“This site contains affiliate links for which OEMDTC may be compensated” |
Owner Manual
2019MY SUBARU STARLINK Safety and Security Owner’s Manual
MSA5M1921A
Table of Contents
Foreword
Welcome to SUBARU STARLINK – 4
Introduction
The SUBARU STARLINK Experience – 5
SUBARU STARLINK Enrollment
How to Enroll – 6
SUBARU STARLINK – 7
STARLINK Safety Plus – 7
STARLINK Security Plus – 7
STARLINK Concierge – 7
WiFi Hotspot – 7
SUBARU STARLINK Features List – 8
Getting Started is Easy
Accessing SUBARU STARLINK Features – 9
MySubaru
Making Ownership Easy – 10
Setting or changing your PIN – 11
SUBARU STARLINK Features
STARLINK Safety Plus
Advanced Automatic Collision Notification – 12
SOS Emergency Service – 13
Enhanced Roadside Assistance – 14
24-Hour Roadside Assistance – 15
Diagnostic Alerts – 16
Vehicle Health – 16
Maintenance Notifications – 16
Service Appointment Scheduler – 17
STARLINK Security Plus
Stolen Vehicle Recovery Plus – 18
Stolen Vehicle Immobilizer – 18
Vehicle Security Alarm Notification – 19
Remote Services – 20
Remote Engine Start with Climate Control – 20
Remote Door Lock & Unlock – 22
Remote Horn & Lights – 23
Remote Vehicle Locator – 24
Vehicle Alerts – 25
Boundary Alert – 25
Speed Alert – 26
Curfew Alert – 27
STARLINK Concierge
We’re Here to Help – 28
Destination to Vehicle – 29
WiFi Hotspot – 30
SUBARU STARLINK System Update – 31
Index – 32
Troubleshooting – 33
Communication Error Codes – 34
FAQs – 35
MSA5M1921A
- [Pro OBD2 Scanner] - BlueDriver is the easiest way to scan and understand your vehicle like a professional mechanic. Read and clear your car’s trouble codes and check engine light.
- [Read & Clear All The Codes] - BlueDriver's enhanced vehicle diagnostics gives you access to information normally available only to mechanics on their OBD2 scan tools. Now you can read and clear ABS, Airbag, SRS, TPMS codes, and many more.
- [Get The Right Fix & View Live Data] - Much more than a car code reader, BlueDriver is a diagnostic tool. You’ll get unlimited repair reports with possible causes and fixes, plus real-time health monitoring while you drive with the live data feature.
- [Wireless & Bluetooth Enabled] - Say goodbye to wires. BlueDriver connects with Bluetooth via your phone/tablet to a sensor that plugs into your car's OBDII port. Get all of the capabilities of an expensive code reader & scan tool without any annoying wires.
- [User-Friendly App and Repair Videos] - BlueDriver gives you more ways to scan and fix your vehicle. Our iOS & Android app connects you to a large database of repair videos with step-by-step directions of repairs.
- [Easy to Use--Work out of box] + [FOXWELL 2025 New Version] FOXWELL NT604 Elite scan tool is the 2025 new version from FOXWELL, which is designed for those car owners who want to figure out the cause issue before fixing the car problem via scanning the most common systems like abs srs engine and transmission.The NT604 Elite diagnostic tool comes with latest software, which can be used out of box. No need to waste time to download the software first.
- [Affordable] + [Reliable Car Health Monitor] Will you be confused what happen when the warning light of abs/srs/transmission/check engine flashes? Instead of taking your cars to dealership, this foxwell scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. It will t-urn off the warning light car after the problem is fixed.👉TIPS: Airbag crash/collision data can NOT be cleared even you replace the new airbag.
- [5 in 1 Diagnostic Scanner] Compared with those auto scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also it can be an abs/srs scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it. Note: doesn't support maintenance function.
- [Fantastic AUTOVIN] + [No extra software fee] Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite abs srs scanner supports 60+ car makes from worldwide (America/Asia/Europe). You don’t need to pay extra software fee.
- [Solid protective case KO plastic carrying bag] + [Lifetime update] Almost all same price-level obd scanner diagnostic tool only offers plastic bag to hold on the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
- [Transform Your Car Care Experience] - With BLCKTEC, instantly become your own professional mechanic. Effortlessly read and clear your car’s trouble codes and check engine light, ensuring your vehicle stays in top condition.
- [Empower Yourself with Comprehensive Diagnostics] - Unlock the full potential of your vehicle with the BLCKTEC 430. Access detailed diagnostics previously exclusive to professional mechanics’ OBD2 scan tools, including ABS, Airbag, SRS, TPMS codes, and beyond, right at your fingertips.
- [Drive with Confidence] - The BLCKTEC 430 is more than just a car code reader; it's your personal vehicle health advisor. Receive tailored repair reports with potential causes and verified solutions for your specific make and model, guiding you to the right fix every time.
- [Seamless Connectivity, Ultimate Convenience] - Experience the freedom of wireless diagnostics with this portable car scanner. Easily connect via Bluetooth to our intuitive sensor and enjoy all the functionalities of high-end scan tools without the clutter of wires, directly from your smartphone or tablet. To connect the tool to the App, please DO NOT go to device's Bluetooth settings, instead, open RepairSolutions2 App and follow the instructions on the App to pair the BLCKTEC 430.
- [DIY Repairs Made Easy] - Navigate car maintenance with ease using our premium app. Access a vast library of easy-to-follow repair videos, guiding you through each step of the repair process, compatible with both iOS & Android devices.
