions When Driving 7 Introduction serious accident may increase. Please do not continue to drive but instead find a safe place to rest if you are tired or sleepy. On long trips, you should make periodic rest stops to refresh yourself before continuing on your journey. When possible, you should share the driving with others. & Modification of Your Vehicle s00ad07 WARNING Do not remove the genuine SUBARU navigation and/or audio system. Doing so could cause the following functions to be inoperable. . Combination meter display (color LCD) . Rear view image and help lines . Vehicle settings . Climate control . Clock CAUTION Your vehicle should not be modified other than with genuine SUBARU parts and accessories. Other types of modifications could affect its performance, safety or durability, and may even violate governmental regulations. In addition, damage or performance problems resulting from modification may not be covered under warranties. & Use of Cell Phones/Texting and Driving s00ad16 CAUTION Do not talk on a cell phone or text while driving; it may distract your attention from driving and lead to an accident. If you use a cell phone to talk or text, first pull off the road and park in a safe place. In some States/ Provinces, it may be lawful to talk on a phone while driving, but only if the phone is hands-free. & Driving Vehicles Equipped with Navigation System s00ad09 WARNING Do not allow the monitor to distract your attention from driving. Also, do not operate the controls of the navigation system while driving. The loss of attention to driving could lead to an accident. If you wish to operate the controls of the navigation system, first take the vehicle off the road and stop it in a safe location. & Driving with Pets s00ad10 Unrestrained pets can interfere with your driving and distract your attention from driving. In a collision or sudden stop, unrestrained pets or cages can be thrown around inside the vehicle and hurt you or your passengers. Besides, the pets can be hurt under these situations. It is also for their own safety that pets should be properly restrained in your vehicle. Restrain a pet with a special traveling harness which can be secured to the rear seat with a seatbelt or use a pet carrier which can be secured to the rear seat by routing a seatbelt through the carrier’s handle. Never restrain pets or pet carriers in the front passenger’s seat. For further information, consult your veterinarian, local animal protection society or pet shop. 8 Safety Precautions When Driving & Tire Pressures s00ad11 Check and, if necessary, adjust the pressure of each tire and the spare (if equipped) at least once a month and before any long journey. Check the tire pressure when the tires are cold. Use a pressure gauge to adjust the tire pressures to the values shown on the tire inflation pressure label. For detailed information, refer to “Tires and Wheels” P474. WARNING Driving at high speeds with excessively low tire pressures can cause the tires to deform severely and to rapidly become hot. A sharp increase in temperature could cause tread separation, and destruction of the tires. The resulting loss of vehicle control could lead to an accident. & On-Road and Off-Road Driving s00ad13 This vehicle is classified as a utility vehicle. Utility vehicles have a significantly higher rollover rate than other types of vehicles. Your vehicle has a higher ground clearance and higher center of gravity, making it more likely to roll over than ordinary passenger cars. It also handles and maneuvers differently from other passenger cars. For this reason, please read carefully the following section and follow the instructions and precautions in order to prevent serious injury or death due to loss of control, rollover and other accidents. Refer to “On-Road and Off-Road Driving” P400. & Attaching Accessories s00ad15 WARNING . Do not attach any accessories, labels or stickers (other than properly placed inspection stickers) to the windshield. Such items may obstruct your view. . If it is necessary to attach an accessory (such as an electronic toll collection (ETC) device or security pass) to the windshield, consult your SUBARU dealer for details on the proper location. . Do not connect any unauthorized accessories or devices to the data link connector (OBDII port). This connector should be used only with compatible diagnostic devices for inspection and maintenance by an authorized service technician using authorized service tools. Connecting unauthorized devices, such as a driverbehavior tracking device, may adversely affect vehicle systems, including safety systems, or allow others to access information stored in your vehicle. The use of unauthorized devices may also cause unexpected malfunctions, such as a drained battery, or may damage vehicle systems. The manufacturer’s warranty will not cover any part that malfunctions, fails, or is damaged due to the use of an unauthorized device with the data link connector. – CONTINUED – Safety Precautions When Driving 9 Introduction & Vehicle Operation s00ad18 ! Before leaving vehicle unattended s00ad1801 CAUTION Always lock your vehicle and carry your access key fob with you. There is a risk for vehicle theft or unauthorized persons tampering with the vehicle or installing malicious electronic devices. ! Key number plate storage s00ad1802 NOTE . The key number is required when repairing the vehicle or making a spare access key fob. If you lose the plate with these numbers stamped on it, you will not be able to make a spare access key fob. To prevent it from being stolen, do not leave it in the vehicle and store it in a safe place. Refer to “Keyless Access with Push-Button Start System” P108. . If you lose your key, we recommend that you delete the lost access key fob registration to prevent theft. Only a SUBARU dealer can delete key fob registration. We recommend that you consult your SUBARU dealer. Refer to “Key Replacement” P123. ! Vehicle modifications s00ad1803 WARNING . Do not install parts, make custom adjustments or perform wiring or other operations that are not suitable for the vehicle. . Do not connect accessories to the vehicle wiring or connectors unless they are genuine SUBARU products. SUBARU’s vehicle warranty does not cover any malfunctions resulting from connecting the vehicle to products other than those specified. . It may be illegal to modify the vehicle by installing parts other than those reported by SUBARU to the Ministry of Land, Infrastructure, Transport, and Tourism. Consult your SUBARU dealer about the kinds of parts (tires, wheels, mufflers, etc.) you can legally install on your vehicle. ! Device installation s00ad1804 WARNING Connecting devices that are not intended to be used in the vehicle or in a particular connector can adversely affect the vehicle system or cause the auxiliary battery to discharge. It may also cause personal information leaks or unauthorized remote operation of vehicle features, resulting in unforeseen complications. Any complication caused by connecting a device other than one intended to be used in the vehicle is not covered by the manufacturer’s warranty. SUBARU also bears no responsibility for any such complication. . The vehicle trouble diagnosis connector should only be used to connect the vehicle data link connector (OBDII) for inspection and maintenance purposes. . Use the USB port only for data communication with your vehicle and for device charging. 10 Safety Precautions When Driving ! Suspicious device handling s00ad1805 WARNING If you find an unrecognized device on your vehicle, consult your SUBARU dealer immediately. Any problem or safety risk due to the connection of an unauthorized device is not covered by the manufacturer’s warranty. SUBARU also bears no responsibility for any such cause. ! Deleting personal information from vehicle s00ad1806 CAUTION When transferring ownership of your vehicle, delete the personal information registered in the vehicle by performing a Factory Data Reset. For details about the Factory Data Reset, refer to the Owner’s Manual supplement for the audio and navigation system. Note that certain personal information inputted in the Head Unit and the phone number of any paired device will remain in vehicle data logs even after the Factory Data Reset. These data logs are strictly for quality assurance purposes and not viewable by any subsequent purchaser. To have those logs deleted permanently from the vehicle, please contact your SUBARU dealer. General Information s00ak & California Perchlorate Advisory s00ak03 Certain vehicle components, such as airbag modules, seatbelt pretensioners and keyless entry transmitter batteries, may contain perchlorate material. Special handling may apply for service or vehicle end of life disposal. See www.dtsc.ca.gov/ hazardouswaste/perchlorate. & Noise from under the Vehicle s00ak01 NOTE You may hear a noise from under the vehicle approximately 5 to 10 hours after the ignition switch is turned to the “LOCK”/“OFF” position. However, this does not indicate a malfunction. This noise is caused by the operation of the fuel evaporation leakage checking system and the operation is normal. The noise will stop after approximately 15 minutes. & Vehicle Data Recording s00ak08 The vehicle is equipped with sophisticated computers that will record certain data, such as: . Vehicle speed – CONTINUED – General Information 11 Introduction . Engine speed . Engine control information . Shift state information . Driving information, etc. ! Data usage s00ak0801 SUBARU may use the data recorded in this computer to diagnose malfunctions, conduct research and development, and improve quality. SUBARU will not disclose the recorded data to a third party except: . With the consent of the vehicle owner or with the consent of the lessee if the vehicle is leased . In response to an official request by the police, a court of law or a government agency . For use by SUBARU in a lawsuit . For research purposes where the data is not tied to a specific vehicle or vehicle owner & Event Data Recorder s00ak04 This vehicle is equipped with an event data recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an air bag deployment or hitting a road obstacle, data that will assist in understanding how a vehicle’s systems performed. The EDR is designed to record data related to vehicle dynamics and safety systems for a short period of time, typically 30 seconds or less. The EDR in this vehicle is designed to record such data as: . How various systems in your vehicle were operating; . Whether or not the driver and passenger safety belts were buckled/fastened; . How far (if at all) the driver was depressing the accelerator and/or brake pedal; and, . How fast the vehicle was traveling. These data can help provide a better understanding of the circumstances in which crashes and injuries occur. NOTE: EDR data are recorded by your vehicle only if a non-trivial crash situation occurs; no data are recorded by the EDR under normal driving conditions and no personal data (e.g., name, gender, age, and crash location) are recorded. However, other parties, such as law enforcement, could combine the EDR data with the type of personally identifying data routinely acquired during a crash investigation. To read data recorded by an EDR, special equipment is required, and access to the vehicle or the EDR is needed. In addition to the vehicle manufacturer, other parties, such as law enforcement, that have the special equipment, can read the information if they have access to the vehicle or the EDR. 12 General Information sill * Exterior 16 * Interior . 18 * Instrument Panel. 21 * Steering Wheel 22 * Light Control and Wiper Control Levers/ Switches 23 * Combination Meter. 24 U.S.-Spec. Models 24 Canada-Spec. Models.25 * Warning and Indicator Lights 26 Illustrated Index 1 Illustrated Index Exterior s00ay 1 Engine hood (page 462) 2 Headlights (page 231, 491) 3 Turn signal lights (page 241, 491) 4 Windshield wipers (page 243, 484) 5 Moonroof (page 140) 6 Roof rails (page 408) 7 Outside mirrors (page 256) 8 Side turn signal lights (page 241, 491) 9 Door locks (page 128) 10 Tire pressure (page 477) 11 Flat tires (page 429) 12 Tire chains (page 405) 13 Fog lights (page 240, 491) 14 Tie-down hooks (page 436) 15 Towing hook (page 436) 16 Exterior 1 Rear window defogger (page 246) 2 Rear wiper (page 244) 3 Fuel filler lid and cap (page 308) 4 Child safety locks (page 136) 5 Tie-down holes (page 436) 6 Lights (page 231, 491) 7 Turn signal lights (page 241, 491) 8 Rear gate (page 139) 9 Towing hook (page 436) Exterior 17 1 Illustrated Index Interior s00az 1 Lower anchorages for child restraint system (page 68) · U.S.-spec. models: 5 lower anchorages · Canada-spec. models: 4 lower anchorages 2 Seatbelts (page 41) 3 Center console (page 286) 4 Front seats (page 30) 5 Rear seats (page 37) 18 Interior 1 11.6-inch display models*1 (page 190)/ Climate control (page 265)/Audio*2/Navigation system*2 2 Dual 7.0-inch display models*1 (page 213)/Climate control (page 263)/Audio*2 3 USB power supply (page 289)/AUX*2 4 Wireless charger (page 291) 5 Glove box (page 285) 6 Select lever (page 326) *1: Center information display *2: For details about how to use the audio and navigation system (if equipped), refer to the separate navigation/audio Owner’s Manual. – CONTINUED – Interior 19 1 Illustrated Index 1 Map light switches (page 282) 2 Moonroof tilt switch (page 141) 3 Moonroof slide switch (page 141) 4 Door interlock switch (page 282) 5 Buttons for SUBARU STARLINK NOTE For models with SUBARU STARLINK: Refer to the Owner’s Manual supplement for SUBARU STARLINK. 20 Interior Instrument Panel s00ba 1 Power window switches (page 136) 2 Remote control mirror switch (page 257) 3 Combination meter (page 152) 4 Hazard warning flasher switch (page 152) 5 Camera for Driver Monitoring System (page 382) 6 Tilt/Telescopic steering (page 257) 7 Fuse box (page 490) 8 Hood release knob (page 462) 9 Illumination brightness control dial (page 155) 10 Electronic parking brake switch (page 345) 11 Seat heater switches (page 35) 12 Accessory power outlet (page 288) 13 Cup holder (page 287) Instrument Panel 21 1 Illustrated Index Steering Wheel s00bb 1 Audio control switch*1 2 Talk switch for voice command system*1 3 Cruise control switches*2/LIM switch*2 4 Shift paddles (page 330) 5 SI-DRIVE switch (page 332) 6 Heated Steering Wheel switch (page 258) 7 SRS airbag (page 74) 8 Horn (page 259) 9 Hands-free phone switch*1 10 Control switches for combination meter display (color LCD) (page 181) *1: For details about how to use the switches, refer to the separate navigation/audio Owner’s Manual. *2: For details about how to use the switches, refer to the Owner’s Manual supplement for the EyeSight system. 22 Steering Wheel Light Control and Wiper Control Levers/Switches s00bc 1 Windshield wiper (page 241) 2 Mist (page 243) 3 Windshield washer (page 244) 4 Rear window wiper and washer switch (page 244) 5 Wiper intermittent time control switch (page 243) 6 Wiper control lever (page 243) 7 Light control switch (page 231) 8 Fog light switch (page 240) 9 Headlight ON/OFF/AUTO (page 232) 10 Headlight flasher High/Low beam change (page 234) 11 Turn signal lever (page 241) Light Control and Wiper Control Levers/Switches 23 1 Illustrated Index Combination Meter s00bd & U.S.-Spec. Models s00bd01 1 Tachometer (page 153) 2 Select lever/gear position indicator (page 176) 3 Combination meter display (color LCD) (page 180) 4 Trip meter and odometer (page 153) 5 Speedometer (page 152) 6 Fuel gauge (page 154) 7 Digital speed screen (page 188) 8 Engine coolant temperature gauge (page 154) 24 Combination Meter & Canada-Spec. Models s00bd03 1 Tachometer (page 153) 2 Select lever/gear position indicator (page 176) 3 Combination meter display (color LCD) (page 180) 4 Trip meter and odometer (page 153) 5 Speedometer (page 152) 6 Fuel gauge (page 154) 7 Digital speed screen (page 188) 8 Engine coolant temperature gauge (page 154) Combination Meter 25 1 Illustrated Index Warning and Indicator Lights s00be Mark Name Page Seatbelt warning light 157 Front passenger’s seatbelt warning light 157 Rear seatbelt warning light 159 SRS airbag system warning light 160 Front passenger’s frontal airbag ON indicator light 160 Front passenger’s frontal airbag OFF indicator light 160 CHECK ENGINE warning light/Malfunction indicator light 161 Charge warning light 162 Oil pressure warning light 162 Engine low oil level warning light 162 Mark Name Page AT OIL TEMP warning light 162 / ABS warning light 164 / Brake system warning light 165 / Electronic parking brake indicator light 166 Door open indicator light 168 Engine hood open warning light 168 Low fuel warning light 167 All-Wheel Drive warning light 168 Power steering warning light 168 Auto Vehicle Hold indicator light 167 Mark Name Page Vehicle Dynamics Control warning light/Vehicle Dynamics Control operation indicator light 169 Vehicle Dynamics Control OFF indicator light 170 Access key warning indicator (if equipped) 170 Security indicator light 175 Turn signal indicator lights 176 High beam indicator light 176 High beam assist indicator 176 Automatic headlight beam leveler warning light 176 LED headlight warning light 177 Steering Responsive Headlight OFF indicator light 177 26 Warning and Indicator Lights Mark Name Page Steering Responsive Headlight warning light (if equipped) 177 Front fog light indicator light (if equipped) 177 Headlight indicator light 177 Low tire pressure warning light (U.S.-spec. models) 163 Windshield washer fluid warning light 168 Auto Start Stop OFF indicator light 177 Auto Start Stop indicator light (green) 177 Auto Start Stop warning light (yellow) 177 Auto Start Stop No Activity Detected indicator light 178 BSD/RCTA warning indicator (if equipped) 178 BSD/RCTA OFF indicator (if equipped) 178 Mark Name Page SI-DRIVE indicator 176 176 X-MODE indicator 178 Hill descent control indicator light 178 Icy road surface warning indicator 178 RAB warning indicator (if equipped) 179 RAB OFF indicator (if equipped) 179 Sonar Audible Alarm OFF indicator (if equipped) 179 Driver Monitoring System operation indicator light (green) (if equipped) 179 Driver Monitoring System warning light (yellow) (if equipped) 179 Mark Name Page Driver Monitoring System OFF indicator light (if equipped) 179 Driver Monitoring System temporary stop indicator light (if equipped) 180 Warning and Indicator Lights 27 1 Illustrated Index———————— — — — — — — — — s01 1-1. Front Seats 30 Power Seat (If Equipped) 33 Manual Seat (If Equipped) .33 Head Restraint Adjustment .34 1-2. Seat Heater (If Equipped). 35 1-3. Rear Seats. 37 Folding Down the Rear Seatback 37 Head Restraint Adjustment .39 Armrest (If Equipped)41 1-4. Seatbelts 41 Seatbelt Safety Tips41 Emergency Locking Retractor (ELR) .42 Automatic Locking Retractor/Emergency Locking Retractor (ALR/ELR) 43 Seatbelt Warning Light and Chime 43 Fastening the Seatbelt 43 Seatbelt Maintenance50 1-5. Seatbelt Extender . 50 1-6. Seatbelt Pretensioners . 52 Seatbelt with Shoulder Belt Pretensioner 53 Seatbelt with Shoulder Belt and Lap Belt Pretensioners .54 System Monitors.54 System Servicing55 Precautions against Vehicle Modification 55 1-7. Rear Seat Reminder . 56 1-8. Child Restraint Systems 56 Safety Precautions56 Safety Tips for Installing Child Restraint Systems.58 Choosing a Child Restraint System 59 When Installing the Forward-Facing Child Restraint System on the Front Passenger’s Seat .60 Installing Child Restraint Systems with ALR/ELR Seatbelt.61 Installing a Booster Seat or Booster Cushion .66 Installation of Child Restraint Systems by Use of Lower and Tether Anchorages (LATCH) 68 Tether Anchorages .72 1-9. SRS Airbag (Supplemental Restraint System Airbag). 74 General Precautions Regarding SRS Airbag System 74 General Precautions Regarding SRS Airbag System for Accessories and Any Objects .76 General Precautions Regarding SRS Airbag System and Children78 Components 81 SUBARU Advanced Frontal Airbag System.83 SRS Side Airbag and SRS Curtain Airbag .95 SRS Airbag System Monitors . 102 SRS Airbag System Servicing 103 Precautions against Vehicle Modification 104 How to Contact the Vehicle Manufacturer concerning Modifications for Persons with Disabilities That May Affect the Advanced Airbag System . 105 Seat, Seatbelt and SRS Airbags 1 Seat, Seatbelt and SRS Airbags 1-1. Front Seats s01aa WARNING . Never adjust the seat while driving, as personal injury or loss of vehicle control may occur. . Before adjusting the seat, ensure nothing is blocking the adjusting mechanism. . After adjusting the seat, move it back and forth to ensure the seat is securely locked. If it is not, it may move suddenly or the seatbelt may not operate properly. . Do not put objects under the front seats. They may interfere with front seat locking mechanism and cause an accident. . Seatbelts provide maximum restraint when the occupant sits back and upright in the seat. To reduce the risk of sliding under the seatbelt in a collision, the front seatbacks should always be used in the upright position while the vehicle is running. If the front seatbacks are not in the upright position and a collision occurs, the risk of sliding under the lap belt and of the lap belt sliding up over the abdomen will increase, and both can result in serious injury or death. . The SRS airbags deploy with considerable speed and force. Occupants who are not seated in the proper upright position when the SRS airbag deploys could suffer very serious injuries. Because the SRS airbag needs enough space for deployment, the driver should always sit upright and well back in the seat as far from the steering wheel as practical while still maintaining full vehicle control, and the front passenger should move the seat as far back as possible and sit upright and well back in the seat. WARNING . NEVER INSTALL A REARWARDFACING CHILD RESTRAINT SYSTEM ON THE FRONT PASSENGER’S SEAT. DOING SO RISKS SERIOUS INJURY OR DEATH TO THE CHILD BY PLACING THE CHILD’S HEAD TOO CLOSE TO THE SRS AIRBAG. . SUBARU strongly recommends that ALL infants and children (including those in child restraint systems) sit in the REAR seat properly restrained in a child restraint system or in a seatbelt, whichever is appropriate for the child’s age, height and weight. 30 Front Seats The SRS airbag deploys with considerable speed and force and can injure or even kill children, especially if they are not restrained or improperly restrained. Because children are lighter and weaker than adults, their risk of being injured from deployment is greater. According to accident statistics, children are safer when properly restrained in the rear seating positions than in the front seating positions. For instructions and precautions concerning child restraint systems, refer to “Child Restraint Systems” P56. WARNING To prevent the passenger from sliding under the seatbelt in the event of a collision, always put the seatback in the upright position while the vehicle is in motion. Also, do not place objects such as cushions between the passenger and the seatback. If you do so, the risk of sliding under the lap belt and of the lap belt sliding up over the abdomen will increase, and both can result in serious injury or death. WARNING Do not let rear passengers rest their feet between the front seatback and seat cushion. Doing so may interfere with the proper operation of the following systems and could result in serious injury. . Occupant detection system . SRS side airbag . SRS seat cushion airbag . Front seat heater (if equipped) . Power seat (if equipped) – CONTINUED – Front Seats 31 1 Seat, Seatbelt and SRS Airbags WARNING Do not press your feet onto the instrument panel. Doing so may prevent the occupant detection function of the SRS airbag system and SRS airbag from functioning correctly. This may result in serious injury or death in the event of an accident. WARNING Seatbelts provide maximum restraint when the occupant sits well back and upright in the seat. Do not put cushions or any other materials between occupants and seatbacks or seat cushions. If you do so, the risk of sliding under the lap belt and of the lap belt sliding up over the abdomen will increase, and both can result in serious internal injury or death. WARNING Never stack luggage or other cargo higher than the top of the seatback because it could tumble forward and injure passengers in the event of a sudden stop or accident. 32 Front Seats & Power Seat (If Equipped) s01aa02 ! Driver’s seat s01aa0208 1 Seat position forward/backward control switch To adjust the seat forward or backward, move the control switch forward or backward. During forward/backward adjustment of the seat, you cannot adjust the seat cushion angle or seat cushion height. 2 Seat cushion angle control switch To adjust the seat cushion angle, pull up or push down the front end of the control switch. 3 Seat height control switch To adjust the seat height, pull up or push down the rear end of the control switch. 4 Seatback angle (reclining) control switch To adjust the angle of the seatback, move the control switch. 5 Lumbar support control switch To increase lower back support, push the front side of the switch. To decrease lower back support, push the rear side of the switch. & Manual Seat (If Equipped) s01aa01 ! Forward and backward adjustment s01aa0101 1. Sit in the seat to adjust. 2. Pull the lever upward, slide the seat to the desired position, and then release the lever. 3. Try to move the seat back and forth to make sure that it is securely locked into place. – CONTINUED – Front Seats 33 1 Seat, Seatbelt and SRS Airbags ! Reclining the seatback s01aa0102 1. Pull up the reclining lever, adjust the seatback to the desired position, and then release the lever. 2. Make sure the seatback is securely locked into place. The seatback placed in a reclined position can spring back upward with force when pulling up the lever. While operating the lever to return the seatback, hold the seatback lightly so that it may be raised back gradually. ! Seat height adjustment (driver’s seat) s01aa0103 1 When the lever is pushed down, the seat is lowered. 2 When the lever is pulled up, the seat rises. The height of the seat can be adjusted by moving the seat adjustment lever up and down. & Head Restraint Adjustment s01aa04 WARNING . Never drive the vehicle with the head restraints removed because they are designed to reduce the risk of serious neck injury in the event that the vehicle is struck from the rear. Also, never install the head restraints backwards. Doing so will prevent the head restraints from functioning as intended. Therefore, when the head restraints are removed, all head restraints must be reinstalled properly to protect vehicle occupants. . All occupants, including the driver, should not operate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of a crash. . The front seat head restraints are designed to be installed into the front seats only. The rear seat head restraints are designed to be installed into the rear seats only. Do not attempt to install the front seat head restraints into the rear seats, or the rear seat head restraints into the front seats. Both the driver’s seat and front passenger’s seat are equipped with head restraints. Both head restraints are adjustable in the following ways. 34 Front Seats ! Head restraint height adjustment s01aa0401 1 Head restraint 2 Release button To raise: Pull the head restraint up. To lower: Push the head restraint down while pressing the release button on the top of the seatback. To remove: While pressing the release button, pull out the head restraint. To install: Install the head restraint into the holes that are located on the top of the seatback until the head restraint locks. Press and hold the release button to lower the head restraint. Each head restraint should be adjusted so that the center of the head restraint is closest to the top of the occupant’s ears. NOTE It is not possible to remove or install the head restraint without reclining the front seatback. Reclining the front seatback and then remove or install the head restraint. 1-2. Seat Heater (If Equipped) s01ab The seat heater is equipped in the front seats. The seat heater operates when the ignition switch is either in the “ACC” or “ON” position. CAUTION . Do not put hard or heavy objects or ones with protrusions on the seat, and do not stab the seat with sharp objects, such as pins or needles. . People with delicate skin may suffer slight burns even at low temperatures if they use the seat heater for a long period of time. When using the heater, always be sure to warn the persons concerned. . Do not put anything on the seat which insulates against heat, such as a blanket, cushion, or similar items. This may cause the seat heater to overheat. . When the seat is warmed enough or before you leave the vehicle, be sure to turn off the seat heater. – CONTINUED – Seat Heater 35 1 Seat, Seatbelt and SRS Airbags NOTE Use of the seat heater for a long period of time while the engine is not running can cause battery discharge. 1 HI – Rapid heating 2 LO – Normal heating 3 Off A Left-hand side B Right-hand side To turn on the seat heater, push the “LO” or “HI” position on the switch, as desired, depending on the temperature. Selecting the “HI” position will cause the seat to heat up quicker. To turn off the seat heater, lightly press the opposite side of the current position. The indicator located on the switch illuminates when the seat heater is in operation. 36 Seat Heater 1-3. Rear Seats s01ac WARNING Seatbelts provide maximum restraint when the occupant sits back and upright in the seat. Do not place cushions or any other materials between occupants and seatbacks or seat cushions. By doing so, the risk of sliding under the lap belt and of the lap belt sliding up over the abdomen will increase, and both can result in serious internal injury or death. WARNING Never stack luggage or other cargo higher than the top of the seatback as it could tumble forward and injure passengers in the event of a sudden stop or accident. & Folding Down the Rear Seatback s01ac02 WARNING . When you fold down the seatback, check that there are no passengers or objects on the rear seat. Not doing so creates a risk of injury or property damage if the seatback suddenly folds down. . Never allow passengers to ride on the folded rear seatback or in the cargo area. Doing so may result in serious injury or death. . Secure all objects and especially long items properly to prevent them from being thrown around inside the vehicle and causing serious injury during a sudden stop, a sudden steering maneuver or a rapid acceleration. . When you return the seatback to its original position, shake the seatback slightly to confirm that it is securely fixed in place. If the seatback is not securely fixed in place, the seatback may suddenly fold down in the event of sudden braking, or objects may move out from the cargo area, which could cause serious injury or death. – CONTINUED – Rear Seats 37 1 Seat, Seatbelt and SRS Airbags 1 Striker WARNING When the seatback is returned to its original position, observe the following precautions. Failure to do so may lead to serious injury or an accident because the operation efficiency of the seatbelt is inhibited. . The seatbelt should not be caught in the seatback and it should be fully visible. . The seatbelt should not pass behind the striker for the seatback. CAUTION Do not hang luggage etc. on the striker. The possibility exists that the seatback may not be able to be fixed firmly in place. This could lead to unexpected accidents ! Folding down the rear seatback s01ac0202 Lock release knobs 1. Lower the head restraints. 2. Unlock the seatback by pulling the lock release knob then fold the seatback down. 38 Rear Seats ! Return the rear seatback s01ac0204 WARNING . When returning the seatback to its original position, observe the following precaution. Failure to observe the precaution may damage the seatbelt, impairing its effectiveness, and possibly result in a serious injury. . When returning the seatback to its original position, pull the seatbelt out towards the vehicle exterior so that it will not be caught between the seatback and the trim. Lock release knob 1 Unlocked 2 Locked A Unlocking marker in red To return the seatback to its original position, raise the seatback until it locks into place and make sure that the unlocking marker on the lock release knob is no longer visible. WARNING When you return the seatback to its original position, check that the unlocking marker on the lock release knob is not visible. Also, shake the seatback slightly to confirm that it is securely fixed in place. If the seatback is not securely fixed in place, the seatback may suddenly fold down in the event of sudden braking, or objects may move out from the cargo area, which could cause serious injury or death. & Head Restraint Adjustment s01ac03 Both the rear window side seats and the rear center seat are equipped with head restraints. WARNING . Never drive the vehicle with the head restraints removed because they are designed to reduce the risk of serious neck injury in the event that the vehicle is struck from the rear. Therefore, when the head restraints are removed, all head restraints must be reinstalled properly to protect vehicle occupants. . All occupants, including the driver, should not operate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of a crash. . The front seat head restraints are designed to be installed into the – CONTINUED – Rear Seats 39 1 Seat, Seatbelt and SRS Airbags front seats only. The rear seat head restraints are designed to be installed into the rear seats only. Do not attempt to install the front seat head restraints into the rear seats, or the rear seat head restraints into the front seats. ! Rear windows side seating position s01ac0301 1 Head restraint 2 Release button To remove: While pressing the release button, pull out the head restraint. To install: Install the head restraint into the holes that are located on the top of the seatback until the head restraint locks. Press and hold the release button to lower the head restraint. After installing the head restraint, make sure it is securely locked. NOTE When the head restraint cannot be pulled out or installed due to insufficient clearance between the head restraint and the roof, tilt the seat and then perform the installation and removal tasks. ! Rear center seating position s01ac0302 1 Incorrect (retracted position) 2 Correct (extended position) CAUTION The head restraint is not intended to be used in the retracted position. Before sitting on the seat, raise the head restraint to the extended position. 1 Head restraint 2 Release button To raise: Pull the head restraint up. To lower: Push the head restraint down while pressing the release button on the top of the seatback. To remove: While pressing the release button, pull out 40 Rear Seats the head restraint. To install: Install the head restraint into the holes that are located on the top of the seatback until the head restraint locks. Press and hold the release button to lower the head restraint. When the rear-center seating position is occupied, raise the head restraint to the extended position. When the rear center seating position is not occupied, lower the head restraint to improve rearward visibility. & Armrest (If Equipped) s01ac01 To lower the armrest, pull the armrest’s top edge. WARNING . Make sure to have the rear passengers wear the seatbelts before lowering the armrest. If the rear passengers wear the seatbelts after lowering the armrest, seatbelts cannot provide maximum restraint, causing serious injuries. . To avoid serious injury, never allow passengers to sit on the center armrest while the vehicle is in motion. 1-4. Seatbelts s01ae & Seatbelt Safety Tips s01ae01 WARNING . All persons in the vehicle should fasten their seatbelts BEFORE the vehicle starts to move. Otherwise, the possibility of serious injury becomes greater in the event of a sudden stop or accident. . All belts should fit snugly in order to provide full restraint. Loose fitting belts are not as effective in preventing or reducing injury. . Each seatbelt is designed to support only one person. Never use a single belt for two or more persons – even children. Otherwise, in an accident, serious injury or death could result. . Replace all seatbelt assemblies including retractors and attaching hardware worn by occupants of a vehicle that has been in a serious accident. The entire assembly should be replaced even if damage is not obvious. – CONTINUED – Seatbelts 41 1 Seat, Seatbelt and SRS Airbags . NEVER INSTALL A REARWARDFACING CHILD RESTRAINT SYSTEM ON THE FRONT PASSENGER’S SEAT. DOING SO RISKS SERIOUS INJURY OR DEATH TO THE CHILD BY PLACING THE CHILD’S HEAD TOO CLOSE TO THE SRS AIRBAG. . SUBARU strongly recommends that ALL infants and children (including those in child restraint systems) sit in the REAR seat properly restrained in a child restraint system or in a seatbelt, whichever is appropriate for the child’s age, height and weight. The SRS airbag deploys with considerable speed and force and can injure or even kill children, especially if they are not restrained or improperly restrained. Because children are lighter and weaker than adults, their risk of being injured from deployment is greater. According to accident statistics, children are safer when properly restrained in the rear seating positions than in the front seating positions. For instructions and precautions concerning child restraint systems, refer to “Child Restraint Systems” P56. This vehicle is equipped with a crash sensing and diagnostic module, which will record whether the seatbelt is in use by the front passenger when an SRS frontal, side or curtain airbag deploys. ! Infants or small children s01ae0101 Use a child restraint system that is suitable for this vehicle. Refer to “Child Restraint Systems” P56. ! Children s01ae0102 If a child is too big for a child restraint system, the child should sit in the rear seat and be restrained using the seatbelts. According to accident statistics, children are safer when properly restrained in the rear seating positions than in the front seating positions. Never allow a child to stand up or kneel on the seat. If the shoulder portion of the belt crosses the face or neck, move the child closer to the belt buckle to help provide a good shoulder belt fit. Care must be taken to securely place the lap belt as low as possible on the hips and not on the child’s waist. If the shoulder portion of the belt cannot be properly positioned, a child restraint system should be used. Never place the shoulder belt under the child’s arm or behind the child’s back. ! Expectant mothers s01ae0103 Expectant mothers also need to use the seatbelts. They should consult their doctor for specific recommendations. The lap belt should be worn securely and as low as possible over the hips, not over the waist. & Emergency Locking Retractor (ELR) s01ae02 The driver’s seatbelt has an Emergency Locking Retractor (ELR). The emergency locking retractor allows normal body movement but the retractor locks automatically during a sudden stop, impact or if you pull the belt very quickly out of the retractor. 42 Seatbelts & Automatic Locking Retractor/ Emergency Locking Retractor (ALR/ELR) s01ae03 Each passenger’s seatbelt has an Automatic Locking Retractor/Emergency Locking Retractor (ALR/ELR). The Automatic Locking Retractor/Emergency Locking Retractor normally functions as an Emergency Locking Retractor (ELR). The ALR/ ELR has an additional locking mode, “Automatic Locking Retractor (ALR) mode”, intended to secure a child restraint system. The ALR mode functions as follows. When the seatbelt is once drawn out completely and is then retracted even slightly, the retractor locks the seatbelt in that position and the seatbelt cannot be extended. As the belt is rewinding, clicks will be heard which indicate the retractor functions as an ALR. When the seatbelt is retracted fully, the ALR mode is canceled and the ELR mode is restored. When securing a child restraint system on the rear seats by using a seatbelt, the seatbelt must be changed over to the Automatic Locking Retractor (ALR) mode. For instructions on how to install the child restraint system using a seatbelt, refer to “Installing Child Restraint Systems with ALR/ELR Seatbelt” P61. When the child restraint system is removed, make sure that the retractor is restored to the Emergency Locking Retractor (ELR) mode by allowing the seatbelt to retract fully. & Seatbelt Warning Light and Chime s01ae04 Refer to “Seatbelt Warning Light and Chime” P157. & Fastening the Seatbelt s01ae06 WARNING . Never use a belt that is twisted or reversed. In an accident, this can increase the risk or severity of injury. . Keep the lap belt as low as possible on your hips. In a collision, this spreads the force of the lap belt over stronger hip bones instead of across the weaker abdomen. . Seatbelts provide maximum restraint when the occupant sits well back and upright in the seat. To reduce the risk of sliding under the seatbelt in a collision, the front seatbacks should be always used in the upright position while the vehicle is running. If the front seatbacks are not used in the upright position in a collision, the risk of sliding under the lap belt and of the lap belt sliding up over the abdomen will increase, and both can result in serious internal injury or death. . Do not put cushions or any other materials between occupants and seatbacks or seat cushions. If you do so, the risk of sliding under the lap belt and of the lap belt sliding up over the abdomen will increase, and both can result in serious internal injury or death. – CONTINUED – Seatbelts 43 1 Seat, Seatbelt and SRS Airbags WARNING Never place the shoulder belt under the arm or behind the back. If an accident occurs, this can increase the risk or severity of injury. CAUTION Metallic parts of the seatbelt can become very hot in a vehicle that has been closed up in sunny weather; they could burn an occupant. Do not touch such hot parts until they cool. ! Front seatbelts s01ae0601 1. Adjust the seat position: Driver’s seat: Adjust the seatback to the upright position. Move the seat as far from the steering wheel as practical while still maintaining full vehicle control. Front passenger’s seat: Adjust the seatback to the upright position. Move the seat as far back as possible. 2. Sit well back in the seat. 3. Pick up the tongue plate and pull the belt out slowly. Do not let it get twisted. . If the belt stops before reaching the buckle, return the belt slightly and pull it out more slowly. . If the belt still cannot be unlocked, let the belt retract slightly after giving it a strong pull, then pull it out slowly again. 4. Insert the tongue plate into the buckle until you hear a click. 5. To tighten the lap part, pull up on the shoulder belt. 6. Place the lap belt as low as possible on the hips, not on the waist. 44 Seatbelts ! Adjusting the front seat shoulder belt anchor height s01ae060101 Adjust the shoulder belt anchor height to the position best suited for the driver/front passenger. Always adjust the anchor height so that the shoulder belt passes over the middle of the shoulder without touching the neck. To raise: Pull the release knob and slide the anchor up. To lower: Pull the release knob and slide the anchor down. Pull down on the anchor to make sure that it is locked in place. WARNING When wearing the seatbelts, make sure the shoulder portion of the webbing does not pass over your neck. If it does, adjust the seatbelt anchor to a lower position. Placing the shoulder belt over the neck may result in neck injury during sudden braking or in a collision. ! Unfastening the seatbelt s01ae060102 1 Button 1. Push the button on the buckle. 2. Retract the seatbelt slowly to prevent it from getting tangled or twisted. Before closing the door, make sure that the belts are retracted properly to avoid catching the belt webbing in the door. ! Rear seatbelts (except rear center seatbelt) s01ae0602 1. Sit well back in the seat. 2. Pick up the tongue plate and pull the belt out slowly. Do not let it get twisted. . If the belt stops before reaching the buckle, return the belt slightly and pull it out more slowly. . If the belt still cannot be unlocked, let the belt retract slightly after giving a strong pull on it, then pull it out slowly again. 3. Insert the tongue plate into the buckle until you hear a click. – CONTINUED – Seatbelts 45 1 Seat, Seatbelt and SRS Airbags 4. To tighten the lap part, pull up on the shoulder belt. 5. Place the lap belt as low as possible on the hips, not on the waist. ! Unfastening the seatbelt s01ae060201 1 Button 1. Push the button on the buckle. 2. Retract the seatbelt slowly to prevent it from getting tangled or twisted. Before closing the door, make sure that the belts are retracted properly to avoid catching the belt webbing in the door. ! Rear center seatbelt s01ae0603 1 Center seatbelt tongue plate 2 Anchor tongue plate 3 Anchor buckle 4 Center seatbelt buckle 46 Seatbelts WARNING Fastening the seatbelt with the webbing twisted can increase the risk or severity of injury in an accident. When fastening the belt after it is pulled out from the retractor, especially when inserting the anchor tongue plate into the mating buckle (on right-hand side), always check that the webbing is not twisted. WARNING . Be sure to fasten both tongue plates to the respective buckles. If the seatbelt is used only as a shoulder belt (with the anchor tongue plate not fastened to the anchor buckle on the right-hand side), it cannot properly restrain the wearer in position in an accident, possibly resulting in serious injury or death. . Before fastening the seatbelt, confirm that the seatbelt is routed through the belt guide. A seatbelt not routed through the belt guide can cause neck injuries during sudden braking or in a collision, since it may slip up on the neck. The rear center seatbelt is stowed in the seatbelt holder on the right side of the cargo area. 1. Raise the head restraint to the extended position. Do not remove the head restraint. 2. Remove the center seatbelt tongue plate, and then slide the webbing to remove the seatbelt from the belt holder and pull out the seatbelt slowly. – CONTINUED – Seatbelts 47 1 Seat, Seatbelt and SRS Airbags 3. After drawing out the seatbelt, pass it through the belt guide as follows: First insert one edge of the belt into the open gap in the belt guide; then slide the rest of the belt in, so that the whole belt fits inside. 4. Make sure that the “ ” mark on the anchor tongue plate and the “ ” mark on the anchor buckle face outwards. 5. After confirming that the webbing is not twisted, insert the anchor tongue plate attached at the webbing end into the buckle on the right-hand side until a click is heard. . If the belt stops before reaching the buckle, return the belt slightly and pull it out more slowly. . If the belt still cannot be unlocked, let the belt retract slightly after giving it a strong pull, then pull it out slowly again. 6. Insert the center seatbelt tongue plate into the center seatbelt buckle until it clicks. 7. To make the lap part tight, pull up on the shoulder belt. And place the lap belt as low as possible on your hips, 48 Seatbelts not on your waist. ! Unfastening the seatbelt s01ae060301 1 Button 1. Push the release button of the center seatbelt buckle (on the left-hand side) to unfasten the seatbelt. NOTE When the seatback is folded down for greater cargo area, it is necessary to disconnect the connector. 2. Insert a center seatbelt tongue plate or other hard pointed object into the slot in the anchor buckle on the right-hand side and push it in. The anchor tongue plate will then disconnect from the buckle. 3. Allow the retractor to roll up the belt. You should hold the webbing end and guide it back into the retractor while it is rolling up. Then, pass the webbing under the belt holder and insert the anchor tongue plate into the holder. – CONTINUED – Seatbelts 49 1 Seat, Seatbelt and SRS Airbags CAUTION Observe the following precautions. Otherwise, the tongue plate can hit against the trim, causing damage to the trim. . Do not allow the retractor to roll up the seatbelt too quickly. . Have the seatbelt fully rolled up so that the tongue plates are neatly stored. & Seatbelt Maintenance s01ae07 To clean the seatbelts, use a mild soap and lukewarm water. Never bleach or dye the belts because this could seriously affect their strength. Inspect the seatbelts and attachments including the webbing and all hardware periodically for cracks, cuts, gashes, tears, damage, loose bolts or worn areas. Replace the seatbelts even if only minor damage is found. CAUTION . Keep the belts free of polishes, oils, chemicals and particularly battery acid. . Never attempt to make modifications or changes that will prevent the seatbelt from operating properly. 1-5. Seatbelt Extender s01ai If the front seatbelts are not long enough to permit the tongue plate to engage with the seatbelt buckle, an optional seatbelt extender is available from your SUBARU dealer. When ordering an extender, only order one particularly designed for your vehicle. See your SUBARU dealer for assistance. The extender adds approximately 8 inches (200 mm) of length and it can be used for either the driver or front passenger seating position. For the safety of others, the extender should be removed after each use, especially if the next person using the seatbelt does not need one. 50 Seatbelt Extender WARNING Be sure to observe the following when using the seatbelt extender. Failure to follow these instructions and warnings could reduce the effectiveness of the seatbelt and result in more serious injury or death in the event of a collision. . Never use the seatbelt extender with a child restraint system, as it may not securely hold the restraint system in place during an accident, significantly increasing the risk of death or serious injury. . Never use the extender when the belt itself is long enough to permit it to be buckled properly. If removal of heavy clothing is all that is needed to permit the seatbelt to be buckled properly, remove the heavy clothing and do not use the extender. . Never leave the seatbelt extender’s tongue plate engaged with the seatbelt buckle when not in use. Doing so may prevent the airbag system from functioning properly. . Never connect the seatbelt extender to the passenger seatbelt buckle when the passenger seat is empty; doing so may prevents the airbag system from functioning properly. . Do not use the extender if the buckle of the extender rests over the abdomen. . Do not let someone else use the extender. Use of an extender when it is not needed could reduce the effectiveness of the seatbelt and result in more serious injury or death in the event of a collision. . Use the extender only for the front seatbelts and only for the model for which it was originally provided. Never use the extender for the rear seatbelts or for a different model. . Before you fasten a seatbelt extender, make sure that the seatbelt extender is not twisted. A twisted seatbelt extender can increase the risk of a severe injury in an accident. . Do not use more than one seatbelt extender at a time. Doing so could decrease the effectiveness of the seatbelt and increase the risk of injury or death in an accident. . Do not use a seatbelt extender that has been used in an accident or damaged. WARNING . Make sure that the front passenger’s frontal airbag ON indicator light is on when you use a seatbelt extender in the front passenger’s seat. The front passenger’s frontal airbag OFF indicator must also be off. If it is on, the front passenger’s SRS airbag will not deploy in a collision, which could result in death or serious injury. Refer to “Front – CONTINUED – Seatbelt Extender 51 1 Seat, Seatbelt and SRS Airbags Passenger’s Frontal Airbag ON and OFF Indicators Light” P160. . The following conditions may cause the SRS frontal airbag system to detect that the driver and front passenger are wearing seatbelts, which prevents the SRS frontal airbag system from operating correctly. – The tongue plates of the driver and front passenger seatbelt extenders are inserted into the seatbelt buckles, but the respective extenders and seatbelts are not connected. – Leaving the tongue plate of the extender inserted into the seatbelt buckle when not in use. These conditions may prevent the seatbelt warning light and warning alarm from operating correctly. They may also prevent the SRS frontal airbags from operating correctly in a collision, which can result in injury or death. When you use a seatbelt extender, always attach it to the seatbelt buckle and seatbelt tongue plate correctly. To connect the extender to the seatbelt, insert the tongue plate into the seatbelt buckle so that the “PRESS” marks on the buckle-release buttons of the extender and the seatbelt are both facing the same direction, as shown in the illustration. You will hear a click when the tongue plate locks into the buckle. When releasing the seatbelt, press on the buckle-release button on the extender, not on the seatbelt. This helps to prevent damage to the vehicle interior and extender itself. 1-6. Seatbelt Pretensioners s01af The following seatbelts have a seatbelt pretensioner. . Driver’s seatbelt . Front passenger’s seatbelt . Window-side rear passenger’s seatbelts The seatbelt pretensioners are designed to be activated in the event of an accident involving a moderate to severe frontal and side collision and rollover accident. WARNING . To obtain maximum protection, the occupants should sit in an upright position with their seatbelts properly fastened. Refer to “Seatbelts” P41. . Do not modify, remove or strike the seatbelt retractor assemblies equipped with seatbelt pretensioners or surrounding area. This could result in accidental activation of the seatbelt pretensioners or could make the system inoperative, possibly resulting in serious injury. Seatbelt pretensioners have no user-serviceable parts. For required servicing of 52 Seatbelt Pretensioners seatbelt retractors equipped with seatbelt pretensioners, consult your SUBARU dealer. . When discarding seatbelt retractor assemblies equipped with seatbelt pretensioners or scrapping the entire vehicle due to collision damage or for other reasons, consult your SUBARU dealer. NOTE . Seatbelt pretensioners are not designed to activate in minor impacts or in rear impacts. The pretensioner can also be activated by the following sensors. – Front impact sensors – Side impact sensors – Rollover sensor . Pretensioners are designed to function on a one-time-only basis. In the event that a pretensioner is activated, the seatbelt retractor assemblies equipped with seatbelt pretensioners should be replaced only by an authorized SUBARU dealer. When replacing seatbelt retractor assemblies, use only genuine SUBARU parts. . If a seatbelt that has a seatbelt pretensioner does not retract or cannot be pulled out due to a malfunction or activation of the pretensioner, contact your SUBARU dealer as soon as possible. . If the seatbelt retractor assembly or surrounding area has been damaged, contact your SUBARU dealer as soon as possible. . When you sell your vehicle, we urge you to inform the buyer that the vehicle is equipped with seatbelt pretensioners. Also, notify the buyer of the contents in this section. & Seatbelt with Shoulder Belt Pretensioner s01af01 NOTE This section is applicable to the following components. . Front passenger’s seatbelt . Rear passenger’s seatbelt (windowside) If the sensor detects a certain predetermined amount of force during frontal or side collisions or rollover accidents, any seatbelt that has a seatbelt pretensioner is quickly drawn back in by the retractor to take up the slack so that the belt more effectively restrains the seat occupant. The window-side rear passenger’s seatbelt pretensioner includes a tension reducing device that limits the peak forces exerted by the seatbelt on the occupant in the event of a collision. The front passenger’s seatbelt pretensioner includes a tension reducing device which limits the peak forces exerted by the seatbelt on the occupant in the event of a collision. – CONTINUED – Seatbelt Pretensioners 53 1 Seat, Seatbelt and SRS Airbags . Adaptive force limiter The front passenger’s side adaptive force limiter will select a reducing load to the suit body size of the occupant as detected by the occupant detection sensor. When a seatbelt pretensioner is activated, an operating noise will be heard and a small amount of smoke will be released. These occurrences are normal and not harmful. This smoke does not indicate a fire in the vehicle. Once the seatbelt pretensioner has been activated, the seatbelt retractor remains locked. Consequently, the seatbelt cannot be pulled out and retracted and therefore must be replaced. & Seatbelt with Shoulder Belt and Lap Belt Pretensioners s01af02 NOTE This section is applicable to the driver’s seatbelt. 1 Seatbelt retractor assembly (shoulder belt pretensioner) 2 Lap belt pretensioner If the sensor detects a certain predetermined amount of force during frontal or side collisions or rollover accidents, any seatbelt that has a seatbelt pretensioner is quickly drawn back in by the retractor to take up the slack so that the belt more effectively restrains the seat occupant. The shoulder belt pretensioner is supplemented by a lap belt pretensioner, which is located at the base of the center pillar. The lap belt pretensioner instantaneously pulls in the belt to eliminate slack if a certain level of frontal collision force is detected. As a result, the seatbelt restrains the front seat occupant more effectively. The driver’s seatbelt pretensioner includes a tension reducing device which limits the peak forces exerted by the seatbelt on the occupant in the event of a collision. When a seatbelt pretensioner is activated, an operating noise will be heard and a small amount of smoke will be released. These occurrences are normal and not harmful. This smoke does not indicate a fire in the vehicle. Once the seatbelt pretensioner has been activated, the seatbelt pretensioner remains locked. Consequently, the seatbelt cannot be pulled out and retracted and therefore must be replaced. & System Monitors s01af03 A diagnostic system continually monitors the readiness of the seatbelt pretensioner with the ignition switch in the “ON” position. The seatbelt pretensioners share the control module with the SRS airbag system. Therefore, if any malfunction occurs in a seatbelt pretensioner, the 54 Seatbelt Pretensioners SRS airbag system warning light will illuminate. For details, refer to “SRS Airbag System Monitors” P102. & System Servicing s01af04 WARNING . When discarding a seatbelt retractor assembly or scrapping the entire vehicle damaged by a collision, consult your SUBARU dealer. . Tampering with or disconnecting the system’s wiring could result in accidental activation of the seatbelt pretensioner and/or SRS airbag or could make the system inoperative, which may result in serious injury. Do not use electrical test equipment on any circuit related to the seatbelt pretensioner and SRS airbag systems. For required servicing of the seatbelt pretensioner, consult your nearest SUBARU dealer. CAUTION For the locations of the sensors and control modules, refer to “Components” P81. If you need service or repair in those areas or near the front seatbelt retractors, have the work performed by your authorized SUBARU dealer. NOTE If the front or side part of the vehicle is damaged in an accident to the extent that the seatbelt pretensioner does not operate, contact your SUBARU dealer as soon as possible. & Precautions against Vehicle Modification s01af05 Always consult your SUBARU dealer if you want to install any accessory parts to your vehicle. CAUTION Do not perform any of the following modifications. Such modifications can interfere with proper operation of the seatbelt pretensioners. . Attachment of any equipment (bush bar, winches, snow plow, skid plate, etc.) other than genuine SUBARU accessory parts to the front end. . Modification of the suspension system or front end structure. . Installation of a tire of different size and construction from the tires specified on the vehicle placard attached to the driver’s door pillar or specified for individual vehicle models in this Owner’s Manual. Seatbelt Pretensioners 55 1 Seat, Seatbelt and SRS Airbags 1-7. Rear Seat Reminder s01at This function prompts the driver to confirm the presence of passengers and cargo in the rear. This function will be activated when the rear doors are opened and closed. It alerts the driver by warning messages on the combination meter display (color LCD) and beeps when the ignition switch is turned from the “ON” position to the “OFF” position. NOTE . This function does not directly detect passengers and cargo in the rear seat. . This function detects the opening and closing of the rear doors. In this situation, there is the possibility that the following phenomenon may occur. – It may alert the driver even if there are no passengers or cargo in the rear seat. – It may not alert the driver even if there are passengers and cargo in the rear seat. . This function can be set to on or off by the “Car settings”. For details, refer to “Car settings” P203 (11.6- inch display models) or “Vehicle setting icons” P221 (dual 7.0-inch display models). . The ON/OFF setting will not be changed even if the ignition switch is turned to the “OFF” position. . The ON/OFF setting will be returned to the default setting if the battery is removed. 1-8. Child Restraint Systems s01ag & Safety Precautions s01ag19 Infants and children should be placed in an infant or child restraint system on the rear seat while riding in the vehicle. You should use an infant or child restraint system that meets Federal Motor Vehicle Safety Standards or Canada Motor Vehicle Safety Standards, is compatible with your vehicle and is appropriate for the child’s age and size. All child restraint systems are designed to be secured in vehicle seats by lap belts or the lap belt portion of a lap/shoulder belt (except those described in “Installation of Child Restraint Systems by Use of Lower and Tether Anchorages (LATCH)” P68). 56 Rear Seat Reminder Children could be endangered in an accident if their child restraint systems are not properly secured in the vehicle. When installing the child restraint system, carefully follow the manufacturer’s instructions. According to accident statistics, children are safer when properly restrained in the rear seating positions than in the front seating positions. All U.S. states and Canadian provinces require that infants and small children be restrained in an approved child restraint system at all times while the vehicle is moving. Lock release knob 1 Unlocked 2 Locked A Unlocking marker in red WARNING . Before installing a child restraint system, be sure to confirm that the seatback is securely locked into place. Otherwise, in an accident, serious injury or death could result. . Do not leave children in the car unattended. High interior temperatures may cause heat stroke and dehydration that result in serious injury or death. WARNING Never let a passenger hold a child on their lap or in their arms while the vehicle is moving. The passenger cannot protect the child (or infant) from injury in a collision, because the child will be caught between the passenger and objects inside the vehicle. Additionally, if a passenger holds a child on their lap or in their arms in the front seat, they expose the child to another serious danger. Since the SRS airbag deploys with considerable speed and force, the child could be injured or even killed. – CONTINUED – Child Restraint Systems 57 1 Seat, Seatbelt and SRS Airbags WARNING Children should be properly restrained at all times when in the vehicle. Never allow a child to stand or kneel on any seat. An unrestrained child will be thrown forward during a sudden stop or in an accident and can be injured seriously. Additionally, a child who stands or kneels on or in front of the front seat is exposed to another serious danger. Since the SRS airbag deploys with considerable speed and force, the child could be injured or even killed. & Safety Tips for Installing Child Restraint Systems s01ag16 WARNING . Child restraint systems and seatbelts can become hot in a vehicle that has been closed up in sunny weather; they could burn a small child. Check the child restraint system before you place a child in it. . Do not use a seatbelt extender. If a seatbelt extender is used when installing a child restraint system, the seatbelt will not securely hold the child restraint system. Use of a seatbelt extender could cause death or serious injury to children or other passengers in sudden braking, swerving, or accidents. . Attach the child restraint system to the anchors properly. When using the LATCH anchors, be sure that there are no foreign objects around the anchors. Make sure the child restraint system is securely attached. Otherwise, it may cause death or serious injury to children or other passengers in sudden braking, swerving, or accidents. . Do not leave an unsecured child restraint system in your vehicle. Unsecured child restraint systems can be thrown around inside of the vehicle in a sudden stop, turn or accident; they can strike and injure vehicle occupants as well as result in serious injuries or death to the child. . Several types of child restraint systems may conceal the buckle of the neighboring seat. If the occupant of the neighboring seat cannot correctly fasten the seatbelt, that person must move to a different seat. If the seatbelt cannot be correctly fastened, there is the risk of serious injury or death in the event of sudden braking or a collision. . If the child restraint system cannot be correctly installed because it contacts the driver’s seat, move the child restraint system to a different seat. If it cannot be installed in a different seat (other than the driver’s seat), adjust the front seat so that contact does not occur. 58 Child Restraint Systems . Even with advanced airbags, infants and children can be seriously injured by the airbag. Seat children in the rear seat properly restrained. The SRS airbag deploys with considerable speed and force and can injure or even kill children, especially if they are not restrained or improperly restrained. Because children are lighter and weaker than adults, their risk of being injured from deployment is greater. For that reason, be sure to secure ALL types of child restraint systems on the REAR seats. You should choose a restraint system which is appropriate for the child’s age, height and weight. According to accident statistics, children are safer when properly restrained in the rear seating positions than in the front seating positions. . Do not use lower anchorages for a seat in the center seating position unless a child restraint system manufacturer’s instructions permit and specify using anchors spaced as far apart as those in this vehicle. . Do not connect two or more lower hooks onto the same anchorage (bar). . NEVER INSTALL A REARWARDFACING CHILD RESTRAINT SYSTEM ON THE FRONT PASSENGER’S SEAT. DOING SO RISKS SERIOUS INJURY OR DEATH TO THE CHILD BY PLACING THE CHILD’S HEAD TOO CLOSE TO THE SRS AIRBAG. . Do not allow children to lean their heads or any other parts of their bodies against the door or the area of the seat, front and rear pillars or roof side rails. The SRS side airbags and SRS curtain airbags deploy even if children are seated in the child restraint system, and the impact could cause death or serious injury to the child. . To secure the child restraint system, be sure to comply with all installation instructions provided by the child restraint system manufacturer. Not doing so could result in death or serious injury to children in a sudden stop or accident. CAUTION When you install a child restraint system, follow the manufacturer’s instructions supplied with it. After installing the child restraint system, check to ensure that it is held securely in position. If it is not held tight and secure, the danger of your child suffering personal injury in the event of an accident may be increased. & Choosing a Child Restraint System s01ag02 Choose a child restraint system that is appropriate for the child’s age and size (weight and height) in order to provide the – CONTINUED – Child Restraint Systems 59 1 Seat, Seatbelt and SRS Airbags child with proper protection. The child restraint system should meet all applicable requirements of Federal Motor Vehicle Safety Standards for the United States or of Canada Motor Vehicle Safety Standards for Canada. It can be identified by looking for the label on the child restraint system or the manufacturer’s statement of compliance in the document attached to the system. Also it is important for you to make sure that the child restraint system is compatible with the vehicle in which it will be used. NOTE Some sizes of child restraint systems may not fit the vehicle seat. Before purchasing a child restraint system, check whether it fits on the vehicle seat. & When Installing the Forward- Facing Child Restraint System on the Front Passenger’s Seat s01ag15 WARNING . NEVER INSTALL A REARWARDFACING CHILD RESTRAINT SYSTEM ON THE FRONT PASSENGER’S SEAT. DOING SO RISKS SERIOUS INJURY OR DEATH TO THE CHILD BY PLACING THE CHILD’S HEAD TOO CLOSE TO THE SRS AIRBAG. . The front passenger’s seat is not e q u i p p e d w i t h t e t h e r a n – chorages. Therefore, when installing a child restraint system that uses tether straps, do not install it on the front passenger’s seat. Only forward-facing child restraint systems (including booster seats) can be installed on this seat and should only be installed when it is unavoidable. When you install a forward-facing child restraint system to the front passenger’s seat, perform the following procedure. A Seat position: Rearmost as possible B Seat cushion height (if equipped): Upper most C Seatback: Upright 1. Adjust the front passenger’s seat as illustrated. 2. Install the child restraint system to the front passenger’s seat. Refer to “In- 60 Child Restraint Systems stalling a forward facing child restraint system” P63. 3. Place and secure the child in the child restraint system. 4. Check that the front passenger’s frontal airbag ON/OFF indicator light status meets the requirements of your child restraint system. : Front passenger’s frontal airbag ON indicator light : Front passenger’s frontal airbag OFF indicator light When front passenger’s frontal airbag OFF indicator light is illuminated: Only forward-facing child restraint systems can be installed. When front passenger’s frontal airbag ON indicator light is illuminated: When the indicator is illuminated, child restraint systems cannot be installed on the front passenger’s seat. Install the child restraint system on the rear seats. For more details, refer to “SUBARU Advanced Frontal Airbag System” P83. 5. Check that the child restraint system does not contact the head restraint. If the child restraint system does make contact with the head restraint, raise the head restraint to the extended position. If the child restraint system still makes contact, remove the head restraint. For details, refer to “Head Restraint Adjustment” P34. & Installing Child Restraint Systems with ALR/ELR Seatbelt s01ag04 CAUTION . When you install a child restraint system, follow the manufacturer’s instructions supplied with it. After installing the child restraint system, check to ensure that it is held securely in position. If it is not held tight and secure, the danger of your child suffering personal injury in the event of an accident may be increased. . When installing a child restraint system in the rear center seating position, set both seatbacks to the original position. Otherwise, the child restraint system cannot be securely restrained, which may result in death or serious injuries in the event of sudden stop, sudden steering maneuver or an accident. ! Installing a rearward facing child restraint system s01ag0401 WARNING . NEVER INSTALL A REARWARDFACING CHILD RESTRAINT SYSTEM ON THE FRONT PASSENGER’S SEAT. DOING SO RISKS SERIOUS INJURY OR DEATH TO THE CHILD BY PLACING THE CHILD’S HEAD TOO CLOSE TO THE SRS AIRBAG. . Before installing a child restraint system, be sure to confirm that the seatback is securely locked into place. Otherwise, in an accident, serious injury or death could result. – CONTINUED – Child Restraint Systems 61 1 Seat, Seatbelt and SRS Airbags 1. Place the child restraint system in the rear seating position. WARNING When you intend to install a child restraint system in the rear center seating position, if the child restraint system does not fit snugly against the contours of the rear center seat cushion, install the child restraint system in the window-side seating position to be safe. 2. Run the lap and shoulder belt through or around the child restraint system following the instructions provided by its manufacturer. 3. Insert the tongue plate into the buckle until you hear a click. 4. Take up the slack in the lap belt. 5. If using the seatbelt in the ALR mode is recommended by the manufacturer’s instructions supplied with the child restraint system, perform the following procedure. (1) Pull out the seatbelt fully from the retractor to change the retractor over from the Emergency Locking Retractor (ELR) to the Automatic Locking Retractor (ALR) mode. (2) Allow the belt to rewind into the retractor. As the belt is rewinding, clicks will be heard which indicate the retractor functions as ALR. 6. Before having a child sit in the child restraint system, try to move it back and forth and right and left to check if it is firmly secured. Sometimes a child restraint system can be more firmly secured by pushing it down into the seat cushion and then tightening the seatbelt. It should not be possible to move the child restraint system more than 1 in (2.5 cm) in any direction along the seatbelt path. 7. If the seatbelt has been set to the ALR mode in step 5, pull at the shoulder portion of the belt to confirm that it cannot be pulled out (ALR properly functioning). 62 Child Restraint Systems 8. To remove the child restraint system, press the release button on the seatbelt buckle and allow the belt to retract completely. The belt will return to the ELR mode. NOTE When the child restraint system is no longer in use, remove it and restore the ELR function of the retractor. That function is restored by allowing the seatbelt to retract fully. ! Installing a forward facing child restraint system s01ag0402 WARNING . NEVER INSTALL A CHILD RESTRAINT SYSTEM ON THE FRONT PASSENGER’S SEAT IF THE FRONT PASSENGER’S FRONTAL AIRBAG ON INDICATOR ILLUMINATES. DOING SO RISKS SERIOUS INJURY OR DEATH TO THE CHILD BY PLACING THE CHILD’S HEAD TOO CLOSE TO THE SRS AIRBAG. . Before installing a child restraint system, be sure to confirm that the seatback is securely locked into place. Otherwise, in an accident, serious injury or death could result. 1. Place the child restraint system in the rear seating position. 2. If the child restraint system makes contact with the head restraint of the rear seating position where the child restraint system is to be installed, perform the following procedure. – Except rear center seat: Remove the head restraint. – Rear center seat: Raise the head restraint to the extended position. If the child restraint system still makes contact, install the child restraint system in a seating position other than the rear center seat. For details, refer to “Head Restraint Adjustment” P39. – CONTINUED – Child Restraint Systems 63 1 Seat, Seatbelt and SRS Airbags CAUTION Store the removed head restraint in the cargo area. Do not place the head restraint in the passenger compartment to prevent it from being thrown around in the passenger compartment in a sudden stop or a sharp turn. WARNING When you intend to install a child restraint system in the rear center seating position, if the child restraint system does not fit snugly against the contours of the rear center seat cushion, install the child restraint system in the window-side seating position to be safe. 3. Run the lap and shoulder belt through or around the child restraint system following the instructions provided by its manufacturer. – When a child restraint system is installed on the rear center seating position, pass the rear center seatbelt through the belt guide properly. For details, refer to “Rear center seatbelt” P46. 4. Insert the tongue plate into the buckle until you hear a click. 5. Take up the slack in the lap belt. 6. Pull out the seatbelt fully from the retractor to change the retractor over from the Emergency Locking Retractor (ELR) to the Automatic Locking Retractor (ALR) function. Then, allow the belt to rewind into the retractor. As the belt is rewinding, clicks will be heard which indicate the retractor functions as ALR. 64 Child Restraint Systems 7. Before having a child sit in the child restraint system, try to move it back and forth and right and left to check if it is firmly secured. Sometimes a child restraint system can be more firmly secured by pushing it down into the seat cushion and then tightening the seatbelt. It should not be possible to move the child restraint system more than 1 in (2.5 cm) in any direction along the seatbelt path. 8. Pull at the shoulder portion of the belt to confirm that it cannot be pulled out (ALR properly functioning). 9. Attach the tether hook onto the tether anchorage and tighten the tether strap firmly. For additional instructions, refer to “Tether Anchorages” P72. 10. To remove the child restraint system, press the release button on the seatbelt buckle and allow the belt to retract completely. The belt will return to the ELR mode. If you have installed a child restraint system for the rear center seating position, when you remove the child restraint system, the seatbelt may not be restored to the ELR mode even if the seatbelt is retracted. In this case, lower the head restraint to the retracted position to allow the seatbelt to retract moreover. The seatbelt will return to the ELR mode. Remember that the head restraint is not intended to be used at the lowest position (retracted position). Therefore, when the rear center seat is occupied (including when a child restraint system is installed) next time, be sure to raise the head restraint to the extended position. NOTE When the child restraint system is no longer in use, remove it and restore the ELR function of the retractor. That function is restored by allowing the seatbelt to retract fully. – CONTINUED – Child Restraint Systems 65 1 Seat, Seatbelt and SRS Airbags & Installing a Booster Seat or Booster Cushion s01ag05 WARNING NEVER INSTALL A BOOSTER SEAT/ CUSHION ON THE FRONT PASSENGER’S SEAT IF THE FRONT PASSENGER’S FRONTAL AIRBAG ON INDICATOR ILLUMINATES. DOING SO RISKS SERIOUS INJURY OR DEATH TO THE CHILD BY PLACING THE CHILD’S HEAD TOO CLOSE TO THE SRS AIRBAG. Booster seat Booster cushion 1. Adjust the head restraint as follows. For booster seat: If the booster seat makes contact with the head restraint of the rear seating position where the booster seat is to be installed, perform the following procedure. – Except rear center seat: Remove the head restraint. – Rear center seat: Raise the head restraint to the extended position. If the booster seat still makes contact, install the child restraint system in a seating position other than the rear center seat. For details, refer to “Head Restraint Adjustment” P39. CAUTION Store the removed head restraint in the cargo area. Do not place the head restraint in the passenger compartment to prevent it from being thrown around in the passenger compartment in a sudden stop or a sharp turn. For booster cushion: Raise the head restraint to the extended position. Do not remove the head restraint. 66 Child Restraint Systems 2. Place the booster seat/cushion in the rear seating position and sit the child on it. The child should sit well back on the booster seat/cushion. 3. Run the lap and shoulder belt through or around the booster seat/cushion and the child following the instructions provided by its manufacturer. For booster seat/cushion with a belt guide, use the seatbelt through the belt guide. 4. Insert the tongue plate into the buckle until you hear a click. Take care not to twist the seatbelt. Make sure the shoulder belt is positioned across the center of child’s shoulder and that the lap belt is positioned as low as possible on the child’s hips. 5. To remove the booster seat/cushion, press the release button on the seatbelt buckle and allow the belt to retract. WARNING . Never use a belt that is twisted or reversed. In an accident, this can increase the risk or severity of injury to the child. . Never place the shoulder belt under the child’s arm or behind the child’s back. If an accident occurs, this can increase the risk or severity of injury to the child. . The seatbelt should fit snugly in order to provide full restraint. Loose fitting belts are not as effective in preventing or reducing injury. . Place the lap belt as low as possible on the child’s hips. A high-positioned lap belt will increase the risk of sliding under the lap belt and of the lap belt sliding up over the abdomen, and both can result in serious injury or death. . Make sure the shoulder belt is positioned across the center of child’s shoulder. Placing the shoulder belt over the neck may result in neck injury during sudden braking or in a collision. – CONTINUED – Child Restraint Systems 67 1 Seat, Seatbelt and SRS Airbags & Installation of Child Restraint Systems by Use of Lower and Tether Anchorages (LATCH) s01ag07 ! Lower and tether anchorages s01ag0701 WARNING . Attach the child restraint system to the anchors properly. When using the LATCH anchors, be sure that there are no foreign objects around the anchors. Make sure the child restraint system is securely attached. Otherwise it may cause death or serious injury to children or other passengers in sudden braking, swerving, or accidents. . When installing a child restraint system using LATCH anchors with the rear seatbelt fastened, ensure that the rear seatbelt does not become caught in the child restraint system or the lower LATCH anchorages. NOTE The seatbelt warning system of the rear seats detects if any of the seats are occupied by a passenger. Installing a child restraint system in the rear seating area, using the LATCH anchors, may result in the activation of the passenger seatbelt warning light and chime. Fastening the rear seatbelt prior to installing the child restraint system will avoid activating the passenger seatbelt warning light and chime. For details, refer to “Rear passenger’s seats” P159. Some types of child restraint systems can be installed on the rear seat of your vehicle without use of the seatbelts. Such child restraint systems are secured to the dedicated anchorages provided on the vehicle body. The lower and tether anchorages are sometimes referred to as the LATCH system (Lower Anchors and Tethers for CHildren). Your vehicle is equipped with 5 lower anchorages (U.S.-spec. models), 4 lower anchorages (other models) and 3 tether anchorages for accommodating such child restraint systems. 68 Child Restraint Systems ! Lower anchorages s01ag070101 U.S.-spec. models WARNING Do not connect two or more lower hooks onto the same anchorage (bar). There are a total of 5 lower anchorages at the rear seat. The second lower anchorage from the right side is used for both the right seat and center seat. Each lower anchorage is located where the seat cushion meets the seatback. Canada-spec. models WARNING Do not connect two or more lower hooks onto the same anchorage (bar). 2 lower anchorages are provided for installing a child restraint system in the rear seat window-side seating positions. Lower anchorages for window-side seating positions may be used for a seat in the center seating position if a child restraint system manufacturer’s instructions permit and specify using anchors as far apart as those in this vehicle. Each lower anchorage is located where the seat cushion meets the seatback. ! Tether anchorages s01ag070102 1 For left seat 2 For center seat 3 For right seat The tether anchorages are provided at the locations shown in the above illustration. – CONTINUED – Child Restraint Systems 69 1 Seat, Seatbelt and SRS Airbags For details, refer to “Tether Anchorages” P72. ! To install a child restraint system using lower and tether anchorages s01ag070103 WARNING Before installing a child restraint system, be sure to confirm that the seatback is securely locked into place. Otherwise, in an accident, serious injury or death could result. 1. Move the seatback back and forth to confirm that it is securely locked into place. – Check that the red colored unlocking marker on the lock release knob is not visible. For details, refer to “Folding Down the Rear Seatback” P37. U.S.-spec. models Canada-spec. models 2. You will find “ ” marks at the bottoms of the rear seatback. These marks indicate the positions of the lower anchorages. Each lower anchorage is located behind the cover of seatback bottom. CAUTION When you install a child restraint system, follow the manufacturer’s instructions supplied with it. After installing the child restraint system, check to ensure that it is held securely in position. If it is not held tight and secure, the danger of your child suffering personal injury in the event of an accident may be increased. Peel off the anchorage cover completely from the selected side of the rear seatback to expose the lower anchorages to be used for installation of the child restraint system. 70 Child Restraint Systems If it is hard to install the child restraint system because the anchorage cover returns to the original position, press the anchorage cover to the seat cushion until it is flat. 3. If the child restraint system makes contact with the head restraint of the rear seating position where the child restraint system is to be installed, perform the following procedure. – Except rear center seat: Remove the head restraint. – Rear center seat: Raise the head restraint to the extended position. If the child restraint system still makes contact, remove the head restraint. For details, refer to “Head Restraint Adjustment” P39. CAUTION Store the removed head restraint in the cargo area. Do not place the head restraint in the passenger compartment to prevent it from being thrown around in the passenger compartment in a sudden stop or a sharp turn. 4. While following the instructions supplied by the child restraint system manufacturer, connect the lower hooks onto the lower anchorages located at “ ” marks on the bottom of the rear seatback. When the hooks are connected, make sure the adjacent seatbelts are not caught. 5. If your child restraint system is a flexible attachment type (which uses tether belts), push the child restraint system into the seat cushion and pull both left and right lower tether belts up to secure the child restraint system by taking up the slack in the belt. 6. Attach the tether hook onto the tether anchorage and tighten the tether strap firmly. For additional instructions, refer to “Tether Anchorages” P72. – CONTINUED – Child Restraint Systems 71 1 Seat, Seatbelt and SRS Airbags 7. Before having a child sit in the child restraint system, try to move it back and forth and right and left to check if it is firmly secured. Sometimes a child restraint system can be more firmly secured by pushing it down into the seat cushion. It should not be possible to move the child restraint system more than 1 in (2.5 cm). 8. To remove the child restraint system, follow the reverse procedures of installation. SUBARU recommends that you check with a certified Child Passenger Safety Technician to ensure the proper installation of your child restraint system. For more information, and to locate the closest inspection location in the U.S., refer to the National Highway Traffic Safety Administration (NHTSA) website. In Canada, check with Transport Canada. & Tether Anchorages s01ag09 Your vehicle is equipped with 3 tether anchorages so that a child restraint system having a tether can be installed in the rear seat. When installing a child restraint system using tether, proceed as follows, while observing the instructions by the child restraint system manufacturer. Since a tether can provide additional stability by offering another connection between a child restraint system and the vehicle, we recommend that you use a tether whenever one is required or available. ! Tether anchorage location s01ag0901 1 For left seat 2 For center seat 3 For right seat Three tether anchorages are installed on the rear shelf behind the rear seat head 72 Child Restraint Systems restraint. ! To hook the tether s01ag0902 CAUTION . Except for the center seating position, remove the head restraint when mounting a child restraint system. Otherwise, it might be possible that the tether anchorage cannot be fastened tightly. . Store the head restraint that has been removed in the cargo area. Do not place the head restraint in the passenger compartment to prevent it from being thrown around in the passenger compartment in a sudden stop or a sharp turn. . For the center seating position, raise the center head restraint to the extended position when mounting a child restraint system. Otherwise, it will be impossible to use the seatbelt guide that is attached to the head restraint correctly. The seatbelt guide is essential for routing the belt webbing at the center seating position. For information about using the seatbelt guide, refer to “Rear center seatbelt” P46. 1. Attach the tether hook to the appropriate top tether anchorage. For the center seating position, route the tether strap under the head restraint as illustrated below. 1 Seatbelt guide 2 Seatbelt of the center seating position 3 Tether strap 2. Tighten the top tether strap securely. SUBARU recommends that you check with a certified Child Passenger Safety Technician to ensure the proper installation of your child restraint system. For more information, and to locate the closest inspection location in the U.S., refer to the National Highway Traffic Safety Administration (NHTSA) website. In Canada, check with Transport Canada. Child Restraint Systems 73 1 Seat, Seatbelt and SRS Airbags 1-9. SRS Airbag (Supplemental Restraint System Airbag) s01ah Supplemental Restraint System (SRS) name is used because the airbag system supplements the vehicle’s seatbelts. Your vehicle is equipped with a supplemental restraint system in addition to a lap/ shoulder belt at each front seating position and each rear window-side seating positions. The system also controls seatbelt pretensioners. For operation instructions and precautions concerning the seatbelt pretensioner, refer to “Seatbelt Pretensioners” P52. & General Precautions Regarding SRS Airbag System s01ah10 WARNING To obtain maximum protection in the event of an accident, the driver and all passengers must always wear seatbelts when in the vehicle. The SRS airbags are designed only to be a supplement to the primary protection provided by the seatbelt. They do not eliminate the need to fasten seatbelts. Used in combination with the seatbelts, the SRS airbag offers vehicle occupants the best possible protection in the event of a serious accident. Not wearing a seatbelt increases the chance of severe injury or death in a crash even when the vehicle has the SRS airbag. For instructions and precautions concerning the seatbelt system, refer to “Seatbelts” P41. WARNING The SRS airbags deploy with considerable speed and force. Occupants who are not seated in the proper upright position when the SRS airbag deploys could suffer very serious injuries. Because the SRS airbag needs enough space for deployment, the driver should always sit upright and well back in the seat as far from the steering wheel as practical while still maintaining full vehicle control, and the front passenger should move the seat as far back as possible and sit upright and well back in the seat. WARNING . Do not sit or lean close to either front door. The SRS side airbags are stored in both front seat seatbacks next to the door, and they provide protection by de- 74 SRS Airbag (Supplemental Restraint System Airbag) ploying rapidly in the event of a side impact or an offset frontal collision. However, the force of SRS side airbag deployment can injure an occupant if they are too close to an SRS airbag. . Since this vehicle is equipped with SRS curtain airbags, do not sit or lean close to the front or rear door on either side. Do not put body parts out of the window. The SRS curtain airbags on both sides of the cabin are stored in the roof side (between the front pillar and a point behind the rear quarter glass), and they provide protection by deploying rapidly in the event of a side impact, rollover or an offset frontal collision. However, the force of its deployment can injure an occupant if they are too close to an SRS airbag. . Do not sit or lean close to the SRS airbag. Because the SRS airbag deploys with considerable speed and force to protect in high speed collisions, the force of an airbag can injure an occupant whose body is too close to SRS airbag. It is also important to wear a seatbelt to help avoid injuries that can result when the SRS airbag contacts an occupant who is not seated in the proper upright position. Even when properly positioned, there remains a possibility that an occupant may suffer minor injuries, such as abrasions and bruises to the face or arms, because of the SRS airbag deployment force. WARNING . Keep arms away from either door or its internal trim. Vehicle occupants could be injured in the event of SRS side airbag deployment. . Do not place any objects over or near the SRS airbag cover or between you and the SRS airbag. If the SRS airbag deploys, these objects could interfere with its proper operation and could be propelled inside the vehicle, causing injury. CAUTION . When the SRS airbag deploys, some smoke will be released. This smoke could cause breathing problems for people with a history of asthma or other breathing trouble. If you or your passengers have breathing problems after SRS airbag deploys, get fresh air promptly. . A deploying SRS airbag releases hot gas. Occupants could get burned if they come into direct contact with the hot gas. NOTE . When you sell your vehicle, we urge you to inform the buyer that the vehicle is equipped with SRS air- – CONTINUED – SRS Airbag (Supplemental Restraint System Airbag) 75 1 Seat, Seatbelt and SRS Airbags bags. Also, notify the buyer of the applicable section in this Owner’s Manual. . If the SRS airbag deploys, fuel supply will be cut off to reduce the risk of fire caused by leaking fuel. For details about restarting of the engine, refer to “If Your Vehicle Is Involved in an Accident” P445. & General Precautions Regarding SRS Airbag System for Accessories and Any Objects s01ah13 WARNING . Do not put any objects (including straps or cords) over the steering wheel pad, column cover, or dashboard. – These objects could be entangled with the steering wheel, preventing the SRS frontal airbag, etc. from operating properly. – If the SRS frontal airbag deploys, these objects could be propelled inside the vehicle, causing injury. . Do not put any objects under the driver’s side of the instrument panel. If the SRS knee airbag deploys, those objects could interfere with its proper operation and could be propelled inside the vehicle, causing injury. . The key must not be attached to heavy, sharp or hard accessories, or another key. If the SRS knee airbag deploys, those objects could interfere with its proper operation and could be propelled inside the vehicle and cause injury. WARNING Do not attach accessories to the windshield, or fit an extra-wide mirror over the inside rear view mirror. If 76 SRS Airbag (Supplemental Restraint System Airbag) the SRS airbag deploys, those objects could become projectiles that could seriously injure vehicle occupants. WARNING . Do not attach accessories to the door trim or near either SRS side airbags and do not place objects near the SRS side airbags. In the event of SRS side airbag deployment, they could be propelled dangerously toward the vehicle’s occupants and cause injuries. . Do not attach a hands-free microphone or any other accessory to a front pillar, a center pillar, a rear pillar, the windshield, a side window, an assist grip, or any other cabin surface that would be near a deploying SRS curtain airbag. A hands-free microphone or other accessory in such a location could be propelled through the cabin with great force by the curtain airbag, or it could prevent correct deployment of the curtain airbag. In either case, the result could be serious injuries. . Never hang or place coat hangers or other hard or pointed objects near the side windows. If such items are present when the SRS curtain airbags deploy, they could be thrown through the passenger compartment and cause serious injuries. They could also prevent proper operation of the SRS curtain airbags. WARNING Do not hang coat hangers or other hard or pointed objects on the coat hooks. If such items were hanging on the coat hooks during deployment of the SRS curtain airbags, they could cause serious injuries by coming off the coat hooks and being thrown through the cabin or by preventing deployment of the curtain airbags. Before hanging clothing on the coat hooks, make sure there are no sharp objects in the pockets. Hang clothing directly on the coat hooks without using hangers. – CONTINUED – SRS Airbag (Supplemental Restraint System Airbag) 77 1 Seat, Seatbelt and SRS Airbags WARNING . Do not put any kind of clothes or other objects over the driver’s seat and front passenger’s seatback and do not attach labels or stickers to the driver’s seat and front passenger’s seat surface on or near the SRS side airbag or the SRS seat cushion airbag. They could prevent proper deployment of the SRS side airbag or the SRS seat cushion airbag, reducing protection available to the occupant of the driver’s seat or the front passenger’s seat. . Do not install a seat cover unless it is a genuine SUBARU seat cover exclusively designed for use with the SRS airbag. Even when using a genuine SUBARU seat cover, the SRS side airbag or the SRS seat cushion airbag may not function normally if the seat cover is not installed correctly. & General Precautions Regarding SRS Airbag System and Children s01ah14 WARNING SUBARU strongly recommends that ALL infants and children (including those in child restraint systems) sit in the REAR seat properly restrained in a child restraint system or in a seatbelt, whichever is appropriate for the child’s age, height and weight. The SRS airbag deploys with considerable speed and force and can injure or even kill children, especially if they are not restrained or improperly restrained. Because children are lighter and weaker than adults, their risk of being injured from deployment is greater. According to accident statistics, children are safer when properly restrained in the rear seating positions than in the front seating positions. For instructions and precautions concerning child restraint systems, refer to “Child Restraint Systems” P56. 78 SRS Airbag (Supplemental Restraint System Airbag) WARNING NEVER INSTALL A REARWARD-FACING CHILD RESTRAINT SYSTEM ON THE FRONT PASSENGER’S SEAT, AND NEVER INSTALL A FORWARD- FACING CHILD RESTRAINT SYSTEM ON THE FRONT PASSENGER’S SEAT IF THE FRONT PASSENGER’S FRONTAL AIRBAG ON INDICATOR ILLUMINATES. DOING SO RISKS SERIOUS INJURY OR DEATH TO THE CHILD BY PLACING THE CHILD’S HEAD TOO CLOSE TO THE SRS AIRBAG. WARNING Never allow a child to stand up or kneel on the front passenger’s seat. The SRS airbag deploys with considerable force and can injure or even kill the child. WARNING Never hold a child on your lap or in your arms. The SRS airbag deploys with considerable force and can injure or even kill the child. – CONTINUED – SRS Airbag (Supplemental Restraint System Airbag) 79 1 Seat, Seatbelt and SRS Airbags WARNING . Never allow a child to do the following. – Kneel on any passenger’s seat facing the side window. – Wrap his/her arms around the front seat seatback. – Put his/her head, arms or other parts of the body out of the window. In the event of an accident, the force of SRS side airbag and/or SRS curtain airbag deployment could injure the child seriously because his/her head, arms or other parts of the body are too close to the SRS side airbag and/ or SRS curtain airbag. . Since your vehicle is also equipped with a front passenger’s SRS frontal airbag, children and infants should be placed on the rear seat anyway and should be properly restrained at all times. 80 SRS Airbag (Supplemental Restraint System Airbag) & Components s01ah11 The SRS airbags are stowed in the following locations. 