“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10248187
Manufacturer Communication Number: 16-145-23
Summary
This bulletin announces availability of new reprogramming files for the Transmission Control Module (TCM) developed to address cases of DTC P2797 (Electrical/Auxiliary Transmission Fluid Pump “A” Performance/Stuck Off”).
NUMBER: 16-145-23
DATE: 12/04/23
APPLICABILITY: | 2023MY Legacy & Outback 2.4L |
SUBJECT: | DTC P2797 / Reprogramming Files |
INTRODUCTION:
This bulletin announces availability of new reprogramming files for the Transmission Control Module (TCM) developed to address cases of DTC P2797 (Electrical/Auxiliary Transmission Fluid Pump “A” Performance/Stuck Off”). A shock or surge can also be felt during engine restart when auto start-stop activates. This condition is caused by engine torque not being transferred correctly by the forward clutch system during engine restart resulting in a false detection of a transmission fluid pump failure. The new files contain enhanced logic optimizing forward clutch engagement. If DTC P2797 found, perform the reprogramming procedure outlined below.
PFC FILE APPLICABILITY:
Refer to the Information In PDF below…
SERVICE PROCEDURE / INFORMATION:
Refer to the Information In PDF below…
2 Affected Products
Vehicles
MAKE | MODEL | YEAR |
SUBARU | LEGACY | 2023 |
SUBARU | OUTBACK | 2023 |
1 Associated Document
Manufacturer Communications
NUMBER: 16-145-23
DATE: 12/04/23
https://www.nhtsa.gov/recalls?nhtsaId=10248187
MC-10248187-0001.pdf 275.404KB
Reprogramming
What J2534 reprogramming capabilities are available?
(4a) J2534 Reprogramming
Subaru reprogramming files using a generic (non-OEM) SAEJ2534 pass-thru vehicle programming device are available by contacting Service Technical Information Company toll free at 1-866-428-2278. The cost for the CD-ROM with all reprogramming files is $75.00 plus S/H and applicable state tax. Files will be updated four (4) times per year, in CD-ROM format, with all available reprogramming service information at the same above offered cost. Authorized Subaru Dealers are provided the same reprogramming information.
Before purchasing, the reprogramming details can be found in the following Reprogramming J-2534 Files chart. Click the link to view the PDF chart.
Subaru J2534 Reprogramming software meets the latest available J2534-1 specification. Our Reprogramming J2534 Files chart does not specify the Calibration Identification Number (CID); however, this information is included in our offered CD-Rom.
Note: The ECM or TCM being reprogrammed may already contain some or all of the reprogramming files listed in the Reprogramming J2534 Files chart shown by release date. It is possible to damage the vehicles ECM/TCMduring the reprogramming event. Once the reprogramming process has started, it is recommended not to interrupt the process until the event is completed. If you experience any problems, please contact your scan tool maker for further instructions.
(4b) Are all pre-2004MY Subaru vehicles compatible with J2534?
No. Subaru has no reprogramming capability for model years 1996-1998. Starting with our 1999 model year, please see our Reprogramming Pre-J2534 Files chart for affected model reprogramming information.
Both pre-J2534 reprogramming and J2534 pass thru reprogramming files are included in the offered HDS kit software for aftermarket service provider application.
- 【As a multi-protocol Pass-Thru vehicle interface】MaxiFlash Elite is a fully compliant SAE J2534-1 & SAE J2534-2 (March 2006) device. Specially designed to provide users with convenient PC communication and ECU reprogramming capabilities on any modern vehicle diagnostic bus, MaxiFlash Elite offers the most significant features desired by OEM customers: reliability, fast performance and flexibility.