- Pro-level ABS SRS OBD2 Scanner - Based on the NT301 FOXWELL Scanner, this car scanner takes OBD-II diagnostics to the next level by in-depth insights on reading ABS SRS Diagnostic Trouble Codes, display the Live Data: Wheel Speed Sensor, Airbag Issues, Wiring Faults, clear the ABS error codes after the car faults repaired, etc... NOTE: This code reader can only read SRS codes but CANNOT reset any Airbag crash codes. Please check the functions coverage BEFORE purchasing. NO Need to Register &Subscription.
- Full-Feature ABS Diagnostics - Real-time tracking of wheel speed sensor, brake force distribution, and brake pressure with dynamic graphs for easy analysis. Effortlessly read ABS trouble codes and access freeze frame data to identify and resolve system issues. This ABS scanner diagnostic tool also monitors ABS performance during emergency braking or on slippery surfaces, providing alerts for potential problems.
- Basic OBDII Scanner Functions - This obd2 scanner diagnostic tool also can Check Engine Fault Light, diagnose OBD-II modules instantly, display the Live Data with graph (engine RPM, coolant temperature, fuel trim, and sensor readings), locate bad sensors and indicate I/M readiness status before the annual inspection. Reducing the potential driving risk and keep a peak performance on the road.
- Top ABS Bleed Scan Tool - After replacing the ABS pump or adding brake fluid, air can enter the ABS module, causing the pedal to feel weak or slow to return. This OBD2 scanner with ABS auto bleed will restore your brake pedal’s firmness by efficiently removing air from the ABS module. For vehicle coverage, check the FOXWELL Diagnostic Coverage List under Support on the official site. NOTE: This feature is NOT compatible with vehicles that support manual bleed.
- User-Friendly & Budget-Friendly - Enjoy software updates without subscription for newer vehicle models(Any more issues about update, please let us know). This car code reader comes with a sturdy case for easy carrying. The code reader for cars will also save diagnostic data to avoid unnecessary diagnostic costs when you must to find the professional mechanic to fix the car faults instead of addressing them by yourself.
- [ABS Diagnosis] - Quickly identify and resolve ABS-related issues, including sensor faults (such as wheel speed sensors), wiring problems (faulty circuits or connectors within the ABS system), or ABS pump failures (malfunctions in the ECU controlling the ABS). Ensure proper system operation, restore optimal braking performance, and clear any warning lights.
- [SRS Diagnosis] - Quickly detect the airbag ECU itself, airbag sensor failure, airbag system plug disconnection or poor contact, seat belt sensor failure, or system error, etc, to ensure that the SRS (Supplemental Restraint system) is working properly. After repair, reset the system to clear the warning light and restore full safety performance. NOTE: It cannot reset Airbag crash or transmission codes.
- [Full OBD2 Function] - Read and clear trouble codes for all OBD2 systems, including show real-time data, freeze frame data, I/M Readiness, DTC lookup, test results for o-xygen sensor, On-board monitor test, request vehicle information, component test, modules present and e-vap test. Allowing you to quickly identify and troubleshoot vehicle issues.
- [AutoVIN Technology] - It simplifies diagnostics by automatically identifying the vehicle’s model and configuration, eliminating the need for manual input, and ensures accurate diagnostics by applying the correct data and algorithms, reducing errors caused by manual entry. Improves efficiency and streamlines the diagnostic process.
- [ABS Auto Bleeding] - Helps bleed your vehicle's Anti-lock Braking System (ABS), removing air from the brake lines to ensure optimal brake performance. It helps prevent brake issues such as spongy pedals, inconsistent braking, and reduced stopping power, and enhances vehicle safety by ensuring the ABS system is working properly, especially during critical driving situations. NOTE: It’s not compatible with vehicles that only support manual bleeding.
- [Brand-New ArtiDiag500] We've got everything you're looking for! Forget basic OBD2 scanners; TOPDON's ArtiDiag500 car scanner offers more. The all-new ArtiDiag500 not only includes full OBD2 functions and 4-system diagnostics but also provides DIYers with 6 maintenance services. The brand-new, cost effective AD500 is back in full swing!
- [4-System Diagnostics] DIY enthusiasts, take notice! Will these 4-system diagnostics be the treasure you've been seeking? The ArtiDiag500 code reader offers in-depth testing for the engine, transmission, ABS, and SRS systems, reading fault codes and data streams. It also visualizes real-time data in chart form, simplifying complex data for storage and future playback, aiding DIY users in problem detection.
- [6 Reset Functions] Hey, hang tight for a moment. With these 6 reset functions, the ArtiDiag500 has got you covered. It offers throttle adaptation along with reset capabilities for Oil, SAS, TPMS, BMS, and EPB. Seamlessly aligning the throttle, battery, tires, and brake pads with your vehicle, it also adjusts the steering angle and turns off the oil light. Looking to restore your car to its original condition? Look no further than the ArtiDiag500.
- [Multiple Functions] The Smart AutoVIN of this TOPDON OBD2 scanner keeps track of your manual selections for vehicle make, model, and year and directs you to the suitable diagnostics. Max 4 Live Data streams integrated for much easier data processing. Diagnostic feedback online with this diagnostic tool to help you get tough repair operations well-completed. Real-time car battery voltage monitoring identifies probable vehicle defects.