1 Driver’s SRS frontal airbag: in the center portion of the steering wheel 2 Front passenger’s SRS frontal airbag: near the top of the dashboard 3 SRS side airbag: in the door side of each front seat seatback 4 SRS curtain airbag: in the roof side (between the front pillar and a point over the rear seat) 5 SRS knee airbag: under the steering column 6 SRS seat cushion airbag: in the front passenger’s seat cushion – CONTINUED – SRS Airbag (Supplemental Restraint System Airbag) 81 1 Seat, Seatbelt and SRS Airbags 1 Airbag control module (including impact sensor and rollover sensor) 2 Frontal airbag module (driver’s side) 3 Frontal airbag module (front passenger’s side) 4 Front impact sensor (left-hand side) 5 Front impact sensor (right-hand side) 6 Side airbag module (driver’s side) 7 Side airbag module (front passenger’s side) 8 Side impact sensor (center pillar lefthand side) 9 Side impact sensor (center pillar righthand side) 10 Airbag wiring 11 Seatbelt pretensioner (driver’s side) 12 Seatbelt pretensioner and adaptive force limiter (front passenger’s side) 13 Side impact sensor (rear wheel house right-hand side) 14 Side impact sensor (rear wheel house left-hand side) 15 Curtain airbag module (right-hand side) 16 Curtain airbag module (left-hand side) 17 Seatbelt buckle switch (front passenger’s side) 18 Knee airbag module (driver’s side) 19 Front passenger’s occupant detection sensors 20 Front passenger’s frontal airbag ON and OFF indicator light 21 SRS airbag system warning light 22 Side impact sensor (under the rear center seat) 23 Side impact sensor (front door left-hand side) 24 Side impact sensor (front door right-hand side) 25 Lap belt pretensioner (driver’s side) 26 Rear seatbelt pretensioner (front passenger’s side) 27 Rear seatbelt pretensioner (driver’s side) 28 Seat cushion airbag module (front passenger’s side) 82 SRS Airbag (Supplemental Restraint System Airbag) & SUBARU Advanced Frontal Airbag System s01ah02 This vehicle is equipped with a SUBARU advanced frontal airbag system that complies with the new advanced frontal airbag requirements in the amended Federal Motor Vehicle Safety Standard (FMVSS) No. 208. The SUBARU advanced frontal airbag system automatically determines the deployment force of the driver’s SRS frontal airbag at the time of deployment as well as whether or not to activate the front passenger’s SRS frontal airbag and, if activated, the deployment force of the SRS frontal airbag at the time of deployment. This vehicle has warning labels on the driver’s and front passenger’s sun visors beginning with the phrase “EVEN WITH ADVANCED AIR BAGS” and a tag attached to the glove box lid beginning with the phrase “Even with Advanced Air Bags”. Make sure that you carefully read the instructions on the warning labels and tag. Always wear your seatbelt. The SUBARU advanced frontal airbag system is a supplemental restraint system and must be used in combination with a seatbelt. All occupants should wear a seatbelt or be seated in an appropriate child restraint system. For the locations of the SRS airbags, refer to “Components” P81. In a moderate to severe frontal collision, the following components deploy. . SRS frontal airbag for driver . SRS frontal airbag for front passenger . SRS seat cushion airbag for front passenger . SRS curtain airbag*1 . SRS side airbag*1 . SRS knee airbag for driver *1: When an offset frontal collision that is severe enough to deploy the front airbag occurs. These components supplement the seatbelts by reducing the impact to the occupant’s head, chest and knees. NOTE Only driver’s SRS frontal airbag and front passenger’s SRS frontal airbag are controlled by the SUBARU advanced frontal airbag system. ! Driver’s SRS frontal airbag s01ah0201 The driver’s SRS frontal airbag uses a dual stage inflator. The inflator operates in different ways depending on the severity of impact. ! Front passenger’s SRS frontal airbag s01ah0202 The front passenger’s SRS frontal airbag uses a dual stage inflator. The inflator operates in different ways depending on the severity of impact. 1 Occupant detection sensors – CONTINUED – SRS Airbag (Supplemental Restraint System Airbag) 83 1 Seat, Seatbelt and SRS Airbags The occupant detection sensors are installed between the seat and seat rails, and monitor the physique and posture of the front passenger. Using this information, the occupant detection system determines whether the front passenger’s SRS frontal airbag should be deployed or not. The occupant detection system may not inflate the front passenger’s SRS frontal airbag even when the driver’s SRS frontal airbag deploys. This is normal. In this case, although the front passenger’s SRS frontal airbag does not operate, the front passenger’s seatbelt pretensioner operates with the driver’s seatbelt pretensioner. For details about the seatbelt pretensioner, refer to “Seatbelt Pretensioners” P52. CAUTION Observe the following precautions. Failure to do so may prevent the SUBARU advanced frontal airbag system from functioning correctly or cause the system to fail. . Do not apply any strong impact to the front passenger’s seat such as by kicking. . Do not let rear passengers rest their feet between the front seatback and seat cushion. . Do not spill liquid on the front passenger’s seat. If liquid is spilled, wipe it off immediately. . Do not remove or disassemble the front passenger’s seat. . Do not install any accessory (such as an audio amplifier) other than a genuine SUBARU accessory under the front passenger’s seat. . Do not place anything (shoes, umbrella, etc.) under the front passenger’s seat. . Do not place any objects (books, etc.) around the front passenger’s seat. . Do not use the front passenger’s seat with the head restraint removed. . Do not leave any articles on the front passenger’s seat or the seatbelt tongue and buckle engaged when you leave your vehicle. . Do not put sharp object(s) on the seat or pierce the seat upholstery. . Do not place a magnet near the seatbelt buckle and the seatbelt retractor. . Do not use front seats with their backward-forward position and seatback not being locked into place securely. If any of them are not locked securely, adjust them again. For adjusting procedure, refer to “Manual Seat” P33 (models equipped with manual seats only). SRS airbag system warning light If the seatbelt buckle switch and/or front passenger’s occupant detection system have failed, the SRS airbag system warning light will illuminate. If the SRS airbag system warning light illuminates, immediately stop the vehicle in a safe place, and consult a SUBARU dealer. If your vehicle has sustained impact, this 84 SRS Airbag (Supplemental Restraint System Airbag) may affect the proper function of the SUBARU advanced frontal airbag system. Have your vehicle inspected at your SUBARU dealer. Do not use the front passenger’s seat while driving the vehicle to your SUBARU dealer. ! Passenger’s frontal airbag ON and OFF indicators s01ah0203 : Front passenger’s frontal airbag ON indicator light : Front passenger’s frontal airbag OFF indicator light Refer to “Front Passenger’s Frontal Airbag ON and OFF Indicators Light” P160. ! Occupant detection system s01ah0209 1 Occupant detection sensors The occupant detection sensors are installed between the seat and seat rails, and monitor the physique and posture of the front passenger. Using this information, the occupant detection system determines whether the following airbags should be deployed or not. . Front passenger’s SRS frontal airbag . Front passenger’s SRS seat cushion airbag WARNING Do not kick the front passenger seat or subject it to severe impact. Otherwise, the SRS airbag system warning light may illuminate to indicate a malfunction of the front passenger occupant detection system. In this case, immediately stop the vehicle in a safe place, and consult a SUBARU dealer. : Front passenger’s frontal airbag ON indicator light : Front passenger’s frontal airbag OFF indicator light If the front passenger’s frontal airbag ON and OFF indicator lights do not work properly, do not allow anyone to sit on the front passenger’s seat and have the occupant detection system checked by your SUBARU dealer. – CONTINUED – SRS Airbag (Supplemental Restraint System Airbag) 85 1 Seat, Seatbelt and SRS Airbags : Front passenger’s frontal airbag ON indicator light : Front passenger’s frontal airbag OFF indicator light Also, if luggage is placed on the front passenger’s seat, this may adversely affect the ability of the system to determine deployment. This may prevent the front passenger’s frontal airbag ON and OFF indicator lights from working properly. Check that the indicators work properly. When the OFF indicator turns off and the ON indicator illuminates, the front passenger’s frontal airbag may deploy during a collision. Remove luggage from the front passenger’s seat. ! Conditions in which front passenger’s SRS frontal airbag is not activated s01ah0204 The front passenger’s SRS frontal airbag will not be activated when any of the following conditions are met regarding the front passenger’s seat: . The seat is empty. . The seat is equipped with an appropriate child restraint system and an infant or a child is restrained in it. (See WARNING that follows.) . The front passenger’s occupant detection system is malfunctioning. WARNING NEVER INSTALL A REARWARD-FACING CHILD RESTRAINT SYSTEM ON THE FRONT PASSENGER’S SEAT EVEN IF THE FRONT PASSENGER’S SRS FRONTAL AIRBAG IS DEACTIVATED. Be sure to install it correctly in the REAR seat. Also, it is strongly recommended that any child seat or booster seat be installed in the REAR seat, and that even children who have outgrown a child restraint system be also seated in the REAR seat. This is because children sitting in the front passenger’s seat may be killed or severely injured should the front passenger’s SRS frontal airbag deploy. REAR seats are the safest place for children. CAUTION When the front passenger’s seat is occupied by an infant in an appropriate child restraint system, observe the following precautions. Failure to do so may interfere with the proper operation of the occupant detection system, activating the front passenger’s SRS frontal airbag even though that seat is occupied by the infant in the child restraint system. . Do not place any article on the seat other than the infant in the child restraint system. . Do not place more than one infant in the child restraint system. . Do not install any accessory such as a table or TV onto the seatback. . Do not store a heavy load in the seatback pocket. . Do not allow the rear seat occupant to place his/her hands or 86 SRS Airbag (Supplemental Restraint System Airbag) legs on the front passenger’s seatback, or allow him/her to pull the seatback. ! If the front passenger’s frontal airbag ON indicator light illuminates and the OFF indicator light turns off even when an infant or a small child is in a child restraint system (including booster seat) s01ah020401 : Front passenger’s frontal airbag ON indicator light : Front passenger’s frontal airbag OFF indicator light 1. Turn the ignition switch to the “LOCK”/ “OFF” position. 2. Remove the child restraint system from the seat. 3. By referring to the child restraint manufacturer’s recommendations as well as the child restraint system installation procedures in “Child Restraint Systems” P56, correctly install the child restraint system. 4. Turn the ignition switch to the “ON” position and make sure that the front passenger’s frontal airbag ON indicator light turns off and the OFF indicator light illuminates. If still the ON indicator remains illuminated while the OFF indicator turns off, take the following actions. . Ensure that no article is placed on the seat other than the child restraint system and the child occupant. . Ensure that the backward-forward position and seatback of front passenger’s seat are locked into place securely by moving the seat back and forth. . Ensure that there is no article left in the seatback pocket. If the ON indicator still remains illuminated while the OFF indicator turns off after taking the relevant corrective actions described above, relocate the child restraint system to the rear seat and immediately contact your SUBARU dealer for an inspection. NOTE When a child who has outgrown a child restraint system or a small adult is seated in the front passenger’s seat, the SUBARU advanced frontal airbag system may or may not activate the front passenger’s SRS frontal airbag depending on the occupant’s seating posture. Children should always wear a seatbelt when sitting in the seat irrespective of whether the airbag is deactivated or activated. If the front passenger’s SRS frontal airbag is activated (the ON indicator remains illuminated while the OFF indicator turns off), take the following action. . Ensure that no article is placed on the seat other than the occupant. If the ON indicator still remains illuminated while the OFF indicator turns off despite the fact that the actions noted above have been taken, seat the child in the rear seat and immediately contact your SUBARU dealer for an inspection. Even if the system has passed the dealer inspection, it is recommended that on subsequent trips the child always take the rear seat. – CONTINUED – SRS Airbag (Supplemental Restraint System Airbag) 87 1 Seat, Seatbelt and SRS Airbags Children who have outgrown a child restraint system should always wear the seatbelt irrespective of whether the airbag is deactivated or activated. ! Conditions in which front passenger’s SRS frontal airbag is activated s01ah0205 The front passenger’s SRS frontal airbag will be activated for deployment upon impact when any of the following conditions are met regarding the front passenger’s seat. . When the seat is occupied by an adult. . When certain items (e.g. jug of water) are placed on the seat. When the front passenger’s seat is occupied by an adult, observe the following precautions. Failure to do so may lessen the load on the front passenger’s seat, deactivating the front passenger’s SRS frontal airbag despite the fact that the seat is occupied by an adult. This may result in personal injury. . Do not allow the rear seat occupant to lift the front passenger’s seat cushion using his/her feet. . Do not place any article under the front passenger’s seat, or squeeze any article from behind and under the seat. This may lift the seat cushion. . Do not squeeze any article between the front passenger’s seat and side trim/ pillar, door or center console box. This may lift the seat cushion. ! If the passenger’s frontal airbag OFF indicator illuminates and the ON indicator turns off even when the front passenger’s seat is occupied by an adult s01ah020501 : Front passenger’s frontal airbag ON indicator light : Front passenger’s frontal airbag OFF indicator light This can be caused by the adult incorrectly sitting in the front passenger’s seat. 1. Turn the ignition switch to the “LOCK”/ “OFF” position. 2. Ask the front passenger to set the seatback to the upright position, sit up straight in the center of the seat cushion, correctly fasten the seatbelt, position his/her legs out forward, and adjust the seat to the rearmost position. 3. Turn the ignition switch to the “ON” position. If the OFF indicator remains illuminated while the ON indicator remains off, take the following actions. 1. Turn the ignition switch to the “LOCK”/ “OFF” position. 2. Make sure that the front passenger does not use a blanket, extra seat cushion, seat cover, seat heater or massager, etc. 3. If wearing excessive layers of clothing, the front passenger should remove any unnecessary items before sitting in the front passenger’s seat, or should sit in a rear seat. 4. Turn the ignition switch to the “ON” position and wait 6 seconds to allow the system to complete self-checking. Following the system check, both indicators turn off for 2 seconds. Now, the ON indicator should illuminate while the OFF indicator remains off. 88 SRS Airbag (Supplemental Restraint System Airbag) If the OFF indicator still remains illuminated while the ON indicator remains off, ask the occupant to move to the rear seat and immediately contact your SUBARU dealer for an inspection. – CONTINUED – SRS Airbag (Supplemental Restraint System Airbag) 89 1 Seat, Seatbelt and SRS Airbags ! Operation s01ah0207 A Driver’s side B Passenger’s side 1 SRS AIRBAGs deploy as soon as a collision occurs. 2 After deployment, SRS AIRBAGs start to deflate immediately so that the driver’s vision is not obstructed. The SRS airbags can function only when the ignition switch is in the “ON” position. The SUBARU advanced frontal airbag system is designed to determine the activation or deactivation condition of the front passenger’s SRS frontal airbag depending on the characteristic of item(s) or person on the front passenger’s seat monitored by the front passenger’s occupant detection sensors. For this reason, only the driver’s SRS frontal airbag may deploy in the event of a collision, but this does not mean failure of the system. If the following sensors detect a predetermined amount of force during a frontal collision, the control module sends signals to the airbag module(s) (only driver’s module or both driver’s and front passenger’s modules) instructing the module(s) to inflate the SRS frontal airbag(s). 90 SRS Airbag (Supplemental Restraint System Airbag) . The front impact sensors . The impact sensors in the airbag control module On the driver’s side, the SRS knee airbag also inflates with the SRS frontal airbag. ! After deployment s01ah0210 After deployment, the SRS airbag immediately starts to deflate so that the driver’s vision is not obstructed and the driver’s ability to maintain control of the vehicle is not impaired. When the SRS airbag deploys, a sudden, fairly loud inflation noise will be heard and some smoke will be released. These occurrences are a normal result of the deployment. This smoke does not indicate a fire in the vehicle. CAUTION Do not touch the SRS airbag system components around the steering wheel and dashboard with bare hands right after deployment. Doing so can cause burns because the components can be very hot as a result of deployment. ! Example of the type of accident s01ah0211 The driver’s SRS frontal airbag and front passenger’s SRS frontal airbag are designed as follows. . To deploy in the event of an accident involving a moderate to severe frontal collision . To function on a one-time-only basis The driver’s SRS frontal airbag and front passenger’s SRS frontal airbag are not designed as follows. . To deploy in most lesser frontal impacts* 1 . To deploy in most side or rear impacts or in most rollover accidents*2 *1: Because the necessary protection can be achieved by the seatbelt alone. *2: Because deployment of only the driver’s SRS frontal airbag or both the driver’s and front passenger’s SRS frontal airbags would not protect the occupant in those situations. SRS airbag deployment depends on the level of force experienced in the passenger compartment during a collision. That level differs from one type of collision to another, and it may have no bearing on the visible damage done to the vehicle itself. ! Example of accident in which the driver’s/driver’s and front passenger’s SRS frontal airbag(s) will most likely deploy s01ah021101 A head-on collision against a thick concrete wall at a vehicle speed of 12 to 19 mph (20 to 30 km/h) or higher activates only the driver’s SRS frontal airbag or both driver’s and front passenger’s SRS frontal airbags. The airbag(s) will also be activated when the vehicle is exposed to a frontal impact similar in fashion and magnitude to the collision described above. – CONTINUED – SRS Airbag (Supplemental Restraint System Airbag) 91 1 Seat, Seatbelt and SRS Airbags ! Examples of the types of accidents in which it is possible that the driver’s/driver’s and front passenger’s SRS frontal airbag(s) will deploy s01ah021102 Only the driver’s SRS frontal airbag or both driver’s and front passenger’s SRS frontal airbags may be activated when the vehicle sustains a hard impact in the undercarriage area from the road surface (such as when the vehicle plunges into a deep ditch, is severely impacted or knocked hard against an obstacle on the road such as a curb). 92 SRS Airbag (Supplemental Restraint System Airbag) ! Examples of the types of accidents in which deployment of the driver’s/driver’s and front passenger’s SRS frontal airbag(s) is unlikely to occur S01AH021103 1 The vehicle strikes an object, such as a telephone pole or sign pole. 2 The vehicle slides under the load bed of a truck. 3 The vehicle sustains an oblique offset frontal impact. 4 The vehicle sustains an offset frontal collision. 5 The vehicle strikes an object that can move or deform, such as a parked vehicle. There are many types of collisions which might not necessarily require deployment of driver’s/driver’s and front passenger’s SRS frontal airbag(s). In the event of accidents like those illustrated, the driver’s/ driver’s and front passenger’s SRS frontal airbag(s) may not deploy depending on the level of accident forces involved. – CONTINUED – SRS Airbag (Supplemental Restraint System Airbag) 93 1 Seat, Seatbelt and SRS Airbags ! Examples of the types of accidents in which the driver’s/driver’s and front passenger’s SRS frontal airbag(s) are not designed to deploy in most cases s01ah021104 The driver’s and front passenger’s SRS frontal airbags are not designed to deploy in most of the following cases. . If the vehicle is struck from the side or from behind . If the vehicle rolls onto its side or roof . If the vehicle is involved in a low-speed frontal collision 1 First impact 2 Second impact In an accident where the vehicle is impacted more than once, the driver’s and/or front passenger’s SRS frontal airbag(s) will deploy only once. Example: In the case of a double collision, first with another vehicle, then against a concrete wall in immediate succession, once either or both of the driver’s and front passenger’s SRS frontal airbags is/are activated on the first impact, it/they will not be activated on the second impact. ! SRS seat cushion airbag operation s01ah0212 1 Passenger’s side WARNING The SRS seat cushion airbag is designed not to deploy when the seatbelt for the corresponding seat is not worn. For safety reasons, all persons in the vehicle should wear their seatbelts. The SRS seat cushion airbags are designed to deploy simultaneously when the SRS frontal airbags deploy. For details about the operating conditions, refer to 94 SRS Airbag (Supplemental Restraint System Airbag) “SUBARU Advanced Frontal Airbag System” P83. The front passenger’s SRS seat cushion airbag is designed not to deploy in either of the following conditions. . The front passenger’s seatbelt is not fastened (even when the front passenger’s frontal airbag ON indicator light illuminates while the OFF indicator light remains off). . The front passenger’s frontal airbag ON indicator light is off while the OFF indicator light illuminates. NOTE When the front passenger’s SRS frontal airbag is deactivated by the occupant detection system, the front passenger’s SRS seat cushion airbag is also deactivated. & SRS Side Airbag and SRS Curtain Airbag s01ah03 ! SRS side airbag s01ah0302 The SRS side airbag is stored in the door side of each front seat seatback, which bears an “SRS AIRBAG” mark. In a moderate to severe side impact collision, the SRS side airbag on the impacted side of the vehicle deploys between the occupant and the door panel and supplements the seatbelt by reducing the impact on the occupant’s chest and waist. The SRS side airbag operates only for front seat occupants. In an offset frontal collision, SRS side airbags on both sides of the vehicle deploy between the occupant and the door panel and supplements the seatbelt by reducing the impact on the occupant’s chest and waist. ! SRS curtain airbag s01ah0303 Your vehicle is equipped with a SUBARU SRS curtain airbag system that complies with the Federal Motor Vehicle Safety Standard (FMVSS) No. 226. The SRS curtain airbag on each side of the cabin is stored in the roof side (between the front pillar and a point over the rear seat). An “SRS AIRBAG” mark is located at the top of each center pillar. In a moderate to severe side impact collision, the SRS curtain airbag on the impacted side of the vehicle deploys between the occupant and the side window and supplements the seatbelt by reducing the impact on the occupant’s head. In a rollover, SRS curtain airbags on both sides of the vehicle deploy between the occupant and the side window and supplement the seatbelt by reducing the impact to the occupant’s head. In an offset frontal collision, SRS curtain airbags on both sides of the vehicle deploy between the occupant and the side window and supplement the seatbelt by reducing the impact to the occupant’s head and chest. – CONTINUED – SRS Airbag (Supplemental Restraint System Airbag) 95 1 Seat, Seatbelt and SRS Airbags ! Operation s01ah0301 The following SRS airbags is active only when the ignition switch is in the “ON” position. . Driver’s SRS side airbag . Front passenger’s SRS side airbag . SRS curtain airbag (right-hand side) . SRS curtain airbag (left-hand side) When the following sensors detect a certain amount of impact to the side of the vehicle or detect that the vehicle is leaning, airbag control units send signals to the airbag control modules to deploy the airbags. . The side impact sensors . The impact sensor in the airbag control module . The rollover sensor in the airbag control module Some of the airbags will deploy in a frontal collision. For details, refer to “SUBARU Advanced Frontal Airbag System” P83. SRS airbags are controlled by their airbag control units and deploy as necessary to effectively protect passengers depending on the accident type. Therefore, these airbags may deploy simultaneously. For the locations of the sensors and control modules, refer to “Components” P81. ! After deployment s01ah0304 After the deployment, the SRS side airbag immediately starts to deflate. The SRS curtain airbag remains inflated for a while following deployment then slowly deflates. The SRS side airbag and SRS curtain airbag deploy even when no one occupies the seat on the side on which an impact is applied. When the SRS side airbag and SRS curtain airbag deploy, a sudden, fairly loud inflation noise will be heard and some smoke will be released. These occurrences are a normal result of the deployment. This smoke does not indicate a fire in the vehicle. CAUTION Do not touch the SRS side airbag system components around the front seat seatback with bare hands right after deployment. Doing so can cause burns because the components can be very hot as a result of deployment. After deployment, do not touch any part of the SRS curtain airbag system (from the front pillar to the part of the roof side over the rear seat). Doing so can cause burns because the components can be very hot as a result of deployment. ! Example of the type of accident s01ah0305 The SRS side airbag and SRS curtain airbag are designed as follows: . To deploy in the event of an accident involving a moderate to severe side impact collision . To function on a one-time-only basis The SRS side airbag and SRS curtain airbag are not designed to deploy in the following cases: . In most lesser side impacts . In most frontal or most rear impacts (because the SRS side airbag and SRS curtain airbag deployment would not protect the occupant in those situations) The SRS curtain airbags are also designed to deploy when the vehicle is in an extremely inclined state such as during a rollover. They are not designed to deploy in most lesser inclined state. 96 SRS Airbag (Supplemental Restraint System Airbag) SRS side airbag and SRS curtain airbag deployment depend on the level of force experienced in the passenger compartment during a side impact collision. That level differs from one type of collision to another, and it may have no bearing on the visible damage done to the vehicle itself. ! Example of the type of accident in which the SRS side airbag will most likely deploy s01ah030501 1 A severe side impact near the front seat. 2 An offset frontal collision that is severe enough to deploy the front airbag. – CONTINUED – SRS Airbag (Supplemental Restraint System Airbag) 97 1 Seat, Seatbelt and SRS Airbags ! Examples of the types of accidents in which the SRS curtain airbag will most likely deploy S01AH030502 1 The vehicle is involved in a severe side impact near the front seat or the rear seat. 2 The vehicle rolls onto its side or the roof. 3 An offset frontal collision that is severe enough to deploy the front airbag. 98 SRS Airbag (Supplemental Restraint System Airbag) ! Examples of the types of accidents in which it is possible that the SRS side airbag and the SRS curtain airbag will deploy S01AH030503 1 Hitting a curb, edge of pavement or hard surface 2 Falling into or jumping over a deep hole 3 Landing hard or vehicle falling 4 The angle of vehicle tip-up is marginal or the skidding vehicle’s tires hit a curbstone laterally. It is possible that the SRS side and curtain airbags will deploy if a serious impact occurs to the underside of your vehicle. Some examples are shown in the illustration. – CONTINUED – SRS Airbag (Supplemental Restraint System Airbag) 99 1 Seat, Seatbelt and SRS Airbags ! Examples of the types of accidents in which the SRS side airbag is unlikely to deploy S01AH030504 1 The vehicle is involved in an oblique sideon impact. 2 The vehicle is involved in a side-on impact in an area outside the vicinity of the passenger compartment. 3 The vehicle strikes a telephone pole or similar object. 4 The vehicle is involved in a side-on impact from a motorcycle. 5 The vehicle rolls onto its side or the roof. There are many types of collisions which might not necessarily require SRS side airbag deployment. In the event of accidents like those illustrated, the SRS side airbag may not deploy depending on the level of accident forces involved. 100 SRS Airbag (Supplemental Restraint System Airbag) ! Examples of the types of accidents in which the SRS curtain airbag is unlikely to deploy S01AH030505 1 The vehicle is involved in an oblique sideon impact. 2 The vehicle is involved in a side-on impact in an area outside the vicinity of the passenger compartment. 3 The vehicle strikes a telephone pole or similar object. 4 The vehicle is involved in a side-on impact from a motorcycle. There are many types of collisions which might not necessarily require SRS curtain airbag deployment. In the event of accidents like those illustrated, the SRS curtain airbag may not deploy depending on the level of accident forces involved. – CONTINUED – SRS Airbag (Supplemental Restraint System Airbag) 101 1 Seat, Seatbelt and SRS Airbags ! Examples of the types of accidents in which the SRS side airbag and SRS curtain airbag are not designed to deploy in most cases s01ah030506 1 The vehicle is struck from behind. 2 The vehicle pitches end over end. In the event of accidents like those illustrated, the SRS side airbag and SRS curtain airbag are not designed to deploy in most cases. 1 First impact 2 Second impact A SRS curtain airbag B SRS side airbag In an accident where the vehicle is struck from the side more than once, the SRS side airbag and SRS curtain airbag deploy only once. Example: In the case of a double side impact collision, first with one vehicle and immediately followed by another from the same direction, once the SRS side airbag and SRS curtain airbag are activated on the first impact, they will not be activated on the second. & SRS Airbag System Monitors s01ah04 SRS airbag system warning light A diagnostic system continually monitors the readiness of the SRS airbag system (including seatbelt pretensioners) with the ignition switch in the “ON” position. The SRS airbag system warning light will show normal system operation by illuminating for approximately 6 seconds when the ignition switch is turned to the “ON” position. The diagnostic system monitors the components to ensure normal operation. For information on the components the system monitors, refer to “Components” P81. Note that the diagnostic system does not monitor the SRS airbag system warning light itself. 102 SRS Airbag (Supplemental Restraint System Airbag) WARNING If the warning light exhibits any of the following conditions, immediately stop the vehicle in a safe place, and consult a SUBARU dealer. Unless a technician checks and repairs the system as needed, the seatbelt pretensioners and/or the SRS airbag will not operate properly in the event of a collision, which may result in injury. . Flashing or flickering of the warning light . No illumination of the warning light when the ignition switch is first turned to the “ON” position . Continuous illumination of the warning light . Illumination of the warning light while driving & SRS Airbag System Servicing s01ah05 WARNING . When discarding an airbag module or scrapping the entire vehicle damaged by a collision, consult your SUBARU dealer. . The SRS airbag has no userserviceable parts. Do not use electrical test equipment on any circuit related to the SRS airbag system. For required servicing of the SRS airbag, consult your nearest SUBARU dealer. Tampering with or disconnecting the system’s wiring could result in accidental inflation of the SRS airbag or could make the system inoperative, which may result in serious injury. CAUTION If you need service or repair in areas indicated in the following list, have the work performed by an authorized SUBARU dealer. The SRS airbag control module, impact sensors and airbag modules are stored in these areas. . Under the center of the instrument panel . On both the right and left sides at the front of the vehicle . Steering wheel and column and nearby areas . Bottom of the steering column and nearby areas . Top of the dashboard on front passenger’s side and nearby areas . Each front seat and nearby area . Inside each center pillar . Inside each front door . In each roof side (from the front pillar to a point over the rear seat) . Between the rear seat cushion and rear wheel house on each side . Under the rear center seat In the event that the SRS airbag is deployed, replacement of the system should be performed only by an authorized SUBARU dealer. When the components of the SRS airbag system are replaced, use only genuine SUBARU parts. NOTE In the following cases, contact your SUBARU dealer as soon as possible. . The front part of the vehicle was involved in an accident in which only the driver’s SRS frontal airbag or both driver’s and front passenger’s SRS frontal airbags did not deploy. . The pad of the steering wheel, the cover over the front passenger’s – CONTINUED – SRS Airbag (Supplemental Restraint System Airbag) 103 1 Seat, Seatbelt and SRS Airbags SRS frontal airbag, or either roof side (from the front pillar to a point over the rear seat) is scratched, cracked, or otherwise damaged. . The center pillar, front door, rear wheel house or rear sub frame, or an area near these parts, was involved in an accident in which the SRS side airbag and SRS curtain airbag did not deploy. . The fabric or leather of either front seatback is cut, frayed, or otherwise damaged. . The rear part of the vehicle was involved in an accident in which no SRS airbag was deployed. & Precautions against Vehicle Modification s01ah06 WARNING . To avoid accidental activation of the system or rendering the system inoperative, which may result in serious injury, no modifications should be made to any components or wiring of the SRS airbag system. This includes following modifications. – Installation of custom steering wheels – Attachment of additional trim materials to the dashboard – Installation of custom seats – Replacement of seat fabric or leather – Installation of additional fabric or leather on the front seat – Attachment of a hands-free microphone or any other accessory to a front pillar, a center pillar, a rear pillar, the windshield, a side window, an assist grip, or any other cabin surface that would be near a deploying SRS curtain airbag. – Installation of additional electrical/ electronic equipment such as a mobile two-way radio on or near the SRS airbag system components and/ or wiring is not advisable. This could interfere with proper operation of the SRS airbag system. – Modifications on or inside the front door panels for the purpose of a speaker replacement or sound insulation . The impact sensors, which detect the pressure of an impact, are located in the doors. Do not modify any components of the doors or door trims, such as the addition of door speakers for example. Any modifications to the doors will create a risk of the airbag system becoming inoperative or unintended airbag deployment. . Installation of a tire of different size and construction from the tires specified on the vehicle placard attached to the driver’s door pillar or specified for individual vehicle models in this Owner’s Manual. CAUTION Do not perform any of the following modifications. Such modifications can interfere with proper operation of the SRS airbag system. . Attachment of any equipment (bush bar, winches, snow plow, skid plate, etc.) other than genuine SUBARU accessory parts to the front end. 104 SRS Airbag (Supplemental Restraint System Airbag) . Modification of the suspension system or front end structure. . Attachment of any equipment (side steps or side sill protectors, etc.) other than genuine SUBARU accessory parts to the side body. Always consult your SUBARU dealer if you want to install any accessory parts on your vehicle. & How to Contact the Vehicle Manufacturer concerning Modifications for Persons with Disabilities That May Affect the Advanced Airbag System s01ah15 Changing or moving any parts of the front seats, rear seat, seatbelts, front bumper, front side frame, radiator panel, instrument panel, combination meter, steering wheel, steering column, tire, suspension or floor panel can affect the operation of the SUBARU advanced airbag system. If you have any questions, you may contact the following SUBARU distributors. <Continental U.S., Alaska and the District of Columbia> Subaru of America, Inc. Customer Advocacy Department One Subaru Drive P.O. Box 9103 Camden, NJ 08101-9877 1-800-SUBARU3 (1-800-782-2783) <Hawaii> Subaru Hawaii 2850-A Pukoloa St., Honolulu, HI 96819 877-215-0338 <Guam> Shen’s Corporation dba Prestige Automobiles 491 East Marine Corps Drive, Dededo, Guam 96929 671-633-2698 <Puerto Rico> Trebol Motors 296 Marginal JF Kennedy, San Juan, Puerto Rico 787-793-2828 <Canada> Subaru Canada, Inc. Consumer Support Department 560 Suffolk Court, Mississauga, Ontario L5R 4J7 1-800-894-4212 There are currently no SUBARU distributors in any other U.S. territories. If you are in such an area, please contact the SUBARU distributor or dealer from which you bought your vehicle. SRS Airbag (Supplemental Restraint System Airbag) 105 1 Seat, Seatbelt and SRS Airbags———————— — — — — — — — — s02 2-1. Keys. 108 Key Number Plate. 108 2-2. Keyless Access with Push-Button Start System (If Equipped) 108 Safety Precautions 109 Locking and Unlocking with “Keyless Access” Entry Function 112 Unlock Using PIN Code Access 115 Power Saving Function. 117 Power Saving Function of Access Key Fob . 118 Disabling Keyless Access Function 118 Selecting Audible Signal Operation . 121 Selecting Hazard Warning Flasher Operation. 121 Warning Chimes and Warning Indicator 121 When Access Key Fob Does Not Operate Properly . 121 Replacing Battery of Access Key Fob . 121 Replacing Access Key Fob . 121 Certification for Keyless Access with Push- Button Start System . 121 2-3. Immobilizer 123 Security Indicator Light. 123 Key Replacement 123 Certification for Immobilizer System 123 2-4. Remote Keyless Entry System 124 Locking the Doors 126 Unlocking the Doors . 126 Opening the Rear Gate . 126 Setting Audible Signal Operation 126 Selecting Hazard Warning Flasher Operation 127 Vehicle Finder Function 127 Sounding a Panic Alarm. 127 Replacing the Battery. 127 Replacing Lost Transmitters. 127 Certification for Remote Keyless Entry System. 127 2-5. Door Locks 128 Locking and Unlocking from the Outside 128 Locking and Unlocking from the Inside 130 Automatic Door Locking/Unlocking 131 Key Lock-In Prevention Function 131 Battery Drainage Reduction Function . 132 2-6. Alarm System 133 Alarm System Operation 133 Arming the System 133 Disarming the System 134 Alarm System Setting. 135 If You Have Accidentally Triggered the Alarm System 135 Valet Mode . 135 2-7. Child Safety Locks 136 2-8. Windows.136 Power Window Operation . 137 Initialization of Power Window (Windows with One-Touch Auto Up and Down Function) 139 2-9. Rear Gate .139 2-10. Moonroof (If Equipped) .140 Moonroof Switches 141 Sunshade. 142 Keys and Doors 2 Keys and Doors 2-1. Keys s02aa NOTE For models with “keyless access with push-button start system”, refer to “Keyless Access with Push-Button Start System” P108. 1 Master keys 2 Key number plate The master key fit all locks on your vehicle. . Ignition switch . Driver’s door NOTE Locking/unlocking using the remote keyless entry system can also be controlled with the buttons on the key. For detailed information, refer to “Remote Keyless Entry System” P124. CAUTION Do not attach a large key holder or key case to either key. If it bangs against your knees while you are driving, it could turn the ignition switch from the “ON” position to the “ACC” or “LOCK” position, thereby stopping the engine. & Key Number Plate s02aa01 The key number is stamped on the key number plate attached to the key set. Write down the key number and keep it in another safe place, not in the vehicle. This number is needed to make a replacement key if you lose your key or lock it inside the vehicle. Refer to “Key Replacement” P123. 2-2. Keyless Access with Push-Button Start System (If Equipped) s02ap The following access key fobs are provided with the vehicle. 1 Access key fobs 2 Key number plate The keyless access with push-button start system allows you to perform the following functions when you are carrying the access key fob. . Locking and unlocking all the doors (including the rear gate and the fuel filler lid) . Starting and stopping the engine. For detailed information, refer to “Starting and Stopping Engine (Models with 108 Keys Push-Button Start System)” P315. . Arming and disarming the alarm system. For detailed information, refer to “Alarm System” P133. NOTE . Locking and unlocking by the remote keyless entry system can also be controlled with the buttons on the access key fob. For detailed information, refer to “Remote Keyless Entry System” P124. . Carefully store the key number plate supplied with the access key fob. It is necessary for vehicle repair and additional registration of access key fobs. For details, refer to “Key Replacement” P123. An emergency key is attached to each access key fob. 1 Release button 2 Emergency key While pressing the release button of the access key fob, take out the emergency key. The emergency key is used for the following operations. . Locking and unlocking the driver’s door & Safety Precautions s02ap11 WARNING If you wear an implanted pacemaker or an implanted defibrillator, stay at least 8.7 in (22 cm) away from the transmitting antennas installed on the vehicle. The radio waves from the transmitting antennas on the vehicle could adversely affect the operation of implanted pacemakers and implanted defibrillators. If you wear electronic medical equipment other than an implanted pacemaker or an implanted defibrillator, before using the keyless access with push-button start system, refer to “Radio waves used for the keyless access with push-button start system” mentioned later, and contact the electronic medical equipment manufacturer for more information. The radio waves from the transmitting antennas on the vehicle could adversely affect the operation of the electronic medical equipment. “Radio waves used for the keyless access with push-button start system” . The keyless access with pushbutton start system uses radio waves of the following frequency* in addition to the radio waves used for the remote keyless entry system. The radio waves are periodically output from the antennas installed on the vehicle as shown in the – CONTINUED – Keyless Access with Push-Button Start System 109 2 Keys and Doors following illustrations. *: Radio frequency: 134 kHz 1 Antennas CAUTION . Never leave or store the access key fob inside the vehicle or within 6.6 ft (2 m) around the vehicle (e.g., in the garage). The access key fob may be locked inside the vehicle, or the battery may discharge rapidly. Note that the push-button ignition switch may not turn on in some cases depending on the location of the access key fob. . The access key fob contains electronic components. Observe the following precautions to prevent malfunctions. – It is recommended to have the access key fob battery replaced at an authorized SUBARU dealer to avoid the risk of damage. – Do not get the access key fob wet. If the access key fob gets wet, wipe it off immediately and let it dry completely. – Do not apply strong impacts to the access key fob. – Never leave the access key fob in direct sunlight or anywhere that may become hot, such as on the dashboard. It may damage the battery or cause circuit malfunctions. – Do not wash the access key fob in an ultrasonic washer. – Do not leave the access key fob in humid or dusty locations. Doing so may cause malfunctions. – Keep the access key fob away from magnetic sources. – Do not leave the access key fob near a personal computer or home electrical appliance. – Do not leave the access key fob near a battery charger or any electrical accessories. – Do not apply metallic window tint or attach metallic objects to the windows. – Do not fit non genuine accessories or parts. . If the access key fob is dropped, the integrated emergency key inside may become loose. Be careful not to lose the emergency key. . When traveling in an airplane, do not press the button of the access key fob. If any button of the access key fob is pressed, radio 110 Keyless Access with Push-Button Start System waves are emitted and may affect the operation of the airplane. In a bag, take measures to prevent the buttons from being pressed accidentally. NOTE . The operational/non-operational setting for the keyless access function can be changed. For the setting procedure, refer to “Disabling Keyless Access Function” P118. . For detailed information about the operation method for the push-button ignition switch while the keyless access function is switched to the non-operational mode, refer to “Access Key Fob – If Access Key Fob Does Not Operate Properly” P441. . The keyless access with push-button start system uses weak radio waves. The status of the access key fob and environmental conditions may interfere with the communication between the access key fob and the vehicle under the following conditions, and it may not be possible to lock or unlock the doors or start the engine. – When operating near a facility where strong radio waves are transmitted, such as a broadcast station and power transmission lines. – When products that transmit radio waves are used, such as an access key fob or a remote transmitter key of another vehicle. – When carrying the access key fob of your vehicle together with the access key fob or the remote transmitter of another vehicle. – When the access key fob is placed near wireless communication equipment such as a cell phone. – When the access key fob is placed near a metallic object. – When metallic accessories are attached to the access key fob. – When carrying the access key fob with an electronic appliance such as a laptop computer. – When the battery of the access key fob is discharged. . The access key fob is always communicating with the vehicle and is continuously using the battery. Although the life of the battery varies depending on the operating conditions, it is approximately 1 to 2 years. If the battery becomes fully discharged, replace it with a new one. . If an access key fob is lost, it is recommended that all of the remaining access key fobs be reregistered. For reregistration of an access key fob, contact a SUBARU dealer. . For a spare access key fob, contact a SUBARU dealer. . Up to 7 access key fobs can be registered for one vehicle. . Do not leave the access key fob in the storage spaces inside the vehicle, such as the door pocket, dashboard or inside the cargo area. Vibrations may damage the key fob or turn on the switch, possibly resulting in a lockout. . After the vehicle battery is discharged or replaced, initialization of the steering lock system may be required to start the engine. In this case, perform the following procedure to initialize the steering lock. (1) Turn the push-button ignition switch to the “OFF” position. For details, refer to “Switching Power Status” P151. (2) Open and close the driver’s door. (3) Wait for approximately 10 seconds. – CONTINUED – Keyless Access with Push-Button Start System 111 2 Keys and Doors When the steering is locked, the initialization is completed. . Do not leave the access key fob in the following places. – On the instrument panel – On the floor – Inside the glove box – Inside the door trim pocket – On the rear seat – In the cargo area If you do, the following situations may occur. – The access key fob is mistakenly locked inside the vehicle. – A false warning issues although no malfunction actually occurs. – No warning issues even when a malfunction occurs. & Locking and Unlocking with “Keyless Access” Entry Function s02ap01 When the access key fob is carried within the operating range, all the doors (including the rear gate and the fuel filler lid) can be locked/unlocked just by touching the door handle. NOTE The vehicle can also be locked/unlocked with the remote keyless entry system. For details, refer to “Remote Keyless Entry System” P124. ! Operating ranges s02ap0101 1 Antennas 2 Operating range 1 LED indicator When the access key fob is within either of the operating ranges, the LED indicator on the access key fob flashes. When the keyless access functions are disabled, the LED indicator does not flash unless a button on the access key fob is pressed. NOTE . If the access key fob is placed too close to the vehicle body, the keyless access functions may not operate properly. If it does not operate properly, repeat the operation from farther away. . If the access key fob is placed near the ground or in an elevated location from the ground, even if it is in the indicated operating range, the key- 112 Keyless Access with Push-Button Start System less access function may not operate properly. . When the access key fob is within the operating range, it is possible for anyone, even someone who is not carrying the access key fob, to operate the keyless access function. Note that the keyless access function can be operated only by the door handle, door lock sensor or rear gate opener button in the operating range in which the access key fob is detected. . It is not possible to lock the doors, the rear gate and the fuel filler lid using the keyless access function when the access key fob is inside the vehicle. However, depending on the status of the access key fob and the environmental conditions, the access key fob may be locked inside the vehicle. Before locking the vehicle, make sure that you have the access key fob. . When the battery of the access key fob is discharged, or when operating it in a location with strong radio waves or noise (e.g., near a radio tower, power plant, broadcast station or an area where wireless equipment is used), or while talking on a cell phone, the operating ranges may be reduced, or the keyless access function may not operate. In such a case, perform the procedure described in “Locking and Unlocking” P441. . The doors may lock or unlock when the car is being washed or exposed to a significant amount of water that touches the door handle while the key fob is still in the operating range. ! How to lock and unlock s02ap0108 It is possible to perform the following operations when you are carrying the access key fob. . Lock and unlock the doors and the fuel filler lid. . Lock and unlock the rear gate. NOTE . It is not possible to lock the doors, the rear gate and the fuel filler lid using the keyless access function when the push-button ignition switch is in the “ACC” or “ON” position. Refer to “Switching Power Status” P151. . If the door handle is gripped with a gloved hand, the door lock may not be released. . If the door lock sensor is touched four times or more repeatedly, the system will ignore the sensor operation. . When performing the locking procedure too quickly, locking may not complete. After performing the locking procedure, it is recommended to pull the rear door handle to confirm that the doors have been locked. . If any of the doors (including the rear gate) is not fully closed, the following will occur to alert you. – An electronic chirp sounds five times. – The hazard warning flashers flash five times. . If any of the doors or the rear gate is open, the doors, the rear gate and the fuel filler lid cannot be locked. . Within 3 seconds after locking the doors and the rear gate using the keyless access function, it is not possible to unlock the doors and/or the rear gate using the keyless access function. . When locking, be sure to carry the access key fob to prevent locking the access key fob in the vehicle. . The setting of the hazard warning flasher operation can be changed by operating the center information display. For details, refer to “Car settings” P203 (11.6-inch display models) or “Vehicle setting icons” – CONTINUED – Keyless Access with Push-Button Start System 113 2 Keys and Doors P221 (dual 7.0-inch display models). Also, the setting of the hazard warning flasher operation can be changed by your SUBARU dealer. Contact your SUBARU dealer for details. !Locking with the door lock sensor s02ap010801 1 Door lock sensor Carry the access key fob, close all the doors (including the rear gate) and touch the door lock sensor on the door handle. All the doors (including the rear gate and the fuel filler lid) will be locked. Also, an electronic chirp will sound once and the hazard warning flashers will flash once. NOTE After touching the door lock sensor to lock all of the doors (including the rear gate), if you touch the door lock sensor once more to attempt the lock operation without first unlocking the doors, nothing will happen, even if the door lock sensor is touched. In this case, perform the unlocking operation once first. You can then touch the door lock sensor to lock the doors. ! Locking with the rear lock button s02ap010802 1 Rear lock button Carry the access key fob, close all doors including the rear gate and press the rear lock button. The rear gate, the fuel filler lid and all doors will be locked. Also, the hazard warning flashers will flash once. ! Unlocking s02ap010804 Carry the access key fob, and touch the sensor behind the door handle. . When the driver’s door handle is gripped, only the driver’s door and the fuel filler lid will be unlocked. . When the front passenger’s door handle is gripped, all the doors (including the rear gate) and the fuel filler lid will be unlocked. Also, an electronic chirp will sound twice and the hazard warning flashers will flash twice. 114 Keyless Access with Push-Button Start System ! Opening rear gate s02ap010805 1 Rear gate opener button Carry the access key fob, and press the rear gate opener button. Only the rear gate will be unlocked and opened. Also, an electronic chirp will sound twice and the hazard warning flashers will flash twice. ! Door unlock selection function s02ap0105 When the door is unlocked using the keyless access function, only the doors that were set and the fuel filler lid can be unlocked. The settings can be changed with the following methods. . The setting can be changed by operating the center information display. For details, refer to “Car settings” P203 (11.6-inch display models) or “Vehicle setting icons” P221 (dual 7.0-inch display models). . The setting can be changed by a SUBARU dealer. & Unlock Using PIN Code Access s02ap21 1 Rear lock button While all the doors (including the rear gate and the fuel filler lid) are locked, you can unlock them without a key by pressing the rear lock button. NOTE PIN Code Access will be helpful if the key is accidentally left in the vehicle. It is recommended that a 5-digit security code (PIN code) is registered. – CONTINUED – Keyless Access with Push-Button Start System 115 2 Keys and Doors ! Registration for a PIN code s02ap2102 Steps Operation Time from the previous step 1 Turn off the ignition switch. — 2 Close all the doors (including the rear gate). — 3 Press and hold the “ ” button on the access key fob, then press and hold the rear lock button until a chirp sounds intermittently. — 4 Press the “ ” button on the access key fob. Within 30 seconds Input the PIN code using the rear lock button within 30 seconds after the chirp sound of step 4. For example, to register “32468” as the PIN code, perform the following procedure. 5 Within 30 seconds (1) Press the button three times. (2) After a chirp sounds once, press the button twice. (3) After a chirp sounds once, press the button four times. (4) After a chirp sounds once, press the button six times. (5) After a chirp sounds once, press the button eight times. 6 Perform step 5 again within approximately 30 seconds after the chirp starts sounding intermittently. — 7 All doors will be unlocked and locked. Then the PIN code will be registered. — NOTE Press the “ ” button within 30 seconds of step 6 to end the preparation mode and move on to the registration stage. Unless the “ ” button is pressed within 30 seconds after step 6, the PIN code registration will be canceled. 116 Keyless Access with Push-Button Start System NOTE . Press the rear lock button ten times to enter “0”. . Change the PIN code frequently to protect your vehicle from theft. . If you have lent your vehicle to another person, confirm that the PIN code has not been changed or deleted. If the PIN code has been changed or deleted, reregister a new PIN code. . If you make an error during the registration procedure, press the “ ” or “ ” button on the access key fob. Then start over from step 1. . To protect your vehicle from theft, you cannot register “00000” to “99999” or “12345” as a PIN code. . Do not register your vehicle license plate number or simple numbers such as “11122” or “12121” as a PIN code. Doing so will increase the risk of vehicle theft. . When you try to register “22222”, the registered PIN code will be deleted. You cannot unlock the doors by PIN Code Access until a new code is registered. . After registering a new PIN code, make sure that you can unlock the doors using the PIN code. . The PIN code cannot be deleted while the keyless access function is disabled by operating the access key fob. . Reregister the PIN code in the following case. – When you forget the PIN code – When you want to change the PIN code ! Unlocking s02ap2103 Perform steps (1) to (5) of step 5 described in “Registration for a PIN code”. NOTE . You cannot unlock by PIN Code Access in the following cases. – When the access key fob is within the operating ranges – When the ignition switch is in the “ACC” or “ON” position . If you make an operation error during the unlocking procedure, start over with the unlocking procedure after waiting for 5 seconds or longer. . To protect your vehicle from theft, a buzzer will sound if incorrect PIN codes are entered five times continuously. If this occurs, you cannot unlock the doors by PIN Code Access for 5 minutes. & Power Saving Function s02ap23 To protect the access key fob battery and the vehicle battery, the keyless access function will be disabled as follows. . When the keyless access function and the remote keyless entry system have not been used: (1) 5 days after the push-button ignition switch has been turned off, communication between the antennas and the access key fob will be stopped. (2) 9 days after step (1), the sensors (both lock sensor and unlock sensor) on the front passenger’s door will be disabled. . When the access key fob has been left in the operating range for 10 minutes or longer while all doors are locked, the keyless access function will be disabled. ! Recovery from power saving mode s02ap2301 When one of the following operations is performed, the keyless access function will be recovered. . Unlock by gripping the door handle (only when the sensors on the front passenger’s door are not disabled) or pressing rear gate opener button on the rear gate. – CONTINUED – Keyless Access with Push-Button Start System 117 2 Keys and Doors . Lock or unlock by the remote keyless entry system. . Open a door and then close it. . Turn the push-button ignition switch to the “ON” position. & Power Saving Function of Access Key Fob s02ap26 This function stops the access key fob from receiving signals and helps minimize the battery consumption of the access key fob. 1. Press the “ ” button twice while holding the “ ” button. 1 LED indicator 2. Confirm that the LED indicator blinks 4 times to notify that the setting is complete. When the access key fob is in the power save mode, the keyless access function and push-button start system will not be available. To cancel the power save mode, press one of the buttons on the access key fob. & Disabling Keyless Access Function s02ap07 WARNING If you have an implanted pacemaker or an implanted defibrillator, perform the procedure “By operating the driver’s door” P120 to disable the keyless access function. If you perform the procedure “By operating the access key fob” P118, the operation of an implanted pacemaker or implanted defibrillator may be affected by the radio waves from the transmitting antennas installed on the vehicle. When the vehicle is not going to be used for a long time, or when you choose not to use the keyless access function, the keyless access function can be disabled. NOTE . If the access key is kept in or comes near the vehicle, the system becomes active and both the vehicle and access key batteries’ energy will be consumed. If this occurs frequently or continuously, both the vehicle and access key batteries can become fully drained. . The locking and unlocking function by the remote keyless entry system is not disabled. . To start the engine while the functions are disabled, perform the procedure described in “Starting Engine” P442. ! Disabling functions s02ap0701 ! By operating the access key fob s02ap070102 To disable the keyless access function by operating the access key fob, register a PIN code for PIN Code Access. For details about registering a PIN code, refer to “Unlock Using PIN Code Access” P115. 118 Keyless Access with Push-Button Start System 1. Open the driver’s door. 2. Rotate the lock lever forward. 3. Press and hold the “ ” button and “ ” button on the access key fob simultaneously for more than 5 seconds. A chirp sound will be heard, and the function will be disabled. – CONTINUED – Keyless Access with Push-Button Start System 119 2 Keys and Doors ! By operating the driver’s door s02ap070101 To disable the keyless access function by operating the driver’s door, perform the following procedures. Steps Operation Time Status 1 Sit in the driver’s seat, and close the door. — Close 2 Push “ ” on the power door locking switch. — Close 3 Open the driver’s door. Within 5 sec. Close?Open 4 Push “ ” on the power door locking switch twice. Within 5 sec. Open 5 Close and open the driver’s door twice. Within 10 sec. Open?Close? Open?Close?Open 6 Push “ ” on the power door locking switch twice while the door is open. Within 10 sec. Open 7 Close and open the driver’s door once. Within 10 sec. Open?Close?Open 8 Close the door. Within 5 sec. Open?Close A chirp will sound and the functions will be disabled. NOTE In steps 4 and 6, press the power door locking switch firmly. If the switch is not pressed firmly, the functions may not be disabled. 120 Keyless Access with Push-Button Start System ! Enabling functions s02ap0702 When the procedure to disable the functions is performed again, a chirp sound will be heard, and the functions are enabled. NOTE . The keyless access function will be enabled only if you perform the procedure in the same manner you disabled the function (for example, when disabling by operating the driver’s door, the function will not be enabled even if you operate the access key fob). . Press the push-button ignition switch if you do not know the procedure in which the keyless access function was disabled. – When disabling by operating the driver’s door: A chirp will not be heard. – When disabling by operating the access key fob: A chirp will be heard. & Selecting Audible Signal Operation s02ap12 Using an electronic chirp, the system will give you an audible signal when the doors are locked or unlocked. If desired, you can turn the audible signal off by operating the center information display. For details, refer to “Car settings” P203 (11.6-inch display models) or “Vehicle setting icons” P221 (dual 7.0-inch display models). Furthermore, the volume setting of the audible signal can also be changed by a SUBARU dealer. Consult your SUBARU dealer for details. & Selecting Hazard Warning Flasher Operation s02ap18 Using the hazard warning flasher, the system will give you a visible signal when the doors are locked or unlocked. If desired, you can turn the hazard warning flashers off by operating the center information display. For details, refer to “Car settings” P203. The setting can also be changed by a SUBARU dealer. Consult your SUBARU dealer for details. & Warning Chimes and Warning Indicator s02ap06 The keyless access with push-button start system is equipped with a warning chime and the access key warning indicator in order to minimize improper operations and help protect your vehicle from theft. For details, refer to “Warning Chimes and Warning Indicator of the Keyless Access with Push-Button Start System” P170. & When Access Key Fob Does Not Operate Properly s02ap08 Refer to “Access Key Fob – If Access Key Fob Does Not Operate Properly” P441. & Replacing Battery of Access Key Fob s02ap09 Refer to “Replacing Battery of Access Key Fob” P497. & Replacing Access Key Fob s02ap13 Access key fobs can be replaced at SUBARU dealers. For more details, contact a SUBARU dealer. & Certification for Keyless Access with Push-Button Start System s02ap14 . U.S.-spec. models FCC ID: HYQ14AKB FCC ID: Y8PSU19S-3 FCC ID: Y8PSSPIMB02 CAUTION FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void – CONTINUED – Keyless Access with Push-Button Start System 121 2 Keys and Doors the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. . Canada-spec. models – Type 1 – Type 2 122 Keyless Access with Push-Button Start System 2-3. Immobilizer s02ab The immobilizer system is designed to prevent an unauthorized person from starting the engine. Only keys registered with your vehicle’s immobilizer system can be used to operate your vehicle. If engine start is attempted with an unregistered access key fob or key, the engine will not start. Even if the engine does start, it will stop after a few seconds. This system, however, is not a 100% anti-theft guarantee. CAUTION . Do not place the key under direct sunlight or anywhere it may become hot. . Do not get the key wet. If the key gets wet, wipe it dry with a cloth immediately. . Do not modify or remove the system. If modified or removed, the proper operation of the system cannot be guaranteed. NOTE . To protect your vehicle from theft, please pay close attention to the following security precautions: – Never leave your vehicle unattended with its keys inside. – Before leaving your vehicle, close all windows and the moonroof, and lock all the doors (including the rear gate and the fuel filler lid). – Do not leave spare keys or any record of your key number in the vehicle. . The vehicle has a maintenance-free type immobilizer system. & Security Indicator Light s02ab02 Refer to “Security Indicator Light” P175. & Key Replacement s02ab03 Your key number plate will be required if you ever need a replacement key made. Any new key must be registered for use with your vehicle’s immobilizer system before it can be used. The maximum number of keys that can be registered for use with one vehicle is as follows. . Four (models without “keyless access with push-button start system”) . Seven (models with “keyless access with push-button start system”) One key that has already been registered is required in order to register a new key. NOTE If you lose a key, the lost key’s ID code still remains in the memory of the vehicle’s immobilizer system. For security reasons, the lost key’s ID code should be erased from the memory. To erase the lost key’s ID code, all keys that will be used are required. For details about new key registration and erasing the lost key’s ID code, contact your SUBARU dealer. & Certification for Immobilizer System s02ab05 . For models with “keyless access with push-button start system”: Refer to “Certification for Keyless Access with Push-Button Start System” P121. . For models without “keyless access with push-button start system”: – U.S.-spec. models FCC ID: Y8PFJ18-3 – CONTINUED – Immobilizer 123 2 Keys and Doors CAUTION FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. – Canada-spec. models 2-4. Remote Keyless Entry System s02ae CAUTION . Do not expose the remote transmitter to severe shocks, such as those experienced as a result of dropping or throwing. . Do not take the remote transmitter apart except when replacing the battery. . Do not get the remote transmitter wet. If it gets wet, wipe it dry with a cloth immediately. . When you carry the remote transmitter on an airplane, do not press the button of the remote transmitter while in the airplane. When any button of the remote transmitter is pressed, radio waves are sent and may affect the operation of the airplane. When you carry the remote transmitter in a bag on an airplane, take measures to prevent the buttons of the remote transmitter from being pressed. 124 Remote Keyless Entry System Access key fob 1 Lock/arm button 2 Unlock/disarm button 3 Rear gate unlock button 4 PANIC button Transmitter 1 Lock/arm button 2 Unlock/disarm button 3 Rear gate unlock button 4 PANIC button The remote keyless entry system has the following functions. . Locking and unlocking all the doors (including the rear gate and the fuel filler lid) . Unlock the rear gate . Sounding a panic alarm . Arming and disarming. For details, refer to “Alarm System” P133. The operable distance of the remote keyless entry system is approximately 30 feet (10 meters). However, this distance will vary depending on environmental conditions. The system’s operable distance will be shorter in areas near a facility or electronic equipment emitting strong radio waves such as a power plant, broadcast station, TV tower, or remote controller of home electronic appliances. NOTE . For models with “keyless access with push-button start system”, the remote keyless entry system will not be activated when the push-button ignition switch is in any position other than the “OFF” position. . For models without “keyless access with push-button start system”, the remote keyless entry system will not be activated when the key is inserted in the ignition switch. . The hazard warning flashers will flash once or twice when the access key fob/transmitter button is pressed in the following cases. – When locking the doors – When unlocking the doors – When unlocking the rear gate – CONTINUED – Remote Keyless Entry System 125 2 Keys and Doors If desired, you can turn the hazard warning flashers off by operating the center information display. For details, refer to “Car settings” P203 (11.6- inch display models) or “Vehicle setting icons” P221 (dual 7.0-inch display models). The setting can also be changed by a SUBARU dealer. Consult your SUBARU dealer for details. & Locking the Doors s02ae01 Press the “ ” button to lock all the doors (including the rear gate and the fuel filler lid). An electronic chirp will sound once and the hazard warning flashers will flash once. If any of the doors (including the fuel filler lid) is not fully closed, the following will occur to alert you that the doors are not properly closed. . An electronic chirp sounds five times. . The hazard warning flashers flash five times. When you close the door, it will automatically lock and then the following will occur. . An electronic chirp sounds once. . The hazard warning flashers flash once. & Unlocking the Doors s02ae02 Press the “ ” button to unlock the driver’s door and fuel filler lid. An electronic chirp will sound twice and the hazard warning flashers will flash twice. To unlock all the doors and the rear gate, briefly press the “ ” button again within 5 seconds. NOTE If the interval between the first and second presses of the “ ” button for unlocking all the doors is extremely short, the system may not respond. & Opening the Rear Gate s02ae13 Press the “ ” button to unlock the rear gate. An electronic chirp will sound twice and the hazard warning flashers will flash twice. This operation setting can be changed by a SUBARU dealer. Consult your SUBARU dealer for details. & Setting Audible Signal Operation s02ae07 Using an electronic chirp, the system will give you an audible signal when the doors lock and unlock. Models with “keyless access with push-button start system”: If desired, you can turn the audible signal off by operating the center information display. For details, refer to “Car settings” P203 (11.6-inch display models) or “Vehicle setting icons” P221 (dual 7.0- inch display models). Furthermore, the volume setting of the audible signal can also be changed by a SUBARU dealer. Consult your SUBARU dealer for details. Models without “keyless access with push-button start system”: Perform the following steps to deactivate the audible signal. Take the same steps to restore the function. 126 Remote Keyless Entry System Steps Operation Time 1 Sit in the driver’s seat. — 2 Close all doors. — 3 (1) Press and hold “ ” on the power locking switch. Within 10 sec. (2) Insert the key into the ignition switch and pull it out at least 6 times. 4 Open and close the driver’s door. Within 10 sec. The hazard warning flashers flash 3 times to indicate completion of the setting. Your SUBARU dealer can perform the above procedure for you. & Selecting Hazard Warning Flasher Operation s02ae26 Using the hazard warning flasher, the system will give you a visible signal when the doors are locked or unlocked. If desired, you can turn the hazard warning flashers off by operating the center information display. For details, refer to “Car settings” P203 (11.6-inch display models) or “Vehicle setting icons” P221 (dual 7.0-inch display models). The setting can also be changed by a SUBARU dealer. Consult your SUBARU dealer for details. & Vehicle Finder Function s02ae05 Use this function to find your vehicle parked among many vehicles in a large parking lot. Provided you are within 30 feet (10 meters) of the vehicle, pressing the “ ” button three times in a 5-second period will cause your vehicle’s horn to sound once and its hazard warning flashers to flash three times. NOTE If the interval between presses is too short when you press the “ ” button three times, the system may not respond to the signals from the remote transmitter. & Sounding a Panic Alarm s02ae06 To activate the alarm, press the “PANIC” button once. The horn will sound and the hazard warning flashers will flash. To deactivate the panic alarm, press any button on the remote transmitter. If a button on the remote transmitter is not pressed, the alarm will be deactivated after approximately 30 seconds. & Replacing the Battery s02ae08 Refer to “Replacing Battery” P496. & Replacing Lost Transmitters s02ae09 If you lose a transmitter or want to purchase additional transmitters (up to four can be programmed), you should reprogram all your transmitters for security reasons. For details, contact your SUBARU dealer and have the transmitters programmed into the remote keyless entry system. & Certification for Remote Keyless Entry System s02ae18 . U.S.-spec. models FCC ID: CWTB1G496 FCC ID: CWTD1G141 CAUTION FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device – CONTINUED – Remote Keyless Entry System 127 2 Keys and Doors may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. . Canada-spec. models – Type 1 – Type 2 2-5. Door Locks s02ac & Locking and Unlocking from the Outside s02ac01 NOTE If you unlock the driver’s door with a key (including an emergency key) and open the door while the alarm system is armed, the alarm system is triggered and the vehicle’s horn sounds. In this case, perform any of the following operations: Models with “keyless access with push-button start system”: . Press any button on the access key fob (except when the access key fob battery is discharged). . Turn the push-button ignition switch to the “ACC” position. . Carry the access key fob and perform either of the following procedures. – Grip the front door handle. – Press the rear gate opener button. Models without “keyless access with push-button start system”: . Press any button on the remote transmitter (except when the transmitter battery is discharged). 128 Door Locks . Insert the key into the ignition switch and turn the ignition switch to the “ON” position. For details about the alarm system, refer to “Alarm System” P133. ! How to lock and unlock the vehicle using the key s02ac0101 1 Rotate the key toward the front to lock. 2 Rotate the key toward the rear to unlock. In this case, only the driver’s side door is locked or unlocked. NOTE Models with “keyless access with push-button start system”: The emergency key is directional. If the key cannot be inserted, change the direction that the grooved side is facing and insert it again. ! How to lock the vehicle without using the key s02ac0102 To lock the door from outside without the key, the following methods are available. ! Locking using lock lever s02ac010201 1 Rotate the lock lever forward. 2 Close the door. In this way, only the door that was operated will be locked. ! Locking using power door locking switch s02ac010202 1 Press the side of the power door locking switch.* 2 Close the door. *: For details about the power door locking switch, refer to “How to operate the power door locking switches” P130. In this case, all the closed doors, the fuel filler lid and the rear gate are locked at the same time. NOTE Make sure that you do not leave the key inside the vehicle before locking the doors from the outside without the key. – CONTINUED – Door Locks 129 2 Keys and Doors & Locking and Unlocking from the Inside s02ac02 ! How to use the lock lever s02ac0202 1 Rotate the lock lever rearward to unlock. 2 Rotate the lock lever forward to lock. To lock the door from the inside, rotate the lock lever forward. To unlock the door from the inside, rotate the lock lever rearward. The red mark on the lock lever appears when the door is unlocked. Pull the inside door handle to open an unlocked door. Always make sure that all the doors and the rear gate are closed before starting to drive. WARNING . Keep all doors locked when you drive, especially when small children are in your vehicle. Along with the proper use of seatbelts and child restraint systems, locking the doors reduces the chance of being thrown out of the vehicle in an accident. It also helps prevent passengers from falling out by preventing a door from being accidentally opened, and intruders from unexpectedly opening doors and entering your vehicle. . Do not pull the front door handle from inside while driving. The door could open even if it is locked. CAUTION Do not pull the front inside door handle while operating the door lock. There is a risk that it will not be possible to open or lock the front doors. ! How to operate the power door locking switches s02ac0203 All the doors (including the rear gate and the fuel filler lid) can be locked and unlocked by pressing either side of the power door locking switches located on the driver’s side and the front passenger’s side doors. 1 Lock 2 Unlock NOTE Make sure that you do not leave the key inside the vehicle before locking the doors from the outside using the power door locking switches. 130 Door Locks & Automatic Door Locking/Unlocking s02ac08 All the doors (including the fuel filler lid) are automatically locked or unlocked under the following conditions. . For automatic door locking – When the vehicle speed reaches 12 mph (20 km/h) or higher (factory default setting). – When the select lever is shifted into a position other than the “P” position. . For automatic door unlocking – When the driver’s door is open (factory default setting). – When the ignition switch is turned to OFF. – When the select lever is shifted into the “P” position. NOTE . The automatic door lock and unlock setting can be changed with the center information display. Refer to “Car settings” P203 (11.6-inch display models) or “Vehicle setting icons” P221 (dual 7.0-inch display models). . When locking the door by the power door locking switches, automatic door locking will not operate. . When unlocking the door by the power door locking switches, automatic door unlocking will not operate. . If the system detects a strong enough impact to deploy the airbags, all doors may be automatically unlocked. For further details, refer to “Automatic Door Locking/Unlocking Operation When Involved in an Accident” P445. . When getting out of the vehicle from a rear door, make sure to unlock all the doors by pushing the unlock side of the power door locking switch. If a rear door is unlocked from the inside door lever then the door is opened and closed, the Key lock-in prevention function will be triggered. All doors will be unlocked, the Key lock-in prevention warning indicator “ ” will appear and the warning chime will also sound. & Key Lock-In Prevention Function s02ac06 Under the following conditions, all the doors will not lock when the power door locking switch is pushed with the driver’s door open. . The key is still in the ignition switch (models without “keyless access with push-button start system”). . The ignition switch is in the “ACC” or “ON” position (models with “keyless access with push-button start system”). NOTE . When leaving the vehicle, make sure you are holding the key before locking the doors. . When getting out of the vehicle from a rear door, make sure to unlock all the doors by pushing the unlock side of the power door locking switch. . When getting out of the vehicle from a rear door, make sure to unlock all the doors by pushing the unlock side of the power door locking switch. If a rear door is unlocked from the inside door lever then the door is opened and closed, the Key lock-in prevention function will be triggered. All doors will be unlocked, the Key lock-in prevention warning indicator “ ” will appear and the warning chime will also sound. . The factory setting (default setting) for this function is set as “operational”. This function’s operational/ non-operational setting can be changed by a SUBARU dealer. Contact a SUBARU dealer for details. – CONTINUED – Door Locks 131 2 Keys and Doors ! Non-operation of key lock-in prevention function s02ac0602 When the system is set so that it does not operate, the doors are locked by the following operation. . If the lock lever is turned to the front (“LOCK”) position with the driver’s door open and the driver’s door is then closed with the lock lever in that position, the driver’s door is locked. . If the emergency key is used to lock the driver’s door from the outside of the vehicle, the door is locked. & Battery Drainage Reduction Function s02ac03 Under various conditions, lights inside the vehicle will automatically turn off to reduce the risk of discharging the battery. ! Battery drainage reduction function for various conditions s02ac0302 This function will enter standby mode under the following conditions: . The ignition switch is turned to the “OFF” position (models with “keyless access with push-button start system”). . The key is removed from the ignition key cylinder (models without “keyless access with push-button start system”). If the following actions are not performed within 20 minutes, while the function is in standby mode, any room lights that are on will automatically turn off. Turning off lights – Map light – Dome light – Ignition switch light*1 – Cargo area light – Vanity mirror light Actions – Turn the ignition switch to the “ACC” or “ON” position. – Open or close the doors, including the rear gate. – Push the unlock button on the access key fob or transmitter. – Hold the front door handle and unlock it while holding the access key fob.*1 – Insert the key into the keyhole of the ignition switch.*2 – Come close to the vehicle that the front door was locked while holding the access key fob (if OFF delay timer setting for period of time is not off).*1 – Push the panic button on the access key fob or transmitter. *1: Models with “keyless access with pushbutton start system” *2: Models without “keyless access with pushbutton start system” Perform the action in the above table to illuminate the lights again when the battery drainage reduction function is active. NOTE . The battery drainage reduction function cannot be turned off. . If the battery drainage reduction function is in operation when a door is open, the target room light will not be illuminated. . To protect the battery from battery drainage, make sure that all doors, including the rear gate, are completely closed when leaving the vehicle. 132 Door Locks 2-6. Alarm System s02af The alarm system helps to protect your vehicle and valuables from theft. The horn sounds and the hazard warning flashers flash if someone attempts to break into your vehicle. For models with “keyless access with push-button start system”: The system can be armed or disarmed with the keyless access function or access key fob. The system will not be activated when the push-button ignition switch is in the “ACC” or “ON” position. For models without “keyless access with push-button start system”: The system can be armed or disarmed with the remote transmitter. The system will not be activated when the key is inserted into the ignition switch. Your vehicle’s alarm system has been set for activation at the time of shipment from the factory. You can set the system for deactivation yourself or have it done by your SUBARU dealer. & Alarm System Operation s02af01 When the alarm system is armed, it is triggered by the opening any of the doors, the rear gate or engine hood. The alarm system will activate the following alarms when triggered. . The vehicle’s horn will sound for 30 seconds. . The hazard warning flashers will flash for 30 seconds. If any of the doors, the rear gate or engine hood remains open after the 30-second period, the horn will continue to sound for a maximum of 3 minutes. If the door, rear gate or engine hood is closed while the horn is sounding, the horn will stop sounding with a delay of up to 30 seconds. NOTE The alarm system can be set to trigger the illumination of the following interior lights. . Map lights (illuminates only when the door interlock switch is in the “DOOR” position) . Dome light (illuminates only when the dome light switch is in the “DOOR” position) The notifications regarding the map lights and dome light are deactivated as the factory setting. A SUBARU dealer can activate the system. Contact your SUBARU dealer for details. & Arming the System s02af04 The alarm system becomes armed when the following operation is performed. 1. Close all windows and the moonroof (if equipped) and turn the ignition switch to the “OFF” position. 2. Carry the key and get out of the vehicle. 3. Make sure that the engine hood is locked. 4. Lock the doors using any of the following methods. . Locking using the remote keyless entry system. For details, refer to “Remote Keyless Entry System” P124. . Locking using the keyless access function (if equipped). For details, refer to “Locking with the door lock sensor” P114. . Locking using the power door locking switch. For details, refer to “Locking using power door locking switch” P129. – CONTINUED – Alarm System 133 2 Keys and Doors Security indicator light NOTE . All doors, the rear gate and fuel filler lid will lock, an electronic chirp will sound once, the hazard warning flashers will flash once, and the security indicator light will start flashing rapidly. . If any of the doors or the rear gate is not fully closed, an electronic chirp sounds five times and the hazard warning flashers flash five times to alert you that the doors (or the rear gate) are not properly closed. When you close the door, doors will automatically lock and the system will automatically arm in 30 seconds. 5. Approximately 30 seconds later, the system will enter surveillance state. When the system is in surveillance state, the security indicator light will then flash slowly (twice approximately every 2 seconds), indicating that the system has been armed for surveillance. NOTE . The system can be armed even if the windows and/or moonroof are open. Always make sure that they are fully closed before arming the system. . The 30-second standby time can be eliminated if you prefer. Have it performed by your SUBARU dealer. . If any of the following actions is done during the standby period, the system will not switch to the surveillance state. – Doors (including the rear gate) are unlocked using the access key fob/remote transmitter. – Doors (including the rear gate) are unlocked using the keyless access function (models with “keyless access with push-button start system”). – Any door (including the engine hood) is opened. – The ignition switch is turned to the “ON” position (models without “keyless access with pushbutton start system”). – Push-button ignition switch is turned to the “ACC” position (models with “keyless access with push-button start system”). & Disarming the System s02af05 Perform either of the following procedures. . Briefly press unlock/disarm button (for less than 2 seconds) on the access key fob/remote transmitter. . Carry the access key fob and perform either of the following procedures (models with “keyless access with push-button start system”). – Grip the front door handle. – Press the rear lock button. – Unlock using the PIN code access. The flashing of the security indicator light will then change slowly (once approximately every 3 seconds from twice approximately every 2 seconds), indicating that the alarm system has been disarmed. ! Emergency disarming s02af0501 If you cannot disarm the system using the access key fob/transmitter (i.e., the transmitter is lost, broken or the transmitter battery is too weak), you can disarm the system without using the access key fob/ 134 Alarm System remote transmitter. The system can be disarmed if you turn the ignition switch from the “LOCK”/“OFF” position to the “ON” position with a registered key/access key fob. NOTE For models with “keyless access with push-button start system”, if the access key fob battery is discharged, perform the procedure described in “Switching Power Status” P441. In such a case, replace the battery immediately. Refer to “Replacing Battery of Access Key Fob” P497. & Alarm System Setting s02af11 To change the setting of your vehicle’s alarm system for activation or deactivation, do the following. 1. Disarm the alarm system. Refer to “Disarming the System” P134. 2. Sit in the driver’s seat and shut all doors, the rear gate and engine hood. 3. Turn the ignition switch to the “ON” position. 4. Hold down “ ” of the driver’s power door locking switch, open the driver’s door within the following 1 second, and wait 10 seconds without releasing the switch. The setting will then be changed as follows. Setting status Combination meter display (color LCD) Horn Activate AL ON Once Deactivate AL OFF Twice NOTE You may have the above setting change done by your SUBARU dealer. & If You Have Accidentally Triggered the Alarm System s02af03 ! To stop the alarm s02af0301 Do any of the following operations: . Press any button on the access key fob/ remote transmitter. . Turn the ignition switch to the “ON” position (models without “keyless access with push-button start system”). . Turn the push-button ignition to the “ACC” position (models with “keyless access with push-button start system”). NOTE Only registered keys will stop the alarm. If the immobilizer transponder is not registered, the alarm will not stop. & Valet Mode s02af06 When you choose the valet mode, the alarm system does not operate. In valet mode, the remote transmitter is used only for locking and unlocking the doors and panic activation. To enter the valet mode, change the setting of your vehicle’s alarm system to deactivation mode. Refer to “Alarm System Setting” P135. The security indicator light will continue to flash once every 3 seconds, indicating that the system is in the valet mode. To exit valet mode, change the setting of your vehicle’s alarm system to activation mode. Refer to “Alarm System Setting” P135. Alarm System 135 2 Keys and Doors 2-7. Child Safety Locks s02ag WARNING Always turn the child safety locks to the “LOCK” position when children sit on the rear seat. Serious injury could result if a child accidentally opens the door and falls out. Each rear door has a child safety lock. When the child safety lock lever is in the “LOCK” position, the door cannot be opened from inside. The door can only be opened from the outside. 2-8. Windows s02ah WARNING To avoid serious personal injury caused by entrapment, always conform to the following instructions without exception. . When operating the power windows, be extremely careful to prevent anyone’s body parts or any other objects from being caught in the window. . Always lock the passengers’ windows using the lock switch when children are riding in the vehicle. . Always carry the key when you leave the vehicle for safety reasons and never allow an unattended child to remain in the vehicle. Failure to follow this procedure could result in injury to a child operating the power window. NOTE . If the power window system detects resistance, an impact or abnormality, the window operation may be automatically stopped to prevent further jamming, entrapment or malfunction. – The closing window slides down slightly and stops. – The opening window stops sliding down. . The power window system may detect resistance, an impact or an abnormality in the following cases. – A substantial sized object is caught between the window and the window frame. – A foreign object is caught between the window and the window frame. – The vehicle drives over a deep pothole. . The window cannot be closed for a few seconds after the window is automatically stopped by the system. 136 Child Safety Locks & Power Window Operation s02ah07 ! Power window switches s02ah0701 . Driver’s side power window switches: 1 For front left window* 2 For front right window* 3 For rear left window 4 For rear right window 5 Lock switch *: With one-touch auto up and down feature All door windows can be controlled by the power window switch cluster on the driver side door. The switch illuminates when operated. . Passenger’s side power window switches: Each passenger’s window can be controlled by the power window switch located on the door. The switch illuminates when operated. ! Operating the window s02ah0702 With one-touch auto up and down feature 1 Automatically close* 2 Close 3 Open 4 Automatically open* *: To stop the window halfway, operate the switch to the opposite side. – CONTINUED – Windows 137 2 Keys and Doors Without one-touch auto up and down feature 1 Close 2 Open NOTE Avoid the following. . Continuously operating a switch in the same direction after the window is fully closed or fully opened. . Continuously operating three or more switches all at once in the same direction after the windows are fully closed or fully opened. Either of the operations described above may cause the power window breaker to operate making it impossible to open or close the window. Be sure to initialize the power windows. Refer to “Initialization of Power Window (Windows with One-Touch Auto Up and Down Function)” P139. ! Anti-entrapment function (windows with one-touch auto up and down function) s02ah0703 While closing the window automatically, if the window senses a substantial enough object trapped between the window and the window frame, it automatically moves down slightly and stops. If a foreign object is caught while window is opening automatically, the window will stop. CAUTION . Never attempt to test the power window operation using body parts. . If an object is caught just before the window fully closes, the system may not operate properly. NOTE . If a window detects an impact similar to that caused by trapping an object (for example, when the vehicle encounters a deep pothole), the antientrapment function may operate. . You cannot close the window for a few seconds after the anti-entrapment function operates. ! Off delay function (windows with one-touch auto up and down function) s02ah0705 The windows can be operated for approximately 40 seconds even after the ignition switch is turned to the “ACC” or “OFF” position. If a front door is opened within 40 seconds, the off delay function is canceled. ! Locking the passengers’ windows s02ah0704 1 Lock 2 Unlock When the lock switch is in the lock position, the rear passenger’s window switches on the driver side door and the passengers’ 138 Windows window switches cannot be operated. When the indicator on the window switches does not illuminate, the window switch cannot be operated. & Initialization of Power Window (Windows with One- Touch Auto Up and Down Function) s02ah06 If the one-touch auto up and down function or off delay function does not operate properly, operate each window according to the following procedure in order to initialize the power window system. 1. Close the door. 2. Turn the ignition switch to the “ON” position. 3. Open the window completely and then press and hold down the power window switch for approximately 1 second. 4. Close the window completely and then pull and hold the power window switch for approximately 1 second. 2-9. Rear Gate s02aj CAUTION When loading and unloading cargo, be careful not to come in contact with the hot engine exhaust gas or the exhaust pipe, because they could burn you. NOTE Avoid keeping the rear gate open for more than a few hours. Doing so may drain the vehicle battery. The rear gate can be locked and unlocked using any of the following systems. . Power door locking switch: Refer to “Locking and Unlocking from the Inside” P130. . Keyless access with the push-button start system: Refer to “Keyless Access with Push-Button Start System” P108. . Remote keyless entry system: Refer to “Remote Keyless Entry System” P124. . Locking and unlocking from the outside with the emergency key (models with double locking system): Refer to “Locking and Unlocking from the Outside” P128. Opening the rear gate: Rear gate opener button 1. Unlock the rear gate. 2. Press and hold the rear gate opener button. The rear gate will open slightly. 3. Hold the rear gate and lift it up slowly. NOTE If the rear gate cannot be opened due to a discharged vehicle battery, a malfunction in the door locking/unlocking system or other causes, you can unlock it by manually operating the rear gate lock release lever. For the procedure, refer to “Rear Gate – If the Rear Gate Cannot Be Opened” P442. – CONTINUED – Rear Gate 139 2 Keys and Doors Closing the rear gate: Lower the rear gate slowly and push down firmly until the latch engages. The rear gate can be lowered easily if you pull down on the inside handle as shown in the illustration. WARNING . To prevent dangerous exhaust gas from entering the vehicle, always keep the rear gate closed while the engine is running. . Do not attempt to shut the rear gate while holding the recessed grip. Also do not close the rear gate by pulling the grip from inside the cargo space. There is a danger of your hand being caught and injured. CAUTION . Do not jam a plastic bag in or place cellophane tape on the rear gate stays or scratch the stays while loading or unloading cargo. That could cause leakage of gas from the stays, which may result in their inability to hold the rear gate open. . Be careful not to hit your head or face on the rear gate when opening or closing the rear gate and when loading or unloading cargo. . Never attempt to close the rear gate by grabbing or pressing on the outer metal surface or damage may result. . Always use the inside handle to avoid damaging the exterior surface of the gate. 2-10. Moonroof (If Equipped) s02ak WARNING Never let anyone’s hands, arms, head or any objects protrude from the moonroof. A person could be seriously injured if any of the following conditions occur. . The vehicle stops suddenly. . The vehicle turns sharply. . The vehicle is involved in an accident. . Body parts protruding from the vehicle are struck by outside objects. To avoid serious personal injury caused by entrapment, always conform to the following instructions without exception. . Before closing the moonroof, make sure that no one’s hands, arms, head or other objects will be accidentally caught in the moonroof. . Always carry the key when you leave the vehicle for safety reasons and never allow an unattended child to remain in the 140 Moonroof vehicle. Failure to follow this procedure could result in injury to a child operating the moonroof. . Never try to check the anti-entrapment function by deliberately placing part of your body in the moonroof. CAUTION . Do not sit on the edge of the open moonroof. . Do not operate the moonroof if falling snow or extremely cold conditions have caused it to freeze shut. . The anti-entrapment function does not operate when the moonroof is being tilted down. Be sure to confirm that it is safe to tilt the moonroof down before doing so. . If the moonroof does not close, have the system checked by a SUBARU dealer. The moonroof has both tilting and sliding functions. The moonroof operates only when the ignition switch is in the “ON” position. & Moonroof Switches s02ak02 ! Tilting moonroof s02ak0201 1 Up 2 Down To raise the moonroof, press and hold the switch in the up side and release. To lower the moonroof, press and hold the switch in the down side. NOTE Release the switch after the moonroof has been raised or has been lowered completely. Pressing the switch continuously may cause damage to the moonroof. ! Sliding moonroof s02ak0202 1 Open 2 Close Opening the moonroof: To open the moonroof using the automatic function, press and hold the open side of the switch and then release it. To stop the moonroof at a selected midway position while opening it, momentarily press the open or close side of the switch. The sunshade will also be opened together with the moonroof. The moonroof will stop at a position approximately 0.6 in (1.5 cm) away from the fully opened position. Press the open side of the switch again to open the moonroof completely. – CONTINUED – Moonroof 141 2 Keys and Doors Closing the moonroof: To close the moonroof using the automatic function, press and hold the close side of the switch and then release it. To stop the moonroof at a selected midway position while closing it, momentarily press the open or close side of the switch. NOTE . After washing the vehicle or after it rains, wipe away water on the roof prior to opening the moonroof to prevent drops of water from falling into the passenger compartment. . Driving with the moonroof fully open can cause an annoying sound to be generated at high speeds. If this occurs, use the moonroof at the initial stop position of 0.6 in (1.5 cm) away from the fully opened position. . For the sake of safety, it is recommended that you avoid driving with the moonroof fully opened. ! Anti-entrapment function s02ak0203 When the moonroof senses a substantial enough object trapped between its glass and the vehicle’s roof during closure, it automatically moves back to the fully open position and stops there. The anti-entrapment function may also be activated by a strong shock on the moonroof even when there is nothing trapped. CAUTION Never attempt to test this function using fingers, hands or other parts of your body. NOTE For the sake of safety, it is recommended that you avoid driving with the moonroof fully opened. & Sunshade s02ak05 The sunshade can be slid forward or backward by hand while the moonroof is closed. If the moonroof is opened, the sunshade also moves back. 142 Moonroof———————————————— — — — — — — — — — — — — — — — — s03 3-1. Ignition Switch (Models without Push- Button Start System) 148 Key Positions . 