| “This site contains affiliate links for which OEMDTC may be compensated” |
Accessory Installation Guide
| 2024MY Crosstrek and Impreza – STI CVT SHIFT KNOB | C1010FN000 |
INSTALLATION INSTRUCTIONS
PART NUMBER: C1010FN000
DESCRIPTION: STI CVT SHIFT KNOB
STEP 1: Park vehicle on level surface. Apply parking brake. Place vehicle in “P” Park.
STEP 2: Use plastic trim removal tool to pry and push down on the factory cover grip.
STEP 3: From the front of the shift knob, use your fingernail to pull the pre-installed pin clip forward. Then remove the OE shift knob by lifting it upward.
STEP 4: Check to make sure pre-installed pin clip is still installed on the STI CVT Shift Knob. NOTE: Place your finger over the pin clip. Carefully align and position shift knob and then push down until a click is heard. CAUTION: If your finger is not placed over the pin clip during the downward push, the pin clip may eject and get lost. If the pin clip comes loose, you can still install it by holding down the shift knob while inserting the pin clip towards the back of the vehicle until it engages.
PRE INSTALLED PIN CLIP
NOTE: Shown separated for clarity
STEP 5: While holding down shift knob, pull the cover grip upward until a click is heard.
STEP 6: Depress brake pedal. Confirm that the shift knob is firmly installed and that the button can be fully depressed. Make sure the shift knob is properly installed before operating the vehicle. Turn on ignition, depress and hold brake pedal, confirm shift lever cannot shift out of “P” without depressing button. Confirm shift lever function by checking engagement into Reverse and MD modes.
https://static.oemdtc.com/AccessoryInstallationGuide/C1010FN000.pdf
Loading...
Reload document 
Open in new tab
- Compatible with most Acura, Honda, Infiniti, Lexus, Mazda, Mitsubishi, Nissan, Scion, Subaru, and Toyota models, and suitable for most 4, 5, 6-speed manual shift and some button-less automatic transmission shifters like the 1st Gen IS300
- Gloss black real carbon fiber cylinder barrel-shaped shift knob handle, measuring 1.25" in diameter and 2.90" long, includes a set of universal threading adapters to fit most M8 M10 M12 1.25 1.50 1.75 gear stick threads
- Weighing approximately 6oz, the mid-weighted design provides enough mass for a good shift feel without masking feedback from the gearbox
- Each knob, crafted with genuine twill-weave carbon fiber material with UV protective coating to complement its ergonomic shape, offers a simple and classic appearance, enhancing your vehicle's interior style with a sleek, racing sports touch
- To install the shift knob, unscrew the original gear knob, choose the compatible threading adapter and twist it onto the gear stick halfway, then place the new shift knob onto the shifter and twist until secure and properly aligned
- Fits For Subaru Crosstrek 2018 2019 2020 2021 2022 2023 2024 & Forester 2019 2020 2021 2022 2023 2024 & Impreza 2017 2018 2019 2020 2021 2022 2023 & Legacy 2020 2021 2022 2023 2024 & Outback 2020 2021 2022 2023 2024 Automatic; Pls confirm this product is suitable for your car before placing order, thank you!
- Quality of Genuine Leather ,it turn out our handbrake cover is anti-slip,breathable,odorless,soft and aging resistance also easy to clean.Please MAKE SURE your handbrake is the SAME as that in our picture otherwise it will NOT fit.
- An ideal replacement and upgrade to damaged or worn out original leather cover.Make your car looks brand new and enhance of value in sales.A good protection for original gear shift knob cover.
- Personality customization to give your gear shift knob cover a individuality feel while.
- Installation: Need to do a little easy sewing, we offer needle and thread.