- 【MaxiFlash Elite is an accessory tool for MK908P, MS908S Pro】Autel MaxiSys Elite to program ECUs on specific for BMW and for Benz vehicles, in case you lost the J-2534 programmer. ★★NOTE: J2534 CANNOT directly work with these single devices. After you received the J2534, you HAVE TO send us both the S/N(12 digits) of your tablet MS908S(etc.) and J2534. So, technically, Autel engineers can help you bind J2534 with your devices. The functions are NOT universally compatible. Please send VIN number to 🚘jmxd2022@outlook.com📧🚘 to check compatibility before your order. If need any supports, Please contact us.
- 【Wireless with advanced networking functions】Built-In Wireless with advanced networking functions and data storage. Fast performance ensures reprogramming even the newest controllers & Internet upgradable and updatable. Autel MaxiFlash Elite is compatiable with MaxiSYS MS908S, MaxiSYS MS908S Pro , MaxiSYS MS908CV, MaxiCOM MK908, MaxiCOM MK908 Pro, MaxiSYS Elite, MaxiSYS Elite II and Personal Computer
- 【SAE J2534-1 & J2534-2 Standards】Autel MaxiFlash Elite J2534 is a fully compliant SAE J2534-1 & SAE J2534-2 (March 2006) device, which performs standard PassThru J2534 functionality: Compatible with for Toyota Techstream, Volvo VIDA, Honda HDS, Jaguar-Land Rover IDS and BMW 3G for OEM diagnostics. Autel MaxiFlash J2534 is also specially designed to provide users with P-C communication and ECU reprogramming capabilities on any modern vehicle diagnostic bus, reliability and flexibility.
- 【Supports simultaneous communication Definition in J2534-1】Autel MaxiFlash Elite Reprogramming Device J2534 supports simultaneous communication definition in J2534-1, running 3 protocols at the same time, which greatly improves reprogramming and diagnostic speed. Embedded with the ARM9 Dual-core processor (clocked up to 500MHz), which further boosts the communicating speed.Rugged aluminum case with non-slip rubber end caps, capable of withstanding harsh environment.
- ALL OF THE J2534 PROTOCOLS - This single unit has all of the protocols you need for your OEM J2534 reprogramming and diagnostics including the latest in DoIP and CanFD
- J2534 TECHNICAL SUPPORT - FREE for the life of the tool. Staffed by technicians who understand vehicle repair and J2534 Pass‑thru
- TOOLBOX WITH OEM APPLICATION DESCRIPTIONS - educational video tutorials and real-time news – Giving you the confidence and up-to-date knowledge to get the job done
- J2534 v05.00 API - The newest version of J2534 to give you the latest in pass-thru technology
- FUTURE PROOF WITH 4 CAN CHANNELS - Going beyond the 3 required by select Chrysler/FCA models, CarDAQ-Plus 3 also provides a 4th to meet the needs of future OEM applications
- Industry-leading J2534 Pass-Thru Technology: Enabling diagnostics, reprogramming and security functions for dealerships and the independent repair facility. Economical and compact pass-thru devices provides an easy-to-use interface that allows you to repair complex vehicles with OE applications in your shop. Each type (see single branded types above) Mongoose-Plus is engineered to work with one of the following OEM's J2534 applications for Chrysler, Ford, GM, Nissan, Toyota, Subaru, & VW/Audi.
- Supports Current GM Vehicles: Now includes CAN-FD, DoIP (Diagnostics over Internet Protocol - as defined in J2534-2) and support for J2534 version 5.0. This is the tool that GM dealerships use for diagnostics and reprogramming.
- NEW Bluetooth Wireless Options Available: Providing wireless connectivity between your laptop and the Mongoose-Plus
- Expert Product Support: Staffed by technicians who understand vehicle repair and J2534 Pass‑Thru applications to help you with any technical setup questions
- Key Registration and Immobilizer Support: Using NASTF Vehicle Security Professional credentials
- Stay up-to-date with thelatest firmware and support of the SM2Pro J2534VCI ECUs programmer, ensuring reliable perform and optimalresults.