- [Global Support] Rest assured about compatibility with your vehicle and language – ArtiDiag500 currently supports 67+ car brands, 10,000+ models, covering most vehicles worldwide, and is available in 12 languages. Whether it's for your car or preferred language, there's an ideal choice for you. Plus, it's fully compatible with Android 11 for smoother use.
- Comprehensive OBD2 Scanner with 15 Resets: The XTOOL D5S car code reader and vehicle reset tool provides an advanced diagnostic solution with 15 high demand reset functions, including Electronic Parking Brake Reset (EPB), SAS, BMS Reset, Throttle Body Relearn, TPMS Reset, ABS Bleeding, Injector Coding, Gearbox Match, Suspension Adjustment, Headlight, Window Initialization, Crank Sensor Relearn and more. Equipped with CAN FD Protocol and FAC AutoAuth, the D5S obdii scanner diagnostic tool ensures compatibility with a broad range of modern vehicles, allowing users to address common maintenance needs quickly.
- 4 Main System Car Diagnostic Scanner & Full OBD2 Diagnostics: The XTOOL D5S vehicle code reader is ideal for home mechanics, DIYers, and professionals, providing access to Transmission/Engine/ABS/SRS to read dtcs, and live data can be displayed in text or up to 4 pid data graphs, along with full OBD2 diagnostics to check the engine light on, other obd2 issues and routine maintenance. This scan tool ensures you can keep your vehicles in top condition, avoiding costly repairs or unexpected breakdowns. NOTE: Some vehicles display three systems after connection because the transmission and engine of some vehicles are integrated into one
- One-Tap W!Fi Updates + No Software Fees: Enjoy a 5.45” high-resolution touchscreen (1440x720) that’s easy to read, even in low light. Free lifetime software updates over Wi-Fi keep your D5S OBD2 Scanner Diagnostic Tool updated with the latest features—no hidden fees. Ample 32GB storage plus expandable memory ensures room for all your diagnostic data, while durable silicone grips provide comfortable, secure handling. This makes D5S a cost-effective, long-term investment for continuous diagnostic support, a reli~able automotive scanner diagnostic tool for your family
- Wide Compatibility Across 90+ Vehicle Brands: The XTOOL D5S Scanner for cars and trucks works with OBDII-equipped vehicles built after 1996, covering over 90 vehicle brands, including 12V diesel and SUVs, minivans, and light-duty trucks. It supports most of protocols include CAN FD for broad compatibility. For vehicle-specific compatibility, send us your vehicle information to check the compatibility before purchase
- Super Clear Navigation Display: The XTOOL D5S car scanner enhances your diagnostic workflow with a super clear navigation display, designed for convenience and speed. TOP Capability include a Voltage Display for real-time monitoring of your vehicle’s electrical system, a “My Vehicle” Menu for adding and managing vehicle information, and Quick Button Interfaces for both Auto Scan and OBD2 Diagnostics, ensuring you can quickly access the menu you need. These features streamline the diagnostic process, allowing you to focus on what matters most—Efficient vehicle maintenance
- 2025 FOXWELL Scanner NT716: New Bidirectional Scan Tool – Get active test capabilities for ABS, Airbag, Transmission, and Engine systems, easily perform various tests such as injectors, Cooling Fan, Fuel Pump, etc.The price of $ 200+ enjoys a $ 300-500 code reader service! With the NT716 Scanner Diagnostic Tool, You only need to plug in the device to accurately obtain real -time data information. To understand whether your car's system actuator is normal, prevent danger in advance, and drive with confidence. 👉P.S. The active test function needs to be upgraded before it can be used.
- 4-System Car Scanner for ABS, Airbag, Transmission, and Engine – Easily read error codes and ECU information, view 4-in-1 live data, and save or download data for later reference. The built-in DTC library explains fault codes clearly, and once issues are fixed, you can clear codes and turn off warning lights with just one tap. FOXWELL NT716 Code Scanner empowers you to handle most diagnostics on your own, saving you time and money instead of relying on an elusive mechanic.
- 9 Reset Functions – Unlike other obd2 scanner diagnostic tools in this price range that offer only 5–7 resets, FOXWELL NT716 scan tool supports 9 essential reset functions, including ABS Bleeding, SAS, Oil Light, EPB, BMS, DPF, Throttle Relearn, Injector Coding, and TPMS. You can monitor the running status of various systems of the car by live data flow, identify potential problems, reset system data, and extinguish the flashing oil lamp fault light! ❗Notice:This product does NOT have special functions for car k-ey p-rogramming.
- Full OBD2 Scanner with Plug-and-Play – Enjoy comprehensive OBDii functions, including AutoVIN for automatic vehicle info recognition, one-click I/M Readiness for emissions checks, real-time data, and freeze frame capture… Scanner FOXWELL NT716 makes it easy to prepare for annual inspections, helping you stay road-ready with confidence each year.
- 5.5" HD Touchscreen Tablet Diagnostic Scanner– Get rid of the confusion caused by the 2.8" scanner with multi - button operation; Built -in 4000mAh battery, the new version of the battery life is greatly enhanced; No subscription fee, no additional charges, share reports anytime, one - click free WiFi upgrade; Android 9.0 system, 24+language , support 100+ car brands from 1996 to 2025.
- 🎉【2025 Upgraded Ver. of AL519/ ML519/ ML619】Autel develops the brand-new AutoLink AL619 as the advanced ver. of Autel ML519, AL519, AL319, MS309. This AL619 OBD2 scanner can scan ABS & SRS systems, and support 10 Modes of OBD II Diagnostics Function on Worldwide Vehicles to read, erase codes and turn off the MIL, ABS, SRS warning lights so that you can better maintain your car when related malfunctions occur and make your vehicle ready for the annual test.🚦📢Kindly note: AL619 only supports 2015 or pre-2015 cars. And services are not universal, please send us your car VIN# to check the compatibility before ordering.📩AutelStoreOnline @ outlook . com📩.