148 Key Reminder Chime 149 Ignition Switch Light. 149 3-2. Push-Button Ignition Switch (Models with Push-Button Start System) 150 Safety Precautions 150 Operating Range for Push-Button Start System. 150 Switching Power Status 151 When Access Key Fob Does Not Operate Properly . 152 3-3. Hazard Warning Flasher. 152 3-4. Meters and Gauges 152 Speedometer 152 Tachometer. 153 Odometer . 153 Double Trip Meter . 153 Fuel Gauge. 154 Engine Coolant Temperature Gauge 154 Combination Meter Settings 155 3-5. Illumination Brightness Control 155 Auto Dimmer Cancel Function 156 3-6. Warning and Indicator Lights 156 Seatbelt Warning Light and Chime 157 SRS Airbag System Warning Light 160 Front Passenger’s Frontal Airbag ON and OFF Indicators Light 160 CHECK ENGINE Warning Light/Malfunction Indicator Light 161 Charge Warning Light . 162 Oil Pressure Warning Light 162 Engine Low Oil Level Warning Light . 162 AT OIL TEMP Warning Light . 162 Low Tire Pressure Warning Light (U.S.-Spec. Models) 163 ABS Warning Light. 164 Brake System Warning Light 165 Electronic Parking Brake Indicator Light. 166 Auto Vehicle Hold Indicator Light . 167 Low Fuel Warning Light . 167 Door Open Indicator Light 168 Engine Hood Open Warning Light 168 Windshield Washer Fluid Warning Light . 168 All-Wheel Drive Warning Light 168 Power Steering Warning Light 168 Vehicle Dynamics Control Warning Light/ Vehicle Dynamics Control Operation Indicator Light 169 Vehicle Dynamics Control OFF Indicator Light 170 Warning Chimes and Warning Indicator of the Keyless Access with Push-Button Start System (If Equipped) 170 Security Indicator Light 175 SI-DRIVE Indicator 176 Select Lever/Gear Position Indicator. 176 Turn Signal Indicator Lights . 176 High Beam Indicator Light 176 High Beam Assist Indicator 176 Automatic Headlight Beam Leveler Warning Light 176 LED Headlight Warning Light . 177 Instruments and Controls 3 Instruments and Controls Steering Responsive Headlight OFF Indicator Light 177 Steering Responsive Headlight Warning Light . 177 Headlight Indicator Light. 177 Front Fog Light Indicator Light (If Equipped). 177 Auto Start Stop Warning Light (Yellow) . 177 Auto Start Stop OFF Indicator Light 177 Auto Start Stop Indicator Light (Green) . 177 Auto Start Stop No Activity Detected Indicator Light 178 X-MODE Indicator . 178 Hill Descent Control Indicator Light 178 BSD/RCTA Warning Indicator (If Equipped) 178 BSD/RCTA OFF Indicator (If Equipped) 178 Icy Road Surface Warning Indicator 178 RAB Warning Indicator (If Equipped). 179 RAB OFF Indicator (If Equipped) . 179 Sonar Audible Alarm OFF Indicator (If Equipped). 179 Driver Monitoring System Operation Indicator Light (Green) (If Equipped) 179 Driver Monitoring System Warning Light (Yellow) (If Equipped) 179 Driver Monitoring System OFF Indicator Light (If Equipped). 179 Driver Monitoring System Temporary Stop Indicator Light (If Equipped) 180 3-7. Combination Meter Display (Color LCD) 180 Basic Operation 181 Welcome Screen (Opening Animation) and Good-Bye (Ending Animation) Screen . 181 Warning Screen 182 Meter Information Screen . 182 Telltale Screen . 184 Basic Screens 185 Digital Speed Screen 188 3-8. Center Information Display (CID) .188 Features 188 Welcome Screen 189 Good-Bye Screen . 189 Interruption Screen 190 Touch Screen Operations . 190 11.6-Inch Display Models 190 Dual 7.0-Inch Display Models (If Equipped) . 213 3-9. Clock 227 Setting the Clock Manually . 227 Setting the Clock Automatically 228 Time Zone (Models with Navigation System). 229 Daylight Saving Time (Models with Navigation System) . 229 3-10. Valet Mode .230 Activation of Valet Mode. 230 Deactivation of Valet Mode . 231 3-11. Light Control Switch .231 Headlights . 232 High/Low Beam Change (Dimmer) 234 Headlight Flasher . 235 High Beam Assist Function 235 Daytime Running Light System 238 3-12. Steering Responsive Headlight (SRH).238 3-13. Headlight Beam Leveler240 3-14. Front Fog Light Switch (If Equipped) 240 Instruments and Controls 3-15. Turn Signal Lever . 241 One-Touch Lane Changer . 241 3-16. Wiper and Washer 241 Windshield Wiper and Washer Switches 243 Rear Window Wiper and Washer Switch 244 3-17. Defogger and Deicer. 246 3-18. Mirrors . 247 Inside Mirror (without Auto-Dimming Function) (If Equipped). 247 Auto-Dimming Mirror/Compass (If Equipped) 248 Auto-Dimming Mirror/Compass with HomeLink® (If Equipped) 249 Outside Mirrors 256 3-19. Tilt/Telescopic Steering Wheel .257 Heated Steering Wheel System (If Equipped) 258 3-20. Horn259 Instruments and Controls 3 Instruments and Controls 3-1. Ignition Switch (Models without Push-Button Start System) s03aa WARNING . Never turn the ignition switch to “LOCK” while the vehicle is being driven or towed because that will lock the steering wheel, preventing steering control. And when the engine is turned off, it takes a much greater effort than usual to steer. . Before leaving the vehicle, always remove the key from the ignition switch for safety and never allow an unattended child to remain in the vehicle. Failure to follow this procedure could result in injury to a child or others. Children could operate the power windows, the moonroof or other controls or even make the vehicle move. CAUTION Do not attach a large key holder or key case to either key. If it banged against your knees or hands while you are driving, it could turn the ignition switch from the “ON” position to the “ACC” or “LOCK” position, thereby stopping the engine. Also, if the key is attached to a key holder or to a large bunch of other keys, centrifugal force may act on it as the vehicle moves, resulting in unwanted turning of the ignition switch. The ignition switch has four positions: LOCK, ACC, ON and START. NOTE . Keep the ignition switch in the “LOCK” position when the engine is not running. . Using electrical accessories for a long time with the ignition switch in the “ON” or “ACC” position can cause the battery to go dead. . If the ignition switch will not move from the “LOCK” position to the “ACC” position, turn the steering wheel slightly to the left and right as you turn the ignition switch. & Key Positions s03aa11 Position Description LOCK The key can only be inserted or removed in this position. The ignition switch will lock the steering wheel when you remove the key. ACC In this position the electrical accessories (audio, accessory power outlet, etc.) can be used. ON This is the normal operating position after starting the engine. START The engine is started in this position. CAUTION Do not turn the ignition switch to the “START” position while the engine is running. 148 Ignition Switch (Models without Push-Button Start System) NOTE . To turn the key from the “ACC” to “LOCK” position: – Place the select lever in the “P” position. – Push in and turn the key. . If your registered key fails to start the engine, pull out the key once (the security indicator light will blink), and then insert the key again and turn it to the “START” position again to restart the engine. . The engine may not start in the following cases: – The key grip is touching another key or a metallic key holder. – The key is near another key that contains an immobilizer transponder. – The key is near or touching another transmitter. & Key Reminder Chime s03aa05 The reminder chime sounds when the driver’s door is opened and the ignition switch is in the “LOCK” or “ACC” position. The chime stops under the following conditions. . The ignition switch is turned to the “ON” position. . The key is removed from the ignition switch. . The driver’s door is closed. & Ignition Switch Light s03aa06 For easy access to the ignition switch in the dark, the ignition switch light illuminates when driver’s door is opened or when the driver’s door is unlocked using the remote keyless entry transmitter. The light remains illuminated for approximately 30 seconds and gradually turns off under the following conditions. . The driver’s door is closed. . The doors are unlocked using the remote keyless entry transmitter. – CONTINUED – Ignition Switch (Models without Push-Button Start System) 149 3 Instruments and Controls The light gradually turns off under the following conditions. . The ignition switch is turned to the “ON” position. . The doors are locked using the remote keyless entry transmitter. 3-2. Push-Button Ignition Switch (Models with Push- Button Start System) s03bg & Safety Precautions s03bg04 Refer to “Safety Precautions” P109. & Operating Range for Push- Button Start System s03bg01 1 Antennas 2 Operating range NOTE . If the access key fob is not detected within the operating range of the antennas inside the vehicle, the push-button ignition switch and the engine start cannot be operated. . Even when the access key fob is outside the vehicle, if it is placed too close to the glass, it may be possible to switch the power or to start the engine. . Do not leave the access key fob in the following places. It may become impossible to operate the pushbutton ignition switch and the engine start. – On the instrument panel – On the floor – Inside the glove box – Inside the door trim pocket – On the rear seat – At the corner of the cargo area . When operating the push-button ignition switch or starting the engine, if the access key fob battery is discharged, perform the procedure described in “Access Key Fob – If Access Key Fob Does Not Operate Properly” P441. In such a case, replace the battery immediately. Refer to “Replacing Battery of Access Key Fob” P497. 150 Push-Button Ignition Switch (Models with Push-Button Start System) & Switching Power Status s03bg02 1 Operation indicator 2 Push-button ignition switch The power status is switched every time the push-button ignition switch is pressed. 1. Carry the access key fob, and sit in the driver’s seat. 2. Make sure the select lever is in the “P” position. 3. Press the push-button ignition switch without depressing the brake pedal. Every time the button is pressed, the power is switched in the sequence of “OFF”, “ACC”, “ON” and “OFF”. When the engine is stopped and the pushbutton ignition switch is in “ACC” or “ON”, the operation indicator on the push-button ignition switch illuminates in orange. Power status Indicator color Operation OFF Turned off Power is turned off. ACC Orange The following systems can be used: audio and accessory power outlet. ON Orange (while engine is stopped) All electrical systems can be Turned off used. (while engine is running) CAUTION . To prevent the vehicle battery from discharging, do not leave the push-button ignition switch in the “ON” or “ACC” position for a long time. . To avoid a malfunction, observe the following precautions. – Do not spill drinks or other liquids on the push-button ignition switch. – Do not touch the push-button ignition switch with a hand that is soiled with oil or other contaminants. . If the push-button ignition switch does not operate smoothly, stop the operation. Contact a SUBARU dealer immediately. . If the operation indicator on the push-button ignition switch does not illuminate even when the instrument panel illumination is turned on, have the vehicle inspected at a SUBARU dealer. . If the vehicle was left in the hot sun for a long time, the surface of the push-button ignition switch may get hot. Be careful not to burn yourself. NOTE . When operating the push-button ignition switch, firmly press it all the way. . If the push-button ignition switch is pressed quickly, the power may not turn on or off. . If the indicator light on the pushbutton ignition switch flashes in green when the push-button ignition switch is pressed, steering is – CONTINUED – Push-Button Ignition Switch (Models with Push-Button Start System) 151 3 Instruments and Controls locked. When this occurs, press the push-button ignition switch while turning the steering wheel left and right. ! Battery drainage reduction function s03bg0201 When the push-button ignition switch is left in the “ACC” position for approximately 20 minutes or the “ON” position (the engine is not running) for approximately 1 hour, the push-button ignition switch will be automatically switched to “OFF” to reduce the possibility of the battery going dead. (This function is activated when the select lever is in the “P” position.) & When Access Key Fob Does Not Operate Properly s03bg03 Refer to “Access Key Fob – If Access Key Fob Does Not Operate Properly” P441. 3-3. Hazard Warning Flasher s03ab The hazard warning flasher is used to warn other drivers when you have to park your vehicle under emergency conditions. The hazard warning flasher works with the ignition switch in any position. To turn on the hazard warning flasher, press the hazard warning flasher switch on the instrument panel. All the turn signal lights and the turn signal indicator lights will flash. To turn off the flasher, press the switch again. NOTE When the hazard warning flasher is on, the turn signals do not work. 3-4. Meters and Gauges s03ad NOTE Liquid crystal displays are used in some of the meters and gauges in the combination meter. You will find their indications hard to see if you wear polarized glasses. & Speedometer s03ad03 The speedometer shows the vehicle speed. NOTE The initial movement of the meter needles and gauge needles that occurs when the ignition switch is turned to the “ON” position can be activated or deactivated. For details, refer to “General settings” P198 (11.6-inch display models) or “General settings” P215 (dual 7.0- inch display models). 152 Hazard Warning Flasher & Tachometer s03ad06 The tachometer shows the engine speed in thousands of revolutions per minute. CAUTION Do not operate the engine with the pointer of the tachometer in the red zone. In this range, fuel injection will be cut by the engine control module to protect the engine from overrevving. The engine will resume running normally after the engine speed is reduced below the red zone. NOTE The initial movement of the meter needles and gauge needles that occurs when the ignition switch is turned to the “ON” position can be activated or deactivated. For details, refer to “General settings” P198 (11.6-inch display models) or “General settings” P215 (dual 7.0- inch display models). & Odometer s03ad04 1 TRIP RESET switch 2 Odometer This meter displays the odometer when the ignition switch is in the “ON” position. The odometer shows the total distance that the vehicle has been driven. NOTE If you press the TRIP RESET switch when the ignition switch is in the “LOCK”/“OFF” or “ACC” position, the odometer/trip meter will light up. The indicators will turn off when the TRIP RESET switch is not operated for approximately 10 seconds. & Double Trip Meter s03ad05 1 TRIP RESET switch 2 Trip meter This meter displays the two trip meters when the ignition switch is in the “ON” position. The trip meter shows the distance that the vehicle has been driven since you last set it to zero. The display can be switched as shown in the following sequence by pressing the TRIP RESET switch. – CONTINUED – Meters and Gauges 153 3 Instruments and Controls To reset the trip meter, select either the A trip or B trip meter, then press and hold the TRIP RESET switch. CAUTION To ensure safety, do not attempt to change the function of the indicator during driving, as an accident could result. NOTE . If the connection between the combination meter and battery is broken for any reason such as vehicle maintenance or fuse replacement, the data recorded on the trip meter will be lost. . If you press the TRIP RESET switch when the ignition switch is in the “LOCK”/“OFF” or “ACC” position, the odometer/trip meter will light up. It is possible to switch between the A trip meter and B trip meter indications while the odometer/trip meter is lit up. In addition, it is possible to reset the trip meter by pressing and holding the TRIP RESET switch. The indicators will turn off when the TRIP RESET switch is not operated for approximately 10 seconds. & Fuel Gauge s03ad07 The fuel gauge shows the approximate amount of fuel remaining in the tank. When the ignition switch is in the “LOCK”/ “OFF” or “ACC” position, the fuel gauge shows “E” even if the fuel tank contains fuel. The gauge may move slightly due to fuel level movement in the tank (e.g., during braking, turning or acceleration). NOTE . You will see the “ ” sign in the fuel gauge. This indicates that the fuel filler lid is located on the right side of the vehicle. . If you press the TRIP RESET switch while the ignition switch is in the “LOCK”/“OFF” or “ACC” position, the fuel gauge will light up and indicate the amount of fuel remaining in the tank. The gauge will turn off when the TRIP RESET switch is not operated for approximately 10 seconds. & Engine Coolant Temperature Gauge s03ad08 1 Normal operating range The temperature gauge shows engine coolant temperature when the ignition switch is in the “ON” position. The coolant temperature will vary in accordance with the outside temperature and driving conditions. 154 Meters and Gauges We recommend that you drive moderately until the pointer of the temperature gauge reaches near the middle of the range. Engine operation is optimum with the engine coolant at this temperature range and high revving operation when the engine is not warmed up enough should be avoided. CAUTION If the pointer exceeds the normal operating range, safely stop the vehicle as soon as possible. Refer to “Engine Overheating” P435. & Combination Meter Settings s03ad16 Meter settings can be set on the center information display. For details, perform the procedures described in “General settings” P198 (11.6-inch display models) or “General settings” P215 (dual 7.0-inch display models). 3-5. Illumination Brightness Control s03aj The illumination brightness of the combination meter and center information display dims under the following conditions. . The light switch is in the “ ” or “ ” position when the ambient light is dark. . The light switch is in the “AUTO” position and the headlights illuminate automatically. You can adjust the illumination brightness for better visibility. To brighten, turn the control dial upward. To darken, turn the control dial downward. NOTE . When the control dial is turned fully upward, the illumination brightness becomes the maximum and the automatic dimming function does not work at all. . The brightness setting is not canceled even when the ignition switch is turned to the “LOCK”/“OFF” position. . The operation method of illumination brightness will differ depending whether or not “Brightness Dial” in the center information display is on. Refer to the operation method indicated the following table. “Brightness Dial” is on. Operational item Combination meter Center information display Control dial Available Available “Brightness”*1 on the center information display Not available Not available – CONTINUED – Illumination Brightness Control 155 3 Instruments and Controls “Brightness Dial” is off. Operational item Combination meter Center information display Control dial Available Not available “Brightness” on the center information display Not available Available *1: When “Brightness Dial” is on, “Brightness” on the center information display is not available. For details about “Brightness Dial” on/ off settings, refer to “General settings” P198 (11.6-inch display models) or “General settings” P215 (dual 7.0- inch display models). & Auto Dimmer Cancel Function s03aj01 When the ambient light is bright, the illumination brightness is set to the maximum regardless of the position of the control dial. In this case, you cannot adjust the illumination brightness by using the control dial. When the ambient light is dark, you can dim the illumination brightness as described above. The operational/non-operational setting and sensitivity of the auto dimmer cancel function can be changed by your SUBARU dealer. Contact your SUBARU dealer for details. 3-6. Warning and Indicator Lights s03ae Several of the warning and indicator lights illuminate momentarily and then go out when the ignition switch is initially turned to the “ON” position. This permits checking the operation of the bulbs. Apply the parking brake and turn the ignition switch to the “ON” position. For the system check, the following lights illuminate and turn off after several seconds or after the engine has started: : Seatbelt warning light (The seatbelt warning light turns off only when the driver fastens the seatbelt.)/Front passenger’s seatbelt warning light (The seatbelt warning light turns off only when the front seat passenger fastens the seatbelt.) : Rear seatbelt warning light : SRS airbag system warning light : Front passenger’s frontal airbag ON indicator light : Front passenger’s frontal airbag OFF indicator light / : CHECK ENGINE warning light/ Malfunction indicator light 156 Warning and Indicator Lights : Charge warning light : Oil pressure warning light : Engine low oil level warning light / : ABS warning light : Vehicle Dynamics Control warning light/ Vehicle Dynamics Control operation indicator light : Vehicle Dynamics Control OFF indicator light / : Brake system warning light : Electronic parking brake indicator light : Power steering warning light : Low tire pressure warning light (U.S.- spec. models) : Low fuel warning light : Auto Start Stop warning light (yellow) If any lights fail to illuminate, it indicates a burned-out bulb or a malfunction of the corresponding system. Consult your authorized SUBARU dealer for repair. & Seatbelt Warning Light and Chime s03ae01 Your vehicle is equipped with a seatbelt warning device at the driver’s and passenger’s seat, as required by current safety standards. ! Driver’s and front passenger’s seats s03ae0114 With the ignition switch turned to the “ON” position, this device reminds the driver and front passenger to fasten their seatbelts by illuminating the warning lights in the locations indicated in the following illustration and sounding a chime. Driver’s warning light Front passenger’s warning light ! Operation s03ae011401 When the ignition switch is turned to the “ON” position, the driver’s and/or front passenger’s warning light will illuminate, then it will blink for several seconds. If the seatbelt of the driver’s seat is not fastened, the warning chime may make a peep sound. NOTE . If the driver’s and/or front passenger’s seatbelt(s) are/is not fastened while driving, the seatbelt warning system operates as follows according to the vehicle speed. – The warning light will illuminate when driving approximately 4 mph (6 km/h) or less. – CONTINUED – Warning and Indicator Lights 157 3 Instruments and Controls – The warning light will blink, and the warning chime will make a peep sound when driving between approximately 4 mph (6 km/h) and 13 mph (20 km/h). The warning chime will stop when the vehicle stops. – The warning light will blink, and the warning chime will sound loudly when 15 seconds have elapsed while driving between approximately 4 mph (6 km/h) and 13 mph (20 km/h). – The warning light will blink, and the warning chime will sound loudly when driving approximately more than 13 mph (20 km/h). . The warning light will turn off and the warning chime will stop when the seatbelt is fastened. If there is no passenger on the front passenger’s seat, the seatbelt warning system for the front passenger’s seat will be deactivated. The front passenger’s seatbelt warning system monitors whether or not there is a passenger on the front passenger’s seat. CAUTION Observe the following precautions. Failure to do so may prevent the device from functioning correctly or cause the device to fail. . Do not install any accessory such as a table or TV onto the seatback. . Do not store a heavy load in the seatback pocket. . Do not allow the rear seat occupant to place his/her hands or legs on the front passenger’s seatback, or allow him/her to pull the seatback. . Do not use front seats with their backward-forward position and seatback not being locked into place securely. If any of them are not locked securely, adjust them again. For adjusting procedure, refer to “Front Seats” P30. If the seatbelt warning system for the front passenger’s seat does not function correctly (e.g., it is activated even when the front passenger’s seat is empty or it is deactivated even when the front passenger has not fastened his/her seatbelt), take the following actions. . Ensure that no article is placed on the seat other than a child restraint system and its child occupant, although we strongly recommend that all children sit in the rear seat properly restrained. . Ensure that there is no article left in the seatback pocket. . Ensure that the backward-forward position and seatback of front passenger’s seat are locked into place securely by moving the seat back and forth. If still the seatbelt warning system for front passenger’s seat does not function correctly after taking relevant corrective actions described above, immediately contact your SUBARU dealer for an inspection. 158 Warning and Indicator Lights ! Rear passenger’s seats s03ae0115 Rear seatbelt warning light 1 Rear left seat 2 Rear center seat 3 Rear right seat With the ignition switch turned to the “ON” position, the seatbelt warning light and chime reminds the rear passenger to fasten their seatbelt by illuminating the warning lights in the locations indicated in the above illustration and sounding a chime. WARNING . The driver must check that all the passengers have fastened their seatbelts properly since the seatbelt warning system may not detect passengers under the following circumstances. – When cushions or child restraint systems, etc., are used. – When a child or small adult is sitting in the seat. . Observe the following precautions – Do not apply any strong impact to the rear seat. – Do not fold the seatback forward when objects are on the seat. – Do not spill liquid on the rear seat. If liquid is spilled, wipe it off immediately. – Do not remove or disassemble the rear seat. NOTE . The seatbelt warning system of the rear seat detects if the seat is occupied by a passenger. Heavy cargo or large pets on the rear seat may result in the activation of the passenger seatbelt warning light and chime. Fastening the rear seatbelt prior to loading cargo or large pets will avoid activating the passenger seatbelt warning light and chime. . When folding the rear seat, ensure that the seat is empty prior to folding. Items caught between the seat bottom and seatback, when folded, may damage the seat surface or activate the passenger seatbelt warning light and chime. ! Operation s03ae011501 If passengers in the rear seats do not fasten their seatbelts while the ignition switch is turned to the “ON” position, the seatbelt warning lights will illuminate or blink to indicate that their seatbelts are not fastened. NOTE . If the rear passenger’s seatbelt(s) are/is still not fastened while driving, the seatbelt warning system operates as follows according to the vehicle speed. – The warning light will illuminate when driving approximately 4 mph (6 km/h) or less. – When driving approximately between 4 mph (6 km/h) and 13 mph (20 km/h), if the seatbelts are not fastened for 50 seconds, the seatbelt warning lights will blink – CONTINUED – Warning and Indicator Lights 159 3 Instruments and Controls and a warning chime will sound. The chime will make a peep sound for 15 seconds, and it then will become louder and continue for 35 seconds. The warning light will blink for 50 seconds, then it will illuminate steadily and the chime will stop. – When driving more than approximately 13 mph (20 km/h), if seatbelts are not fastened for 35 seconds, the warning lights of the unfastened seatbelts will blink and a chime will sound loudly. If the rear seatbelts are not fastened after 35 seconds, the blinking warning light will illuminate steadily and the chime will stop. The warning lights will continue to illuminate until their seatbelts are fastened. . The warning light will turn off and the warning chime will stop when the seatbelt is fastened. & SRS Airbag System Warning Light s03ae02 WARNING If the warning light exhibits any of the following conditions, immediately stop the vehicle in a safe place, and consult a SUBARU dealer. Unless a technician checks and repairs the system as needed, the seatbelt pretensioners and/or the SRS airbag will not operate properly in the event of a collision, which may result in injury. . Flashing or flickering of the warning light . No illumination of the warning light when the ignition switch is first turned to the “ON” position . Continuous illumination of the warning light . Illumination of the warning light while driving For details about the components monitored by the warning light, refer to “SRS Airbag System Monitors” P102. & Front Passenger’s Frontal Airbag ON and OFF Indicators Light s03ae03 : Front passenger’s frontal airbag ON indicator light : Front passenger’s frontal airbag OFF indicator light For details about the operating conditions of SRS seat cushion airbag, refer to “SUBARU Advanced Frontal Airbag System” P83. The front passenger’s frontal airbag ON and OFF indicator lights show you the status of the front passenger’s SRS frontal airbag. The indicators are located as shown in the illustration. When the ignition switch is turned to the 160 Warning and Indicator Lights “ON” position, both the ON and OFF indicators illuminate for 6 seconds during which time the system is checked. Following the system check, both indicators turn off for 2 seconds. After that, one of the indicators illuminates depending on the status of the front passenger’s SRS frontal airbag determined by the SUBARU advanced frontal airbag system monitoring. If the front passenger’s SRS frontal airbag is activated, the passenger’s frontal airbag ON indicator will illuminate while the OFF indicator will remain off. If the front passenger’s SRS frontal airbag is deactivated, the passenger’s frontal airbag ON indicator will remain off while the OFF indicator will illuminate. With the ignition switch turned to the “ON” position, if both the ON and OFF indicators remain illuminated or off simultaneously even after the system check period, the system is malfunctioning. Contact your SUBARU dealer immediately for an inspection. & CHECK ENGINE Warning Light/Malfunction Indicator Light s03ae04 CAUTION If the CHECK ENGINE warning light/ malfunction indicator light illuminates while you are driving, have your vehicle checked/repaired by your SUBARU dealer as soon as possible. Continued vehicle operation without having the emission control system checked and repaired as necessary could cause serious damage, which may not be covered by your vehicle’s warranty. If this light illuminates steadily or blinks while the engine is running, it may indicate that there is at least one problem or potential problem somewhere in the emission control system. ! If the light illuminates constantly s03ae0401 If the light illuminates constantly while driving or does not turn off after the engine starts, an emission control system malfunction has been detected. You should have your vehicle checked by an authorized SUBARU dealer immediately. NOTE This light also illuminates when the fuel filler cap is not tightened until it clicks. If you have recently refueled your vehicle, the cause of the CHECK ENGINE warning light/malfunction indicator light coming on could be a loose or missing fuel filler cap. Remove the cap and retighten it until it clicks. Make sure nothing is interfering with the sealing of the cap. Tightening the cap will not make the CHECK ENGINE warning light/malfunction indicator light turn off immediately. It may take several driving trips. If the light does not turn off, take your vehicle to your authorized SUBARU dealer immediately. ! If the light is blinking s03ae0402 If the light is blinking while driving, an engine misfire condition has been detected which may damage the emission control system. To prevent serious damage to the emission control system, you should conform to the following instructions. . Reduce vehicle speed. . Avoid hard acceleration. . Avoid steep uphill grades. . Reduce the amount of cargo, if possible. – CONTINUED – Warning and Indicator Lights 161 3 Instruments and Controls . Stop towing a trailer as soon as possible. The CHECK ENGINE warning light/malfunction indicator light may stop blinking and illuminate steadily after several driving trips. You should have your vehicle checked by an authorized SUBARU dealer immediately. & Charge Warning Light s03ae05 If this light illuminates when the engine is running, it may indicate that the charging system is not working properly. If the light illuminates while driving or does not turn off after the engine starts, stop the engine at the first safe opportunity and check the drive belt. If the drive belt is loose, broken or if the drive belt is in good condition but the light remains illuminated, contact your nearest SUBARU dealer immediately. & Oil Pressure Warning Light s03ae06 CAUTION Do not operate the engine with the oil pressure warning light on. This may cause serious engine damage. If this light illuminates when the engine is running, it may indicate that the engine oil pressure is low and the lubricating system is not working properly. If the light illuminates while driving or does not turn off after the engine starts, stop the engine at the first safe opportunity and contact your nearest SUBARU dealer immediately. & Engine Low Oil Level Warning Light s03ae58 This light appears when the engine oil level decreases to the lower limit. If the warning light appears, check the engine oil level on a level surface. When the engine oil level is not within the normal range, refill with engine oil. Refer to “Engine Oil” P465. After adding or changing the engine oil, warm up the engine and stop it on a level surface, then start the engine after a lapse of 1 minute or more. Confirm that the warning light has turned off after the engine has started. If the warning light does not turn off after refilling the engine oil, or the light appears even though the engine oil level is within the normal range, have the vehicle checked by a SUBARU dealer. NOTE . The oil level will be detected by the system just after turning the ignition switch to the “OFF” position. If the oil level is below the lower limit when the ignition switch is turned to the “ON” position, the engine low oil level warning light will turn on. . When the vehicle is parked on a steep slope, the engine low oil level warning light may not illuminate even if the oil level is below the lower limit to avoid erroneous lighting. & AT OIL TEMP Warning Light s03ae07 If this light illuminates when the engine is running, it may indicate that the transmission fluid temperature is too hot. If the light illuminates while driving, immediately stop the vehicle in a safe place and let the engine idle until the warning light turns off. ! Transmission control system warning s03ae0701 If the AT OIL TEMP warning light flashes after the engine has started, it may indicate that the transmission control system is not working properly. Contact your nearest 162 Warning and Indicator Lights SUBARU dealer for service immediately. & Low Tire Pressure Warning Light (U.S.- Spec. Models) s03ae08 When the ignition switch is turned to the “ON” position, the low tire pressure warning light will illuminate for approximately 2 seconds to check that the tire pressure monitoring system (TPMS) is functioning properly. If there is no problem and all tires are properly inflated, the light will go out. Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. (If your vehicle has tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label, you should determine the proper tire inflation pressure for those tires.) As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS) that illuminates a low tire pressure telltale when one or more of your tires is significantly underinflated. Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure. Driving on a significantly underinflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicle’s handling and stopping ability. Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver’s responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale. Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is combined with the low tire pressure telltale. When the system detects a malfunction, the telltale will flash for approximately one minute and then remain continuously illuminated. This sequence will continue upon subsequent vehicle start-ups as long as the malfunction exists. When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure as intended. TPMS malfunctions may occur for a variety of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS from functioning properly. Always check the TPMS malfunction telltale after replacing one or more tires or wheels on your vehicle to ensure that the replacement or alternate tires and wheels allow the TPMS to continue to function properly. Should the warning light illuminate steadily after blinking for approximately one minute, have the system inspected by your nearest SUBARU dealer as soon as possible. WARNING If this light does not illuminate briefly after the ignition switch is turned on or the light illuminates steadily after blinking for approximately one minute, you should have your Tire Pressure Monitoring System checked at a SUBARU dealer as soon as possible. If this light illuminates while driving, never brake suddenly. Instead, perform the following procedure. Otherwise an accident involving serious vehicle damage and serious personal injury could occur. 1) Keep driving straight ahead while gradually reducing speed. 2) Slowly pull off the road to a safe place. – CONTINUED – Warning and Indicator Lights 163 3 Instruments and Controls 3) Check the pressure for all four tires and adjust the pressure to the COLD tire pressure shown on the tire inflation pressure label on the door pillar on the driver’s side. If this light still illuminates while driving after adjusting the tire pressure, a tire may have significant damage and a fast leak that causes the tire to lose air rapidly. If you have a flat tire, refer to “Flat Tires” P429. When a replacement tire is mounted or a wheel rim is replaced without the original pressure sensor/transmitter being transferred, the Low tire pressure warning light will illuminate steadily after blinking for approximately one minute. This indicates the TPMS is unable to monitor all four road wheels. Contact your SUBARU dealer as soon as possible for tire and sensor replacement and/ or system resetting. If the light illuminates steadily after blinking for approximately one minute, promptly contact a SUBARU dealer to have the system inspected. CAUTION The tire pressure monitoring system is NOT a substitute for manually checking tire pressure. The tire pressure should be checked periodically (at least monthly) using a tire gauge. After any change to tire pressure(s), the tire pressure monitoring system will not re-check tire inflation pressures until the vehicle is first driven more than 20 mph (32 km/h). After adjusting the tire pressures, increase the vehicle speed to at least 20 mph (32 km/h) to start the TPMS re-checking of the tire inflation pressures. If the tire pressures are now above the severe low pressure threshold, the low tire pressure warning light should turn off a few minutes later. Therefore, be sure to install the specified size for the front and rear tires. & ABS Warning Light s03ae09 CAUTION . If any of the following conditions occur, we recommend that you have the ABS repaired at the first available opportunity by your SUBARU dealer. – The warning light does not illuminate when the ignition switch is turned to the “ON” position. – The warning light illuminates when the ignition switch is turned to the “ON” position, but it does not turn off even after starting the vehicle. – The warning light illuminates during driving. . When the warning light is on (and brake system warning light is off), the ABS function shuts down; however, the conventional brake system continues to operate normally. The ABS warning light illuminates together with the brake system warning light if the EBD system malfunctions. For further details of the EBD system malfunction warning, refer to “Brake System Warning Light” P165. NOTE If the warning light behavior is as described in the following conditions, the ABS may be considered normal. . The warning light illuminates right 164 Warning and Indicator Lights after the engine is started but turns off immediately, remaining off. . The warning light remains illuminated after the engine has been started, but it turns off while driving. . The warning light illuminates during driving, but it turns off immediately and remains off. When driving with an insufficient battery voltage such as when the engine is jump started, the ABS warning light may illuminate. This is due to the low battery voltage and does not indicate a malfunction. When the battery becomes fully charged, the light will turn off. & Brake System Warning Light s03ae10 WARNING . Driving with the brake system warning light on is dangerous. This indicates your brake system may not be working properly. If the light remains illuminated, have the brakes inspected by a SUBARU dealer immediately. . If at all in doubt about whether the brakes are operating properly, do not drive the vehicle. Have your vehicle towed to the nearest SUBARU dealer for repair. . If the brake system warning light illuminates, the electronic parking brake system may be malfunctioning. Immediately stop your vehicle in a safe location, use tire stops under the tires to prevent the vehicle from moving and contact your SUBARU dealer. For details, refer to “Electronic Parking Brake” P345. NOTE . Even if the brake system warning light illuminates, if the warning light behavior is as described in the following examples, the electronic parking brake system is not malfunctioning. – The warning light turns off when the electronic parking brake is applied or released. – The warning light turns off when the ignition switch is turned to the “ON” position again. . The brake system warning light may illuminate immediately after the engine is started. However, it is not malfunctioning if the warning light turns off after the electronic parking brake is released. . The brake system warning light may illuminate after the electronic parking brake is frequently applied and released. However, the electronic parking brake system is not malfunctioning if the light turns off after a short period of time. . When the engine is started while the electronic parking brake is applied/ released, the system may judge an abnormal situation and the warning light may illuminate. If the warning light illuminates, turn the ignition switch once to the “LOCK”/“OFF” position and then restart the engine. Then, apply/release the electronic parking brake. If the warning light turns off, the system will be restored. This light has the following functions. ! Brake fluid level warning s03ae1002 This light illuminates when the brake fluid level has dropped to near the “MIN” level of the brake fluid reservoir with the ignition switch in the “ON” position and with the parking brake fully released. If the brake system warning light should illuminate while driving (with the parking brake fully released and with the ignition switch positioned in “ON”), it could be an indication of leaking of brake fluid or worn – CONTINUED – Warning and Indicator Lights 165 3 Instruments and Controls brake pads. If this occurs, immediately stop the vehicle at the nearest safe place and check the brake fluid level. If the fluid level is below the “MIN” mark in the reservoir, do not drive the vehicle. Have the vehicle towed to the nearest SUBARU dealer for repair. ! Electronic Brake Force Distribution (EBD) system warning s03ae1003 If the warning light remains on even though the parking brake is released, the brake fluid level may be low or there could be a problem with the EBD system. Park the vehicle in a safe place immediately and contact a SUBARU dealer. ! Electronic brake booster warning s03ae1009 The brake system warning light illuminates when the electronic brake booster is malfunctioning. If the warning light illuminates, promptly park in a safe location as soon as possible and contact your SUBARU dealer. ! Electronic parking brake system warning s03ae1004 The brake system warning light illuminates when the electronic parking brake system is malfunctioning. If the warning light illuminates, promptly park in a safe location as soon as possible and contact your SUBARU dealer. The brake system warning light remains illuminated when the parking brake cannot be released even if the parking brake switch is pushed. For details, refer to “Electronic Parking Brake” P345. ! Frequent operation warning s03ae100403 The brake system warning light illuminates and a chirp sound will be heard if the parking brake switch is operated too frequently. In this case, the operation of the parking brake switch is restricted to protect the electronic parking brake system. & Electronic Parking Brake Indicator Light s03ae85 ! Parking brake indicator s03ae8501 The light illuminates with the parking brake applied while the ignition switch is in the “ACC” or “ON” position. It turns off when the parking brake is fully released. ! Electronic parking brake system warning s03ae8502 WARNING . When you release the electronic parking brake while the engine is running, the electronic parking brake indicator light will turn off. However, if the light still illuminates, stop the vehicle in a safe location immediately and have the system inspected by a SUBARU dealer. . If at all in doubt about whether the brakes are operating properly, do not drive the vehicle. Have your vehicle towed to the nearest SUBARU dealer for repair. . If the electronic parking brake indicator light flashes, the electronic parking brake system may be malfunctioning. Immediately stop your vehicle in a safe location, use tire stops under the tires to prevent the vehicle from moving and contact your SUBARU dealer. For details, refer to “Electronic Parking Brake” P345. NOTE . When the ignition switch is turned to the “LOCK”/“OFF” position with the electronic parking brake applied, the electronic parking brake indicator light remains illuminated for approximately 30 seconds and then turns off. 166 Warning and Indicator Lights . When the electronic parking brake switch is pulled to apply the electronic parking brake while the ignition switch is in the “LOCK”/“OFF” position, the electronic parking brake indicator light illuminates, remains illuminated for approximately 30 seconds and then turns off. . Even if the electronic parking brake indicator light flashes, if the warning light behavior is as described in the following examples, the electronic parking brake system is not malfunctioning. – The indicator light turns off when the electronic parking brake is released. . The electronic parking brake indicator light may flash immediately after the engine is started. However, it is not malfunctioning if the indicator light turns off after the electronic parking brake is released. . The electronic parking brake indicator light may flash after the electronic parking brake is frequently applied and released. However, the electronic parking brake system is not malfunctioning if the light turns off after a short period of time. The electronic parking brake indicator light flashes when the electronic parking brake system is malfunctioning. If the indicator light flashes, promptly park in a safe location as soon as possible and contact your SUBARU dealer. The electronic parking brake indicator light remains illuminated when the parking brake cannot be released even if the parking brake switch is pushed. For details, refer to “Electronic Parking Brake” P345. ! Parking brake apply inhibit warning s03ae850201 The electronic parking brake indicator light flashes for 10 seconds and a chirp sound will be heard if the parking brake switch is operated when the parking brake cannot be applied. ! Frequent operation warning s03ae850202 The electronic parking brake indicator light flashes for 10 seconds and a chirp sound will be heard if the parking brake switch is operated too frequently. In this case, the operation of the parking brake switch is restricted to protect the electronic parking brake system. NOTE Wait until the indicator light turns off. & Auto Vehicle Hold Indicator Light s03ae94 CAUTION If the Auto Vehicle Hold indicator light does not illuminate even when “Auto Vehicle Hold (AVH)” is touched to activate the Auto Vehicle Hold function, the electronic parking brake system may be malfunctioning. This indicator illuminates when the Auto Vehicle Hold is activated. This indicator blinks while the vehicle is stopped by the Auto Vehicle Hold function. For details, refer to “Auto Vehicle Hold function” P348. & Low Fuel Warning Light s03ae11 The low fuel warning light illuminates when the tank is nearly empty approximately 2.1 US gal (7.8 liters, 1.7 Imp gal). It only operates when the ignition switch is in the “ON” position. CAUTION Promptly put fuel in the tank whenever the low fuel warning light illuminates. Engine misfires as a – CONTINUED – Warning and Indicator Lights 167 3 Instruments and Controls result of an empty tank could cause damage to the engine. & Door Open Indicator Light s03ae61 When any of the doors or the rear gate is not fully closed, the door open indicator light appears. This function is effective even if the ignition switch is in the “LOCK”/ “OFF” or “ACC” position or the key is removed from the ignition switch (models without “keyless access with push-button start system”). The open door is indicated by the corresponding part of the door open indicator light. Always make sure this indicator does not appear before you start to drive. & Engine Hood Open Warning Light s03ae98 The warning light illuminates if the engine hood is not fully closed. This function is effective even if the ignition switch is in the “OFF” or “ACC” position. Always make sure this light is not illuminated before you start to drive. & Windshield Washer Fluid Warning Light s03ae42 This light appears when the fluid level in the windshield washer fluid tank decreases to the lower limit (approximately 0.6 US qt (0.6 liters, 0.5 Imp qt)). & All-Wheel Drive Warning Light s03ae13 WARNING Continued driving with the AWD warning light flashing can lead to powertrain damage. If the AWD warning light flashes, promptly park in a safe location and then check whether all four tires are the same diameter and whether any of the tires has a puncture or has lost air pressure for some other reason. NOTE If the temporary spare tire is used, the AWD warning light may flash. Use of the temporary spare tire should therefore be restricted to the minimum time necessary. Replace the temporary spare tire with a conventional tire as soon as possible. This light flashes if the vehicle is driven with tires of different diameters fitted on its wheels or with the air pressure excessively low in any of its tires. & Power Steering Warning Light s03ae53 While the engine is running, this warning light illuminates when a malfunction has been detected in the electric power steering system. CAUTION When the power steering warning light is illuminated, there may be more resistance when the steering wheel is operated. Drive carefully to the nearest SUBARU dealer and have the vehicle inspected immediately. NOTE If the steering wheel is operated in the following ways, the power steering control system may temporarily limit the power assist in order to prevent the system components, such as the control computer and drive motor, from overheating. 168 Warning and Indicator Lights . The steering wheel is operated frequently and turned sharply while the vehicle is maneuvered at extremely low speeds, such as while frequently turning the steering wheel during parallel parking. . The steering wheel remains in the fully turned position for a long period of time. At this time, there will be more resistance when steering. However, this is not a malfunction. Normal steering force will be restored after the steering wheel is not operated for a while and the power steering control system has an opportunity to cool down. However, if the power steering is operated in a non-standard way which causes power assist limitation to occur too frequently, that may result in a malfunction of the power steering control system. & Vehicle Dynamics Control Warning Light/Vehicle Dynamics Control Operation Indicator Light s03ae14 ! Vehicle Dynamics Control warning light s03ae1401 CAUTION The Vehicle Dynamics Control system provides its ABS control through the electrical circuit of the ABS. Accordingly, if the ABS is inoperative, the Vehicle Dynamics Control system becomes unable to provide ABS control. As a result, the Vehicle Dynamics Control system becomes inoperative, causing the warning light to illuminate. Although both the Vehicle Dynamics Control and ABS are inoperative in this case, the ordinary functions of the brake system are still available. You will be safe while driving in this condition, but drive carefully and have your vehicle checked at a SUBARU dealer as soon as possible. NOTE . If the electrical circuit of the Vehicle Dynamics Control system itself malfunctions, the warning light only illuminates. At this time, the ABS (Anti-lock Brake System) remains fully operational. . The warning light illuminates when the electronic control system of the ABS/Vehicle Dynamics Control system malfunctions. . The Vehicle Dynamics Control warning light, ABS warning light, and brake system warning light illuminate simultaneously if the EBD system malfunctions. For further details of the EBD system malfunction warning, refer to “Electronic Brake Force Distribution (EBD) system warning” P166. The Vehicle Dynamics Control system is probably inoperative under any of the following conditions. Have your vehicle checked at a SUBARU dealer immediately. . The warning light does not illuminate when the ignition switch is turned to the “ON” position. . The warning light illuminates while the vehicle is running. – CONTINUED – Warning and Indicator Lights 169 3 Instruments and Controls NOTE If the warning light behavior is as described in the following examples, the Vehicle Dynamics Control system may be considered normal. . The warning light illuminates right after the engine is started but turns off immediately and remains off. . The warning light illuminates after the engine has started and turns off while the vehicle is subsequently being driven. . The warning light illuminates during driving, but turns off immediately and remains off. ! Vehicle Dynamics Control operation indicator light s03ae1402 The indicator light flashes during activation of the skid suppression function and during activation of the traction control function. NOTE . The light may remain illuminated for a short period of time after the engine has been started, especially in cold weather. This does not indicate the existence of a problem. The light should turn off as soon as the engine has warmed up. . The indicator light illuminates when the engine has developed a problem and the CHECK ENGINE warning light/malfunction indicator light is on. The Vehicle Dynamics Control system is probably malfunctioning under the following condition. Have your vehicle checked at a SUBARU dealer as soon as possible. . The light does not turn off even after the lapse of several minutes (the engine has warmed up) after the engine has started. & Vehicle Dynamics Control OFF Indicator Light s03ae15 The light illuminates when “Vehicle Dynamics Control” is selected to deactivate the Vehicle Dynamics Control system. The Vehicle Dynamics Control system is probably malfunctioning under any of the following conditions. Have your vehicle checked at a SUBARU dealer immediately. . The light does not illuminate while the system check. . The light does not turn off even after a period of approximately 2 seconds after the ignition switch has been turned to the “ON” position. & Warning Chimes and Warning Indicator of the Keyless Access with Push-Button Start System (If Equipped) s03ae55 Access key warning indicator The keyless access with push-button start system is equipped with a warning chime and the access key warning indicator in order to minimize improper operations and help protect your vehicle from theft. When the warning chime sounds and/or the warning indicator appears, take the appropriate action. You cannot turn the warning chimes off. However, the volume setting of the outside warning chime can be changed by a SUBARU dealer. Consult your SUBARU 170 Warning and Indicator Lights dealer for details. WARNING Never drive the vehicle if the indicator on the push-button ignition switch is flashing in green when starting the engine. This indicates the status that the steering wheel is not released and could result in an accident involving serious injury or death. CAUTION . When starting the engine again after the operation indicator on the push-button ignition switch flashes in green, if the operation indicator is still flashing in green, there could be a steering lock malfunction. Contact your SUBARU dealer as soon as possible. . When the operation indicator on the push-button ignition switch flashes in orange, contact a SUBARU dealer immediately. NOTE . Even when the access key fob is within the operating ranges inside the vehicle, the access key warning for engine start may be provided depending on the status of the access key fob and the environmental conditions. . When the access key fob is taken out of the vehicle through an open window, the access key takeout warning or passenger access key takeout warning will not be provided. ! List of warnings s03ae5504 CAUTION When any of the following warnings occurs even if the access key warning indicator does not appear, take the appropriate action. – CONTINUED – Warning and Indicator Lights 171 3 Instruments and Controls Inside warning chime Outside warning chime Operation indicator on push-button ignition switch Status Action Ding, ding . (intermittent) — — The driver’s door is opened while the pushbutton ignition switch is “ACC” position and the select lever is in the “P” position. Switch the push-button ignition switch to “OFF”, or close the driver’s door. When exiting the vehicle, be sure to switch the push-button ignition switch to “OFF”. The push-button ignition switch is switched to “OFF” while the driver’s door is open. Close the driver’s door. Ding Short beep (2 seconds) — Lockout warning: The doors are locked by following methods when an access key fob is left in the car. . The door is closed when the lock lever of the door is in the lock position. . The door is closed when the power door locking switch is in the lock position. Take out the access key fob from the vehicle, and lock the doors. The doors cannot be locked while the access key fob is inside the vehicle. A chirp sound will be heard, and all doors will be unlocked. — Short beep (2 seconds) — Access key lock-in warning: The door lock sensor is touched while the push-button ignition switch is “OFF” and the access key fob is inside the vehicle. Take out the access key fob from the vehicle, and lock the doors. If the access key fob is inside the vehicle, the doors cannot be locked. — Beep, beep, beep, beep, beep (5 times) — Door ajar warning: The door lock sensor is touched while the ignition switch is in the “OFF” position and one of the doors including the rear gate is opened. Close the doors securely and lock them. If one of the doors including the rear gate is opened, the doors cannot be locked. Ding Long beep (60 seconds max.) — Power warning: The door lock sensor is touched while you are carrying the access key fob, the pushbutton ignition switch is in a position other than “OFF” and the select lever is in the “P” position. Return the access key fob inside the vehicle, or switch the push-button ignition switch to “OFF”. If the push-button ignition switch is not switched to “OFF”, the doors cannot be locked. Ding, ding . (7 seconds) — — Access key warning: The vehicle is driven while the access key fob is not inside the vehicle. Carry the access key fob, and drive the vehicle. 172 Warning and Indicator Lights Inside warning chime Outside warning chime Operation indicator on push-button ignition switch Status Action Ding — — Access key warning for engine start: The push-button ignition switch is pressed while the access key fob is not inside the vehicle. Carry the access key fob, and press the push-button ignition switch. Ding Beep, beep, beep (3 times) — Access key takeout warning: The driver exits the vehicle with the access key fob and closes the driver’s door while the push-button ignition switch is in a position other than “OFF” and the select lever is in a position other than the “P” position. Switch the push-button ignition switch to “OFF”, and get out of the vehicle. Ding Beep, beep, beep (3 times) — Passenger access key takeout warning: A fellow passenger exits the vehicle with the access key fob and closes a door other than the driver’s door while the push-button ignition switch is in a position other than “OFF”. Return the access key fob to inside the vehicle, or switch the push-button ignition switch to “OFF”. Long beep (continuous) Long beep (continuous) — Access key takeout without “P” position warning: The driver exits the vehicle with the access key fob and closes the driver’s door while the push-button ignition switch is in a position other than “OFF” and the select lever is in a position other than the “P” position. Shift the select lever to the “P” position, switch the push-button ignition switch to “OFF” and exit the vehicle. Long beep (continuous) — — Select lever position warning: . Case 1: The engine is turned off by pressing the push-button ignition switch while the select lever is in a position other than the “P” position. . Case 2: The driver’s door is opened while the push-button ignition switch is in a position other than “OFF” and the select lever is in a position other than the “P” position. . Case 1: Start the engine, shift the select lever to the “P” position, switch the pushbutton ignition switch to “OFF” and exit the vehicle. . Case 2: Shift the select lever to the “P” position, switch the push-button ignition switch to “OFF” and exit the vehicle. – CONTINUED – Warning and Indicator Lights 173 3 Instruments and Controls Inside warning chime Outside warning chime Operation indicator on push-button ignition switch Status Action Ding — — The battery of the access key fob is low. Replace the battery of the access key fob. Ding — Flashes in green (15 seconds max) Steering lock warning: The engine start procedure is performed, but the steering is still locked. While turning the steering wheel right and left lightly, depress the brake pedal and press the push-button ignition switch. Ding — Flashes in orange System malfunction warning: A malfunction is detected in the power system or steering lock. Contact a SUBARU dealer immediately and have the vehicle inspected. 174 Warning and Indicator Lights & Security Indicator Light s03ae16 This indicator light shows the status of the alarm system. It also indicates operation of the immobilizer system. ! Alarm system s03ae1601 It blinks to show the driver the operational status of the alarm system. For detailed information, refer to “Alarm System” P133. ! Immobilizer system s03ae1602 The security indicator light starts blinking in the following conditions. For models with “keyless access with push-button start system”: . Immediately after the push-button ignition switch is turned to the “OFF” position. . Immediately after the driver’s door is opened or closed when all of the following conditions are met. – The push-button ignition switch is in the “ON” or “ACC” position. – The engine is not running. In the event that an unauthorized key is used (for example, the key is unregistered or the ID code does not match), the power is not switched to “ON” and the security indicator light continues blinking. For models without “keyless access with push-button start system”: . Approximately 60 seconds after the ignition switch is turned from the “ON” position to the “ACC” or “LOCK” position. . Immediately after the key is pulled out. If the indicator light does not blink in the above conditions, it may indicate that immobilizer system may be malfunctioning. Contact your nearest SUBARU dealer immediately. In the event that an unauthorized key (for example, an unauthorized duplicate) is used, the security indicator light illuminates. For details about the immobilizer system, refer to “Immobilizer” P123. NOTE . The security indicator light remains off in the following conditions. It means that the matching of the ID code is completed and the immobilizer system is deactivated, and it does not indicate a malfunction. Models with “keyless access with push-button start system”: – While the engine is running – The push-button ignition switch has been turned to the “ON” or “ACC” position and the driver’s door has not been opened or closed Models without “keyless access with push-button start system”: – While the engine is running – For approximately 60 seconds after the ignition switch is turned from the “ON” position to the “ACC” or “LOCK” position – When the ignition switch is in the “ON” position . Even if a malfunction occurs, such as the security indicator light flashes irregularly, it will not affect the functionality of the immobilizer system. – CONTINUED – Warning and Indicator Lights 175 3 Instruments and Controls & SI-DRIVE Indicator s03ae52 SI-DRIVE indicator 1 Sport (S) mode 2 Intelligent (I) mode This light indicates the current SI-DRIVE mode. For details of SI-DRIVE mode, refer to “SI-DRIVE” P332. & Select Lever/Gear Position Indicator s03ae43 1 Upshift indicator 2 Downshift indicator 3 Select lever/gear position indicator The select lever position is displayed on the indicator. When the manual mode is selected, the gear position indicator, which shows the current gear selection, and the available up shift/downshift indicator light up. Refer to “Selection of Manual Mode” P330. & Turn Signal Indicator Lights s03ae20 These lights show the operation of the turn signal or lane change signal. If the indicator lights do not blink or blink rapidly, the turn signal bulb may be burned out. Replace the bulb as soon as possible. Refer to “Replacing Bulbs” P491. & High Beam Indicator Light s03ae21 This light shows that the headlights are in the high beam mode. This indicator light also illuminates when operating the headlight flasher. & High Beam Assist Indicator s03ae83 This indicator appears when the high beam assist function is activated. For details about the high beam assist function, refer to “High Beam Assist Function” P235. & Automatic Headlight Beam Leveler Warning Light s03ae33 This light illuminates when the automatic headlight beam leveler does not operate normally. If this light illuminates while driving, have your vehicle inspected at your SUBARU dealer. 176 Warning and Indicator Lights & LED Headlight Warning Light s03ae76 This light illuminates if the LED headlights malfunction. Have your vehicle inspected at a SUBARU dealer as soon as possible. & Steering Responsive Headlight OFF Indicator Light s03ae89 This light illuminates when the Steering Responsive Headlight function is off. For details about the on/off setting, refer to “Car settings” P203. & Steering Responsive Headlight Warning Light s03aeb2 The light illuminates when a malfunction occurs in the Steering Responsive Headlight. Refer to “Steering Responsive Headlight (SRH)” P238. & Headlight Indicator Light s03ae24 This indicator light illuminates under the following conditions. . The light switch is turned to the “ ” or “ ” position. . The light switch is in the “AUTO” position and the headlights illuminate automatically. & Front Fog Light Indicator Light (If Equipped) s03ae25 This indicator light illuminates while the front fog lights are illuminated. & Auto Start Stop Warning Light (Yellow) s03ae65 CAUTION If the Auto Start Stop warning light is illuminated in yellow, there may be a malfunction in the Auto Start Stop system. When starting the engine again after the Auto Start Stop warning light illuminates, if it is still illuminating, we recommend that you have your vehicle inspected at a SUBARU dealer as soon as possible. The Auto Start Stop warning light will illuminate in yellow if you open the engine hood when the engine has been temporarily stopped by the Auto Start Stop system. In this case, to ensure safety, the engine will not be automatically restarted, even if you release the brake pedal. Use normal operation to restart the engine. & Auto Start Stop OFF Indicator Light s03aeb3 This light will illuminate when “Auto Start Stop” is touched to prevent the Auto Start Stop system from operating. It will turn off when “Auto Start Stop” is touched once more to enable operation of the Auto Start Stop system. For details about the setting, refer to “Car settings” P203 (11.6-inch display models) or “Setting of the lower display” P218 (dual 7.0-inch display models). CAUTION If the Auto Start Stop OFF indicator light does not illuminate when “Auto Start Stop” is touched, we recommend that you contact a SUBARU dealer for an inspection as soon as possible. & Auto Start Stop Indicator Light (Green) s03ae66 This indicator light illuminates when the engine has been temporarily stopped by the Auto Start Stop system. It will turn off when the engine is restarted. – CONTINUED – Warning and Indicator Lights 177 3 Instruments and Controls & Auto Start Stop No Activity Detected Indicator Light s03aea3 When a vehicle is stopped, the indicator light illuminates when the operating condition of the Auto Start Stop system is not met. The light will turn off when the vehicle starts driving. Refer to “Non-operational conditions” P355. & X-MODE Indicator s03ae68 X-MODE indicator (models with 1 mode) 1 X-MODE indicator X-MODE indicator (models with 2 modes) 1 DEEP SNOW/MUD mode indicator 2 SNOW/DIRT mode indicator This indicator appears while X-MODE is activated. It will disappear when X-MODE is deactivated. Refer to “To Activate/ Deactivate X-MODE” P341. & Hill Descent Control Indicator Light s03ae69 This indicator appears while the hill descent control function is in standby. It will flash while the hill descent control function is operating. It will disappear when the hill descent control function is not available. & BSD/RCTA Warning Indicator (If Equipped) s03ae80 This warning indicator appears on the combination meter display (color LCD) when the BSD (Blind Spot Detection) or RCTA (Rear Cross Traffic Alert) is malfunctioning for any reason. For further details, refer to “BSD/RCTA Warning Indicator” P368. If this indicator remains displayed, have your vehicle inspected by your SUBARU dealer as soon as possible. & BSD/RCTA OFF Indicator (If Equipped) s03ae86 This indicator appears on the combination meter display (color LCD) when “Rear Vehicle Detection (BSD/RCTA)” is touched to deactivate the BSD (Blind Spot Detection) and RCTA (Rear Cross Traffic Alert), or when the BSD/RCTA is suspended temporarily. For details, refer to “BSD/ RCTA OFF Indicator” P368. & Icy Road Surface Warning Indicator s03ae82 When the outside temperature is 378F (38C) or less, the icy road surface warning indicator will illuminate to inform the driver that the road surface may be frozen. 178 Warning and Indicator Lights NOTE . The outside temperature indicator shows the temperature in the area around the sensor. However, the temperature may not be indicated correctly or the update may be delayed in the following conditions. – While parking or driving at low speeds – When the outside temperature changes suddenly (example: when going in and out of an underground parking area or when passing through a tunnel) – When starting the engine after being parked for a certain period of time . The icy road surface warning indicator should be treated only as a guide. Be sure to check the condition of the road surface before driving. . Once the icy road surface warning indicator appears, it will not disappear unless the outside temperature has increased to 418F (58C) or higher. & RAB Warning Indicator (If Equipped) s03ae91 This indicator illuminates if the Reverse Automatic Braking (RAB) system malfunctions. Refer to “Reverse Automatic Braking (RAB) System” P371. & RAB OFF Indicator (If Equipped) s03ae92 This indicator illuminates when the Reverse Automatic Braking (RAB) system is turned OFF, or when the Reverse Automatic Braking (RAB) system is suspended temporarily. Refer to “Reverse Automatic Braking (RAB) System” P371. & Sonar Audible Alarm OFF Indicator (If Equipped) s03ae93 This indicator illuminates when the Sonar Audible Alarm is turned OFF. For the setting procedure, refer to “Car settings” P203. & Driver Monitoring System Operation Indicator Light (Green) (If Equipped) s03aea4 This indicator illuminates when the Driver Monitoring System is activated. Refer to “Driver Monitoring System operation indicator light (green)” P390. & Driver Monitoring System Warning Light (Yellow) (If Equipped) s03aeb6 This warning light illuminates if the Driver Monitoring System malfunctions. We recommend that you have your vehicle inspected at a SUBARU dealer as soon as possible. Refer to “Driver Monitoring System warning light (yellow)” P390. & Driver Monitoring System OFF Indicator Light (If Equipped) s03aea5 This indicator illuminates when “Driver Monitoring System” is touched to deactivate the Driver Monitoring System. Refer to “Driver Monitoring System OFF indicator light” P390. – CONTINUED – Warning and Indicator Lights 179 3 Instruments and Controls & Driver Monitoring System Temporary Stop Indicator Light (If Equipped) s03aea6 This indicator illuminates when the Driver Monitoring System is temporarily stopped. Refer to “Driver Monitoring System temporary stop indicator light” P390. NOTE The Driver Monitoring System stops temporarily in the following circumstances. . The temperature of the Driver Monitoring System unit is high. 3-7. Combination Meter Display (Color LCD) s03bn WARNING Always pay adequate attention to safe driving when operating the combination meter display (color LCD) while the vehicle is in motion. When operation of the combination meter display (color LCD) interferes with your ability to concentrate on driving, stop the vehicle before performing operations on the screen. Also, do not concentrate on the display while driving. Doing so may cause you to look away from the road and could result in an accident. Various information will be shown on the combination meter display (color LCD). Also, a warning message will appear on the display if a malfunction is detected. In addition, several settings for the displayed content can be performed. Combination meter display (color LCD) 1 Meter information screen (Refer to “Meter Information Screen” P182.) 2 Warning screen (Refer to “Warning Screen” P182.)/Basic screen (Refer to “Basic Screens” P185.) 3 EyeSight screen* 180 Combination Meter Display (Color LCD) 4 Digital speed screen (Refer to “Digital Speed Screen” P188.) 5 Telltale screen (Refer to “Telltale Screen” P184.) 6 Select lever/gear position indicator (Refer to “Select Lever/Gear Position Indicator” P176.) 7 X-MODE indicator (Refer to “X-MODE Indicator” P178.)/SI-DRIVE indicator (Refer to “SI-DRIVE Indicator” P176.) 8 Odometer (Refer to “Odometer” P153.)/Double trip meter (Refer to “Double Trip Meter” P153.) A: Activating the EyeSight system B: Deactivating the EyeSight system *: For details, refer to the separate EyeSight Owner’s Manual. & Basic Operation s03bn01 Control switches 123 By operating or of the control switches, the screens can be changed. If there are some useful messages, such as vehicle information, warning information, etc., they will interrupt the current screen, and appear on the display accompanied by a beep. If such a screen is displayed, take proper action according to the message shown on the screen. The warning screen will return to the original screen after a few seconds. While the information reminder is shown on the display, it may be possible to display the warning screen again. To recall the message marked with on the display, press the switch on the steering wheel. & Welcome Screen (Opening Animation) and Good-Bye (Ending Animation) Screen s03bn08 Welcome screen and Good-bye screen are motion graphic displayed on the combination meter display and center information display upon entering and exiting the vehicle. When the driver’s door is opened and closed after unlocking the door, the welcome screen (opening animation) will appear on the combination meter display (color LCD) for approximately 20 seconds. When the ignition switch is turned to the “LOCK”/“OFF” position, the combination meter display (color LCD) gradually turns off by showing good-bye screen (ending animation). NOTE . The welcome screen and the goodbye screen may differ in the actual words and appearance. . The basic screen will be shown when the ignition switch is turned to the “ON” position while the welcome screen is displayed. – CONTINUED – Combination Meter Display (Color LCD) 181 3 Instruments and Controls . Once the welcome screen appears, it takes a certain period of time to display it again. . If the ignition switch is operated after unlocking the driver’s door, the welcome screen will not appear even when the driver’s door is opened and closed. . The welcome screen will disappear when you lock the driver’s door by using the remote keyless entry system (all models) or the keyless access function (if equipped) while the welcome screen is displayed. . The welcome screen including the audio/navigation unit can be set to on or off. . The welcome screen can be set to on or off. For details, refer to “General settings” P198 (11.6-inch display models) or “General settings” P215 (dual 7.0-inch display models). . The good-bye screen can be set to on or off. For details, refer to “General settings” P198 (11.6-inch display models) or “General settings” P215 (dual 7.0-inch display models). & Warning Screen s03bn05 Example of warning If there is a warning message or a maintenance notification, it will appear on combination meter display (color LCD). Take the appropriate actions based on the messages indicated. & Meter Information Screen s03bn12 The meter information screen can be changed. For details, refer to “General settings” P198 (11.6-inch display models) or “General settings” P215 (dual 7.0-inch display models). ! ECO gauge s03bn1201 The ECO gauge shows the difference between the average rate of fuel consumption since the trip meter was last reset and the current rate of fuel consumption. The ECO gauge indicates the current fuel efficiency as shown in the following chart. Displayed unit Needle position “+” side “−” side MPG Better Poorer l/100km Poorer Better NOTE . The ECO gauge shows only an approximate indication. 182 Combination Meter Display (Color LCD) . After resetting the trip meter, the average rate of fuel consumption is not shown until driving 0.6 miles (1 km). Until that time, the ECO gauge does not operate. ! Clock and temperature s03bn1202 This screen displays the clock and outside temperature. NOTE . The clock can be displayed in either 12-hour display or 24-hour display. For details, refer to “Clock” P227. . The outside temperature indicator shows the temperature in the area around the sensor. However, the temperature may not be indicated correctly or the update may be delayed in the following conditions. – While parking or driving at low speeds – When the outside temperature changes suddenly (example: when going in and out of an underground parking area or when passing through a tunnel) – When starting the engine after being parked for a certain period of time . You can set the temperature units to be displayed in Celsius (8C) or Fahrenheit (8F). For details, refer to “Car settings” P203 (11.6-inch display models) or “Vehicle setting icons” P221 (dual 7.0-inch display models). ! Compass (if equipped) s03bn1203 The direction of the vehicle is displayed. ! Driving range on remaining fuel s03bn1204 – CONTINUED – Combination Meter Display (Color LCD) 183 3 Instruments and Controls NOTE The driving range on the remaining fuel is only a guide. The indicated value may differ from the actual driving range on the remaining fuel, so you must immediately fill the tank when the low fuel warning light illuminates. & Telltale Screen s03bn09 1 Telltale screen When the corresponding situation occurs, the following telltales will be displayed on the telltale screen. NOTE . When there is warning information to display, it will be displayed in five warning indicators, starting on the left in ascending order of severity. . If there are 6 or more warning messages to display, the indicators will be displayed in sequential order. Mark Name Page Door open indicator light 168 Engine hood open warning light 168 LED headlight warning light 177 High beam assist indicator 176 Steering Responsive Headlight OFF indicator light 177 Steering Responsive Headlight warning light 177 Engine low oil level warning light 162 AT OIL TEMP warning light 162 All-Wheel Drive warning light 168 RAB warning indicator (if equipped) 179 Mark Name Page RAB OFF indicator (if equipped) 179 BSD/RCTA warning indicator (if equipped) 178 BSD/RCTA OFF indicator (if equipped) 178 Hill descent control indicator light 178 Auto Start Stop warning light (yellow) 177 Auto Start Stop indicator light (green) 177 Auto Start Stop OFF indicator light 177 Auto Start Stop No Activity Detected indicator light 178 Automatic headlight beam leveler warning light 176 Windshield washer fluid warning light 168 184 Combination Meter Display (Color LCD) Mark Name Page Driver Monitoring System operation indicator light (green) (if equipped) 179 Driver Monitoring System warning light (yellow) (if equipped) 179 Driver Monitoring System OFF indicator light (if equipped) 179 Driver Monitoring System temporary stop indicator light (if equipped) 180 Icy road surface warning light 178 & Basic Screens s03bn06 By operating the or switch on the steering wheel, you can change the screen that is always displayed. Average fuel consumption screen: AVG: Average fuel consumption : Driving range on remaining fuel This screen displays the average rate of fuel consumption since the trip meter was last reset. NOTE The driving range on the remaining fuel is only a guide. The indicated value may differ from the actual driving range on the remaining fuel, so you must immediately fill the tank when the low fuel warning light illuminates. Current fuel consumption screen: : Current fuel consumption : Driving range on remaining fuel NOTE The driving range on the remaining fuel is only a guide. The indicated value may differ from the actual driving range on the remaining fuel, so you must immediately fill the tank when the low fuel warning light illuminates. – CONTINUED – Combination Meter Display (Color LCD) 185 3 Instruments and Controls Driving information screen: : Journey time : Journey distance This screen displays the journey time (the time that has elapsed since the ignition switch was turned to the “ON” position) and journey distance (the distance that has been driven since the ignition switch was turned to the “ON” position). Auto Start Stop screen: : The total amount of time that the engine was stopped by means of the Auto Start Stop system : The total amount of fuel saved due to the engine being stopped by the Auto Start Stop system The indicated values are calculated from the most recent reset of the currently displayed trip meter to the current time. The indication ranges are as follows. . Total amount of time: from 00’00@ to 9999h59’59@ . Total amount of fuel saved: from 0 gal to 9999.999 gal NOTE . When the trip meter is reset, the corresponding accumulated time and the amount of fuel saving are also reset. . The time spent with the engine stopped by means of the Auto Start Stop system is also added to the journey time. TPMS screen (U.S.-spec. models): This screen displays each tire pressure. When a tire is deflated, the deflated tire and the tire pressure will be displayed on the screen in yellow. NOTE . The tire pressure values are displayed several minutes after driving. . You can set the tire pressure units. For details about setting the units, refer to “General settings” P198 (11.6-inch display models) or “Gen- 186 Combination Meter Display (Color LCD) eral settings” P215 (dual 7.0-inch display models). . Once the tire pressure monitoring system detects the low tire pressure, the tire pressure values will display in yellow until the system detects the normal tire pressure. . Immediately adjust the tire pressure when the warning light illuminates. When the tire pressure monitoring system detects the adjusted tire pressure, the warning light will turn off and the tire pressure values will turn to white. . For information about the specified value of the air pressure, refer to “Tires” P507. Compass screen (if equipped): The direction of the vehicle is displayed. Navigation screen (if equipped): When the route guidance is set in the navigation system, this item shows the navigation route information. For details about the navigation system, refer to the separate navigation/audio Owner’s Manual. Audio screen: The audio screen shows the status of audio information. For details about the audio system, refer to the separate navigation/ audio Owner’s Manual. – CONTINUED – Combination Meter Display (Color LCD) 187 3 Instruments and Controls Clock and outside temperature screen: This screen displays the clock and outside temperature. For details about clock setting, refer to “Clock” P227. NOTE The outside temperature indicator shows the temperature in the area around the sensor. However, the temperature may not be indicated correctly or the update may be delayed in the following conditions. – While parking or driving at low speeds – When the outside temperature changes suddenly (example: when going in and out of an underground parking area or when passing through a tunnel) – When starting the engine after being parked for a certain period of time & Digital Speed Screen s03bn11 1 Speed limit indicator (if equipped) 2 Vehicle speed This screen displays the current vehicle speed. 3-8. Center Information Display (CID) s03bs WARNING Always pay attention to safe driving when operating the center information display while the vehicle is in motion. When operation of the center information display is disturbing your awareness and ability to concentrate on driving, stop the vehicle in a safe place before performing operations on the display. Also, do not concentrate on the display while driving. Doing so could result in an accident. & Features s03bs01 All information is displayed on the center information display, including vehicle settings, vehicle status, navigation system (if equipped) operation, audio operation, and climate control operation. 188 Center Information Display (CID) Items Page for 11.6-inch display models Page for dual 7.0- inch display models Interruption screen 190 Vehicle status and maintenance information 191 221 Vehicle settings 197 215/218 Climate control operations 197 214 Rear view camera 358 Navigation system Refer to the navigation/ audio Owner’s Manual. Audio/telephone Refer to the navigation/ audio Owner’s Manual. EyeSight Refer to the Owner’s Manual supplement for the EyeSight system. The center information display can also be used to set and initialize the center information display itself. NOTE . When the vehicle is in motion, certain functions and selections may not be available. . The language and units for both the center information display and the combination meter display (color LCD) can be changed. For details, refer to “General settings” P198 (11.6-inch display models) or “General settings” P215 (dual 7.0-inch display models). For details about unit settings, refer to “Car settings” P203 (11.6-inch display models) or “Vehicle setting icons” P221 (dual 7.0-inch display models). . The images displayed in this Owner’s Manual are sample images. The actual image may vary depending on the region and vehicle specifications. & Welcome Screen s03bs02 Welcome screen and Good-bye screen are motion graphic displayed on the combination meter display and center information display upon entering and exiting the vehicle. When the driver’s door is opened and closed, the welcome screen will appear for a short time. NOTE . The welcome screen will disappear when the ignition switch is turned to the “ON” position while the welcome screen is shown. . The welcome screen can be turned on or off. For details, refer to “General settings” P198 (11.6-inch display models) or “General settings” P215 (dual 7.0-inch display models). . For a certain period of time after the welcome screen has once appeared, it may not appear again even when the driver’s door is opened and closed. This does not indicate a malfunction. & Good-Bye Screen s03bs08 The good-bye screen will be displayed under the following conditions. . The driver’s door is opened after the ignition switch is put in the “OFF” position. . 3 minutes have passed after the ignition switch is put in the “OFF” position with the driver’s door closed. . 10 minutes have passed when the hands-free phone is used after the ignition switch is put in the “OFF” position. . The battery voltage is low when the ignition switch is put in the “OFF” position. – CONTINUED – Center Information Display (CID) 189 3 Instruments and Controls & Interruption Screen s03bs03 Useful messages, such as reminders, weather information (if equipped) and traffic information (if equipped) may interrupt the current screen and appear on the display accompanied by a beep. Take the proper action according to the message. & Touch Screen Operations s03bs04 The center information display has a touch screen. Operations are performed by touching the touch screen directly. ! Touch s03bs0401 Quickly touch and release once. ! Drag s03bs0402 Touch the screen and move the screen to the desired position. ! Swipe s03bs0403 Quickly move the screen by swiping with your finger. NOTE Swipe operations may not be performed smoothly in high altitudes. & 11.6-Inch Display Models s03bs05 NOTE For dual 7.0-inch display models, refer to “Dual 7.0-Inch Display Models” P213. 190 Center Information Display (CID) ! Touch screen s03bs0501 1 HOME icon (Refer to “HOME icon” P197.) 2 Status bar (Refer to “Status bar” P191.) 3 Information bar (Refer to “Information bar” P192.) 4 Main screen (Refer to “Main screen” P197.) 5 Manage device icon (Refer to the separate navigation/audio Owner’s Manual) 6 Driver profiles icon (Refer to “Driver profiles icon” P197.) 7 Climate control screen (Refer to “Climate control screen” P197.) 8 Auto Start Stop ON/OFF icon (Refer to “Auto Start Stop ON/OFF icon” P194.) 9 Car settings icon (Refer to “Car settings icon” P195.) While the ignition switch is in the “ACC” or “ON” position, the touch panel will activate. ! Status bar s03bs050101 The outside temperature and clock are displayed on the status bar. NOTE . The outside temperature indicator shows the temperature around the sensor. However, the temperature may not be indicated correctly or the update may be delayed in the following conditions. – While parking or driving at low speeds – When the outside temperature changes suddenly (example: when going in and out of an underground parking area or when passing through a tunnel) – When starting the engine after being parked for a certain period of time . You can set the temperature to be displayed in Celsius or Fahrenheit. For details, refer to “Car settings” P203 (11.6-inch display models) or “Vehicle setting icons” P221 (dual 7.0-inch display models). . The clock can be displayed in either 12-hour display or 24-hour display. For details, refer to “Clock” P227. . Touch the clock on the status bar to display the clock setting screen. Refer to “Clock” P227. . For details about Bluetooth device information, refer to the navigation/ audio Owner’s Manual. – CONTINUED – Center Information Display (CID) 191 3 Instruments and Controls ! Information bar s03bs050102 Swipe the information bar or touch or on the information bar to switch the item displayed. Audio screen: The screen of the currently selected audio source is displayed. For details about how to use the audio set, refer to the separate navigation/audio Owner’s Manual. Navigation screen (models with navigation system): The directions to the destination are displayed on the screen. NOTE When a destination is not set in the navigation system, the compass orientation, street name and speed limit remain displayed on the screen. Favorite screen: Favorite screen This screen displays up to three optional pieces of information that can be selected from the following items. 192 Center Information Display (CID) Item Details Engine coolant temperature Engine oil temperature Average vehicle speed Accelerator opening ratio Vehicle posture Direction of the vehicle*1 Weather information for the next three hours*2 Weather information for the next six hours*2 Posted speed limit of the road you are currently driving on*1 Calendar Driver Monitoring System*1 information and the average fuel consumption of driver Item Details Nothing is displayed. *1: If equipped *2: Models with SiriusXM Satellite Radio NOTE Some items may not be shown depending on the model and specifications. The items shown on the favorite screen can be changed. For details, refer to “Favorite Widgets” P208. Weather information screen (if equipped): NOTE . When all of the following conditions are satisfied, weather information is displayed. – The vehicle is equipped with an audio and navigation system for SiriusXM satellite radio. – The SiriusXM satellite radio subscription is active. . The weather forecast for the set destination remains displayed until a new destination is set or until the destination is reached. . Depending on the reception timing of XM, the weather information may be delayed. – CONTINUED – Center Information Display (CID) 193 3 Instruments and Controls X-MODE screen: Models with 1 mode Models with 2 modes X-MODE information is displayed on the screen. Also, X-MODE can be switched to a different mode on the screen. ! Main screen s03bs050103 For details about the following menu, refer to the separate navigation/audio Owner’s Manual. . Radio . Media . Phone . Map . Apps . My Subaru . SUBARU STARLINK . Add to Shortcut ! Auto Start Stop ON/OFF icon s03bs050108 1 Auto Start Stop indicator (green) Touching “ ” deactivates the Auto Start Stop system and turns off the Auto Start Stop indicator (green) on the screen. Touching “ ” again activates the Auto Start Stop system and turns on the Auto Start Stop indicator (green). Refer to “To turn on/off the Auto Start Stop system” P356. ! Auto Vehicle Hold icon s03bs050109 To turn the Auto Vehicle Hold function on and off, touch the “Auto Vehicle Hold” icon. When the Auto Vehicle Hold function is turned off, the Auto Vehicle Hold indicator light will turn off. Refer to “To turn on/off the Auto Vehicle Hold function” P349. 194 Center Information Display (CID) ! Vehicle Dynamics Control icon s03bs050110 To turn the Vehicle Dynamics Control on and off, touch the “Vehicle Dynamics Control” icon. When the Vehicle Dynamics Control system is turned off during engine operation, the Vehicle Dynamics Control OFF indicator light on the combination meter illuminates. The Vehicle Dynamics Control system will be deactivated. When “Vehicle Dynamics Control” icon has been touched again to reactivate the Vehicle Dynamics Control system, the Vehicle Dynamics Control OFF indicator light turns off. Refer to “To Turn On/Off the Vehicle Dynamics Control System” P339. ! Display Off s03bs050112 Activation of the display off mode: 1. Touch “Display Off”. Deactivation of the display off mode: 1. Touch the display or push the temperature control button. 2. Press and hold the volume knob to turn the screen back on. ! Car settings icon s03bs050104 Touch to display the items that are changeable while driving. – CONTINUED – Center Information Display (CID) 195 3 Instruments and Controls Item Available settings Page reference for the vehicle system operation Page reference for 1st menu 2nd menu the setting procedure Vehicle Control Vehicle Dynamics Control ON/OFF 339 207 X-MODE Models with 1 mode: ON/OFF Models with 2 modes: Deep Snow/Mud, Normal, Snow/ Dirt 341 207 Cruise Control Acceleration Eco/Comfort/Standard/Dynamic *2 — Steering Responsive Headlights (SRH) ON/OFF 238 207 Auto Vehicle Hold (AVH) ON/OFF 348 207 Auto Start Stop ON/OFF 356 207 Driving Assistance Pre-Collision Braking Setting ON/Setting OFF *2 — Forward Collision Warning Far/Normal/Near Lane Departure All Functions/Lane Departure Prevention Function Only/Warning Buzzer Only/OFF Rear Vehicle Detection (BSD/RCTA)*1 ON/OFF 368 207 Driver Monitoring System*1 ON/OFF 382 207 More Settings Warning Volume Min/Mid/Max 367, 380 and *2 — Units km, km/h, Liter/ Miles, MPH, Gallon 152 and 180 207 *1: If equipped *2: For details about the EyeSight system, refer to the Owner’s Manual supplement for the EyeSight system. 196 Center Information Display (CID) ! Driver profiles icon s03bs050105 Touch (driver profiles icon) to confirm the driver’s information. For details, refer to the separate navigation/audio Owner’s Manual. ! Manage devices icon s03bs050113 Touch the manage devices icon to pair your vehicle’ system with a device that uses Android Auto, Apple CarPlay, or a similar application. For details, refer to the separate navigation/audio Owner’s Manual. ! HOME icon s03bs050106 Touch (HOME) to display the top menu. ! Climate control screen s03bs050107 The climate control status is shown on the screen. 1 Climate control ON/OFF icon 2 Set temperature indicator (driver’s side) 3 SYNC mode indicator 4 Airflow mode 5 Climate control mode 6 Air inlet selection 7 Dynamic ventilation mode indicator 8 Set temperature indicator (passenger’s side) 9 Dynamic ventilation ON/OFF icon 10 Customizable icon 11 Fan speed control When operating the climate control system, the main screen switches to the climate control screen. For details, refer to “Climate Control Panel” P262. ! Main screen s03bs0502 To display the main screen, touch (HOME). In this Owner’s Manual, the following settings will be explained. For details about other items, refer to the separate navigation/audio Owner’s Manual. – “Settings” ? “General” – “Settings” ? “Car” – “Car Info” – CONTINUED – Center Information Display (CID) 197 3 Instruments and Controls ! General settings s03bs050201 Set the time and display general items. 1. Touch (HOME). 2. ? (Settings) 3. ? “General” 4. Select the preferred menu. 198 Center Information Display (CID) The setting adjustments to the following items can be manually changed to meet your personal requirements. Item Available settings Page reference for the vehicle system operation Page reference for the setting proce- 1st menu 2nd menu 3rd menu dure General Clock Time Setting*1*2 AUTO/Manual 227 227 Time Setting*3 Sync With Phone/Manual Time Zone*1 AUTO/Pacific/Mountain/Central/ Eastern/Atlantic/Newfoundland/ Hawaii/Alaska 207 Daylight Saving Time*1 AUTO/ON (+1 hour)/OFF 207 Clock Format 12H/24H 207 Display Display Off Turn the screen off. — 207 Brightness Dial ON/OFF 155 207 Brightness/Contrast Set and adjust the brightness and contrast of the display. 207 207 Wi-Fi Settings Wi-Fi ON/OFF *6 — Connected to: Select the registered devise. Available Wi-Fi Networks Add Wi-Fi Protected Setup PIN Setup/Push Button Setup Registered Wi-Fi Networks — Wi-Fi Security Information Wi-Fi Security Information (AP mode) — – CONTINUED – Center Information Display (CID) 199 3 Instruments and Controls Item Available settings Page reference for the vehicle system operation Page reference for the setting proce- 1st menu 2nd menu 3rd menu dure General Wi-Fi Hotspot Wi-Fi Hotspot ON/OFF *7 — Wi-Fi name (SSID): — Security Type: — Password: — Broadcast Frequency: — SSID Broadcast ON/OFF Connected Devices: — Reminder Screen Maintenance ON/OFF 190 207 Birthday ON/OFF 207 Anniversary ON/OFF 207 Valet Mode Passcode Setting*8 Keyboard: Enter New Passcode Activate Valet Mode Keyboard: Enter Your Passcode 230 207 Change Passcode Keyboard: Change Passcode Meter Screen Gauge Initial Movement ON/OFF 152 207 Meter Information Screen Eco Gauge/OUT TEMP/Clock/ Compass*4/Gas Range 182 207 Turn by Turn Screen Interruption* 1 ON/OFF 185 207 Camera Rear Camera Delay Control ON/OFF 359 207 Steering Angle Lines ON/OFF 360 207 200 Center Information Display (CID) Item Available settings Page reference for the vehicle system operation Page reference for the setting proce- 1st menu 2nd menu 3rd menu dure General Climate Control Customize Climate Button A/C/MAX A/C/AUTO/Recirculation/ SYNC 269 207 Temperature Unit 8F/8C — 191 207 Language — English/Français/Español 180 and 188 207 Tire Pressure Units*5 — kPa/PSi 185 207 Home Screen Shortcuts — ON/OFF *6 207 Welcome Screen — ON/OFF 181 207 Goodbye Screen — ON/OFF 181 207 Favorite Widgets — Set a favorite widget from the list. 192 208 Birthday List — Set a birthday. 190 208 Anniversary List — Set an anniversary day. 190 209 Periodic Rest Notification* 1 — ON/OFF *6 — Software Update Update Check if a new software update Automatically Check for Updates ON/OFF Automatically Download Updates ON/OFF Default — SUBARU STARLINK Apps Recovery — OK/Cancel SUBARU STARLINK Auto Connect — ON/OFF – CONTINUED – Center Information Display (CID) 201 3 Instruments and Controls Item Available settings Page reference for the vehicle system operation Page reference for the setting proce- 1st menu 2nd menu 3rd menu dure General Factory Data Reset — Reset/Cancel System Information — — *6 — Free/Open Source Software Information — — *1: Models with navigation system *2: Models with SUBARU STARLINK without navigation system *3: Models without SUBARU STARLINK or navigation system *4: Models without navigation system *5: If equipped *6: For details about the audio and navigation system, refer to the Owner’s Manual supplement for the audio and navigation system. *7: For details, refer to the Owner’s Manual supplement for SUBARU STARLINK Safety and Security. *8: Displayed until valet mode is set. NOTE Touch to display the explanation of the items. 