Accessory Installation Guide
2024MY Impreza Fog Light Kit | H4510FN000 |
2024MY Crosstrek Fog Light Kit | H4510FN010 |
INSTALLATION INSTRUCTION
FOG LAMP KIT
IMPREZA (2023MY and after)
CROSSTREK (2023MY and after)
PART No.
H4510FN000 (IMPREZA)
H4510FN010 (CROSSTREK)
IMPORTANT
1. The installation should be carried out by an authorized Subaru dealer.
2. Pay special attention not to damage vehicle components when removing / installing them.
3. Route the wiring so that it cannot be abraded against any sharp edges.
4. Refer to the vehicle service manual.
5. Check that the vehicle’s electronic devices are operating normally. Be sure to make note of the contents of the memory of electronic devices such as the preprogrammed radio channels.
H4510FN000
https://static.oemdtc.com/AccessoryInstallationGuide/H4510FN000.pdf
H4510FN000
- 【COMPATIBILITY】Perfectly fit for Xterra Frontier Titan Sentra Pathfinder Leaf, and Subaru XV Forester Outback Crosstrek WRX STI BRZ Legacy. [Please check the fitment before your purchase to make sure you get the correct part.]
- 【PERFECT BEAM PATTERN】Designed with special point focus lens, ensure wider and further lighting area, without blinding the oncoming traffic, no glare to other drivers. Come with light regulator, adjust the lighting beam to the suitable height for your car.
- 【HIGH QUALITY LED CHIPS】Three times brighter than the stock lamps. Power: 15W/bulb, Voltage: 12/24V DC, Lumen: 1500LM/bulb, Color Temperature: 6000K. Safer for you to drive at night or in bad weather conditions.
- 【SOLID CONSTRUCTION】The fog lights are made of sturdy PC housing and lens. With excellent waterproof IP 67, prevent moisture and dust from getting inside the housing. Upgraded aluminum alloy heat sinks feature faster heat dissipation, extend the lifespan of lights.
- 【EASY INSTALLATION】SUPAREE led fog lights are designed as direct bolt-on replacement parts. H11 H9 H8 interface simply plug into your existing wiring without any cutting or drilling. Note: Adapter extension harness has been attached for wiring if the fog lights cannot be installed directly.
- Using most leading edge LED lens-point focus lens. Different from the traditional glass , the point focus lens uses a plastic injection molding process, so that the complex curved surface calculated by the computer can be formed. The point focus lens uses a hyperboloid design, which has higher optical efficiency and a wider light type, so that this type of lens can realize the fog lamp function and the auxiliary lighting function of the curve at the same time.
- This fog lamp is consistent for Nissan cars Subaru cars fog lamp mounting holes and bulb interface (H11 H9 H8) on the market, and it has strong versatility and is very convenient for upgrades and modifications.
- Siemid Autolights-Focus on the research and development and manufacturing of automotive lamps. The essence of the industry, leading the trend of the industry! We are committed to producing products that are assured and satisfactory for consumers. Welcome to choose.
- High quality, 1 year warranty. Packing: two packs
- In order to avoid mistake, please check its size and shape,the size is 90mm diameter (round shape).
- Compatible with 2015-2017 Subaru WRX/ WRX STi
- Powered by a full strip of dual-color white and amber LED for an even illuminating output on both sides of the assembly with carefully crafted bezels in glossy piano black finish
- Each kit comes with left/right LED DRL assembly and necessary wiring for installation (Comes with bezel only, no fog lamps are included)
- Converts your USDM WRX/WRX STi to the exact JDM style that is only found in Japan with additional turn signal feature!
- ✔Exact OEM Fit: Direct fitment for fog lights OEM lenses with no complex modifications. The fog lights are compatible for Subaru Forester 2009-2013/ Subaru Impreza WRX STI 2008-2010. The foglights were sold in a pair: include left side (driver side) and right side (passenger side).
- ✔Excellent Quality: Fully sealed, waterproof, dust and corrosion resistant made the fog lights perform well and prevent moisture and dust from getting inside the fog light housing.
- ✔Bright Illumination: The fog lights come with one pair of 9006 12V 51W light bulbs (the bulbs are already pre-installed in the fog lights), which allow you to see and be seen by oncoming drivers even through a thick fog.
- ✔Easy Installation: Plug & Play, easy to install. The fog lights are designed for quick and easy installation. Needn't for any modifications.
- ✔DOT/SAE Compliance: The fog lights own SAE compliance and DOT approval. Thoroughly tested to meet federal and international standards, the fog lamps are fully street legal.