- Wooden shift knob is made of aluminum
- Shift knob.2 1/8" diameter,200 Gram Weighted
- Racing JDM Shift Knob Itself Thread Size is M12x1.25,With 3 threading copper adapters:M8x1.25 M10x1.5 M10x1.25 . Manual Shifter Gear Knob Round Ball Installation
- shift knob come with universal thread adapters which will fit pretty much any cars such as Acura Honda Mazda Mitsubishi Toyota Scion Nissan Infiniti Subaru and many many more for 3-Speed 4-Speed 5-Speed, 6-Speed and also automatic
- Note:Will not fit automatic shifters with push button, fits gated style only
- Knob Shift 6 Speed Shifter Extension JDM Racing Manual Automatic with Adapter Screw on for Mazda Miata Subaru Focus ST 350z VB-04-6H3-01
- Shift knob designed for smooth and seamless gear changes; Steel construction for added weight and easier shifts
- Weighted for precise and accurate shift feel; Ergonomic shape allows for smooth shifting and comfortable hand position
- Purchase includes 3 insert sizes to fit various applications
- Insert thread pitch sizes: M8 x 1.25, M10 x 1.5, M12 x 1.25
- Compatible with most Acura, Honda, Infiniti, Lexus, Mazda, Mitsubishi, Nissan, Scion, Subaru, and Toyota models, and suitable for most 4, 5, 6-speed manual shift and some button-less automatic transmission shifters like the 1st Gen IS300
- High polished burnt titanium finish barrel-shaped shift knob handle, measuring 1.65" in diameter, and 3.00" long, includes a set of universal threading adapters to fit most M8 M10 M12 1.25 1.50 1.75 gear stick threads
- Weighing approximately 7oz, the mid-weighted design provides enough mass for a good shift feel without masking feedback from the gearbox
- Each knob, anodized in a durable high polished blue burnt finish to complement the ergonomic shape, offers a simple and classic appearance, enhancing your vehicle's interior style with a sleek, racing sports touch
- To install the shift knob, unscrew the original gear knob, choose the compatible threading adapter and twist it onto the gear stick halfway, then place the new shift knob onto the shifter and twist until secure and properly aligned
- 🏆 PREMIUM QUALITY - Our black shift knobs are made from High Quality Aluminum Alloy and have a protective clear coat finish. Measuring at 8 cm (H) x 3.5 cm (Top) x 2.5 cm (Bottom), our shift knob is sure to impress!
- 🥽 PROTECTIVE CLEAR COAT - Shift Knobs fade and lose their grip over time. We protect ours with a clear coating to prevent fading. This also allows for a smoother grip and the ability to shift your gear faster and easier. Pedal to the Metal!
- 🌎 ONE SIZE FITS MOST - While we would love for our cool shift knob to fit all vehicles, it is specifically designed for cars and trucks with a stick/manual 4, 5, or 6 speed or buttonless automatic transmission shifter. Cruise in the city with style!
- 🎨 CUSTOM DESIGN - You care about your ride, and we do too. This is why we take the time to custom make our shift knobs. With a variety of colors to choose from, you are sure to find the right look and fit for your ride!
- ✔️ EASY INSTALL: No modifications, tools, drilling or cutting needed. Simply remove the original shift knob, select the correct thread adapter (M8x1.25, M10x1.25, M10x1.5, M12x1.25) and screw your new shifter cover onto the knob rod. Perfect for cars, trucks and SUVs!
- High-end Quality: The body of this car gear lever is made of iron + logs, which is strong and durable and can withstand daily wear and tear without being prone to breakage and deformation. The exterior is wrapped with high-quality fabric, which is comfortable and breathable. The material is real and wear-resistant, and has an excellent anti-slip design.
- Unique Black Samurai Style: This shift knob is inspired by the Japanese Black Samurai sword. It is unique and creative, with exquisite pattern carvings on the surface, domineering patterns on the handle, and exquisite craftsmanship, adding texture, reflecting the beauty of art, and enhancing the sense of luxury inside the car.
- Improve Driving Experience: This gear lever knob provides you with a good grip than the original gear lever, you can better control and adjust the gear and speed, better control the gear lever, bring you a different and pleasant driving experience.
- Packing List: The package includes 1 x transmission knob, length 6.1". Comes with 1 x wrench, 6 x screws, 4 x adapters (8mm, 9.5mm, 10mm, 12mm) installation tools. Suitable for most manual transmission cars.
- Easy to Install: First remove the old gear lever, choose a suitable adapter to install the gear lever knob with screws, and use a hexagonal wrench to fix it. If you have any question on use, kindly contact us at any time directly, we will solve the problem for you within 24 hours on weekdays.
- ⭐EXEMPLARY CRAFTSMANSHIP - Impeccably fashioned from High-Quality Aluminum Alloy and meticulously coated with a protective clear finish, our black shift knobs epitomize superior craftsmanship. Measuring at 8 cm (H) x 3.5 cm (Top) x 2.5 cm (Bottom), our shift knob is a hallmark of excellence.
- ⭐UNIVERSAL ADAPTABILITY - Engineered to accommodate most vehicles, our sleek shift knob is tailored for cars and trucks featuring a stick/manual 4, 5, or 6-speed transmission, as well as buttonless automatic transmission shifters. Cruise the streets in style, wherever the journey takes you!
- ⭐BESPOKE DESIGN - Elevate your driving experience with our exquisitely crafted shift knobs. Available in a spectrum of vibrant colors, personalize your ride effortlessly and elevate your driving experience to new heights. Make a bold statement with every mile traveled!