- The SM2Pro J2534VCI ECUs programmer is a trustedtool for professional technicians, offering comprehensive functionality and easy integration into your workflows.
- The SM2Pro J2534VCI ECUs programmer offersadvanced functionality for efficient and precise ECUs programming.
- With its 67IN1 without dongle & OBDcompatibility, the SM2Pro J2534VCI ECUs programmer provides a versatilesolution for read and write operations.
- Experienceseamless ECUs programming with the SM2Pro J2534VCI, designed to streamlines the read and write processes for enhanced efficiency.
- 【Autel MaxiFlash VCI】👉The MaxiFlash VCI is a bluetooth-enabled vehicle communication interface (VCI) and a J2534-1 and J2534-2 compliant pass-thru programming device. Compatible with the MaxiSYS MS909 advanced diagnostics tablet. The MaxiFlash VCI supports CAN FD, 4 CAN Channels, D-PDU, ISO22900-1 & ISO 22900-2 protocols and is RP1210 compliant.
- 【Programming Compatibility】👉The MaxiFlash VCI is a D-PDU, SAE J2534 & RP1210 compliant PassThru programming interface. Using the updated OEM software, it is capable of replacing the existing software/firmware in the Electronic Control Units (ECU), programming new ECUs, and fixing software-controlled drivability issues and emission issues.
- 【Communication Compatibility】👉The MaxiFlash VCI supports Bluetooth (BT), Wi-Fi, and USB communications. It can transmit vehicle data to the tablet with or without a cable connection. In open areas, the working range of the transmitter through Bluetooth communication is up to 328 feet (about 100 m). The working range of 5G Wi-Fi is up to 164 feet (50 m). If the signal is lost due to being taken out of range, communication will be restored once the tablet is within range.
- 👉The MaxiFlash VCI can be used with a Windows computer with applicable OE subscription for vehicle module programming and when connected to the MaxiSYS MS909 tablet for BMW and for Mercedes (compatible) vehicle module programming.
- 👉Includes One-Year Limited Warranty. This VCI Kit also includes an Autel Main Cable V2.0, USB 2.0 cable, and AC/DC adapter. 🚦If you have any other question, feel free to contact 📧 mbdh2022@outlook. com 📧
- 【Why Choose LAUNCH scanner X431 PRO5】It is the original LAUNCH X431 scan tool, the 2024 upgraded version of PROS V+, X431 PRO3 and V+ 4.0, which is a worthwhile investment for repair shops and mechanics. LAUNCH X431 PRO 5, all is set to OE-level standards with 1) J2534 ECU Programming & 50+ service same as PAD Series; 2) Bi-directional control + All system diagnostics as Snap-on scanner; 3) Online Coding functions directly connect to OEM server; 4) Top-notch Topology Mapping function
- 【J2534 Programming with Smart Box 3.0】 What is super SmartBox 3.0 VCI? Worth 1000$, Smart Box 3.0 is backed on new ISO9141/J1850/SAE J2610/CANFD/DOIP, which enables you to run 14x quicker data trans and advanced OEM J2534 reprogramming for B-MW, Ben-z, F-ord, Jaguar, Land Rover, GW, Volvo, etc. (please reach to us for more details). It also serves as a wireless VCI allowing the vehicle to transmit data to the diagnostic tablet without a physical connection.
- 【New Released Topology Mapping】Update your X431 PRO 5 to V 7.03.014 to gain Topology Mapping function. This advanced feature, typically found only on tools costing over $3000, provides a comprehensive view of a vehicle's data bus configurations, improving repair efficiency by up to 90%. With just one click, you can gain insights into the layout of a vehicle's system and clear any troubles. Compatibility with your vehicle's brand should be verified by checking the VIN before purchasing.