- 🎉【Accurate ABS/ SRS Diagnostics Functions】The ABS/ SRS diagnostic function is used to retrieve and clear codes from the ABS/ SRS systems. It can read and clear DTCs, show definitions of each code, display live data of multiple sensors in the graph to locate fault causes, and assist home mechanics to do the proper repair and clear ABS & Airbag warning lights. Diagnoses ABS/ SRS system codes on most 1996 and newer major vehicle models. Please email 📩 AutelStoreOnline @ outlook . com 📩 for help.
- 🎉【All 10 Modes of OBD II Diagnostics Function】The OBD II Diagnostics function is a fast-access option that allows you to carry out a quick test on the engine system of OBD II vehicles. Read Codes, Erase Codes, Live Data, Freeze Frame, Retrieving I/M Readiness Status, O2 Monitor Test, On-Board Monitor Test, DTC Lookup, Component Test, Viewing Vehicle Information, Modules Present.
- 🎉【Live Data and Freeze Frame Data】With Live Data functions, Autel AL619 OBD2 diagnostic code reader allows you to view the live PID (Parameter Identification Data) of the vehicle's computer module(s) in text, graph to check the status of various sensors. And Freeze Frame Data enables you to view the vehicle's operating parameters at the moment a DTC is detected. These information will aid the technician by allowing the parameters to be duplicated for diagnostic and repair purposes.
- 🎉【DTC Lookup Feature】Besides showing you the code’s definition while you are reading the diagnostic trouble codes, AL619 features comparably user-friendly DTC Lookup Function which enables you to retrieve the definitions of any error codes from the large database of AL619, saving you from the hassle of wasting time searching definition of every code via Google.
- 【UPGRADE OF NT604-POWERFUL 5 RESETS】Wanna to do maintenance service for your car however the basic 4 system scanner tool can't do it? Then FOXWELL NT614 Elite-the upgraded version of nt604, was born for providing you with 5 special functions-ABS Bleeding/Oil Reset/SAS Calibration/EPB Reset/Throttle Reset. These functions are enough for your daily needs. No need to buy those 300-600 dollors obd2 scanner. Saving your unnecessary repair fee with FOXWELL nt614 car scanner diagnostic tool!
- 【ENGINE/ABS/SRS/TRANSMISSION CODE READER】Don't know what's wrong with your car when the warning light of ABS, transmission, SRS, Engine flashes? NT614 Elite obd2 scanner can pinpoint the problem components. It boasts many functions of engine, abs, srs and transmission such as read & erase fault codes and grapgh live data like engine temp, wheel speed sensor, read transmission temperature, etc. Compared with car repairs, using foxwell nt614 elite is more convenient and a-ffordable.
- 【Best Bang For Your Buck!-FOXWELL NT614 Elite】1. 2025 New software-faster than old one. 2. One click lifetime WIFI f-ree update, no need to use the annoying Micro SD card. 3. New Update-No need to register on the FOXWELL website before use, more convenient! 4. More intuitive viewing with new interface, you can find I/M, Battery Test, DTC Lookup directly.
- 【ABS BLEEDING OBD SCANNER】Do you always feel the brake pedal was slowly sinking to floor or it's loose after doing a complete front & rear brake job? And then you need to take more time than normal to stop your car, which is very dangerous. That's because when you open the brake system to replace components, air gets inside. To get a firm brake pedal, the air need to be removed by bleeding the brakes. NT614 Elite odb2 scanner can do ABS BLEEDING perfectly for your cars.
- 【SMART AUTOVIN & LIFETIME F-REE WIFI UPDATE & PERFECT GIFT CHOICE】With the fantastic AUTOVIN function, this nt614 scan tool can get your VIN and vehicle info rapidly. No need to spend much time in finding your VIN and input it one by one. Also, the lifetime f-ree wifi update is provided for more vehicle coverage, bug fixes, newly added parameters. SAVE AT LEAST 1000+ PER YEAR. And this automotive scanner is a best gift for your Dad, Husband, Boyfriend and Handy Men.