- ⭐EFFORTLESS INSTALLATION - No need for cumbersome modifications, tools, or drilling. Simply replace your original shift knob, select the appropriate thread adapter (8mm, 10mm, or 12mm), and effortlessly affix your new shifter cover onto the knob rod. Transform your car, truck, or SUV with ease and elegance!
- ⭐RESILIENT CLEAR COATING - Our shift knobs boast a resilient clear coating, meticulously applied to defy fading and preserve grip integrity. This protective layer ensures a velvety-smooth handling experience, facilitating seamless gear changes with unrivaled ease. Keep your drive smooth, no matter the terrain!
- Model Name:For 2014 2014 2016 2017 Subaru Forester / 2012 2013 2014 2015 2016 Subaru Impreza / 2013 2014 2015 Subaru XV Crosstrek / 2016 2017 Subaru Crosstrek Automatic
- Material Type:Top quality of cowhide(full grain leather)
- Installation:Need to do a little easy hand sewing,comes with thread and needle.
- 😎 CUSTOM THREADED ADAPTER - We customize metal threaded adapters for you to choose from! Thread size of gear shift knobs includes M8x1.25, M10x1.25, M10x1.5, M12x1.25.
- 💪 DURABLE MATERIAL - Each shifter knob is made with a Grade A-3K Twill Carbon Fiber Grip & Black Aluminum Alloy Top/Bottom. Measuring 8.5cm (H) x 3.5cm (Top) x 2.5cm (Base), weighted 5 Oz. Our weighted shifter knobs will leave you impressed!
- 🌎 TRANSMISSION - Our stick shift knob is specifically designed for vehicles with a stick manual speed or buttonless automatic transmission shifters. Make shifting your automotive gear stick faster & easier!
- 🕹️ CUSTOM DESIGN - You care about your ride, and we do too. This is why we take the time to custom make our interior weighted shift knob. With a variety of colors to choose from, you are sure to find the right cool look and fit for your vehicle!
- ✅ EASY INSTALL: No mods or tool needed. Simply remove the original car shift knob, select the correct stainless steel threaded adapters & screw your new shifter cover onto the knob rod. Great for any sports car, pickup truck or SUV!
Last update on 2024-06-18 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
PART NUMBER: C1010FN000 TOOLS REQUIRED: INSTALLATION INSTRUCTIONS DESCRIPTION: STI CVT SHIFT KNOB PARTS IDENTIFICATION: PART NUMBER:C1010FN000 ISSUE00 2/1/2023 SUBARU OF AMERICA PAGE 1 / 4 STI CVT SHIFT KNOB Plastic Trim Removal Tool SHIFT KNOB PRE INSTALLED PIN CLIP NOTE : Shown separated for clarity STEP 2: Use plastic trim removal tool to pry and push down on the factory cover grip. PART NUMBER: C1010VC000 STEP 1: Park vehicle on level surface. Apply parking brake. Place vehicle in “P” Park. PART NUMBER:C1010VC000 ISSUE00 2/1/2023 SUBARU OF AMERICA PAGE 2 / 4 STEP 4: Check to make sure pre-installed pin clip is still installed on the STI CVT Shift Knob. NOTE: Place your finger over the pin clip. Carefully align and position shift knob and then push down until a click is heard. CAUTION: If your finger is not placed over the pin clip during the downward push, the pin clip may eject and get lost. If the pin clip comes loose, you can still install it by holding down the shift knob while inserting the pin clip towards the back of the vehicle until it engages. PART NUMBER: C1010VC000 STEP 3: From the front of the shift knob, use your fingernail to pull the pre-installed pin clip forward. Then remove the OE shift knob by lifting it upward. PART NUMBER:C1010VC000 ISSUE00 2/1/2023 SUBARU OF AMERICA PAGE 3 / 4 PRE PRE–INSTALLEDINSTALLED PIN CLIP PIN CLIP NOTE NOTE: : Shown separated Shown separated for clarity for clarity PART NUMBER:C1010VC000 ISSUE00 2/1/2023 SUBARU OF AMERICA PAGE 4 / 4 PART NUMBER: C1010VC000 STEP 5: While holding down shift knob, pull the cover grip upward until a click is heard. STEP 6: Depress brake pedal. Confirm that the shift knob is firmly installed and that the button can be fully depressed. Make sure the shift knob is properly installed before operating the vehicle. Turn on ignition, depress and hold brake pedal, confirm shift lever cannot shift out of “P” without depressing button. Confirm shift lever function by checking engagement into Reverse and MD modes.
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END