- Compatible with Subaru 2013-2017 BRZ, 2014-2020 Forester, 2010-2014 Legacy, 2010-2012 Outback, 2015-2020 WRX/STI, 2012-2019 Impreza, 2013-2020 XV Crosstrek, replace OEM part # 89210094
- Includes (2) wide angle LED fog lamps made w/ heavy duty black powder coated cast aluminum and powered by 4 pieces of 6W high power XB-D LED diodes with a super bright 2880 lumen raw lighting output
- Features an SAE street legal 2500K selective yellow color wide angle flood beam lens
- Unlike the compatitor's brand, our LED lamps come with pre-installed mounting brackets and H11/H8 adapters so you can directly replace the OEM halogen fogs and convert them to LED with no modification required
- Compatible with 2010-up RDX, 2011-2014 TSX, 2012-2014 TL, 2013-2016 ILX, 2013-2015 CR-Z, 2010-2014 Insight, 2012-2015 Pilot, 2013-2015 Crosstour, 2015-up FIT, 2013-2015 Outlander Sport, 2005-2015 Frontier (w/ Metal bumper), 2005-2008, 2017-up Pathfinder, 2005-2013 Xterra, 2007-2012 Sentra SE-R, 2013-up FR-S, 2013-up BRZ, 2010-2012 Legacy, 2010-2012 Outback, 2015-2016 WRX/WRX STI, 2009-2013 Swift
- Compatible with 2014 Fiesta, 2005-2007 Freestyle, 2005-2014 Mustang (Excluding GT), 2008-2009 Taurus X, 2008-2014 Focus, 2011-2015 Explorer, 2013-2016 C-Max, 2013-2016 Fusion, 2005-2006 Lincoln LS, 2007-2015 Lincoln Navigator, 2004-2008 S-Type, 2004-2008 X-Type, 2009-2010 XK, 2011-2015 Porsche Cayenne, 2012-2015 FIAT 500 (Excluding ABARTH), etc
- DOT and SAE approval aftermarket OEM replacement fog light lamps (pair)
- Selective yellow glass fog lamps, come with a pair H11 halogen bulbs, good for repair, replacement or upgrade
- Replace many OEM part numbers such as 33900STKA11 AC2592111 4F9Z15200AA 3225-2050B XR837532 H451SAJ100 26154-EA500 84501AJ00A 990E0-65J36-000, etc
- Meets or Exceeds DOT & SAE Compliance Standards .
- COMPATIBLE VEHICLES - Fit for 2012-2019 Subaru Impreza , 2013-2016 Subaru BRZ , 2015-2020 Subaru WRX , 2010-2014 Subaru Legacy , 2014-2018 Subaru Forester , 2010-2012 Subaru Outback
- SUPER SEALING - High-quality closing technology can achieve Dust-proof, Anti-fog, and Waterproof .
- High-Quality Composition - Energy efficient 12V/55W H11 Halogen Bulbs , clear lens ; lamp body adopts OEM-grade Material . More penetrating in foggy days , suitable for night driving , for safer driving.
- ✔️ All of Our Items are 100% In Original Packaging! You Will Never Receive a Used Item From Us!
- ✔️ DOT and SAE Compliant. Made by an ISO Certified Manufacturer using Materials that meet or Exceed OEM Requirements!
- ✔️ Installation Made Easy on All of Our Items! Little to No Modifications needed at Best!
- ✔️ 30 Days Refund & 90 Days Defective Item Replacement Warranty! Any Issues With Your Item Please Call/Email Us and We Will Help You!
- ✔️ FITMENT: Compatible with Subaru Impreza 2008-2011 models. 2008-2011 Subaru Impreza WRX Base Model. 2010-2011 Subaru Impreza WRX Limited Model. 2009-2011 Subaru Impreza WRX Premium Model.
Last update on 2023-05-19 / Affiliate links / Images from Amazon Product Advertising API
This product was presentation was made with AAWP plugin.
SEOCONTENT-START
1 FOG LAMP KIT CROSSTREK (2023MY and after) INSTALLATION INSTRUCTION PART No. H4510FN000 (IMPREZA) IMPORTANT 1. The installation should be carried out by an authorized Subaru dealer. 2. Pay special attention not to damage vehicle components when removing / installing them. 3. Route the wiring so that it cannot be abraded against any sharp edges. 4. Refer to the vehicle service manual. 5. Check that the vehicle’s electronic devices are operating normally. Be sure to make note of the contents of the memory of electronic devices such as the preprogrammed radio channels. H4510FN010 (CROSSTREK) IMPREZA (2023MY and after) 2 Components ×2 Tools 10mm 10mm CROSSTREK Model IMPREZA Model CROSSTREK Model IMPREZA Model 3 After removing the battery terminal, wait 60 seconds before proceeding to the next procedure. 1 2 3 4 5 6 4 4 Rear of lower instrument panel shown. C23 C23(L):x6 C22 C22(W):x13 3 7 8 4 9 R01 R09 R01:x4 R09:x6 R01:x10 x6 CROSSTREK Model IMPREZA Model R33 R33 R33:x3 (A) (F) (E) (D) (C) (B) R33 While pushing up the lower side (A) of the bumper face front, release the engagement in the order from (B) to (F). Do not pull forcibly. It may damage the flange section on the bumper face front side when it comes off from the claws of the bumper bracket. 14 12 5 3m[10ft] Bulb center marking 45mm[1.77in] Height of fog light center Vehicle center Vehicle center 45mm[1.77in] Height of fog light center 10 5 7 6 8 Install the front bumper in the reverse order of removal. 13 R33 R33:x3 R33 R33 2 2 CROSSTREK Model IMPREZA Model 11
SEOCONTENT-END