SEOCONTENT-START
Foreword Welcome to SUBARU STARLINK.4 Introduction The SUBARU STARLINK Experience .5 SUBARU STARLINK Enrollment How to Enroll6 SUBARU STARLINK.7 STARLINK Safety Plus.7 STARLINK Security Plus7 STARLINK Concierge7 WiFi Hotspot7 SUBARU STARLINK Features List.8 Getting Started is Easy Accessing SUBARU STARLINK Features 9 MySubaru Making Ownership Easy.10 Setting or changing your PIN 11 SUBARU STARLINK Features STARLINK Safety Plus Advanced Automatic Collision Notification12 SOS Emergency Service13 Enhanced Roadside Assistance.14 24-Hour Roadside Assistance15 Diagnostic Alerts.16 Vehicle Health.16 Maintenance Notifications16 Service Appointment Scheduler.17 STARLINK Security Plus Stolen Vehicle Recovery Plus.18 Stolen Vehicle Immobilizer18 Vehicle Security Alarm Notification.19 Remote Services20 Remote Engine Start with Climate Control20 Remote Door Lock & Unlock22 Remote Horn & Lights.23 Remote Vehicle Locator.24 Continued. Table of Contents Vehicle Alerts25 Boundary Alert.25 Speed Alert26 Curfew Alert.27 STARLINK Concierge We’re Here to Help28 Destination to Vehicle.29 WiFi Hotspot30 SUBARU STARLINK System Update.31 Index .32 Troubleshooting33 Communication Error Codes34 FAQs .35 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 4 Foreword Welcome to SUBARU STARLINK For over 50 years, Subaru has been designing vehicles to help protect you and your passengers. Building on our long history of engineering safe vehicles, we are pleased to bring you SUBARU STARLINK vehicle technology, that provides additional security and peace of mind you’ve come to expect from Subaru. SUBARU STARLINK is a technology feature that allows you to stay connected to your Subaru vehicle and receive important information to help keep you and your vehicle safe. SUBARU STARLINK uses the nationwide 4G LTE cellular network (where available). This technology is completely separate from your smartphone device and uses automatic roaming, optimizes connections and prioritizes emergency requests. Housed inside your vehicle, SUBARU STARLINK uses voice-response technology with the addition of a live assistance team for features such as Advanced Automatic Collision Notification (AACN), SOS Emergency Assistance, Enhanced Roadside Assistance and Concierge Service. With SUBARU STARLINK features, you are able to: • Receive automatic emergency assistance in the event of a collision • Receive assistance in the event your vehicle is stolen • Remotely access vehicle features • Monitor the status of your vehicle’s health In addition, SUBARU STARLINK can keep you informed and up-to-date on your vehicle’s status via email, text messaging or push notifications. Use your MySubaru account to access SUBARU STARLINK features and alerts. In order to do this, you will need to complete the enrollment details and set your preferences for SUBARU STARLINK. You can enroll via MySubaru.com (Refer to “How to Enroll – page 6”). Enrollment might have occurred at your Retailer, so be sure to look for a confirmation email with your temporary password before creating a new account. MySubaru also provides you access to a wealth of safety and remote features such as Remote Lock & Unlock, Remote Engine Start, Remote Vehicle Locator and many more. SUBARU STARLINK service is only available in the Continental U.S., Alaska, Hawaii, the District of Columbia and Canada. For complete details applicable to your SUBARU STARLINK subscription, please refer to the SUBARU STARLINK Service Agreement Terms and Conditions. NOTE Foreword 5 Introduction With the SUBARU STARLINK system integrated into your vehicle, advanced safety and security technology is just a button press away. The SUBARU STARLINK experience includes in-vehicle call center support, maintenance and diagnostic alerts as well as remote services that keep you connected to your Subaru vehicle. This Owner’s Manual will help to familiarize you with the features of SUBARU STARLINK. Located in the overhead console of your vehicle are the red SOS and blue i-button . Both buttons link you to the SUBARU STARLINK call centers that are there to support you 24 hours a day, 7 days a week. The SOS button is for SOS Emergency Assistance. The i-button is for Enhanced Roadside Assistance or Concierge (if subscribed). • Press the SOS button for SOS Emergency Assistance* (Refer to “Using SOS Emergency Assistance – page 15) • Press the i-button for Enhanced Roadside Assistance* or Concierge* (if subscribed).* (Refer to “Enhanced Roadside Assistance – page 14 or STARLINK Concierge – page 28”) • To cancel a SOS Emergency Assistance, Enhanced Roadside Assistance or a Concierge call, press and hold the same button for approximately 2 seconds or select the “End Call” button displayed on the head unit * In order to utilize these services, you must be an active STARLINK subscriber. Overhead console with EyeSight® Overhead console without EyeSight® If you subscribed to SUBARU STARLINK’s Concierge services, an option screen will display on the head unit when the i-button is pressed. From the option screen you can select either Enhanced Roadside Assistance or Concierge Services. If you do not choose a service then Roadside Assistance will automatically be called in approximately 10 sec. NOTE Introduction The SUBARU STARLINK Experience 6 SUBARU STARLINK Enrollment You can enroll in SUBARU STARLINK online at the MySubaru website (MySubaru.com), the MySubaru Mobile App, at your retailer or by calling the STARLINK call center at 1-855-753-2495. MySubaru is the Subaru owner website that allows you vehicle access to remote services, user preferences, diagnostic alerts and other useful features enabled by your STARLINK Safety Plus, STARLINK Security Plus and STARLINK Concierge subscription. To enroll in SUBARU STARLINK, you first need to create or update your MySubaru account. MySubaru is the owners portal for all things about your Subaru vehicle. To create an account please visit MySubaru.com. Please have your Vehicle Identification Number (VIN) available, as you will need it to complete this step. After the enrollment process, you will learn more about the features in detail at MySubaru.com. NOTE SUBARU STARLINK Enrollment How to Enroll 7 SUBARU STARLINK With SUBARU STARLINK you are given the freedom to choose a package with the features that you want. To see the current plans and package details please visit the MySubaru website (MySubaru.com) or MySubaru Mobile App. • STARLINK