- 【LAUNCH X431 PRO 5 with Powerful 50+ Services】Especially designed for pro mechanics and big repair shops, Launch X431 scanner PRO5 is equipped with 50+ hot reset functions for 150 car makes which same as X431 PAD serious. Easy to navigate and help you do ABS Bleeding, TPMS Reset, Oil Reset, EPB Reset, Suspension, BMS, Injector Coding, IMMO, Power balance, Throttle Matching and more. 🚩Notice: we offer 2-year f ree update while other brands generally 1 year.
- 【A-ctive Test + ECU Coding】Come with appealing bi-directional control to troubleshoot all possible problems for full systems within 5 min.This LAUNCH X431 PRO scanner even develops all practical functions needed by all technicians:1) ECU Coding for replacing, match, relearn, recode new ECU modules;2) Online Coding for B-MW, VW, Porsche, Ben-z to surf OEM data;3) VAG Guided functions ease complex issues;4) Personalization & ADAS improving car performance and driving safety.
Last update on 2024-06-16 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
Bulletin Number: 16-145-23; Date: 12/04/23 Page 1 of 3
SERVICE BULLETIN
Continued…
CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD
RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS.
Subaru Service Bulletins are intended for use by professional technicians ONLY. They
are written to inform those technicians of conditions that may occur in some vehicles,
or to provide information that could assist in the proper servicing of the vehicle. Properly
trained technicians have the equipment, tools, safety instructions, and know-how to
do the job correctly and safely. If a condition is described, DO NOT assume that this
Service Bulletin applies to your vehicle, or that your vehicle will have that condition.
Subaru of America, Inc. is
ISO 14001 Compliant
ISO 14001 is the international standard for
excellence in Environmental Management
Systems. Please recycle or dispose of
automotive products in a manner that is friendly
to our environment and in accordance with all
local, state and federal laws and regulations.
NUMBER: 16-145-23
DATE: 12/04/23
APPLICABILITY: 2023MY Legacy & Outback 2.4L
SUBJECT: DTC P2797 / Reprogramming Files
INTRODUCTION:
This bulletin announces availability of new reprogramming files for the Transmission Control
Module (TCM) developed to address cases of DTC P2797 (Electrical/Auxiliary Transmission Fluid
Pump “A” Performance/Stuck Off”). A shock or surge can also be felt during engine restart when
auto start-stop activates. This condition is caused by engine torque not being transferred correctly by
the forward clutch system during engine restart resulting in a false detection of a transmission fluid
pump failure. The new files contain enhanced logic optimizing forward clutch engagement. If DTC
P2797 found, perform the reprogramming procedure outlined below.
PFC FILE APPLICABILITY:
MY Model File Description Specification Old Part # New CID #
2023
Legacy 30919AJ70B.pfc
2.4L Turbo,
CVT
30919AJ70A Z1FEC63100L
Outback 30919AJ71B.pfc
2.4L Turbo,
CVT
30919AJ71A Z1FEF63100L
Outback Wilderness 30919AJ72B.pfc
2.4L Turbo,
CVT
30919AJ72A Z18EF63100L
NOTE: There is no need to perform CVT Learning after reprogramming.
ATTENTION:
GENERAL MANAGER q
PARTS MANAGER q
CLAIMS PERSONNEL q
SERVICE MANAGER q
IMPORTANT – All
Service Personnel
Should Read and
Initial in the boxes
provided, right.
©2023 Subaru of America, Inc. All rights reserved.
Bulletin Number: 16-145-23; Date: 12/04/23 Page 2 of 3
Continued…
SERVICE PROCEDURE / INFORMATION:
REMINDER: Customer satisfaction and retention starts with performing quality repairs.
• Reprogram the TCM following the normal SSM5-R procedure.
• Detailed information regarding the SSM5-R reprograming procedures can be found in TSB
14-28-21R.
REMINDER: Customer satisfaction and retention starts with performing quality repairs.