202 Center Information Display (CID) ! Car settings s03bs050209 Perform the EyeSight system setting and vehicle setting. 1. Touch (HOME). 2. ? (Settings) 3. ? “Car” 4. Select the preferred menu. – CONTINUED – Center Information Display (CID) 203 3 Instruments and Controls The setting adjustments to the following items can be manually changed to meet your personal requirements. Item Available settings Page reference for the vehicle system operation Page reference for the setting 1st menu 2nd menu 3rd menu procedure Car EyeSight Pre-Collision Braking Setting ON/Setting OFF *3 — Forward Collision Warning Far/Normal/Near Lane Departure All Functions/Lane Departure Prevention Function Only/ Warning Buzzer Only/OFF Cruise Control Acceleration Eco/Comfort/Standard/Dynamic Lead Vehicle Acquisition Sound ON/OFF Lead Vehicle Moving Monitor ON/OFF Select Drive on Left/Drive on Right Right Lane/Left Lane Reverse Automatic Braking*1 Sonar Audible Alarm ON/OFF 371 207 Driver Monitoring System*1 Driver Monitoring System ON/OFF 382 207 Repeat Facial Scan Perform the user recognition. 209 User Recognition ON/OFF 207 Register User Register the user. 209 Delete User Delete the registered user. 209 Delete All Users Delete all registered users. 209 204 Center Information Display (CID) Item Available settings Page reference for the vehicle system operation Page reference for the setting 1st menu 2nd menu 3rd menu procedure Car Keyless Entry System Audible Signal*1*2 ON/OFF 121 and 126 207 Hazard Warning Flasher ON/OFF 121 and 127 207 Driver Door Unlock*1 Driver Door Only/All 115 207 Rear Gate/Trunk Unlock*1 Rear Gate/Trunk Only/All 115 207 Defogger — 15 minutes/Continuous 246 207 Interior Light — 10 seconds/20 seconds/30 seconds/OFF 283 207 Auto Light Sensor Light Sensitivity Min/Low/Mid/Max 232 207 Wiper Link ON/OFF 233 207 Welcome Lighting Approaching Time Set 30 seconds/60 seconds/90 seconds/OFF 233 207 Leaving Time Set 30 seconds/60 seconds/90 seconds/OFF 207 One-Touch Lane Changer — ON/OFF 241 207 Auto Door Lock/Unlock Auto Door Lock Vehicle Speed/Shift into or out of PARK/OFF 131 207 Auto Door Unlock Ignition OFF/Driver Door Open/ Shift into or out of PARK/OFF 207 – CONTINUED – Center Information Display (CID) 205 3 Instruments and Controls Item Available settings Page reference for the vehicle system operation Page reference for the setting 1st menu 2nd menu 3rd menu procedure Car Rear Seat Reminder — ON/OFF 56 207 Vehicle Dynamics Control — ON/OFF 339 207 Auto Vehicle Hold (AVH) — ON/OFF 348 207 Auto Start Stop — ON/OFF 356 207 Rear Vehicle Detection (BSD/ RCTA)*1 — ON/OFF 368 207 X-MODE — Models with 1 mode: ON/OFF Models with 2 modes: Deep Snow/Mud, Normal, Snow/Dirt 341 207 Steering Responsive Headlights (SRH) — ON/OFF 238 207 Warning Volume — Min/Mid/Max 367, 380 and *3 207 Units — km, km/h, Liter/ Miles, MPH, Gallon 152 and 180 207 *1: If equipped *2: This setting also works as the On/Off setting of the power rear gate buzzer for starting operation. However, you cannot change the warning buzzer setting for a detecting jam, etc. *3: For details about EyeSight system, refer to the Owner’s Manual supplement for the EyeSight system. NOTE Touch to display the explanation of the items. 206 Center Information Display (CID) ! How to select items on the screen s03bs0510 ! ON/OFF setting s03bs051001 Example Touch the changing menu and select ON or OFF . ! Selecting s03bs051002 Example Touch the preferred item. ! How to set items on the screen s03bs0511 ! Brightness/Contrast s03bs051101 Set and adjust the brightness and contrast of the center information display. NOTE “Brightness” can only be adjusted when “Brightness Dial” is off. Refer to “General settings” P198. 1. Touch (HOME). 2. ? (Settings) 3. ? “General” 4. ? “Display” 5. ? “Brightness/Contrast” 6. Drag to adjust the brightness and contrast. – CONTINUED – Center Information Display (CID) 207 3 Instruments and Controls Touch “Default” to revert to the factory setting. ! Favorite Widgets s03bs051102 The menu on the favorite screen can be customized. 1. Touch (HOME). 2. ? (Settings) 3. ? “General” 4. ? “Favorite Widgets” 5. Select the icon of the display position. 6. Select the display item. ! Birthday List s03bs051103 If a birthday or anniversary is approaching, a message will be shown when the ignition switch is turned to the “ON” position. This function can be set to on or off by “Reminder Screen”. For details, refer to “General settings” P198. 1. Touch (HOME). 2. ? (Settings) 3. ? “General” 4. ? “Birthday List” 5. ? “Add” 6. Enter the name. 7. ? “Next” 8. Enter the date. 9. ? “OK” 208 Center Information Display (CID) NOTE A maximum of 5 birthdays can be stored. ! Anniversary List s03bs051104 The procedure for setting an anniversary is the same as “Birthday List” P208, except that in step 4 “Anniversary List” is selected. ! Driver Monitoring System (if equipped) s03bs051105 The Driver Monitoring System settings can be changed. For setting method for the following menu on the Driver Monitoring System, refer to “ON/OFF setting” P207. . Driver Monitoring System . User Recognition Repeat Facial Scan: 1. Touch (HOME). 2. ? (Settings) 3. ? “Car” 4. ? “Driver Monitoring System” 5. ? “Repeat Facial Scan” 6. ? “OK” 7. While seated in the driver’s seat, face forward and wait for a few moments. When the scan is completed, the completion screen is displayed on the combination meter (color LCD). Register User: 1. Touch (HOME). 2. ? (Settings) 3. ? “Car” 4. ? “Driver Monitoring System” 5. ? “Register User” 6. Select the preferred user from the list. 7. ? “Set” 8. While seated in the driver’s seat, face forward and wait for a few moments. – CONTINUED – Center Information Display (CID) 209 3 Instruments and Controls When the screen changes, the registration of the facial scan is completed. A Forward direction B Display direction 1 Face forward. 2 Do not lower your chin. 3 Face the display. *: Display NOTE . If user registration cannot be performed, turn your face forward as shown in the illustration, then turn to the display. . There are some cases where user registration cannot be registered properly. In those cases, refer to “Driver Monitoring System” P382. . If “Unable to register. Try again.” appears, repeat the procedure beginning from step 5. 9. Enter the name. 10.? “Next” 210 Center Information Display (CID) 11. Select the preferred icon. 12.? “Set” NOTE . An existing user can be overwritten by selecting a registered number. When a user is registered by overwriting, the individual fuel economy data is reset. . When “User Recognition” is set to OFF, user registration cannot be selected. Delete User: 1. Touch (HOME). 2. ? (Settings) 3. ? “Car” 4. ? “Driver Monitoring System” 5. ? “Delete User” 6. Select the preferred user from the list. 7. ? “Yes” – CONTINUED – Center Information Display (CID) 211 3 Instruments and Controls Delete All Users: 1. Touch (HOME). 2. ? (Settings) 3. ? “Car” 4. ? “Driver Monitoring System” 5. ? “Delete All Users” 6. ? “Yes” ! Car information screen s03bs0503 1. Touch (HOME) to display the top menu. 2. ? (Car Info) ! Driving Statistics screen s03bs050301 1 Driving Statistics 2 Steering angle 3 Running condition 4 Vehicle posture 5 Telltale screen This screen displays the driving status of the vehicle and the operation status functions. For functions that are operating, the indicator will illuminate or flash. NOTE . The vehicle posture indication may differ from the actual vehicle posture. . The vehicle posture angle varies not only due to the angle of the road surface, but also due to the vehicle tilt caused by the occupants, cargo, 212 Center Information Display (CID) and acceleration or deceleration. ! Maintenance screen s03bs050303 Maintenance reminders can be set. Engine Oil change reminder: 1. Touch “Maintenance” from the 2nd menu in the car info screen. 2. ? (Engine Oil) 3. Select “Notification Date” or “Notification Distance” of the reminder. 4. ? “Set” 5. ? Oil Filter change reminder: The setting procedure is the same as the “Engine Oil” reminder, but touch the “Oil Filter” item in step 2. Tires rotation reminder: The setting procedure is the same as the “Engine Oil” reminder, but touch the “Tires” item in step 2. Maintenance Schedule setting: The setting procedure is the same as the “Engine Oil” reminder, but touch the “Maintenance Schedule” item in step 2. NOTE . Touch “Reset” to reset each setting. . Touch “Update” to revert to the default value. & Dual 7.0-Inch Display Models (If Equipped) s03bs06 NOTE For 11.6-inch display models, refer to “11.6-Inch Display Models” P190. ! Main screens s03bs0601 A Upper display B Lower display 1 HOME button (Refer to “HOME button” P214.) 2 Status bar (Refer to “Status bar” P214.) – CONTINUED – Center Information Display (CID) 213 3 Instruments and Controls 3 Upper main screen (Refer to “Setting of the upper display” P215.) 4 Lower main screen (Refer to “Setting of the lower display” P218.) 5 Climate control screen (Refer to “Climate control screen” P214.) While the ignition switch is in the “ACC” or “ON” position, the touch panel will activate. ! HOME button s03bs0609 Press (HOME) to display the top menu. ! Status bar s03bs060901 The driver profiles icon, outside temperature and clock are shown on the display. NOTE . The outside temperature indicator shows the temperature around the sensor. However, the temperature may not be indicated correctly or the update may be delayed in the following conditions. – While parking or driving at low speeds – When the outside temperature changes suddenly (example: when going in and out of an underground parking area or when passing through a tunnel) – When starting the engine after being parked for a certain period of time . You can set the temperature to be displayed in Celsius or Fahrenheit. For details, refer to “Car settings” P203 (11.6-inch display models) or “Vehicle setting icons” P221 (dual 7.0-inch display models). . The clock can be shown in either 12- hour display or 24-hour display. For details about the setting, refer to “Clock” P227. . Touch the clock on the status bar to display the clock setting screen. Refer to “Clock” P227. ! Upper display s03bs060902 For details about items, refer to “Setting of the upper display” P215. For details about the following menu, refer to the separate navigation/audio Owner’s Manual. . Radio . Media . Phone . Apps . SUBARU STARLINK . Add to Shortcut ! Lower display s03bs060903 For details about the setting items, refer to “Setting of the lower display” P218. If this screen changes to the climate control screen, refer to “Dual 7.0-Inch Display Models” P263. ! Climate control screen s03bs060904 1 Climate control ON/OFF icon 2 Set temperature indicator (driver’s side) 3 SYNC mode indicator 4 Airflow mode 5 Climate control mode 6 Air inlet selection 7 Dynamic Ventilation mode indicator 8 Set temperature indicator (passenger’s side) 9 Dynamic Ventilation ON/OFF icon 10 Customizable icon 11 Fan speed control When operating the climate control system, the main screen switches to the climate control screen. For details about climate control operation, refer to “Climate 214 Center Information Display (CID) Control Panel” P262. ! Setting of the upper display s03bs0602 In this Owner’s Manual, the settings of the “General” menu will be explained. For details about other items, refer to the separate navigation/audio Owner’s Manual. ! General settings s03bs060204 The “General” menu is used to set the display, language and time. 1. Press (HOME). 2. Touch (Settings). 3. ? “General” 4. Select the preferred menu. – CONTINUED – Center Information Display (CID) 215 3 Instruments and Controls The setting adjustments to the following items can be manually changed to meet your personal requirements. Item Available settings Page reference for the vehicle system operation Page reference for the setting 1st menu 2nd menu 3rd menu procedure General Clock Time Setting Sync With Phone/Manual 227 227 Clock Format 12H/24H 228 Display Display Off Turn the screen off. — 224 Brightness Dial ON/OFF — 224 Brightness/Contrast Set and adjust the brightness and contrast of the screen display and camera display. — 224 Reminder Screen Maintenance ON/OFF 190 224 Birthday ON/OFF 224 Anniversary ON/OFF 224 Valet Mode Passcode Setting*1 keyboard: Enter New Passcode Activate Valet Mode keyboard: Enter Your Pass- 230 207 code Change Passcode keyboard: Change Passcode Meter Screen Gauge Initial Movement ON/OFF 152 224 Meter Information Screen Eco Gauge/OUT TEMP/Clock/ Gas Range 182 224 Camera Rear Camera Delay Control ON/OFF 359 224 Steering Angle Lines ON/OFF 360 224 216 Center Information Display (CID) Item Available settings Page reference for the vehicle system operation Page reference for the setting 1st menu 2nd menu 3rd menu procedure General Climate Control Customize Climate Button A/C/MAX A/C/AUTO/Recirculation/ SYNC 269 224 Temperature Unit 8F/8C — 214 224 Language — English/Français/Español 180 and 188 224 Tire Pressure Units*2 — kPa/PSi 185 224 Home Screen Shortcuts — ON/OFF *3 224 Welcome Screen — ON/OFF 181 224 Goodbye Screen — ON/OFF 181 224 Birthday List — Set a birthday. 190 225 Anniversary List — Set an anniversary day. 190 225 SUBARU STARLINK Apps Recovery — OK/Cancel *3 — SUBARU STARLINK Auto Connect — ON/OFF Factory Data Reset — Reset/Cancel System Information — — Free/Open Source Software Information — — *1: Displayed until valet mode is set. *2: If equipped *3: For details about the audio and navigation system, refer to the Owner’s Manual supplement for the audio and navigation system. NOTE Touch to display the explanation of the items. – CONTINUED – Center Information Display (CID) 217 3 Instruments and Controls ! Display Off s03bs060205 Activation of the display off mode: 1. Touch “Display Off”. Deactivation of the display off mode: 1. Touch the display or push the temperature control button. 2. Press and hold the volume knob to turn the screen back on. ! Setting of the lower display s03bs0605 Touch (Car Settings). Refer to “Vehicle setting icons” P221. This screen displays the driving status of the vehicle and the operation status of the functions. Refer to “Driving Statistics” P226. Set the timing of the maintenance. Refer to “Maintenance” P226. ! Vehicle settings while driving s03bs060502 Touch (X-MODE), (Vehicle Control), (Driving Assistance), (More Settings), or (Auto Start Stop) to display the items that are changeable while driving. 218 Center Information Display (CID) Item Available settings Page reference for the vehicle system operation Page reference for the setting 1st menu 2nd menu 3rd menu procedure X-MODE — — ON/OFF 341 224 Vehicle Control Vehicle Dynamics Control — ON/OFF 339 224 Auto Vehicle Hold (AVH) — ON/OFF 348 224 Cruise Control Acceleration — Eco/Comfort/Standard/Dynamic *1 — Steering Responsive Headlights (SRH) — ON/OFF 238 207 Driving Assistance Pre-Collision Braking System Pre-Collision Braking Setting ON/Setting OFF *1 — Forward Collision Warning Far/Normal/Near Lane Departure — All Functions/Lane Departure Prevention Function Only/ Warning Buzzer Only/OFF Auto Start Stop — — ON/OFF 356 224 More Settings Warning Volume — Min/Mid/Max *1 224 Units — km, km/h, Liter/ Miles, MPH, Gallon 152 and 180 224 Auto Start Stop — ON/OFF 356 224 *1: For details about EyeSight system, refer to the Owner’s Manual supplement for the EyeSight system. – CONTINUED – Center Information Display (CID) 219 3 Instruments and Controls ! Auto Start Stop ON/OFF icon s03bs060503 1 Auto Start Stop indicator (green) Touching “ ” deactivates the Auto Start Stop system and turns off the Auto Start Stop indicator (green) on the screen. Touching “ ” again activates the Auto Start Stop system and turns on the Auto Start Stop indicator (green). Refer to “To turn on/off the Auto Start Stop system” P356. ! Auto Vehicle Hold icon s03bs060504 To turn the Auto Vehicle Hold function on and off, touch the “Auto Vehicle Hold” icon. When the Auto Vehicle Hold function is turned off, the Auto Vehicle Hold indicator light will turn off. Refer to “To turn on/off the Auto Vehicle Hold function” P349. NOTE . When the Auto Vehicle Hold function is on, the Auto Vehicle Hold indicator light on the combination meter turns on. The “Auto Vehicle Hold” indicator also turns on at the same time. . When the Auto Vehicle Hold function is off, the Auto Vehicle Hold indicator light on the combination meter turns off. The “Auto Vehicle Hold” indicator also turns off at the same time. ! Vehicle Dynamics Control icon s03bs060505 To turn the Vehicle Dynamics Control on and off, touch the “Vehicle Dynamics Control” icon. When the Vehicle Dynamics Control system is turned off during engine operation, the Vehicle Dynamics Control OFF indicator light on the combination meter illuminates. The Vehicle Dynamics Control system will be deactivated. When “Vehicle Dynamics Control” icon has been touched again to reactivate the Vehicle Dynamics Control system, the Vehicle Dynamics Control OFF indicator light turns off. Refer to “To Turn On/Off the Vehicle 220 Center Information Display (CID) Dynamics Control System” P339. NOTE . When Vehicle Dynamics Control is on, the Vehicle Dynamics Control OFF indicator light on the combination meter turns off. The “Vehicle Dynamics Control” indicator turns on at the same time. . When Vehicle Dynamics Control is off, the Vehicle Dynamics Control OFF indicator light on the combination meter turns on. The “Vehicle Dynamics Control” indicator turns off at the same time. ! Vehicle setting icons s03bs060501 1. Press (HOME). 2. Touch (Car Settings). – CONTINUED – Center Information Display (CID) 221 3 Instruments and Controls The setting adjustments to the following items can be manually changed to meet your personal requirements. Item Available settings Page reference for the vehicle system operation Page reference for the setting 1st menu 2nd menu 3rd menu 4th menu procedure Car Settings EyeSight Pre-Collision Braking System Pre-Collision Braking Setting ON/Setting OFF *1 — Forward Collision Warning Far/Normal/Near Lane Departure — All Functions/Lane Departure Prevention Function Only/Warning Buzzer Only/OFF *1 — Cruise Control Acceleration — Eco/Comfort/Standard/ Dynamic *1 — Lead Vehicle Acquisition Sound — ON/OFF *1 224 Lead Vehicle Moving Monitor — ON/OFF *1 224 Select Drive on Left/ Drive on Right — Right Lane/Left Lane *1 — Keyless Entry System Hazard Warning Flasher — ON/OFF 127 224 Audible Signal — ON/OFF 121 and 126 224 Defogger — — 15 minutes/Continuous 246 224 Interior Light — — 10 seconds/20 seconds/ 30 seconds/OFF 283 224 Auto Light Sensor Light Sensitivity — Min/Low/Mid/Max 232 224 Wiper Link — ON/OFF 233 224 222 Center Information Display (CID) Item Available settings Page reference for the vehicle system operation Page reference for the setting 1st menu 2nd menu 3rd menu 4th menu procedure Car Settings Welcome Lighting Approaching Time Set — 30 seconds/60 seconds/ 90 seconds/OFF 233 224 Leaving Time Set — 30 seconds/60 seconds/ 90 seconds/OFF 224 One-Touch Lane Changer — — ON/OFF 241 224 Auto Door Lock/Unlock Auto Door Lock — Vehicle Speed/Shift into or out of PARK/ OFF 131 224 Auto Door Unlock — Ignition OFF/Driver Door Open/Shift into or out of PARK/OFF 224 Rear Seat Reminder — — ON/OFF 56 224 Vehicle Dynamics Control — — ON/OFF 339 224 Auto Vehicle Hold (AVH) — — ON/OFF 348 224 Auto Start Stop — — ON/OFF 356 224 X-MODE — — ON/OFF 341 224 Warning Volume — — Min/Mid/Max *1 224 Units — — km, km/h, Liter/ Miles, MPH, Gallon 152 and 180 224 *1: For details about EyeSight system, refer to the Owner’s Manual supplement for the EyeSight system. NOTE Touch to display the explanation of the items. – CONTINUED – Center Information Display (CID) 223 3 Instruments and Controls ! How to select items on the screen s03bs0610 ! ON/OFF setting s03bs061001 Example Touch the changing menu and select ON or OFF . ! Selecting s03bs061002 Example Touch the preferred setting. ! How to set items on the screen s03bs0611 ! Brightness/Contrast s03bs061101 Set and adjust the brightness and contrast of the center information display. NOTE “Brightness” can only be adjusted when “Brightness Dial” is off. Refer to “General settings” P215. 1. Touch (HOME). 2. ? (Settings) 3. ? “General” 4. ? “Display” 5. ? “Brightness/Contrast” 6. Drag to adjust the brightness and contrast. 224 Center Information Display (CID) Touch “Default” to revert to the factory setting. ! Birthday List s03bs061102 If a birthday or anniversary is approaching, a message will be displayed when the ignition switch is turned to the “ON” position. This function can be set to on or off by the “Reminder Screen”. For details, refer to “General settings” P215. 1. Touch (HOME). 2. ? (Settings) 3. ? “General” 4. ? “Birthday List” 5. ? “Add” 6. Enter the name. 7. ? “Next” 8. Enter the date. 9. ? “OK” NOTE A maximum of 5 birthdays can be stored. ! Anniversary List s03bs061103 The procedure for setting an anniversary is the same as “Birthday List” P225, except that in step 4 “Anniversary List” is selected. – CONTINUED – Center Information Display (CID) 225 3 Instruments and Controls ! Driving Statistics s03bs0603 1 Steering angle 2 Vehicle posture 3 Running condition This screen displays the driving status of the vehicle and the operation status of the functions. For functions that are operating, the indicator will illuminate or flash. NOTE . The vehicle posture indication may differ from the actual vehicle posture. . The vehicle posture angle varies not only due to the angle of the road surface, but also due to the vehicle tilt caused by the occupants, cargo, and acceleration or deceleration. ! Maintenance s03bs0604 Maintenance reminders can be set. Engine Oil setting: 1. Touch (Maintenance). 2. ? (Engine Oil) 3. Select “Notification Date” or “Notification Distance” of the reminder. 4. ? “Set” 5. ? Oil Filter setting: The setting procedure is the same as “Engine Oil” setting, but touch the “Oil Filter” item in step 2. Tires setting: The setting procedure is the same as “Engine Oil” setting, but touch the “Tires” item in step 2. Maintenance Schedule setting: The setting procedure is the same as “Engine Oil” setting, but touch the “Maintenance Schedule” item in step 2. NOTE . Touch “Reset” to reset each setting. . Touch “Update” to revert to the default value. 226 Center Information Display (CID) 3-9. Clock s03af For models with a genuine SUBARU navigation and/or audio system, the clock can be adjusted using either auto mode or manual mode. & Setting the Clock Manually s03af03 ! Dual 7.0-inch display models s03af0303 1. Turn the ignition switch to the “ON” position. 2. Press (HOME). 3. Touch (Settings). 4. ? “General” 5. ? “Clock” 6. ? “Time Setting” 7. ? “Manual” 8. ? or 9. ? “OK” NOTE The clock setting screen can also be displayed by touching the clock on the status bar. ! 11.6-inch display models s03af0304 1. Turn the ignition switch to the “ON” position. 2. Touch (HOME). 3. ? (Settings) 4. ? “General” 5. ? “Clock” 6. ? “Time Setting” – CONTINUED – Clock 227 3 Instruments and Controls 7. ? “Manual” 8. ? or 9. ? “OK” NOTE The clock setting screen can also be displayed by touching the clock on the status bar. & Setting the Clock Automatically s03af02 ! Dual 7.0-inch display models s03af0204 1. Turn the ignition switch to the “ON” position. 2. Press (HOME). 3. Touch (Settings). 4. ? “General” 5. ? “Clock” 6. ? “Time Setting” 7. ? “Sync With Phone” The clock will be set and adjusted automatically when a smartphone is connected via Bluetooth® for transferring phonebook data. 1. Register the smartphone to the audio system. For details, refer to “Bluetooth SETTINGS” in the supplemental Owner’s Manual for the audio/navigation system. 2. Transfer phonebook data to the system. For details, refer to “Bluetooth SETTINGS” in the supplemental Owner’s Manual for the audio/navigation system. The clock will be adjusted automatically. 228 Clock NOTE Depending on the model of smartphone, the settings of the connected smartphone may need to be changed. (ex: For iOS or other models, notification settings may need to be activated.) For details, check the instructions on connecting smartphones. ! 11.6-inch display models s03af0205 1. Turn the ignition switch to the “ON” position. 2. Touch (HOME). 3. ? (Settings) 4. ? “General” 5. ? “Clock” 6. ? “Time Setting” 7. Models with navigation system: ? “AUTO” Models with SUBARU STARLINK Safety and Security without navigation system: ? “AUTO” Models without SUBARU STARLINK Safety and Security or navigation system: ? “Sync With Phone” ! Models with navigation system s03af020501 The clock will be set automatically where a GPS signal is available. ! Models with SUBARU STARLINK Safety and Security without navigation system s03af020507 The clock will be set automatically where a DCM (Data Communication Module in vehicle cellular connection) signal is available. ! M o d e l s w i t h o u t S U B A R U STARLINK Safety and Security or navigation system s03af020508 The clock will be set and adjusted automatically when a smartphone is connected via Bluetooth® for transferring phonebook data. 1. Register the smartphone to the audio system. For details, refer to “Bluetooth SETTINGS” in the supplemental Owner’s Manual for the audio/navigation system. 2. Transfer phonebook data to the system. For details, refer to “Bluetooth SETTINGS” in the supplemental Owner’s Manual for the audio/navigation system. The clock will be adjusted automatically. NOTE Depending on the model of smartphone, the settings of the connected smartphone may need to be changed. (ex: For iOS or other models, notification settings may need to be activated.) For details, check the instructions on connecting smartphones. & Time Zone (Models with Navigation System) s03af06 You can configure the “Time Zone” setting on the clock setting screen. If a GPS signal is available when “AUTO” is selected, “Time Zone” is set automatically. Refer to “Main screen” P197 for the setting. & Daylight Saving Time (Models with Navigation System) s03af07 You can configure the “Daylight Saving Time” setting on the clock setting screen. – CONTINUED – Clock 229 3 Instruments and Controls If a GPS signal is available when “AUTO” is selected, “Daylight Saving Time” is set automatically. Refer to “Main screen” P197 for the setting. NOTE . When “Time Setting” is set to “AUTO”, you can change “Daylight Saving Time” and “Time Zone” settings. . When “Daylight Saving Time” is set to “AUTO”, the “Time Zone” setting can only be set to “AUTO”. 3-10. Valet Mode s03bt When leaving your vehicle with a valet service, such as at a hotel or restaurant, you can set the valet mode, which disables the navigation, audio, and vehicle setting functions. & Activation of Valet Mode s03bt01 11.6-inch display models Dual 7.0-inch display models 1. Touch “Valet Mode”. 11.6-inch display models 230 Valet Mode Dual 7.0-inch display models 2. Enter the passcode. 3. Touch “OK”. & Deactivation of Valet Mode s03bt02 11.6-inch display models Dual 7.0-inch display models 1. Touch “Valet Mode” or select OFF (11.6-inch display models). Touch “Deactivate” (dual 7.0-inch display models). 2. Enter the passcode. 3. Touch “OK”. NOTE If you enter the passcode incorrectly three times in a row when setting or canceling valet mode, a message prompting you to contact a SUBARU dealer will be displayed, but it is still possible to enter the passcode even after the fourth attempt. If you have forgotten your passcode, consult your SUBARU dealer. 3-11. Light Control Switch s03ah CAUTION . Use of any lights for a long period of time while the engine is not running can cause the battery to discharge. . Before leaving the vehicle, make sure that the light control switch is turned to the off position. If the vehicle is left unattended for a long time with the light control switch set to a position other than the off position, even though the lights will turn off after 10 minutes, the battery may be discharged. Models with “keyless access with push-button start system”: The light control switch operates when the push-button ignition switch is in the “ACC” or “ON” position. Regardless of the position of the light control switch, the illuminated lights are turned off when the push-button ignition switch is turned off. – CONTINUED – Light Control Switch 231 3 Instruments and Controls Models without “keyless access with push-button start system”: The light control switch operates when the key is inserted in the ignition switch. Regardless of the position of the light control switch, the illuminated lights are turned off when the key is removed from the ignition switch. NOTE The light control switch can be operated (except auto on/off headlights) even when under the following conditions. . When the push-button ignition switch is turned to the “OFF” position (models with “keyless access with push-button start system”) . When the key is not inserted into the ignition switch (models without “keyless access with push-button start system”) If you leave the headlights on for 10 minutes, the headlights will turn off automatically. Turn the ignition switch to the “ON” position to illuminate the exterior lights again. If the driver’s door is opened while the headlights are illuminated under such conditions, a chirp sound will inform the driver that the lights are illuminated. & Headlights s03ah01 To turn on the headlights, turn the knob on the end of the light control switch. “OFF” position (for U.S. models): The headlights are all off. Only when the following conditions are fulfilled, instrument panel illumination, headlights, parking lights, front side marker lights, rear side marker lights, tail lights and license plate lights are automatically on or off depending on the level of the ambient light. . The engine is running. . The parking brake is fully released. . The select lever is in a position other than the “P” position. “OFF” position (for Canada models): The headlights are all off.*1*2 *1: When the light switch is switched to the “OFF” position while the vehicle is stopped, the lights turn off. Then the light switch will automatically return to the “AUTO” position. *2: The headlights will automatically change to the AUTO mode when the following conditions are met: . The engine is running. . The parking brake is fully released. . The select lever is in a position other than the “P” position. “AUTO” position: Auto on/off headlights When the ignition switch is in the “ON” position, the instrument panel illumination, headlights, parking lights, front side marker lights, rear side marker lights, tail lights and license plate lights are automatically on or off depending on the level of the ambient light. NOTE . If the light control switch is in the “AUTO” position and the headlights do not turn on when it becomes dark outside, turn the light switch to the “ ” position. If this happens, have your vehicle inspected by your SUBARU dealer as soon as possible. 232 Light Control Switch . The light sensitivity of the auto on/ off headlights can be changed by operating the center information display. For details, refer to “Car settings” P203 (11.6-inch display models) or “Vehicle setting icons” P221 (dual 7.0-inch display models). Also, the setting can be changed by a SUBARU dealer. Consult your SUBARU dealer for details. “ ” position: Instrument panel illumination, parking lights, front side marker lights, rear side marker lights, tail lights and license plate lights are on. “ ” position: Instrument panel illumination, headlights, parking lights, front side marker lights, rear side marker lights, tail lights and license plate lights are on. ! Auto-on/off wiper-linked headlights s03ah0106 While the light control switch is in the “AUTO” position, the headlights will automatically turn on when the windshield wipers operate several times. The headlights will automatically turn off approximately 1 minute after the wiper stops. The ON/OFF setting of this function can be changed by operating the center information display. For details, refer to “Car settings” P203 (11.6-inch display models) or “Vehicle setting icons” P221 (dual 7.0-inch display models). Also, the setting can be changed by a SUBARU dealer. Consult your SUBARU dealer for details. ! Welcome lighting function s03ah0103 The welcome lighting function turns on the low beam headlight for smooth approaching to or exiting from the vehicle at night or in a dark place. The function is activated while all of the following conditions are met. . The light control switch is in the “AUTO” position. . It is dark enough to turn on the auto on/ off headlights. NOTE If the engine is turned off after turning off the light switch, the welcome lighting function may not operate (for Canada models). ! When approaching s03ah010301 While the welcome lighting function is activated, the low beam headlights will automatically illuminate when unlocking the doors by using the remote keyless entry system. The low beam headlights will remain illuminated for 30 seconds*1 and then turn off. However, if any of the following operations is done, the low beam headlights will turn off. . The doors are locked. . The light control switch is turned to a position other than “AUTO”. ! When exiting s03ah010302 While the welcome lighting function is activated, the low beam headlights will remain illuminated even when either of the following operation is done. . The push-button ignition switch is turned to the “OFF” status (models with “keyless access with push-button start system”). . The key is pulled out from the ignition switch (models without “keyless access with push-button start system”). The low beam headlights will turn off under any of the following conditions. . 3 minutes have passed since the low beam headlights were illuminated by the welcome lighting function. . 30 seconds have passed since the door is opened and closed.*1 . The light control switch is turned to a position other than “AUTO”. – CONTINUED – Light Control Switch 233 3 Instruments and Controls . The locking procedure is performed twice. When performing the unlocking procedure after performing the locking procedure, perform the locking procedure twice again. *1: The setting for the period of time in which the low beam headlights remain on by the welcome lighting function can be changed by a SUBARU dealer. Contact your SUBARU dealer for details. Also, you can change the setting by operating the center information display. For details, refer to “Car settings” P203 (11.6-inch display models) or “Vehicle setting icons” P221 (dual 7.0- inch display models). ! Sensor for the auto on/off headlights s03ah0101 The sensor is on the dashboard as shown in the illustration. CAUTION If any object is placed on or near the sensor, the sensor may not detect the level of the ambient light correctly and the auto on/off headlights may not operate properly. & High/Low Beam Change (Dimmer) s03ah02 While the light control switch is in the “ ” or “AUTO” position in a dark place, the headlights will turn on. Pushing the lever forward and releasing it will activate the high beam. Pulling the lever rearward and releasing it will switch the headlights to low beam. When the light control switch is in the “AUTO” position, pushing the lever forward turns the High Beam Assist is on. Refer to “High Beam Assist Function” P235. When the headlights are on high beam, the high beam indicator light “ ” on the combination meter is also on. 234 Light Control Switch & Headlight Flasher s03ah03 CAUTION Do not hold the lever in the flashing position for more than just a few seconds. To flash the headlights, pull the lever toward you and then release it. The high beam will stay on for as long as you hold the lever. The headlight flasher works even though the lighting switch is in the off position. When the headlights are on high beam, the high beam indicator light “ ” on the combination meter also illuminates. & High Beam Assist Function s03ah07 NOTE . The high beam assist function utilizes the stereo camera installed at the position of the front map lights. . For details on how to handle the stereo camera, refer to the Owner’s Manual supplement for the EyeSight system. The high beam assist function automatically changes the headlight from high beam to low beam (or vice versa). When all of the following conditions are met, the headlight will change to high beam. . When the vehicle speed increases to or above 20 mph (32 km/h). . There is no preceding or oncoming vehicle. . The forward area of the vehicle is dark. . The road does not have a sharp curve. When any of the following conditions are met, the headlight will change to low beam. . When the vehicle speed decreases to or below 10 mph (16 km/h). . When the forward area of the vehicle is bright. . When there is a preceding or oncoming vehicle. . When the EyeSight system is malfunctioning or is temporarily stopped. NOTE . Do not overestimate the capacity of the high beam assist function. The driver always has the responsibility to understand the surrounding situation, to drive safely, and to change the headlight mode manually if necessary. . The factory setting (default setting) for this function is set as “operational”. This setting can be changed to OFF (non-operation) at SUBARU dealers. For more details, contact a SUBARU dealer. ! How to use the high beam assist function s03ah0701 The high beam assist function will be activated when all the following conditions are met. . The light control switch is in the “AUTO” position and the low beam headlights are on automatically. . The turn signal lever is pushed forward. – CONTINUED – Light Control Switch 235 3 Instruments and Controls High beam assist indicator When the high beam assist function is activated, the high beam assist indicator on the combination meter will illuminate. NOTE If the high beam assist function is malfunctioning or is temporarily stopped, the headlight will be fixed at low beam. ! How to temporarily lower the sensitivity of the high beam assist function s03ah0704 The sensitivity of the high beam assist function can be lowered by using the following operations. 1. After turning the ignition switch to the “ON” position, set the light control switch to the “AUTO” position and push the signal lever forward (high beam position). 2. After the high beam assist indicator on the combination meter will illuminate, turn the ignition switch to the “OFF” position. 3. Turn the ignition switch to the “ON” position and within approximately 15 seconds, press the “ / ” (following distance setting) switch more than 10 times consecutively. When the sensitivity of the high beam assist function is lowered, the high beam assist indicator light “ ” on the combination meter display (color LCD) will flash. NOTE . The sensitivity of the high beam assist function cannot be lowered in the following conditions. – Cruise control indicator is illuminated. – The EyeSight warning indicator (yellow) is illuminated. . The sensitivity of the high beam assist function returns to normal level the next time the ignition switch is turned to the “LOCK”/ “OFF” position and the engine is restarted. ! How to change the headlight mode manually s03ah0702 Change to the low beam: . Set the light control switch to “ ”. . Pull the lever while the high beam is turning on and release it. Change to the high beam: Push the lever forward and release it. At this time, the high beam assist function will turn off, the high beam assist indicator will turn off and the high beam indicator light will turn on. NOTE . After manually changing the headlight mode to the high beam, if you turn on the high beam assist function, push the lever forward and release it. . When manually changing the headlight mode to the high beam, if you turn the light control switch to the “ ” position, the parking lights, front side marker lights, rear side marker lights, tail lights and license plate lights will turn on. 236 Light Control Switch ! Tips for the high beam assist system s03ah0703 . The high beam assist function recognizes the condition surrounding the vehicle based on the brightness of illumination ahead of your vehicle, etc. Therefore, the headlight mode may switch in some situations that do not match to the driver’s sense. . A bicycle or cargo cycle may not be detected. . Under the following situations, the brightness of ambient illumination may not be detected correctly and the high beam assist function may not work properly. As a result, the glare of the high beam may disturb the oncoming vehicle or vehicle ahead. Also, the low beam mode may continue although there are no oncoming vehicles and vehicles ahead. In the such cases, change the headlight mode manually. – In bad weather (fog, snow, sand storm, heavy rain, etc.). – When the windshield glass is dirty or fogged. – When the windshield is cracked or damaged. – If there are lights similar to the headlights or the tail lights in the surrounding area. – When an oncoming vehicle or vehicle ahead is driven without its headlights and tail lights on. – If the headlights of an oncoming vehicle or the tail lights of a vehicle ahead are dirty or discolored, or if the light beams are not aimed correctly. – When a rapid change of brightness continues while driving. – When driving on a road with many ups and downs or uneven surfaces. – When driving on a road with many curves. – When there are some objects that reflect light strongly, such as a road sign or a mirror in vehicle ahead. – When the rear part of the vehicle ahead, such as a container, reflects light strongly. – When the headlights of your vehicle are damaged or dirty. – When your vehicle is tilted, such as in case the vehicle has a flat tire or is being towed. – When the stereo camera is deformed or the stereo camera lenses are dirty. – Immediately after the engine has started. . In the following conditions, the headlight mode will not be automatically changed from the high beam to the low beam. – When your vehicle passes an oncoming vehicle suddenly in a blind curve. – When another vehicle passes in front of your vehicle. – When an oncoming vehicle or vehicle ahead comes in and out of view because of continuous curves, median strips, roadside trees, etc. . If the stereo camera detects the light of the front fog lights of an oncoming vehicle, the headlight mode may change from the high beam to the low beam automatically. . The headlight mode may change from the high beam to the low beam, or the low beam mode may continue, when affected by a street light, traffic signal, illumination of an advertisement board, or a reflective object such as a road sign and signboard. . The timing of the change of headlight mode may differ due to the following factors. – Color or brightness of the headlights of an oncoming vehicle or the tail lights of a vehicle ahead. – The headlights of the oncoming vehicle or the tail lights of the vehicle ahead are covered with mud, snow, – CONTINUED – Light Control Switch 237 3 Instruments and Controls etc. – Movement and direction of an oncoming vehicle or a vehicle ahead. – When the headlights of an oncoming vehicle or the tail lights of a vehicle ahead illuminate on only one side. – When the oncoming vehicle or vehicle ahead is a motorcycle. – Conditions of a road (slope, curve, road surface, etc.). – Number of passengers and weight of loaded cargo. – Limitation of the detection ability of the stereo camera. & Daytime Running Light System s03ah04 WARNING When the daytime running lights are illuminated, the tail lights do not illuminate. When it becomes dark outside, turn the light switch to the “ ” position to illuminate the headlights and tail lights. This will improve visibility and allow other drivers to see your vehicle more easily. The daytime running lights will automatically illuminate when the following conditions are fulfilled. . The engine is running. . The parking brake is fully released. . The light control switch is in “AUTO”, “ ” or “OFF”. . The select lever is in a position other than the “P” position. NOTE When the light switch is in the “ ” position, the instrument panel illumination, front side marker lights, tail lights and license plate lights are also illuminated. 3-12. Steering Responsive Headlight (SRH) s03bl 1 The target area of illumination when SRH is activated 2 The target area of illumination when SRH is not activated SRH is a function that automatically moves the headlight beam to the left or right in accordance with the steering angle and vehicle speed. This function helps to improve the visibility at night by illuminating the road ahead at corners and intersections. You can turn the SRH function on or off. The settings can be changed by using the center information display. For details, refer to “Car settings” P203. 238 Steering Responsive Headlight (SRH) 1 Steering Responsive Headlight OFF indicator light The Steering Responsive Headlight OFF indicator light on the combination meter display (color LCD) turns off when SRH is turned on. The Steering Responsive Headlight OFF indicator light on the combination meter display (color LCD) illuminates when SRH is turned off. 1 Steering Responsive Headlight warning light If SRH is malfunctioning, the Steering Responsive Headlight warning light on the combination meter display (color LCD) illuminates and a message appears on the warning screen when the ignition switch is in the “ON” position. It indicates that SRH has been deactivated. Contact a SUBARU dealer for an inspection. NOTE . The SRH function operative/non-operative status is kept when the engine is turned off, even if the engine is restarted. . When you turn the ignition switch to the “ON” position, the Steering Responsive Headlight OFF indicator light will illuminate and turn off after several seconds. . SRH only activates when the vehicle is traveling forward at the speed of approximately 5 mph (8 km/h) or more. Steering Responsive Headlight (SRH) 239 3 Instruments and Controls 3-13. Headlight Beam Leveler s03at The LED headlights produce more light than conventional halogen headlights. When the vehicle is carrying a heavy load and the headlight beams are angled upwards, the driver of an oncoming vehicle may experience glare. To prevent this, the automatic headlight beam leveler adjusts the headlights to the optimum height automatically depending on the load the vehicle is carrying. CAUTION In certain circumstances, the headlights may become misaligned, and the headlight beam leveler will not reset them to the proper angle. This may occur after transporting your vehicle on a flat-bed truck, or if the vehicle is parked and restarted on different angles. In such cases, have the headlight alignment checked by a SUBARU dealer. 3-14. Front Fog Light Switch (If Equipped) s03ba 1 Headlight switch 2 Fog light switch To turn on the front fog lights: Turn the fog light switch to the “ ” position while the headlights are in either of the following conditions. . The headlight switch is in the “ ” position with the low beam mode selected. . The headlight switch is in the “AUTO” position and the low beam headlights turn on automatically. To turn off the front fog lights: Turn the fog light switch back down to the “OFF” position. Front fog light indicator light The indicator light located on the combination meter will illuminate when the front fog lights are on. 240 Headlight Beam Leveler 3-15. Turn Signal Lever s03ai 1 Right turn 2 Lane change right signal 3 Lane change left signal 4 Left turn If the lever does not return after cornering, return the lever to the neutral position by hand. To signal a lane change, push the turn signal lever up or down slightly and hold it during the lane change. The lever will return automatically to the neutral position when you release it. & One-Touch Lane Changer s03ai01 To flash the turn signal and turn signal indicator light three times, push the turn signal lever up or down slightly and immediately release it. NOTE The operational/non-operational setting of the one-touch lane changer can be changed by a SUBARU dealer. Contact the nearest SUBARU dealer for details. The setting can also be changed by operating the center information display. For details, refer to “Car settings” P203 (11.6-inch display models) or “Vehicle setting icons” P221 (dual 7.0-inch display models). 3-16. Wiper and Washer s03am WARNING In freezing weather, do not use the windshield washer until the windshield is sufficiently warmed by the defroster. Otherwise the washer fluid can freeze on the windshield, blocking your view. CAUTION . Do not operate the washer continuously for more than 10 seconds, or when the washer fluid tank is empty. This may cause overheating of the washer motor. Check the washer fluid level frequently, such as at fuel stops. . Do not operate the wipers when the windshield is dry. This may scratch the glass, damage the blade rubbers and might cause the wiper motor to fail. Before operating the wiper on a dry windshield, always use the windshield washer. – CONTINUED – Turn Signal Lever 241 3 Instruments and Controls . In freezing weather, be sure that the blade rubbers are not frozen to the windshield or rear window before switching on the wipers. Attempting to operate the wiper with the blade rubbers frozen to the window glass could cause not only the blade rubbers to be damaged but also might cause the wiper motor to fail. If the blade rubbers are frozen to the window glass, be sure to operate the defroster or windshield wiper deicer (if equipped) or rear window defogger before turning on the wiper. . If the wipers stop during operation because of ice or some other obstruction on the window, this might cause the wiper motor to fail even if the wiper switch is turned off. If this occurs, promptly stop the vehicle in a safe location, turn the ignition switch to the “LOCK”/“OFF” position and clean the window glass to allow proper wiper operation. . Use clean water if windshield washer fluid is unavailable. In areas where water freezes in winter, use SUBARU Windshield Washer Fluid or the equivalent. Refer to “Windshield Washer Fluid” P483. Also, when driving the vehicle when there are freezing temperatures, use non-freezing type wiper blades. . Do not clean the wiper blades with gasoline or a solvent, such as paint thinner or benzine. This will cause deterioration of the wiper blades. NOTE . The windshield wiper motor is protected against overloads by a circuit breaker. If the motor operates continuously under an unusually heavy load, the circuit breaker may trip to stop the motor temporarily. If this happens, park your vehicle in a safe location, turn off the wiper switch, and wait for approximately 10 minutes. The circuit breaker will reset itself, and the wipers will again operate normally. . Clean your blade rubbers and window glass periodically with a washer solution to prevent streaking, and to remove accumulations of road salt or road film. Operate the windshield washer for at least 1 second so that washer solution will be sprinkled all over the windshield or rear window. . Grease, wax, insects, or other material on the windshield or the wiper blade results in jerky wiper operation and streaking on the glass. If you cannot remove the streaks after operating the windshield washer or if the wiper operation is jerky, clean the outer surface of the windshield and rear window using a sponge or soft cloth with a neutral detergent or mild-abrasive cleaner. Do not, however, use detergent to clean the blade rubbers. Use only a sponge or soft cloth (and no neutral detergent or mild abrasive cleaner) when you clean the blade rubbers. If you wipe the rubber of the blade strongly, the black coating component will peel off, which will cause the wiper to judder. Also, after wiping it off, check that the rubber has not come loose. After cleaning the window glass and wiper blade rubbers, be sure to rinse them with clean water. Rinse the window until the water does not form beads on the glass. This indicates that the glass is clean. . If you cannot eliminate the streaking even after following this procedure, replace the wiper blades (or blade 242 Wiper and Washer rubbers) with new ones. For replacement instructions, refer to “Replacement of Wiper Blades” P484. & Windshield Wiper and Washer Switches s03am01 The wiper operates only when the ignition switch is in the “ON” position. ! Windshield wipers s03am0101 Type-A Type-B : Mist (for a single wipe) OFF/ : Off : Intermittent : Low speed : High speed To turn the wipers on, push the wiper control lever down. To turn the wipers off, return the lever to the “OFF”/“ ” position. For a single wipe of the wipers, push the lever up. The wipers operate until you release the lever. ! Wiper intermittent time control s03am0103 When the wiper switch is in the “ ” position, turn the dial to adjust the operating interval of the wiper. The operating interval can be adjusted in several steps from the shortest interval to the longest. – CONTINUED – Wiper and Washer 243 3 Instruments and Controls ! Windshield washer s03am0104 To wash the windshield, pull the wiper control lever toward you. The washer fluid sprays until you release the lever. The wipers operate while you pull the lever. Windshield washer fluid warning light NOTE The windshield washer fluid warning light appears when the washer fluid level in the tank has dropped to the lower limit. If the warning light appears, refill the tank with fluid. For the tank refilling method, refer to “Windshield Washer Fluid” P483. & Rear Window Wiper and Washer Switch s03am02 The wiper operates only when the ignition switch is in the “ON” position. 1 Type-A 2 Type-B : Washer (accompanied by wiper operation) : Continuous : Intermittent OFF/ : Off : Washer (accompanied by wiper operation) ! Rear wiper s03am0201 To turn the rear wiper on, turn the knob switch upward. To turn the wiper off, return the knob switch to the “OFF”/“ ” position. 244 Wiper and Washer With the switch turned to the “ ” position, the rear wiper will operate intermittently at intervals corresponding to the vehicle speed. In this position, when you move the select lever to the “R” position, the rear wiper will switch to continuous operation. When you move the select lever from the “R” (reverse) position to another position, the rear wiper will return to intermittent operation. Reverse gear interlocked rear wiper: Even if the rear wiper switch is in the “OFF”/“ ” position, if the front windshield wiper is operating continuously, the rear wiper will operate intermittently when you move the select lever to the “R” (reverse) position. The factory setting (default setting) of the reverse gear interlocked rear wiper is operational. This setting can be changed by a SUBARU dealer. Consult your SUBARU dealer for details. CAUTION Do not attach anything that disturbs the rear wiper operation on the rear gate. Doing so may damage the rear wiper when it operates. ! Washer s03am0202 To wash the rear window while the rear wiper is operating, turn the knob switch upward to the “ ” position. The washer fluid sprays until you release the knob. To wash the rear window when the rear wiper is not in use, turn the knob switch downward to the “ ” position. The washer fluid sprays and the wiper operates until you release the knob. The rear view camera washer also operates while the rear window washer is operating. Windshield washer fluid warning light NOTE The windshield washer fluid warning light appears when the washer fluid level in the tank has dropped to the lower limit. If the warning light appears, refill the tank with fluid. For the tank refilling method, refer to “Windshield Washer Fluid” P483. Wiper and Washer 245 3 Instruments and Controls 3-17. Defogger and Deicer s03bi 1 Rear window defogger 2 Outside mirror defogger (if equipped) 3 Windshield wiper deicer (if equipped) The defogger and deicer system is activated only when the ignition switch is in the “ON” position. Defogger button (dual 7.0-inch display models) Defogger button (11.6-inch display models) To activate the defogger and deicer system, press the defogger button. The rear window defogger, outside mirror defogger and windshield wiper deicer are activated simultaneously. The indicator light on the defogger button illuminates while the defogger and deicer system is activated. To turn them off, press the defogger button again. They also turn off when the ignition switch is turned to the “ACC” or “LOCK”/ “OFF” position. The defogger and deicer system will automatically shut off after approximately 15 minutes. If the rear window and outside mirrors have been cleared and the windshield wiper blade rubbers have been deiced completely before that time, press the defogger button to turn them off. If defrosting, defogging or deicing is not complete, you have to press the defogger button to turn them on again. It is possible to set the defogger and deicer system for the continuous operation mode by operating the center information display. For details, refer to “Car settings” P203 (11.6-inch display models) or “Vehicle setting icons” P221 (dual 7.0- inch display models). 246 Defogger and Deicer CAUTION . To prevent the battery from being discharged, do not operate the defogger and deicer system continuously for any longer than necessary. . Do not use sharp instruments or window cleaner containing abrasives to clean the inner surface of the rear window. They may damage the conductors printed on the window. NOTE . Turn on the defogger and deicer system if the wipers are frozen to the windshield. . If the windshield is covered with snow, remove the snow so that the windshield wiper deicer works effectively. . While the defogger and deicer system is in the continuous operation mode: – If the vehicle speed remains at 9 mph (15 km/h) or lower for 15 minutes, the windshield wiper deicer system automatically stops operating. However, the rear window defogger system and outside mirror defogger system maintain continuous operation in this condition. – If the vehicle battery voltage drops below the permissible level, continuous operation of the defogger system and deicer system is canceled and the system stops operating. 3-18. Mirrors s03ap Always check that the inside and outside mirrors are properly adjusted before you start driving. & Inside Mirror (without Auto- Dimming Function) (If Equipped) s03ap08 1 Normal position 2 Anti-glare position Push the tab on the mirror for normal use. To reduce glare from the headlights of the vehicle behind you, pull the tab to the antiglare position. – CONTINUED – Mirrors 247 3 Instruments and Controls & Auto-Dimming Mirror/Compass (If Equipped) s03ap12 1 Compass 2 Switch During nighttime driving, the auto-dimming feature senses distracting glare from vehicle headlights behind you and automatically dims to eliminate the glare and preserve your vision. ! To Operate the Auto-Dimming Feature s03ap1201 Press the “ ” switch to turn the autodimming feature on/off. The auto-dimming feature is enabled when the switch’s green LED indicator is on. The auto-dimming feature will default to on with each ignition cycle. ! To Operate the Compass Feature s03ap1202 1. To turn the compass feature on/off, press and hold the “ ” switch for more than 3 seconds or until the display turns on/off. The compass feature will default to on with each ignition cycle. 2. If the display reads “C”, slowly drive the vehicle in circles until compass is calibrated. Compass calibration zones 3. To adjust for compass zone variance: (1) Find your current location and zone number on the map. (2) Press and hold the “ ” switch for more than 6 seconds or until a zone number appears in the display. (3) Once the zone number appears in the display, toggle the “ ” switch again until your current location zone number appears. After you stop pressing the switch, your new zone number will be saved. Within a few seconds, the display will show a compass direction. 4. If the vehicle’s magnetics have changed or if the compass appears inaccurate, recalibrate the compass. Press and hold the “ ” switch for more than 9 seconds or until a “C” appears in the display. Once a “C” appears in the display, slowly drive the vehicle in circles until compass is calibrated. 248 Mirrors & Auto-Dimming Mirror/Compass with HomeLink® (If Equipped) s03ap07 1 Compass 2 HomeLink® buttons 3 Switch During nighttime driving, the auto-dimming feature senses distracting glare from vehicle headlights behind you and automatically dims to eliminate the glare and help preserve your vision. ! To Operate the Auto-Dimming Feature s03ap0705 Press the “ ” switch to turn the autodimming feature on/off. The auto-dimming feature is enabled when the switch’s green LED indicator is on. The auto-dimming feature will default to on with each ignition cycle. ! To Operate the Compass Feature (if equipped) s03ap0706 1. To turn the compass feature on/off, press and hold the “ ” switch for more than 3 seconds or until the display turns on/off. The compass feature will default to on with each ignition cycle. 2. If the display reads “C”, slowly drive the vehicle in circles until compass is calibrated. Compass calibration zones (U.S.) Compass calibration zones (South America) 3. To adjust for compass zone variance: (1) Find your current location and zone number on the map. (2) Press and hold the “ ” switch for more than 6 seconds or until a zone number appears in the display. (3) Once the zone number appears in the display, toggle the “ ” switch again until your current location zone number appears. After you stop pressing the switch, your new zone number will be saved. Within a few seconds, the display will show a compass direction. 4. If the vehicle’s magnetics have changed or if the compass appears inaccu- – CONTINUED – Mirrors 249 3 Instruments and Controls rate, recalibrate the compass. Press and hold the “ ” switch for more than 9 seconds or until a “C” appears in the display. Once a “C” appears in the display, slowly drive the vehicle in circles until compass is calibrated. ! HomeLink® Wireless Control System s03ap0704 The HomeLink® Wireless Control System provides a convenient way to replace up to three hand-held radio frequency remotes used to activate devices such as gate operators, garage door openers, entry door locks, security systems, even home lighting. The below steps are generic programming instructions; for Genie and Sommer garage door openers please go directly to the HomeLink® website. Additional information and programming videos can be found at www.HomeLink. com and www.youtube.com/HomeLink- Gentex. CAUTION . Before programming HomeLink® to a garage door opener or gate operator, make sure that people and objects are out of the way of the device to prevent potential harm or damage. . When programming a garage door opener, it is advised to park outside of the garage. . Do not use HomeLink® with any garage door opener that lacks safety stop and reverse features as required by U.S. federal safety standards (this includes any garage door opener model manufactured before April 1, 1982). A garage door that cannot detect an object signaling the door to stop and reverse does not meet current U.S. federal safety standards. . It is also recommended that a new battery be placed in the handheld remote (garage door opener remote) of the device for quicker and more accurate training. . Turn the ignition switch to the “ON” or “ACC” position before programming and/or operating HomeLink®. . Keep the hand-held remote (garage door opener remote) of the device you are programming for use in other vehicles as well as for future HomeLink® programming. . For security reasons, when transferring ownership of your vehicle, it is recommended to delete the programmed HomeLink® butt o n s . R e f e r t o “ E r a s i n g HomeLink® buttons” P253. ! Programming a New HomeLink® button s03ap070409 1 Indicator Light 2 HomeLink® buttons 1. Press and release the HomeLink® button that you would like to program. The HomeLink® indicator light will flash orange slowly (if not, refer to “Erasing HomeLink® buttons” P253). 250 Mirrors 1 Garage door opener remote 2. Position the hand-held remote (garage door opener remote) 1 to 3 inches (2 to 8 cm) away from the HomeLink® button that you would like to program. NOTE Some hand-held remotes (garage door opener remotes) may actually train better at a distance of 6 to 12 inches (15 to 30 cm). Keep this in mind if you have difficulty with the programming process. 3. While the HomeLink® indicator light is flashing orange, press and hold the hand-held remote button. Continue pressing the hand-held remote button until the HomeLink® indicator light changes from orange to green. You may now release the hand-held remote button. NOTE Some devices may require you to replace this “Programming a New HomeLink® button” step 3 with procedures noted in the “Gate Operator / Canadian Programming” section. Refer to “Gate Operator/Canadian Programming” P253. 1 Indicator Light 4. Press the HomeLink® button that you would like to program and observe the indicator light. . If the indicator light remains constant green, your device should operate when the HomeLink® button is pressed. At this point, if your device operates, programming is complete. . If the indicator light rapidly flashes green, firmly press, hold for two seconds and release the HomeLink® button up to three times to complete the programming process. At this point if your device operates, programming is complete. If the device does not operate, continue with the next step of the programming instructions. – CONTINUED – Mirrors 251 3 Instruments and Controls 1 “Learn” button 5. At the garage door opener motor, (security gate motor, etc.) locate the “Learn”, “Smart”, or “Program” button. This can usually be found where the hanging antenna wire is attached to the motor-head unit (see the device’s manual to identify this button). The name and color of the button may vary by manufacturer. NOTE A ladder and/or second person may simplify the following steps. 6. Firmly press and release the “Learn”, “Smart”, or “Program” button. You now have 30 seconds in which to complete step 7. 7. Return to the vehicle and firmly press, hold for 2 seconds and release the HomeLink® button up to three times. At this point programming is complete and your device should operate when the HomeLink® button is pressed and released. 1 Status Indicators 8. If status indicator arrows appear next to the indicator light, please refer to “Garage Door Two-Way Communication” P253. In the event that there are still programming difficulties or questions, additional HomeLink® information and programming videos can be found at www.HomeLink.com and www.youtube.com/HomeLinkGentex. For Genie and Sommer garage door openers please go directly to the HomeLink® website. 252 Mirrors ! Gate Operator/Canadian Programming s03ap070410 Canadian radio-frequency laws require transmitter remote signals to “time-out” (or quit) after several seconds of transmission, which may not be long enough for HomeLink® to pick up the signal during programming. Similar to this Canadian law, some U.S. gate operators are designed to “time-out” in the same manner. The indicator LED on the hand-held remote will go off when the device times out, indicating that it has finished transmitting. If you live in Canada or you are having difficulties programming a gate operator or garage door opener by using the programming procedures, replace “Programming a New HomeLink® button” step 3 with the following: While the HomeLink® indicator light is flashing orange, press and release (“cycle”) your device’s hand-held remote every two seconds until the HomeLink® indicator light changes from orange to green. You may now release the hand-held remote button. NOTE If programming a garage door opener or gate operator, it is advised to unplug the device during the “cycling” process to prevent possible overheating. Proceed with “Programming a New HomeLink® button” step 4 to complete. ! Using HomeLink® s03ap070411 To operate, simply press and release the programmed HomeLink® button. Activation will now occur for the trained device (i.e. garage door opener, gate operator, security system, entry door lock, home/ office lighting, etc.). For convenience, the hand-held remote of the device may also be used at any time. ! Erasing HomeLink® buttons s03ap070412 To erase programming from the three buttons (individual buttons cannot be erased but can be “reprogrammed” as outlined below), follow the step noted: Press and hold the two outer HomeLink® buttons for at least 10 seconds. The LED indicator will change from continuously lit to rapidly flashing. Release both buttons. Do not hold for longer than 20 seconds. HomeLink® is now ready to be programmed at any time beginning with “Programming a New HomeLink® button” – step 1. ! R e p r o g r a m m i n g a S i n g l e HomeLink® button s03ap070406 To program a previously trained button, follow these steps: 1. Press and hold the desired HomeLink® button. DO NOT release the button. 2. The indicator light will begin to slowly flash orange after 20 seconds. The HomeLink® button can be released at this point. Proceed with “Programming a New HomeLink® button” – step 3. 3. If you do not complete the programming of a new device to the button, it will revert to the previously stored programming. ! Garage Door Two-Way Communication s03ap070413 HomeLink® has the capability of communicating with your garage door opener. HomeLink® can receive and display “closing” or “opening” status messages from compatible garage door opener systems. At any time, HomeLink® can also recall and display the last recorded status communicated by the garage door opener to indicate your garage door being “closed” or “opened”. HomeLink® has the capability of receiving this communication from the garage door opener at a range up to 820 feet (250 m). – CONTINUED – Mirrors 253 3 Instruments and Controls Range may be reduced by obstacles such as houses or trees. You may have to slow your vehicle speed to successfully receive the garage door opener communication. ! Programming Two-Way Communication s03ap070414 1 Status Indicators Within 5 seconds after programming a new HomeLink® button, both of HomeLink’s garage door status indicators will flash rapidly green indicating that the garage door two-way communication has been enabled. If your garage door status indicators flashed, two-way communication programming is complete. If the garage door status indicators do not flash, additional HomeLink® information and programming videos can be found online at www.HomeLink.com and www.youtube.com/HomeLinkGentex. ! Using Two-Way Communication s03ap070415 1 Status Indicator Recall and display (at any time) the last recorded garage door status message communicated to HomeLink® by simultaneously pressing HomeLink® buttons 1 and 2 for 2 seconds. HomeLink® will display the last recorded status for 3 seconds. If two-way communication programming is successful, HomeLink® will display the status of your garage door opener with arrow indicators (see below). 1 Garage Door Opener CLOSING (Blinking Orange) 2 Garage Door Opener CLOSED (Solid Green) 3 Garage Door Opener OPENING (Blinking Orange) 4 Garage Door Opener OPENED (Solid Green) ! Certification s03ap070416 In the event that there are still programming difficulties or questions, additional HomeLink® information and programming videos can be found at www.HomeLink.com, www.youtube.com/HomeLinkGentex, or by calling the toll-free HomeLink-hotline at 1-800-355-3515. 254 Mirrors . U.S.-spec. models CAUTION FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. . Canada-spec. models – CONTINUED – Mirrors 255 3 Instruments and Controls HomeLink® and the HomeLink® house are registered trademarks of Gentex Corporation. WARNING . W h e n p r o g r a m m i n g t h e HomeLink® Wireless Control System, you may be operating a garage door opener or other device. Make sure that people and objects are out of the way of the garage door or other device to prevent potential harm or damage. . Do not use the HomeLink® Wireless Control System with a garage door opener that lacks the safety stop and reverse feature as required by applicable safety standards. A garage door opener which cannot detect an object, signaling the door to stop and reverse, does not meet these safety standards. Using a garage door opener without these features increases risk of serious injury or death. For more information, consult the HomeLink® website at www.homelink.com or call 1-800-355-3515. & Outside Mirrors s03ap03 ! Convex mirror (passenger side) s03ap0301 WARNING Objects look smaller in a convex mirror and farther away than when viewed in a flat mirror. Do not use the convex mirror to judge the distance of vehicles behind you when changing lanes. Use the inside mirror (or glance backwards) to determine the actual size and distance of objects that you view in convex mirror. CAUTION Make sure to adjust the mirrors before driving. 256 Mirrors ! Remote control mirror switch s03ap0302 : Select side to adjust : Direction control The remote control mirrors operate when the ignition switch is in the “ON” or “ACC” position. 1. Turn the control switch to the side that you want to adjust. “L” is for the left mirror, “R” is for the right mirror. 2. Move the control switch in the direction you want to move the mirror. 3. Return the control switch to the neutral position to prevent unintentional operation. NOTE The mirrors can also be adjusted manually. 3-19. Tilt/Telescopic Steering Wheel s03bf WARNING . Do not adjust the steering wheel tilt/telescopic position while driving. This may cause loss of vehicle control and result in personal injury. . If the lever cannot be raised to the fixed position, adjust the steering wheel again. It is dangerous to drive without locking the steering wheel. This may cause loss of vehicle control and result in personal injury. – CONTINUED – Tilt/Telescopic Steering Wheel 257 3 Instruments and Controls 1 Tilt adjustment 2 Telescopic adjustment 1. Adjust the seat position. Refer to “Front Seats” P30. 2. Pull the tilt/telescopic lock lever down. 3. Move the steering wheel to the desired level. 4. Pull the lever up to lock the steering wheel in place. 5. Make sure that the steering wheel is securely locked by moving it up and down, and forward and backward. & Heated Steering Wheel System (If Equipped) s03bf01 The Heated Steering Wheel system warms the steering wheel at a constant temperature. 1 Heated Steering Wheel switch 2 Indicator light 3 Heated area To turn on the Heated Steering Wheel system, pull the Heated Steering Wheel switch when the ignition switch is in the “ON” or “ACC” position. Then the steering wheel will be warmed and the indicator light on the switch will illuminate. To turn off the Heated Steering Wheel system, pull the switch again. Then the indicator light will turn off. CAUTION . Use the Heated Steering Wheel system with the engine running. Otherwise, the battery voltage may drop below the permissible level and it may not be possible to start the engine. . There is a possibility that people with delicate skin may suffer slight burns even at low temperatures if they use the Heated Steering Wheel for a long period of time. When using the Heated Steering Wheel, always be sure to warn the persons concerned. . Do not cover the Heated Steering Wheel with an object such as a steering wheel cover. Doing so may cause the Heated Steering Wheel to overheat. . Do not spill liquid on the steering wheel. If liquid is spilled, wipe it off immediately and dry it before using the Heated Steering Wheel system. 258 Tilt/Telescopic Steering Wheel NOTE . If the surface temperature of the steering wheel is approximately above 1048F (408C) when the switch is turned on, the system will not heat the steering wheel. Then, the indicator light will continue to illuminate. . The Heated Steering Wheel system will automatically turn off approximately 30 minutes after the system has been turned on. . The temperature of the Heated Steering Wheel system cannot be adjusted. 3-20. Horn s03ar To sound the horn, push the horn pad. Horn 259 3 Instruments and Controls———————— — — — — — — — — s04 4-1. Ventilator Control 262 Center Ventilators . 262 Side Ventilators 262 4-2. Climate Control Panel 262 Dual 7.0-Inch Display Models 263 11.6-Inch Display Models 265 4-3. Automatic Climate Control Operation. 267 Sensors 268 4-4. Manual Climate Control 269 Airflow Mode Selection . 269 Dynamic Ventilation 270 Temperature Control . 271 Fan Speed Control 272 Air Conditioner Control. 272 Air Inlet Selection . 272 To Turn Off the Climate Control System 273 4-5. Defrosting 273 4-6. Operating Tips for Heater and Air Conditioner 274 Cleaning Ventilator Grille 274 Efficient Cooling after Parking in Direct Sunlight . 274 Lubrication Oil Circulation in the Refrigerant Circuit 274 Checking Air Conditioning System before Summer Season. 274 Cooling and Dehumidifying in High Humidity and Low Temperature Weather Condition . 275 Air Conditioner Compressor Shut-Off When Engine Is Heavily Loaded . 275 Refrigerant for Your Climate Control System 275 4-7. Air Filtration System .275 Replacing the Cabin Air Filter. 276 Climate Control 4 Climate Control 4-1. Ventilator Control s04af & Center Ventilators s04af01 To adjust the airflow direction, move the tab. To close the ventilator, move the tab all the way down. & Side Ventilators s04af02 1 Open 2 Close To adjust the airflow direction, move the tab. 4-2. Climate Control Panel s04ag WARNING . The cooling function operates only when the engine is running. . Do not leave children or adults who would normally require the support of others alone in your vehicle. Pets should not be left alone either. On hot, sunny days, temperatures in a closed vehicle could quickly become high enough to cause severe or possibly fatal injuries to people or animals. 262 Ventilator Control & Dual 7.0-Inch Display Models s04ag11 1 Defroster button (Refer to “Defrosting” P273.) 2 Defogger button (Refer to “Defogger and Deicer” P246.) 3 Climate control screen (lower display) 4 Driver’s side temperature control button (Refer to “Temperature Control” P271.) 5 Passeger’s side temperature control button (Refer to “Temperature Control” P271.) – CONTINUED – Climate Control Panel 263 4 Climate Control ! Climate control screen s04ag1101 Climate control screen (lower display) : Touch the climate control mode indicator 1 Climate control ON/OFF icon 2 SYNC mode indicator 3 Set temperature indicator (driver’s side) 4 Climate control mode indicator 5 Set temperature indicator (passenger’s side) 6 Dynamic Ventilation mode indicator 7 Dynamic Ventilation ON/ OFF icon 8 Customizable icon* 9 Fan speed control 10 SYNC icon 11 Climate control mode select icon 12 Airflow mode selection screen *: The customizable icon can be changed to the favorite icon. Refer to “General settings” P215. 264 Climate Control Panel & 11.6-Inch Display Models s04ag12 1 Climate control screen 2 Defogger button (Refer to “Defogger and Deicer” P246.) 3 Passenger’s side temperature control button (Refer to “Temperature Control” P271.) 4 Driver’s side temperature control button (Refer to “Temperature Control” P271.) 5 Defroster button (Refer to “Defrosting” P273.) – CONTINUED – Climate Control Panel 265 4 Climate Control ! Climate control screen s04ag1201 Climate control screen : Touch the climate control mode indicator 1 Climate control ON/OFF icon 2 SYNC mode indicator 3 Climate control mode indicator 4 Dynamic Ventilation mode indicator 5 Dynamic Ventilation ON/ OFF icon 6 Customizable icon* 7 Fan speed control 8 Climate control mode select icon 9 Temperature control screen (passenger’s side) 10 SYNC icon 11 Temperature control bar 12 Airflow mode selection screen 13 Temperature control screen (driver’s side) *: The customizable icon can be changed to the favorite icon. Refer to “General settings” P198. 266 Climate Control Panel 4-3. Automatic Climate Control Operation s04ai Climate control screen (dual 7.0-inch display models) Climate control screen (11.6-inch display models) 1 Air inlet selection 2 Air conditioner 3 Airflow mode 4 Fan speed When the auto mode is selected, the following functions are automatically controlled. . Airflow mode . Air inlet selection . Air conditioner operation . Fan speed To activate this mode, perform the following. “AUTO” is displayed on the customizable icon: 1. Touch “AUTO”. 2. Set the preferred temperature. Refer to “Temperature Control” P271. “AUTO” is not displayed on the customizable icon: 1. Touch the climate control mode indicator. 2. Touch “AUTO”. 3. Set the preferred temperature. Refer to “Temperature Control” P271. NOTE . Operate the automatic climate control system when the engine is running. . Even when cooling is not necessary, the air conditioner will automatically turn on if the temperature is set much lower than the current outlet air temperature. Even in this case, the “A/C” indicator light on the climate control screen illuminates. . The air conditioner may not operate in the following cases: – When the cabin temperature is low – When the ambient temperature decreases close to 328F (08C) . The controllable temperature range may vary depending on the regional specifications of the vehicle. – CONTINUED – Automatic Climate Control Operation 267 4 Climate Control . When “AUTO” is displayed, if you operate the fan speed control or the airflow mode, press the defroster button, or turn on MAX A/C mode, the “AUTO” display will turn off. You can then manually control the system as desired using the climate control screen. To change the system back to auto mode, touch “AUTO”. To turn off the climate control system, touch “ON/OFF”. At this time, the air inlet selection mode will differ depending on the auto mode and manual mode. . When the air inlet selection is set to auto mode: Outside air circulation . When the air inlet selection is set to manual mode: No change When the ignition switch is changed to the “OFF”/“LOCK” or “ACC” position from “ON”, the air inlet mode will automatically change to the outside air mode regardless of whether it is the auto mode or manual mode. & Sensors s04ai03 1 Solar sensor 2 Interior air temperature sensor The automatic climate control system employs several sensors. These sensors are delicate. If they are treated incorrectly and become damaged, the system may not be able to control the interior temperature correctly. To avoid damaging the sensors, observe the following precautions: – Do not subject the sensors to impact. – Keep water away from the sensors. – Do not cover the sensors. 268 Automatic Climate Control Operation 4-4. Manual Climate Control s04aj & Airflow Mode Selection s04aj01 Select the preferred airflow mode by the following operation. 1. Touch the climate control mode indicator. 2. Touch the preferred airflow mode. Airflow modes are as follows. Ventilation: Instrument panel outlets Ventilation 2: Instrument panel outlets and foot outlets Bi-level: Instrument panel outlets and the foot outlets Heat: Foot outlets, both side outlets of the instrument panel and some through windshield defroster outlets (A small amount of air flows to the windshield and both side windows to prevent fogging.) – CONTINUED – Manual Climate Control 269 4 Climate Control Heat-def: Windshield defroster outlets, foot outlets and both side outlets of the instrument panel & Dynamic Ventilation s04aj11 Dynamic Ventilation is a system that uses sensors and other technology to judge that someone is sitting in the front passenger seat or rear seat and prioritizes the climate control for these seats when they are occupied. When the push-button ignition switch is turned to the “ON” position, the climate control system automatically selects the Dynamic Ventilation mode according to where the vehicle occupants are sitting. “DRIVER” mode (driver’s seat is only occupied): When the climate control system judges that the driver is the only vehicle occupant, “DRIVER” is displayed on the screen and the system directs the airflow only to the driver. To cancel the airflow “DRIVER” mode, touch the “ ” icon, and “ALL” will be displayed instead of “DRIVER”, and airflow will be directed to all the seats. “FRONT” mode (driver’s seat and front passenger’s seat are occupied): When the climate control system judges that the driver’s and passenger’s seats are occupied, “FRONT” is displayed on the screen and the system directs the airflow to the driver and front passenger. To cancel the airflow “FRONT” mode, touch the “ ” icon, and “ALL” will be displayed instead of “FRONT”, and airflow is directed to all the seats. 270 Manual Climate Control “ALL” mode (rear seats are occupied by passengers): When the climate control system judges that there are passengers occupying the rear seats, “ALL” is displayed on the screen and the system directs the airflow to all vehicle occupants. To cancel the airflow “ALL” mode, touch the “ ” icon and “DRIVER” or “FRONT” is displayed on the screen depending on which passenger’s seats are occupied. NOTE . Depending on the settings of the climate control system or other factors affecting the temperature inside the vehicle, the operation of the Dynamic Ventilation mode for occupants may differ from the operation displayed on the screen. . The climate control system judges that the front passenger’s seat is occupied by detecting such things as the fastening of the seatbelt, opening or closing of the door, and operation of the passenger’s side temperature setting controls. . If “FRONT” is displayed on the screen when the front passenger’s door is opened and then closed and the climate control system subsequently judges that the front passenger’s seat is not occupied, the screen will display “DRIVER” when the vehicle speed reaches approximately 13 mph (20 km/h). . The climate control system judges that there are passengers occupying the rear seats according to the opening and closing of the rear doors. However, touching “ ” icon will turn off the function that judges whether the rear doors are open or closed. To turn the function on again, turn the ignition switch to the “OFF”/“LOCK” position for approximately one hour. . The system may not be able to judge the presence of passengers accurately, in which case this function may not operate properly. & Temperature Control s04aj02 Perform the following operation to regulate the temperature of airflow from the air outlets. Temperature control buttons: Press the temperature control button to the blue side (cool) or the red side (warm). Temperature control screen (11.6-inch display models): 1. Touch the climate control mode indicator. 2. Select the preferred temperature by the following operation. . Touch and move the temperature control bar. . Touch the “ ”/“ ”. . Touch the preferred temperature in the temperature control screen. ! Max A/C mode s04aj0208 For quicker cooling, touch “MAX A/C” on the climate control mode select icon or customizable icon. When the Max A/C mode is on, the following settings will be changed automatically. . The air conditioner will turn on. . The temperature will be set on the lowest. – CONTINUED – Manual Climate Control 271 4 Climate Control . The fan speed will be set on the maximum speed. . The air inlet will be set to the recirculation mode. . The airflow mode setting will be set to the ventilation mode. To turn off the Max A/C mode and return to the previous setting, touch “MAX A/C” again. ! SYNC mode s04aj0207 When the SYNC mode is turned on, both the driver’s and passenger’s side temperatures are synchronized using the driver’s side temperature control button and temperature control screen. . If “SYNC” is displayed on the customizable icon, touch “SYNC” to turn the SYNC mode on or off. . If a customizable icon other than “SYNC” is displayed, touch the climate control mode indicator. Then touch “SYNC” to turn the SYNC mode on or off. The SYNC mode indicator will turn white. Touch “SYNC” again, press the passenger’s side temperature control button or operate the passenger’s side temperature control bar to cancel the SYNC mode. The SYNC mode indicator will be grayed out. In this case, temperature control on the driver’s side and passenger’s side will be separated. The temperature will be controlled individually using the driver’s and passenger’s temperature control button and the driver’s and passenger’s temperature control bar. & Fan Speed Control s04aj03 Select the preferred fan speed by touching or on the climate control screen. & Air Conditioner Control s04aj04 The air conditioner operates only when the engine is running. Perform the following operation while the fan is in operation to turn on the air conditioner. . If “A/C” is displayed on the customizable icon, touch “A/C”. When the air conditioner is on, the “A/C” indicator illuminates. And A/C icon will be displayed on the climate control mode indicator. . If a customizable icon other than “A/C” is displayed, touch the climate control mode indicator. Then touch “A/C” on the climate control mode select icon. When the air conditioner is on, “A/C” indicator illuminates. And A/C icon will be displayed on the climate control mode indicator. To turn off the air conditioner, touch “A/C” again. The indicator light will turn off or it will be grayed out. NOTE For efficient defogging or dehumidifying in cold weather, turn on the air conditioner. However, if the ambient temperature decreases to approximately 328F (08C), the air conditioner and dehumidification system may not work properly. & Air Inlet Selection s04aj05 Select the air inlet by touching the air inlet selection icon. Recirculation mode: Interior air is recirculated inside the vehicle. This mode is used for the following cases. . When driving on a dusty road . When you want cooling performance to increase (for example, in particularly hot weather) Perform the following operation to select this mode. . is displayed on the customizable icon: (1) Touch . 272 Manual Climate Control . is not displayed on the customizable icon: (1) Touch the climate control mode indicator. (2) Touch on the climate control mode select icon. will be displayed on the climate control mode indicator. Outside air circulation mode: Outside air is drawn into the passenger compartment. This mode is used for the following cases. . When the road is no longer dusty . When the interior has cooled to a comfortable temperature Perform the same operation as the recirculation mode to change the mode. will be displayed on the climate control mode indicator. WARNING Continued operation in the recirculation mode may fog up the windows. Switch to the outside air circulation mode as soon as the outside dusty condition clears. NOTE When outside air circulation is selected, the system may automatically adjust the air inlet setting depending on such factors as the temperature setting, the temperature inside the vehicle, or conditions outside the vehicle. & To Turn Off the Climate Control System s04aj07 To turn off the climate control system, touch the climate control ON/OFF icon. 4-5. Defrosting s04ah To defrost or dehumidify the windshield and front door windows, perform the following procedures. . To select the “ ” mode, press the defroster button. . To select the “ ” mode, touch “ ” on the airflow mode selection screen. NOTE . When the “ ” or “ ” mode is selected, the air conditioner operates automatically regardless of the position of the air conditioner icon to defrost the windshield more quickly. However, the indicator on the air conditioner icon may not illuminate. At the same time, the air inlet selec- – CONTINUED – Defrosting 273 4 Climate Control tion is automatically set to the outside air circulation mode. . After defrosting the windshield by pressing the defroster button “ ”, pressing the button again returns the system to the setting that had been selected before the defroster was activated. 4-6. Operating Tips for Heater and Air Conditioner s04ad & Cleaning Ventilator Grille s04ad01 1 Front ventilator inlet grille 2 Condenser Always keep the front ventilator inlet grille free of snow, leaves, or other obstructions to ensure efficient heating and defrosting. Since the condenser is located in front of the radiator, this area should be kept clean because cooling performance is impaired by any accumulation of insects and leaves on the condenser. & Efficient Cooling after Parking in Direct Sunlight s04ad02 After parking in direct sunlight, drive with the windows open for a few minutes to allow outside air to circulate into the heated interior. This results in quicker cooling by the air conditioner. Keep the windows closed during the operation of the air conditioner for maximum cooling efficiency. & Lubrication Oil Circulation in the Refrigerant Circuit s04ad03 Operate the air conditioner compressor at a low engine speed (at idle or low driving speeds) a few minutes each month during the off-season to circulate its oil. & Checking Air Conditioning System before Summer Season s04ad04 Check the air conditioner unit for refrigerant leaks, hose conditions, and proper operation each spring. Have the air conditioning system checked by your SUBARU dealer. 274 Operating Tips for Heater and Air Conditioner & Cooling and Dehumidifying in High Humidity and Low Temperature Weather Condition s04ad05 Under certain weather conditions (high relative humidity, low temperatures, etc.) a small amount of water vapor emission from the air outlets may be noticed. This condition is normal and does not indicate any problem with the air conditioning system. & Air Conditioner Compressor Shut-Off When Engine Is Heavily Loaded s04ad06 To improve acceleration and gas mileage, the air conditioner compressor is designed to temporarily shut off during air conditioner operation whenever the accelerator is fully depressed such as during rapid acceleration or when driving on a steep upgrade. & Refrigerant for Your Climate Control System s04ad07 1 Air conditioner label Your air conditioner uses ozone friendly refrigerant R-1234yf (HFO-1234yf). Before adding, changing or checking the refrigerant, check the air conditioner label in the location shown in the illustration to confirm which type of refrigerant is used in your vehicle. Consult your SUBARU dealer for service. Repairs needed as a result of using the wrong refrigerant are not covered under warranty. 4-7. Air Filtration System s04ae Your vehicle’s air conditioning system is equipped with an air filtration system. Replace the cabin air filter according to the replacement schedule found in the “Warranty and Maintenance Booklet”. This schedule should be followed to maintain the filter’s dust collection ability. Under extremely dusty conditions, the filter should be replaced more frequently. Have your filter checked or replaced by your SUBARU dealer. For replacement, use only a genuine SUBARU air filter kit. CAUTION Contact your SUBARU dealer if the following occurs, even if it is not yet time to change the filter. . Reduction of the airflow through the vents. . Windshield gets easily fogged or misted. NOTE The filter can influence the air conditioning, heating and defroster performance if not properly maintained. – CONTINUED – Air Filtration System 275 4 Climate Control & Replacing the Cabin Air Filter s04ae01 1. Remove the glove box. (1) Open the glove box. (2) Remove the damper shaft from the glove box. 1 Stoppers (3) Push both sides of the glove box inward to unlock the stoppers and then pull down the glove box as far as it will go. (4) Pull out the glove box horizontally and remove the hinge portion. When doing this, be careful not to damage the hinge. 2. Remove the cabin air filter according to the following procedure in order to prevent dust on the air cleaner from falling to the inside of its housing. (1) Pinch both tabs and remove the filter cover. (2) Gently tilt down the end of the filter and slowly pull it out 0.4 in (1 cm). (3) Slowly pull out the rest of the filter. 276 Air Filtration System 3. Replace the cabin air filter with a new one and then reinstall the cover. CAUTION The arrow mark on the filter must point UP. 4. Reinstall the glove box, and connect the damper shaft. 5. Close the glove box. Air Filtration System 277 4 Climate Control———————— — — — — — — — — s05 5-1. Antenna . 280 Roof Antenna . 280 5-2. Audio Set .280 Audio 5 Audio 5-1. Antenna s05aa & Roof Antenna s05aa03 The satellite radio antenna and telematics antenna (if equipped) are installed in the center of the roof at the rear. 5-2. Audio Set s05ac If your vehicle is equipped with a genuine SUBARU navigation system or audio system, refer to the separate navigation/ audio Owner’s Manual for details. 280 Antenna s06 6-1. Interior Light . 282 Map Lights . 282 Dome Light. 282 Cargo Area Light 283 OFF Delay Timer. 283 6-2. Sun Visors. 283 Sun Visor Extension Plate. 284 Vanity Mirror with Light (If Equipped) 284 6-3. Storage Compartment 285 Glove Box 285 Center Tray. 285 Center Console. 286 Center Console Tray . 286 Storage Compartment. 286 6-4. Cup Holder 287 Front Passenger’s Cup Holder 287 Rear Passenger’s Cup Holder (If Equipped). 287 6-5. Bottle Holders . 288 6-6. Accessory Power Outlets .288 6-7. USB Power Supply289 How to Use the USB Power Supply 290 6-8. Wireless Charger (If Equipped) 291 How to Use the Wireless Charger . 292 Certification for the Wireless Charger . 295 6-9. Ashtray (Dealer Option) 296 6-10. Assist Grip .297 6-11. Coat Hook 298 6-12. Floor Mat 298 6-13. Shopping Bag Hook 299 6-14. Cargo Area Cover (If Equipped).300 Using the Cover . 300 To Remove the Cover Housing . 300 Stowage of the Cargo Area Cover. 301 To Install the Cover Housing 301 6-15. Cargo Tie-Down Hooks (If Equipped) 302 6-16. Under-Floor Storage Compartment302 Interior Equipment 6 Interior Equipment 6-1. Interior Light s06aa CAUTION When leaving your vehicle, make sure the lights are turned off to avoid battery discharge. & Map Lights s06aa06 ! Map light switches s06aa0606 To turn on the map light, press the lens. To turn it off, press the lens again. CAUTION Do not keep watching the light source because they use LEDs. Doing so could damage your eyes. ! Door interlock switch s06aa0602 1 Door interlock switch The door interlock switch has the following positions. OFF: The map lights do not illuminate automatically in conjunction with a door opening. However, the lights can be turned on manually by pressing the map light lens. DOOR: The map lights illuminate automatically when any of the doors (other than the rear gate) is opened even while the map light is off. Several seconds after all the doors (other than the rear gate) are closed, the map lights gradually turn off. For details, refer to “OFF Delay Timer” P283. & Dome Light s06aa01 1 ON 2 DOOR 3 OFF The dome light switch has the following positions. ON: The light remains on continuously. OFF: The light remains off. DOOR: The dome light illuminates automatically in the following cases. . Any of the doors or the rear gate is opened. . The doors or the rear gate are unlocked using the keyless access function (if equipped). Refer to “Locking and Unlocking with “Keyless Access” Entry 282 Interior Light Function” P112. . The doors or the rear gate are unlocked using the remote keyless entry system. Refer to “Remote Keyless Entry System” P124. . The ignition switch is turned from the “ACC” position to the “LOCK”/“OFF” position. & Cargo Area Light s06aa02 1 DOOR 2 OFF DOOR: The light illuminates when the rear gate is opened. The light remains illuminated for several seconds and gradually turns off after the rear gate is closed. OFF: The light remains off. & OFF Delay Timer s06aa07 The following lights have an automatic illumination function. . Dome light . Map lights . Cargo area light When the door interlock switch is set to the “DOOR” position, the light will automatically turn on and off depending on the locking and unlocking of the doors, the opening and closing of the doors, as well as the position of the ignition switch. NOTE The setting for the period of time in which the lights remain on (OFF delay timer) can be changed by operating the center information display. For details, refer to “Car settings” P203 (11.6- inch display models) or “Vehicle setting icons” P221 (dual 7.0-inch display models). Also, the setting of the lights remain on (OFF delay timer) can be changed by your SUBARU dealer. Contact your SUBARU dealer for details. 6-2. Sun Visors s06ac To block out glare, swing down the visors. To use the sun visor at a side window, swing it down and move it sideways. – CONTINUED – Sun Visors 283 6 Interior Equipment & Sun Visor Extension Plate s06ac01 With the sun visor positioned over the side window, you can use the sun visor extension plate to prevent glare through the gap between the sun visor and center pillar. To use the extension plate, pull it toward the rear of the vehicle. When you have finished using it, stow it by pushing it toward the front of the vehicle. CAUTION Do not pull out the extension plate with the sun visor positioned over the windshield. The extension plate would obstruct your view of the rearview mirror. & Vanity Mirror with Light (If Equipped) s06ac02 CAUTION Keep the vanity mirror cover closed while the car is being driven to avoid being blinded by glare. To use the vanity mirror, swing down the sun visor and open the vanity mirror cover. The lights beside the vanity mirror illuminate when the mirror cover is opened. NOTE Use of the vanity mirror light for a long period of time while the engine is not running can cause battery discharge. 284 Sun Visors 6-3. Storage Compartment s06ad CAUTION . Always keep the storage compartment closed while driving to reduce the risk of injury in the event of sudden stops or an accident. . Do not store the following items in the storage compartment. Otherwise, it may cause a fire or accident. – Spray cans, containers with flammable or corrosive liquids or any other dangerous items. – Plastic or other heat-vulnerable or flammable articles such as a lighter. & Glove Box s06ad01 To open the glove box, pull the handle. To close it, push the lid firmly upward. NOTE When the instrument panel illumination is on, the light that illuminates the glove box (if equipped) is on. Refer to “Headlights” P232. & Center Tray s06ad13 The center tray is located below the center of the instrument panel. WARNING For models with the wireless charger: When the wireless charger is turned on, do not place coins, keys, clips, or other metal objects on the center tray. For details, refer to “Wireless Charger” P291. CAUTION Do not use the center tray to hold objects that could roll out of the tray. – CONTINUED – Storage Compartment 285 6 Interior Equipment . You may get injured if objects are thrown out of the tray while the vehicle is in motion. NOTE When the instrument panel illumination is on, the light that illuminates the center tray is on. Refer to “Headlights” P232. & Center Console s06ad02 The center console box provides a storage space. To open the lid, pull up the lock release lever. & Center Console Tray s06ad18 The center console tray is located on the front side of the center console. & Storage Compartment s06ad15 Apron trim side pockets are located on both sides of the cargo room. 286 Storage Compartment 6-4. Cup Holder s06ae CAUTION Take care to avoid spills. Beverages, if hot, might burn you and/or your passengers. Spilled beverages may also damage upholstery, carpets or audio equipment. & Front Passenger’s Cup Holder s06ae01 CAUTION . Do not pick up a cup from the cup holder or put a cup in the holder while you are driving, as this may distract you and lead to an accident. . Take care not to spill a beverage on the select lever or any switch(es) in the adjacent area. If the beverage is spilled, it may cause a malfunction of the select lever and/or switch(es). 