Safety Plus – Choosing Safety Plus includes our call center support features: Advanced Automatic Collision Notification, SOS Emergency Service and Enhanced Roadside Assistance as well as giving you more access to your vehicle’s health. Also included is the new in-vehicle Service Appointment Scheduler, making it even easier to schedule service at your preferred Subaru Retailer. • STARLINK Security Plus – With Security Plus you get all the benefits of STARLINK Safety Plus and your vehicle is protected with features like Stolen Vehicle Recovery Plus with Immobilizer and Security Alarm Notifications. Stay connected to your vehicle with features like Remote Engine Start with Climate Control and Vehicle Alerts that include Boundary Alert, Speed Alert and Curfew Alert. • STARLINK Concierge – Concierge includes all the benefits of STARLINK Safety Plus and Security Plus as well as providing personalized call center support for locating and sending Destinations to your in-vehicle navigation system (if equipped), along with assisting in scheduling Service Appointments with your preferred Subaru Retailer. • WiFi Hotspot – Whether traveling to the store or across the country, SUBARU STARLINK now includes an in-vehicle WiFi Hotspot on AT&T’s nationwide cellular network. Setting up the service is quick and easy, you can connect your vehicle to an already existing AT&T wireless account or choose from one of the simple pay-as-you go plans. See page 30 for details on how to subscribe to the WiFi Hotspot. SUBARU STARLINK Depending on how your vehicle is equipped, some features might not be available. Check with your Retailer or MySubaru to see what SUBARU STARLINK features are applicable to your vehicle. NOTE 8 SUBARU STARLINK SUBARU STARLINK Features List STARLINK Safety Plus SOS Emergency Assistance Enhanced Roadside Assistance Advanced Automatic Collision Notification (AACN) Maintenance Notifications Vehicle Health Report Remote Vehicle Condition Check Service Appointment Scheduler STARLINK Security Plus Stolen Vehicle Recovery Plus Stolen Vehicle Immobilizer Vehicle Security Alarm Notifications Remote Lock & Unlock Remote Horn & Lights Remote Vehicle Locator Remote Engine Start with Climate Control Boundary Alert Speed Alert Curfew alert STARLINK Concierge Destination to Vehicle See MySubaru for more details 9 Getting Started is Easy The MySubaru website (MySubaru.com) and MySubaru Mobile App are your portal to remote services, user preferences as well as other convenient features enabled by your STARLINK subscription. All you need to do is log on to the website or mobile app to access the following features: MySubaru Mobile Application You can download the MySubaru Mobile App to your compatible smartphone from the following sites: • iPhone® – Apple® App store • Android® – Google Play Store After downloading the MySubaru Mobile App to your smartphone, all you have to do to get started is login with your MySubaru username and password for authentication. If you have multiple SUBARU STARLINK equipped vehicles, please make sure to select the vehicle you want to access. The vehicle you have selected will be displayed at the top of the website or mobile app. NOTE • Remote Services • Vehicle Health Report • Maintenance Schedules • Service History • Service Campaigns and Recalls • Warranty Information • STARLINK Profile • STARLINK PIN • STARLINK Packages and Pricing • STARLINK Subscriptions • MySubaru Account Settings • and much more. Getting Started is Easy Access to SUBARU STARLINK Features If you received a temporary password for your MySubaru account you will need to complete your registration on the MySubaru.com website. NOTE 10 The connection between you and your vehicle has never been simpler and the MySubaru website (MySubaru.com) and MySubaru Mobile Application are the best way to stay in touch with your Subaru vehicle. From MySubaru you can access the following information and services: • Remote Services • Vehicle Health • Usage Reports • Appointment Scheduler • Vehicle Maintenance Schedules • Service History • Support Resources You can also use the MySubaru website (MySubaru.com) or MySubaru Mobile App to manage: • Basic account information • Interests and activities • Email and Mail communications • Authorized Users • Authorized Devices • Preferred Retailer • Your Subaru vehicles • Alert settings • Communication Preferences • Personal Identification Number (PIN) • Billing Information • STARLINK Subscriptions • WiFi Hotspot Subscription MySubaru To use any of the STARLINK Remote Services from MySubaru.com or the Mobile App you must enter your STARLINK PIN first. NOTE MySubaru Making Ownership Easy 11 In order to protect your privacy and vehicle information, a secure STARLINK Personal Identification Number (PIN) is required to use many of the STARLINK features and the MySubaru Mobile App. • You will be asked to set your STARLINK PIN, security questions or verification process during the STARLINK enrollment process • You can change your STARLINK PIN at any time after enrollment by choosing the STARLINK menu then the STARLINK Update PIN link on the MySubaru website or from the STARLINK Change PIN link in the My Profile menu on the Mobile App MySubaru Setting or changing your PIN 12 Advanced Automatic Collision Notification (AACN) Upon receiving the Advanced Automatic Collision Notification*, a STARLINK Customer Care Advisor will attempt to establish voice communication with the vehicle occupants and alert appropriate services. Your advisor will respond promptly, 24/7/365 via SUBARU STARLINK to determine the nature of the emergency. • If you are unable to answer, the advisor will let you know that emergency assistance has been notified and is on its way • The advisor will remain on the line until help arrives or until the vehicle’s battery loses power *In order to utilize these services, you must be an active STARLINK subscriber. SUBARU STARLINK Features SUBARU STARLINK Features STARLINK Safety Plus • There are many types of collisions which might not necessarily require deployment of an SRS airbag. Please refer to your vehicle Owner’s Manual for more details. If you are involved in a collision in which the Advanced Automatic Collision Notification (AACN) is activated, depending upon the nature of the collision and the level of accident forces involved, airbag deployment may not always result. • The Advanced Automatic Collision Notification feature requires