Subaru of America, Inc. (SOA) highly recommends utilizing either the Subaru Midtronics DCA8000
Dynamic Diagnostic Charging System or the Subaru Midtronics GR8-1100 Diagnostic Battery
Charger to the vehicle and utilizing the Power Supply Mode feature anytime a vehicle control module
is being reprogrammed. Once the Midtronics charger is connected to the vehicle, if the battery is fully
charged, it takes less than three (3) minutes to boot-up the charger, select the Power Supply Mode,
and have the battery voltage stabilized and ready for reprogramming.
NOTES:
• For instructions on using the Power Supply Mode, reference the applicable User Manual for
the Midtronics DCA-8000 Dynamic Diagnostic Charging System and the Midtronics GR8-
1100 Diagnostic Battery Charger on STIS.
• Confirm all electrical loads such as lights, audio, HVAC, seat heaters, and rear defroster are all
switched OFF before setting up the charger for Power Supply Mode.
• Select the correct battery type (Enhanced Flooded, Flooded, Gel, AGM or AGM Spiral).
• Input the CCA which matches the vehicle’s battery. NOTE: OE and replacement batteries have
different CCA ratings. Always confirm the battery’s CCA rating before proceeding.
• If using a DCA-8000 Dynamic Diagnostic Charging System, set the power supply voltage to
13.5 Volts.
• DO NOT connect the DST-i or DST-010 until the Power Supply mode function has completed
its battery test mode and the Charging Voltage has dropped to and shows a steady 13.5 Volts on
the display.
• Once Power Supply Mode reaches a steady 13.5 Volts, connect the DST-i or DST-010 to the
OBD connector and proceed with initiating the normal SSM5-R reprogramming process.
• Amperage will fluctuate based upon the vehicle’s demand for power. NOTE: If the voltage
rises beyond 14 Volts while programming is in process, the procedure will abort. This can
indicate a need to test or charge the vehicle battery before any further attempt at programming
is made.
• ALWAYS set the power supply voltage to 13.5 Volts when using Power Supply Mode. NEVER
turn the ignition switch on when charging at voltages 15 Volts or higher.
REMINDER: If the DCA-8000 or GR8-1100 indicates the vehicle’s battery must be charged, charge
the battery fully before proceeding to reprogram the vehicle while using the Power Supply Mode.
Bulletin Number: 16-145-23; Date: 12/04/23 Page 3 of 3
NOTE: Control module failures resulting from battery discharge during reprogramming are not a
matter for warranty. Should any DTCs reset after the reprogramming update is performed, diagnose
per the procedure outlined in the applicable Service Manual.
WARRANTY / CLAIM INFORMATION:
For vehicles within the Basic New Car Limited or Powertrain Limited Warranty period or covered by
an active Subaru Added Security Powertrain, Classic or Gold plan, this repair may be submitted using
the following claim information:
Labor Description Labor Operation # Fail Code Labor Time
TCM
Reprogramming
A860-737 MJZ-48 0.5
IMPORTANT: Always note the original Calibration Identification number (CID) / ROMID the
vehicle came in with on the repair order before reprogramming and, make sure to list the NEW CID /
ROMID for any newly installed programming (as confirmed from the actual control module AFTER
installation). The NEW CID / ROMID MUST also be noted on the repair order as this information is
required for entry in the Miscellaneous Detail field during claim submission. These numbers can be
read using SSM5-R.
NOTE: The pfc file listings provided in this bulletin are the latest available at the time of publishing.
Updates are often released thereafter without revision to the original bulletin. For this reason, it
is critical to always have the latest version of Select Monitor software installed on your system.
Technicians can confirm if a later version is available by entering the CID listed in this bulletin into
SSM5-R. If a newer CID is shown as available in SSM5-R, reprogram using that file.
IMPORTANT REMINDERS:
• SOA strongly discourages the printing and/or local storage of service information as previously
released information and electronic publications may be updated at any time.
• Always check for any open recalls or campaigns anytime a vehicle is in for servicing.
• Always refer to STIS for the latest service information before performing any repairs.
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END