1 Spacer The dual cup holder is built into the center console. Place a spacer in it before putting in a small cup or can. & Rear Passenger’s Cup Holder (If Equipped) s06ae02 A dual cup holder is built into the armrest. CAUTION When a cup containing a beverage is in the cup holder, do not fold down or recline any seat. Otherwise, the beverage could spill while driving and, if the beverage is hot, it could burn you and/or your passengers. Cup Holder 287 6 Interior Equipment 6-5. Bottle Holders s06av CAUTION . Do not pick up a bottle from the bottle holder or put a bottle in the holder while you are driving, as this may distract you and lead to an accident. . When placing a beverage in a bottle holder, make sure it is capped. Otherwise, the beverage could spill when opening/closing the door or while driving and, if the beverage is hot, it could burn you and/or your passengers. The bottle holder equipped on each door trim can be used to hold beverage bottles and other items. 6-6. Accessory Power Outlets s06af Power outlet An accessory power outlet is provided in the center console. Electrical power (12 V DC) from the battery is available at any of the outlets when the ignition switch is in either the “ACC” or “ON” position. You can use an in-vehicle electrical appliance by connecting it to an outlet. The maximum power rating of an appliance that can be connected is 120 W. Do not use an appliance which exceeds the indicated wattage for each outlet. When using appliances connected to two or more outlets simultaneously, the total power consumed by them must not exceed 120 W. 288 Bottle Holders CAUTION . Do not attempt to use a cigarette lighter in the accessory power outlet. . Do not place any foreign objects, especially metal ones such as coins or aluminum foil, into the accessory power outlet. That could cause a short circuit. Always put the cap on the accessory power outlet when it is not in use. . Use only electrical appliances which are designed for 12 V DC. The maximum power rating of an appliance that can be connected is 120 W. Do not use an appliance which exceeds the indicated wattage for each outlet. When using appliances connected to two or more outlets simultaneously, the total power consumed by them must not exceed 120 W. Overloading the accessory power outlet can cause a short circuit. Do not use double adapters or more than one electrical appliance. . If the plug on your electric appliance is either too loose or too tight for the accessory power outlet, this can result in a poor contact or cause the plug to get stuck. Only use plugs that fit properly. . Use of an electric appliance in the accessory power outlet for a long period of time while the engine is not running can cause battery discharge. . Before driving your vehicle, make sure that the plug and the cord on your electrical appliance will not interfere with your shifting gears and operating the accelerator and brake pedals. If they do, do not use the electrical appliance while driving. 6-7. USB Power Supply s06ay CAUTION . The specification of a USB terminal that can be used is the Type- A and Type-C. If a different specification of terminal is connected, power supply or charging may not be possible, or the device may malfunction. . There is a risk that a connected device may malfunction or data may be damaged. The connection of a device shall be performed at your responsibility. . To avoid an electric shock or a malfunction, observe the following precautions. – Do not connect a USB hub. – Do not insert any metal or other foreign object into the USB terminal. – Do not spill water or other liquid on the USB terminal. . Be careful not to pull the connected cable. Doing so could break the USB terminal and the connected device. – CONTINUED – USB Power Supply 289 6 Interior Equipment . If a device is connected for a long time when the engine is not running, doing so may cause the risk of a discharged battery. Even when the engine is running, we recommend that you do not connect a device for an unnecessarily long time. . Do not connect a malfunctioning device. Doing so may cause the risk of smoke and fire. NOTE . The rated voltage of each USB terminal is 5 V. For details about the maximum rated power, refer to “How to Use the USB Power Supply” P290. Before connecting a device, be sure to read the instruction manual of the device and check whether or not this specification of the output is supported by the device. If a device that requires power exceeding the maximum rating is connected, power supply or charging may not be possible. Even if charging could be completed, the time required for charging may be longer than when the genuine charger for that device is used. . Depending on the device, charging may be possible only when a special cable is used. In this case, be sure to connect the device using the special cable. . When a device that communicates with a PC is connected, power supply or charging may not be possible. . When connect a device for charging, disconnect the device promptly after charging is completed. & How to Use the USB Power Supply s06ay01 Type-A and Type-C Type-A Front seat USB power supply (an audio device can be connected and used) – USB Type-A: DC 5 V/2.4 A* – USB Type-C: DC 5 V/3.0 A* *: The available electrical power of the two USB terminals is a maximum of 5.4 A. 290 USB Power Supply Console USB power supply (charge only) (if equipped) – USB Type-A: DC 5 V/2.4 A* – USB Type-C: DC 5 V/3.0 A* *: The available electrical power of the two USB terminals is a maximum of 5.4 A. Use the USB terminal to use or charge an electronic device. When the ignition switch is in the “ACC” or “ON” position, the power can be supplied to the electronic device. 6-8. Wireless Charger (If Equipped) s06bh Wireless charger To charge a cell phone, smartphone or a similar mobile device compatible with the Qi wireless charging standard, place the device in the charging area located below the center information display. The “Qi” logo is a trademark of the Wireless Power Consortium. 1 Indicator light 2 Power switch 3 Charging area NOTE Mobile devices and wireless chargers contain coils for charging. These coils allow the wireless charging system to charge a mobile device with a high level of charging efficiency. When your device is in the charging area, the wireless charger detects it and aligns an integrated moving coil with the coil in your device for charging. If vehicle vibration causes the two coils to become misaligned while the vehicle is in motion, the moving coil of the wireless charger automatically repositions itself and resumes charging. – CONTINUED – Wireless Charger 291 6 Interior Equipment However, if the mobile device moves out of the charging area, charging will automatically stop. & How to Use the Wireless Charger s06bh01 1. The wireless charger operate when the ignition switch is in the “ON” or “ACC” position. 2. Press the power switch once to turn on the wireless charger. When the wireless charger is ON, the indicator light illuminates in green, and when the wireless charger is OFF, the indicator light turns off. 3. Place the mobile device so that the screen or keypad is facing up (the charging surface is facing downward). The center of the device must also be aligned with the center of the charging area. Depending on the mobile device, the charging coil may not be in the center of the device. In such cases, place the mobile device so that its charging coil is in the center of the charging area. The indicator light illuminates in orange during charging. If the indicator light does not illuminate in orange and device charging does not occur, move the device to the center of the charging area. 4. The indicator light illuminates in green when charging is complete. NOTE The power status of the wireless charger is stored even when the ignition switch is turned to the “OFF” position. ! How to use the quick charge s06bh0101 The following types of mobile devices support quick charging as opposed to normal charging (5 W). . Mobile devices compliant with WPC* Ver. 1.2.4 and compatible with fast chargers can be charged up to 10 W. . iPhone 8 (or later) with an iOS version compliant with WPC* Ver. 1.2.4 and compatible with 7.5 W charging. * WPC: Wireless Power Consortium 1. Press the power switch three times to change to the quick-charging mode while your mobile device is charging in normal mode. The indicator light will change from orange to alternating green and orange when the wireless charger switches to the quick-charging mode. 2. When charging is complete, the quickcharging mode ends. To restart quickcharging, switch to the quick-charging mode again. 292 Wireless Charger ! Indicator light patterns s06bh0102 Indicator light Interpretation Off The wireless charger is turned off Green (illuminated) Standby (ready for charging)* 1 Charging is complete*2 Orange (illuminated) A mobile device is in the charging area (a mobile device is being detected) Charging Green and orange illuminate alternately Quick charging is in progress *1: No power is output for charging when the wireless charger is in standby mode. Even if metal objects are placed on the charging tray in this state, they will not overheat. *2: For some mobile devices, the indicator light remains orange even after charging is complete. ! List of warnings s06bh0103 Indicator light Possible causes Solution Flashes orange once per second A communication error occurred between the wireless charger and the access key fob. If the engine is running, stop the engine and restart it. If the ignition switch is in “ACC”, start the engine once. Repeatedly flashes orange three times Metallic foreign object detected. A foreign object is detected between the mobile device and the charging area. The mobile device is out of alignment: The overheat prevention function of the charging coils was triggered because the mobile device’s charging coils were out of alignment with the charging area. Remove any foreign objects between the mobile device and the charging area. Remove the mobile device from the charging area, check that the activation indicator light is illuminating in green again, and place the device in the center of the charging area. If there is a case or cover on your mobile device, be sure to remove it. Indicator light Possible causes Solution Repeatedly flashes orange four times The temperature inside the wireless charger has increased. Remove the mobile device from the charging area temporarily to stop charging. When the temperature of the heavy electrical equipment cools down, start charging the device again. NOTE If you hear noise on the AM radio while your device is charging, you may be able to reduce the noise by changing the charging frequency. To change the charging frequency, press and hold the power switch to turn on the system. After a certain amount of time, the indicator light will flash orange twice to indicate the frequency switch. WARNING . For safety reasons, drivers must not operate a charging mobile device while driving. – CONTINUED – Wireless Charger 293 6 Interior Equipment . Do not charge small devices such as cordless headphones or lightweight cell phones while driving. Due to their light weight, these devices may be thrown from the charging tray resulting in an accident. . The wireless power receiver can affect some implanted or other electrical medical devices. If you use a cardiac pacemaker, ventricular pacing pulse generator, cardioverter-defibrillator, or a similar device, consult with your physician before using the wireless charger. . Before charging your device, make sure that there is no metal between the charging area and the mobile device. Metal objects may generate heat and cause burns when placed in the charging area. . Do not apply strong force or impact to the charging area. . Do not affix aluminum stickers to or place other metal objects in the charging area. Also, do not charge a mobile device that has aluminum stickers or other metal objects attached to it that may come in contact with the charging area. Metal objects may generate heat and cause burns when placed in the charging area. . Do not disassemble, modify, or remove the wireless charger. . Do not place magnetized objects in or near the charging area. . During charging, do not cover your device with a cloth, etc. . Do not charge your device in dusty conditions. . Make sure that no foreign objects or liquids are placed or spilled in the wireless charger. CAUTION . Do not place the access key fob near the wireless charger. . When your device is charging, keep any magnetic cards such as credit cards and precision devices such as watches away from the charging area. They may be damaged. To prevent discharging the vehicle battery, do not use the wireless charger for long periods of time when the engine is stopped. . If the access key fob cannot be detected in the cabin, the battery cannot be charged. In addition, charging may be temporarily suspended when the remote keyless entry system is in operation, such as when opening and closing doors. . Remove the device case to charge the mobile battery. . Do not leave objects in the trays unattended for a long period of time. The paint on the trays may deteriorate depending on the type of device case or accessory. . If your mobile device does not charge even after you place it in the charging area, remove the device case and any accessories. . When the OS version of a mobile device is updated, the charging specifications may change significantly. Also, if the OS versions compatible with WPC change, the quick charging function may become unavailable. For details, check the website of your mobile device manufacturer. . To prevent discharging the vehicle battery, do not use the wireless charger for long periods of 294 Wireless Charger time when the engine is stopped. NOTE . This function is not available for devices larger than the charger tray. . The wireless charger and mobile device will emit heat during charging, but this is not a malfunction. . When your mobile device emits heat during charging, the mobile device’s protective function may cancel charging. . A beep will sound when the power switch of the wireless charger is pressed to turn the power ON or when a mobile device is being detected. This is not a malfunction. . The fan may activate when the temperature rises, but this is not a malfunction. . Qi standard wireless charger can be used on compatible devices. However, not all Qi standard devices and compatibility are guaranteed. & Certification for the Wireless Charger s06bh02 . The U.S. and other FCC compliant countries FCC ID: ACJ932AF2201 CAUTION FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a wireless power charger, pursuant to part 18 of the FCC Rules. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio communications, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment should be installed and operated keeping the radiator at least 20 cm or more away from person’s body. NOTE This device complies with part 15 and part 18 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause – CONTINUED – Wireless Charger 295 6 Interior Equipment undesired operation. . Canada-spec. models FCC ID: ACJ932AF2201 CAUTION FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a wireless power charger, pursuant to part 18 of the FCC Rules. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio communications, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment should be installed and operated keeping the radiator at least 20 cm or more away from person’s body. 6-9. Ashtray (Dealer Option) s06ag CAUTION . Do not use ashtrays as waste receptacles or leave a lighted cigarette in an ashtray. This could cause a fire. . Always extinguish matches and cigarettes before putting them into the ashtray, and then close the ashtray securely. If you keep the ashtray open, the fire of the cigarette may spread to another cigarette butt and start a fire. . Do not put flammable material in the ashtray. . Do not leave a lot of cigarette butts in the ashtray. NOTE Particles of ash and tobacco will accumulate around the hinges of the ashtray’s inner lid. Clean them off using a toothbrush or a similar narrow-ended implement. 296 Ashtray (Dealer Option) The portable ashtray can be installed in each cup holder or bottle holder. For the locations of the cup holders, refer to “Cup Holder” P287. For the locations of the bottle holders, refer to “Bottle Holders” P288. When using the ashtray, open the lid of the ashtray. Fully close the lid after using the ashtray to help reduce residual smoke. 6-10. Assist Grip s06bd 1 Assist grip The assist grip is to be held to support the body of the passengers when they are in the seat and the vehicle is moving. WARNING Do not hold the assist grip when getting up from the seat. Holding and pulling the assist grip in the wrong way could break the grip and possibly cause injury. CAUTION Do not attach heavy objects to the assist grip. Doing so could break it and damage the object. Assist Grip 297 6 Interior Equipment 6-11. Coat Hook s06ah WARNING Obey the following instructions. . Do not hang coat hangers or other hard or pointed objects on the coat hooks. Hang clothing directly on the coat hooks without using hangers. . Before hanging clothing on the coat hooks, make sure there are no pointed objects in the pockets. If these instructions are ignored, the following may occur in sudden stops or in a collision. . Serious injuries by the items thrown through the cabin. . Incorrect SRS curtain airbag deployment. CAUTION Never hang anything on the coat hook that might obstruct the driver’s view or that could cause injury in sudden stops or in a collision. And do not hang items on the coat hook that weigh 11 lbs (5 kg) or more. The coat hook is attached to each rear passenger’s assist grip. 6-12. Floor Mat s06aj CAUTION If the floor mat slips forward and interferes with the movement of the pedals during driving, it could cause an accident. Observe the following precautions to prevent the floor mat from slipping forward. . Be sure to use a genuine SUBARU floor mat designed with grommets in the correct locations. . Make sure that the driver’s floor mat is placed back in its proper location and is correctly secured on its retaining pins. 298 Coat Hook . Do not use more than one floor mat. 1. Insert the retaining hooks (clips) into the floor mat eyelets. A: Align the triangle marks ( ) when installing the floor mats. 2. Turn the upper knob of each retaining hook (clip) to secure the floor mats in place. 6-13. Shopping Bag Hook s06ai CAUTION Do not hang items on the shopping bag hook that weigh 6 lbs (3 kg) or more. A shopping bag hook is attached to each side of the cargo area. Shopping Bag Hook 299 6 Interior Equipment 6-14. Cargo Area Cover (If Equipped) s06ak The cargo area cover is provided for covering the cargo area and to protect its contents from direct sunlight. This cover is detachable to make room for additional cargo. & Using the Cover s06ak01 To extend the cover, pull the cargo area cover using the center hole, then insert its hooks into the catches as shown. To rewind it, unhook it from the catches and it will rewind automatically. You should hold on to the cover and guide it back into the cover housing while it is rewinding. WARNING Do not place anything on the extended cover. Putting excessive weight on the extended cover can break it and an object on the cover could tumble forward in the event of a sudden stop or collision. This could cause serious injury. CAUTION Be careful not to scratch the rear gate stays while extending and rewinding the cover. Scratches on the stays could cause leakage of gas from the stays, which may result in their inability to hold the rear gate open. & To Remove the Cover Housing s06ak02 1. Rewind the cover. 2. Push the cover housing to the right side and shorten it. 3. Take it off the retainer. 300 Cargo Area Cover & Stowage of the Cargo Area Cover s06ak04 The cargo area cover can be stowed under the cargo floor as follows. 1. Raise and fold the rear end of the cargo floor board. 2. Stow the cover housing in the cargo area end. 3. Put the cargo floor board back. & To Install the Cover Housing s06ak05 The right end of the cargo area cover is a sliding structure. 1. Insert the right end of the cover into the recessed portion with the arrow mark facing upward. 2. Hold the cover housing securely and insert the left end of the cover into the recessed portion. Cargo Area Cover 301 6 Interior Equipment 6-15. Cargo Tie-Down Hooks (If Equipped) s06am The cargo area is equipped with four tiedown hooks so that cargo can be secured with a cargo net or ropes. When using the front tie-down hooks, turn them down out of the storing recesses. CAUTION The cargo tie-down hooks are designed only for securing light cargo. Never try to secure cargo that exceeds the capacity of the hooks. The maximum load capacity is 22 lbs (10 kg) per hook. 6-16. Under-Floor Storage Compartment s06an The subfloor storage compartment is located under the floor of the cargo area and can be used to store small items. To open the lid, pull the strap up. CAUTION . Always keep the lid of the subfloor storage compartment closed while driving to reduce the risk of injury in the event of sudden stop or an accident. . Do not store spray cans, containers with flammable or corrosive liquids or any other dangerous items in the subfloor storage compartment. 302 Cargo Tie-Down Hooks———————————————— — — — — — — — — — — — — — — — — s07 7-1. Fuel 307 Fuel Requirements 307 Fuel Filler Lid and Cap 308 7-2. State Emission Testing (U.S. Only) . 311 7-3. Preparing to Drive 312 7-4. Starting and Stopping the Engine (Models without Push-Button Ignition Switch) . 313 General Precautions When Starting/Stopping Engine 313 Starting Engine. 314 Stopping the Engine . 315 Steering Lock . 315 7-5. Starting and Stopping Engine (Models with Push-Button Start System) 315 Safety Precautions 315 Operating Range for Push-Button Start System. 315 Starting Engine. 315 Stopping Engine . 317 When Access Key Fob Does Not Operate Properly . 318 Steering Lock . 318 7-6. Remote Engine Start System (Dealer Option) 319 Remote Engine Starter Transceiver (Fob) 319 Alternate Operation Method for Models with “Keyless Access with Push-Button Start System” . 322 Entering the Vehicle While It Is Running via Remote Start (Models without “Keyless Access with Push-Button Start System”). 322 Entering the Vehicle While It Is Running via Remote Start (Models with “Keyless Access with Push-Button Start System”) 323 Entering the Vehicle Following Remote Engine Start Shutdown 323 Pre-heating or Pre-cooling the Interior of the Vehicle . 323 Remote Transmitter Program (Remote Engine Starter Transceiver) 323 System Maintenance 324 Certification for Remote Engine Starter 325 7-7. Continuously Variable Transmission .326 Continuously Variable Transmission Features. 326 Select Lever. 327 Shift Lock Function 328 Selection of Manual Mode (If Equipped) 330 Selection of “L” (If Equipped). 331 Driving Tips . 331 7-8. SI-DRIVE.332 Intelligent (I) Mode . 332 Sport (S) Mode. 332 SI-DRIVE Switch. 332 7-9. Power Steering 333 7-10. Braking.334 Braking Tips 334 Brake System. 334 Disc Brake Pad Wear Warning Indicators 335 7-11. ABS (Anti-Lock Brake System) 336 ABS Self-Check 336 ABS Warning Light. 336 Starting and Operating 7 Starting and Operating 7-12. Electronic Brake Force Distribution (EBD) System . 336 EBD System Malfunctions. 337 7-13. Vehicle Dynamics Control System 337 Vehicle Dynamics Control System Monitor 339 To Turn On/Off the Vehicle Dynamics Control System . 339 7-14. X-MODE . 340 To Activate/Deactivate X-MODE. 341 Hill Descent Control Function . 342 7-15. Tire Pressure Monitoring System (TPMS) (U.S.-Spec. Models) 343 Certification for Tire Pressure Monitoring System . 344 TPMS Screen 345 7-16. Parking Your Vehicle 345 Electronic Parking Brake 345 Parking Tips . 351 7-17. Hill Start Assist System . 352 7-18. Auto Start Stop System . 353 System Operation . 353 Displaying the Auto Start Stop System Status. 357 System Warning . 357 7-19. Rear View Camera 358 How to Use the Rear View Camera 359 Viewing Range on the Screen . 359 Help Lines 360 7-20. BSD/RCTA (If Equipped). 362 System Features. 363 System Operation 365 BSD/RCTA Approach Indicator Light/Warning Buzzer . 366 BSD/RCTA OFF Indicator 368 BSD/RCTA Warning Indicator 368 To Turn On/Off the BSD/RCTA 369 Certification for the BSD/RCTA . 369 Handling of Radar Sensors. 370 7-21. Reverse Automatic Braking (RAB) System (If Equipped) 371 Reverse Automatic Braking (RAB) System Overview 372 Operating Conditions . 374 Sonar Audible Alarm Function 377 Automatic Braking Function Operation . 378 Canceling the Reverse Automatic Braking (RAB) System Operation 380 Reverse Automatic Braking (RAB) System ON/OFF Setting 380 RAB Warning Indicator. 381 Handling of the Sonar Sensors. 381 7-22. Driver Monitoring System (If Equipped) 382 User Recognition Function . 386 Inattentive/Drowsy Driving Warning 388 Driver Monitoring System Indicator/Warning . 389 Using the Driver Monitoring System . 390 Registering and Deleting a User . 391 Driver Monitoring System ON/OFF Settings 392 How to Get the Source Code That Uses Open Source Software. 392 Starting and Operating 7-1. Fuel s07aa CAUTION . Use of a fuel which is low in quality or use of an inappropriate fuel additive may cause damage to the engine and/or fuel system. . Some gas stations, particularly those in high altitude areas, offer fuels posted as regular octane gasoline with an octane rating below 87 AKI (90 RON). Use of those fuels are not recommended. & Fuel Requirements s07aa01 The engine is designed to operate using unleaded gasoline with an octane rating of 87 AKI (90 RON) or higher. ! Fuel octane rating s07aa0103 Using a gasoline with a lower octane rating can cause persistent and heavy knocking, which can damage the engine. Do not be concerned if your vehicle sometimes knocks lightly when you drive up a hill or when you accelerate. Contact your SUBARU dealer if you use a fuel with the specified octane rating and your vehicle knocks heavily or persistently. ! RON s07aa010301 This octane rating is the Research Octane Number. ! AKI s07aa010302 This octane rating is the average of the Research Octane and Motor Octane numbers and is commonly referred to as the Anti Knock Index (AKI). ! Unleaded gasoline s07aa0104 The neck of the fuel filler pipe is designed to accept only an unleaded gasoline filler nozzle. Under no circumstances should leaded gasoline be used because it will damage the emission control system and may impair driveability and fuel economy. ! Reformulated gasoline s07aa0128 SUBARU supports the use of reformulated gasoline when available. Reformulated gasoline has been blended to burn more cleanly and reduce vehicle emissions. ! MMT s07aa0106 Some gasoline contains an octane-enhancing additive called MMT (Methylcyclopentadienyl Manganese Tricarbonyl). If you use such fuels, your emission control system performance may deteriorate and the CHECK ENGINE warning light/malfunction indicator light may turn on. If this happens, return to your authorized SUBARU Dealer for service. If it is determined that the condition is caused by the type of fuel used, repairs may not be covered by your warranty. ! Gasoline for cleaner air s07aa0107 Your use of gasoline with detergent additives will help prevent deposits from forming in your engine and fuel system. This helps keep your engine in tune and your emission control system working properly, and is a way of doing your part for cleaner air. If you continuously use a high quality fuel with the proper detergent and other additives, you should never need to add any fuel system cleaning agents to your fuel tank. Many gasolines are now blended with materials called oxygenates. Use of these fuels can also help keep the air cleaner. Oxygenated blend fuels, such as ethanol (ethyl or grain alcohol) may be used in your vehicle, but should contain no more than 15% ethanol for the proper operation of your SUBARU. Do not use any gasoline that contains more than 15% ethanol, including from any pump labeled E30, E50 or E85 (which are only some examples of fuel containing more than 15% ethanol). – CONTINUED – Fuel 307 7 Starting and Operating In addition, some gasoline suppliers are now producing reformulated gasolines, which are designed to reduce vehicle emissions. SUBARU approves the use of reformulated gasoline. If you are not sure what the fuel contains, you should ask your service station operators if their gasolines contain detergents and oxygenates and if they have been reformulated to reduce vehicle emissions. As additional guidance, only use fuels suited for your vehicle as explained in the following. . Fuel should be unleaded and have an octane rating no lower than that specified in this manual. . Methanol (methyl or wood alcohol) is sometimes mixed with unleaded gasoline. Methanol can be used in your vehicle ONLY if it does not exceed 5% of the fuel mixture AND if it is accompanied by sufficient quantities of the proper cosolvents and corrosion inhibitors required to prevent damage to the fuel system. Do not use fuel containing methanol EXCEPT under these conditions. . If undesirable driveability problems are experienced and you suspect they may be fuel related, try a different brand of gasoline before seeking service at your SUBARU dealer. . Fuel system damage or driveability problems which result from the use of improper fuel are not covered under the SUBARU Limited Warranty. & Fuel Filler Lid and Cap s07aa02 ! Locations of the fuel filler lid s07aa0202 ! Refueling s07aa0201 Only one person should be involved in refueling. Do not allow others to approach the area of the vehicle near the fuel filler pipe while refueling is in progress. Be sure to observe any other precautions that are posted at the service station. 1. Stop the vehicle and turn the ignition switch to the “LOCK”/ “OFF” position and turn off all the other electrical components. 2. To unlock the fuel filler lid, perform one of the operations below. – Press the “ ” button on the key fob. – Press the unlock side of the power door locking switch. 3. Push the rear side of the fuel filler lid. 4. The fuel filler lid opens automatically. Open it further by hand. WARNING Before opening the fuel filler cap, first touch the vehicle body or a metal portion of the fuel pump or similar object to discharge any static electricity that may be present on your body. If your body is carrying an electrostatic charge, there is a possibility that an electric spark could ignite the fuel, which could burn you. To avoid acquiring a new static electric charge, do not get back into the vehicle while refueling is in progress. 308 Fuel 1 Open 2 Close 5. Remove the fuel filler cap by turning it slowly counterclockwise. WARNING . Gasoline vapor is highly flammable. Before refueling, always turn the ignition switch to the “LOCK”/“OFF” position first and then close all vehicle doors and windows. Make sure that there are no lighted cigarettes, open flames or electrical sparks in the adjacent area. Only handle fuel outdoors. Quickly wipe up any spilled fuel. . When opening the cap, grasp it firmly and turn it slowly to the left. Do not remove the cap quickly. Fuel may be under pressure and spray out of the fuel filler neck, especially in hot weather. If you hear a hissing sound while you are removing the cap, wait for the sound to stop and then slowly open the cap to prevent fuel from spraying out and creating a fire hazard. 6. Set the fuel filler cap on the cap holder inside the fuel filler lid. WARNING . When refueling, insert the fuel nozzle securely into the fuel filler pipe. If the nozzle is lifted or not fully inserted, its automatic stopping mechanism may not function, causing fuel to overflow the tank and creating a fire hazard. . Stop refueling when the automatic stop mechanism on the fuel nozzle activates. If you continue to add fuel, temperature changes or other conditions may cause fuel to overflow from the tank and create a fire hazard. 7. Stop filling the tank after the fuel filler pump automatically stops. Do not add any more fuel. 8. Put the cap back on and turn it clockwise until you hear a clicking noise. Be certain not to catch the tether under the cap while tightening. CAUTION Make sure that the cap is tightened until it clicks to prevent fuel spillage in the event of an accident. 9. Close the fuel filler lid completely. CAUTION Do not let fuel spill on the exterior – CONTINUED – Fuel 309 7 Starting and Operating surfaces of the vehicle. Because fuel may damage the paint, be sure to wipe off any spilled fuel quickly. Paint damage caused by spilled fuel is not covered under the SUBARU Limited Warranty. NOTE . You will see the “ ” sign in the fuel gauge. This indicates that the fuel filler lid is located on the right side of the vehicle. . If the fuel filler cap is not tightened until it clicks or if the tether is caught under the cap, the CHECK ENGINE warning light/malfunction indicator light may illuminate. Refer to “CHECK ENGINE Warning Light/ Malfunction Indicator Light” P161. . To lock the fuel filler lid, perform one of the operations below. However if these operations are performed when the fuel filler lid is open, the fuel filler lid will not lock when it is subsequently closed. – Press the “ ” button on the key fob. – Press the lock side of the power door locking switch. . When the doors are locked or unlocked using the automatic door lock system, the fuel filler lid will be locked or unlocked at the same time. CAUTION . Never add any cleaning agents to the fuel tank. The addition of a cleaning agent may cause damage to the fuel system. . After refueling, turn the cap to the right until it clicks to ensure that it is fully tightened. If the cap is not securely tightened, fuel may leak out while the vehicle is being driven or fuel spillage could occur in the event of an accident, creating a fire hazard. . Do not let fuel spill on the exterior surfaces of the vehicle. Because fuel may damage the paint, be sure to wipe off any spilled fuel quickly. Paint damage caused by spilled fuel is not covered under the SUBARU Limited Warranty. . Always use a genuine SUBARU fuel filler cap. If you use the wrong cap, it may not fit or have proper venting and your fuel tank and emission control system may be damaged. It could also lead to fuel spillage and a fire. . Immediately put fuel in the tank whenever the low fuel warning light illuminates. Engine misfires as a result of an empty tank could cause damage to the engine. Continuing to operate your vehicle at an extremely low fuel level may result in a reduction of engine performance. ! If the fuel filler lid cannot be opened s07aa0203 If the fuel filler lid cannot be opened due to a malfunction or a dead battery, it can be opened from the cargo area. 1. Cover the tip of a flat-head screwdriver with vinyl tape or cloth so that it will not scratch. Remove the access cover at the right-side of the cargo area trim 310 Fuel using a flat-head screwdriver. 1 Clip 2. Remove the clip from the trim. 3. Pull the clip to unlock the fuel filler lid. 7-2. State Emission Testing (U.S. Only) s07ab WARNING Only use a four-wheel dynamometer when testing an All-Wheel Drive (AWD) model. Testing of an AWD model must NEVER be performed on a single two-wheel dynamometer. Attempting to do so will result in uncontrolled vehicle movement and may cause an accident or injuries to persons nearby. CAUTION . At state inspection time, remember to tell your inspection or service station in advance not to place your SUBARU AWD vehicle on a two-wheel dynamometer. Otherwise, serious transmission damage will result. . Resultant vehicle damage due to improper testing is not covered under the SUBARU Limited Warranty and is the responsibility of the state inspection program or its contractors or licensees. California and a number of federal states have Inspection/Maintenance programs to inspect your vehicle’s emission control system. If your vehicle does not pass this test, some states may deny renewal of your vehicle’s registration. Your vehicle is equipped with a computer that monitors the performance of the engine’s emission control system. Certified emission inspectors will inspect the On-Board Diagnostic (OBDII) system as part of the state emission inspection process. The OBDII system is designed to detect engine and transmission problems that might cause the vehicle emissions to exceed allowable limits. OBDII inspections apply to all 1996 model year and newer passenger cars and trucks. Over 30 states plus the District of Columbia have implemented emission inspection of the OBDII system. . The inspection of the OBDII system consists of a visual operational check of the “CHECK ENGINE” warning light/ malfunction indicator light (MIL) and an examination of the OBDII system with an electronic scan tool. . A vehicle passes the OBDII system inspection if proper operation of the “CHECK ENGINE” warning light is – CONTINUED – State Emission Testing (U.S. Only) 311 7 Starting and Operating observed, there are no stored diagnostic trouble codes, and the OBDII readiness monitors are all complete. . A vehicle fails the OBDII inspection if the “CHECK ENGINE” warning light is not properly operating (light is illuminated or is not working due to faulty LED (Light Emitting Diode)) or there is one or more diagnostic trouble codes stored in the vehicle’s computer. . A state emission inspection may reject (not pass or fail) a vehicle if the number of OBDII system readiness monitors “NOT READY” is greater than one. If the vehicle’s battery has been recently replaced or disconnected, the OBDII system inspection may indicate that the vehicle is not ready for the emission test. Under this condition, the vehicle driver should be instructed to drive his/ her vehicle for a few days to reset the readiness monitors and return for an emission re-inspection. . Owners of rejected or failing vehicles should contact their SUBARU Dealer for service. Some states still use dynamometers in their emission inspection program. A dynamometer is a treadmill or roller-like testing device that allows your vehicle’s wheels to turn while the vehicle remains in one place. Prior to your vehicle being put on a dynamometer, tell your emission inspector not to place your SUBARU AWD vehicle on a two-wheel dynamometer. Otherwise, serious transmission damage will result. The U.S. Environmental Protection Agency (EPA) and states using two-wheel dynamometers in their emission testing program have EXEMPTED SUBARU AWD vehicles from the portion of the testing program that involves a two-wheel dynamometer. There are some states that use four-wheel dynamometers in their testing program. When properly used, this equipment should not damage a SUBARU AWD vehicle. Under no circumstances should the rear wheels be jacked off the ground, nor should the driveshaft be disconnected in an attempt to bypass AWD for state emission testing. An AWD vehicle must be tested using an AWD dynamometer with all 4 wheels driven and loaded. 7-3. Preparing to Drive s07ac You should perform the following checks and adjustments every day before you start driving. 1. Check that all windows, mirrors, and lights are clean and unobstructed. 2. Check the appearance and condition of the tires. Also check tires for proper inflation. 3. Look under the vehicle for any sign of leaks. 4. Check that no small animals enter the engine compartment. 5. Check that the hood and rear gate are fully closed. 6. Check the adjustment of the seat. 7. Check the adjustment of the inside and outside mirrors. 8. Fasten your seatbelt. Check that your passengers have fastened their seatbelts. 9. Check the operation of the warning and indicator lights when the ignition switch is turned to the “ON” position. 10. Check the gauges, indicator and warning lights after starting the engine. 312 Preparing to Drive CAUTION Trapping small animals in the cooling fan and drive belt may result in a malfunction. Check that no small animal enters the engine compartment and under the vehicle before starting the engine. NOTE . Engine oil, engine coolant, brake fluid, washer fluid and other fluid levels should be checked daily, weekly or at fuel stops. . When towing a trailer, refer to “Trailer Hitch (Dealer Option)” P412. 7-4. Starting and Stopping the Engine (Models without Push-Button Ignition Switch) s07bd & General Precautions When Starting/Stopping Engine s07bd06 WARNING . Never start the engine from outside the vehicle (except when using the remote engine start system). It may result in an accident. . Do not leave the engine running in locations with poor ventilation, such as a garage and indoors. The exhaust gas may enter the vehicle or indoors, and it may result in carbon monoxide poisoning. . Do not start the engine near dry foliage, paper, or other flammable substances. The exhaust pipe and exhaust emissions can create a fire hazard at high temperatures. CAUTION . If the engine is stopped during driving, the catalyst may overheat and burn. . When starting the engine, be sure to sit in the driver’s seat (except when using the remote engine start system). NOTE . Avoid racing and rapid acceleration immediately after the engine has started. . After the engine starts, the engine speed will be kept high. . On rare occasions, it may be difficult to start the engine depending on the fuel used and the driving condition (repeated short trips when the engine is not warmed up sufficiently). In such a case, it is recommended to switch to a different brand of fuel. . On rare occasions, transient knocking may be heard from the engine when the accelerator is operated rapidly such as a rapid start-up and a rapid acceleration. This is not a malfunction. . The engine starts more easily when the headlights, air conditioner and – CONTINUED – Starting and Stopping the Engine (Models without Push-Button Ignition Switch) 313 7 Starting and Operating rear window defogger are turned off. & Starting Engine s07bd01 CAUTION Do not operate the engine starter continuously for more than 10 seconds. If the engine fails to start after operating the engine starter for 5 to 10 seconds, wait for 10 seconds or more before trying again. NOTE . It may be difficult to start the engine when the battery has been disconnected and reconnected (for maintenance or other purposes). This difficulty is caused by the electronically controlled throttle’s self-diagnosis function. To overcome it, keep the ignition switch in the “ON” position for approximately 10 seconds before starting the engine. . Do not shift the select lever while the engine starter is cranking. CAUTION If you restart the engine while the vehicle is moving, shift the select lever into the “N” position. Do not attempt to place the select lever of a moving vehicle into the “P” position. 1. Apply the parking brake. 2. Turn off unnecessary lights and accessories. 3. Shift the select lever to the “P” or “N” position (preferably “P” position). The engine starter will only operate when the select lever is at the “P” or “N” position. 4. Turn the ignition switch to the “ON” position and check the operation of the warning and indicator lights. Refer to “Warning and Indicator Lights” P156. 5. Turn the ignition switch to the “START” position without depressing the accelerator pedal. Release the key immediately after the engine has started. If the engine does not start, perform the following procedure. (1) Turn the ignition switch to the “LOCK” position and wait for at least 10 seconds. After checking that the parking brake is applied, turn the ignition switch to the “START” position while depressing the accelerator pedal slightly (approximately a quarter of the full stroke). Release the accelerator pedal as soon as the engine starts. (2) If this fails to start the engine, turn the ignition switch back to the “LOCK” position and wait for at least 10 seconds. Then fully depress the accelerator pedal and turn the ignition switch to the “START” position. If the engine starts, quickly release the accelerator pedal. (3) If this fails to start the engine, turn the ignition switch again to the “LOCK” position. After waiting for 10 seconds or longer, turn the ignition switch to the “START” position without depressing the accelerator pedal. (4) If the engine still does not start, contact your nearest SUBARU dealer for assistance. 6. Confirm that all warning and indicator lights have turned off after the engine has started. The fuel injection system automatically lowers the idle speed as the engine warms up. While the engine is warming up, make sure that the select lever is at the “P” or “N” position and that the parking brake is applied. 314 Starting and Stopping the Engine (Models without Push-Button Ignition Switch) & Stopping the Engine s07bd02 The ignition switch should be turned off only when the vehicle is stopped and the engine is idling. WARNING Do not stop the engine when the vehicle is moving. This will cause loss of power to the power steering and the brake booster, making steering and braking more difficult. It could also result in accidental activation of the “LOCK” position on the ignition switch, causing the steering wheel to lock. 1. Stop the vehicle completely. 2. Move the select lever to the “P” position. 3. Turn the ignition switch to the “LOCK/ OFF” position. The engine will stop, and the power will be switched off. & Steering Lock s07bd07 After stopping the engine and the key is removed from ignition switch, the steering wheel will be locked due to the steering lock function. When the engine is restarted, the steering lock will be automatically released. ! When the steering lock cannot be released s07bd0701 When you cannot unlock the steering wheel, perform the following steps. 1. Check that the parking brake is applied. 2. Turn off unnecessary lights and accessories. 3. Check that the select lever is set in the “P” position. 4. Depress the brake pedal and keep it depressed. 5. Turn the ignition switch to the “ON” position while turning the steering wheel left and right. If you cannot unlock the steering wheel by doing the steps, consult your nearest SUBARU dealer. 7-5. Starting and Stopping Engine (Models with Push- Button Start System) s07be & Safety Precautions s07be06 Refer to “Safety Precautions” P109. & Operating Range for Push- Button Start System s07be01 Refer to “Operating Range for Push- Button Start System” P150. & Starting Engine s07be03 WARNING . There are some general precautions when starting the engine. Carefully read the precautions described in “General Precautions When Starting/Stopping Engine” P313. . If the indicator on the push-button ignition switch flashes in green after the engine has started, never drive the vehicle. The steering is still locked, and it may result in an accident. – CONTINUED – Starting and Stopping Engine (Models with Push-Button Start System) 315 7 Starting and Operating CAUTION . When the operation indicator on the push-button ignition switch is flashing in orange, there may be a malfunction with the vehicle. Contact a SUBARU dealer immediately. . If the indicator on the push-button ignition switch is flashing in green after the engine has started, it means that the steering is still locked. While moving the steering wheel right and left, depress the brake pedal, and press the push-button ignition switch. . Do not continue pressing the push-button ignition switch for more than 10 seconds. Doing so could cause a malfunction. If the engine does not start, stop pressing the push-button ignition switch. Instead, press the pushbutton ignition switch without depressing the brake pedal to switch the power status to “OFF”. Wait 10 seconds, and then press the push-button ignition switch to start the engine. NOTE . When pressing the push-button ignition switch while depressing the brake pedal: – The engine starter operates for a maximum of 10 seconds and after starting the engine, the engine starter stops automatically. – The engine can be started regardless of the power status. . If the engine does not start, check the security indicator light. Then press the push-button ignition switch without depressing the brake pedal to switch the power to “OFF”. – If the light had illuminated, try to start the engine again. – If the light had been off, press the push-button ignition switch while depressing the brake pedal more forcefully. . The engine start procedures may not function depending on the radio wave conditions around the vehicle. In such a case, refer to “Starting Engine” P442. . If the vehicle battery is discharged, the steering cannot be unlocked. Charge the battery. . It may be difficult to start the engine when the battery has been disconnected and reconnected (for maintenance or other purposes). This difficulty is caused by the electronically controlled throttle’s self-diagnosis function. To overcome it, keep the ignition switch in the “ON” position for approximately 10 seconds before starting the engine. . After the engine starts, the engine speed will be kept high. . Do not shift the select lever while the engine starter is cranking. 1 Operation indicator 2 Push-button ignition switch When the push-button ignition switch is pressed while depressing the brake pedal, the engine will start. The starting procedure for the engine is as follows. 1. Carry the access key fob, and sit in the driver’s seat. 316 Starting and Stopping Engine (Models with Push-Button Start System) 2. Make sure the parking brake is applied. 3. Make sure the select lever is in the “P” position. The engine can also start when the select lever is in the “N” position, however, for safety reasons, start in the “P” position. 4. Depress the brake pedal until the operation indicator on the push-button ignition switch turns green. When starting with the select lever in the “N” position, the indicator does not turn green. 5. While depressing the brake pedal, press the push-button ignition switch. NOTE While pressing the select lever button in, the indicator on the push-button ignition switch will not turn green even when the select lever is in the “P” position. & Stopping Engine s07be04 1. Stop the vehicle completely. 2. Move the select lever to the “P” position. 3. Press the push-button ignition switch. The engine will stop, and the power will be switched off. WARNING . Do not touch the push-button ignition switch during driving. When the push-button ignition switch is operated as follows, the engine will stop. – The switch is pressed and held for 3 seconds or longer. – The switch is pressed briefly 3 times or more in succession. The power steering system will not operate either. A greater force will be required to steer, and it may result in an accident. . If the engine stops during driving, do not operate the push-button ignition switch or open any of the doors until the vehicle is stopped in a safe location. It is dangerous because the steering lock may be activated. Stop the vehicle in a safe place, and contact a SUBARU dealer immediately. CAUTION . Do not stop the engine while the select lever is in a position other than the “P” position. . If the engine is stopped while the select lever is in a position other than the “P” position, the power will be in “ACC”. If the vehicle is left in this condition, the battery may be discharged. NOTE . If you press the push-button ignition switch while driving, the emergency engine stop interrupt screen alerts the driver by messages on the combination meter display (color LCD) and beeps. – CONTINUED – Starting and Stopping Engine (Models with Push-Button Start System) 317 7 Starting and Operating . Although you can stop the engine by operating the push-button ignition switch, do not stop the engine during driving except in an emergency. & When Access Key Fob Does Not Operate Properly s07be05 Refer to “Access Key Fob – If Access Key Fob Does Not Operate Properly” P441. & Steering Lock s07be07 After stopping the engine and any door is opened, the steering wheel will be locked due to the steering lock function. When the engine is restarted, the steering lock will be automatically released. ! When the steering lock cannot be released s07be0701 1 Operation indicator 2 Push-button ignition switch When you cannot restart the engine due to the steering lock, check the status of operation indicator and perform the following steps. ! Operation indicator flashing in green s07be070101 1. Check that the select lever is set in the “P” position. 2. Depress the brake pedal and keep it. 3. Press the push-button ignition switch while turning the steering wheel left and right. ! Operation indicator flashing in orange s07be070102 There may be a malfunction in the steering lock function. Immediately contact your nearest SUBARU dealer. 318 Starting and Stopping Engine (Models with Push-Button Start System) 7-6. Remote Engine Start System (Dealer Option) s07az WARNING . There are some general precautions when starting the engine. Carefully read the precautions described in “General Precautions When Starting/Stopping Engine” P313. . Do not remote start a vehicle in an enclosed environment (e.g. closed garage). Prolonged operation of a motor vehicle in an enclosed environment can cause a harmful build-up of carbon monoxide. Carbon monoxide is harmful to your health. Exposure to high levels of carbon monoxide can cause headaches, dizziness or in extreme cases unconsciousness and/or death. The remote engine start system allows you to start the engine from outside the vehicle. In addition, the remote engine start system can activate the heater or air conditioner, providing you with a comfortable cabin upon entry. For more details, refer to the Owner’s Manual supplement for the remote engine start system. NOTE . The length of time for which it is acceptable to allow the engine to remain idling may be bound by local laws and regulations. Check the local rules when using the remote engine start system. . When taking your vehicle in for service, it is recommended that you inform the service personnel that your vehicle is equipped with a remote engine start system. & Remote Engine Starter Transceiver (Fob) s07az21 1 Fob button ! Starting the engine s07az2101 NOTE All vehicle doors and the engine hood must be closed prior to activating the remote engine start system. Any open entry point will prevent starting or cause the engine to stop. The remote engine start system is activated by pressing the fob button on your remote engine starter transceiver (fob) twice within 3 seconds. If the fob is within operating range of the system and the start request is received, the following will occur. . The fob flashes and beeps once. . The horn sounds once. . The side marker lights, tail lights, and parking lights flash once. The system will check certain safety preconditions before starting, and if all conditions are met, the engine will start within 5 seconds. After the engine starts, the following will occur. . The fob flashes and beeps twice. . The horn sounds once. . The side marker lights, tail lights, and parking lights flash once. While the engine is idling via the remote engine start system, the following will – CONTINUED – Remote Engine Start System (Dealer Option) 319 7 Starting and Operating occur. . The side marker lights, tail lights, and parking lights remain illuminated. . The fob button flashes once every 3 seconds. . The power windows are disabled. If the engine turns over but does not start (or starts and stalls) the remote engine start system will power off and then attempt to start the engine 3 additional times. The system will not attempt to restart the engine if it determines a vehicle malfunction is preventing starting. If the engine does not start after 3 additional attempts, the remote engine start request will be aborted. ! Stopping the engine s07az2102 Press and hold the fob button for at least 2 seconds to stop the engine. The fob will flash and beep three times, indicating the engine has stopped. If the stop request is not received (for example, if the user is too far away from the vehicle), the fob will continue to flash once every 3 seconds. The system will automatically stop the engine after 15 minutes. ! Remote start safety features s07az2103 For safety and security reasons, the remote engine start system will prevent starting (or stop the engine if running) and sound the horn twice if any of the following conditions is detected. In addition, the fob will flash and beep 3 times. . The total run-time has exceeded 20 minutes. . The brake pedal is depressed. . A key is in the ignition switch. . The engine hood is open. . The engine idle speed exceeds 3,500 rpm. . The security alarm is triggered. . The select lever is not in the “P” position. If the system detects any door open during operation, it will prevent starting or stop the engine, and sound the horn and flash side marker lights, tail lights, and parking lights 6 times. In addition to the items above, if the vehicle’s engine management system determines there is a safety risk due to a vehicle-related problem, the vehicle will power down and the horn will sound 3 times. NOTE . If the alarm system is armed at the time of remote engine starter activation (the security indicator light on the combination meter is flashing), the alarm system will remain armed throughout the remote start run cycle. . If the alarm system is disarmed at the time of remote engine starter activation (the security indicator light on the combination meter is not flashing), the alarm system will remain disarmed throughout the remote start run cycle. ! Remote start operation – fob confirmation s07az2104 Your remote engine starter fob is a bidirectional transceiver that can confirm system operation with several different visual and audible indications. The fob’s LED-backlit button and internal piezo buzzer will indicate the status of the system using the following the flash and beep sequences, provided the fob is within operational range of the system. 320 Remote Engine Start System (Dealer Option) Precondition Fob Indication Meaning Flash Beep Fob start button is being pressed Continuous while button is held down — The fob is transmitting an RF signal User attempts to start engine by pressing fob button twice within 3 sec 1 flash 1 beep Engine start request received 2 flashes 2 beeps Engine started successfully 1 flash every 3 sec — Engine idling 3 flashes 3 beeps Vehicle is in range but engine not started Engine idling by remote engine start operation 1 flash every 3 sec — Engine idling 3 flashes 3 beeps Engine stopped by system time-out or for safety reasons (see sections above) User attempts to stop engine by pressing and holding fob button for at least 2 sec 3 flashes 3 beeps Engine stopped by user request 1 flash every 3 sec — Stop request not received. Engine still idling. – CONTINUED – Remote Engine Start System (Dealer Option) 321 7 Starting and Operating & Alternate Operation Method for Models with “Keyless Access with Push-Button Start System” s07az22 Access key fob 1 Lock button An access key fob can be used as the remote engine start transmitter. Operate the lock button to start or stop the engine as follows. ! Before starting the engine s07az2201 Before using the remote engine start system to start the engine, confirm the following conditions. . The select lever is in the “P” position. . All doors are closed. . The engine hood is closed. . The push-button ignition switch is in the “OFF” position. ! Starting the engine s07az2202 To start the engine with remote engine start system, briefly press the lock button twice within 2 seconds, then press and hold the lock button for 3 seconds. 1. Press the lock button briefly. The hazard warning flashers then flash once and the buzzer chirps once. 2. Within 2 seconds, press the lock button briefly again. The hazard warning flashers then flash once again, and the buzzer chirps once again. 3. After step 2, immediately press and hold the lock button. The hazard warning flashers then flash three times, and the horn will honk once. 4. Approximately 3 seconds after step 3, release the lock button. The engine will then start successfully. ! Stopping the engine s07az2203 Press and hold the lock button to stop the engine with remote engine start system. ! Remote start safety features s07az2204 For detailed information, refer to “Remote start safety features” P320. & Entering the Vehicle While It Is Running via Remote Start (Models without “Keyless Access with Push-Button Start System”) s07az03 1. Unlock the vehicle doors using the remote keyless entry system. NOTE If the vehicle’s doors are unlocked manually using the key, the vehicle’s alarm system will trigger (if the alarm system is armed prior to activating the remote engine start system) and the engine will turn off. Perform either of the following procedures to disarm the alarm system. Refer to “Alarm System” P133. – Insert the key into the ignition switch and turn it to the “ON” position. – Press any button on the remote keyless entry transmitter. 2. Enter the vehicle. The engine will shut down when any door is opened. 3. Insert the key into the ignition switch and turn it to the “START” position to restart the engine. 322 Remote Engine Start System (Dealer Option) & Entering the Vehicle While It Is Running via Remote Start (Models with “Keyless Access with Push-Button Start System”) s07az24 1. Unlock the vehicle doors using the keyless access function and remote keyless entry system. NOTE If the vehicle’s doors are unlocked manually using the key, the vehicle’s alarm system will trigger (if the alarm system is armed prior to activating the remote engine start system) and the engine will turn off. Perform either of the following procedures to disarm the alarm system. Refer to “Alarm System” P133. – Turn the push-button ignition switch to the “ACC” or “ON” position. – Press any button on the access key fob. 2. Enter the vehicle. The engine will remain running provided the access key fob is present and detected by the vehicle. 3. Press the push-button ignition switch once while depressing the brake pedal before driving your vehicle. The remote engine starter transceiver (fob) will flash and beep 3 times to indicate that the remote start system has been shut down. & Entering the Vehicle Following Remote Engine Start Shutdown s07az10 An alarm trigger may occur if the vehicle is opened by the remote keyless entry transmitter within a few seconds immediately following remote engine start shutdown. & Pre-heating or Pre-cooling the Interior of the Vehicle s07az04 Before exiting the vehicle, set the temperature controls to the desired setting and operation. After the system starts the engine, the heater or air conditioning will activate and heat or cool the interior to your setting. & Remote Transmitter Program (Remote Engine Starter Transceiver) s07az13 New transmitters can be programmed to the remote engine start system in the event that a transmitter is lost, stolen, damaged or additional transmitters are desired (the system will accept up to eight transmitters). New remote engine start transmitters can be programmed according to the following procedure. 1. Open the driver’s door (the driver’s door must remain open throughout the entire process). 2. Depress and hold the brake pedal. 3. Turn the ignition switch to “ON” then “LOCK”/“OFF”, back to “ON” then “LOCK”/“OFF”, back to “ON” then “LOCK”/“OFF”, then back to “ON” again and leave the ignition “ON” throughout the programming process. 4. The system will flash the side marker lights, tail lights and parking lights and honk the horn three times, indicating that the system has entered the transmitter learn mode. 5. Press and release the “ ” button on the transmitter that you want to program. 6. The system will flash the side marker lights, tail lights and parking lights and honk the horn one time, indicating that the system has learned the transmitter. Upon successful programming, the remote start confirmation transmitter button will flash one time. 7. Repeat step 5 for any additional transmitters (the system will accept up to eight transmitters). – CONTINUED – Remote Engine Start System (Dealer Option) 323 7 Starting and Operating 8. The system will exit the transmitter learn mode if the key is turned to the “LOCK”/“OFF” position, the door is closed or after 2 minutes. & System Maintenance s07az09 NOTE For remote engine starter transceiver: In the event that the vehicle’s battery is replaced, discharged or disconnected, it will be necessary to start the vehicle a minimum of one time using the key prior to activating the remote engine start system. This is required to allow the vehicle electronic systems to resynchronize. ! Changing the battery s07az0901 CAUTION . Do not let dust, oil or water get on or in the remote engine start transmitter when replacing the battery. . Be careful not to damage the printed circuit board in the remote engine start transmitter when replacing the battery. . Be careful not to allow children to touch the battery and any removed parts; children could swallow them. . There is a danger of explosion if an incorrect replacement battery is used. Replace only with the same or equivalent type of battery. . Battery should not be exposed to excessive heat such as sunshine, fire or the like. For models with “keyless access with push-button start system”: Perform the procedure described in “Replacing Battery of Access Key Fob” P497. For remote engine starter transceiver: The 3-volt lithium battery (model CR-2450) supplied in your remote engine start transmitter should last approximately one year, depending on usage. When the battery begins to weaken, you will notice a decrease in range (distance from the vehicle that your remote control operates). Follow the instructions below to change the remote engine start transmitter battery. 1. Remove the small phillips screw located on the back side lower left corner of the transmitter. 2. Carefully pry the remote engine start transmitter halves apart using a small flat-head screwdriver. 324 Remote Engine Start System (Dealer Option) 3. Remove the circuit board from the bottom half of the case and remove the battery and replace with new one. Be sure to observe the (+) sign on the old battery before removing it to ensure that the new battery is inserted properly (battery “+” should be pointed away from the transmitter circuit board on battery). 4. Carefully snap the case halves back together, reinstall the phillips screw and test the remote engine start system. & Certification for Remote Engine Starter s07az23 ! U.S.-spec. models s07az2301 CAUTION FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ! Canada-spec. models s07az2302 Remote Engine Start System (Dealer Option) 325 7 Starting and Operating 7-7. Continuously Variable Transmission s07bg WARNING Do not shift from the “P” or “N” position into the “D” or “R” position while depressing the accelerator pedal. This may cause the vehicle to lurch forward or backward. CAUTION . Observe the following precautions. Failure to observe these precautions could cause damage to the transmission. – Shift into the “P” or “R” position only after the vehicle has completely stopped. – Do not shift from the “D” position into the “R” position or vice versa until the vehicle has completely stopped. . Do not race the engine for more than 5 seconds in any position except the “N” or “P” position when the brake is applied or when chocks are used in the wheels. This may cause the transmission fluid to overheat. . Never move the vehicle rearward by inertia with the select lever set in a forward driving position or move the vehicle forward by inertia with the select lever set in the “R” position. Doing so may result in an unexpected accident or malfunction. . When parking the vehicle, first securely apply the parking brake and then place the select lever in the “P” position. Do not park for a long time with the select lever in any other position as doing so could result in a dead battery. & Continuously Variable Transmission Features s07bg06 The continuously variable transmission is electronically controlled and provides an infinite number of forward speeds and 1 reverse speed. For some models, it also has a manual mode or an “L” position. NOTE . When the engine coolant temperature is still low, the transmission will shift at higher engine speeds than when the coolant temperature is sufficiently high in order to shorten the warm-up time and improve driveability. The gearshift timing will automatically shift to the normal timing after the engine has warmed up. . Immediately after transmission fluid is replaced, you may feel that the transmission operation is somewhat unusual. This results from invalidation of data which the on-board computer has collected and stored in memory to allow the transmission to shift at the most appropriate times for the current condition of your vehicle. Optimized shifting will be restored as the vehicle continues to be driven for a while. . When driving under continuous heavy load conditions such as climbing a long, steep hill, the engine speed, vehicle speed and air conditioning system cooling performance may automatically be reduced. This is not a malfunction. This phenomenon results from the engine control function maintaining the cooling performance of the vehicle. The engine and vehicle speed will return to a normal speed when the engine is able to maintain the optimum cooling performance after the heavy load decreases. Driving under a heavy load must be performed with ex- 326 Continuously Variable Transmission treme care. . The continuously variable transmission is a chain type system that provides superior transmission efficiency for maximum fuel economy. At times, depending on varying driving conditions, a chain operating noise may be heard that is characteristic of this type of system. . Place the shift boot to the original position after it is lifted. If the select lever is operated with the shift boot in the rolled up position, the shift boot may have tension and it may disturb the select lever operation. & Select Lever s07bg01 1 Select lever button 1 Models with “L” position 2 Models with manual mode : With the brake pedal depressed, shift while pressing the select lever button in : Shift while pressing the select lever button in : Shift without pressing the select lever button The select lever has four positions, “P”, “R”, “N”, “D” and also has an “L” or “M” gate. NOTE . For some models, to protect the engine while the select lever is in the “P” or “N” position, the engine is controlled so that the engine speed may not become too high even if the accelerator pedal is depressed hard. . When you change the select lever position, make sure to move the select lever firmly to the selected position. ! P (Park) s07bg0101 This position is for parking the vehicle and starting the engine. In this position, the transmission is mechanically locked to prevent the vehicle from rolling freely. When you park the vehicle, first apply the parking brake, then shift into the “P” position. Do not hold the vehicle with only the mechanical friction of the transmission. To shift the select lever from the “P” to any other position, you should depress the brake pedal fully then move the select lever. This prevents the vehicle from lurching when it is started. ! R (Reverse) s07bg0102 This position is for backing the vehicle. To shift from the “N” to “R” position, stop the vehicle completely then move the lever to the “R” position while pressing the select lever button in. When the ignition switch has been turned to the “ACC” position, the movement of the select lever from the “N” to “R” position is only possible by depressing the brake pedal. For details, refer to “Shift Lock – CONTINUED – Continuously Variable Transmission 327 7 Starting and Operating Function” P328. ! N (Neutral) s07bg0103 This position is for restarting a stalled engine. In this position, the transmission is neutral, meaning that the wheels and transmission are not locked. Therefore, the vehicle will roll freely, even on the slightest incline unless the parking brake or foot brake is applied. Avoid coasting with the transmission in neutral. Engine braking has no effect in this condition. WARNING Do not drive the vehicle with the select lever in the “N” (neutral) position. Engine braking has no effect in this condition and the risk of an accident is consequently increased. ! D (Drive) s07bg0104 This position is for normal driving. The transmission shifts automatically and continuously into a suitable gear according to the vehicle speed and the acceleration you require. Also, while driving up and down a hill, the transmission assists and controls the driving performance and engine braking while corresponding to the road grade. When more acceleration is required in “D” position, depress the accelerator pedal fully to the floor and hold that position. The transmission will automatically downshift. In this case, the transmission will operate like a conventional automatic transmission. When you release the pedal, the transmission will return to the original gear position. If one of the shift paddles behind the steering wheel is operated while driving in the “D” position, the transmission will temporarily switch to the manual mode. In this mode, you can shift to any gear position using the shift paddles. For details about the manual mode, refer to “Selection of Manual Mode” P330. Once the vehicle speed stabilizes, the transmission will switch from the manual mode back to the “D” position for normal driving. ! While climbing a grade s07bg010401 When driving up a hill, undesired upshift is prevented from taking place when the accelerator is released. This minimizes the chance of subsequent downshifting to a lower gear when accelerating again. This prevents repeated upshifting and downshifting resulting in a smoother operation of the vehicle. NOTE The transmission may downshift, depending on the way the accelerator pedal is depressed to accelerate the vehicle again. & Shift Lock Function s07bg04 The shift lock function helps prevent the improper operation of the select lever. . The select lever cannot be operated unless the ignition switch is turned to the “ON” position and the brake pedal is depressed. . The select lever cannot be moved from the “P” position to any other position before the brake pedal is depressed. Depress the brake pedal first, and then operate the select lever. . Only the “P” position allows you to turn the key from the “ACC” position to the “LOCK” position and remove the key from the ignition key cylinder (models without “keyless access with pushbutton start system”). . Only the “P” position allows you to turn the push-button ignition switch to the “OFF” position (models with “keyless access with push-button start system”). . If the ignition switch is turned to the “ACC” position while the select lever is in the “N” position, the select lever may 328 Continuously Variable Transmission not be moved to the “P” position without depressing the brake pedal and pressing the select lever button. ! Shift lock release s07bg0401 If the select lever cannot be operated, turn the ignition switch back to the “ON” position, then move the select lever to the “P” position with the select lever button pressed and the brake pedal depressed. If the select lever does not move after performing the above procedure, check and confirm the following and release the shift lock accordingly. . When the select lever cannot be shifted from “P” to “N”: Refer to “Shift lock release using the shift lock release portion” P329. . When the select lever cannot be shifted from “N” to “R” or “P”: Place the ignition switch in the “ACC” position, then move the select lever to the “P” position with the brake pedal depressed. If the select lever still does not move, refer to “Shift lock release using the shift lock release portion” P329. If the shift lock cannot be released without using the shift lock release button in the above cases, there may be a malfunction in the shift lock system or the vehicle control system. Contact a SUBARU dealer for an inspection as soon as possible. ! Shift lock release using the shift lock release portion s07bg0402 Perform the following procedure to release the shift lock. 1. Apply the parking brake and stop the engine. 1 Slit 2. Cover the tip of a flat-head screwdriver with vinyl tape or cloth so that it will not scratch. Insert a flat-blade screwdriver into the two slits and then lift upward. 3. Remove the center tray or wireless charger (if equipped). 4. While depressing the brake pedal, press the shift lock release portion, and then move the select lever. – CONTINUED – Continuously Variable Transmission 329 7 Starting and Operating If the select lever does not move after performing the above procedure, the shift lock system may be malfunctioning. Contact a SUBARU dealer for an inspection as soon as possible. & Selection of Manual Mode (If Equipped) s07bg02 With the vehicle either moving or stationary, move the select lever from the “D” position to the “M” position to select the manual mode. 1 Upshift indicator 2 Downshift indicator 3 Gear position indicator When the manual mode is selected, the gear position indicator and upshift indicator and/or downshift indicator on the combination meter illuminate. The gear position indicator shows the currently selected gear in the 1st-to-8th gear range. The upshift and downshift indicators show when a gearshift is possible. When the upshift indicator “ ” is on, upshifting is possible. When the downshift indicator “ ” is on, downshifting is possible. When both indicators are on, upshifting and downshifting are both possible. When the vehicle stops (for example, at traffic signals), the downshift indicator turns off. Gearshifts can be performed using the shift paddle behind the steering wheel. To upshift to the next higher gear position, pull the shift paddle that has “+” indicated on it. To downshift to the next lower gear position, pull the shift paddle that has “−” indicated on it. To deselect the manual mode, return the select lever to the “D” position from the “M” position. While driving with the select lever in the “D” position, if you change gears by operating the shift paddle, the gear position indicator illuminates and shows the current gear condition. CAUTION Do not place or hang anything on the shift paddles. Doing so may result in 330 Continuously Variable Transmission accidental gear shifting. NOTE Please read the following points carefully and bear them in mind when using the manual mode. . If you attempt to shift down when the engine speed is too high, i.e., when a downshift would push the tachometer needle beyond the red zone, beeps will be emitted to warn you that the downshift is not possible. . If you attempt to shift up when the vehicle speed is too low, the transmission will not respond. . You can perform a skip-shift (for example, from 4th to 2nd) by operating the shift paddle twice in rapid succession. . The transmission automatically selects 1st gear when the vehicle stops moving. . If the temperature of the transmission fluid becomes too high, the AT OIL TEMP warning light will illuminate. Immediately stop the vehicle in a safe place and let the engine idle until the warning light turns off. & Selection of “L” (If Equipped) s07bg03 “L” is for using engine braking when going down a hill, etc. To select this mode, move the select lever from the “D” position to the “L” position. When selected, the indicator “L” will illuminate on the combination meter. To deselect “L”, move the select lever to the “D” position. & Driving Tips s07bg05 NOTE If the accelerator and brake pedals are depressed at the same time, driving torque may be restrained. This is not a malfunction. . On a road surface where there is a risk of wheelspin (for example, a snow- or gravel-covered road), you can pull away from a standstill safely and easily by first selecting the 2nd gear of the manual mode. . Always apply the foot or parking brake when the vehicle is stopped in the “D” or “R” position. . Make sure to apply the parking brake when parking your vehicle. Do not hold the vehicle with only the transmission. . Do not keep the vehicle in a stationary position on an uphill grade by using the “D” position. Use the brake instead. . The engine may, on rare occasions, knock when the vehicle rapidly accelerates or rapidly pulls away from a standstill. This phenomenon does not indicate a malfunction. Continuously Variable Transmission 331 7 Starting and Operating 7-8. SI-DRIVE s07bc SI-DRIVE (SUBARU Intelligent Drive) works to maximize engine performance, control and efficiency. This system consists of the following modes: . Intelligent (I) mode . Sport (S) mode Intelligent (I) mode is selected when the push-button ignition switch is turned to the “ON” position. By adjusting the SI-DRIVE switch, the character of the power unit changes. & Intelligent (I) Mode s07bc02 ! For smooth, efficient performance driving s07bc0201 The linear acceleration characteristic of the Intelligent (I) mode is ideal for normal driving usage. The Intelligent (I) mode provides wellbalanced performance with greater fuel efficiency and smooth driveability without stress. Power delivery is moderate during acceleration for maximum fuel efficiency. This is ideal for around-town driving and situations that do not require full power output. It provides better control in difficult driving conditions, such as slippery roads or loose surfaces, due to gentler throttle response. & Sport (S) Mode s07bc03 ! For all-around performance driving s07bc0301 The Sport (S) mode provides the engine power desired by those who want to make the driving experience their own personal adventure. & SI-DRIVE Switch s07bc01 NOTE . If any of the SI-DRIVE indicators blink, the SI-DRIVE system may be malfunctioning. Contact your SUBARU dealer. . The default mode of the SI-DRIVE system is the Intelligent (I) mode. Once you turn off the engine, the previous setting mode is canceled and the SI-DRIVE system returns to 332 SI-DRIVE the Intelligent (I) mode the next time you turn on the engine. . While the engine is running, if the CHECK ENGINE warning light/malfunction indicator light illuminates, the SI-DRIVE mode changes to the Intelligent (I) mode. In this case, it is not possible to change to another mode. SI-DRIVE switch To select the intelligent (I) mode, press the “I” side of the switch. To select the Sport (S) mode, press the “S” side of the switch. 7-9. Power Steering s07aj Power steering warning light The vehicle is equipped with an electric power steering system. When the ignition switch is turned to the “ON” position, the power steering warning light on the combination meter illuminates to inform the driver that the warning system is functioning properly. Then, if the engine started, the warning light turns off to inform the driver that the steering power assist is operational. CAUTION While the power steering warning light is illuminated, there may be more resistance when the steering wheel is operated. Drive carefully to the nearest SUBARU dealer and have the vehicle inspected immediately. NOTE If the steering wheel is operated in the following ways, the power steering control system may temporarily limit the power assist in order to prevent the system components, such as the control computer and drive motor, from overheating. . The steering wheel is operated frequently and turned sharply while the vehicle is maneuvered at extremely low speeds, such as while frequently turning the steering wheel during parallel parking. . The steering wheel remains in the fully turned position for a long period of time. At this time, there will be more resistance when steering. However, this is not a malfunction. Normal steering force will be restored after the steering wheel is not operated for a while and the power steering control system has an opportunity to cool down. However, if the power steering is operated in a non-standard way which causes power – CONTINUED – Power Steering 333 7 Starting and Operating assist limitation to occur too frequently, this may result in a malfunction of the power steering control system. 7-10. Braking s07ak & Braking Tips s07ak01 WARNING Never rest your foot on the brake pedal while driving. This can cause dangerous overheating of the brakes and needless wear on the brake pads. ! When the brakes get wet s07ak0101 When driving in rain or after washing the vehicle, the brakes may get wet. As a result, brake stopping distance will be longer. To dry the brakes, drive the vehicle at a safe speed while lightly depressing the brake pedal to heat up the brakes. ! Use of engine braking s07ak0102 Remember to make use of engine braking in addition to foot braking. When descending a grade, if only the foot brake is used, the brakes may start working improperly because of brake fluid overheating, caused by overheated brake pads. To help prevent this, shift into a lower gear to get stronger engine braking. ! Braking when a tire is punctured s07ak0103 Do not depress the brake pedal suddenly when a tire is punctured. This could cause a loss of control of the vehicle. Keep driving straight ahead while gradually reducing speed. Then slowly pull off the road to a safe place. & Brake System s07ak02 ! Two separate circuits s07ak0201 Your vehicle has a dual circuit brake system. Each circuit works diagonally across the vehicle. If one circuit of the brake system should fail, the other half of the system still works. If one circuit fails, the brake pedal will go down much closer to the floor than usual and you will need to press it down much harder. And a much longer distance will be needed to stop the vehicle. ! Electronic brake booster s07ak0207 The vehicle is equipped with an electronic brake booster to provide additional braking force. Do not turn off the ignition switch while driving because that will turn off the brake booster, resulting in poor braking power. The brakes will continue to work even when the brake booster completely stops functioning. If this happens, you will have to depress the pedal much harder than during normal braking, and the braking distance will increase. 334 Braking NOTE When the following operations are performed, an operating sound from the electronic brake boost control module may be heard. This is not a malfunction. . The brake pedal was operated. . The driver’s door was opened. . The EyeSight function was activated. . Several minutes have passed after the engine stopped. ! Supplemental booster function when pressure fails s07ak020701 If there is a malfunction in the braking system, the power for the braking will be stored by controlling the hydraulic pressure of the VDC system. When the brake pedal is depressed while the supplemental booster function is operating, an operation sound and brake pedal vibration may be generated. ! Brake assist system s07ak0203 WARNING Do not be overconfident about the brake assist. It is not a system that brings more braking ability to the vehicle beyond its braking capability. Always use the utmost care when driving regarding vehicle speed and safe distance. CAUTION When you need to brake suddenly, continue depressing the brake pedal strongly to bring the effect of the brake assist. Brake assist is a driver assistance system. It assists the brake power when the driver cannot depress the brake pedal strongly and the brake power is insufficient. Brake assist generates the brake power according to the speed at which the driver depresses the brake pedal. NOTE When you depress the brake pedal strongly or suddenly, the following phenomena occur. However, even though these occur, they do not indicate any malfunctions, and the brake assist system is operating properly. . You might feel that the brake pedal is applied by lighter force and generates a greater braking force. . You might hear the sound of ABS operating from the engine compartment. & Disc Brake Pad Wear Warning Indicators s07ak03 The disc brake pad wear warning indicators on the disc brakes give a warning noise when the brake pads are worn. If a squeaking or scraping noise is heard from the disc brakes while braking, immediately have your vehicle inspected by the nearest SUBARU dealer. Braking 335 7 Starting and Operating 7-11. ABS (Anti-Lock Brake System) s07al WARNING Always use the utmost care in driving – overconfidence because you are driving with an ABS equipped vehicle could easily lead to a serious accident. CAUTION . The ABS does not always decrease stopping distance. You should always maintain a safe following distance from other vehicles. . When driving on badly surfaced roads, gravel roads, icy road, or over newly fallen snow, stopping distances may be longer for a vehicle with the ABS than one without. When driving under these conditions, therefore, reduce your speed and leave ample distance from other vehicles. . When you feel the ABS operating, you should maintain constant brake pedal pressure. Do not pump the brake pedal since doing so may defeat the operation of the ABS. The ABS prevents the lock-up of wheels which may occur during sudden braking or braking on slippery road surfaces. This helps prevent the loss of steering control and directional stability caused by wheel lock-up. When the ABS is operating, you may hear a chattering noise or feel a slight vibration in the brake pedal. This is normal when the ABS operates. The ABS will not operate when the vehicle speed is below approximately 6 mph (10 km/h). & ABS Self-Check s07al01 You may feel a slight shock in the brake pedal and hear the operating noise of the ABS from the engine compartment just after the vehicle is started. This is caused by an automatic functional test of the ABS being carried out and does not indicate any abnormal condition. & ABS Warning Light s07al02 Refer to “ABS Warning Light” P164. 7-12. Electronic Brake Force Distribution (EBD) System s07am The EBD system maximizes the effectiveness of the brakes by allowing the rear brakes to supply a greater proportion of the braking force. It functions by adjusting the distribution of braking force to the rear wheels in accordance with the vehicle’s loading condition and speed. The EBD system is an integral part of the ABS and uses some of the ABS components to perform its function of optimizing the distribution of braking force. If any of the ABS components used by the EBD function fails, the EBD system also stops working. When the EBD system is operating, you may hear a chattering noise or feel a slight vibration in the brake pedal. This is normal and does not indicate a malfunction. 336 ABS (Anti-Lock Brake System) & EBD System Malfunctions s07am01 If a malfunction occurs in the EBD system, the system stops working and the following warning lights illuminate simultaneously. . Brake system warning light . ABS warning light . Vehicle Dynamics Control warning light If all of the warning lights remain on even though the parking brake is released, the brake fluid level may be low or there could be a problem with the EBD system. Park the vehicle in a safe place immediately and contact a SUBARU dealer. WARNING . Driving with the brake system warning light on is dangerous. This indicates your brake system may not be working properly. If the light remains on, have the brakes inspected by a SUBARU dealer immediately. . If at all in doubt about whether the brakes are operating properly, do not drive the vehicle. Have your vehicle towed to the nearest SUBARU dealer for repair. 7-13. Vehicle Dynamics Control System s07an WARNING Always use the utmost care in driving – overconfidence because you are driving with a Vehicle Dynamics Control system equipped vehicle could easily lead to a serious accident. CAUTION . Even if your vehicle is equipped with Vehicle Dynamics Control system, winter tires should be used when driving on snow-covered or icy roads; in addition, vehicle speed should be reduced considerably. Simply having a Vehicle Dynamics Control system does not guarantee that the vehicle will be able to avoid accidents in any situation. . Activation of the Vehicle Dynamics Control system is an indication that the road being traveled on has a slippery surface; since having Vehicle Dy- – CONTINUED – Vehicle Dynamics Control System 337 7 Starting and Operating namics Control is no guarantee that full vehicle control will be maintained at all times and under all conditions, its activation should be seen as a sign that the speed of the vehicle should be reduced considerably. . Whenever suspension components, steering components, or an axle are removed from a vehicle equipped with the Vehicle Dynamics Control system, have an inspection of that system performed by an authorized SUBARU dealer. . The following precautions should be observed in order to ensure that the Vehicle Dynamics Control system is operating properly. – All four wheels should be fitted with tires of the same size, type, and brand. Furthermore, the amount of wear should be the same for all four tires. – Keep the tire pressure at the proper level as shown on the tire inflation pressure label attached to the driver’s side door pillar. – When replacing a flat tire, use only the specified temporary spare tire. However, even with the specified temporary spare tire, the effectiveness of the Vehicle Dynamics Control system will be reduced. . If non-matching tires are used, the Vehicle Dynamics Control system may not operate correctly. In the event of wheelspin and/or skidding on a slippery road surface and/or during cornering and/or an evasive maneuver, the Vehicle Dynamics Control system adjusts the engine’s output and the wheels’ respective braking forces to help maintain traction and directional control. . Traction Control Function The traction control function is designed to prevent spinning of the driving wheels on slippery road surfaces, thereby helping to maintain traction and directional control. Activation of this function is indicated by flashing of the Vehicle Dynamics Control operation indicator light. . Skid Suppression Function The skid suppression function is designed to help maintain directional stability by suppressing the wheels’ tendency to slide sideways during steering operations. Activation of this function is indicated by flashing of the Vehicle Dynamics Control operation indicator light. NOTE . The Vehicle Dynamics Control system may be considered normal when the following conditions occur. – Slight twitching of the brake pedal is felt. – The vehicle or steering wheel shakes to a small degree. – An operating noise from the engine compartment is heard briefly when starting the engine and when driving off after starting the engine. – The brake pedal seems to jolt when driving off after starting the engine. . In the following circumstances, the vehicle may be less stable than it feels to the driver. The Vehicle Dynamics Control System may therefore operate. Such operation does not indicate a system malfunction. – On gravel-covered or rutted roads – On unfinished roads – When the vehicle is towing a trailer 338 Vehicle Dynamics Control System – When the vehicle is fitted with snow tires or winter tires . Activation of the Vehicle Dynamics Control system will cause operation of the steering wheel to feel slightly different compared to that for normal conditions. . It is always important to reduce speed when approaching a corner, even if the vehicle is equipped with Vehicle Dynamics Control. . Always turn off the engine before replacing a tire as failure to do so may render the Vehicle Dynamics Control system unable to operate correctly. & Vehicle Dynamics Control System Monitor s07an01 Refer to “Vehicle Dynamics Control Warning Light/Vehicle Dynamics Control Operation Indicator Light” P169 and “Vehicle Dynamics Control OFF Indicator Light” P170. & To Turn On/Off the Vehicle Dynamics Control System s07an07 To turn the Vehicle Dynamics Control on and off, operate the center information display. Refer to “Car settings” P203 (11.6-inch display models) or “Vehicle setting icons” P221 (dual 7.0-inch display models). Creating an adequate driving wheel slip by deactivating the Vehicle Dynamics Control system temporarily may help to escape from the following situations. Turn the Vehicle Dynamics Control system off when necessary. . A standing start on a steeply sloping road with a snowy, gravel-covered, or otherwise slippery surface . Extrication of the vehicle when its wheels are stuck in mud or deep snow When turning off the Vehicle Dynamics Control system during engine operation, the Vehicle Dynamics Control OFF indicator light on the combination meter illuminates. The Vehicle Dynamics Control system will be deactivated. When “Vehicle Dynamics Control” has been touched again to reactivate the Vehicle Dynamics Control system, the Vehicle Dynamics Control OFF indicator light turns off. You should not deactivate the Vehicle Dynamics Control system except under the above-mentioned situations. CAUTION The Vehicle Dynamics Control system helps prevent unstable vehicle motion such as skidding using control of the brakes and engine power. Do not turn off the Vehicle Dynamics Control system unless it is absolutely necessary. If you must turn off the Vehicle Dynamics Control system, drive very carefully based on the road surface condition. NOTE . When “Vehicle Dynamics Control” has been touched to deactivate the Vehicle Dynamics Control system, the Vehicle Dynamics Control system automatically reactivates itself the next time the ignition switch is turned to the “OFF” position and the engine is restarted. . When “Vehicle Dynamics Control” has been touched to deactivate the Vehicle Dynamics Control system, the vehicle’s running performance is comparable with that of a vehicle that does not have a Vehicle Dynamics Control system. Do not deactivate the Vehicle Dynamics Control system except when absolutely necessary. . Even when the Vehicle Dynamics Control system is deactivated, components of the brake control system may still activate. When the brake control system is activated, the – CONTINUED – Vehicle Dynamics Control System 339 7 Starting and Operating Vehicle Dynamics Control operation indicator light flashes. 7-14. X-MODE s07bi WARNING . Always use the utmost care in driving – overconfidence because you are driving a vehicle with X-MODE could easily lead to a serious accident. . Always use the utmost care in driving – overconfidence because you are driving a vehicle with hill descent control function could easily lead to a serious accident. Be especially careful, and depress the brake pedal if necessary when driving on extremely steep downhill, frozen, muddy or sandy roads. Failure to control the vehicle’s speed may cause a loss of control and result in a serious accident. CAUTION . Even if your vehicle is equipped with X-MODE, winter tires should be used when driving on snowcovered or icy roads; in addition, vehicle speed should be reduced considerably. Simply having X-MODE does not guarantee that the vehicle will be able to avoid accidents in any situation. . Activate X-MODE when you encounter a very slippery surface at low speed. However, having X-MODE is no guarantee that full vehicle control will be maintained at all times and under all conditions. When activating X-MODE, the speed of the vehicle should be reduced considerably. . Whenever suspension components, steering components, or an axle are removed from a vehicle, have the system inspected by an authorized SUBARU dealer. . Observe the following precautions in order to ensure that X-MODE is operating properly: – All four wheels should be fitted with tires of the same size, type, and brand. Furthermore, the amount of wear should be the same for all four tires. – Keep the tire pressure at the proper level as shown on the label attached to the vehicle’s door pillar. 