adequate cellular coverage and signal strength. This feature is only available in the Continental U.S., Alaska, Hawaii, the District of Columbia and Canada. NOTE At any time after initiating a voice call you can adjust the volume of the call by using the volume knob on your vehicle’s head unit. NOTE PHEV – Remote Battery Charge PHEV – Remote Climate Control Stolen Vehicle Immobilizer Vehicle Security Alarm Notifications Remote Climate Control / Heated Seats Enhanced Roadside Assistance Automatic Collision Notification Maintenance Notifications 13 SOS Emergency Service (SOS) In the event of an emergency other than the Advanced Automatic Collision Notification*, your SUBARU STARLINK Customer Care Advisor will be ready to assist you. Press the red SOS button on the overhead console to promptly connect to your advisor from anywhere in the Continental U.S., Alaska, Hawaii and the District of Columbia. • Press the red SOS button • A STARLINK Customer Care Advisor will attempt to establish communication with you to ask about the nature of the emergency and then dispatch the appropriate emergency assistance • If you are unable to answer, the advisor will let you know that emergency assistance has been notified and is on its way • The advisor will remain on the line until help arrives or until the vehicle’s battery loses power • To cancel the SOS call, press and hold the red SOS button for approximately 2 seconds or press the “End Call” button on the head unit display *In order to utilize these services, you must be an active STARLINK subscriber. SUBARU STARLINK Features The SOS Emergency Assistance feature requires adequate cellular coverage and signal strength. This feature is only available in the Continental U.S., Alaska, Hawaii, the District of Columbia and Canada. NOTE At any time after initiating a voice call you can adjust the volume of the call by using the volume knob on your vehicle’s head unit. NOTE Icon Exploration Diagnostic Alerts PHEV – Remote Battery Charge PHEV – Remote Climate Control Stolen Vehicle Recovery Service Stolen Vehicle Immobilizer Vehicle Security Alarm Notifications Remote Climate Control / Heated Seats SOS Emergency Assistance Enhanced Roadside Assistance Automatic Collision Notification Maintenance Notifications For Pending 14 Enhanced Roadside Assistance Enhanced Roadside Assistance connects you directly with Subaru’s Roadside Assistance provider. Should you need assistance, STARLINK will know your exact GPS location coordinates and exactly where to find you. Roadside Assistance can help you with the following: • Jump starts • Emergency lockout service • Gasoline (up to 2 gallons) • Flat tire change • Minor fluid replacement How to use: • Press the blue i-button or use the Roadside Assistance soft button, which is found by selecting the MySubaru icon on the head unit home screen • A STARLINK Customer Care Advisor for Roadside Assistance will attempt to establish a voice communication with you to ask about the nature of the situation and then dispatch the appropriate roadside assistance to the scene • With STARLINK, the advisor will be able to inform Roadside Assistance of your exact location • To cancel an Enhanced Roadside Assistance call, press and hold the blue i-button for approximately 2 seconds or press the “End Call” button on the head unit display SUBARU STARLINK Features Check your warranty for your Roadside Assistance coverage. Your retailer has full coverage details. NOTE At any time after initiating a voice call you can adjust the volume of the call by using the volume knob on your vehicle’s head unit. NOTE PHEV – Remote Battery Charge PHEV – Remote Climate Control Stolen Vehicle Immobilizer Vehicle Security Alarm Notifications Remote Climate Control / Heated Seats Enhanced Roadside Assistance Automatic Collision Notification Maintenance Notifications If you subscribed to SUBARU STARLINK’s Concierge services, an option screen will display on the head unit when the i-button is pressed. From the option screen you can select either Enhanced Roadside Assistance or Concierge Services. If you do not choose a service then Roadside Assistance will automatically be called in approximately 10 sec. NOTE 15 24-Hour Roadside Assistance Along with Enhanced Roadside Assistance, SUBARU STARLINK provides 24-Hour Roadside Assistance from the MySubaru website or Mobile App. Getting help is as easy as calling from your phone or sending a request through MySubaru. All the same services provided by Enhanced Roadside Assistance are at your fingertips. From the MySubaru (MySubaru.com) website or MySubaru Mobile App: • Navigate to the “24-Hour Roadside Assistance” page from the main menu • From the “24-Hour Roadside Assistance” page you can choose to call the toll free number or select to submit an online request • If you select to submit an online request you will be asked to fill out the following information: оо Reason for Assistance (Locked out, Tow, Flat Tire, etc.) оо Provide Details About Your Needs оо Contact Information (First / Last Name and Callback Number) оо Current Location (If known) оо Preferred Contact Method (Email, Text Message or Contact Mobile Number) оо Vehicle Information • Once you completed the online request select the “Request Help Now” button to submit • After you’ve submitted your request you can track the progress of your Roadside Assistance request from the Roadside Assistance submission screen which will display periodic updates PHEV – Remote Battery Charge PHEV – Remote Climate Control Stolen Vehicle Immobilizer Vehicle Security Alarm Notifications Remote Climate Control / Heated Seats Enhanced Roadside Assistance Automatic Collision Notification Maintenance Notifications SUBARU STARLINK Features 16 Diagnostic Alerts SUBARU STARLINK monitors critical vehicle systems. If a warning light illuminates on the dashboard, you will receive an email, text or push notification explaining the issue and how to help resolve it. With more serious issues, the SUBARU STARLINK Service Appointment Scheduler will display on the head unit and assist you in scheduling an appointment at your preferred Subaru Retailer. Vehicle Health Taking care of your vehicle and monitoring its health is easy and convenient. The MySubaru website (MySubaru.com) and MySubaru Mobile App can provide you important vehicle health statuses so you can make better and more informed decisions on the maintenance and care of your Subaru vehicle. Maintenance