340 X-MODE – Use only the special temporary spare tire to replace a flat tire. With a normal temporary spare tire, the effectiveness of X-MODE is reduced and this should be taken into account when driving the vehicle in such a condition. . If the hill descent control function has operated continuously for a long time, the temperature of the brake disc may increase and the hill descent control function may be temporarily disabled. In this case, the hill descent control indicator light will disappear. When the hill descent control indicator light disappears, the hill descent control function is disabled. X-MODE is the integrated control system of the engine, AWD and Vehicle Dynamics Control system, etc. for driving with bad road conditions. Using X-MODE, you can drive more comfortably even in slippery road conditions including uphill and downhill. X-MODE has the following functions. . Hill descent control function: Using the hill descent control function, you can keep the vehicle at a consistent speed driving downhill. If the vehicle speed is likely to increase, the brake control system will be activated to adjust the vehicle speed. . Driving ability control: This mode increases the hill-climbing ability and driving ability as well as enabling smooth application of torque for easier control of the steering wheel. & To Activate/Deactivate X-MODE s07bi01 X-MODE indicator (models with 1 mode) 1 X-MODE indicator X-MODE indicator (models with 2 modes) 1 DEEP SNOW/MUD mode indicator 2 SNOW/DIRT mode indicator To activate or deactivate X-MODE, operate the center information display. Refer to “Car settings” P203 (11.6-inch display models) or “Vehicle setting icons” P221 (dual 7.0-inch display models). NOTE . Even if you try to activate X-MODE when the vehicle speed is 12 mph (20 km/h) or more, X-MODE will not be activated. At this time, a buzzer will sound twice. . If the vehicle speed reaches 25 mph (40 km/h) or more while X-MODE is activated, a buzzer will sound once and X-MODE will be deactivated. – CONTINUED – X-MODE 341 7 Starting and Operating X-MODE will automatically reactivate when the vehicle speed drops below 22 mph (35 km/h). – When you use the cruise control after X-MODE is automatically deactivated, X-MODE will not be automatically reactivated when the vehicle speed drops below 22 mph (35 km/h). . While the engine is running, if any of the following conditions is met, X-MODE will be deactivated. In this case, it is not possible to activate X-MODE. Also, the SI-DRIVE mode will change to the Intelligent (I) mode and it will not be possible to change to the other modes. – The CHECK ENGINE warning light/Malfunction indicator light illuminates. – The AT OIL TEMP warning light flashes. – The ABS warning light illuminates. – The Vehicle Dynamics Control warning light illuminates. . The Auto Start Stop system will be stopped while X-MODE is activated. . If there is a possibility that the engine could overheat because of a temperature increase of the engine coolant, it is not possible to activate X-MODE. Even while X-MODE is activated, X-MODE will be deactivated when the engine coolant temperature increases. In this case, the SI-DRIVE mode will change to the Intelligent (I) mode. . The SI-DRIVE mode will not be affected even if the SI-DRIVE switch is pressed while X-MODE is activated. At this time, the buzzer will sound twice. Models with 2 modes: . SNOW/DIRT is suitable for driving on a snow-covered road where the points of contact between the tires and road surface are visible, or for driving on an unpaved road. . DEEP SNOW/MUD is suitable for driving on a road covered with deep snow where the points of contact between the tires and road surface are not visible, or for driving on a muddy road. & Hill Descent Control Function s07bi03 The hill descent control function will be in standby mode when X-MODE is activated and the vehicle speed is less than approximately 12 mph (20 km/h). The function will operate when the vehicle speed is less than approximately 12 mph (20 km/h) and the accelerator ratio is less than approximately 10%. The function will turn off when the vehicle speed is more than approximately 12 mph (20 km/h) and the accelerator pedal is depressed. CAUTION The braking power of the hill descent control function may not be sufficient when strong braking power is needed (e.g., when towing a trailer). NOTE . Even while the hill descent control function is operating, you can vary the vehicle speed using the brake pedal or accelerator pedal. . During braking by the hill descent control function, the stop lights will illuminate. 342 X-MODE . The hill descent control function is operable regardless of the gradient of the road. . The hill descent control function may be considered normal when the following conditions occur. – An operating sound is heard briefly from the engine compartment while the hill descent control function is operating. – The sensation of depressing the brake pedal is different, (harder than usual etc.) when the brake pedal is depressed during hill descent control function operation. ! Hill descent control indicator light s07bi0301 This indicator appears while the hill descent control function is in the standby mode. It flashes while the function is operating. It will disappear when the function is in the disabled mode. When this function is changed from operational to non-operational, it will disappear when the vehicle speed reaches more than approximately 18 mph (30 km/h). 7-15. Tire Pressure Monitoring System (TPMS) (U.S.- Spec. Models) s07ao Low tire pressure warning light The tire pressure monitoring system provides the driver with a warning message by sending a signal from a sensor that is installed in each wheel when tire pressure is severely low. The tire pressure monitoring system will activate only when the vehicle is driven at speeds above 20 mph (32 km/h). Also, this system may not react immediately to a sudden drop in tire pressure (for example, a blow-out caused by running over a sharp object). – CONTINUED – Tire Pressure Monitoring System (TPMS) (U.S.-Spec. Models) 343 7 Starting and Operating WARNING . If the low tire pressure warning light illuminates while driving, never brake suddenly. Instead, perform the following procedure. Otherwise an accident involving serious vehicle damage and serious personal injury could occur. (1) Keep driving straight ahead while gradually reducing speed. (2) Slowly pull off the road to a safe place. (3) Check the pressure for all four tires and adjust the pressure to the COLD tire pressure shown on the tire inflation pressure label on the door pillar on the driver’s side. Even when the vehicle is driven a very short distance, the tires get warm and their pressures increase accordingly. Be sure to let the tires cool thoroughly before adjusting their pressures to the standard values shown on the tire inflation pressure label. Refer to “Tires and Wheels” P474. The tire pressure monitoring system does not function when the vehicle is stationary. After adjusting the tire pressures, increase the vehicle speed to at least 20 mph (32 km/h) to start the TPMS rechecking of the tire inflation pressures. If the tire pressures are now above the severe low pressure threshold, the low tire pressure warning light should turn off a few minutes later. If this light still illuminates while driving after adjusting the tire pressure, a tire may have significant damage and a fast leak that causes the tire to lose air rapidly. If you have a flat tire, refer to “Flat Tires” P429. . When a replacement tire is mounted or a wheel rim is replaced without the original pressure sensor/transmitter being transferred, the low tire pressure warning light will illuminate steadily after blinking for approximately one minute. This indicates the TPMS is unable to monitor all four road wheels. Contact your SUBARU dealer as soon as possible for tire and sensor replacement and/or system resetting. CAUTION Do not place metal film or any metal parts under the driver’s seat. This may cause poor reception of the signals from the tire pressure sensors, and the tire pressure monitoring system will not function properly. & Certification for Tire Pressure Monitoring System s07ao01 ! U.S.-spec. models s07ao0101 CAUTION FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including 344 Tire Pressure Monitoring System (TPMS) (U.S.-Spec. Models) interference that may cause undesired operation. & TPMS Screen s07ao05 This screen displays each tire pressure. Refer to “Basic Screens” P185. 7-16. Parking Your Vehicle s07ap WARNING . Never leave unattended children or pets in the vehicle. They could accidentally injure themselves or others through inadvertent operation of the vehicle. Also, on hot or sunny days, the temperature in a closed vehicle could quickly become high enough to cause severe or possibly fatal injuries to them. . Do not park the vehicle over flammable materials such as dry grass, waste paper or rags, as they may burn easily if they come near hot engine or exhaust system parts. . Be sure to stop the engine if you take a nap in the vehicle. If engine exhaust gas enters the passenger compartment, occupants in the vehicle could die from carbon monoxide (CO) contained in the exhaust gas. & Electronic Parking Brake s07ap03 1 Electronic parking brake switch 2 Indicator light 3 Release the electronic parking brake 4 Apply the electronic parking brake WARNING . Before exiting the vehicle, make sure that you turn off the engine. Otherwise, the parking brake may be released and an accident may occur. . If the brake system warning light turns on, the electronic parking brake system may be malfunctioning. Immediately stop your vehicle in a safe location, use tire stops under the tires to prevent – CONTINUED – Parking Your Vehicle 345 7 Starting and Operating the vehicle from moving and contact your SUBARU dealer. . If the electronic parking brake is operated under the following conditions, the electronic parking brake indicator light may flash. – The brake is overheated. – The vehicle is on a steep slope. In such cases, the vehicle may start to move which may lead to an accident. Always use the tire stops. CAUTION . When the electronic parking brake cannot be applied due to a malfunction, contact your SUBARU dealer immediately for an inspection. If you have to park your vehicle in such conditions, perform the following procedure. – Stop your vehicle in a flat location. – Shift the select lever in the “P” position. When the select lever cannot be shifted into the “P” position, you must release shift lock. Refer to “Shift Lock Function” P328. – Use tire stops under the tires to prevent the vehicle from moving. . Never drive with the parking brake applied. Doing so will cause unnecessary brake pad wear. Before driving off, always make sure that the parking brake has been released and the brake system warning light has turned off. . The braking power of the parking brake may not be sufficient when stronger braking power is needed (e.g., when parking on a steep slope while towing a trailer). Your vehicle is equipped with an electronic parking brake. You can apply/release the parking brake by operating the parking brake switch. To apply: Depress the brake pedal and pull up the parking brake switch. To release: Press the parking brake switch firmly while the ignition switch is in the “ON” position and the brake pedal is depressed. Electronic parking brake indicator light When the parking brake is applied while the ignition switch is in the “ON” position, the following indicator lights illuminate. . The indicator light on the parking brake switch . The electronic parking brake indicator light on the combination meter (for details, refer to “Electronic Parking Brake Indicator Light” P166.) NOTE . The parking brake will not be released under the following conditions even if the parking brake switch is pressed. – The ignition switch is in the “ACC” or “LOCK”/“OFF” position. 346 Parking Your Vehicle – The brake pedal is not depressed. . The electronic parking brake system uses motors to apply the parking brake. Therefore, operating sounds from the motors will be heard when applying or releasing the parking brake. Make sure that the motor sounds are heard when applying or releasing the parking brake. . When the electronic parking brake system has a malfunction or the electronic parking brake operation is prohibited temporarily, if the parking brake switch is operated, a chirp sound is heard and the electronic parking brake indicator light flashes. . When you cannot release the parking brake due to, for example, a system malfunction, contact your SUBARU dealer and have your SUBARU dealer release the parking brake. . If the operation of the electronic parking brake switch is stopped midway or performed extremely slowly, the system may detect an error and turn on the brake system warning light. However, this does not indicate a malfunction if the warning light turns off after operating the switch. . When the electronic parking brake has not been used for a long period of time, the electronic parking brake may operate automatically after the ignition switch is turned to the “LOCK”/“OFF” position. This occurs due to checking the proper operation of the electronic parking brake and does not indicate a malfunction. . If the electronic parking brake switch is malfunctioning and the electronic parking brake cannot be released, refer to the instructions described in “Automatic release function by accelerator pedal” P347. . After activating the electronic parking brake, you may hear a short sound several minutes after the electronic parking brake indicator light and the indicator light on the electronic parking brake switch illuminate as the system confirms proper engagement. This sound is different from the apply and release sound. This can occur: – If the brakes are extremely hot. – If the car is parked on a steep incline. – If the electronic parking brake is applied after the ignition switch is turned OFF. This is a normal operating sound under any of these conditions. . The Auto Start Stop system is deactivated while the electronic parking brake is applied. . If you operate the electronic parking brake switch while the Auto Start Stop system is activated, the Auto Start Stop system will be deactivated. The electronic parking brake will activate after the engine is restarted. After the electronic parking brake indicator light is illuminated, release your foot from the brake pedal. . When starting the engine or restarting the engine using the Auto Start Stop system, if you operate the electronic parking brake switch, the electronic parking brake indicator light may flash temporarily. However, this is not a malfunction if the light turns off after the electronic parking brake is deactivated. ! Automatic release function by accelerator pedal s07ap0301 The electronic parking brake system has an automatic release function. The parking brake will be automatically released by – CONTINUED – Parking Your Vehicle 347 7 Starting and Operating depressing the accelerator pedal. However, the automatic release function does not operate under the following conditions. . Any door (other than the rear gate) is open. . The driver’s seatbelt is not fastened. If the parking brake is automatically released, the electronic parking brake indicator light and the indicator light on the parking brake switch turn off. NOTE Even if you have applied the parking brake, the parking brake will be automatically released when the accelerator pedal is depressed. ! Auto Vehicle Hold function s07ap0305 The Auto Vehicle Hold function will automatically keep the vehicle stopped even after releasing the brake pedal when the vehicle is at a complete stop, such as at traffic signals. WARNING . Do not use the Auto Vehicle Hold function on a steep hill or slippery road. The vehicle may move even when using the Auto Vehicle Hold function, causing serious injury or accidents. . Do not use the Auto Vehicle Hold function to park the vehicle. The vehicle may move unexpectedly, causing serious injury or accidents. Make sure to shift the select lever to the “P” position and apply the electronic parking brake in the following cases. – When you are going to park your vehicle. – When passengers are getting in or out of the vehicle. – When you are loading or unloading. . When using the Auto Vehicle Hold function, do not release the brake pedal before the Auto Vehicle Hold indicator illuminates. The vehicle may move unexpectedly, causing serious injury or accidents. . Deactivate the Auto Vehicle Hold function in the following cases. Otherwise, the vehicle may move unexpectedly, causing serious injury or accidents. – When washing your vehicle in an automatic car wash – When being towed CAUTION . When stopping on a steep slope with the Auto Vehicle Hold function turned on, the electronic parking brake may be automatically applied. Then the electronic parking brake indicator light will flash. In such a case, depress and hold the brake pedal while stopping. Otherwise, the vehicle may move. . When being towed, turn off the Auto Vehicle Hold function. NOTE We recommend turning on the Auto Vehicle Hold function when stopping on an incline. If the Auto Vehicle Hold function is turned off, the vehicle may roll backward when driving off. 348 Parking Your Vehicle ! To turn on/off the Auto Vehicle Hold function s07ap030501 Auto Vehicle Hold indicator light To turn the Auto Vehicle Hold function on and off, operate the center information display. Refer to “Car settings” P203 (11.6-inch display models) or “Vehicle setting icons” P221 (dual 7.0-inch display models). When the Auto Vehicle Hold function is turned ON, the Auto Vehicle Hold indicator light will turn on. NOTE . When the electronic parking brake system has a malfunction while the Auto Vehicle Hold function is turned on, a chirp will sound, the Auto Vehicle Hold indicator light will turn off and the brake system warning light will turn on. . Every time when starting the engine, the Auto Vehicle Hold function will be set to “OFF”. ! To operate the Auto Vehicle Hold function s07ap030503 Stop the vehicle by depressing the brake pedal when all of the following conditions are met. Then the Auto Vehicle Hold function will operate. . Driver’s door is closed. . The driver’s seatbelt is fastened. . The select lever is in a position other than the “P” position. Auto Vehicle Hold indicator light While the vehicle is kept stopped by the Auto Vehicle Hold function, the Auto Vehicle Hold indicator light will flash. ! To release the Auto Vehicle Hold function s07ap030504 Perform any of the following operations to release the Auto Vehicle Hold function. . Depress the accelerator pedal. . Depress the brake pedal again. . Apply the electronic parking brake. . Shift the select lever to the “P” position with the brake pedal pressed. . Deactivate the Auto Vehicle Hold function operating with the center information display while depressing the brake pedal. When the Auto Vehicle Hold function is released, the Auto Vehicle Hold indicator light will change from flashing to illuminated. Under any of the following conditions, the Auto Vehicle Hold function will be automatically released and the electronic parking brake will be automatically applied. . The Auto Vehicle Hold function has been in operation for 10 minutes. . The driver’s seatbelt is unfastened. . The ignition switch is turned to the – CONTINUED – Parking Your Vehicle 349 7 Starting and Operating “LOCK”/“OFF” position. . The vehicle is stopped on a steep slope. . The Auto Vehicle Hold function is malfunctioning. In such cases, the Auto Vehicle Hold indicator light will turn off and the electronic parking brake indicator light will illuminate. ! Tips s07ap030505 . When the electronic parking brake is automatically applied with the vehicle kept stopped by the Auto Vehicle Hold function, release the electronic parking brake by either of the following operations before starting off. Then make sure that the electronic parking brake indicator light is off. – Depress the accelerator pedal with the driver’s seatbelt fastened and with the doors closed. – Press the electronic parking brake switch with the brake pedal depressed. . Under certain conditions, including a malfunction of the Auto Vehicle Hold, a warning buzzer will sound and a warning message will appear on the combination meter display (color LCD). All warning messages should be strictly observed. . On a steep slope, the vehicle cannot be kept stopped by the Auto Vehicle Hold function. In such a case, depress and hold the brake pedal. . When stopping on a steep slope with the Auto Vehicle Hold function activated, the electronic parking brake may be automatically applied after stopping, then the electronic parking brake indicator light may flash. In such a case, depress and hold the brake pedal while stopped. Otherwise, the vehicle may move. When getting out of the vehicle, stop the vehicle on a flat surface, then apply the electronic parking brake. . If the Auto Vehicle Hold indicator light does not illuminates even after touching “Auto Vehicle Hold (AVH)” with the operating conditions met, the function may have a malfunction. Contact your SUBARU dealer for an inspection. . You may hear a sound while the Auto Vehicle Hold function is keeping your vehicle stopped. This is normal, and does not represent a malfunction. . When you depress the brake pedal to release the Auto Vehicle Hold function, an operation sound or vibration may be generated, or the brake pedal may return slowly. This is not a malfunction. . While the vehicle is kept stopped by the Auto Vehicle Hold function, the brake pedal may feel stiff. However, this is not a malfunction. . When using the Auto Vehicle Hold function, depress the brake pedal firmly. Otherwise, the Auto Vehicle Hold may not operate. ! Emergency brake s07ap0303 CAUTION Use the emergency brake only in case of an emergency. If the emergency brake is excessively used, the brake parts will wear down faster or the brake may not work sufficiently due to brake overheating. NOTE . While using the emergency brake, the electronic parking brake indicator light and the indicator light on the parking brake switch illuminate and a chirp sounds. . While using the emergency brake, a sound may be heard from the engine compartment. This is the operating sound of the brake that is activated by the Vehicle Dynamics Control system, and does not indicate a malfunction. 350 Parking Your Vehicle If the foot brake has a malfunction, you can stop the vehicle by pulling the parking brake switch continuously. While applying the emergency brake, the electronic parking brake indicator light and the indicator light on the parking brake switch illuminate and a chirp sounds. ! Electronic parking brake system warning s07ap0304 CAUTION If the brake system warning light turns on, the electronic parking brake system may be malfunctioning. Immediately stop your vehicle in the nearest safe location and contact your SUBARU dealer. If a malfunction occurs in the electronic parking brake system, the brake system warning light turns on. Refer to “Electronic parking brake system warning” P166. & Parking Tips s07ap02 When parking your vehicle, always perform the following items. . Apply the parking brake. . Place the select lever in the “P” (Park) position. Never rely on the transmission alone to hold the vehicle. When parking on a hill, always turn the steering wheel as described here. When the vehicle is headed up the hill, the front wheels should be turned away from the curb. When facing downhill, the front wheels should be turned into the curb. CAUTION If your vehicle has a bumper under guard (optional), pay attention to blocks and other obstructions on the ground when parking. The underspoiler could be damaged by contact with them. Parking Your Vehicle 351 7 Starting and Operating 7-17. Hill Start Assist System s07au CAUTION . The Hill start assist system is a device only for helping the driver to START the vehicle on an uphill grade. To prevent accidents when the vehicle is parked on a slope, be sure to firmly set the parking brake. When setting the parking brake, make sure that the vehicle remains stationary when the brake pedal is released. . Do not turn the ignition switch to the “OFF” position while the Hill start assist system is operating. The Hill start assist system will deactivate, causing an accident. The Hill start assist system is a device to make the following vehicle operations easier. NOTE . The Hill start assist system will activate when the Auto Vehicle Hold function is deactivated. . The Hill start assist system will deactivate when the Auto Vehicle Hold function is activated. 1 Starting forward facing uphill 2 Starting backward facing downhill A Brake pedal In both these cases, the Hill start assist system operates under the following condition. . When the vehicle has stopped with the brake pedal depressed. Braking power is maintained temporarily (for approximately 2 seconds) by the Hill start assist system after the brake pedal is released. The driver is therefore able to start the vehicle in the same way as on a level grade, just using the accelerator pedal. If the braking power of the Hill start assist system is insufficient after the brake pedal is released, apply more braking power by depressing the brake pedal again. The Hill start assist system may not operate on slight grades. Also, the Hill start assist system does not operate in the following cases. 352 Hill Start Assist System . When starting backward facing uphill . When starting forward facing downhill . While the parking brake is applied . While the ignition switch is in the “ACC” or “OFF” position . While the Vehicle Dynamics Control warning light is illuminated. Refer to “Vehicle Dynamics Control Warning Light/Vehicle Dynamics Control Operation Indicator Light” P169. . While the Auto Start Stop warning light is illuminated. Refer to “Auto Start Stop Warning Light (Yellow)” P177. When using the Hill start assist system, a braking effect may be felt even after the brake pedal has been released. CAUTION The braking power of the Hill start assist system may not be sufficient when strong braking power is needed (e.g., when towing a trailer). NOTE A slight jolt may be felt when the vehicle begins to move forward after being reversed. 7-18. Auto Start Stop System s07bh The Auto Start Stop system is designed to automatically stop and restart the engine when the vehicle is stationary for a short period of time (while waiting for a traffic light or in a traffic jam) after the engine has warmed up. The system operates in order to reduce fuel consumption, exhaust emissions and undesired idling noise. & System Operation s07bh01 WARNING Turn off the Auto Start Stop system before towing the vehicle. CAUTION The Auto Start Stop system is designed to automatically stop and restart the engine for a short period of time during idling. Do not use the system when parking the vehicle normally. So that it can be used safely and comfortably, in addition to driver operations, the Auto Start Stop system is designed to constantly monitor the vehicle conditions – CONTINUED – Auto Start Stop System 353 7 Starting and Operating as well as the environment inside and outside the vehicle, in order to control stopping and restarting of the engine. After the vehicle has been completely stopped by depressing the brake pedal with the select lever in the “D” position, the engine will be automatically stopped. If you release the brake pedal with the select lever kept in the “D” position, the engine will be automatically restarted. However, when the Auto Vehicle Hold indicator light illuminates, the engine will not restart. Auto Start Stop indicator light (green) If the engine is temporarily stopped by the system, the Auto Start Stop indicator light on the combination meter will illuminate in green. This indicator light will turn off when the system restarts the engine. NOTE . After starting the engine, if the vehicle is left idling without being driven, the Auto Start Stop system will not operate. . Your vehicle is equipped with a special high-performance battery. When replacing the vehicle battery, be sure to replace it with a genuine SUBARU battery (or equivalent) designed specifically for use in a vehicle equipped with the Auto Start Stop system. For details, consult your SUBARU dealer. ! Operational conditions s07bh0105 The engine can be automatically stopped by the Auto Start Stop system when all of the following conditions are met. . The engine is sufficiently warmed up. . The engine hood is closed. . The driver’s door is closed. . The driver’s seatbelt is fastened. . The CHECK ENGINE warning light/ malfunction indicator light is off.*1 . The airflow mode selection is set to a mode other than “ ” mode. . The rear window defogger is not in use. . X-MODE has been turned off. After the vehicle is stopped, the engine will be automatically stopped when the following conditions are met. . The steering wheel is in the straight ahead position. . The steering wheel is not being operated. *1: Even if the CHECK ENGINE warning light/ malfunction indicator light is illuminated, the Auto Start Stop system may operate when the system recovers from the malfunction. NOTE . After the vehicle is stopped, the engine may not automatically stop under the following conditions. – The vehicle is stopped on a road with a steep slope. – The vehicle is stopped by hard braking. . After the vehicle is stopped, the engine may not automatically stop if the brake pedal is not fully depressed. Make sure to depress the brake pedal firmly when stopping the vehicle. . In the following cases, it may take some time for the Auto Start Stop system to operate. – When the battery is discharged because the vehicle has not been 354 Auto Start Stop System used for a long period of time, etc. – The coolant temperature is low. – When the battery terminals have been reconnected after replacing the battery, etc. ! Non-operational conditions s07bh0106 In any of the following cases, the Auto Start Stop system will not operate. . When the Auto Start Stop warning light/ Auto Start Stop OFF indicator light is illuminating. . When the CHECK ENGINE warning light/malfunction indicator light is illuminating.* 1 . The electronic parking brake is applied. . When the engine hood is opened. . When the CVT fluid is not sufficiently warmed up. . When the temperature of the CVT fluid is abnormally high. . When the vehicle battery is not in good condition. . When using the climate control system, the temperature difference between the setting temperature and the temperature inside the vehicle is significant. . When using the climate control system, the amount of air flow is significant. *1: Even if the CHECK ENGINE warning light/ malfunction indicator light is illuminated, the Auto Start Stop system may operate when the system recovers from the malfunction. NOTE The Auto Start Stop system may not operate in the following cases: . The CHECK ENGINE warning light/ malfunction indicator light or other warning lights on the combination meter are illuminated or flashing. . You are driving the vehicle in a highelevation area. ! Engine restart operational conditions s07bh0107 In any one of the following cases, the engine will be automatically restarted even if the brake pedal is kept depressed. . When slightly releasing the brake pedal on road with a steep slope and the vehicle begins rolling. . When further depressing the brake pedal. . When depressing the accelerator pedal. . When you move the select lever to the “R” position. . When turning the steering wheel. . When operating the electronic parking brake switch. . When activating X-MODE. . When the air flow mode selection set to “ ” mode. . When the climate control system can no longer maintain the set temperature. . When unbuckling the driver’s seatbelt. . When opening the driver’s door. . When activating the rear window defogger. . When the Auto Vehicle Hold function is released, refer to “Auto Vehicle Hold function” P348. ! Engine restart non-operational conditions s07bh0108 WARNING Do not open the engine hood when the Auto Start Stop system is in operation. It may cause the vehicle to move while on a slope, the steering wheel operation may become heavy, or the brakes may not work well, which can create dangerous conditions. To ensure safety, the engine will not be automatically restarted if the engine hood is opened when the Auto Start Stop system is in operation, even if the brake – CONTINUED – Auto Start Stop System 355 7 Starting and Operating pedal is released. In this case, check the surrounding area and restart the engine by normal operation. Also, when the Auto Vehicle Hold operation indicator light is illuminated, the engine will not restart. NOTE . When the Auto Start Stop system is in operation, the brake pedal may feel stiff. However, this is not a malfunction. . When the battery is discharged, the engine will be automatically restarted even if you keep the brake pedal depressed. . In the following cases, the length of time that the engine is temporarily stopped by the Auto Start Stop system may be shorter. – When the climate control system is in operation. – When the outside temperature is high, or when it is low (because the climate control system can no longer maintain the set temperature). – When consumption of electricity by electrical components is high. . When the engine is automatically restarted by the Auto Start Stop system, the power provided via the accessory power outlet will be reduced. Depending on the connected appliance, the power of the appliance may temporarily turn off. ! Auto Start Stop warning light s07bh0109 Auto Start Stop warning light (yellow) The Auto Start Stop warning light will illuminate in yellow when initially turning the ignition switch to the “ON” position. The light will turn off after the engine has started. CAUTION If the Auto Start Stop warning light does not turn off after the engine has started, the Auto Start Stop system may be malfunctioning. Contact your authorized SUBARU dealer for an inspection. ! To turn on/off the Auto Start Stop system s07bh0111 Auto Start Stop OFF indicator light To turn the Auto Start Stop system on and off, operate the center information display. Refer to “Car settings” P203 (11.6-inch display models) or “Vehicle setting icons” P221 (dual 7.0-inch display models). When the Auto Start Stop system is turned OFF, the Auto Start Stop OFF indicator light on the combination meter display (color LCD) will illuminate. While the engine is temporarily stopped by the system, if the Auto Start Stop system turns off, the engine will be restarted even if you do not release the brake pedal. 356 Auto Start Stop System NOTE . If the engine is restarted when the Auto Start Stop system is not operational and the ignition switch has been turned to the “OFF” position, the Auto Start Stop system will turn on again. . Be sure to turn the ignition switch to the “OFF” position when leaving the vehicle. Failure to do so could result in the battery discharging. ! Auto Start Stop No Activity Detected indicator light s07bh0110 Auto Start Stop No Activity Detected indicator light If the operational conditions are not met when the vehicle is stopped, the engine will not stop and the Auto Start Stop No Activity Detected indicator light will illuminate. It will turn off when the vehicle begins to drive. & Displaying the Auto Start Stop System Status s07bh02 Approximate indications of the time that the engine has been stopped by the Auto Start Stop system and/or the amount of fuel saved can be displayed on the combination meter display (color LCD). For details, refer to “Basic Screens” P185. & System Warning s07bh03 So that it can be used safely and comfortably, the Auto Start Stop system is designed to constantly monitor the vehicle conditions as well as the environment inside and outside the vehicle in addition to driver operations, and to provide various warnings to the driver via the warning light and/or indicator light illuminating and a buzzer sounding. For details about the warning light and indicator light, refer to “Auto Start Stop Warning Light (Yellow)” P177. ! Warning buzzer s07bh0301 The buzzer will sound when the engine hood is opened while the engine is stopped by the Auto Start Stop system. When this occurs, the buzzer will stop sounding when the following operations are performed. . The engine is restarted by normal operation. (Refer to “Preparing to Drive” P312.) . The ignition switch is turned to the “OFF” position. ! Display of warning messages s07bh0302 If a warning message is displayed on the combination meter display (color LCD) while driving, a malfunction may have occurred in the Auto Start Stop system. In this case, the Auto Start Stop warning light will illuminate. Have your vehicle inspected at a SUBARU dealer as soon as possible. Auto Start Stop System 357 7 Starting and Operating 7-19. Rear View Camera s07br A rear view camera is attached to the rear gate. When the ignition switch is in the “ON” position and the select lever is set to “R”, the rear view camera automatically displays the rear view image behind the vehicle on the center information display. WARNING . Since the rear view camera uses a wide-angle lens, the image on the monitor is different from the actual view in terms of distance. . Since the range of the image on the monitor is limited, always check the rear view and the surrounding area with your eyes and mirrors, and move backward at a slow speed. Moving backward only by checking the rear view image from the camera could cause an accident. . Do not disassemble or modify the camera, switch or wiring. If smoke comes out or you smell a strange odor, stop using the rear view camera immediately. Contact your SUBARU dealer for an inspection. Continued use may result in accident, fire or electric shock. CAUTION . When washing your vehicle with a high-pressure washer, do not allow water to touch the camera directly. Entry of water in the camera lens may result in condensation, malfunction, fire or electric shock. . Since the camera is a precision device, do not subject it to strong impacts. Otherwise, malfunction, fire or electric shock may occur. . If mud or snow sticks to or is frozen on the camera, you must be very careful when removing it. Otherwise, damage to the camera may cause a fire or electric shock. Pour water or lukewarm water over the camera to remove mud and ice, and wipe it with a soft, dry cloth. . Do not put a flame close to the camera or wiring. Otherwise, damage or fire may occur. . When replacing the fuse, be sure to use a fuse with the specified rating. Use of a fuse with a different rating may result in a malfunction. . If you use the rear view camera for a long time while the engine is not operated, the battery may become completely discharged. NOTE . Do not wipe the camera with alcohol, benzine or paint thinner. Otherwise, discoloration may occur. To remove contamination, wipe the camera with a cloth moistened with a diluted neutral detergent. Then wipe it with a soft, dry cloth. . When waxing the vehicle, be careful not to apply the wax to the camera. If it comes in contact with the camera, moisten a clean cloth with a diluted 358 Rear View Camera neutral detergent to remove the wax. . The camera lens has a hard coating to help prevent scratches. However, when washing the vehicle or cleaning the camera lens, be careful not to scratch the camera lens. Do not use a washing brush directly on the camera lens. The image quality of the rear view camera may deteriorate. . Strong light shined on the camera lens may develop vertical lines around the light source. This is not a malfunction. . Under the fluorescent light, the display may flicker. However, this is not a malfunction. . The image of the rear view camera may be slightly different from the actual color of the objects. . If there is a malfunction on the center information display, refer to “Malfunctions of the Center Information Display” P443. & How to Use the Rear View Camera s07br01 When the select lever is set to “R”, the rear view camera automatically displays the rear view image from the vehicle. When the lever is set to other positions, the image before setting to “R” is displayed. 1. Set the ignition switch to “ON”. 2. Set the select lever to “R”. NOTE . The image of the rear view camera is horizontally reversed as is the case with the vehicle inside mirror or the outside mirror. . When “Rear Camera Delay Control” is on, the rear view image will be displayed on the center information display for a certain period of time after the select lever is shifted to a position other than the “P” position from “R”. To turn the function on and off, refer to “General settings” P198 (11.6-inch display models) or “General settings” P215 (dual 7.0-inch display models). . It may be difficult to see the image of the rear view camera in the following cases. This is not a malfunction of the camera. – The vehicle is in a dark place (at night, in a tunnel, etc.). – The vehicle is in an extremely hot or cold place. – An object (such as raindrops, snow, dirt, etc.) that disturbs the view of the rear view camera sticks to the lens of the camera. – Strong light is shining directly on the camera lens (occasionally, there are vertical lines on the screen). & Viewing Range on the Screen s07br02 CAUTION The range that can be viewed with the rear view camera is limited. Always be sure to check with your eyes when moving backward and proceed slowly. Otherwise, it may cause an accident or injury. Range of view – CONTINUED – Rear View Camera 359 7 Starting and Operating Range of view Image from camera The area from the rear end of the bumper can be viewed. Areas at both ends of the bumper and areas just under the bumper cannot be viewed. Also, the image from the rear view camera looks shorter than the actual distance. Range of view Image from camera The area above the camera cannot be viewed. If there is an object that has a wide projection on its upper part such as a sign pole behind the vehicle, the projection cannot be seen on the screen. & Help Lines s07br03 The help lines are a guide to help you realize the actual distance from the screen image. NOTE If you shift to the “R” range within several seconds after turning on the ignition switch, the warning message may not be displayed. Wait for several seconds after turning on the ignition switch before shifting to the “R” range. Then, the warning message will be displayed. 360 Rear View Camera Help lines 1 Vehicle width line (oblique vertical line) 2 Approx. 10 ft (3 m) from the bumper (green horizontal line) 3 Approx. 6 ft (2 m) from the bumper (green horizontal line) 4 Approx. 3 ft (1 m) from the bumper (yellow horizontal line) 5 Approx. 1.5 ft (0.5 m) from the bumper (red horizontal line) 6 Vehicle centerline 7 Dynamic guidelines When the select lever is set to “R”, the monitor screen displays the help lines together with the rear view image. CAUTION . When moving backward, always check the back with your eyes without relying on the help lines. Otherwise, it may cause an accident or injury. . The actual position may be different from the indication of the help lines. . Differences may occur due to the number of passengers or the loaded cargo. . When the vehicle is on a slope or inclined against the road, the indication is different from the actual position. NOTE When “Steering Angle Lines” is off, the dynamic guidelines will disappear on the center information display. To turn the dynamic guidelines on and off, refer to “General settings” P198 (11.6-inch display models) or “General settings” P215 (dual 7.0-inch display models). ! Difference between screen image and actual road s07br0301 The distance markers show the distance for a level road when the vehicle is not loaded. It may be different from the actual distance depending on the loading conditions or road conditions. ! When there is an upward slope at the back s07br030101 1 3 ft (1 m) The distance on the screen looks farther than the actual distance. – CONTINUED – Rear View Camera 361 7 Starting and Operating ! When there is a downward slope at the back s07br030102 1 3 ft (1 m) The distance on the screen looks nearer than the actual distance. NOTE When cargo is loaded, the rear view distance on the screen looks farther than the actual distance as in an upward slope. ! Feature of distance marker s07br0302 1 3 ft (1 m) line 2 10 ft (3 m) line The distance marker shows the distance on the road. If there is a car or another object close behind, distance cannot be correctly displayed. 7-20. BSD/RCTA (If Equipped) s07bm The BSD/RCTA consists of radar sensors with Blind Spot Detection and Rear Cross Traffic Alert. These functions of BSD/RCTA are the systems that detect objects and vehicles to the rear and draw attention to the driver when changing a lane or when driving in reverse. WARNING The driver is responsible for driving safely. Always be sure to check the surroundings with your eyes when changing lanes or reversing the vehicle. The system is designed to assist the driver in changing lanes or reversing safely by monitoring the rear and side areas of the vehicle. However, you cannot rely on this system alone in assuring the safety during a lane change or reversing. Overconfidence in this system could result in an accident and lead to serious injury or death. Since the system operation has various limitations, the flashing or illumination of the BSD/RCTA approach indicator light 362 BSD/RCTA may be delayed, or the warning buzzer may be delayed or inoperative, even if there is a vehicle traveling in a neighboring lane or approaching your vehicle from either side. The driver is responsible for paying attention to the rear and side areas of the vehicle. & System Features s07bm01 BSD/RCTA consists of the following functions. . To detect a vehicle in a blind spot on an adjacent lane or a vehicle approaching at high speed while driving the vehicle (Blind Spot Detection) . To detect a vehicle approaching from the right or left while reversing the vehicle (Rear Cross Traffic Alert) The system uses radar sensors for the following features. NOTE The BSD/RCTA radar sensor has been certified by radio wave-related laws applicable in the U.S. and other FCC compliant countries, including Canada. When driving your vehicle in countries other than the U.S. and Canada, you must obtain certification for the country where you are driving the vehicle. For more information on certification in the U.S. and other FCC compliant countries, including Canada, refer to “Certification for the BSD/RCTA” P369. ! Blind Spot Detection (BSD) s07bm0101 1 Operating range The system notifies the driver of the presence of vehicles in its blind spot. . If the system detects a vehicle in its blind spot, it warns the driver by illuminating the BSD/RCTA approach indicator light(s) on the outside mirror (s). . If the driver operates the turn signal lever in the direction where the BSD/ RCTA approach indicator light is illuminating, the system warns the driver of dangers by flashing the BSD/RCTA approach indicator light. ! Lane Change Assist (LCA) s07bm010101 1 Operating range The system notifies the driver of vehicles approaching at a high speed in the neighboring lanes. . If the system detects a vehicle approaching at a high speed in the neighboring lanes, it warns the driver of dangers by illuminating the BSD/ RCTA approach indicator light(s) on the outside mirror(s). . If the driver operates the turn signal lever in the direction where the BSD/ RCTA approach indicator light is illumi- – CONTINUED – BSD/RCTA 363 7 Starting and Operating nating, the system warns the driver of dangers by flashing the BSD/RCTA approach indicator light. ! Rear Cross Traffic Alert (RCTA) s07bm0103 1 Operating range The system notifies the driver of another vehicle approaching from either side when driving in reverse. This feature helps the driver check the rear and side areas of the vehicle when moving backward. If the system detects a vehicle approaching from either side while moving backward, it warns the driver of dangers in the following way. . The BSD/RCTA approach indicator light(s) on the outside mirror(s) flashes. . A warning buzzer sounds. . An icon appears on the center information display. ! Limitations of the detectability of RCTA s07bm010301 Since the detectability of RCTA is limited, the RCTA may not operate properly in angled parking. Example 1 1 The detection range of the radar sensors 2 Area out of detection range of the radar sensors A Vehicle that may not be detected B Parked vehicle WARNING An approaching vehicle (A) may not be detected because the detection range is limited by the parked vehicle (B). Always be sure to check the surroundings with your eyes when reversing the vehicle. Example 2 1 The detection range of the radar sensors C Vehicle that may be detected NOTE The system may detect that a vehicle (C) is passing in front of your vehicle. Always be sure to check the surroundings with your eyes when reversing the vehicle. 364 BSD/RCTA & System Operation s07bm02 ! Operating conditions s07bm0201 The BSD/RCTA will operate when all of the following conditions are met. . The ignition switch is in the “ON” position. . The BSD/RCTA warning indicator and BSD/RCTA OFF indicator are turned off. . The vehicle is driven at speeds above 7 mph (12 km/h) (except when reversing). . The select lever is in the “R” position (RCTA only). The BSD/RCTA will not operate in the following situations. . The BSD/RCTA OFF indicator appears. . The vehicle speed is below 6 mph (10 km/h) even when the BSD/RCTA OFF indicator does not appear (except when reversing). NOTE . In the following cases, the BSD/ RCTA will stop operating and the BSD/RCTA warning indicator will appear. – When a malfunction occurs in the system, including the BSD/RCTA approach indicator light . If the BSD/RCTA warning indicator appears, exercise proper caution. For details, refer to “BSD/RCTA Warning Indicator” P368. . In the following cases, the BSD/ RCTA will temporarily stop operating (or may stop operating) and the BSD/RCTA OFF indicator will appear. – When the radar sensor becomes significantly misaligned (If the orientation of the radar sensor is shifted for any reason, readjustment is required. Have the sensor adjusted at a SUBARU dealer.) – When a large amount of snow or ice sticks to the rear bumper surface around the radar sensors – When the vehicle is driven on a snow-covered road or in an environment in which there are no objects around (such as in a desert) for a prolonged period of time – When the temperature around the radar sensors increases excessively due to long driving on uphill grades in the summer, etc. – When the temperature around the radar sensors becomes extremely low – When the vehicle battery voltage lowers – When the vehicle voltage exceeds the battery voltage rating The BSD/RCTA will resume operation once these conditions are corrected, and the BSD/RCTA OFF indicator will disappear. However, if the BSD/RCTA OFF indicator appears for a prolonged period of time, have the system inspected at a SUBARU dealer as soon as possible. . The detectability of the radar sensors is restricted. The BSD/RCTA detection may be impaired and the system may not operate properly under the following conditions. – When the rear bumper around the radar sensors is distorted – When ice, snow or mud adheres to the rear bumper surface around the radar sensors – When stickers, etc. are affixed on the areas of the radar sensors on the rear bumper – During adverse weather conditions such as rain, snow or fog – When driving on wet roads such as snow-covered roads and through puddles . The radar sensors may not detect or may have difficulty detecting the – CONTINUED – BSD/RCTA 365 7 Starting and Operating following vehicles and objects. – Small motorcycles, bicycles, pedestrians, stationary objects on the road or road side, etc. – Vehicles with body shapes that the radar may not reflect (vehicles with lower body height such as a trailer with no cargo and sports cars) – Vehicles that are not approaching your vehicle even though they are in the detection area (either on a neighboring lane to the rear or beside your vehicle when reversing) (The system determines the presence of approaching vehicles based on data detected by the radar sensors.) – Vehicles traveling at significantly different speeds – Vehicles driving in parallel at almost the same speed as your vehicle for a prolonged time – Oncoming vehicles – Vehicles in a lane beyond the neighboring lane – Vehicles traveling at a significantly lower speed that you are trying to overtake . On a road with extremely narrow lanes, the system may detect vehicles driving in a lane next to the neighboring lane. & BSD/RCTA Approach Indicator Light/Warning Buzzer s07bm03 While the BSD/RCTA is active, the following item(s) will operate to alert the driver: . The BSD/RCTA approach indicator light (when there are vehicles in the neighboring lanes). . The BSD/RCTA approach indicator light and warning buzzer (when a vehicle is approaching from the left or right side while your vehicle is reversing) ! BSD/RCTA approach indicator light s07bm0301 BSD/RCTA approach indicator light It is mounted on each side of the outside mirrors. The indicator light will illuminate when a vehicle approaching from behind is detected. The indicator light will flash to warn the driver of dangers under the following conditions. . While the indicator light is illuminating, if the turn signal lever is operated toward the side in which this light turned on . When reversing the vehicle while the system detects a vehicle approaching from either side ! BSD/RCTA approach indicator light dimming function s07bm030101 When the headlights are turned on, the brightness of the BSD/RCTA approach indicator light will be reduced. NOTE . You may have difficulty seeing the BSD/RCTA approach indicator light under the following conditions. – When sunlight shines directly on it – When the headlight beams from a vehicle traveling behind shines directly on it . While the illumination brightness control dial is in the fully upward position, even if the headlights are 366 BSD/RCTA turned on, the brightness of the BSD/RCTA approach indicator light will not be reduced. For details about the illumination brightness control dial, refer to “Illumination Brightness Control” P155. ! BSD/RCTA approach warning buzzer (only when reversing) s07bm0302 A warning buzzer sounds along with flashing of the BSD/RCTA approach indicator light to warn the driver of dangers. The setting of the warning buzzer volume can be changed by operating the center information display. For details, refer to “Car settings” P203 (11.6-inch display models) or “Vehicle setting icons” P221 (dual 7.0-inch display models). ! Safety tips regarding the BSD/RCTA approach indicator light/warning buzzer s07bm0303 . In the following cases, operation of the BSD/RCTA approach indicator light and the warning buzzer may be delayed or the system may fail to issue these warnings. – When a vehicle moves to the neighboring lane from a lane next to the neighboring lane – When driving on a steep incline or on repeated sharp uphill and downhill grades – When going beyond a pass – When both your vehicle and a vehicle driving on a neighboring lane are driving on the far side of each lane. – When several narrowly-spaced vehicles are approaching in a row – In low radius bends (tight bends or when making turns at an intersection) – When there is a difference in height between your lane and the neighboring lane – Immediately after the BSD/RCTA is activated by touching “Rear Vehicle Detection (BSD/RCTA)” – Immediately after the select lever is shifted to the “R” position – When extremely heavy cargo is loaded in the cargo area . During reversing, operation of the BSD/ RCTA approach indicator light and the warning buzzer may be delayed or the system may fail to issue these warnings under the following conditions. – When backing out of an angled parking space – When a large-sized vehicle is parked next to your vehicle (That vehicle prevents the propagation of radar waves.) – When reversing on sloped roads – When reversing at a high speed . The BSD/RCTA approach indicator light may illuminate when driving close to solid objects on the road or road side (such as guardrails, tunnels and sidewalls). . When turning at an intersection in urban areas, or a multilane intersection, the BSD/RCTA approach indicator light may flash. . If a building or a wall exists in the reversing direction, the BSD/RCTA approach indicator light may flash and the warning buzzer may sound. . In the following cases, the system may detect a vehicle driving two lanes away from your vehicle. – When your vehicle drives on the – CONTINUED – BSD/RCTA 367 7 Starting and Operating near side of its lane from the corresponding vehicle – When the vehicle driving two lanes away drives on the near side of its lane from your vehicle & BSD/RCTA OFF Indicator s07bm08 ! System temporary stops s07bm0801 1 BSD/RCTA temporary stop message 2 BSD/RCTA OFF indicator This display appears when the system is used at extremely high or low temperatures or when abnormal voltage exists. Once these conditions are corrected, the system will recover from the temporary stop condition and the indicator will disappear. If the indicator remains displayed for a prolonged time, have the system inspected at a SUBARU dealer. ! System temporary stops due to reduced radar sensitivity s07bm0802 1 BSD/RCTA temporary stop message due to reduced radar sensitivity 2 BSD/RCTA OFF indicator This display appears when the detectability of the radar sensors is reduced. Once the condition is corrected, the system will recover from the temporary stop condition and the indicator will disappear. If the indicator remains displayed for a prolonged time, have the system inspected at a SUBARU dealer. & BSD/RCTA Warning Indicator s07bm04 ! System malfunction s07bm0403 1 BSD/RCTA malfunction message 2 At first, this message will appear 3 Then this message will appear 4 BSD/RCTA warning indicator This display appears when a malfunction occurs in the system. Contact a SUBARU dealer and have the system inspected. 368 BSD/RCTA & To Turn On/Off the BSD/RCTA s07bm09 BSD/RCTA OFF indicator To turn the BSD/RCTA system on and off, operate the center information display. Refer to “Car settings” P203 (11.6-inch display models) or “Vehicle setting icons” P221 (dual 7.0-inch display models). When the BSD/RCTA system is turned OFF, the BSD/RCTA OFF indicator on the combination meter display (color LCD) will illuminate. NOTE . In the following cases, turn off the BSD/RCTA system. The system may not operate properly due to blocked radar waves. – When towing a trailer – When a bicycle carrier or other item is fitted to the rear of the vehicle – When using a chassis dynamometer or free roller device, etc. – When running the engine and making the wheels rotate while lifting up the vehicle . If the ignition switch is turned to the “LOCK”/“OFF” position, the last known status of the system is maintained. For example, if the ignition switch is turned to the “LOCK”/ “OFF” position with the BSD/RCTA deactivated, the BSD/RCTA remains deactivated the next time the ignition switch is turned to the “ON” position. & Certification for the BSD/ RCTA s07bm06 . The U.S. and other FCC compliant countries FCC ID: OAYSRR3A CAUTION FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. – CONTINUED – BSD/RCTA 369 7 Starting and Operating . Canada-spec. models & Handling of Radar Sensors s07bm07 Radar sensors The radar sensors, one on each side of the vehicle, are mounted inside the rear bumper. 370 BSD/RCTA CAUTION To ensure correct operation of the BSD/RCTA, observe the following precautions. . Always keep the bumper surface near the radar sensors clean. . Do not affix any stickers or other items on the bumper surface near the radar sensors. For details, consult your SUBARU dealer. . Do not modify the bumper near the radar sensors. . Do not paint the bumper near the radar sensors. . Do not expose the bumper near the radar sensors to strong impacts. If a sensor becomes misaligned, a system malfunction may occur, including the inability to detect vehicles entering the detection areas. If any strong shock is applied to the bumper, be sure to contact your SUBARU dealer for inspection. . Do not disassemble the radar sensors. NOTE If the radar sensors require repair or replacement, or the bumper area around the radar sensors requires repair, paintwork or replacement, contact your SUBARU dealer for assistance. 7-21. Reverse Automatic Braking (RAB) System (If Equipped) s07bn Reverse Automatic Braking (RAB) is a system designed to help avoid collisions or reduce collision damage when reversing the vehicle. If a wall or an obstacle is detected in the reversing direction, the system will notify the driver with a warning sound and may activate the vehicle’s brakes automatically. WARNING . Reverse Automatic Braking (RAB) is not a system intended to replace the driver’s responsibility to check their surroundings for vehicles or obstacles to avoid a collision. . The driver is responsible for driving safely. Before reversing, be sure to first depress the brake pedal and visually check the surroundings. . There are some cases in which the vehicle cannot avoid collision, because the system operation has limitations. The warning sound or automatic braking may – CONTINUED – Reverse Automatic Braking (RAB) System 371 7 Starting and Operating be delayed or may not operate at all even when an obstacle is present. . Make sure to set the Automatic Braking function to OFF when the vehicle is on the free roller or on the chassis dynamometer. Otherwise, the vehicle may move and it may cause an accident. . The system is not designed to detect people (including children), animals or other moving objects. . Depending on the vehicle condition or the surrounding environment, the sonar sensor’s ability to detect objects may become unstable. NOTE The Reverse Automatic Braking (RAB) system records and stores the following data when automatic braking operates. It does not record conversations, personal information or other audio data. . Distance from the object . Vehicle speed . Accelerator pedal operation status . Brake pedal operation status . Select lever position . Outside temperature . The sensitivity setting of the sonar sensors SUBARU and third parties contracted by SUBARU may acquire and use the recorded data for the purpose of vehicle research and development. SUBARU and third parties contracted by SUBARU will not disclose or provide the acquired data to any other third party except under the following conditions. . The vehicle owner has given his/her consent. . The disclosure/provision is based on a court order or other legally enforceable request. . Data that has been modified so that the user and vehicle cannot be identified is provided to a research institution for statistical processing or similar purposes. & Reverse Automatic Braking (RAB) System Overview s07bn01 The Reverse Automatic Braking (RAB) system will operate the following 2 functions using 4 sonar sensors. . Sonar Audible Alarm function The Reverse Automatic Braking (RAB) system detects objects rearward and warns the driver by warning message on the center information display and warning beeps. . Automatic Braking function The Automatic Braking function detects objects rearward and if there is a high risk of a collision, the system decelerates the vehicle and controls the braking to reduce damage. 372 Reverse Automatic Braking (RAB) System 1 When reversing 2 When either strong automatic braking or torque control is applied to prevent collision (in this case, short warning beeps or continuous warning beeps will sound) 3 When the vehicle is stopped by the system (in this case, the continuous beep will remain sounding) 4 Object (e.g., a wall) ! Detecting range s07bn0101 1 Detecting range (width): Approximately 6 in (15 cm) outside of the vehicle width 2 Range that the system cannot detect: Approximately 20 in (50 cm) behind the rear of the vehicle 3 Detecting range (length): Approximately 5 ft (1.5 m) from the rear of the vehicle WARNING If your vehicle is trapped on a railroad crossing and you are trying to escape by reversing through the crossing gate, the system may recognize the crossing gate as an obstacle and brake may activate. In this case, remain calm and either continue to depress the accelerator pedal or cancel the system. To – CONTINUED – Reverse Automatic Braking (RAB) System 373 7 Starting and Operating cancel the system, refer to “Canceling the Reverse Automatic Braking (RAB) System Operation” P380. & Operating Conditions s07bn02 The Reverse Automatic Braking (RAB) system will operate when all of the following conditions are met. 1 EyeSight warning indicator 2 RAB warning indicator 3 RAB OFF indicator . The ignition switch is in the “ON” position. . The EyeSight warning indicator is off. . The RAB warning indicator is off. . The RAB OFF indicator is off. . The select lever is in the “R” position. Sonar Audible Alarm function . Sonar Audible Alarm is set to “ON”. . The vehicle speed is from 0 to 9 mph (0 to 15 km/h). Automatic Braking function . Automatic Braking is set to “ON”. . The vehicle speed is from 1 to 9 mph (1.5 to 15 km/h). NOTE . In the following cases, the Reverse Automatic Braking (RAB) system will not operate. Promptly contact a SUBARU dealer to have the system inspected. – The EyeSight warning indicator is illuminated. – The RAB warning indicator is illuminated. . In the following cases, the Reverse Automatic Braking (RAB) system cannot be operated. – The (EyeSight Temporary Stop indicator: White) is illuminated, and the messages corresponding to the EyeSight temporary stop are displayed on the combination meter display (color LCD). For details, refer to the Owner’s Manual supplement for the EyeSight system. – The RAB OFF indicator is illuminated. . In the following cases, the functions may not be able to properly work. Promptly contact a SUBARU dealer to have the system inspected. – A sticker, paint, or a chemical is applied to the sonar sensors or the rear bumper near the sonar sensor. – The rear bumper is modified. – The rear bumper has been removed and attached. – The ground clearance is changed due to the vehicle’s loading condition or modification. – There is damage to the sonar sensors or the rear bumper near the sonar sensor. – The rear bumper is exposed to strong impact, or the rear bumper is deformed. . On a steep hill, the system’s automatic braking ability will be reduced. . The system is designed to avoid collisions by automatic hard braking when the vehicle’s reversing speed is less than approximately 3 mph (5 km/h). However, the system does not guarantee that the vehicle will be able to avoid collisions in any situation. 374 Reverse Automatic Braking (RAB) System . If the vehicle is reversed at an extremely slow speed, the driver’s operation may be prioritized. In this case, automatic braking will not operate. . The system may not be able to detect and apply the brake with the following objects. – Sharp or thin objects such as poles, fences and ropes which may not reflect the sound wave emitted from the sonar sensor. – Objects that are too close to the rear bumper when the select lever is set to the “R” position. – Objects with a surface which may not reflect the sound wave emitted from the sonar sensor such as a chain link fence. . Objects the system is not designed to detect and apply brake. – Pedestrians. – Moving objects including moving vehicles. – Objects which absorbs sound waves such as cloth or snow. – Objects whose surface has a diagonal angle. – Objects that are low to the ground such as parking blocks. – Objects that are high above the ground such as objects hanging from above. – Objects that are out of range of the center of the vehicle in the horizontal direction. – Objects that are not perpendicular to the ground. – The surface of the object is uneven or wavy. . When reversing the vehicle, the functions may not be able to work properly or may cause a system malfunction if the following conditions exist. High frequency sound from other sources are nearby: – Horn sound from another vehicle. – Engine sound from other vehicles. – Sound of an air brake. – Vehicle detection equipment or a sonar from another vehicle. – A sound wave with a frequency similar to the vehicle’s system is transmitted near by. – A vehicle equipped with the same system is reversing toward your reversing direction. Weather conditions: – Extremely high or extremely low temperatures in which the area near the sonar sensor becomes too hot or too cold to operate. – The sonar sensors or the rear bumper near the sonar sensors are exposed to heavy rain or a significant amount of water. – Fog, snow or sandstorm, etc. – Air is moving rapidly such as when a strong wind is blowing. Parts attached to the rear bumper near the sonar sensor: – Commercial electronic parts (fog light, fender pole, radio antenna) or commercial attachment parts (trailer hitch, bicycle carrier, bumper guard) are attached. – Parts that emit high frequency sound, such as a horn or speaker, are attached. Vehicle conditions: – Ice, snow or mud is adhered to the sonar sensors or the rear bumper near the sonar sensor. – The vehicle is significantly inclined. – The ground clearance is significantly reduced due to the vehicle’s loading condition, etc. – When the sonar sensor is misaligned due to a collision or an – CONTINUED – Reverse Automatic Braking (RAB) System 375 7 Starting and Operating accident. Surrounding environment: – A cloth banner, flag, hanging branch or railroad crossing bars are present in the reversing direction. – When reversing on a gravel or grassy area. – When reversing in an area where objects or walls are adjacent to the vehicle such as narrow tunnels, narrow bridges, narrow roads or narrow garages. – Wheel track or hole is present in the ground of the reversing direction. – When reversing over a drainage cover (grating cover). – The path of the reversing direction is inclined such as on a steep uphill. – When reversing downhill. – A curb or step is present in the reversing direction. – Reversing in a garage with a low ceiling or a tunnel. – There is a patch of snow rearward. – There is a puddle of water. – There is an obstacle that is next to an object. – Going back along a wall. – The area where the road starts touching dirt and snow – When reversing on an uneven road. . In circumstances such as the following, it may not be possible to avoid a collision even when the system operates normally. 376 Reverse Automatic Braking (RAB) System – Roads are slippery. – The tire air pressure is not correct. – The tires have become worn. – Tire chains are installed. – Tires which are not the designated size are installed. – Emergency repairs were performed using a puncture repair kit. – The suspension was modified. – Vehicle driving is unstable due to accident or malfunction. – The brake warning light is illuminated. & Sonar Audible Alarm Function s07bn03 When the Reverse Automatic Braking (RAB) system is in operation, audible warning beeps will sound to warn the driver of a potential collision in 3 levels: medium proximity, short proximity, closest proximity. NOTE It may take time to display the wall and sound warning beeps after the object was recognized by the Sonar Audible Alarm function. Guideline of detecting range Alert level Range of detected object* Distance indicator Alarm pattern Long proximity (object detected) 43 in (110 cm) or more Green No warning sound Medium proximity alert (approaching the object) 28 to 43 in (70 to 110 cm) Yellow Short beeps Short proximity alert (approaching closer to the object) 20 to 28 in (50 to 70 cm) Orange Rapid short beeps Closest proximity alert (too close to the object) 20 in (50 cm) or less Red Continuous beep *: Range of detection may vary depending on the environmental condition. – CONTINUED – Reverse Automatic Braking (RAB) System 377 7 Starting and Operating ! Obstacle detected and alert level s07bn0301 Long proximity alert (object detected) 1 Green: 43 in (110 cm) or more Medium proximity alert (approaching the object) 1 Yellow: 28 to 43 in (70 to 110 cm) Short proximity alert (approaching the object closer) 1 Orange: 20 to 28 in (50 to 70 cm) Closest proximity alert (too close to the object) 1 Red: 20 in (50 cm) or less When an object is detected in the reversing direction, the range of detected object will be shown on the center information display. A warning alarm will sound and, depending on the speed, either torque control to generate engine braking or automatic braking will be applied. & Automatic Braking Function Operation s07bn08 ! Object close behind warning s07bn0801 Automatic braking warning 1 Warning message If the system determine the risk of collision with the object. Short warning beeps or continuous warning beeps will sound and either strong automatic braking or torque 378 Reverse Automatic Braking (RAB) System control will be applied to prevent collision. At this time, a warning message is also displayed on the combination meter display (color LCD). Depress brake pedal warning 1 Warning message Make sure to depress the brake pedal once the vehicle has been stopped by automatic braking. Until the brake pedal is depressed, a message will be displayed on the center information display and the continuous beep will remain sounding. At this time, a warning message is also displayed on the combination meter display (color LCD). NOTE The Sonar Audible Alarm function and Automatic Braking function are different in operation conditions. Therefore, there are cases in which only one of these functions will activate. WARNING Depress the brake pedal immediately after the system stops the vehicle by automatic braking. Depending on the conditions of the road surface and tires, the vehicle may not remain stopped, possibly leading to an accident. ! After the vehicle is stopped by the system s07bn0802 After the brake pedal is depressed, the RAB OFF indicator will illuminate and the system will temporarily stop operating. The RAB OFF indicator will turn off when the select lever is shifted to a position other than the “R” position. The system will operate again the next time the select lever is shifted to the “R” position. NOTE . In the following cases, after the vehicle has been stopped by the Reverse Automatic Braking (RAB) system, brake control is released and the electronic parking brake operates. For details about releasing the parking brake, refer to “Electronic Parking Brake” P345. – When 2 minutes pass after the vehicle is stopped – When any door is opened . The Reverse Automatic Braking (RAB) system may stop operating temporarily in the following cases and the RAB OFF indicator will illuminate. – Ice, snow or mud is adhered to the sonar sensors or the rear bumper near the sonar sensor. – Objects are too close to the rear bumper when the select lever is – CONTINUED – Reverse Automatic Braking (RAB) System 379 7 Starting and Operating set to the “R” position. – The system detects sounds of a similar frequency to the RAB sonar. – The Vehicle Dynamics Control OFF mode and TRACK mode are selected. & Canceling the Reverse Automatic Braking (RAB) System Operation s07bn04 The Reverse Automatic Braking (RAB) system can be temporarily canceled by any of the following operations. . While the vehicle is stopped by the operation of automatic braking, the brake pedal is depressed. . While the vehicle is stopped by the operation of automatic braking, the accelerator pedal is depressed. . The accelerator pedal is depressed continuously (In this case, limited acceleration will be canceled and the vehicle will continue reversing.) . The select lever is shifted to a position other than the “R” position. NOTE The system will be canceled if the object is no longer detected. & Reverse Automatic Braking (RAB) System ON/OFF Setting s07bn05 While the select lever is shifted to the “R” position, the below functions of the Reverse Automatic Braking (RAB) system can be set by operating the center information display. 1 ON setting key of Automatic Braking function 2 OFF setting key of Automatic Braking function 3 ON setting key of the Sonar Audible Alarm function 4 OFF setting key of the Sonar Audible Alarm function When the ON setting key is shown, the corresponding setting is ON. Touch the ON setting key to turn the setting OFF. When the OFF setting is shown, the corresponding setting is OFF. Touch the OFF setting key to turn the setting ON. When the Automatic Braking function is turned OFF, the following indicator(s) will illuminate. The RAB OFF indicator will turn off when the corresponding function is turned ON. NOTE When the settings cannot be changed, the ON/OFF setting key will be grayed out. Also, the following settings can be changed by operating the center information display. 380 Reverse Automatic Braking (RAB) System . Warning volume . Sonar Audible Alarm For details, refer to “Car settings” P203. & RAB Warning Indicator s07bn07 1 RAB malfunction message 2 RAB warning indicator If the Reverse Automatic Braking (RAB) system malfunctions, the above indicator illuminates on the combination meter. Contact the nearest SUBARU dealer for details. & Handling of the Sonar Sensors s07bn06 The 4 sonar sensors are located in the rear bumper. To ensure the proper operation of the Reverse Automatic Braking (RAB) system, observe the following precautions. . Do not affix any stickers or other items on the sonar sensor or the bumper surface near the sonar sensors. . Always keep the sonar sensor and the rear bumper surface near the sonar sensors clean. . Do not modify rear bumper. . Do not paint the bumper near the sonar sensors. . Do not apply high pressure water to the sonar sensors with a high pressure carwashing machine. . Do not apply strong impacts to the rear bumper near the sonar sensors. If a sensor becomes misaligned, a system malfunction may occur, including inability to detect objects in the reversing direction. If any strong impact is applied to the rear bumper, contact a SUBARU dealer to have the system inspected. . Do not disassemble the sonar sensors. NOTE If the sonar sensors require repair or replacement, or if the area of the rear bumper near the sonar sensors requires repair, paintwork or replacement, contact your SUBARU dealer for assistance. Reverse Automatic Braking (RAB) System 381 7 Starting and Operating 7-22. Driver Monitoring System (If Equipped) s07bp Driver Monitoring System is introduced as DriverFocus in some countries. The Driver Monitoring System monitors possible cases when the driver is not paying attention to the forward direction, and also recognizes individual users. This system warns the driver of inattentive/ drowsy driving, and can support safe and comfortable driving by automatically retrieving the following settings. – Climate control setting – Meter setting – Center information display setting When a user is registered, various settings are automatically retrieved when the user enters the vehicle. 1 Camera CAUTION . Always use the utmost care in driving – Overconfidence because you are driving a vehicle with the Driver Monitoring System could easily lead to a serious accident. . This system cannot detect if the driver is feeling drowsy or is concentrating on safe driving. . It cannot judge if the driver is awake or asleep, if their driving abilities have diminished, or if they are concentrating on safe driving. . In some circumstances, the system may not be able to correctly detect the driver state. NOTE . The user recognition camera does not save images, audio, or video. . The Driver Monitoring System may not operate correctly when sunlight is shining into the vehicle in the following ways. – Sunlight is shining directly (or through glass) onto the user recognition camera. – There are shadows on the driver’s face caused by sunlight (or any light with a strong infrared component). – There are large momentary fluctuations in the strength of the sunlight (or any light with a strong infrared component) shining on the face. . Correct detection may not be possible when a device that includes an infrared light source (such as a commercially available Driver Monitoring System) is installed in the vehicle interior. . The Driver Monitoring System may 382 Driver Monitoring System not operate correctly at the following times when the driver is wearing glasses or sunglasses. – The sunglasses do not allow the easy passage of infrared light. – The surrounding scenery is reflected strongly in the lenses of the glasses or sunglasses. – The eyes are hidden by the frame of the glasses and the user recognition camera cannot detect the eyes. – The light from an infrared light source (LED) is reflected in the lenses of the glasses or sunglasses. – The driver is wearing an eyepatch. – The driver is wearing a hat set deeply over the eyes. . Depending on the type of mask, correct detection of inattentive/ drowsy driving may not be possible. . Correct user recognition is not possible if the eyes, nose, or mouth is covered with a mask, muffler, sunglasses, or other item. . The Driver Monitoring System may not operate correctly when the eyebrows, eyes, nose, or mouth is hidden due to item that is between the face and the system. . If a thick cover is attached to the steering wheel, then depending on the position set for the tilt/telescopic steering wheel, the cover may block the system’s view of the face, and the system and the Driver Monitoring System may not operate correctly. . Do not attach any stickers to the user recognition camera or the infrared light source (LED). If the user recognition camera or infrared light source (LED) is covered by an obstruction, it will not be possible to correctly monitor the driver. . If an accessory is hung from the inside mirror, correct detection may not be possible. . Do not touch the user recognition camera or the infrared light source (LED) directly with your fingers. If there is dirt or a fingerprint on these parts, it will not be possible to correctly monitor the driver. If there is dirt or a fingerprint on these parts, either wipe them with a soft dry cloth, or wipe gently with a damp cloth after first firmly wringing the water out. . If the surface of the user recognition camera or the infrared light source (LED) becomes scratched, correct detection may not be possible. Be careful that hard objects do not contact these parts. . If there is condensation on the user recognition camera or the infrared light source (LED), correct detection may not be possible. If there is condensation on these parts, wipe it away with a soft dry cloth. . When registering a user for user recognition, avoid closing your eyes as much as possible. . If the user recognition success rate is low, it is possible that the user is not correctly registered. Delete the registered data and perform registration again. . If a user frequently drives both with glasses and contact lenses, it is recommended that registration be performed both when wearing glasses and when wearing contact lenses. . User recognition starts immediately after entering the vehicle, however if the user looks downward or at the driver side mirror for a long time, the user may not be recognized. . When one person among twins or another pair of persons with similar facial features is registered, the other person may be incorrectly recognized as the registered user when entering the vehicle. – CONTINUED – Driver Monitoring System 383 7 Starting and Operating . If the person in the passenger’s seat leans into the driver’s seat, or in other cases when there are two or more faces near the driver’s seat, the system may not operate correctly. . There are cases when the system concludes that the user’s eyes are closed when the user is looking downward during driving, such as when checking instruments or the navigation screen. In such cases, the drowsy driving warning buzzer may sound or the system may otherwise not operate correctly. . If the eyes are narrowed when laughing or when there is a dazzling outside light, the system may judge that the eyes are closed and the drowsy driving warning buzzer may sound or the system may otherwise not operate correctly. . The drowsy driving or asleep warning states are recognized from the length of time and percentage of time that the eyes are closed. The drowsy driving warning buzzer will not sound simply when the driver feels sleepy or yawns. . Even when the driver does not feel sleepy, if his or her eyes are closed or if he or she blinks frequently, the drowsy driving warning buzzer may sound. . The inattentive driving warning buzzer may sound if the driver leans forward or puts his or her head out of the window while driving. . The inattentive driving warning buzzer will not sound when the vehicle is stopped or traveling at slow speed even if the driver is not looking ahead. . The Driver Monitoring System collects and stores data regarding drivers’ facial features. Facial recognition data is stored locally and does not leave the vehicle. It is not transmitted to or stored by SUBARU or anyone else. The Driver Monitoring System may be disabled and any stored driver data may be deleted by following the instructions below. If the Driver Monitoring System is disabled, it will be unable to provide any of its safety or convenience functions. 384 Driver Monitoring System The functions which are available vary depending on the Driver Monitoring System setting and the user recognition function setting. Available functions Driver Monitoring System*1 ON OFF User recognition function*2 ON Inattentive/drowsy driving warning Available Not available User recognition function Available Not available OFF Inattentive/drowsy driving warning Available Not available User recognition function Not available Not available – CONTINUED – Driver Monitoring System 385 7 Starting and Operating Available function items Driver Monitoring System*1 ON OFF User recognition function*2 ON Register User Available Not available Delete User Available Not available Delete All Users Available Not available OFF Register User Not available Not available Delete User Available Not available Delete All Users Available Not available *1: The system can be turned ON/OFF with the center information display. Refer to “Car settings” P203. *2: The function can be turned ON/OFF in the center information display customization settings. Refer to “Car settings” P203. The functions which are available vary depending on whether or not the user is registered. Available functions The user is registered. The user is not registered. User recognition function Available Not available & User Recognition Function s07bp01 When a user is registered, it is possible to retrieve the following settings. ! Meter personalization s07bp0102 . Combination meter display (color LCD) basic screen Displays the screen which the user had selected at the time when he/she last exited the vehicle. ! Center information display personalization s07bp0103 . Center information display basic screen Displays the screen which the user had selected at the time when he/she last exited the vehicle. . Fuel consumption screen Displays the average fuel economy for past driving by that user. ! Climate control personalization s07bp0104 . Climate control settings Retrieves the preferred setting temperature, airflow mode selection, and other settings which the user had selected at the time when he/she last exited the vehicle. NOTE When a recognized user exits the vehicle while the Max A/C mode is on 386 Driver Monitoring System and the push engine switch is turned off, the system stores the setting configured before Max A/C mode was turned on. ! Changing the personalization settings s07bp0106 Item Meter personalization* Combination meter display (color LCD) basic screen When the customization screen linked with the synchronized user function is selected and the setting is changed, it is Driver Monitoring System ON/OFF status automatically stored. *: When the Driver Monitoring System is OFF, the Driver Monitoring System continues to store the conditions from immediately before the Driver Monitoring System was turned OFF even if the screen was selected and the setting was changed. – CONTINUED – Driver Monitoring System 387 7 Starting and Operating & Inattentive/Drowsy Driving Warning s07bp02 While driving, the Driver Monitoring System monitors possible cases of driver inattention or drowsiness and warns the driver. When the inattentive/drowsy driving warning activates, the buzzer sounds and an interrupt display appears. NOTE . The inattentive/drowsy driving warning operates regardless of the status of the user recognition function. . The inattentive driving warning does not activate when the turn signal is operating or when the select lever is in the “R” position. . When the pre-collision brake system OFF indicator is illuminated on the combination meter display (color LCD), the inattentive driving warning activates at the same timing as usual even when a vehicle ahead or obstacle is detected. For details about the EyeSight system, refer to the Owner’s Manual supplement for the EyeSight system. ! Inattentive driving warning s07bp0201 When the system monitors that the driver may be inattentive, it warns the driver. When the inattentive driving warning activates, the buzzer sounds and an interrupt display appears on the combination meter display (color LCD). When the EyeSight system has detected a vehicle ahead or obstacle in the forward direction, the inattentive driving warning may activate at earlier timing than usual. Refer to the Owner’s Manual supplement for the EyeSight system. 388 Driver Monitoring System ! Drowsy driving warning s07bp0202 Possible drowsiness is detected from the amount of driver eyelid closure, and a warning is given to the driver. When the drowsy driving warning activates, the buzzer sounds and an interrupt display appears. Combination meter display (color LCD) Center information display Warning chime Drowsy driving Beep, beep. (Continues until the driver’s eyes open.) Very drowsy Beep, beep, beep, beep, beep (5 times) Slightly drowsy — Beep Not drowsy — — — & Driver Monitoring System Indicator/ Warning s07bp03 1 Driver Monitoring System operation indicator light (green) 2 Driver Monitoring System OFF indicator light 3 Driver Monitoring System temporary stop indicator light 4 Driver Monitoring System warning light (yellow) The Driver Monitoring System indicator/ warning indicates the status of the Driver Monitoring System on the combination meter display (color LCD). NOTE When the Driver Monitoring System OFF indicator, Driver Monitoring System temporary stop indicator, or Driver Monitoring System warning is illumi- – CONTINUED – Driver Monitoring System 389 7 Starting and Operating nated, the Driver Monitoring System function cannot be used. In addition, the following items cannot be selected. . Register User . Delete User . Delete All Users ! Driver Monitoring System operation indicator light (green) s07bp0301 This indicator illuminates when the Driver Monitoring System is operating. ! Driver Monitoring System OFF indicator light s07bp0302 This indicator illuminates when the user has turned off the Driver Monitoring System and the Driver Monitoring System is not operating. ! Driver Monitoring System temporary stop indicator light s07bp0303 This indicator illuminates when the Driver Monitoring System is temporarily stopped. NOTE The Driver Monitoring System stops temporarily in the following circumstances. . When the temperature of the main unit of the Driver Monitoring System is high or low. . When the Driver Monitoring System cannot monitor the driver’s eye movement. . When the Driver Monitoring System cannot monitor the driver’s eyebrows, eyes, nose or mouth. . When the camera and the infrared light source (LED) are covered and the Driver Monitoring System cannot monitor the driver correctly. ! Driver Monitoring System warning light (yellow) s07bp0304 This warning illuminates when there is a problem with the Driver Monitoring System. Contact a SUBARU dealer to have the system inspected. & Using the Driver Monitoring System s07bp04 ! User recognition s07bp0401 When a user is registered with the user recognition function, the Driver Monitoring System performs the following. 1. When the door is opened and the push-button ignition switch is OFF, the user recognition screen appears and the Driver Monitoring system starts user recognition. The user recognition screen may not appear when the door is opened in some cases, such as when only a short time has passed after the push-button ignition switch was turned OFF. In such cases, user recognition starts when the door is closed however the user recognition screen does not appear. 390 Driver Monitoring System 2. Sit in the driver’s seat and face forward for a few moments. 3. When user recognition is completed, the Hello screen appears on the center information display. At this time, climate control settings, combination meter display (color LCD) basic screen, center information display basic screen, and customization settings all change based on the user information. NOTE . When a center information display operation switch is pressed, the user recognition screen is canceled, however user recognition continues. . If user recognition fails, perform recognition again following the instructions, refer to “When a user is not recognized” P391. . User recognition is not performed while driving. ! When a user is not recognized s07bp0402 In the following case, user recognition may not be possible and “User recognition stopped.” may be displayed. . There is an object blocking the camera. Remove the obstacle and follow the reference procedure to perform user recognition again. Refer to “Driver Monitoring System” P209. 1 Camera NOTE . User recognition may not be possible when there is dirt or fingerprints on the user recognition camera. To clean, either wipe using a soft cloth or else wipe gently using a moistened cloth that has been thoroughly wrung out. . When the synchronized user function is turned OFF, manual repeat facial scan is not possible. & Registering and Deleting a User s07bp05 Users can be registered in the Driver Monitoring System, and registered users can be deleted. For the user registration and delete procedures, refer to “Driver Monitoring System” P209. NOTE . When the Driver Monitoring System OFF indicator, Driver Monitoring System temporary stop indicator, or Driver Monitoring System warning is illuminated, the following items cannot be selected. – Register User – Delete User – Delete All Users . User information can also be deleted by resetting the center information – CONTINUED – Driver Monitoring System 391 7 Starting and Operating display to the factory default settings. When the settings are reset to the factory default settings, all user information is deleted. The settings cannot be reset to the factory default settings when the Driver Monitoring System is OFF. & Driver Monitoring System ON/OFF Settings s07bp07 NOTE . When the Driver Monitoring System is turned OFF after user recognition was completed, the user recognition function stores the Driver Monitoring System ON/OFF state. . Even when the Driver Monitoring System is set to OFF, the Driver Monitoring System automatically turns ON once the driver’s door is opened and closed while the vehicle is stopped. This only occurs when the user recognition setting is ON. The system then reverts automatically to the OFF state. . After the Driver Monitoring System was turned OFF, if the Driver Monitoring System is turned ON while the driver’s door is open, user recognition may not occur correctly. ! To turn on/off the Driver Monitoring System s07bp0701 To turn the Driver Monitoring System on and off, operate the center information display. Refer to “Car settings” P203. When the Driver Monitoring System is turned OFF, the Driver Monitoring System OFF indicator on the combination meter display (color LCD) will illuminate. NOTE Even when the Driver Monitoring System is turned off, the user recognition does not switch on or off automatically. ! User recognition settings s07bp0702 The Driver Monitoring System User recognition function can be turned ON/OFF. For the setting procedure, refer to “Car settings” P203. NOTE . The user recognition function setting cannot be changed for each individual user. . The default setting for the user recognition function is ON. . When the user recognition function is turned OFF, the following items cannot be selected. – Repeat Facial Scan – Register User & How to Get the Source Code That Uses Open Source Software s07bp09 Free Open-Source Software Information This product uses Free Open-Source Software (FOSS). The license information and/or the source code of such FOSS can be found at the following URL: http://www.embedded-carmultimedia.jp/ RTOS/License/oss/DMS_0101/ 392 Driver Monitoring System———————————————— — — — — — — — — — — — — — — — — s08 8-1. New Vehicle Break-In Driving – the First 1,000 miles (1,600 km) 396 8-2. Fuel Economy Hints . 396 8-3. Engine Exhaust Gas (Carbon Monoxide) 396 8-4. Catalytic Converter. 397 8-5. Periodic Inspections. 398 8-6. Driving in Foreign Countries . 398 8-7. Frequent Driving Prevents Vehicle Battery from Discharging 398 8-8. Driving Tips for AWD Vehicles 399 8-9. On-Road and Off-Road Driving 400 Before Driving 401 During Driving 401 After Driving. 402 8-10. Winter Driving . 402 Operation during Cold Weather. 402 Driving on Snowy and Icy Roads 403 Corrosion Protection 404 Snow Tires . 405 Tire Chains 405 Rocking the Vehicle . 406 8-11. Loading Your Vehicle 406 Vehicle Capacity Weight . 407 GVWR and GAWR (Gross Vehicle Weight Rating and Gross Axle Weight Rating) 407 Roof Rail (If Equipped) . 408 Roof Molding and Crossbar (If Equipped) . 409 Roof Tent . 410 8-12. Trailer Hitch (Dealer Option).412 Connecting a SUBARU Genuine Trailer Hitch 413 If Not Towing a Trailer 414 8-13. Trailer Towing 414 Warranties and Maintenance. 415 Maximum Load Limits 415 Trailer Hitches (Dealer Option) 418 When You Do Not Tow a Trailer 419 Connecting a Trailer . 419 Trailer Towing Tips. 420 Driving Tips 8 Driving Tips 8-1. New Vehicle Break-In Driving – the First 1,000 miles (1,600 km) s08aa The performance and long life of your vehicle are dependent on how you handle and care for your vehicle while it is new. Follow these instructions during the first 1,000 miles (1,600 km): . Do not race the engine. And do not allow engine speed to exceed 4,000 rpm except in an emergency. . Do not drive at one constant engine or vehicle speed for a long time, either fast or slow. . Avoid starting suddenly and rapid acceleration, except in an emergency. . Avoid hard braking, except in an emergency. The same break-in procedures should be applied to a newly installed or overhauled engine or when brake pads are replaced with new ones. 8-2. Fuel Economy Hints s08ab The following suggestions will help to save your fuel. . Select the proper gear position for the speed and road conditions. . Avoid sudden acceleration or deceleration. Always accelerate gently until you reach the desired speed. Then try to maintain that speed for as long as possible. . Do not pump the accelerator and avoid racing the engine. . Avoid unnecessary engine idling. . Keep the engine properly tuned. . Keep the tires inflated to the correct pressure shown on the tire inflation pressure label, which is located under the door latch on the driver’s side. Low pressure will increase tire wear and fuel consumption. . Use the air conditioner only when necessary. . Keep the front and rear wheels in proper alignment. . Avoid carrying unnecessary luggage or cargo. . The indication of the ECO gauge shows a reference for saving fuel. For details, refer to “ECO gauge” P182. 8-3. Engine Exhaust Gas (Carbon Monoxide) s08ac WARNING . Never inhale engine exhaust gas. Engine exhaust gas contains carbon monoxide, a colorless and odorless gas which is dangerous, or even lethal, if inhaled. . Always properly maintain the engine exhaust system to prevent engine exhaust gas from entering the vehicle. . Never run the engine in a closed space, such as a garage, except for the brief time needed to drive the vehicle in or out of it. . Avoid remaining in a parked vehicle for a long time while the engine is running. If that is unavoidable, then use the ventilation fan to force fresh air into the vehicle. . Always keep the front ventilator inlet grille free from snow, leaves or other obstructions to ensure that the ventilation system always works properly. 396 New Vehicle Break-In Driving – the First 1,000 miles (1,600 km) . If at any time you suspect that exhaust fumes are entering the vehicle, have the problem checked and corrected as soon as possible. If you must drive under these conditions, drive only with all windows fully open. . Keep the rear gate closed while driving to prevent exhaust gas from entering the vehicle. NOTE Due to the expansion and contraction of the metals used in the manufacture of the exhaust system, you may hear a crackling sound coming from the exhaust system for a short time after the engine has been shut off. This sound is normal. 8-4. Catalytic Converter s08ad WARNING . Avoid fire hazards. Do not drive or park the vehicle anywhere near flammable materials (e.g. grass, paper, rags or leaves), because the catalytic converter operates at very high temperatures. . Keep everyone and flammable materials away from the exhaust pipe while the engine is running. The exhaust gas is very hot. The catalytic converter is installed in the exhaust system. It serves as catalyst to reduce HC, CO and NOx in exhaust gases, thus providing cleaner exhaust. To avoid damage to the catalytic converter: . Use only unleaded gasoline. Even a small amount of leaded gasoline will damage the catalytic converter. . Never start the engine by pushing or pulling the vehicle. . Avoid racing the engine. . Never turn off the ignition switch while the vehicle is moving. . Keep your engine tuned-up. If you feel the engine running rough (misfiring, backfiring or incomplete combustion), have your vehicle checked and repaired by an authorized SUBARU dealer. . Do not apply undercoating or rust prevention treatment to the heat shield of catalytic converter and the exhaust system. . Do not drive with an extremely low fuel level. Catalytic Converter 397 8 Driving Tips 8-5. Periodic Inspections s08ae To keep your vehicle in the best condition at all times, always have the recommended maintenance services listed in the maintenance schedule in the “Warranty and Maintenance Booklet” performed at the specified time or mileage intervals. 8-6. Driving in Foreign Countries s08af When planning to use your vehicle in another country: . Confirm the availability of the correct fuel. Refer to “Fuel Requirements” P307. . Comply with all regulations and requirements of each country. 8-7. Frequent Driving Prevents Vehicle Battery from Discharging s08au Vehicle batteries are a consumable item. If the battery charge is not maintained regularly, the battery will deteriorate and may require replacement sooner than expected. The battery is charged by running the engine. It is recommended to drive the car for a longer time occasionally to prevent the vehicle battery from becoming drained, especially if it is regularly driven only a short time daily (e.g. only 10 minutes) or if it is parked for 10 days or more. It may be possible to recover the state of charge and maintain the battery performance by driving for a longer time (e. g. more than 30 minutes). If you cannot drive enough, we recommend to charge the battery as needed. If no action is taken, the battery will become discharged. This is a normal characteristic of any battery. 398 Periodic Inspections 8-8. Driving Tips for AWD Vehicles s08ag WARNING . Always maintain a safe driving speed according to the road and weather conditions in order to avoid having an accident on a sharp turn, during sudden braking or under other similar conditions. . Always use the utmost care in driving – overconfidence because you are driving an All- Wheel Drive vehicle could easily lead to a serious accident. . When replacing or installing tire(s), all four tires must be the same for the following items. (a) Size (b) Speed symbol (c) Load index (d) Circumference (e) Construction (f) Manufacturer (g) Brand (tread pattern) (h) Degrees of wear For items (a) to (c), you must obey the specification that is printed on the tire inflation pressure label. The tire inflation pressure label is located on the driver’s door pillar. If all four tires are not the same in items (a) to (h), serious mechanical damage could be caused to the drivetrain of the car, and affect the followings. – Ride – Handling – Braking – Speedometer/Odometer calibration – Clearance between the body and the tires It also may be dangerous and lead to loss of vehicle control, and it can lead to an accident. CAUTION If you use a temporary spare tire to replace a flat tire, be sure to use the original temporary spare tire stored in the vehicle. Using other sizes may result in severe mechanical damage to the drive train of your vehicle. All-Wheel Drive distributes the engine power to all four wheels. AWD vehicles provide better traction when driving on slippery, wet or snow-covered roads and when moving out of mud, dirt and sand. By shifting power between the front and rear wheels, SUBARU AWD can also provide added traction during acceleration, and added engine braking force during deceleration. Therefore, your SUBARU AWD vehicle may handle differently than an ordinary two wheel drive vehicle and it contains some features unique to AWD. For safety purposes as well as to avoid damaging the AWD system, you should keep the following tips in mind: . An AWD vehicle is better able to climb steeper roads under snowy or slippery – CONTINUED – Driving Tips for AWD Vehicles 399 8 Driving Tips conditions than a two wheel drive vehicle. There is little difference in handling, however, during extremely sharp turns or sudden braking. Therefore, when driving down a slope or turning corners, be sure to reduce your speed and maintain an ample distance from other vehicles. . Always check the cold tire pressure before starting to drive. The recommended tire pressure is provided on the tire inflation pressure label, which is located on the door pillar on the driver’s side. . Frequent driving of an AWD vehicle under hard-driving conditions such as steep hills or dusty roads will necessitate more frequent replacement of the following items than that specified in the “Warranty and Maintenance Booklet”. – Engine oil – Brake fluid – Rear differential gear oil – Continuously variable transmission fluid – Front differential gear oil . There are some precautions that you must observe when towing your vehicle. For detailed information, refer to “Towing” P436. 8-9. On-Road and Off-Road Driving s08ah WARNING . Always maintain a safe driving speed according to the road and weather conditions in order to avoid having an accident on a sharp turn, during sudden braking or under other similar conditions. . Always use the utmost care in driving – overconfidence because you are driving an All- Wheel Drive vehicle could easily lead to a serious accident. . Never attempt to drive through pools and puddles, or roads flooded with water. Water entering the engine air intake or the exhaust pipe or water splashing onto electrical parts may damage your vehicle and may cause it to stall. In this case, contact your SUBARU dealer immediately. Regardless of its depth, it can wash away the ground from under your tires, resulting in possible loss of traction and even vehicle rollover. CAUTION . Frequent driving of an AWD model under hard-driving conditions such as rough roads or off roads will necessitate more frequent replacement of the following items than that specified in the maintenance schedule described in the “Warranty and Maintenance Booklet”. – Engine oil – Brake fluid Remember that damage done to your SUBARU while operating it off-road and not using common 400 On-Road and Off-Road Driving sense precautions such as those listed here is not eligible for warranty coverage. . After driving on gravel roads or rough roads, check the undercarriage of the vehicle body for any damage, deformation, or paint removal. If you notice any irregularities, contact a SUBARU dealer for an inspection as soon as possible. Because of the AWD feature and higher ground clearance, you can drive your SUBARU on ordinary roads or off-road. But please keep in mind that an AWD SUBARU is a passenger car and is neither a conventional off-road vehicle nor an allterrain vehicle. If you do take your SUBARU off-road, certain common sense precautions such as those in the following list should be taken. & Before Driving s08ah09 . Make certain that you and all of your passengers are wearing seatbelts. . Carry some emergency equipment, such as a towing rope or chain, a shovel, wheel blocks, first aid kit and cell phone or citizens band radio. . Secure all cargo carried inside the vehicle and make certain that it is not piled higher than the seatbacks. During sudden stops or jolts, unsecured cargo could be thrown around in the vehicle and cause injury. Do not pile heavy loads on the roof. Those loads raise the vehicle’s center of gravity and make it more prone to tip over. . Never equip your vehicle with tires larger than those specified in this manual. & During Driving s08ah10 General precautions: . Drive carefully. Do not take unnecessary risks by driving in dangerous areas or over rough terrain. . Slow down and employ extra caution at all times. When driving off-road, you will not have the benefit of marked traffic lanes, banked curves, traffic signs and the like. . Do not drive across steep slopes. Instead, drive either straight up or straight down the slopes. A vehicle can much more easily tip over sideways than it can end over end. Avoid driving straight up or down slopes that are too steep. . Avoid sharp turning maneuvers, especially at higher speeds. . Do not grip the inside or spokes of the steering wheel. A bad bump could jerk the wheel and injure your hands. Instead, drive with your fingers and thumbs on the outside of the rim. . Do not drive or park over or near flammable materials such as dry grass or fallen leaves, as they may burn easily. The exhaust system is very hot while the engine is running and right after the engine stops. This could create a fire hazard. Precautions when driving under especially dangerous situations: . If you must rock the vehicle to free it from sand or mud, depress the accelerator pedal slightly and move the select lever back and forth between “1”/“D” and “R” repeatedly. Do not race the engine. For the best possible traction, avoid spinning the wheels when trying to free the vehicle. . When the road surface is extremely slippery, you can obtain better traction by starting the vehicle with the transmission in 2nd than 1st. Refer to “Selection of Manual Mode” P330. – CONTINUED – On-Road and Off-Road Driving 401 8 Driving Tips & After Driving s08ah11 . Always check your brakes for effectiveness immediately after driving in sand, mud or water. Do this by driving slowly and stepping on the brake pedal. Repeat that process several times to dry out the brake discs and brake pads. . After driving through tall grass, mud, rocks, sand, rivers, etc., check that there is no grass, bush, paper, rags, stones, sand, etc. adhering to or trapped on the underbody. Clear off any such matter from the underbody. If the vehicle is used with these materials trapped or adhering to the underbody, a mechanical breakdown or fire could occur. . Wash the vehicle’s underbody after offroad driving. Suspension components are particularly prone to dirt buildup, so they need to be washed thoroughly. 8-10. Winter Driving s08ai & Operation during Cold Weather s08ai01 Carry some emergency equipment, such as a window scraper, a bag of sand, flares, a small shovel and jumper cables. Check the battery and cables. Cold temperatures reduce battery capacity. The battery must be in good condition to provide enough power for cold winter starts. It normally takes longer to start the engine in very cold weather conditions. Use an engine oil of a proper grade and viscosity for cold weather. Using heavy summer oil will make it harder to start the engine. Keep the door locks from freezing by squirting them with deicer or glycerin. Forcing a frozen door open may damage or separate the rubber weather strips around the door. If the door is frozen, use hot water to melt the ice, and afterwards thoroughly wipe the water away. Use a windshield washer fluid that contains an antifreeze solution. Do not use engine antifreeze or other substitutes because they may damage the paint of the vehicle. If you fill the windshield washer tank with a fluid with a different concentration from the one used previously, purge the old fluid from the piping between the windshield washer tank and washer nozzles by operating the washer for a certain period of time. Otherwise, if the concentration of the fluid remaining in the piping is too low for the outside temperature, it may freeze and block the nozzles. CAUTION . Adjust the washer fluid concentration appropriately for the outside temperature. If the concentration is inappropriate, sprayed washer fluid may freeze on the windshield and obstruct your view, and the fluid may freeze in the windshield washer tank. . Be careful foreign matter does not contaminate the washer fluid when filling the tank. Contamination could cause malfunctions, such as clogging the pump. . State or local regulations on volatile organic compounds may restrict the use of methanol, a common windshield washer antifreeze additive. Washer fluids containing non-methanol anti- 402 Winter Driving freeze agents should be used only if they provide cold weather protection without damaging your vehicle’s paint, wiper blades or washer system. ! Before driving your vehicle s08ai0101 Before entering the vehicle, remove any snow or ice from your shoes because that could make the pedals slippery and driving dangerous. While warming up the vehicle before driving, check that the accelerator pedal, brake pedal, and all other controls operate smoothly. Clear away ice and snow that has accumulated under the fenders to avoid making steering difficult. During severe winter driving, stop when and where it is safe to do so and check under the fenders periodically. ! Parking in cold weather s08ai0102 WARNING Snow can trap dangerous exhaust gases under your vehicle. Keep snow clear of the exhaust pipe and from around your vehicle if you park the vehicle in snow with the engine running. CAUTION . Do not use the parking brake when parking for long periods in cold weather since it could freeze in that position. . When the vehicle is parked in snow or when it snows, raise the wiper blades off the glass to prevent damage to them. . Under either of the following conditions, icing may develop on the brake system, which could cause poor braking action. – When the vehicle has been left parked after use on roads heavily covered with snow – When the vehicle has been left parked during a snowstorm Check for snow or ice buildup on the suspension, disc brakes and brake hoses underneath the vehicle. If there is caked snow or ice, remove it, being careful not to damage the disc brakes and brake hoses and ABS harness. When parking for long periods in cold weather, you should observe the following tips. 1. Place the select lever in the “P” position. 2. Use tire stops under the tires to prevent the vehicle from moving. ! Refueling in cold weather s08ai0103 To help prevent moisture from forming in the fuel system and the risk of its freezing, use of an antifreeze additive in the fuel tank is recommended during cold weather. Use only additives that are specifically designed for this purpose. When an antifreeze additive is used, its effect lasts longer if the tank is refilled whenever the fuel level reaches half empty. If your SUBARU is not going to be used for an extended period, it is best to have the fuel tank filled to capacity. & Driving on Snowy and Icy Roads s08ai02 WARNING Do not use the cruise control on slippery roads such as snowy or icy roads. This may cause loss of vehicle control. – CONTINUED – Winter Driving 403 8 Driving Tips CAUTION Avoid prolonged continuous driving in snowstorms. Snow will enter the engine’s intake system and may hinder the airflow, which could result in engine shutdown or even breakdown. To prevent skidding and slipping, avoid sudden braking, abrupt acceleration, highspeed driving, and sharp turning when driving on snowy or icy roads. Always maintain ample distance between your vehicle and the vehicle ahead of you to avoid the need for sudden braking. To supplement the foot brake, use the engine brake effectively to control the vehicle speed. (Shift into a lower gear when necessary.) Avoid shifting down abruptly. Such behavior can cause the wheels to lock, possibly leading to loss of vehicle control. An anti-lock brake system (ABS) enhances your vehicle’s braking performance on snowy and icy roads. For information about braking on slippery surfaces, refer to “ABS (Anti-Lock Brake System)” P336 and “Vehicle Dynamics Control System” P337. ! Wiper operation when snowing s08ai0201 Before driving in cold weather, make sure the wiper blade rubbers are not frozen to the windshield or rear window. If the wiper blade rubbers are frozen to the windshield or rear window, perform the following procedure. . To thaw the windshield wiper blade rubbers, use the defroster with the airflow selection in “ ” and the temperature set for maximum warmth until the wiper blade rubbers are completely thawed. Refer to “Climate Control” P261. . If your vehicle is equipped with a wiper deicer, use it. It is helpful to thaw the windshield wiper blade rubbers. Refer to “Defogger and Deicer” P246. . To thaw the rear wiper blade rubbers, use the rear window defogger. Refer to “Defogger and Deicer” P246. When driving in snow, if frozen snow starts to stick on the surface of the windshield despite wiper operation, use the defroster with the airflow selection in “ ” and the temperature set for maximum warmth. After the windshield gets warmed enough to melt the frozen snow on it, wash it away using the windshield washer. Refer to “Windshield washer” P244. Snow stuck on the wiper arm prevents the wiper from working effectively. If snow is stuck on the wiper arm, pull off the road to a safe place, then remove it. If you stop the vehicle at road side, use the hazard warning flasher to alert other drivers. Refer to “Hazard Warning Flasher” P152. We recommend use of non-freezing type wiper blades (winter blades) during the seasons you could have snow and freezing temperatures. Blades of this type give superior wiping performance in snowy conditions. Be sure to use blades that are suitable for your vehicle. CAUTION During high-speed driving, nonfreezing type wiper blades may not perform as well as standard wiper blades. If this happens, reduce the vehicle speed. NOTE When the season requiring non-freezing type wiper blades is over, replace them with standard wiper blades. & Corrosion Protection s08ai03 Refer to “Corrosion Protection” P450. 404 Winter Driving & Snow Tires s08ai04 WARNING . When replacing or installing winter tire(s), all four tires must be the same for the following items. (a) Size (b) Speed symbol (c) Load index (d) Circumference (e) Construction (f) Manufacturer (g) Brand (tread pattern) (h) Degrees of wear For items (a) to (c), you must obey the specification that is printed on the tire inflation pressure label. The tire inflation pressure label is located on the driver’s door pillar. If all four tires are not the same in items (a) to (h), serious mechanical damage could be caused to the drivetrain of the car, and affect the followings. – Ride – Handling – Braking – Speedometer/Odometer calibration – Clearance between the body and the tires It also may be dangerous and lead to loss of vehicle control, and it can lead to an accident. . Do not use a combination of radial, belted bias or bias tires since it may cause dangerous handling characteristics and lead to an accident. Your vehicle is equipped with “all season tires” which are designed to provide an adequate measure of traction, handling and braking performance in year-round driving. In winter, it may be possible to enhance performance through use of tires designed specifically for winter driving conditions. If you choose to install winter tires on your vehicle, be sure to use the correct tire size and type. You must install four winter tires that are of the same size, construction, brand and load range and you should never mix radial, belted bias or bias tires since this may result in dangerous handling characteristics. When you choose a tire, make sure that there is enough clearance between the tire and vehicle body. Remember to drive with care at all times regardless of the type of tires on your vehicle. & Tire Chains s08ai05 CAUTION Tire chains cannot be used on your vehicle because of the lack of clearance between the tires and vehicle body. NOTE When tire chains cannot be used, use of another type of traction device (such as spring chains) may be acceptable if use on your vehicle is recommended by the device manufacturer, taking into account tire size and road conditions. Follow the device manufacturer’s instructions, especially regarding maximum vehicle speed. To help avoid damage to your vehicle, drive slowly, readjust or remove the device if it is contacting your vehicle, and do not spin your wheels. Damage caused to your vehicle by use of a traction device is not covered under warranty. – CONTINUED – Winter Driving 405 8 Driving Tips Make certain that any traction device you use is an SAE class S device, and use it on the front wheels only. Always use the utmost care when driving with a traction device. Overconfidence because you are using a traction device could easily lead to a serious accident. & Rocking the Vehicle s08ai06 If you must rock the vehicle to free it from snow, sand, or mud, depress the accelerator pedal slightly and move the select lever back and forth between “D” and “R” repeatedly. Do not race the engine. For the best possible traction, avoid spinning the wheels when trying to free the vehicle. When the road surface is extremely slippery, you can obtain better traction by starting the vehicle with the transmission in 2nd than 1st. For information on holding the transmission in 2nd position, refer to “Selection of Manual Mode” P330. 8-11. Loading Your Vehicle s08aj WARNING Never allow passengers to ride on a folded rear seatback, in the cargo area. Doing so may result in serious injury. WARNING . Never stack luggage or other cargo higher than the top of the seatback because it could tumble forward and injure passengers in the event of a sudden stop or accident. Keep luggage or cargo low, as close to the floor as possible. . When you carry something inside the vehicle, secure it whenever you can to prevent it from being thrown around inside the vehicle during sudden stops, sharp turns or in an accident. . Do not pile heavy loads on the roof. These loads raise the vehicle’s center of gravity and make it more prone to tip over. . Secure long items properly to prevent them from shooting forward and causing serious injury during a sudden stop. . Never exceed the maximum load limit. If you do, some parts on your vehicle can break, or it can change the way your vehicle handles. This could result in loss of control and cause personal injury. Also, overloading can shorten the life of your vehicle. . Do not place anything on the extended cargo area cover. Such items could tumble forward in the event of a sudden stop or a collision. This could cause serious injury. 406 Loading Your Vehicle CAUTION Do not carry spray cans, containers with flammable or corrosive liquids or any other dangerous items inside the vehicle. NOTE For better fuel economy, do not carry unneeded cargo. & Vehicle Capacity Weight s08aj01 Vehicle placard The load capacity of your vehicle is determined by weight, not by available cargo space. The maximum load you can carry in your vehicle is shown on the vehicle placard attached to the driver’s side door pillar. It includes the total weight of the driver and all passengers and their belongings, any optional equipment such as a trailer hitch, roof rack or bike carrier, etc., and the tongue load of a trailer. & GVWR and GAWR (Gross Vehicle Weight Rating and Gross Axle Weight Rating) s08aj02 Certification label The certification label attached to the driver’s side door pillar shows GVWR (Gross Vehicle Weight Rating) and GAWR (Gross Axle Weight Rating). The GVW (Gross Vehicle Weight) must never exceed the GVWR. GVW is the combined total of weight of the vehicle, fuel, driver, all passengers, luggage, any optional equipment and trailer tongue load. Therefore, the GVW changes depending on the situation. In addition, the total weight applied to each axle (GAW) must never exceed the GAWR. The front and rear GAWs can be – CONTINUED – Loading Your Vehicle 407 8 Driving Tips adjusted by relocating luggage inside the vehicle. Even if the total weight of your luggage is lower than the vehicle capacity weight, either front or rear GAW may exceed the GAWR, depending on the distribution of the luggage. When possible, the load should be evenly distributed throughout the vehicle. If you carry heavy loads in the vehicle, you should confirm that GVW and front and rear GAWs are within the GVWR and GAWR by putting your vehicle on a vehicle scale, found at a commercial weighing station. Do not use replacement tires with a lower load range than the originals because they may lower the GVWR and GAWR limitations. Replacement tires with a higher load range than the originals do not increase the GVWR and GAWR limitations. & Roof Rail (If Equipped) s08aj04 1 Roof rails Cargo can be carried on the roof after securing the crossbars to the roof rails and installing an appropriate carrying attachment. When installing crossbars and a carrying attachment, follow the manufacturer’s instructions. The roof rail system is designed to carry loads (cargo, crossbars and carrying attachment) of no more than 176 lbs (80 kg). Be sure not to exceed your vehicle’s GVWR and GAWR. CAUTION . When using a carrying attachment, make sure that the total carrying load of the cargo, crossbars and carrying attachment does not exceed 176 lbs (80 kg). Overloading may cause damage to the vehicle. . For cargo carrying purposes, the roof rails must be used together with the crossbars and any appropriate carrying attachment that may be needed. The roof rails must never be used alone to carry cargo. Otherwise, damage to the roof or paint, or a dangerous road hazard due to loss of cargo could result. NOTE Remember that the vehicle’s center of gravity is altered with the weight of the load on the roof, thus affecting driving characteristics. Drive carefully. Avoid rapid starts, hard cornering and abrupt stops. Crosswind effects will be increased. 408 Loading Your Vehicle & Roof Molding and Crossbar (If Equipped) s08aj06 CAUTION . For cargo carrying purposes, the roof molding must be used together with a roof crossbar kit and the appropriate carrying attachment. Otherwise, damage to the roof or paint or a dangerous road hazard due to loss of cargo could result. . When using the roof crossbar kit, make sure that the total weight of the crossbars, carrying attachment and cargo does not exceed the maximum load limit. Overloading may cause damage to the vehicle and create a safety hazard. Cargo can be carried after securing the roof crossbar kit to the roof molding and installing the appropriate carrying attachment. When installing the roof crossbar kit, follow the manufacturer’s instructions. When carrying cargo on the roof using the roof crossbar kit and carrying attachments, never exceed the maximum load limit as explained below. You should also be careful that the vehicle does not exceed the Gross Vehicle Weight Rating (GVWR) and front and rear Gross Axle Weight Rating (GAWR). For information about loading cargo into or onto your vehicle, refer to “Loading Your Vehicle” P406. The maximum total load on the roof (including crossbars, carrying attachments and cargo) must not exceed 176 lbs (80 kg). Refer to the crossbar installation instructions for the maximum crossbar capacity. Place the heaviest load at the bottom, close to the roof, and evenly distribute the cargo. Always properly secure all cargo. ! Installing carrying attachments on the crossbars s08aj0601 When installing any carrying attachments such as the load carriers, crossbars, bike carrier, ski carrier, kayak carrier, cargo basket, etc., follow the manufacturer’s instructions of the load capacity and make sure that the attachments are securely installed. Use only attachments designed specifically for the crossbars. Before operating the vehicle, make sure that the cargo is properly secured on the attachment. NOTE Remember that the vehicle’s center of gravity is altered with the weight of the load on the roof, thus affecting the driving characteristics. Drive carefully. Avoid rapid starts, hard cornering and abrupt stops. Crosswind effects will be increased. – CONTINUED – Loading Your Vehicle 409 8 Driving Tips ! Removal and installation of the crossbars s08aj0602 Each of the two roof moldings has two mounting points for crossbars. Each mounting point is fitted with a cover. Use a screwdriver to remove the covers. When installing the crossbars on the roof molding, follow the manufacturer’s instructions. & Roof Tent s08aj14 WARNING Adding weight to the vehicle’s roof can adversely affect handling, braking, and rollover resistance. The vehicle must never be driven with a total roof rail load in excess of 176 lbs (80 kg). CAUTION . The roof rail load limit for stationary vehicles (700 lbs (317 kg)) applies only when the vehicle is parked and the load is evenly distributed left/right and front/ rear and the roof crossbars and roof tent are tightly secured to the vehicle. If these conditions are not met, the load limit will be lower. . The maximum load limit of the roof crossbars must be obtained from the manufacturer or retailer of the roof rack. When driving the vehicle, the maximum roof rail load is 176 lbs (80 kg) or the crossbar load limit (whichever is lower). Roof tents may be used under certain conditions at your own risk. ! When driving the vehicle s08aj1401 The total weight on the roof rails, including the roof crossbars and roof tent, must not exceed the vehicle’s roof rail load of 176 lbs (80 kg), evenly distributed. 410 Loading Your Vehicle A: Roof rails B: Roof crossbars C: Roof tent B + C < 176 lbs (80 kg) ! When the vehicle is parked on level ground s08aj1402 A: Roof rails B: Roof crossbars C: Roof tent D: Occupants in the roof tent The total weight on the roof rails – including the roof crossbars, roof tent, and all occupants and contents in the roof tent – must not exceed either the vehicle’s roof rail load limit (700 lbs (317 kg)), evenly distributed, or the load limit of the roof crossbars, whichever is lower. Load limit of the roof rail (A). B + C + D < 700 lbs (317 kg) Exceeding this load limit could cause damage to the vehicle or racking system. The vehicle must never be driven with occupants in the roof tent. Before the vehicle is driven, occupants and cargo must be removed from the roof tent and the roof rail load must be restored to within the roof rail load limit of 176 lbs (80 kg). Refer to the user manual that accompanied the roof tent for important safety information and instructions on the proper installation and use of the tent. Loading Your Vehicle 411 8 Driving Tips 8-12. Trailer Hitch (Dealer Option) s08ak WARNING . Never exceed the maximum weight specified for the trailer hitch. Exceeding the maximum weight could cause an accident resulting in serious personal injuries. Permissible trailer weight changes depending on the situation. For possible recommendations and limitations, refer to “Trailer Towing” P414. . Trailer brakes are required when the tow load exceeds 1,000 lbs (453 kg). . Be sure your trailer has safety chains and that each chain will hold the trailer’s maximum gross weight. Towing trailers without safety chains could create a traffic safety hazard if the trailer separates from the hitch due to coupling damage or hitch ball damage. . Be sure to check the hitch pin and safety pin for positive locking placement before towing a trailer. If the ball mount separates from the receiver the trailer could become loose and create a traffic safety hazard. . Although towing regulations for trailer or caravan vehicles vary by state/region, all regulations agree that specifications such as the maximum gross trailer weight must not exceed the lesser of the following: – Maximum gross trailer weight – Maximum gross tongue weight – GVWR – GAWR . Failure to comply with the procedures set forth will not only compromise your safety, but will also negate your insurance coverage and/or may violate the state road and traffic acts and regulations. . It is recommended to only use the Genuine Subaru Ball Mount developed for use with this trailer hitch available at your Subaru dealership. Use the hitch only as a weight carrying hitch. Do not use with any type of weight distributing hitch. . The standard bumper beam must be installed after you remove the trailer hitch. Consult a SUBARU dealer for purchase of a standard bumper beam if you do not have the original. . Safety performance is decreased and there is increased risk of injury to passengers in the case of an accident if the SUBARU genuine trailer hitch or a standard bumper beam is not installed. One of them must always be installed on the vehicle. . If a trailer hitch is installed, it is not possible to install the rear towing hook. The maximum gross trailer weight and maximum gross tongue weight are indicated in the following table. When towing a trailer with brakes Maximum gross trailer weight Maximum gross tongue weight 1,500 lbs (680 kg) 150 lbs (68 kg) When towing a trailer without brakes Maximum gross trailer weight Maximum gross tongue weight 1,000 lbs (453 kg) 100 lbs (43 kg) 412 Trailer Hitch (Dealer Option) When towing a trailer, refer to “Trailer Towing” P414. & Connecting a SUBARU Genuine Trailer Hitch s08ak01 1 Ball mount 2 Hitch pin 3 Safety pin A Hitch receiver tube 1. Insert the ball mount into the hitch receiver tube. 2. Insert the hitch pin into the hole located on the hitch receiver tube so that the pin passes through the ball mount. 3. Insert the safety pin through the hole located on the hitch pin securely. 4. Check the ball mount assembly by pulling on it to make sure it does not come off the hitch receiver. 1 Hitch ball installation point 2 Hooks for safety chains 5. Attach a hitch ball. Use only a hitch ball that is appropriate for the ball mount and your trailer. The hitch ball must be securely installed on the ball mount. 6. Connect your trailer to the hitch ball. 7. Connect the trailer and the hitch with – CONTINUED – Trailer Hitch (Dealer Option) 413 8 Driving Tips safety chains that will hold the trailer’s maximum gross weight. WARNING Do not connect safety chains to any part of the vehicle other than the safety chain hooks. 1 Hitch harness connector 8. Connect the hitch wire harness’s black four-pin wire connector to the towing trailer’s wire harness. 9. Confirm proper function of the hitch electrical wire harness by individually activating the brake, stop and turn signal lights on the trailer. NOTE Always disconnect the trailer electrical wire harness before launching or retrieving a watercraft. & If Not Towing a Trailer s08ak02 . Remove the ball mount from the hitch receiver tube. . Place the dust cap over the four-pin connector of the hitch electrical wire harness to protect against possible damage. . Occasionally lubricate terminals of the four-pin connector using terminal grease. 8-13. Trailer Towing s08al Your vehicle is designed and intended to be used primarily as a passenger-carrying vehicle. Towing a trailer puts additional loads on your vehicle’s engine, drivetrain, brakes, tires and suspension and has an adverse effect on fuel economy. If you do decide to tow a trailer, your safety and satisfaction depend upon proper use of correct equipment and cautious operation of your vehicle. Seek the advice of your SUBARU dealer to assist you in purchasing a hitch and other necessary towing equipment appropriate for your vehicle. Do not use towing equipment other than genuine SUBARU towing equipment. In addition, be sure to follow the instructions for proper installation and use provided by the trailer or caravan’s manufacturer. SUBARU assumes no responsibility for injuries or vehicle damage that result from trailer towing equipment, or from any errors or omissions in the instructions accompanying such equipment or for your failure to follow the proper instructions. Regularly check that the hitch mounting bolts and nuts are tightened securely. 414 Trailer Towing & Warranties and Maintenance s08al01 SUBARU warranties do not apply to vehicle damage or malfunction caused by trailer towing. If you use your vehicle to tow a trailer, more frequent maintenance will be required due to the additional load. (Refer to “Maintenance schedule under severe driving conditions” in the “Warranty and Maintenance Booklet”.) Under no circumstances should a trailer be towed with a new vehicle or a vehicle with any new powertrain component (engine, transmission, differential, wheel bearings, etc.) for the first 1,000 miles (1,600 km) of driving. & Maximum Load Limits s08al02 WARNING Never exceed the maximum load limits explained in the following. Exceeding the maximum load limits could cause personal injury and/or vehicle damage. CAUTION . Adequate size trailer brakes are required when the trailer and its cargo exceed 1,000 lbs (453 kg) total weight. . Before towing a trailer, check the trailer total weight, GVW, GAWs and tongue load. Make sure the load and its distribution in your vehicle and trailer are acceptable. ! Total trailer weight s08al0201 Total trailer weight The total trailer weight (trailer weight plus its cargo load) must never exceed the maximum total trailer weight in the following table. – CONTINUED – Trailer Towing 415 8 Driving Tips Conditions Maximum total trailer weight When towing a trailer without brakes. 1,000 lbs (453 kg) When towing a trailer with brakes. 1,500 lbs (680 kg) When towing a trailer on a long uphill grade continuously for over 5 miles (8 km) with an outside temperature of 1048F (408C) or above. 750 lbs (340 kg) ! Gross Vehicle Weight (GVW) and Gross Vehicle Weight Rating (GVWR) s08al0202 Gross Vehicle Weight The Gross Vehicle Weight (GVW) must never exceed the Gross Vehicle Weight Rating (GVWR). Gross Vehicle Weight (GVW) is the combined total of the weight of the vehicle, driver, passengers, luggage, trailer hitch, trailer tongue load and any other optional equipment installed on your vehicle. Therefore, the GVW changes depending on the situation. Determine the GVW each time before going on a trip by putting your vehicle and trailer on a vehicle scale. 416 Trailer Towing Certification label GVWR of your vehicle that is given by SUBARU is shown on the certification label located at the bottom of driver’s side door pillar of your vehicle. ! Gross Axle Weight (GAW) and Gross Axle Weight Rating (GAWR) s08al0203 Gross Axle Weight The total weight applied to each axle (GAW) must never exceed the Gross Axle Weight Rating (GAWR). The front and rear GAWs can be adjusted by relocating passengers and luggage inside the vehicle. The front and rear GAWR of your vehicle that is given by SUBARU are also shown on the certification label located at the bottom of driver’s side door pillar. To check both GVWR and GAWR and to confirm that the total weight and weight distribution are within safe driving limits, you should have your vehicle and trailer weighed at a commercial weighing station. Be sure that all cargo is firmly secured to prevent a change in weight distribution while driving. ! Tongue load s08al0204 Tongue load Ensure that the trailer tongue load is from 8% to 11% of the total trailer weight and does not exceed the maximum value. For details about the trailer tongue load, refer to “Trailer hitch” “Trailer Hitch (Dealer Option)” P412. – CONTINUED – Trailer Towing 417 8 Driving Tips 1 Jack 2 Bathroom scale The tongue load can be weighed with a bathroom scale as shown in the illustration above. When weighing the tongue load, be sure to position the towing coupler at the height at which it would be during actual towing, using a jack as shown. F: Front The tongue load can be adjusted by proper distribution of the load in the trailer. Never load the trailer with more weight in the back than in the front; approximately 60 percent of the trailer load should be in the front and approximately 40 percent in the rear. Also, distribute the load as evenly as possible on both the left and right sides. Be sure that all cargo is firmly secured to prevent a change in weight distribution while driving. WARNING If the trailer is loaded with more weight in the back of trailer’s axle than in the front, the load is taken off the rear axle of the towing vehicle. This may cause the rear wheels to skid, especially during braking or when vehicle speed is reduced during cornering, resulting in oversteer, spin out and/or jackknifing. & Trailer Hitches (Dealer Option) s08al03 WARNING Never drill the frame or under-body of your vehicle to install a commercial trailer hitch. If you do, dangerous exhaust gas, water or mud may enter the passenger compartment through the drilled hole. Exhaust gas contains carbon monoxide, a colorless and odorless gas which is dangerous, or even lethal, if inhaled. Also, drilling the frame or underbody of your vehicle could cause deterioration of strength of your vehicle and cause corrosion around the drilled hole. CAUTION . Do not modify the vehicle exhaust system, brake system, or other systems when installing a 418 Trailer Towing hitch or other trailer towing equipment. . Do not use axle-mounted hitches as they can cause damage to the axle housing, wheel bearings, wheels or tires. Do not use a trailer hitch other than a genuine SUBARU trailer hitch. A genuine SUBARU trailer hitch is available from your SUBARU dealer. & When You Do Not Tow a Trailer s08al14 CAUTION . The housing should be kept dirt and corrosion-free at the points of contact. The surfaces only require cleaning with a cloth. Grease or other lubricants should never be used. . If the ball is not installed, the plastic insert and/or bumper cover should then be installed for protection and to prevent it from getting dirty. When the ball is not used, place the ball cap and store securely. & Connecting a Trailer s08al04 ! Trailer brakes s08al0401 WARNING . Adequate size trailer brakes are required when the trailer and its cargo exceed 1,000 lbs (453 kg) total weight. . Do not directly connect your trailer’s hydraulic brake system to the hydraulic brake system in your vehicle. Direct connection would cause the vehicle’s brake performance to deteriorate and could lead to an accident. If your trailer’s total weight (trailer weight plus its cargo weight) exceeds 1,000 lbs (453 kg), the trailer is required to be equipped with its own brake system. Electric brakes or surge brakes are recommended, and must be installed properly. Check that your trailer’s brakes conform with Federal, state/province and/or other applicable regulations. Your SUBARU’s brake system is not designed to be tapped into the trailer’s hydraulic brake system. Please ask your SUBARU dealer and professional trailer supplier for more information about the trailer’s brake system. ! Trailer safety chains s08al0402 WARNING Always use safety chains between your vehicle and the trailer. Towing trailer without safety chains could create a traffic safety hazard if the trailer separates from the hitch due to coupling damage or hitch ball damage. In case the trailer hitch connector or hitch ball should break or become disconnected, the trailer could get loose and create a traffic safety hazard. For safety, always connect the towing vehicle and trailer with trailer safety chains. Two chains should be used in total, one to the right side and the other to the left side trailer tongue. Pass the chains crossing each other under the trailer tongue to prevent the trailer from dropping onto the ground in the event the trailer tongue should disconnect from the hitch ball. Allow sufficient slack in the chains taking tight turn situations into account; however, be careful not to let them drag on the ground. – CONTINUED – Trailer Towing 419 8 Driving Tips ! Outside mirrors s08al0403 After hitching a trailer to your vehicle, check that the standard outside mirrors provide a good rearward field of view without significant blind spots. If significant blind spots occur with the vehicle’s standard outside mirrors, use towing mirrors that conform with Federal, state/province and/or other applicable regulations. ! Trailer lights s08al0404 CAUTION Direct splicing or other improper connection of trailer lights may damage your vehicle’s electrical system and cause a malfunction of your vehicle’s lighting system. Connection of trailer lights to your vehicle’s electrical system requires modifications to the vehicle’s lighting circuit to increase its capacity and accommodate wiring changes. To ensure the trailer lights are connected properly, please consult your SUBARU dealer. Check for proper operation of the turn signals and the brake lights each time you connect a trailer to your vehicle. ! Tires s08al0405 WARNING Never tow a trailer when the temporary spare tire is used. The temporary spare tire is not designed to sustain the towing load. Use of the temporary spare tire when towing can result in failure of the spare tire and/or less stability of the vehicle. Make sure that all the tires on your vehicle are properly inflated. Refer to “Tires” P507. Trailer tire condition, size, load rating and proper inflation pressure should be in accordance with the trailer manufacturer’s specifications. Also check federal, state, province and/or other applicable regulations. In the event your vehicle gets a flat tire when towing a trailer, ask a commercial road service representative or professional to repair the flat tire. If you carry a regular size spare tire in your vehicle or trailer as a precaution against getting a flat tire, be sure that the spare tire is firmly secured. & Trailer Towing Tips s08al05 CAUTION . For models equipped with the BSD (Blind Spot Detection) and RCTA (Rear Cross Traffic Alert) driving support systems, when towing a trailer, touch “Rear Vehicle Detection (BSD/RCTA)” to deactivate the system. The system may not operate properly due to the blocked radar waves. For details about how to turn on/off the BSD/RCTA, refer to “Car settings” P203. . For models equipped with the Reverse Automatic Braking (RAB) system, consult your SUBARU dealer for additional information about towing a trailer. 420 Trailer Towing . Never exceed 45 mph (72 km/h) when towing a trailer in hilly country on hot days. . When towing a trailer, steering, stability, stopping distance and braking performance will be different when compared to normal operation. For safety’s sake, you should employ extra caution when towing a trailer and you should never drive at excessive speeds. You should also keep the following tips in mind: . The braking power of the parking brake may not be sufficient when stronger braking power is needed (e.g., when parking on a steep slope while towing a trailer). If your vehicle is equipped with SI-DRIVE, and when towing a trailer on an uphill slope, do not drive in the Intelligent (I) mode. It is recommend that you drive in the Sport (S) mode. However, it is possible to tow a trailer in any mode of the SI-DRIVE on a downhill slope. ! Before starting out on a trip s08al0501 . Check the towing regulations for trailer or caravan vehicles that vary by state/ region. Failure to comply with the procedures set forth will not only compromise your safety, but will also negate your insurance coverage and/or may violate the state road and traffic acts and regulations. . Check that the vehicle and vehicle-tohitch mounting are in good condition. If any problems are apparent, do not tow the trailer. . Check that the vehicle rests horizontally with the trailer attached. If the vehicle is tipped sharply up at the front and down at the rear, check the total trailer weight, GVW, GAWs and tongue load again, then confirm that the load and its distribution are acceptable. . Check that the tire rating and pressures are correct. . Check that the vehicle and trailer are connected properly. Confirm that: – The trailer tongue is connected properly to the hitch ball. – The trailer lights connector is connected properly and trailer’s brake lights illuminate when the vehicle’s brake pedal is pressed, and that the trailer’s turn signal lights flash when the vehicle’s turn signal lever is operated. – The safety chains are connected properly. – All cargo in the trailer is secured safely in position. – The outside mirrors provide a good rearward field of view without a significant blind spot. . Sufficient time should be taken to learn the “feel” of the vehicle/trailer combination before starting out on a trip. In an area free of traffic, practice turning, stopping and backing up. ! Driving with a trailer s08al0502 . You should allow for considerably more stopping distance when towing a trailer. Avoid sudden braking because it may result in skidding or jackknifing and loss of control. . Avoid uneven steering, sharp turns and rapid lane changes. . Slow down before turning. Make a larger than normal turning radius because the trailer wheels will be closer than the vehicle wheels to the inside of the turn. In a tight turn, the trailer could hit your vehicle. . Crosswinds will adversely affect the handling of your vehicle and trailer, causing sway. Crosswinds can be due to weather conditions or the passing of large trucks or buses. If swaying occurs, firmly grip the steering wheel and promptly begin decelerating your vehicle at a gradual pace. – CONTINUED – Trailer Towing 421 8 Driving Tips . When passing other vehicles, considerable distance is required because of the added weight and length caused by attaching the trailer to your vehicle. . Reversing the vehicle with a trailer can be difficult and requires experience. Never accelerate or steer rapidly, and grip the bottom of the steering wheel with one hand. To reverse around a corner, perform the following procedure. 1. Reverse slowly and steer in the opposite direction to the way you want to turn. 2. Once the trailer begins to swing around, straighten the steering wheel. 3. Turn the wheel in the opposite direction. 4. Steer the vehicle around to be in line with the trailer, then straighten the steering again. . If the ABS warning light illuminates while the vehicle is in motion, stop towing the trailer and have repairs performed immediately by your nearest SUBARU dealer. ! Driving on grades s08al0503 . Before going down a steep hill, slow down and shift into lower gear (if necessary, use 1st gear) in order to utilize the engine braking effect and prevent overheating of your vehicle’s brakes. Do not make sudden downshifts. . When driving uphill in hot weather, the air conditioner may turn off automatically to protect the engine from overheating. . When driving uphill in hot weather, because the engine and transmission are relatively prone to overheating, pay attention to the following items. – Engine coolant temperature gauge – AT OIL TEMP warning light 422 Trailer Towing . If any of the following conditions occur, immediately turn off the air conditioner and stop the vehicle in the nearest safe location. Refer to “If You Park Your Vehicle in an Emergency” P426 and “Engine Overheating” P435. – Engine coolant temperature gauge needle approaches the OVERHEAT zone. Refer to “Engine Coolant Temperature Gauge” P154. – AT OIL TEMP warning light illuminates. Refer to “AT OIL TEMP Warning Light” P162. . Do not use the accelerator pedal to stay stationary on an uphill slope instead of using the parking brake or foot brake. That may cause the transmission fluid to overheat. ! Parking on a grade s08al0504 Always block the wheels under both vehicle and trailer when parking. Apply the parking brake firmly. You should not park on a hill or slope. If parking on a hill or slope cannot be avoided, you should take the following steps: 1. Apply the brakes and hold the pedal down. 2. Have someone place wheel blocks under both the vehicle and trailer wheels. 3. When the wheel blocks are in place, release the regular brakes slowly until the blocks absorb the load. 4. Apply the regular brakes and then apply the parking brake; slowly release the regular brakes. 5. Shift into the “P” position and shut off the engine. Trailer Towing 423 8 Driving Tips———————— — — — — — — — — s09 9-1. If You Park Your Vehicle in an Emergency. 426 9-2. Temporary Spare Tire. 426 9-3. Maintenance Tools 428 Tool Locations 428 9-4. Flat Tires . 429 Changing a Flat Tire . 429 Tire Pressure Monitoring System (TPMS) (U.S.-Spec. Models) 432 TPMS Screen (U.S.-Spec. Models) . 433 9-5. Jump Starting . 433 How to Jump Start 434 9-6. Engine Overheating 435 If Steam Is Coming from the Engine Compartment 435 If No Steam Is Coming from the Engine Compartment 435 9-7. Towing . 436 Towing Hook and Tie-Down Hooks/Holes 436 Using a Flat-Bed Truck . 439 Towing with All Wheels on the Ground . 439 9-8. Electronic Parking Brake – If the Electronic Parking Brake Cannot Be Released 440 9-9. Access Key Fob – If Access Key Fob Does Not Operate Properly 441 Locking and Unlocking. 441 Switching Power Status . 441 Starting Engine 442 9-10. Rear Gate – If the Rear Gate Cannot Be Opened.442 9-11. Malfunctions of the Center Information Display .443 9-12. Moonroof (If Equipped) – If the Moonroof Does Not Close .445 9-13. If Your Vehicle Is Involved in an Accident.445 To Restart the Engine When Involved in an Accident 445 Automatic Door Locking/Unlocking Operation When Involved in an Accident 445 In Case of Emergency 9 In Case of Emergency 9-1. If You Park Your Vehicle in an Emergency s09aa The hazard warning flasher should be used in day or night to warn other drivers when you have to park your vehicle under emergency conditions. Avoid stopping on the road. It is best to safely pull off the road if a problem occurs. The hazard warning flasher can be activated regardless of the ignition switch position. Turn on the hazard warning by pressing the hazard warning flasher switch. Turn it off by pressing the switch again. When the hazard warning flasher are flashing, the corresponding turn signal indicator will also flash. NOTE When the hazard warning flasher is on, the turn signals do not work. 9-2. Temporary Spare Tire s09ab WARNING . Never tow a trailer when the temporary spare tire is used. The temporary spare tire is not designed to sustain the towing load. Use of the temporary spare tire when towing can result in failure of the spare tire and/or less stability of the vehicle and may lead to an accident. . For U.S.-spec. models, when a spare tire is mounted or a wheel rim is replaced without the original pressure sensor/transmitter being transferred, the low tire pressure warning light will illuminate steadily after blinking for approximately one minute. This indicates the tire pressure monitoring system (TPMS) is unable to monitor all four road wheels. Contact your SUBARU dealer as soon as possible for tire and sensor replacement and/or system resetting. 426 If You Park Your Vehicle in an Emergency CAUTION . Never use any temporary spare tire other than the original. Using other sizes may result in severe mechanical damage to the drive train of your vehicle. . Always conform to the following instructions when using the temporary spare tire. Otherwise, a seriously dangerous situation may occur. The temporary spare tire is stored under the under-floor storage compartment. The temporary spare tire is smaller and lighter than a conventional tire and is designed for emergency use only. Remove the temporary spare tire and reinstall the conventional tire as soon as possible because the spare tire is designed only for temporary use. Check the inflation pressure of the temporary spare tire periodically to keep the tire ready for use. For the correct pressure, refer to “Temporary Spare Tires” P508. When using the temporary spare tire, note the following. . Drive with caution when the temporary spare tire is installed. Avoid hard acceleration and braking, or fast cornering, as control of the vehicle may be lost. . Do not exceed 50 mph (80 km/h). . Do not put a tire chain on the temporary spare tire. Because of the smaller tire size, a tire chain will not fit properly. . Do not use two or more temporary spare tires at the same time. . Do not drive over obstacles. This tire has a smaller diameter, so road clearance is reduced. 1 Tread wear indicator bar 2 Indicator location mark . When the wear indicator appears on the tread, replace the tire. . The temporary spare tire must be used only on a rear wheel. If a front wheel tire gets punctured, replace the wheel with a rear wheel and install the temporary spare tire in place of the removed rear wheel. Temporary Spare Tire 427 9 In Case of Emergency 9-3. Maintenance Tools s09ah Your vehicle is equipped with the following maintenance tools. . Jack . Jack handle . Screwdriver . Towing hook (eye bolt) . Wheel nut wrench & Tool Locations s09ah15 1 Jack handle 1 Wheel nut wrench* 2 Screwdriver 3 Jack 4 Towing hook (eye bolt) *: The shape of the wheel nut wrench differs depending on the vehicle model. The maintenance tools are stored under the under-floor storage compartment. For the method to use the jack, refer to “Flat Tires” P429. 428 Maintenance Tools 9-4. Flat Tires s09ac If you have a flat tire while driving, never brake suddenly; keep driving straight ahead while gradually reducing speed. Then slowly pull off the road to a safe place. & Changing a Flat Tire s09ac01 WARNING . Use only the jack and the jack handle provided with your vehicle. The jack supplied with the vehicle is designed only for changing a tire. Never get under the vehicle while supporting the vehicle with this jack. . Do not jack up the vehicle on an incline or a loose road surface. The jack can come out of the jacking point or sink into the ground and this can result in serious injury or death. . Before jacking up the vehicle, be sure that there are no occupants or cargo on board. . Do not jack up the vehicle with an object on or underneath the jack. The jack can be unstable and this can result in a severe accident. . Always turn off the engine before raising the flat tire off the ground using the jack. Never swing or push the vehicle supported with the jack. The jack can come out of the jacking point due to a jolt and this can result in serious injury or death. . All passengers must exit the vehicle before you raise it with the jack. Raising the vehicle with someone inside of it could result in serious injury or death. . Do not start the vehicle while it is supported by the jack. Doing so could result in serious injury or death. CAUTION Do not hit and bend the disc rotor backing plate when removing and installing the tire. A bent backing plate may scrape against the disc rotor and cause noise while the vehicle is in motion. NOTE Contact a SUBARU dealer when jacking up the vehicle using a garage jack. 1. Park on a hard, level surface, whenever possible, then stop the engine. 2. Apply the parking brake and place the select lever in the “P” position. 3. Turn on the hazard warning flasher and unload all occupants and luggage from the vehicle. 4. Put wheel blocks at the front and rear of the tire diagonally opposite the flat tire. 5. Take out the jack, jack handle and wheel nut wrench. The tools and the spare tire are stored under the floor of the cargo area. Refer to “Maintenance Tools” P428. – CONTINUED – Flat Tires 429 9 In Case of Emergency NOTE . Make sure that the jack is well lubricated before using it. . To take out the tools and spare tire, store the cargo area cover to the original position and open the under- floor storage. Refer to “Maintenance Tools” P428. 6. Take out the under-floor storage compartment and turn the attaching bolt counterclockwise, then take the spare tire out. NOTE Carefully read “Temporary Spare Tire” P426 and strictly follow the instructions. 7. Loosen the wheel nuts using the wheel nut wrench but do not remove the nuts. 8. Place the jack under the side sill at the front or rear jack-up point closest to the flat tire. 9. Turn the jackscrew by hand until the jack head engages firmly into the jackup point. 10. Insert the jack handle into the jackscrew, and turn the handle until the tire clears the ground. Do not raise the 430 Flat Tires vehicle higher than necessary. 11. Remove the wheel nuts and the flat tire. 12. Before putting the spare tire on, clean the mounting surface of the wheel and hub with a cloth. 13. Put on the spare tire. Replace the wheel nuts. Tighten them by hand. WARNING Do not use oil or grease on the wheel studs or nuts when the spare tire is installed. This could cause the nuts to become loose and lead to an accident. 14. Turn the jack handle counterclockwise to lower the vehicle. 15. Use the wheel nut wrench to securely tighten the wheel nuts to the specified torque, following the tightening order in the illustration. For the wheel nut tightening torque, refer to “Tires” P507. Never use your foot on the wheel nut wrench or a pipe extension on the wrench because you may exceed the specified torque. Have the wheel nut torque checked at the nearest automotive service facility. 1 Support holder 16. Store the flat tire in the spare tire compartment. Install with the support holder facing upward and secure the flat tire by firmly tightening the attaching bolt. NOTE If you cannot fix the flat tire firmly, try turning the support holder upside down. 17. Store the jack, jack handle and wheel nut wrench in their storage locations. – CONTINUED – Flat Tires 431 9 In Case of Emergency WARNING Never place a tire or tire changing tools in the passenger compartment after changing wheels. In a sudden stop or collision, loose equipment could strike occupants and cause injury. Store the tire and all tools in the proper place. & Tire Pressure Monitoring System (TPMS) (U.S.-Spec. Models) s09ac02 Low tire pressure warning light The tire pressure monitoring system provides the driver with the warning message indicated by sending a signal from a sensor that is installed in each wheel when tire pressure is severely low. The tire pressure monitoring system will activate only when the vehicle is driven. Also, this system may not react immediately to a sudden drop in tire pressure (for example, a blow-out caused by running over a sharp object). WARNING . If the low tire pressure warning light illuminates while driving, never brake suddenly. Instead, perform the following procedure. Otherwise an accident involving serious vehicle damage and serious personal injury could occur. (1) Keep driving straight ahead while gradually reducing speed. (2) Slowly pull off the road to a safe place. (3) Check the pressure for all four tires and adjust the pressure to the COLD tire pressure shown on the tire inflation pressure label on the door pillar on the driver’s side. If this light still illuminates while driving after adjusting the tire pressure, a tire may have significant damage and a fast leak that causes the tire to lose air rapidly. If you have a flat tire, refer to “Flat Tires” P429. . When a replacement tire is mounted or a wheel rim is replaced without the original pressure sensor/transmitter being transferred, the low tire pressure warning light will illuminate steadily after blinking for approximately one minute. This indicates the TPMS is unable to monitor all four road wheels. Contact your SUBARU dealer as soon as possible for tire and sensor replacement and/or system resetting. 432 Flat Tires & TPMS Screen (U.S.-Spec. Models) s09ac05 This screen displays each tire pressure. Refer to “Basic Screens” P185. 9-5. Jump Starting s09ad WARNING . Battery fluid is SULFURIC ACID. Do not let it come in contact with the eyes, skin, clothing or the vehicle. If battery fluid gets on you, thoroughly flush the exposed area with water immediately. Get medical help if the fluid has entered your eyes. If battery fluid is accidentally swallowed, immediately drink a large amount of milk or water, and obtain immediate medical help. Keep everyone including children away from the battery. . The gas generated by a battery explodes if a flame or spark is brought near it. Do not smoke or light a match while jump starting. . Never attempt jump starting if the discharged battery is frozen. It could cause the battery to burst or explode. . Whenever working on or around a battery, always wear suitable eye protectors, and remove metal objects such as rings, bands or other metal jewelry. . Be sure the jumper cables and clamps on them do not have loose or missing insulation. . Do not jump start unless cables in suitable condition are available. . A running engine can be dangerous. Keep your fingers, hands, clothing, hair and tools away from the cooling fan, drive belt and any other moving engine parts. Removing rings, watches and ties is advisable. . Jump starting is dangerous if it is done incorrectly. If you are unsure about the proper procedure for jump starting, consult a competent mechanic. When your vehicle does not start due to a run down (discharged) battery, the vehicle may be jump started by connecting your battery to another battery (called the booster battery) with jumper cables. – CONTINUED – Jump Starting 433 9 In Case of Emergency & How to Jump Start s09ad01 A Booster battery B Strut mounting nut 1. Make sure the booster battery is 12 volts and the negative terminal is grounded. 2. If the booster battery is in another vehicle, do not let the two vehicles touch. 3. Turn off all unnecessary lights and accessories. 4. Connect the jumper cables exactly in the sequence illustrated. (1) Connect one jumper cable to the positive (+) terminal on the discharged battery. (2) Connect the other end of the jumper cable to the positive (+) terminal of the booster battery. (3) Connect one end of the other cable to the negative (−) terminal of the booster battery. (4) Connect the other end of the cable to the strut mounting nut. Make sure that the cables are not near any moving parts and that the cable clamps are not in contact with any other metal. 5. Start the engine of the vehicle with the booster battery and run it at moderate speed. Then start the engine of the 434 Jump Starting vehicle that has the discharged battery. 6. When finished, carefully disconnect the cables in exactly the reverse order. 9-6. Engine Overheating s09ae WARNING Never remove the radiator cap until the engine has been shut off and has fully cooled down. When the engine is hot, the coolant is under pressure. Removing the cap while the engine is still hot could release a spray of boiling hot coolant, which could burn you very seriously. CAUTION If the engine overheats, the engine speed or the vehicle speed may be reduced. Stop the vehicle in a safe place immediately. & If Steam Is Coming from the Engine Compartment s09ae01 Turn off the engine and get everyone away from the vehicle until it cools down. & If No Steam Is Coming from the Engine Compartment s09ae02 NOTE For details about how to check the coolant level or how to add coolant, refer to “Engine Coolant” P468. 1. Keep the engine running at idling speed. 2. Open the hood to ventilate the engine compartment. Refer to “Engine Hood” P462. 3. Confirm that the cooling fan is turning. If the fan is not turning, immediately turn off the engine and contact your authorized dealer for repair. 4. After the engine coolant temperature has dropped, turn off the engine. If the temperature gauge stays in the overheated zone, turn off the engine. 5. After the engine has fully cooled down, check the coolant level in the reserve tank. If the coolant level is below the “LOW” mark, add coolant up to the “FULL” mark. 6. If there is no coolant in the reserve tank, add coolant to the reserve tank. Then remove the radiator cap and fill the radiator with coolant. – CONTINUED – Engine Overheating 435 9 In Case of Emergency If you remove the radiator cap from a hot radiator, first wrap a thick cloth around the radiator cap, then turn the cap counterclockwise slowly without pressing down until it stops. Release the pressure from the radiator. After the pressure has been fully released, remove the cap by pressing down and turning it. 9-7. Towing s09af WARNING Never tow AWD models with the front wheels raised off the ground while the rear wheels are on the ground, or with the rear wheels raised off the ground while the front wheels are on the ground. This will cause the vehicle to spin away due to the operation or deterioration of the center differential. If towing is necessary, SUBARU recommends it be done by your SUBARU dealer or a commercial towing service. & Towing Hook and Tie-Down Hooks/Holes s09af01 The towing hooks should be used only in an emergency. SUBARU recommends towing be done by your SUBARU dealer or a commercial towing service. CAUTION . Use only the specified towing hook and tie-down hooks/holes. Never use suspension parts or other parts of the body for towing or tie-down purposes. . Never use the tie-down hole closest to the muffler under the vehicle for towing purposes. Front towing hook: 1. Take out the screwdriver, towing hook and jack handle from the under-floor storage compartment. 436 Towing 2. Cover the tip of a flat-head screwdriver with vinyl tape or cloth so that it will not scratch the bumper. Insert the flathead screwdriver into the cutout of the cover and pry open the cover. 3. Screw the towing hook into the threaded hole until the threads can no longer be seen. 4. Tighten the towing hook securely using the jack handle. After towing, remove the towing hook from the vehicle and stow it in the under-floor storage compartment. Fit the towing hook cover on the bumper. WARNING . Do not use the towing hook for purposes other than towing your vehicle. . Be sure to remove the towing hook after towing. Leaving the towing hook mounted on the vehicle could interfere with proper operation of the SRS airbag system in a frontal collision. CAUTION To prevent deformation to the bumper and the towing hook, do not apply an excessive load to the towing hook. Rear towing hook: 1. Take out the screwdriver, towing hook and jack handle from the under-floor storage compartment. 2. Cover the tip of a flat-head screwdriver with vinyl tape or cloth so that it will not scratch the bumper. Insert the flathead screwdriver into the cutout of – CONTINUED – Towing 437 9 In Case of Emergency the cover and pry open the cover. 3. Screw the towing hook into the threaded hole until its thread can no longer be seen. 4. Tighten the towing hook securely using the jack handle. After towing, remove the towing hook from the vehicle and stow it in the under-floor storage compartment. Fit the towing hook cover on the bumper. WARNING . Do not use the towing hook for purposes other than towing your vehicle. . Be sure to remove the towing hook after towing. Leaving the towing hook mounted on the vehicle could interfere with proper operation of the fuel pump shut off function when the vehicle is struck from behind. . For vehicles equipped with the BSD/RCTA, turn off the BSD/ RCTA before towing a trailer. A trailer will block the system’s radar waves and cause the BSD/ RCTA not to function correctly. CAUTION To prevent deformation to the bumper and the towing hook, do not apply an excessive load to the towing hook. Front tie-down hooks: The front tie-down hooks are located between each of the front tires and the front bumper. Front tie-down hooks are for tying down the vehicle. They are not for towing. 438 Towing Rear tie-down holes: 1 Rear tie-down hole The rear tie-down holes are located near each of the jack-up reinforcements. There is a plug in each rear tie-down hole. To use the rear tie-down holes, remove the plugs. After using the rear tie-down holes, return the plugs to their original places. WARNING Use the rear tie-down holes only for downward anchoring. If they are used to anchor the vehicle in any other direction, cables may slip out of the holes, possibly causing a dangerous situation. & Using a Flat-Bed Truck s09af02 This is the best way to transport your vehicle. Use the following procedures to ensure safe transportation. 1. Shift the select lever into the “P” position. 2. Apply the parking brake firmly. 3. Secure the vehicle onto the carrier properly with safety chains. Each safety chain should be equally tightened and care must be taken not to pull the chains so tightly that the suspension bottoms out. CAUTION Transport by flat-bed truck may cause the headlights to become misaligned. In such a case, have the headlight alignment checked by a SUBARU dealer after transporting the vehicle by flat-bed truck. & Towing with All Wheels on the Ground s09af03 – CONTINUED – Towing 439 9 In Case of Emergency WARNING . Never turn the ignition switch to the “LOCK”/“OFF” position while the vehicle is being towed because the steering wheel and the direction of the wheels will be locked. . Remember that the brake booster and power steering do not function when the engine is not running. Because the engine is turned off, it will take greater effort to operate the brake pedal and steering wheel. CAUTION . If transmission failure occurs, transport your vehicle on a flatbed truck. . Sometime damaged vehicles cannot be towed because of their damaged condition. In that case, use a flat-bed truck for transportation. . The traveling speed must be limited to less than 20 mph (32 km/h) and the traveling distance to less than 31 miles (50 km). For greater speeds and distances, transport your vehicle on a flatbed truck. . Use a flat-bed truck if there are long distance downgrades or steep slopes. However, do not apply the brake pedal for a long time because the engine braking will not work while towing. Doing so could overheat the brake. . Drive carefully and do not make an impact on the towing rope by suddenly starting. . Use a specific towing rope for towing. If wire ropes and metal chains are needed to be used for towing, wrap the contact portion of the bumper with cloth to protect it from damage. 1. Release the parking brake and put the transmission in neutral. 2. The ignition switch should be in the “ON” position while the vehicle is being towed. 3. Take up slack in the towline slowly to prevent damage to the vehicle. 9-8. Electronic Parking Brake – If the Electronic Parking Brake Cannot Be Released s09an Contact your SUBARU dealer and have your SUBARU dealer release the electronic parking brake. 440 Electronic Parking Brake – If the Electronic Parking Brake Cannot Be Released 9-9. Access Key Fob – If Access Key Fob Does Not Operate Properly s09ap CAUTION Keep metallic objects, magnetic sources and signal transmitters away from the area between the access key fob and the push-button ignition switch. They may interfere with the communication between the access key fob and the pushbutton ignition switch. The following functions may be inoperable because of strong radio signals in the surrounding area or a low battery condition of the access key fob. . Locking/unlocking all the doors including rear gate . Switching the power status . Starting the engine In such cases, perform the following procedure. When the battery of the access key fob is discharged, replace it with a new one. Refer to “Replacing Battery of Access Key Fob” P497. & Locking and Unlocking s09ap01 1 Release button 2 Emergency key While pressing the release button of the access key fob, take out the emergency key. Lock or unlock the driver’s door with the emergency key in the procedure described in “Locking and Unlocking from the Outside” P128. NOTE After locking or unlocking, be sure to attach the emergency key back to the access key fob. & Switching Power Status s09ap02 1. Apply the parking brake. 2. Place the select lever in the “P” position. 3. Depress the brake pedal. 4. Hold the access key fob with the buttons facing you, and touch the push-button ignition switch with it. When the communication between the access key fob and the vehicle is completed, a chime (ding) will sound. At the same time, the status of the push-button ignition switch changes to either of the following. . When the keyless access with pushbutton start system is deactivated: “ACC” . Under other conditions: “ON” – CONTINUED – Access Key Fob – If Access Key Fob Does Not Operate Properly 441 9 In Case of Emergency 5. When the keyless access with pushbutton start system is deactivated, press the push-button ignition switch with the brake pedal released. The status of the push-button ignition switch then changes to “ON”. NOTE If the power does not switch even though the above procedure was followed precisely, contact your SUBARU dealer. & Starting Engine s09ap03 1. Apply the parking brake. 2. Place the select lever in the “P” position. 3. Depress the brake pedal. 4. Hold the access key fob with the buttons facing you, and touch the push-button ignition switch with it. When the communication between the access key fob and the vehicle is completed, a chime (ding) will sound. At the same time, the push-button ignition switch turns to the “ACC” or “ON” position. 5. After the push-button ignition switch turns to the “ACC” or “ON” position, while depressing the brake pedal, press the push-button ignition switch. NOTE If the engine does not start even though the above procedure was followed precisely, contact your SUBARU dealer. 9-10. Rear Gate – If the Rear Gate Cannot Be Opened s09ag In the event that you cannot open the rear gate by pressing the rear gate opener button, you can open it from inside the cargo area. 1. Cover the tip of a flat-head screwdriver with vinyl tape or cloth so that it will not scratch. Remove the access cover at the bottom-center of the rear gate trim using flat-head screwdriver. 442 Rear Gate – If the Rear Gate Cannot Be Opened CAUTION Never operate the rear gate lock release lever with your fingers because doing so may cause an injury. Always use a flat-head screwdriver or a similar tool. 1 Rear gate lock release lever 2. Turn the rear gate lock release lever to the right position using a flat-head screwdriver or a similar tool. Then the rear gate will open. 9-11. Malfunctions of the Center Information Display s09av If the following screens are displayed, temporary errors or malfunctions may occur in the center information display. If they are only temporary errors, the following procedure may help to eliminate them. Shutting down the screen Freezing the screen Blacking out the screen – CONTINUED – Malfunctions of the Center Information Display 443 9 In Case of Emergency Error A Error B 1. Park the vehicle in a safe place. 2. Turn the ignition switch once to the “LOCK/OFF” position, then start the engine. 1 Volume button (dual 7.0-inch display models) 1 Volume button (11.6-inch display models) 3. If the center information display cannot be recovered even though the engine has been restarted, press and hold the volume button for more than 10 seconds. The center information display will start up again. 4. If the center information display is not recovered by restarting it, contact your SUBARU dealer. 444 Malfunctions of the Center Information Display 9-12. Moonroof (If Equipped) – If the Moonroof Does Not Close s09aj If the moonroof does not close, have the system checked by a SUBARU dealer. 9-13. If Your Vehicle Is Involved in an Accident s09ar & To Restart the Engine When Involved in an Accident s09ar02 CAUTION If your vehicle is involved in an accident, be sure to inspect the ground under the vehicle before restarting the engine. If you find that fuel has leaked on the ground, do not try to restart the engine. The fuel system has been damaged and is in need of repair. Immediately contact the nearest automotive service facility. Consult your SUBARU dealer. Your vehicle has a fuel pump shut off system. When the vehicle sustains an impact in an accident, etc., the fuel pump shut off system stops supplying the fuel in order to minimize fuel leakage. However, depending on the impact conditions at the time of collision, the fuel pump shut-off system may not operate. Perform the following procedures to restart the engine after the system is activated. Models without “keyless access with push-button start system”: 1. Turn the ignition switch to the “LOCK” or “ACC” position. 2. Restart the engine. Models with “keyless access with push-button start system”: 1. Turn the push-button ignition switch to the “ACC” or “OFF” position. 2. Restart the engine. & Automatic Door Locking/Unlocking Operation When Involved in an Accident s09ar03 When the automatic door locking/unlocking function is ON, all the doors will be locked automatically while driving. For further details, refer to “Automatic Door Locking/Unlocking” P131. When the vehicle sustains a strong impact which may trigger the airbags to deploy, the door locks may be unlocked automatically to enable emergency escape. Generally, an impact sustained from a rear end collision does not trigger the airbags to deploy. However if the impact is strong enough to deploy the airbags, it can also trigger the unlocking function. Under such circumstance, the automatic door locking/unlocking function will be – CONTINUED – Moonroof – If the Moonroof Does Not Close 445 9 In Case of Emergency suspended and the doors will remain unlocked. Confirm the safety of the surroundings first and carry out the following to retrieve the automatic door locking/unlocking function. Models without “keyless access with push-button start system”: 1. Turn the ignition switch to the “LOCK” position. 2. Turn the ignition switch to the “ON” position. Models with “keyless access with push-button start system”: 1. Turn the push-button ignition switch to the “OFF” position. 2. Turn the push-button ignition switch to the “ON” position. NOTE Depending on the severity of the impact, the emergency unlocking may not function. CAUTION If the following occur, there may be a malfunction in the system. Have the system inspected by a SUBARU dealer. . The doors unlock automatically while driving. . With all doors shut, the doors unlock when pressing the lock side of the power door locking switch. . The automatic door locking/unlocking function does not operate. 446 If Your Vehicle Is Involved in an Accident s10 10-1. Exterior Care . 448 Washing . 448 Waxing and Polishing . 449 Cleaning Alloy Wheels 449 10-2. Corrosion Protection 450 Most Common Causes of Corrosion 450 To Help Prevent Corrosion 450 10-3. Cleaning the Interior .451 Seat Fabric Material . 451 Leather Seat Materials 451 Synthetic Leather Upholstery . 452 Instrument Panel, Console Panel, Switches, Combination Meter, and Other Plastic Surface 452 Center Information Display . 452 Appearance Care 10 Appearance Care 10-1. Exterior Care s10aa & Washing s10aa01 CAUTION . When washing the vehicle, the brakes may get wet. As a result, the brake stopping distance will be longer. To dry the brakes, drive the vehicle at a safe speed while lightly pressing the brake pedal to heat up the brakes. . Do not wash the engine compartment and areas adjacent to it. If water enters the engine air intake or electrical parts, it will cause engine trouble or a malfunction of the power steering. . When washing inner fenders, underbody, bumpers and protruding objects such as exhaust pipes and exhaust finishers, be careful to prevent injuries from contacting sharp ends. . Do not use any organic solvents when washing the surface of the bulb assembly cover. However, if a detergent with organic solvents is used to wash the cover surface, completely rinse off the detergent with water. Otherwise, the cover surface may be damaged. . If the climate control system is operating when you wash the vehicle, do not set the air inlet selection of the climate control to outside air circulation mode. There is a risk that water may enter the vehicle through the air inlets. NOTE When having your vehicle washed in an automatic car wash, make sure beforehand that the car wash is of suitable type. The best way to preserve your vehicle’s beauty is frequent washing. Wash the vehicle at least once a month to avoid contamination by road grime. Wash dirt off with a wet sponge and plenty of lukewarm or cold water. Do not wash the vehicle with hot water and in direct sunlight. Salt, chemicals, insects, tar, soot, tree sap, and bird droppings should be washed off by using a light detergent, as required. If you use a light detergent, make certain that it is a neutral detergent. Do not use strong soap or chemical detergents. All cleaning agents should be promptly flushed from the surface and not allowed to dry there. Rinse the vehicle thoroughly with plenty of lukewarm water. Wipe the remaining water off with a chamois or soft cloth. Wear rubber gloves and use a hand brush when washing down underbody, inner fenders and suspension to effectively remove mud and dirt off. ! Washing the underbody s10aa0101 Chemicals, salts and gravel used for deicing road surfaces are extremely corrosive, accelerating the corrosion of underbody components, such as the exhaust system, fuel and brake lines, brake cables, floor pan and fenders, and suspension. Thoroughly flush the underbody and inside of the fenders with lukewarm or cold water at frequent intervals to reduce the harmful effects of such agents. Mud and sand adhering to the underbody components may accelerate their corrosion. After driving off-road or on muddy or sandy roads, wash the mud and sand off the underbody. Carefully flush the suspension and axle parts, as they are particularly prone to mud and sand buildup. Do not use a sharpedged tool to remove caked mud. 448 Exterior Care CAUTION . Be careful not to damage brake hoses, sensor harnesses, and other parts when washing suspension components. . Be careful not to flush the engine bottom for a long time. It may cause damage of some electrical parts. ! Using a warm water washer s10aa0102 . Keep a good distance of 12 in (30 cm) or more between the washer nozzle and the vehicle. . Do not wash the same area continuously. . If a stain will not come out easily, wash by hand. Some warm water washers are of the high temperature, high pressure type, and they can damage or deform the resin parts such as mouldings, or cause water to leak into the vehicle. & Waxing and Polishing s10aa02 Always wash and dry the vehicle before waxing and polishing. Use a good quality polish and wax and apply them according to the manufacturer’s instructions. Wax or polish when the painted surface is cool. Be sure to polish and wax the chrome trim, as well as the painted surfaces. Loss of wax on a painted surface leads to loss of the original luster and also quickens the deterioration of the surface. It is recommended that a coat of wax be applied at least once a month, or whenever the surface no longer repels water. If the appearance of the paint has diminished to the point where the luster or tone cannot be restored, lightly polish the surface with a fine-grained compound. Never polish just the affected area, but include the surrounding area as well. Always polish in only one direction. A No. 2000 grain compound is recommended. Never use a coarse-grained compound. Coarser grained compounds have a smaller grainsize number and could damage the paint. After polishing with a compound, coat with wax to restore the original luster. Frequent polishing with a compound or an incorrect polishing technique will result in removing the paint layer and exposing the undercoat. When in doubt, it is always best to contact your SUBARU dealer or an auto paint specialist. CAUTION Do not use any agents with organic solvents on the surface of the bulb assembly cover. However, if a polish or wax with organic solvents is applied to the cover surface, completely wipe off the polish or wax. Otherwise, the cover surface may be damaged. NOTE Be careful not to block the windshield washer nozzles with wax when waxing the vehicle. & Cleaning Alloy Wheels s10aa04 . Promptly wipe the alloy wheels clean of any kind of grime or agent. If dirt is left on too long, it may be difficult to clean off. . Do not use soap containing grit to clean the wheels. Be sure to use a neutral cleaning agent, and later rinse thoroughly with water. Do not clean the wheels with a stiff brush or expose them to a high-speed washing device. . Clean the vehicle (including the alloy wheels) with water as soon as possible when it has been splashed with sea – CONTINUED – Exterior Care 449 10 Appearance Care water, exposed to sea breezes, or driven on roads treated with salt or other agents. 10-2. Corrosion Protection s10ab Your SUBARU has been designed and built to resist corrosion. Special materials and protective finishes have been used on most parts of the vehicle to help maintain fine appearance, strength, and reliable operation. & Most Common Causes of Corrosion s10ab01 The most common causes of corrosion are: . The accumulation of moisture retaining dirt and debris in body panel sections, cavities, and other areas. . Damage to paint and other protective coatings caused by gravel and stone chips or minor accidents. Corrosion is accelerated on the vehicle when: . It is exposed to road salt or dust control chemicals, or used in coastal areas where there is more salt in the air, or in areas where there is considerable industrial pollution. . It is driven in areas of high humidity, especially when temperatures range just above freezing. . Dampness in certain parts of the vehicle remains for a long time, even though other parts of the vehicle may be dry. . High temperatures will cause corrosion to parts of the vehicle which cannot dry quickly due to lack of proper ventilation. & To Help Prevent Corrosion s10ab02 Wash the vehicle regularly to prevent corrosion of the body and suspension components. Also, wash the vehicle promptly after driving on any of the following surfaces. . Roads that have been salted to prevent them from freezing in winter . Mud, sand, or gravel . Coastal roads After the winter has ended, it is recommended that the underbody be given a very thorough washing. Before the beginning of winter, check the condition of underbody components, such as the exhaust system, fuel and brake lines, brake cables, suspension, steering system, floor pan, and fenders. If any of them are found to be rusted, they should be given an appropriate rust prevention treatment or should be replaced. Contact your SUBARU dealer to perform this kind 450 Corrosion Protection of maintenance and treatment if you need assistance. Repair chips and scratches in the paint as soon as you find them. Check the interior of the vehicle for water and dirt accumulation under the floor mats because that could cause corrosion. Occasionally check under the mats to make sure the area is dry. Keep your garage dry. Do not park your vehicle in a damp, poorly ventilated garage. In such a garage, corrosion can be caused by dampness. If you wash the vehicle in the garage or put the vehicle into the garage when wet or covered with snow, that can cause dampness. If your vehicle is operated in cold weather and/or in areas where road salts and other corrosive materials are used, the door hinges and locks, rear gate lock, and hood latch should be inspected and lubricated periodically. 10-3. Cleaning the Interior s10ac Use a soft, damp cloth to clean the climate control panel, audio equipment, instrument panel, center console, combination meter panel, and switches. (Do not use organic solvents.) & Seat Fabric Material s10ac01 Remove loose dirt, dust or debris with a vacuum cleaner. If the dirt is caked on the fabric or hard to remove with a vacuum cleaner, use a soft brush then vacuum it. Wipe the fabric surface with a tightly wrung cloth and dry the seat fabric thoroughly. If the fabric is still dirty, wipe using a solution of mild soap and lukewarm water then dry thoroughly. If the stain does not come out, try a commercially available fabric cleaner. Use the cleaner on a hidden place and make sure it does not affect the fabric adversely. Use the cleaner according to its instructions. CAUTION When cleaning the seat, do not use benzine, paint thinner, or any similar materials. Doing so could damage the surface and cause the color to deteriorate. & Leather Seat Materials s10ac02 The leather used by SUBARU is a high quality natural product which will retain its distinctive appearance and feel for many years with proper care. Allowing dust or road dirt to build up on the surface can cause leather to become brittle and wear prematurely. To maintain its resiliency, leather should be cleaned monthly or whenever it becomes soiled. Before cleaning leather upholstery, vacuum it to remove dust. Use a soft and lint-free cloth dampened with lukewarm water and mild soap, taking care not to soak the leather or allow water to penetrate the stitched seams. Use a gentle circular motion while cleaning the leather – do not rub or apply extreme pressure. Wipe the leather again with another clean, slightly damp cloth to remove soap residue and dry with a soft cloth. Minor surface blemishes or difficult dirt spots may be treated with a commercial leather spray. Never use alcohol, cleaning solvents, leather oils, varnishes or polishes on your leather as it will dry out the leather finish. – CONTINUED – Cleaning the Interior 451 10 Appearance Care If your SUBARU is to be parked for a long time in bright sunlight, it is recommended that the seats and headrests be covered, or the windows shaded, to prevent fading or shrinkage. You will discover that each leather seat section will develop soft folds or wrinkles, which is characteristic of genuine leather. & Synthetic Leather Upholstery s10ac03 The synthetic leather material used on the SUBARU may be cleaned using mild soap or detergent and water, after first vacuuming or brushing away loose dirt. Allow the soap to soak in for a few minutes and wipe off with a clean, damp cloth. Commercial foam-type cleaners suitable for synthetic leather materials may be used when necessary. CAUTION Strong cleaning agents such as solvents, paint thinners, window cleaner or gasoline must never be used on leather or synthetic interior materials. Doing so could damage the surface and cause the color to deteriorate. & Instrument Panel, Console Panel, Switches, Combination Meter, and Other Plastic Surface s10ac04 Use a soft, damp cloth to clean the instrument panel, center console, combination meter panel, and switches. CAUTION . Do not use organic solvents such as paint thinners or gasoline, or strong cleaning agents that contain those solvents. Doing so could damage the surface and cause the color to deteriorate. . Do not use chemical solvents that contain silicone on the vehicle audio system, electrical components of the air-conditioner or any switches. If silicone adheres to these parts, it may cause damage to electrical components. & Center Information Display s10ac11 To clean the center information display, wipe it with a silicone cloth or with a soft cloth. If the display(s) is/are extremely dirty, clean it with a soft cloth moistened with neutral detergent then carefully wipe off any remaining detergent. CAUTION . Do not spray neutral detergent directly onto the display(s). Doing so could damage the monitor’s components. . Do not wipe the display(s) with a hard cloth. Doing so could scratch the monitor. . Do not use cleaning fluid that contains thinner, gasoline, or any other volatile substance. Such cleaning fluid could erase the lettering on the switches on the display(s). 452 Cleaning the Interior

[/comment]

SEOCONTENT-START

s11 11-1. Maintenance Schedule . 457 11-2. Maintenance Precautions . 457 Before Checking or Servicing in the Engine Compartment 458 When Checking or Servicing in the Engine Compartment 459 When Checking or Servicing in the Engine Compartment While the Engine Is Running . 459 11-3. Maintenance Tips 460 When Replacing Parts 460 Removing and Reinstalling Clips 460 11-4. Engine Hood 462 11-5. Engine Compartment Overview . 464 11-6. Engine Oil 465 Engine Oil Consumption . 465 Checking the Oil Level 465 Changing the Oil and Oil Filter 466 Recommended Grade and Viscosity 467 Synthetic Oil. 467 11-7. Cooling System. 467 Cooling Fan, Hose and Connections . 468 Engine Coolant. 468 11-8. Air Cleaner Element 469 Replacing the Air Cleaner Element 470 11-9. Spark Plugs . 471 Recommended Spark Plugs 471 11-10. Drive Belt . 471 11-11. Continuously Variable Transmission Fluid . 471 11-12. Front Differential Gear Oil and Rear Differential Gear Oil 472 Recommended Grade and Viscosity . 472 11-13. Brake Fluid.472 Checking the Fluid Level 472 Recommended Brake Fluid. 473 11-14. Brake Pedal473 11-15. Replacement of Brake Pad .473 Breaking-In of New Brake Pads 474 11-16. Tires and Wheels .474 Types of Tires 474 Tire Pressure Monitoring System (TPMS) (U.S.-Spec. Models) 475 Tire Inspection . 476 Tire Pressures and Wear 477 Wheel Balance . 479 Wear Indicators 479 Rotational Direction of Tires. 480 Tire Rotation 480 Tire Replacement . 481 Wheel Replacement 482 11-17. Alloy Wheels 482 11-18. Windshield Washer Fluid 483 11-19. Replacement of Wiper Blades 484 Windshield Wiper Blade Assembly . 485 Window Wiper Blade Rubber 486 Rear Window Wiper Blade Assembly 487 Rear Window Wiper Blade Rubber 487 11-20. Battery 488 Maintenance and Service 11 Maintenance and Service 11-21. Fuses . 490 11-22. Installation of Accessories. 491 11-23. Replacing Bulbs 491 Headlights 492 Front Turn Signal Light, Position Light and Front Side Marker Light (If Equipped) 492 Rear Combination Lights 492 Back-Up Light 493 License Plate Light 494 Other Bulbs . 495 Adjusting Headlight Aim. 495 11-24. Replacing Battery 496 Replacing Battery of Access Key Fob. 497 Replacing Battery of Transmitter 498 Maintenance and Service 11-1. Maintenance Schedule s11aa U.S. models The scheduled maintenance items required to be serviced at regular intervals are shown in the “Warranty and Maintenance Booklet”. For details, read the separate “Warranty and Maintenance Booklet”. Canada models The scheduled maintenance items required to be serviced at regular intervals are shown in the “Warranty and Service Booklet”. For details, read the separate “Warranty and Service Booklet”. Except for U.S. and Canada models Some items of your vehicle are required to be serviced at scheduled intervals. For details about your maintenance schedule, read the separate “Warranty and Maintenance Booklet”. 11-2. Maintenance Precautions s11ab When maintenance and service are required, it is recommended that all work be done by an authorized SUBARU dealer. If you perform maintenance and service by yourself, you should familiarize yourself with the information provided in this section on general maintenance and service for your SUBARU. Incorrect or incomplete service could cause improper or unsafe vehicle operation. Any problems caused by improper maintenance and service performed by you are not eligible for warranty coverage. WARNING . Testing of an All-Wheel Drive vehicle must NEVER be performed on a single two-wheel dynamometer or similar apparatus. Attempting to do so will result in transmission damage and in uncontrolled vehicle movement and may cause an accident or injuries to persons nearby. . Always select a safe area when performing maintenance on your vehicle. . Always be very careful to avoid injury when working on the vehicle. Remember that some of the materials in the vehicle may be hazardous if improperly used or handled, for example, battery acid. . Your vehicle should only be serviced by persons fully competent to do so. Serious personal injury may result to persons not experienced in servicing vehicles. . Always use the proper tools and make certain that they are well maintained. . Never get under the vehicle supported only by a jack. Always use safety stands to support the vehicle. . Never keep the engine running in a poorly ventilated area, such as a garage or other closed areas. . Do not smoke or allow open flames around the fuel or battery. This will cause a fire. . Because the fuel system is under pressure, replacement of the fuel filter should be performed only by your SUBARU dealer. – CONTINUED – Maintenance Schedule 457 11 Maintenance and Service . Wear adequate eye protection to guard against getting oil or fluids in your eyes. If something does get in your eyes, thoroughly wash them out with clean water. . Do not tamper with the wiring of the SRS airbag system or seatbelt pretensioner system, or attempt to take its connectors apart, as that may activate the system or it can render it inoperative. NEVER use a circuit tester for these wiring. If your SRS airbag or seatbelt pretensioner needs service, consult your nearest SUBARU dealer. . Check the inside of the engine compartment to see if there are any cloths and tools left. If they are left inside, they may be a cause of malfunction and fire. NOTE SUBARU does not endorse the use of non-SUBARU approved flushing systems and strongly advises against performing these services on a SUBARU vehicle. Non-SUBARU approved flushing systems use chemicals and/or solvents which have not been tested or approved by SUBARU. SUBARU warranties do not cover any part of the vehicle which is damaged by adding or applying chemicals and/or solvents other than those approved or recommended by SUBARU. & Before Checking or Servicing in the Engine Compartment s11ab01 WARNING . Always stop the engine and apply the parking brake to prevent the vehicle from moving. . Always let the engine cool down. Engine parts become very hot when the engine is running and remain hot for some time after the engine is stopped. . Do not spill engine oil, engine coolant, brake fluid or any other fluid on hot engine components. This may cause a fire. . When the ignition switch is in the “ON” position, the cooling fan may operate suddenly even when the engine is stopped. If your body or clothes come into contact with a rotating fan, that could result in serious injury. To avoid risk of injury, perform the following precautions. – Models with push-button start system: Always turn the push-button ignition switch to the “OFF” position and confirm that the operation indicator on the switch is turned off. Then take the access key fob out from the vehicle. – Models without push-button start system: Always remove the key from the ignition switch. . Before performing any servicing on a vehicle equipped with a remote engine start system temporarily place that system in the service mode to prevent it from unexpectedly starting the engine. 458 Maintenance Precautions & When Checking or Servicing in the Engine Compartment s11ab03 CAUTION . Do not contact the belt cover while checking the components in the engine compartment. Doing so may cause your hand to slip off the belt cover and result in an unexpected injury. . Do not touch the oil filter until the engine has cooled down completely. Doing so may result in a burn or other injury. Note that the oil filter becomes very hot when the engine is running and remains hot for some time after the engine has stopped. & When Checking or Servicing in the Engine Compartment While the Engine Is Running s11ab02 WARNING A running engine can be dangerous. Keep your fingers, hands, clothing, hair and tools away from the cooling fan, drive belt and any other moving engine parts. Removing rings, watches and ties is advisable. 1 Safety stand For any maintenance and inspection performed on AWD models which requires a running engine and wheels turning, jack up all four wheels or use free rollers to prevent the vehicle from moving. Never race the engine or brake suddenly. Maintenance Precautions 459 11 Maintenance and Service 11-3. Maintenance Tips s11bi & When Replacing Parts s11bi04 For information about replacement parts for maintenance, contact any authorized SUBARU dealer or repairer, or another duly qualified and equipped professional. & Removing and Reinstalling Clips s11bi01 Some clips and fender linings must be removed before replacing the air cleaner element or specific bulbs. ! Removing clips s11bi0101 There are several types of clips used for your vehicle. ! Type A and D clips s11bi010107 Type A clips Type D clips 1. Turn the clips counterclockwise using a flat-head screwdriver until the center portion of the clip is raised. 2. Remove the clips with a flat-head screwdriver using leverage. 460 Maintenance Tips ! Type B clips s11bi010102 1. Pull out the center portion of the clip using a flat-head screwdriver as shown in the illustration. 2. Pull the protruded center portion to remove the entire body of the clip. ! Type C clips s11bi010103 1. Turn the clip counterclockwise using a Phillips screwdriver until the center portion of the clip is raised. 2. Remove the entire clip by pulling it up. ! Reinstalling clips s11bi0102 Type A clips Type B clips – CONTINUED – Maintenance Tips 461 11 Maintenance and Service Type C clips Type D clips Insert the clip without the center portion first and then push the center portion of the clip into the hole. 11-4. Engine Hood s11ac CAUTION . Be extremely careful not to catch fingers or other objects when closing the engine hood. . Do not push the hood forcibly to close it. It could deform the metal. . Be extremely careful opening the engine hood when the wind is strong. The engine hood could close suddenly, possibly causing injuries from slamming. . Do not install accessories other than genuine SUBARU parts to the engine hood. If the engine hood becomes too heavy, the stay may not be able to support holding it open. . Check that the end of the hood prop is inserted into the slot. If it is not inserted properly, the hood may drop and cause injury. NOTE If the base of the hood prop is jammed, put the hood prop back in position without applying excessive force. Opening the engine hood: 1. If the wiper blades are lifted off the windshield, return them to their original position. 2. Pull the hood release knob under the instrument panel. 462 Engine Hood 3. Release the secondary hood release by moving the lever between the front grille and the hood toward the left. 1 Grip 4. Lift up the hood, release the hood prop from its retainer and put the end of the hood prop into the slot in the hood. Hold the grip for handling the hood prop. Closing the engine hood: 1. Lift the hood slightly and remove the hood prop from the slot in the hood and return the prop to its retainer. 2. Lower the hood to a height of approximately 7.8 to 11.8 in (20 to 30 cm) above its closed position and then let it drop. 3. After closing the hood, be sure the hood is securely locked. If this does not close the hood, release it from a slightly higher position. WARNING Always check that the hood is properly locked before you start driving. If it is not, it might fly open while the vehicle is moving and block your view, which may cause an accident and serious bodily injury. Engine Hood 463 11 Maintenance and Service 11-5. Engine Compartment Overview s11ad 1 Brake fluid reservoir (page 472) 2 Main fuse box (page 490) 3 Battery (page 488) 4 Windshield washer tank (page 483) 5 Radiator cap (page 468) 6 Engine oil filler cap (page 465) 7 Engine coolant reservoir (page 468) 8 Engine oil filter (page 466) 9 Engine oil level gauge (page 465) 10 Coolant pipe cap (page 469) 11 Air cleaner case (page 469) 464 Engine Compartment Overview 11-6. Engine Oil s11ae CAUTION . If the level gauge is not pulled out easily, twist the level gauge right and left, then pull it out. Otherwise, you may be injured accidentally straining yourself. . Use only engine oil with the recommended grade and viscosity. . Be careful not to spill engine oil when adding it. If oil touches the exhaust pipe, it may cause a bad smell, smoke, and/or a fire. If engine oil gets on the exhaust pipe, be sure to wipe it off. & Engine Oil Consumption s11ae07 Some engine oil will be consumed while driving. The rate of consumption can be affected by such factors as transmission type, driving style, terrain and temperature. Under the following conditions, oil consumption can be increased and thus require refilling between maintenance intervals: . When the engine is new and within the break-in period . When the engine oil is of lower quality . When the incorrect oil viscosity is used . When engine braking is employed (repeatedly) . When the engine is operated at high engine speeds (for extended periods of time) . When the engine is operated under heavy loads (for extended periods of time) . When towing a trailer . When the engine idles for extended periods of time . When the vehicle is operated in stop and go and/or heavy traffic situations . When the vehicle is used under severe thermal conditions . When the vehicle accelerates and decelerates frequently Under these or similar conditions, you should check your oil at least every 2nd fuel fill-up and change your engine oil more frequently. Different drivers in the same car may experience different results. If your oil consumption rate is greater than expected, contact your authorized SUBARU dealer who may perform a test under controlled conditions. & Checking the Oil Level s11ae01 1. Park the vehicle on a level surface and stop the engine. If you check the oil level just after stopping the engine, wait for at least 5 minutes for the oil to drain back into the oil pan before checking the level. 1 Oil level gauge 2 Oil filler cap 3 Oil filter CAUTION If the level gauge is not pulled out easily, twist the level gauge right and left, then pull it out. Otherwise, you may be injured accidentally straining yourself. – CONTINUED – Engine Oil 465 11 Maintenance and Service 2. Pull out the level gauge, wipe it clean, and insert it again. 3. Be sure the level gauge is correctly inserted until it stops. 1 Full level 2 Low level 3 Approximately 1.1 US qt (1.0 liters, 0.9 Imp qt) from low level to full level 4. Pull out the oil level gauge again. 5. Check the oil levels on both sides of the level gauge. The engine oil level must be judged by the lowest of the two levels. If the oil level is below the low level mark, add oil so that the full level is reached. CAUTION . Be careful not to touch the engine oil filter when removing the oil filler cap. Doing so may result in a burn, a pinched finger, or may cause some other injury. . Use only engine oil with the recommended grade and viscosity. . Be careful not to spill engine oil when adding it. If oil touches the exhaust pipe, it may cause a bad smell, smoke, and/or a fire. If engine oil gets on the exhaust pipe, be sure to wipe it off. To add engine oil, remove the engine oil filler cap and slowly pour engine oil through the filler neck. After pouring oil into the engine, you must use the level gauge to confirm that the oil level is correct. NOTE . To prevent overfilling the engine oil, do not add any additional oil above the full level when the engine is cold. . After adding or changing the engine oil, warm up the engine and stop it on a level surface, then start the engine after a lapse of 1 minute or more. Confirm that the warning light has turned off after the engine has started. Refer to “Engine Low Oil Level Warning Light” P162. & Changing the Oil and Oil Filter s11ae02 Change the oil and oil filter according to the maintenance schedule in the “Warranty and Maintenance Booklet”. The engine oil and oil filter must be changed more frequently than listed in the maintenance schedule when driving on dusty roads, when short trips are frequently made, or when driving in extremely cold weather. NOTE . Changing the engine oil and oil filter should be performed by a welltrained expert. Contact your SUBARU dealer for changing the engine oil and oil filter. Fully trained mechanics are on standby at a SUBARU dealer to utilize the special tools, spare parts and recommended oil for this work, and also, used oils are properly disposed of. . If performing oil replacement yourself, observe the local regulations and dispose of waste oil properly. 466 Engine Oil & Recommended Grade and Viscosity s11ae03 CAUTION Use only engine oil with the recommended grade and viscosity. Refer to “Engine Oil” P504. NOTE Engine oil viscosity (thickness) affects fuel economy. Oils of lower viscosity provide better fuel economy. However, in hot weather, oil of higher viscosity is required to properly lubricate the engine. & Synthetic Oil s11ae05 You should use synthetic engine oil that meets the same requirements given for conventional engine oil. When using synthetic oil, you must use oil of the same classification, viscosity and grade shown in this Owner’s Manual. Refer to “Engine Oil” P504. Also, you must follow the oil and filter changing intervals shown in the “Warranty and Maintenance Booklet”. NOTE Synthetic oil of the grade and viscosity noted in chapter 12 is the recommended engine oil for optimum engine performance. Conventional oil may be used if synthetic oil is unavailable. 11-7. Cooling System s11af WARNING . Never remove the radiator cap until the engine has been shut off and has cooled down completely. Since the coolant is under pressure, you may suffer serious burns from a spray of boiling hot coolant when the cap is removed. . Be careful of the rotating cooling fan when the engine hood is open. When the engine temperature is high, the cooling fan in the engine compartment may operate when the ignition switch is in the “ON” position, even if the engine is stopped. Touching the cooling fan while it is rotating may result in injury. CAUTION . Vehicles are filled at the factory with SUBARU SUPER COOLANT that does not require the first change for 11 years/137,500 miles (11 years/220,000 km). Do not mix this coolant with any – CONTINUED – Cooling System 467 11 Maintenance and Service other brand or type of coolant during this period. Mixing with a different coolant will reduce the life of the coolant. When necessary to top up the coolant for any reason, use only SUBARU SUPER COOLANT. If SUBARU SUPER COOLANT is diluted with another brand or type, the maintenance interval is shortened to that of the mixing coolant. . Do not splash the engine coolant over painted parts. The alcohol contained in the engine coolant may damage the paint surface. & Cooling Fan, Hose and Connections s11af03 Your vehicle employs an electric cooling fan which is thermostatically controlled to operate when the engine coolant reaches a specific temperature. 1 Normal operating range If the radiator cooling fan does not operate even when the engine coolant temperature gauge exceeds the normal operating range, the cooling fan circuit may be defective. Refer to “Engine Coolant Temperature Gauge” P154. Check the fuse and replace it if necessary. Refer to “Fuses” P490. If the fuse is not blown, have the cooling system checked by your SUBARU dealer. If the frequent addition of coolant is necessary between vehicle service visits, it is recommended that you have your vehicle inspected by an authorized SUBARU dealer to check for leaks, damage, or looseness. & Engine Coolant s11af02 ! Checking the coolant level s11af0201 1 “FULL” level mark 2 “LOW” level mark Check the coolant level at each fuel stop. 1. Check the coolant level on the outside of the reservoir while the engine is cool. 2. If the level is close to or lower than the “LOW” level mark, add coolant up to the “FULL” level mark. If the reserve tank is empty, remove the radiator cap and refill coolant up to just below the filler neck as shown in the following illustration. 468 Cooling System 1 Fill up to this level. 3. After refilling the reserve tank and the radiator, reinstall the cap and check that the rubber gaskets inside the radiator cap are in the proper position. CAUTION . Be careful not to spill engine coolant when adding it. If coolant touches the exhaust pipe, it may cause a bad smell, smoke, and/or a fire. If engine coolant gets on the exhaust pipe, be sure to wipe it off. . Do not splash the engine coolant over painted parts. The alcohol contained in the engine coolant may damage the paint surface. ! Changing the coolant s11af0202 It may be difficult to change the coolant. Have the coolant changed by your SUBARU dealer if necessary. The coolant should be changed according to the maintenance schedule in the “Warranty and Maintenance Booklet”. 11-8. Air Cleaner Element s11ag WARNING Do not operate the engine with the air cleaner element removed. The air cleaner element not only filters intake air but also stops flames if the engine backfires. If the air cleaner element is not installed when the engine backfires, you could be burned. CAUTION When replacing the air cleaner element, use a genuine SUBARU air cleaner element. If it is not used, there is the possibility of causing a negative effect to the engine. The air cleaner element functions as a filter screen. When the air cleaner element is perforated or removed, engine wear will be excessive and engine life shortened. The air cleaner element is a dry type. It is unnecessary to clean or wash the air cleaner element. – CONTINUED – Air Cleaner Element 469 11 Maintenance and Service & Replacing the Air Cleaner Element s11ag01 Replace the air cleaner element according to the maintenance schedule in the “Warranty and Maintenance Booklet”. Under extremely dusty conditions, replace it more frequently. It is recommended that you always use genuine SUBARU parts. 1 Clips 1. Unsnap the two clips holding the air cleaner case (rear). 2. Open the air cleaner case and pull the cover rearward while lifting it up. 3. Remove the air cleaner element. 4. Clean the inside of the air cleaner case (both front and rear) with a damp cloth and install a new air cleaner element. 5. To install the air cleaner case (rear), insert the three projections on the air cleaner case (rear) into the slits on the air cleaner case (front). 6. Install in the reverse order of removal. NOTE Install the air cleaner element so that the surface with “UPR” printed on it faces upward. 470 Air Cleaner Element 11-9. Spark Plugs s11ah It may be difficult to replace the spark plugs. It is recommended that you have the spark plugs replaced by your SUBARU dealer. The spark plugs should be replaced according to the maintenance schedule in the “Warranty and Maintenance Booklet”. & Recommended Spark Plugs s11ah01 Refer to “Electrical System” P507. 11-10. Drive Belt s11ai It is unnecessary to check the deflection of the drive belt periodically because your engine is equipped with an automatic belt tension adjuster. However, replacement of the drive belt should be done according to the maintenance schedule in the “Warranty and Maintenance Booklet”. Consult your SUBARU dealer for replacement. If the drive belt is loose, cracked or worn, contact your SUBARU dealer. 11-11. Continuously Variable Transmission Fluid s11ay There is no fluid level gauge. It is unnecessary to check the continuously variable transmission fluid level. However, if necessary, consult your SUBARU dealer for inspection. Spark Plugs 471 11 Maintenance and Service 11-12. Front Differential Gear Oil and Rear Differential Gear Oil s11bl It is not necessary to check the gear oil level. Check that there are no cracks, damage or leakage. However, the oil inspection should be performed according to the maintenance schedule in the “Warranty and Maintenance Booklet”. Consult your SUBARU dealer for details. & Recommended Grade and Viscosity s11bl01 Each oil manufacturer has its own base oils and additives. Never use different brands together. For details, refer to “Front Differential and Rear Differential Gear Oil” P506. CAUTION Using a differential gear oil other than the specified oil may cause a decline in vehicle performance. 11-13. Brake Fluid s11ao & Checking the Fluid Level s11ao01 WARNING . Never let brake fluid contact your eyes because brake fluid can be harmful to your eyes. If brake fluid gets in your eyes, immediately flush them thoroughly with clean water. For safety, when performing this work, wearing eye protection is advisable. . Brake fluid absorbs moisture from the air. Any absorbed moisture can cause a dangerous loss of braking performance. . If the vehicle requires frequent refilling, there may be a leak. If you suspect a problem, have the vehicle checked at your SUBARU dealer. CAUTION . When adding brake fluid, be careful not to allow any dirt into the reservoir. . Never splash the brake fluid over painted surfaces or rubber parts. Alcohol contained in the brake fluid may damage them. . Be careful not to spill brake fluid when adding it. If brake fluid touches the exhaust pipe, it may cause a bad smell, smoke, and/or a fire. If brake fluid gets on the exhaust pipe, be sure to wipe it off. Visually check the brake fluid level of the reservoir monthly on the even surface. 1 “MAX” level line 2 “MIN” level line Be sure to check the brake fluid level from the outside of the reservoir. If the fluid level is below “MIN”, top up brake fluid to “MAX”. Use only brake fluid from a sealed container. 472 Front Differential Gear Oil and Rear Differential Gear Oil & Recommended Brake Fluid s11ao02 Refer to “Fluids” P506. CAUTION Never use different brands of brake fluid together. Also, avoid mixing DOT 3 and DOT 4 brake fluids even if they are the same brand. 11-14. Brake Pedal s11ar Check the brake pedal free play and reserve distance according to the maintenance schedule in the “Warranty and Maintenance Booklet”. 11-15. Replacement of Brake Pad s11at CAUTION . If you continue to drive despite the scraping noise from the audible brake pad wear indicator, it will result in the need for costly brake rotor repair or replacement. . It is recommended that you disconnect the vehicle battery before replacing the brake pad. However, it is dangerous to disconnect the vehicle battery. Have your SUBARU dealer replace the brake pad. – CONTINUED – Brake Pedal 473 11 Maintenance and Service The disc brakes have audible wear indicators on the brake pads. If the brake pads wear close to their service limit, the wear indicator makes a very audible scraping noise when the brake pedal is applied. If you hear this scraping noise each time you apply the brake pedal, have the brake pads serviced by your SUBARU dealer as soon as possible. & Breaking-In of New Brake Pads s11at01 When replacing the brake pad, use only genuine SUBARU parts. After replacement, the new parts must be broken in. Contact your SUBARU dealer for details. ! Brake pad and lining s11at0101 While maintaining a speed of 30 to 40 mph (50 to 65 km/h), step on the brake pedal lightly. Repeat this five or more times. 11-16. Tires and Wheels s11av & Types of Tires s11av01 You should be familiar with type of tires present on your vehicle. The factory-installed tires on your new vehicle are all season tires. ! All season tires s11av0101 All season tires are designed to provide an adequate measure of traction, handling and braking performance in year-round driving including snowy and icy road conditions. However, all season tires do not offer as much traction performance as winter (snow) tires in heavy or loose snow or on icy roads. All season tires are identified by “ALL SEASON” and/or “M+S” (Mud & Snow) on the tire sidewall. ! Summer tires s11av0102 Summer tires are high-speed capability tires best suited for highway driving under dry conditions. Summer tires are inadequate for driving on slippery roads such as on snow-covered or icy roads. If you drive your vehicle on snow-covered or icy roads, we strongly recommend the use of winter (snow) tires. When installing winter tires, be sure to 474 Tires and Wheels replace all four tires. ! Winter (snow) tires s11av0103 Winter tires are best suited for driving on snow-covered and icy roads. However, winter tires do not perform as well as summer tires and all season tires on roads other than snow-covered and icy roads. & Tire Pressure Monitoring System (TPMS) (U.S.-Spec. Models) s11av02 The tire pressure monitoring system provides the driver with a warning message by sending a signal from a sensor that is installed in each wheel when tire pressure is severely low. The tire pressure monitoring system will activate only when the vehicle is driven. Also, this system may not react immediately to a sudden drop in tire pressure (for example, a blow-out caused by running over a sharp object). If you adjust the tire pressures in a warm garage and will then drive the vehicle in cold outside air, the resulting drop in tire pressures may cause the low tire pressure warning light to illuminate. To avoid this problem when adjusting the tire pressures in a warm garage, inflate the tires to pressures higher than those shown on the tire inflation pressure label. Specifically, inflate them by an extra 1 psi (6.9 kPa, 0.07 kgf/cm2) for every difference of 108F (5.68C) between the temperature in the garage and the temperature outside. By way of example, the following table shows the required tire pressures that correspond to various outside temperatures when the temperature in the garage is 608F (15.68C). Example: Tire size: 225/60R17 99H, 225/55R18 98V Standard tire pressures: Front: 33 psi (230 kPa, 2.3 kgf/cm2) Rear: 32 psi (220 kPa, 2.2 kgf/cm2) Garage temperature: 608F (15.68C) Outside temperature Adjusted pressure [psi (kPa, kgf/cm2)] Front Rear 308F (−18C) 36 (250, 2.5) 35 (240, 2.4) 108F (−128C) 38 (265, 2.65) 37 (255, 2.55) −108F (−238C) 41 (280, 2.8) 39 (270, 2.7) If the low tire pressure warning light illuminates when you drive the vehicle in cold outside air after adjusting the tire pressures in a warm garage, re-adjust the tire pressures using the method described above. Then, increase the vehicle speed to at least 20 mph (32 km/h) and check to see that the low tire pressure warning light goes off a few minutes later. If the low tire pressure warning light does not go off, the tire pressure monitoring system may not be functioning normally. In this event, go to a SUBARU dealer to have the system inspected as soon as possible. While the vehicle is driven, friction between tires and the road surface causes the tires to warm up. After illumination of the low tire pressure warning light, any increase in the tire pressures caused by an increase in the outside air temperature or by an increase in the temperature in the tires can cause the low tire pressure warning light to go off. It may not be possible to install TPMS valves on certain wheels that are on the market. Therefore, if you change the wheels (for example, a switch to snow tires), use wheels that have the same part number as the standard-equipment wheels. Without four operational TPMS valve/sensors on the wheels, the TPMS will not fully function and the warning light in the instrument panel will illuminate steadily after blinking for approximately one minute. WARNING If the low tire pressure warning light does not illuminate briefly after the ignition switch is turned on or the light illuminates steadily after blink- – CONTINUED – Tires and Wheels 475 11 Maintenance and Service ing for approximately one minute, you should have your Tire Pressure Monitoring System checked at a SUBARU dealer as soon as possible. If this light illuminates while driving, never brake suddenly. Instead, perform the following procedure. Otherwise an accident involving serious vehicle damage and serious personal injury could occur. 1) Keep driving straight ahead while gradually reducing speed. 2) Slowly pull off the road to a safe place. 3) Check the pressure for all four tires and adjust the pressure to the COLD tire pressure shown on the tire inflation pressure label on the door pillar on the driver’s side. If this light still illuminates while driving after adjusting the tire pressure, a tire may have significant damage and a fast leak that causes the tire to lose air rapidly. If you have a flat tire, refer to “Flat Tires” P429. When a replacement tire is mounted or a wheel rim is replaced without the original pressure sensor/transmitter being transferred, the low tire pressure warning light will illuminate steadily after blinking for approximately one minute. This indicates the TPMS is unable to monitor all four road wheels. Contact your SUBARU dealer as soon as possible for tire and sensor replacement and/ or system resetting. If the light illuminates steadily after blinking for approximately one minute, promptly contact a SUBARU dealer to have the system inspected. ! TPMS valve self-registration s11av0201 When the wheels are replaced (such as when installing snow tires) or when a new TPMS valve is mounted on a new installed wheel, you will need to perform TPMS valve self-registration. Refer to the following procedure to perform TPMS valve selfregistration. 1. Install the wheels with TPMS valves on the vehicle. 2. Adjust the tire pressure to the specified value. For information about the specified value of the tire pressure, refer to “Tires” P507. 3. Drive at speeds above 25 mph (40 km/h) for at least 4 miles (6 km) or until the low tire pressure warning light turns off. NOTE . When installing TPMS valves, use only genuine SUBARU parts. . Registration of TPMS valves can also be done at a SUBARU dealer. Consult your SUBARU dealer. & Tire Inspection s11av03 Check on a daily basis that the tires are free from serious damage, nails, and stones. At the same time, check the tires for abnormal wear. Contact your SUBARU dealer immediately if you find any problem. NOTE . When the wheels and tires strike curbs or are subjected to harsh treatment as when the vehicle is driven on a rough surface, they can suffer damage that cannot be seen with the naked eye. This type of damage does not become evident until time has passed. Try not to drive over curbs, potholes or on other rough surfaces. If doing so is unavoid- 476 Tires and Wheels able, keep the vehicle’s speed down to a walking pace or less, and approach the curbs as squarely as possible. Also, make sure the tires are not pressed against the curb when you park the vehicle. . If you feel unusual vibration while driving or find it difficult to steer the vehicle in a straight line, one of the tires and/or wheels may be damaged. Drive slowly to the nearest authorized SUBARU dealer and have the vehicle inspected. & Tire Pressures and Wear s11av04 Maintaining the correct tire pressures helps to maximize the tires’ service lives and is essential for good running performance. Check and, if necessary, adjust the pressure of each tire and the spare (if equipped) at least once a month and before any long journey. Tire inflation pressure label Check the tire pressures when the tires are cold. Use a pressure gauge to adjust the tire pressures to the values shown on the tire inflation pressure label. The tire inflation pressure label is located on the door pillar on the driver’s side. Driving even a short distance warms up the tires and increases the tire pressures. Also, the tire pressures are affected by the outside temperature. It is best to check tire pressure outdoors before driving the vehicle. When a tire becomes warm, the air inside it expands, causing the tire pressure to increase. Be careful not to mistakenly release air from a warm tire to reduce its pressure. NOTE . The air pressure in a tire increases by approximately 4.3 psi (30 kPa, 0.3 kgf/cm2) when the tire becomes warm. . The tires are considered cold when the vehicle has been parked for at least 3 hours or has been driven less than 1 mile (1.6 km). WARNING Do not let air out of warm tires to adjust pressure. Doing so will result in low tire pressure. Incorrect tire pressures detract from controllability and ride comfort, and they cause the tires to wear abnormally. – CONTINUED – Tires and Wheels 477 11 Maintenance and Service . Correctly inflated tires (tread worn evenly) Roadholding is good, and steering is responsive. Rolling resistance is low, so fuel consumption is also lower. . Under inflated tires (tread worn at shoulders) Rolling resistance is high, so fuel consumption is also higher. . Over inflated tires (tread worn in center) Ride comfort is poor. Also, the tire magnifies the effects of road surface bumps and dips, possibly resulting in vehicle damage. WARNING Driving at high speeds with excessively low tire pressures can cause the tires to deform severely and to rapidly become hot. A sharp increase in temperature could cause tread separation, and destruction of the tires. The resulting loss of 478 Tires and Wheels vehicle control could lead to an accident. & Wheel Balance s11av05 Each wheel was correctly balanced when your vehicle was new, but the wheels will become unbalanced as the tires become worn during use. Wheel imbalance causes the steering wheel to vibrate slightly at certain vehicle speeds and detracts from the vehicle’s straight-line stability. It can also cause steering and suspension system problems and abnormal tire wear. If you suspect that the wheels are not correctly balanced, have them checked and adjusted by your SUBARU dealer. Also have them adjusted after tire repairs and after tire rotation. CAUTION Loss of correct wheel alignment causes the tires to wear on one side and reduces the vehicle’s running stability. Contact your SUBARU dealer if you notice abnormal tire wear. NOTE The suspension system is designed to hold each wheel at a certain alignment (relative to the other wheels and to the road) for optimum straight-line stability and cornering performance. & Wear Indicators s11av06 1 New tread 2 Worn tread 3 Tread wear indicator Each tire incorporates a tread wear indicator, which becomes visible when the depth of the tread grooves decreases to 0.063 in (1.6 mm). A tire must be replaced when the tread wear indicator appears as a solid band across the tread. WARNING When a tire’s tread wear indicator becomes visible, the tire – CONTINUED – Tires and Wheels 479 11 Maintenance and Service is worn beyond the acceptable limit and must be replaced immediately. With a tire in this condition, driving at high speeds in wet weather can cause the vehicle to hydroplane. The resulting loss of vehicle control can lead to an accident. NOTE For safety, inspect the tire tread regularly and replace the tires before their tread wear indicators become visible. & Rotational Direction of Tires s11av11 Example of rotational direction marked on the sidewall 1 Front If the tires have specific rotational direction, refer to the arrow marked on the side wall. The arrow should be pointing forward direction when the wheels are fitted. & Tire Rotation s11av07 Vehicles equipped with 4 nonunidirectional tires 1 Front 480 Tires and Wheels Vehicles equipped with unidirectional tires 1 Front Tire wear varies from wheel to wheel. Move the tires to the positions shown in the illustration each time they are rotated. For the tire rotation schedule, refer to the “Warranty and Maintenance Booklet”. Replace any damaged or unevenly worn tire at the time of rotation. After tire rotation, adjust the tire pressures and make sure the wheel nuts are correctly tightened. After driving approximately 600 miles (1,000 km), check the wheel nuts again and retighten any nut that has become loose. & Tire Replacement s11av08 The wheels and tires are important and integral parts of your vehicle’s design; they cannot be changed arbitrarily. The tires fitted as standard equipment are optimally matched to the characteristics of the vehicle and were selected to give the best possible combination of running performance, ride comfort, and service life. It is essential for every tire to have a size and construction matching those shown on the tire inflation pressure label. For more details about tire inflation pressure, refer to “Tires” P507. Using tires of a non-specified size detracts from controllability, ride comfort, braking performance, speedometer accuracy and odometer accuracy. It also creates incorrect body-to-tire clearances and inappropriately changes the vehicle’s ground clearance. All four tires must be the same in terms of manufacturer, brand (tread pattern), construction, and size. You are advised to replace the tires with new ones that are identical to those fitted as standard equipment. For safe vehicle operation, SUBARU recommends replacing all four tires at the same time. WARNING . When replacing or installing tire(s), all four tires must be the same for the following items. (a) Size (b) Speed symbol (c) Load index (d) Circumference (e) Construction (f) Manufacturer (g) Brand (tread pattern) (h) Degrees of wear For items (a) to (c), you must obey the specification that is printed on the tire inflation pressure label. The tire inflation pressure label is located on the driver’s door pillar. If all four tires are not the same in items (a) to (h), serious mechanical damage could be caused to the drivetrain of the car, and – CONTINUED – Tires and Wheels 481 11 Maintenance and Service affect the followings. – Ride – Handling – Braking – Speedometer/Odometer calibration – Clearance between the body and the tires It also may be dangerous and lead to loss of vehicle control, and it can lead to an accident. . Use only radial tires. Do not use radial tires together with belted bias tires and/or bias-ply tires. Doing so can dangerously reduce controllability, resulting in an accident. & Wheel Replacement s11av09 When replacing wheels due, for example, to damage, make sure the replacement wheels match the specifications of the wheels that are fitted as standard equipment. Replacement wheels are available from SUBARU dealers. WARNING Use only those wheels that are specified for your vehicle. Wheels not meeting specifications could interfere with brake caliper operation and may cause the tires to rub against the wheel well housing during turns. The resulting loss of vehicle control could lead to an accident. NOTE When any of the wheels are removed and replaced for tire rotation or to change a flat tire, always check the tightness of the wheel nuts after driving approximately 600 miles (1,000 km). If any nut is loose, tighten it to the specified torque. 11-17. Alloy Wheels s11bm Alloy wheels can be scratched and damaged easily. Handle them carefully to maintain their appearance, performance, and safety. . When any of the wheels is removed and replaced for tire rotation or to change a flat, always check the tightness of the wheel nuts after driving approximately 600 miles (1,000 km). If any nut is loose, tighten it to the specified torque. . Never apply oil to the threaded parts, wheel nuts, or tapered surface of the wheel. . Never let the wheel rub against sharp protrusions or curbs. . When wheel nuts, balance weights, or the center cap is replaced, be sure to replace them with genuine SUBARU parts designed for alloy wheels. . When stacking and storing removed tires, place shock-absorbing material between the tires to protect the wheels from becoming scratched. 482 Alloy Wheels 11-18. Windshield Washer Fluid s11ax Windshield washer fluid warning light When there is only a small amount of washer fluid remaining, the windshield washer fluid warning light will appear. When this occurs, refill the washer fluid as follows. 1 “FULL” mark Remove the washer tank filler cap, then add fluid until it reaches the “FULL” mark on the tank. Use windshield washer fluid. If windshield washer fluid is unavailable use clean water. In areas where water freezes in winter, use an anti-freeze type windshield washer fluid. CAUTION Never use engine coolant as washer fluid because it could cause paint damage. If you fill the windshield washer tank with a fluid with a different concentration from the one used previously, purge the old fluid from the piping between the windshield washer tank and washer nozzles by operating the washer for a certain period of time. Otherwise, if the concentration of the fluid remaining in the piping is too low for the outside temperature, it may freeze and block the nozzles. CAUTION . Adjust the washer fluid concentration appropriately for the outside temperature. If the concentration is inappropriate, sprayed washer fluid may freeze on the windshield and obstruct your view, and the fluid may freeze in the windshield washer tank. – CONTINUED – Windshield Washer Fluid 483 11 Maintenance and Service . Be careful foreign matter does not contaminate the washer fluid when filling the tank. Contamination could cause malfunctions, such as clogging the pump. . State or local regulations on volatile organic compounds may restrict the use of methanol, a common windshield washer antifreeze additive. Washer fluids containing non-methanol antifreeze agents should be used only if they provide cold weather protection without damaging your vehicle’s paint, wiper blades or washer system. 11-19. Replacement of Wiper Blades s11az Grease, wax, insects, or other material on the windshield or the wiper blade results in jerky wiper operation and streaking on the glass. If you cannot remove the streaks after operating the windshield washer or if the wiper operation is jerky, clean the outer surface of the windshield and rear window using a sponge or soft cloth with a neutral detergent or mild-abrasive cleaner. Do not, however, use detergent to clean the blade rubbers. Use only a sponge or soft cloth (and no neutral detergent or mild abrasive cleaner) when you clean the blade rubbers. If you wipe the rubber of the blade strongly, the black coating component will peel off, which will cause the wiper to judder. Also, after wiping it off, check that the rubber has not come loose. After cleaning the window glass and wiper blade rubbers, be sure to rinse them with clean water. Rinse the window until the water does not form beads on the glass. This indicates that the glass is clean. CAUTION . Do not clean the wiper blades with gasoline or a solvent, such as paint thinner or benzine. This will cause deterioration of the wiper blades. . When you wish to raise the passenger- side wiper arm, first raise the driver-side wiper arm. Otherwise, the passenger-side wiper assembly and driver-side wiper assembly will touch each other, possibly resulting in scratches. . Return the passenger-side wiper arm to its original position before returning the driver-side wiper arm to its original position. Otherwise, the passenger-side wiper assembly and driver-side wiper assembly will touch each other, possibly resulting in scratches. . When returning the raised wipers to the original positions, return the wipers slowly on the windshield by hand. Returning the wipers from the detached positions by the spring operation might change the shape of the wiper arm or scratch the windshield. . While removing the wiper blades from the wiper arms, do not return the wiper arms to the original positions. Otherwise, the windshield surface may be 484 Replacement of Wiper Blades scratched. If you cannot eliminate the streaking even after following this method, replace the wiper blades using the following procedures. & Windshield Wiper Blade Assembly s11az01 NOTE Do not lower the wiper arm while the wiper blade assembly is removed. 1. Raise the wiper arm off the windshield. First raise the driver’s side wiper arm and then raise the front passenger’s side wiper arm. CAUTION Hold the wiper arm when replacing the wiper blade. Holding the wiper blade, may result in blade deformation. 1 Lock knob 2. Hold the wiper blade connection by hand, push the lock knob to release the lock, and then pull out the wiper blade assembly. NOTE Do not use a hard object to push the lock knob. The lock knob may be scratched. 3. When installing the wiper blade assembly, align it with the wiper arm connection part and then slide it in the opposite direction of removal to install. After installing the wiper blade assembly, check that the connection part is locked completely. 4. Hold the wiper arm by hand and slowly lower it in position. – CONTINUED – Replacement of Wiper Blades 485 11 Maintenance and Service & Window Wiper Blade Rubber s11az05 Replace the wiper blade rubber according to the following procedure. 1 Slit 1. Pull the wiper blade rubber from the right side in the order of (1), (2) and (3) until the slit on the wiper blade can be seen position. 2. Pull the end of the wiper blade rubber through the slit to remove it. 3. Insert a new wiper blade rubber into the slit. Do not insert the wiper blade rubber into the wrong slit. 486 Replacement of Wiper Blades & Rear Window Wiper Blade Assembly s11az03 1. Raise the wiper arm off the rear window. 2. Turn the wiper blade assembly counterclockwise. 3. Pull the wiper blade assembly toward you to remove it from the wiper arm. & Rear Window Wiper Blade Rubber s11az04 1. Pull out the end of the blade rubber assembly to unlock it from the plastic support. 2. Pull the blade rubber assembly out of the plastic support. 1 Metal spines – CONTINUED – Replacement of Wiper Blades 487 11 Maintenance and Service 3. If the new blade rubber is not provided with two metal spines, remove the metal spines from the old blade rubber and install them in the new blade rubber. 4. Align the claws of the plastic support with the grooves in the blade rubber assembly, then slide the blade rubber assembly into place. Securely retain both ends of the rubber with the stoppers on the plastic support ends. If the rubber is not retained properly, the wiper may scratch the rear window glass. 5. Install the wiper blade assembly to the wiper arm. Make sure that it locks in place. 6. Hold the wiper arm by hand and slowly lower it in position. 11-20. Battery s11ba WARNING . Before beginning work on or near any battery, be sure to extinguish all cigarettes, matches, and lighters. Never expose a battery to an open flame or electric sparks. Batteries give off a gas which is highly flammable and explosive. . For safety, in case an explosion does occur, wear eye protection or shield your eyes when working near any battery. Never lean over a battery. . Do not let battery fluid contact eyes, skin, fabrics, or paint because battery fluid is a corrosive acid. If battery fluid gets on your skin or in your eyes, immediately flush the area with water thoroughly. Seek medical help immediately if acid has entered the eyes. If battery fluid is accidentally swallowed, immediately drink a large amount of milk or water, and seek medical attention immediately. 488 Battery . To lessen the risk of sparks, remove rings, metal watchbands, and other metal jewelry. Never allow metal tools to contact the positive battery terminal and anything connected to it WHILE you are at the same time in contact with any other metallic portion of the vehicle because a short circuit will result. . Keep everyone including children away from the battery. . Charge the battery in a wellventilated area. . Battery posts, terminals, and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and reproductive harm. Batteries also contain other chemicals known to the State of California to cause cancer. Wash hands after handling. Q-85 Battery (Type-B) 1 Cap 2 Upper level 3 Lower level It is unnecessary to periodically check the battery fluid level or periodically refill with distilled water. However, if the battery fluid level is below the lower level, remove the cap. Fill to the upper level with distilled water. Refer to “Electrical System” P507. For “SUBARU STARLINK Safety and Security” without navigation system: When the vehicle battery is discharged or replaced, certain internal settings can be restored only by pairing the vehicle to a smartphone via Bluetooth, or by visiting a SUBARU dealer. Until those internal settings are restored, certain convenience features, including the “Service Appointment Scheduler,” may be unavailable. CAUTION Never use more than 10 amperes when charging the battery because it will shorten battery life. NOTE To avoid battery drain, do not use electric power (e.g., lights, wipers, climate control, seat heaters, etc.) for longer than necessary when the engine is off. If using the radio, room lights or other electrical equipment with the engine off, even in the ignition switch is in the “ACC” position, the battery will drain. Battery 489 11 Maintenance and Service 11-21. Fuses s11bb CAUTION Never replace a fuse with one having a higher rating or with material other than a fuse because serious damage or a fire could result. NOTE Fuse rating and used circuit are described on behind each fuse box cover. The fuses are designed to melt during an overload to prevent damage to the wiring harness and electrical equipment. The fuses are located in two fuse boxes. One is located under the instrument panel behind the fuse box cover on the driver’s seat side. To remove the cover, pull it out. 1 Spare fuses 2 Fuse puller The other one (main fuse box) is housed in the engine compartment. Also, the spare fuses and fuse puller are stored in the fuse box cover. Pinch the upper part of the fuse puller when removing it from the main fuse box. 1 Good 2 Blown If any lights, accessories or other electrical controls do not operate, inspect the corresponding fuse. If a fuse has blown, replace it. 1. Turn the ignition switch to the “LOCK”/ “OFF” position and turn off all electrical accessories. 2. Remove the fuse box cover. 3. Determine which fuse may be blown. Look at the back side of each fuse box cover. 490 Fuses 4. Pull out the fuse with the fuse puller. 5. Inspect the fuse. If it has blown, replace it with a spare fuse of the same rating. 6. If the same fuse blows again, this indicates that its system has a problem. Contact your SUBARU dealer for repairs. 11-22. Installation of Accessories s11bd Always consult your SUBARU dealer before installing fog lights or any other electrical equipment in your vehicle. Such accessories may cause the electronic system to malfunction if they are incorrectly installed or if they are not suited for the vehicle. We recommend that you install only genuine SUBARU accessories on your vehicle. 11-23. Replacing Bulbs s11be WARNING Bulbs may become very hot while illuminated. Before replacing bulbs, turn off the lights and wait until the bulbs cool down, Otherwise, there is the risk of sustaining a burn injury. CAUTION Replace any bulb only with a new bulb of the specified wattage. Using a bulb of different wattage could result in a fire. For the specified wattage of each bulb, refer to “Bulb Chart” P509. For replacement, contact your SUBARU dealer. Do not touch the glass portion of the light bulb with bare hands. When holding the glass portion is unavoidable, hold it with a clean dry cloth to avoid getting moisture and grease on the bulb. If there are any fingerprints or grease on the bulb surface, wipe them away with a soft cloth moistened with alcohol. Also, if the bulb is scratched or dropped, it may blow out or crack. – CONTINUED – Installation of Accessories 491 11 Maintenance and Service & Headlights s11be18 LED headlight warning light The LED headlight warning light illuminates if the LED headlights malfunction. We recommend that you have your vehicle inspected at a SUBARU dealer as soon as possible. & Front Turn Signal Light, Position Light and Front Side Marker Light (If Equipped) s11be03 It may be difficult to replace the bulbs. We recommend that you have the bulbs replaced by your SUBARU dealer if necessary. & Rear Combination Lights s11be05 1. Use a screwdriver to remove the secured clips of the covers. 2. Remove the side cover. 3. Remove the upper and lower screws. 4. Slide the rear combination light assembly rearward to remove it from the vehicle. 492 Replacing Bulbs 5. Disconnect the electrical connector. 1 Rear turn signal light 6. Remove the bulb holder from the rear combination light assembly by turning it counterclockwise. 7. Pull the bulb out of the bulb holder and replace it with a new one. 8. Set the bulb holder into the rear combination light assembly and turn it clockwise until it locks. 9. Reconnect the electrical connector. 10. Reinstall the rear combination light assembly by sliding the two-pronged part of the combination light assembly securely to each holder of the vehicle side. 11. Tighten the upper and lower screws. 12. Reinstall the side cover. & Back-Up Light s11be50 NOTE It may be difficult to replace the bulbs. We recommend that you have the bulbs replaced by your SUBARU dealer if necessary. – CONTINUED – Replacing Bulbs 493 11 Maintenance and Service 1. Cover the tip of a flat-head screwdriver with vinyl tape or cloth so that it will not scratch. Apply a flat-head screwdriver to the light cover as shown in the illustration, and pry the light cover off from the rear gate trim. 2. Turn the bulb socket counterclockwise and remove it. 3. Pull the bulb out of the bulb socket and replace it with a new one. 4. Install the bulb socket by turning it clockwise. 5. Install the light cover on the rear gate. & License Plate Light s11be07 1. License plate light must be pushed outwards, then pulled out to be removed. 494 Replacing Bulbs 2. Turn the bulb socket counterclockwise and pull out the socket. 3. Pull the bulb out of the socket. 4. Install a new bulb. 5. Reinstall the bulb socket and the license plate light cover. & Other Bulbs s11be29 It may be difficult to replace the bulbs. We recommend that you have the bulbs replaced by your SUBARU dealer if necessary. & Adjusting Headlight Aim s11be57 1 Adjustment screw A 2 Adjustment screw B ! Before checking the headlight aiming s11be5701 1. Make sure the vehicle has a full tank of gasoline and the area around the headlight is not deformed. 2. Park the vehicle on level ground. 3. Sit in the driver’s seat. 4. Bounce the vehicle several times. ! Headlight aim adjustment s11be5702 1 Adjustment direction mark 1. Turn the screw A clockwise or counterclockwise to adjust it. Remember the direction of the rotation and number of rotations. – CONTINUED – Replacing Bulbs 495 11 Maintenance and Service 1 Adjustment direction mark 2. Turn screw B the same number of turns and in the same direction as step 2. NOTE . If the headlight aim cannot be adjusted, contact your SUBARU dealer. . To inspect of the headlight aim position, consult a SUBARU dealer. 11-24. Replacing Battery s11bk The access key fob/transmitter battery may be discharged under the following conditions. . The operation of the keyless access function is unstable. . The operating distance of the remote keyless entry system is unstable. . The transmitter does not operate properly when used within the standard distance. Replace the battery with a new one. CAUTION . Do not let dust, oil or water get on or in the access key fob/transmitter when replacing battery. . Be careful not to damage the printed circuit board in the access key fob/transmitter when replacing the battery. . Be careful not to allow children to touch the battery and any removed parts; children could swallow them. . There is a danger of an explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type of the battery. . Batteries shall not be exposed to excessive heat such as bright sunlight, fire or the like. NOTE . Replace only with the same or equivalent type of battery recommended by the manufacturer. . Dispose of used batteries according to the local laws. . Mount the battery in the correct orientation to prevent fluid leakage. Be careful not to bend the terminals. It may result in a malfunction. . It is recommended that the battery should be replaced by a SUBARU dealer. . Use a new battery. . After replacing the battery, confirm that the access key fob/transmitter functions properly. 496 Replacing Battery & Replacing Battery of Access Key Fob s11bk01 CAUTION . When removing or fitting the access key fob cover, make sure that the plastic part does not come off or become misaligned. . Before replacing the battery, remove any static electricity. Battery: Button battery CR2032 or equivalent 1 Release button 2 Emergency key 1. Take out the emergency key. 2. Wrap a flat-head screwdriver with vinyl tape or a cloth, and insert it in the gap to remove the cover. 3. Take out the battery using a flat-head screwdriver with vinyl tape or a cloth. 4. Insert a new battery with its positive (+) side facing upward as shown in the figure. 5. Attach the cover to the access key fob by fitting the projections and recesses together. – CONTINUED – Replacing Battery 497 11 Maintenance and Service & Replacing Battery of Transmitter s11bk02 CAUTION Before replacing the battery, remove any static electricity. Battery: Button battery CR2025 or equivalent 1. Open the key head using a flat-head screwdriver. 2. Remove the transmitter case from the key head. 3. Open the transmitter case by releasing the hooks. 1 Negative (−) side facing up 4. Replace the old battery with a new battery (type CR2025 or equivalent) making sure to install the new battery with the negative (−) side facing up. 5. Put together the transmitter case by fitting the hooks on the case. 6. Reinstall the transmitter case in the key head. 7. Refit the removed half of the key head. After the battery is replaced, the transmitter must be synchronized with the remote keyless entry system’s control unit. Press either the “ ” or “ ” button six times to synchronize the unit. 498 Replacing Battery s12 12-1. Specifications . 502 Dimensions 502 Engine 503 Fuel 503 Engine Oil 504 Front Differential and Rear Differential Gear Oil. 506 Fluids . 506 Engine Coolant. 507 Electrical System 507 Tires. 507 Temporary Spare Tires 508 Brake Disc 508 12-2. Bulb Chart509 Safety Precautions . 509 Bulb Chart . 510 12-3. Vehicle Identification.512 12-4. Function Settings 513 Function Settings and Adjustments on the Center Information Display . 513 Individual Settings and Adjustments Excluding Center Information Display . 513 Function Settings and Adjustments Performed by a Dealer 513 Specifications 12 Specifications 12-1. Specifications s12aa These specifications are subject to change without notice. & Dimensions s12aa01 in (mm) Item Overall length 176.4 (4,480) Overall width 70.9 (1,800) Overall height 63.0 (1,600)*1 62.8 (1,595)*2 Wheel base 105.1 (2,670) Tread Front 61.2 (1,555) Rear 61.2 (1,555) Ground clearance*3 8.7 (220) *1: Models with roof rails *2: Models without roof rails *3: Measured with vehicle empty 502 Specifications & Engine s12aa02 Engine model FB20 (2.0 L, DOHC, non-turbo) FB25 (2.5 L, DOHC, non-turbo) Engine type Horizontally opposed, liquid cooled 4 cylinder, 4 stroke direct injection gasoline engine Horizontally opposed, liquid cooled 4 cylinder, 4-stroke direct injection gasoline engine Displacement cu-in (cc) 122 (1,995) 152 (2,498) Bore 6 Stroke in (mm) 3.31 6 3.54 (84.0 6 90.0) 3.70 6 3.54 (94.0 6 90.0) Compression ratio 12.5 : 1 12.0 : 1 Firing order 1 – 3 – 2 – 4 1 – 3 – 2 – 4 & Fuel s12aa08 Fuel requirement Fuel tank capacity Unleaded gasoline with 87 AKI (90 RON) or higher 16.6 US gal (63 liters, 13.9 Imp gal) For more details, refer to “Fuel” P307. – CONTINUED – Specifications 503 12 Specifications & Engine Oil s12aa12 For the checking, adding and replacing procedure or other details, refer to “Engine Oil” P465. NOTE Have the procedure for changing the engine oil and oil filter performed by a properly-trained expert. It is recommended that you have this service performed by your SUBARU dealer. ! Approved engine oil s12aa1201 Always use the SUBARU approved engine oil. For further details, please contact your SUBARU dealer. If the approved engine oil is unavailable, use the alternative engine oil described on the next page. ! Alternative engine oil s12aa1202 If the SUBARU approved oil is unavailable, the following alternative oil can be used. NOTE . Each quantity indicated here is only a guideline. The necessary quantity for replacement may differ slightly depending on the temperature and other factors. . In choosing an oil, you want the proper quality and viscosity, as well as one that will enhance fuel economy. Oils of lower viscosity provide better fuel economy. However, in hot weather, oil of higher viscosity is required to properly lubricate the engine. The following table lists the recommended viscosities and applicable temperatures. . When adding oil, you may use different brands together as long as they are the same ILSAC and API classification and SAE viscosity as those recommended by SUBARU. 504 Specifications Oil grade SAE viscosity No. and applicable temperature Engine oil capacity ILSAC (International Lubricant Specification Advisory Committee) GF-6B, which can be identified with the ILSAC certification mark (Shield mark) 0W-16 synthetic oil is the required oil for optimum engine performance and protection. Conventional oil may be used if synthetic oil is unavailable. *: If 0W-16 synthetic oil is not available, 0W-20 conventional oil may be used if replenishment is needed but should be changed to 0W-16 synthetic oil at the next oil change. · Adding the oil from L to F level: 1.1 US qt (1.0 liters, 0.9 Imp qt) · Changing the oil and oil filter: 4.7 US qt (4.4 liters, 3.9 Imp qt) · Changing the oil: 4.4 US qt (4.2 liters, 3.7 Imp qt) ILSAC (International Lubricant Specification Advisory Committee) GF-6A, which can be identified with the ILSAC certification mark (Starburst mark) API (American Petroleum Institute) classification SP with the words “RESOURCE CONSERVING” – CONTINUED – Specifications 505 12 Specifications & Front Differential and Rear Differential Gear Oil s12aa13 Oil Front differential gear oil Rear differential gear oil Oil grade . SUBARU Extra MT*3 . API classification GL-5 (75W-90) API classification GL-5 (75W-90) Oil capacity*1 1.4 US qt (1.3 liters, 1.1 Imp qt) 0.8 US qt (0.8 liters, 0.7 Imp qt) Remarks*2 “Front Differential Gear Oil and Rear Differential Gear Oil” P472 *1: The indicated oil quantity is only a guideline. The necessary quantity for replacement may differ slightly depending on the temperature and other factors. Check the oil level after refilling the gearbox with oil. *2: For more details about maintenance and service, refer to the indicated section. *3: The vehicle is filled at the factory with this oil. & Fluids s12aa10 Fluid Fluid type*1 Fluid capacity*2 Remarks*3 Continuously variable transmission fluid Consult your SUBARU dealer. 2.0 L engine models: 10.8 US qt (10.2 liters, 9.0 Imp qt) 2.5 L engine models: 11.9 US qt (11.3 liters, 9.9 lmp qt) “Continuously Variable Transmission Fluid” P471 Brake fluid FMVSS No. 116, DOT 3 or DOT 4 brake fluid “Brake Fluid” P472 *1: Use one of the indicated types of fluid. *2: The indicated fluid quantity is only a guideline. The necessary quantity for replacement may differ slightly depending on the temperature and other factors. *3: For more details about maintenance and service, refer to the indicated section. 506 Specifications & Engine Coolant s12aa11 Coolant capacity Coolant type 2.0 L engine models 8.4 US qt (7.9 liters, 7.0 Imp qt) SUBARU SUPER COOLANT 2.5 L engine models 8.9 US qt (8.4 liters, 7.4 Imp qt) The indicated coolant quantity is only a guideline. The necessary quantity for replacement may differ slightly depending on the temperature and other factors. For more details about maintenance and service, refer to “Cooling System” P467. & Electrical System s12aa03 Battery type Type-A LN2 Type-B Q-85 Alternator 2.0 L engine models 12 V 130 A 2.5 L engine models 12 V 150 A Spark plugs 2.0 L engine models DILKAR7Q8(NGK) 2.5 L engine models & Tires s12aa05 Tire size 225/60R17 99H 225/55R18 98V Wheel size 17 6 7 J 18 6 7 J Pressure Front 33 psi (230 kPa, 2.3 kgf/cm2) Rear 32 psi (220 kPa, 2.2 kgf/cm2) Wheel nut tightening torque 89 lbf·ft (120 N·m, 12 kgf·m)*1 *1: This torque is equivalent to applying approximately 88 to 110 lbf (40 to 50 kgf) at the end of the wheel nut wrench. If you have tightened the wheel nuts by yourself, have the tightening torque checked at the nearest automotive service facility as soon as possible. For the wheel nut tightening procedure, refer to “Changing a Flat Tire” P429. – CONTINUED – Specifications 507 12 Specifications & Temporary Spare Tires s12aa15 Temporary spare tire size T145/80 D17 Temporary spare tire inflation pressure (recommended cold tire inflation pressure) 60 psi (420 kPa, 4.2 kgf/cm2) & Brake Disc s12aa18 If you need information on the usage limit value of brake discs and the method for measuring them, consult your SUBARU dealer. 508 Specifications 12-2. Bulb Chart s12ac & Safety Precautions s12ac03 WARNING Bulbs may become very hot while illuminated. Before replacing bulbs, turn off the lights and wait until the bulbs cool down. Otherwise, there is a risk of sustaining a burn injury. CAUTION Replace any bulb only with a new bulb of the specified wattage. Using a bulb of different wattage could result in a fire. – CONTINUED – Bulb Chart 509 12 Specifications & Bulb Chart s12ac04 NOTE Lights indicated by letters are the LED (Light Emitting Diode) type. Consult your SUBARU dealer for replacement. 510 Bulb Chart Wattage Bulb No. 1 Vanity mirror lights 12 V-2 W 2 Map lights 12 V-8 W 3 Dome light 12 V-8 W 4 Front position lights (if equipped) 12 V-28 W/8 W 7444NA Front turn signal lights (if equipped) 12 V-28 W/8 W 7444NA 5 Backup light 12 V-16 W W16W 6 Cargo area light 12 V-5 W W5W 7 License plate lights 12 V-5 W W5W 8 Rear turn signal lights 12 V-21 W WY21W 9 Front side marker light (if equipped) 12 V-5 W W5W A Low and high beam headlights Daytime running light B Front fog lights (if equipped) C Front turn signal lights (if equipped) D Front position lights (if equipped) E Front side marker light (if equipped) Accessory lamp (if equipped) F Side turn signal lights G High-mounted stop light H Stop lights I Tail lights Rear side marker lights Bulb Chart 511 12 Specifications 12-3. Vehicle Identification s12ad 1 Vehicle identification number (if equipped) (under the floor carpet of the right-hand front seat) 2 Emission control label 3 Tire inflation pressure label (vehicle placard) 4 Certification label 5 Vehicle identification number 6 Model number label 7 Fuel label 8 Air conditioner label 512 Vehicle Identification 12-4. Function Settings s12ag & Function Settings and Adjustments on the Center Information Display s12ag01 Setting adjustments can be manually changed within the center information display to meet your personal requirements. Refer to “Center Information Display (CID)” P188. & Individual Settings and Adjustments Excluding Center Information Display s12ag02 For setting adjustments to the following items, refer to the appropriate page for details. Item Function Available settings Factory default setting Page Alarm system Alarm system Operation/Non-operation Operation 135 Remote keyless entry system Audible signal Operation/Non-operation Operation 126 & Function Settings and Adjustments Performed by a Dealer s12ag03 Item Function Available settings Factory default setting Alarm system Monitoring start delay time (after closing doors) 0 seconds/30 seconds 30 seconds Map lights/Dome light/Cargo area light illumination ON/OFF OFF Keyless access with push-button Audible signal volume* Level 1 to 7 Level 6 Remote keyless entry system Audible signal volume* Level 1 to 7 Level 6 Key lock-in prevention Key lock-in prevention Operation/Non-operation Operation Auto dimmer cancel Sensitivity of the operation of the auto dimmer cancel OFF/Min/Low/Mid/Hi/ Max Mid High beam assist function High beam assist function Operation/Non-operation Operation Reverse gear interlocked rear wiper Reverse gear interlocked rear wiper operation Operation/Non-operation U.S.-spec. models: Non-operation Other models: Operation *: The audible signal volume cannot be set under level 5 for the warning chime. Function Settings 513 12 Specifications s13 13-1. For U.S.A. 516 13-2. Tire Information 516 Tire Labeling 516 Recommended Tire Inflation Pressure. 518 Glossary of Tire Terminology 519 Tire Care – Maintenance and Safety Practices . 524 Vehicle Load Limit – How to Determine . 524 Determining Compatibility of Tire and Vehicle Load Capacities 527 Adverse Safety Consequences of Overloading on Handling and Stopping and on Tires 528 Steps for Determining Correct Load Limit. 528 13-3. Uniform Tire Quality Grading Standards.529 TREADWEAR . 529 TRACTION AA, A, B, C . 529 TEMPERATURE A, B, C 529 13-4. Reporting Safety Defects (USA).530 13-5. How to Contact Transport Canada in Order to Report a Safety Concern Relating to the Vehicle (Canada) .531 Consumer Information and Reporting Safety Defects 13 Consumer Information and Reporting Safety Defects 13-1. For U.S.A. s13aa The following information has been compiled according to Code of Federal Regulations “Title 49, Part 575”. 13-2. Tire Information s13ab & Tire Labeling s13ab01 Many markings (e.g. Tire size, Tire Identification Number or TIN) are placed on the sidewall of a tire by tire manufacturers. These marking can provide you with useful information on the tire. ! Tire size s13ab0101 Your vehicle comes equipped with P-Metric tire size. It is important to understand the sizing system in selecting the proper tire for your vehicles. Here is a brief review of the tire sizing system with a breakdown of its individual elements. ! P Metric s13ab010101 With the P-Metric system, Section Width is measured in millimeters. To convert millimeters into inches, divide by 25.4. The Aspect Ratio (Section Height divided by Section Width) helps provide more dimensional information about the tire size. Example: (1) P = Certain tire type used on light duty vehicles such as passenger cars (2) Section Width in millimeters (3) Aspect Ratio (= section height 7 section width). (4) R = Radial Construction (5) Rim diameter in inches ! Load and Speed Rating Descriptions s13ab010102 The load and speed rating descriptions will appear following the size designation. They provide two important facts about the tire. First, the number designation is its load index. Second, the letter designation indicates the tire’s speed rating. 516 For U.S.A. Example: (6) Load Index: A numerical code which specifies the maximum load a tire can carry at the speed indicated by its speed symbol, at maximum inflation pressure. For example, “91” means 1,356 lbs (615 kg), “90” means 1,323 lbs (600 kg), “89” means 1,279 lbs (580 kg) WARNING Load indices apply only to the tire, not to the vehicle. Putting a load rated tire on any vehicle does not mean the vehicle can be loaded up to the tire’s rated load. (7) Speed Rating: An alphabetical system describing a tire’s capability to travel at established and predetermined speeds. For example, “V” means 149 mph (240 km/h) WARNING . Speed ratings apply only to the tire, not to the vehicle. Putting a speed rated tire on any vehicle does not mean the vehicle can be operated at the tire’s rated speed. . The speed rating is void if the tires are worn out, damaged, repaired, retreaded, or otherwise altered from their original condition. If tires are repaired, retreaded, or otherwise altered, they may not be suitable for original equipment tire designed loads and speeds. ! Tire Identification Number (TIN) s13ab0102 Tire Identification Number (TIN) is marked on the intended outboard sidewall. Here is a brief review of the TIN with a breakdown of its individual elements. Type A (1) DOT symbol* (2) Manufacturer’s Identification Mark (3) Tire Size Code (4) Tire Type Code (5) Date of Manufacture The first two figures identify the week, starting with “01” to represent the first full week of the calendar year; the second two figures represent the year. For example, 0101 means the 1st week of 2001. *: The DOT symbol certifies that the tire conforms to applicable Federal Motor Vehicle Safety Standards. – CONTINUED – Tire Information 517 13 Consumer Information and Reporting Safety Defects Type B (1) DOT symbol* (2) Plant Code (3) Manufacturer’s Code (4) Date of Manufacture The first two figures identify the week, starting with “01” to represent the first full week of the calendar year; the second two figures represent the year. For example, 0101 means the 1st week of 2001. *: The DOT symbol certifies that the tire conforms to applicable Federal Motor Vehicle Safety Standards. ! Other markings s13ab0103 The following makings are also placed on the sidewall. ! Maximum permissible inflation pressure s13ab010301 The maximum cold inflation pressure to which this tire may be inflated. For example, “350 kPa (51 PSI) MAX. PRESS” ! Maximum load rating s13ab010302 The load rating at the maximum permissible weight load for this tire. For example, “MAX. LOAD 615 kg (1,356 LBS) @ 350 kPa (51 PSI) MAX. PRESS.” WARNING Maximum load rating applies only to the tire, not to the vehicle. Putting a load rated tire on any vehicle does not mean the vehicle can be loaded up to the tire’s rated load. ! Construction type s13ab010303 Applicable construction of this tire. For example, “TUBELESS STEEL BELTED RADIAL” ! Construction s13ab010304 The generic name of each cord material used in the plies (both sidewall and tread area) of this tire. For example, “PLIES: TREAD 2 STEEL + 2 POLYESTER + 1 NYLON SIDEWALL 2 POLYESTER” ! Uniform Tire Quality Grading (UTQG) s13ab010305 For details, refer to “Uniform Tire Quality Grading Standards” P529. & Recommended Tire Inflation Pressure s13ab02 ! Recommended cold tire inflation pressure s13ab0201 For the recommended cold tire inflation pressure for your vehicle’s tires, refer to “Tires” P507. 518 Tire Information ! Vehicle placard s13ab0202 The vehicle placard is affixed to the driver’s side B-pillar. Example: The vehicle placard shows original tire size, recommended cold tire inflation pressure on each tire at maximum loaded vehicle weight, seating capacity and loading information. ! Adverse safety consequences of under-inflation s13ab0203 Driving at high speeds with excessively low tire pressures can cause the tires to flex severely and to rapidly become hot. A sharp increase in temperature could cause tread separation, and failure of the tire(s). Possible resulting loss of vehicle control could lead to an accident. ! Measuring and adjusting air pressure to achieve proper inflation s13ab0204 Check and, if necessary, adjust the pressure of each tire (including the spare) at least once a month and before any long journey. Check the tire pressures when the tires are cold. Use a pressure gauge to adjust the tire pressures to the specific values. Driving even a short distance warms up the tires and increases the tire pressures. Also, the tire pressures are affected by the outside temperature. It is best to check tire pressure outdoors before driving the vehicle. When a tire becomes warm, the air inside it expands, causing the tire pressure to increase. Be careful not to mistakenly release air from a warm tire to reduce its pressure. & Glossary of Tire Terminology s13ab03 . Accessory weight The combined weight (in excess of those standard items which may be replaced) of automatic transmission, power steering, power brakes, power windows, power seats, radio, and heater, to the extent that these items are available as factory-installed equipment (whether installed or not). . Bead The part of the tire that is made of – CONTINUED – Tire Information 519 13 Consumer Information and Reporting Safety Defects steel wires, wrapped or reinforced by ply cords and that is shaped to fit the rim. . Bead separation A breakdown of the bond between components in the bead. . Bias ply tire A pneumatic tire in which the ply cords that extend to the beads are laid at alternate angles substantially less than 90 degrees to the centerline of the tread. . Carcass The tire structure, except tread and sidewall rubber which, when inflated, bears the load. . Chunking The breaking away of pieces of the tread or sidewall. . Cold tire pressure The pressure in a tire that has been driven less than 1 mile or has been standing for three hours or more. . Cord The strands forming the plies in the tire. . Cord separation The parting of cords from adjacent rubber compounds. . Cracking Any parting within the tread, sidewall, or inner liner of the tire extending to cord material. . Curb weight The weight of a motor vehicle with standard equipment including the maximum capacity of fuel, oil and coolant, and if so equipped, air conditioning and additional weight optional engine. . Extra load tire A tire designed to operate at higher loads and higher inflation pressure than the corresponding standard tire. . Groove The space between two adjacent tread ribs. . Innerliner The layer(s) forming the inside surface of a tubeless tire that contains the inflating medium within the tire. . Innerliner separation The parting of the innerliner from cord material in the carcass. . Intended outboard sidewall (1) The sidewall that contains a whitewall, bears white lettering or bears manufacturer, brand, and/or model name molding that is higher or deeper than the same molding on the other sidewall of the tire, or (2) The outward facing sidewall of an asymmetrical tire that has a particular side that must always face outward when mounting on a vehicle. . Light truck (LT) tire A tire designated by its manufacturer as primarily intended for use on lightweight trucks or multipurpose passenger vehicles. . Load rating The maximum load that a tire is rated to carry for a given inflation pressure. 520 Tire Information . Maximum inflation pressure The maximum cold inflation pressure to which a tire may be inflated. . Maximum load rating The load rating for a tire at the maximum permissible inflation pressure for that tire. . Maximum loaded vehicle weight The sum of: (a) Curb weight (b) Accessory weight (c) Vehicle capacity weight (d) Production options weight . Maximum permissible inflation pressure The maximum cold inflation pressure to which a tire may be inflated. . Measuring rim The rim on which a tire is fitted for physical dimension requirements. . Normal occupant weight 150 lbs (68 kg) times the number of occupants specified in the second column of Table 1 that is appended to the end of this section. . Occupant distribution Distribution of occupants in a vehicle as specified in the third column of Table 1 that is appended to the end of this section. . Open splice Any parting at any junction of tread, sidewall, or innerliner that extends to cord material. . Outer diameter The overall diameter of an inflated new tire. . Overall width The linear distance between the exteriors of the sidewalls of an inflated tire, including elevations due to labeling, decorations, or protective bands or ribs. . Passenger car tire A tire intended for use on passenger cars, multipurpose passenger vehicles, and trucks, that have a gross vehicle weight rating (GVWR) of 10,000 lbs (4,535 kg) or less. . Ply A layer of rubber-coated parallel cords. . Ply separation A parting of rubber compound between adjacent plies. . Pneumatic tire A mechanical device made of rubber, chemicals, fabric and steel or other materials, that, when mounted on an automotive wheel, provides the traction and contains the gas or fluid that sustains the load. . Production options weight The combined weight of those installed regular production options weighing over 5.1 lbs (2.3 kg) in excess of those standard items which they replace, not previously considered in curb weight or accessory weight, including heavy duty brakes, ride levelers, roof rack, heavy duty battery, and special trim. . Radial ply tire A pneumatic tire in which the ply cords that extend to the beads are laid at substantially 90 degrees to the centerline of the tread. . Recommended inflation pressure The cold inflation pressure recom- – CONTINUED – Tire Information 521 13 Consumer Information and Reporting Safety Defects mended by a vehicle manufacturer. . Reinforced tire A tire designed to operate at higher loads and at higher inflation pressures than the corresponding standard tire. . Rim A metal support for a tire or a tire and tube assembly upon which the tire beads are seated. . Rim diameter Nominal diameter of the bead seat. . Rim size designation Rim diameter and width. . Rim type designation The industry of manufacturer’s designation for a rim by style or code. . Rim width Nominal distance between rim flanges. . Section width The linear distance between the exteriors of the sidewalls of an inflated tire, excluding elevations due to labeling, decoration, or protective bands. . Sidewall That portion of a tire between the tread and bead. . Sidewall separation The parting of the rubber compound from the cord material in the sidewall. . Snow tire A tire that attains a traction index equal to or greater than 110, compared to the ASTM E1136-93 Standard Reference Test Tire, when using the snow traction test as described in ASTM F-1805-00, Standard Test Method for Single Wheel Driving Traction in a Straight Line on Snow-and Ice-Covered Surfaces, and that is marked with an Alpine Symbol “ ” on at least one sidewall. . Test rim The rim on which a tire is fitted for testing, and it may be any rim listed as appropriate for use with that tire. . Tread That portion of a tire that comes into contact with the road. . Tread rib A tread section running circumferentially around a tire. . Tread separation Pulling away of the tread from the tire carcass. . Treadwear indicators (TWI) The projections within the principal grooves designed to give a visual indication of the degrees of wear of the tread. . Vehicle capacity weight The rated cargo and luggage load plus 150 lbs (68 kg) times the vehicle’s designated seating capacity. . Vehicle maximum load on the tire Load on an individual tire that is determined by distributing to each axle its share of the maximum loaded vehicle weight and dividing by two. . Vehicle normal load on the tire Load on an individual tire that is determined by distributing to each axle its share of the curb weight, accessory weight, and normal oc- 522 Tire Information cupant weight (distributed in accordance with Table 1 that is appended to the end of this section) and dividing by 2. . Wheel-holding fixture The fixture used to hold the wheel and tire assembly securely during testing. Table 1 Occupant loading and distribution for vehicle normal load for various designated seating capacities Designated seating capacity, number of occupants Vehicle normal load, number of occupants Occupant distribution in a normally loaded vehicle 2 through 4 2 2 in front. 5 through 10 3 2 in front, 1 in second seat. 11 through 15 5 2 in front, 1 in second seat, 1 in third seat, 1 in fourth seat. 16 through 22 7 2 in front, 2 in second seat, 2 in third seat, 1 in fourth seat. – CONTINUED – Tire Information 523 13 Consumer Information and Reporting Safety Defects & Tire Care – Maintenance and Safety Practices s13ab04 . Check on a daily basis that the tires are free from serious damage, nails, and stones. At the same time, check the tires for abnormal wear. . Inspect the tire tread regularly and replace the tires before their tread wear indicators become visible. When a tire’s tread wear indicator becomes visible, the tire is worn beyond the acceptable limit and must be replaced immediately. With a tire in this condition, driving at even low speeds in wet weather can cause the vehicle to hydroplane. Possible resulting loss of vehicle control can lead to an accident. . To maximize the life of each tire and ensure that the tires wear uniformly, it is best to rotate the tires every 6,000 miles (10,000 km). For details about tire rotation, refer to “Tire Rotation” P480. Replace any damaged or unevenly worn tire at the time of rotation. After tire rotation, adjust the tire pressures and make sure the wheel nuts are correctly tightened. For information about the tightening torque and tightening sequence for the wheel nuts, refer to “Flat Tires” P429. & Vehicle Load Limit – How to Determine s13ab05 The load capacity of your vehicle is determined by weight, not by available cargo space. The load limit of your vehicle is shown on the vehicle placard attached to the driver’s side B-pillar. Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs” on your vehicle’s placard. The vehicle placard also shows seating capacity of your vehicle. The total load capacity includes the total weight of driver and all passengers and their belongings, any cargo, any optional equipment such as a trailer hitch, roof rack or bike carrier, etc., and the tongue load of a trailer. Therefore cargo capacity can be calculated by the following method. Cargo capacity = Load limit − (total weight of occupants + total weight of optional equipment + tongue load of a trailer (if applicable)) ! Calculating total and load capacities varying seating configurations s13ab0501 Calculate the available load capacity as shown in the following examples: 524 Tire Information Example 1A Vehicle capacity weight of the vehicle is 800 lbs (363 kg), which is indicated on the vehicle placard with the statement “The combined weight of occupants and cargo should never exceed 363 kg or 800 lbs”. For example, if the vehicle has one occupant weighing 154 lbs (70 kg) plus cargo weighing 551 lbs (250 kg). 1. Calculate the total weight. 2. Calculate the available load capacity by subtracting the total weight from the vehicle capacity weight of 800 lbs (363 kg). 3. The result of step 2 shows that a further 95 lbs (43 kg) of cargo can be carried. Example 1B For example, if a person weighing 176 lbs (80 kg) now enters the same vehicle (bringing the number of occupants to two), the calculations are as follows: 1. Calculate the total weight. – CONTINUED – Tire Information 525 13 Consumer Information and Reporting Safety Defects 2. Calculate the available load capacity. 3. The total weight now exceeds the capacity weight by 81 lbs (37 kg), so the cargo weight must be reduced by 81 lbs (37 kg) or more. Example 2A CAUTION Your vehicle is neither designed nor intended to be used for trailer towing. Therefore, never tow a trailer with your vehicle. Vehicle capacity weight of the vehicle is 800 lbs (363 kg), which is indicated on the vehicle placard with the statement “The combined weight of occupants and cargo should never exceed 363 kg or 800 lbs”. For example, the vehicle has one occupant weighing 165 lbs (75 kg) plus cargo weighing 265 lbs (120 kg). In addition, the vehicle is fitted with a trailer hitch weighing 22 lbs (10 kg), to which is attached a trailer weighing 1,764 lbs (800 kg). 10% of the trailer weight is applied to the trailer tongue (i.e. Tongue load = 176 lbs (80 kg)). 1. Calculate the total weight. 2. Calculate the available load capacity. 3. The result of step 2 shows that a further 172 lbs (78 kg) of cargo can be carried. 526 Tire Information Example 2B CAUTION Your vehicle is neither designed nor intended to be used for trailer towing. Therefore, never tow a trailer with your vehicle. For example, if a person weighing 143 lbs (65 kg) and a child weighing 40 lbs (18 kg) now enter the same vehicle (bringing the number of occupants to three), and a child restraint system weighing 11 lbs (5 kg) is installed in the vehicle for the child to use, the calculations are as follows: 1. Calculate the total weight. 2. Calculate the available load capacity. 3. The total weight now exceeds the capacity weight by 22 lbs (10 kg), so the cargo weight must be reduced by 22 lbs (10 kg) or more. & Determining Compatibility of Tire and Vehicle Load Capacities s13ab06 The sum of four tires’ maximum load ratings must exceed the maximum loaded vehicle weight (“GVWR”). In addition, sum of the maximum load ratings of two front tires and of two rear tires must exceed each axle’s maximum loaded capacity (“GAWR”). Original equipment tires are designed to fulfill those conditions. The maximum loaded vehicle weight is referred to Gross Vehicle Weight Rating (GVWR). And each axle’s maximum loaded capacity is referred to Gross Axle Weight Rating (GAWR). The GVWR and each axle’s GAWR are shown on the vehicle certification label affixed to the driver’s door. The GVWR and front and rear GAWRs are determined by not only – CONTINUED – Tire Information 527 13 Consumer Information and Reporting Safety Defects the maximum load rating of tires but also loaded capacities of the vehicle’s suspension, axles and other parts of the body. Therefore, this means that the vehicle cannot necessarily be loaded up to the tire’s maximum load rating on the tire sidewall. & Adverse Safety Consequences of Overloading on Handling and Stopping and on Tires s13ab07 Overloading could affect vehicle handling, stopping distance, vehicle and tire as shown in the following. This could lead to an accident and possibly result in severe personal injury. . Vehicle stability will deteriorate. . Heavy and/or high-mounted loads could increase the risk of rollover. . Stopping distance will increase. . Brakes could overheat and fail. . Suspension, bearings, axles and other parts of the body could break or experience accelerated wear that will shorten vehicle life. . Tires could fail. . Tread separation could occur. . Tire could separate from its rim. & Steps for Determining Correct Load Limit s13ab08 1. Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs.” on your vehicle’s placard. 2. Determine the combined weight of the driver and passengers that will be riding in your vehicle. 3. Subtract the combined weight of the driver and passengers from XXX kg or XXX lbs. 4. The resulting figure equals the available amount of cargo and luggage load capacity. For example, if the “XXX” amount equals 1,400 lbs (635 kg) and there will be five 150 lbs (68 kg) passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs (1,400 − 750 (5 6 150) = 650 lbs). 5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle. 528 Tire Information 13-3. Uniform Tire Quality Grading Standards s13ac This information indicates the relative performance of passenger car tires in the area of treadwear, traction, and temperature resistance. This is to aid the consumer in making an informed choice in the purchase of tires. Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: TREADWEAR 200 TRACTION AA TEMPERATURE A The quality grades apply to new pneumatic tires for use on passenger cars. However, they do not apply to deep tread, winter type snow tires, space-saver or temporary use spare tires, tires with nominal rim diameters of 12 inches or less, or to some limited production tires. All passenger car tires must conform to Federal Safety Requirements in addition to these grades. & TREADWEAR s13ac02 The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half (1- 1/2) times as well on the government course as a tire graded 100. The relative performance of tires depends upon the actual conditions of their use, however, and may depart significantly from the norm due to variations in driving habits, service practices and differences in road characteristics and climate. & TRACTION AA, A, B, C s13ac03 The traction grades, from highest to lowest, are AA, A, B and C. Those grades represent the tire’s ability to stop on wet pavement as measured under controlled conditions on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance. WARNING The traction grade assigned to this tire is based on straightahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics. & TEMPERATURE A, B, C s13ac04 The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature – CONTINUED – Uniform Tire Quality Grading Standards 529 13 Consumer Information and Reporting Safety Defects can lead to sudden tire failure. The grade C corresponds to a level of performance which all passenger car tires must meet under the Federal Motor Vehicle Safety Standard No. 109. Grades B and A represent higher levels of performance on the laboratory test wheel than the minimum required by law. WARNING The temperature grade for this tire is established for a tire that is properly inflated and not overloaded. Excessive speed, underinflation, or excessive loading, either separately or in combination, can cause heat buildup and possible tire failure. 13-4. Reporting Safety Defects (USA) s13ah If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Subaru of America, Inc. If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your dealer, or Subaru of America, Inc. To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1- 888-327-4236 (TTY: 1-800-424- 9153); go to http://www.safercar. gov; or write to: Administrator, NHTSA, 1200 New Jersey Avenue, SE, West Building, Washington, DC 20590. You can also obtain other information about motor vehicle safety from http://www.safercar. gov. 530 Reporting Safety Defects (USA) 13-5. How to Contact Transport Canada in Order to Report a Safety Concern Relating to the Vehicle (Canada) s13cf How to Contact Transport Canada in Order to Report a Safety Concern Relating to the Vehicle (Canada) 531 13 Consumer Information and Reporting Safety Defects s14 Index 14 Index There is an illustrated index in this Owner’s Manual. If you have difficulty finding your target items in the index, try to use the illustrated index. Illustrated index . 15 1 11.6-inch display models 190 A Abbreviation 4 ABS (Anti-lock Brake System) 336 Warning light 164 Access key Warning indicator 170 Access key fob . 108 Warning indicator 170 Accessories . 491 Accessory power outlet . 288 Activation of valet mode 230 Air cleaner element . 469 Air conditioner Automatic climate control. 267 Manual climate control system . 269 Air filtration system . 275 Airflow mode selection. 269 Alarm system . 133 All season tires. 474 All-Wheel Drive. 399 All-Wheel Drive Warning Light 168 All-Wheel Drive warning light 168 All-Wheel Drive warning light 168 All-Wheel Drive warning light . 168 Alloy wheel 482 Cleaning . 449 Antenna 280 Roof antenna. 280 Anti-lock Brake System (ABS) 336 Arming the system 133 Armrest . 41 Ashtray . 296 Assist grip . 297 AT OIL TEMP warning light 162 Audio Antenna 280 Set . 280 Auto dimmer cancel function 156 Auto on/off headlights . 232 Sensor 234 Auto Start Stop ON/OFF icon 194, 220 Auto Start Stop system . 353 Indicator light 177, 353 No Activity Detected indicator light 178, 357 OFF indicator light. 177, 356 ON/OFF icon 194, 220 Warning light 177, 356 Auto Vehicle Hold. 348 Function 348 ON indicator light . 167 ON/OFF icon 194, 220 Auto Vehicle Hold function. 348 Auto Vehicle Hold icon 220 Auto-dimming mirror/compass. 248, 249 534 Index Automatic climate control operation. 267 Automatic headlight beam leveler . 240 Warning light 176 Automatic Locking Retractor/Emergency Locking Retractor (ALR/ELR) . 43 Automatic transmission Fluid 471 B Battery 488 Drainage prevention function 132 Drainage reduction functions 132, 152 Jump starting . 433 Replacement (access key fob) . 497 Replacement (remote engine start transmitter) . 324 Replacement (transmitter) 498 Vehicle battery 488 Blind Spot Detection (BSD) 363 Booster cushion. 66 Booster seat 66 Bottle holder. 288 Brake 334 Assist 335 Breaking-in of new brake pads . 474 Disc 508 Disc Brake Pad Wear Warning Indicators 335 Fluid 472, 506 Pad . 474 Parking 345 Pedal 473 Tips. 334 Brake system. 334 Assist . 335 Warning light . 165 Braking . 334 Tips 334 Breaking-in of new brake pads. 474 BSD/RCTA 362 Approach indicator light/warning buzzer 366 OFF indicator 178, 368 Warning indicator 178, 368 Warning volume . 367 Bulb Chart 509 Replacement . 491 C Camera Rear view camera 358 Cargo area Cover . 300 Light 283, 491 Tie-down hooks . 302 Catalytic converter 397 Center console. 286 Center information display (CID) 188 11.6-inch display models . 190 Cleaning . 452 Display Off 195 Dual 7.0-inch display models . 213 Changing Coolant . 469 Index 535 14 Index Engine oil and oil filter. 466 Flat tire 429 Oil and oil filter . 466 Washer fluid. 483 Charge warning light . 162 CHECK ENGINE warning light/Malfunction indicator light 161 Checking Coolant level 468 Fluid level (brake fluid) 472 Fluid level (washer fluid) 483 Oil level (engine oil) 465 Child restraint systems . 56 Installation of a booster cushion 66 Installation of a booster seat . 66 Installation with ALR/ELR seatbelt . 61 Lower and tether anchorages (LATCH). 68 Top tether anchorages 72 Child safety. 5 Locks 136 Chime Key reminder 149 Light 231 Seatbelt . 157 Cleaning Alloy wheels. 449 Center information display . 452 Exterior care 448 Interior. 451 Ventilation grille 274 Climate control system 262 Automatic 267 Manual . 269 Clock 227 Time zone . 229 Clutch Fluid . 506 Coat hook 298 Combination meter display (color LCD) . 180 Compass 248, 249 Console Center 286 Continuously variable transmission (CVT) . 326 Fluid 471, 506 Oil temperature warning light (AT OIL TEMP) 162 Convenient tie-down hooks 302 Coolant 468, 507 Changing 469 Temperature Gauge 154 Cooling system 467 Corrosion protection 450 Cup holder. 287 Front passenger’s 287 Rear passenger’s. 287 D Daytime running light (DRL) system 238 Deactivation of valet mode 231 Defogger . 246 Defrosting 273 Deicer . 246 Differential gear oil . 472 536 Index Front . 506 Rear 506 Dimensions 502 Disarming the alarm system. 134 Disc brake pad wear warning indicators 335 Display off icon. 218 Dome light . 282, 491 Door Locks 128 Open indicator 168 Unlock selection function . 115 Double trip meter 153 Drainage reduction functions 132, 152 Drive belts . 471 DriverFocus . 382 Driver Monitoring System. 209, 382 OFF indicator light 179 Operation indicator light. 179 Register user 209 Temporary stop indicator light. 180 Warning light 179 Driving All-Wheel Drive model . 399 Drinking 7 Drugs . 7 Foreign countries 398 Off road . 400 Pets . 8 Snowy and icy roads. 403 Tips. 331, 399 Tired or sleepy 7 Winter. 402 Dual 7.0-inch display models . 213 E Electrical system 507 Electronic Brake Force Distribution (EBD) system 336 Warning 166 Electronic parking brake 345 Automatic release function by accelerator pedal 347 Indicator light . 166 Switch. 345 Warning . 166, 351 Emergency Locking Retractor (ELR). 42 Engine 503 Compartment overview . 464 Coolant 468, 507 Exhaust gas (carbon monoxide). 6, 396 Hood 462 Hood open warning light . 168 Hood release knob . 462 Low oil level warning indicator . 162 Oil . 465, 504 Overheating. 435 Starting & stopping 313, 315 Event data recorder 12 Exterior care 448 F Flat tires 429 Floor mat. 298 Index 537 14 Index Fluid Brake 472 Continuously variable transmission (CVT) 471 Fluid level 506 Fluid level Brake 472 Continuously variable transmission . 471 Fog light 240 Indicator light 177 Switch . 240 Front Differential gear oil 472, 506 Passenger’s frontal airbag ON and OFF indicators . 160 Passenger’s seatbelt warning light 157 Seatbelt pretensioners 52 Turn signal light 492 Front seats 30 Forward and backward adjustment 33 Head restraint adjustment . 34 Manual seat 33 Power seat 33 Reclining . 33, 34 Seat height adjustment. 33 Seat height adjustment (Driver’s seat) 34 Fuel 307, 503 Consumption indicator. 185 Economy hints 396 Filler lid and cap . 308 Gauge . 154 Low fuel warning light 167 Requirements . 307, 503 Tank capacity. 503 Fuses 490 G GAWR (Gross Axle Weight Rating). 407 Glove box 285 GVWR (Gross Vehicle Weight Rating) 407 H Hazard warning flasher 152, 426 Head restraint adjustment Front seat 34 Rear seat . 39 Headlight. 232 Aim adjustment 495 Beam leveler . 240 Control switch 231 Flasher . 235 Indicator light . 177 Warning light . 177 Welcome lighting function 233 High Beam Assist Function 235 Indicator 176 High/low beam change (dimmer) 234 Hill descent control . 342 Indicator 178 Hill start assist . 352 Hill start assist system 352 HomeLink® . 249 538 Index Hook Coat 298 Convenient tie-down . 302 Shopping bag. 299 Towing and tie-down . 436 Horn 259 Hose and connections. 468 I Icy road surface warning indicator. 178 Ignition switch 148 Light 149 Illumination brightness control 155 Immobilizer 123 Indicator light Auto Start Stop. 177 Auto Start Stop No Activity Detected. 178 Auto Start Stop OFF . 177 Auto Vehicle Hold ON . 167 BSD/RCTA OFF . 178, 368 Door open 168 Driver Monitoring System OFF . 179 Driver Monitoring System operation 179 Driver Monitoring System temporary stop 180, 389 Electronic parking brake 166 Front fog light. 177 Front passenger’s frontal airbag ON and OFF 160 Headlight . 177 High beam . 176 High beam assist 176, 235 Hill descent control . 178 Immobilizer 175 Intelligent (I) mode 176, 332 Malfunction 161 RAB OFF 179 Security . 123, 175 Select lever/Gear position . 176 SI-DRIVE 176 Sonar Audible Alarm OFF . 179 Sonar audible alarm OFF 179 Sport (S) mode . 176, 332 Sport Sharp (S#) mode. 176 Steering Responsive Headlight OFF. 177 Turn signal 176 Vehicle Dynamics Control OFF 170 Vehicle Dynamics Control operation . 169 X-MODE . 178 Indicator/Indicator light Auto Start Stop . 177, 353 Auto Start Stop No Activity Detected . 178, 357 Auto Start Stop OFF 177, 356 Auto Vehicle Hold 167, 348 Door open . 168 Driver Monitoring System OFF. 179 Driver Monitoring System operation. 179, 389 Driver Monitoring System temporary stop. 180, 389 Electronic parking brake. 166, 345 Front fog light 177 Front passenger’s frontal airbag ON and OFF . 160 Headlight. 177 High beam . 176, 232 High Beam Assist 176, 235 Index 539 14 Index Hill descent control . 178, 343 Intelligent (I) mode 176, 332 RAB OFF 179, 374, 380 Select lever/Gear position 176 SI-DRIVE. 176, 332 Sonar audible alarm OFF 179 Sport (S) mode. 176, 332 Steering Responsive Headlight OFF . 177 Turn signal. 176 Vehicle Dynamics Control OFF. 170, 337 Vehicle Dynamics Control operation 169, 337 X-MODE 178, 341 Inside mirror. 247 Interior lights 282 J Jack and jack handle 428 Jack-up point 429 Jump starting . 433 K Key . 108 Access key fob . 108, 124 Number plate . 108 Positions 148 Reminder chime . 149 Replacement 123 Keyless access with push-button start system 108 Disabling keyless access functions . 118 Locking and unlocking doors 112 Warning chimes and warning indicator 121, 170 When access key fob does not operate properly 441 Keyless entry system 124 L Lane Change Assist (LCA) 363 Lap belt pretensioner 54 Leather seat materials. 451 LED headlight warning light 177, 492 LED headlights. 492 License plate light 494 Lifting Cargo Cover. 300 Light Back-up 510 Back-up (Sedan) 493 Back-up/Rear fog (Sedan). 493 Back-up/Rear fog light (if equipped) . 493 Backup . 510 Cargo area . 283, 491, 510 Control switch 231 Daytime running. 238 Dome 282, 491, 510 Front fog . 240 Front side marker. 232 Front turn signal. 492 Ignition switch 149 License plate . 494 Map. 282, 491, 510 Rear combination 492, 510 Rear fog. 493, 510 Rear turn signal 241, 492, 510 Turn signal . 241, 492, 510 540 Index Vanity mirror 284, 491, 510 Loading your vehicle . 406 Low fuel warning light 167 Low tire pressure warning light . 163 Lower anchors and tethers for children (LATCH) . 68 Lower and top tether anchorage 68 M Maintenance Precautions 457 Schedule . 457 Seatbelt 50 Tips. 460 Tools . 428 Malfunction indicator light (CHECK ENGINE warning light). 161 Manual Climate control . 269 Mode (continuously variable transmission) . 330 Seat . 33 Manual transmission oil . 506 Map light 282, 491, 510 Maximum load limits 415 Meters and gauges . 152 Mirror defogger. 246 Mirrors. 247 Moonroof . 140, 445 Switch . 141 N New vehicle break-in driving 396 O Odometer 153 Off road driving 400 Oil filter . 466 Oil level Differential gear . 472 Engine 465 Warning light . 162 Oil pressure warning light 162 On-road and off-road driving . 9 One-touch lane changer 241 Outside Mirror defogger 246 Mirrors 256 Overheating engine 435 P Parking . 345 Brake 345 Tips 351 Parking your vehicle Parking Brake 345 Tips 351 Passenger seatbelt reminder . 157 Periodic inspections 398 Petrol fuel 307 PIN Code Access . 115 PIN Code Lock. 230 Power Outlets 288 Outside mirrors 257 Index 541 14 Index Seat . 33 Steering. 333 Steering warning light 168 Window switches 137 Windows 136 Precautions against vehicle modification 55, 104 Preparing to drive . 312 Push-button Ignition switch 150 Starting and stopping engine 315 R Rear Combination lights 492 Differential gear oil 472, 506 Gate 442 Turn signal light 492 Rear Cross Traffic Alert (RCTA) 364 Rear gate 139 Rear Seat Reminder 56 Rear seatbelt warning light. 159 Rear seats 37 Armrest 41 Folding down. 37 Head restraint adjustment . 39 Rear view camera. 358 Rear window Defogger . 246 Wiper and washer switch. 244 Wiper blade rubber . 487 Wiper blades 487 Recommended Brake fluid. 506 Clutch fluid 506 Continuously variable transmission fluid 506 Differential gear oil . 472 Engine oil 504 Front differential gear oil . 506 Manual transmission oil 506 Rear differential gear oil 506 Spark plugs . 507 Refueling. 308 Remote control mirror switch . 257 Remote engine start system 319 Replacing battery . 324 Remote keyless entry system 124 Replacing battery . 496 Replacement Access key fob battery 497 Air cleaner element 470 Brake pad . 473 Cabin air filter 276 Key 123 Remote engine start transmitter battery 324 Remote keyless entry transmitter battery . 127, 498 Tire. 481 Wheel . 482 Wiper blade rubber. 484 Wiper blades . 484 Replacing bulbs . 491 Back-up light (Sedan) . 493 Back-up light/Rear fog light (if equipped). 493 542 Index Back-up light/Rear fog light (Sedan) 493 Front turn signal light 492 Headlight . 492 License plate light. 494 Rear combination light. 492 Rear turn signal light . 492 Reverse Automatic Braking (RAB) system OFF indicator . 179 ON/OFF setting 380 Warning indicator 179, 381 Rocking the vehicle. 406 Roof Antenna. 280 Molding and crossbar 409 Roof rails . 408 Roof tent . 410 S Safety Precautions when driving 5 Symbol . 4 Warnings 3 Seat Fabric 451 Front 30 Heater 35 Height adjustment 34 Manual . 33 Power. 33 Rear. 37 Seatbelt . 5, 41 Extender 50 Fastening . 43 Maintenance. 50 Pretensioners . 52 Safety tips 41 Warning light and chime 157 Security Alarm system. 133 Immobilizer 123 Indicator light . 175 Select lever . 327 Position indicator 176 Shift lock function. 328 Shift paddle . 330 Shopping bag hook. 299 Shoulder pretensioners . 53 SI-DRIVE 332 Indicator light . 176 Intelligent (I) mode indicator . 176, 332 Mode 332 Sport (S) mode indicator . 332 Sport Sharp (S#) mode indicator 176 Switch. 332 Snow tires 405, 475 Snowy and icy roads 403 Sonar Audible Alarm OFF indicator 179 Sounding a panic alarm 127 Spark plugs 471, 507 Specifications. 502 Speedometer . 152 Index 543 14 Index SRS airbag (Supplemental Restraint System airbag) 5, 74 System monitors. 102 System servicing 103 System warning light 83, 102, 160 Starting & stopping engine . 313, 315 State emission testing (U.S. only) . 311 Steering lock 315, 318 Steering Responsive Headlight (SRH) . 238 OFF indicator light 177, 238 OFF switch 238 Warning light 177 Steering wheel Heater . 258 Lock 315, 318 Power 333 Tilt/telescopic . 257 Warning light 168 Storage compartment 285 Summer tires 474 Sun visors 283 Sunshade 142 Supplemental Restraint System (SRS) . 74 Supplemental Restraint System (SRS) airbag 5, 74 Curtain airbag 81, 95 Driver’s airbag . 81 Far-side airbag . 81, 95 Front passenger’s airbag 81 Knee airbag 81 Seat cushion airbag . 81 Side airbag 81, 95 Supplemental Restraint System airbag (SRS) 74 Curtain airbag. 95 Side airbag. 95 Synthetic leather upholstery. 452 T Tachometer 153 Temperature gauge. 154 Temperature warning light AT OIL TEMP 162 Temporary spare tire 426, 508 Tether (child restraint system) 68, 72 Tie-down hooks 436 Tilt/telescopic steering wheel . 257 Tire 474, 507 All season . 474 Chains 405 Information 516 Inspection . 476 Pressures and wear . 477 Replacement . 481 Rotation 480 Size and pressure 507 Summer 474 Types . 474 Winter (snow) 475 Tire pressure monitoring system (TPMS) 163, 343, 432, 475 Screen 345 Warning light . 163 Tires and wheels 474 544 Index Tools . 428 Top tether anchorages. 68, 72 Towing. 436 All wheels on the ground . 439 Flat-bed truck . 439 Hooks 436 Tie-down hooks 436 Weight. 415 Trailer Connecting 413 Hitch (Outback) 412, 418 Towing (Outback) 414 Towing tips. 420 Trip meter 153 Turn signal Indicator lights 176 Lever. 241 U Under-floor storage compartment 302 USB power supply 289 V Valet mode. 135, 230 Vanity mirror. 284 Light 284, 491 Vehicle Capacity weight 407 Identification. 512 Symbols . 5 Vehicle Dynamics Control Operation indicator light 169 Warning light . 169 Vehicle Dynamics Control icon . 220 Vehicle Dynamics Control system. 337 OFF indicator light 170 Ventilator . 262 W Warning and indicator lights. 156 Warning chimes Driver Monitoring System 389 Keyless access with push-button start system . 170 Seatbelt 157 Warning indicator Access key 170 BSD/RCTA 178 Engine low oil level 162 Icy road surface . 178 Keyless access with push-button start system . 170 RAB 179, 381 Warning light ABS 164 All-Wheel Drive 168 AT OIL TEMP 162 Auto Start Stop 177 Automatic headlight beam leveler. 176 Brake system. 165 Charge . 162 CHECK ENGINE 161 Driver Monitoring System 179 Index 545 14 Index Engine hood open 168 Front passenger’s seatbelt. 157 LED headlight 177 Low fuel. 167 Low tire pressure 163 Oil pressure . 162 Power steering . 168 Rear seatbelt 159 Seatbelt . 157 SRS airbag system . 160 Steering Responsive Headlight. 177 Vehicle Dynamics Control 169 Windshield washer fluid . 168 Warning light/Warning indicator ABS 164 Access key 170 All-Wheel Drive. 168 AT OIL TEMP . 162 Auto Start Stop. 177, 356 Automatic headlight beam leveler . 176 Brake system . 165 Charge 162 Disc brake pad wear . 335 Driver Monitoring System. 179, 389 Engine hood open 168 Engine low oil level . 162 Icy road surface 178 Keyless access with push-button start system 170 LED headlight 177, 492 Low fuel. 167 Low tire pressure 163, 343 Oil pressure. 162 Power steering 168, 333 RAB 179, 374, 381 Seatbelt 157 SRS airbag system . 83, 102, 160 Steering Responsive Headlight 177 Vehicle Dynamics Control . 169 Windshield washer fluid 168 Warranties 2 Warranties and maintenance . 415 Washing 448 Waxing and polishing 449 Wear indicators 479 Welcome lighting function 233 Wheel Alloy . 482 Balance 479 Nut tightening torque . 507, 508 Replacement . 482 Windows . 136 Windshield Washer fluid 483 Washer fluid warning light . 168 Wiper and washer switches. 243 Wiper blades . 485 Wiper deicer 246 Winter Driving 402 Tires 405, 475 Wiper and washer 241 Wiper deicer 246 546 Index X X-MODE 340 Indicator 178 Index 547