Notifications Maintenance Notifications help to keep your Subaru vehicle in proper running condition. When your vehicle requires maintenance, you can be notified via email, text, push notifications, or even from your vehicle’s head unit. This feature allows you to more easily maintain your vehicle, while helping to ensure that your vehicle receives the proper care at the proper time. SUBARU STARLINK Features You can change your STARLINK Communication Preferences at any time by choosing the My Profile menu then the Communication Preferences link on the MySubaru website (MySubaru.com) or from the STARLINKTM Communication Preferences link in the My Profile menu on the MySubaru Mobile App. NOTE 17 Service Appointment Scheduler Whether it’s time for regular maintenance or even when your vehicle tells you it’s time to see a certified Subaru Service Technician, setting an appointment at your preferred Subaru Retailer for service is just a few “clicks” away. With SUBARU STARLINK Service Appointment Scheduler you can set an appointment from the MySubaru website, Mobile App or the vehicle’s head unit. Getting your Subaru vehicle to the Subaru professionals for service is easy, no matter where you are. If you are away from your preferred Retailer for service, you can always use Service Appointment Scheduler to locate any of our certified Subaru Retailers near your location. STARLINK Service Appointment Scheduler on your head unit is a convenient way to set a service appointment. Simply select the MySubaru icon on the home screen and choose “Make an Appointment” to get started: • Schedule a new or view any existing service appointments with your preferred Retailer. • Choose the date you would like to schedule an appointment from the options displayed • Set a timeframe for your appointment (AM or PM) • Select an available time • Confirm your appointment Have a question for your Retailer or need directions? STARLINK Service Appointment Scheduler has the following options to help: • Locate a Retailer near your location • Place a phone call to your Retailer (via Bluetooth) • Get directions to your Retailer (Navigation System Only) Subaru is there to help when your vehicle needs service. In the event that a Maintenance interval, Diagnostic Alert or Recall campaign occurs, the SUBARU STARLINK Service Appointment Scheduler will assist you in making sure your vehicle gets the attention it needs to stay healthy and on the road. Depending on how your vehicle is equipped, some features might not be available. Check with your Retailer or MySubaru to see what SUBARU STARLINK features are applicable to your vehicle. NOTE SUBARU STARLINK Features Before using Service Appointment Scheduler for the first time, be sure to pair your smartphone with the vehicle’s head unit, sync your contacts and allow notifications. This will help set the vehicle’s internal clock to your location. NOTE 18 SUBARU STARLINK Features Stolen Vehicle Recovery Plus If your Subaru vehicle is ever stolen, you can get extra peace of mind knowing that a SUBARU STARLINK Customer Care Advisor will work with local law enforcement to help attempt to recover your vehicle. Once a police report is filed, a STARLINK Customer Care Advisor will help provide the authorities with relevant location information to assist in the recovery of your vehicle. • In order for this service to be activated, you must first file a police report and then call 1-855-753-2495 to inform STARLINK of the theft of your vehicle • STARLINK Customer Care Advisor will come online to assist you and ask you to verify your information and provide verification that a police report has been filed, including the case number • Once verified a STARLINK Customer Care Advisor will initiate a stolen vehicle recovery signal that can pin-point the vehicle’s location as well as remotely flash the vehicle’s lights to assist your local law enforcement department with the recovery of your vehicle. STARLINK Security Plus For your own safety, you should NEVER locate your vehicle on your own if it has been stolen. The Stolen Vehicle Recovery Plus feature should be used instead. Your local law enforcement department will inform you of the vehicle’s disposition. NOTE Stolen Vehicle Immobilizer is included as a part of Stolen Vehicle Recovery Plus. This feature can only be authorized by local authorities after Stolen Vehicle Recovery Plus has been activated. NOTE Stolen Vehicle Recovery Service Stolen Vehicle Immobilizer Vehicle Security Alarm Notifications Remote Climate Control / Heated Seats Approved For review Pending Stolen Vehicle Immobilizer Included with Stolen Vehicle Recovery is Subaru’s Engine Immobilizer technology. When activated, the next time the vehicle’s engine is turned off, Subaru’s Immobilizer will restrict the vehicle from starting again, allowing local law enforcement to locate and retrieve the vehicle. Stolen Vehicle Recovery Service Stolen Vehicle Immobilizer Vehicle Security Alarm Notifications Remote Climate Control / Heated Seats Approved For review Pending 19 Vehicle Security Alarm Notification Your SUBARU STARLINK system will automatically notify you when your security alarm is activated. When your security alarm is triggered, this feature will automatically notify any preselected persons of your choice by text message, email or push notification. You can update your Communication Preferences from My Profile section of the MySubaru website (MySubaru.com) and the MySubaru Mobile App. SUBARU STARLINK Features This feature will not work under the following conditions: • If your vehicle has not been started for 14 days • GPS signal is not available • Weak signal area NOTE Vehicle Security Alarm Notifications Remote Climate Control / Heated Seats 20 SUBARU STARLINK Features Remote Engine Start with Climate Control Start your vehicle and set the climate control system temperature with the push of a button from the MySubaru website (MySubaru.com) or MySubaru Mobile App. Choose your preferred heating or air conditioning settings to help bring the interior temperature to a more comfortable level before you enter. SUBARU STARLINK Remote Engine Start with Climate Control gives you more options to make sure your drive is convenient and comfortable. • Log on to the MySubaru website (MySubaru.com) or MySubaru Mobile App • Select “Remote Services” • Select Remote Engine Start with Climate Control and choose the following options: оо Set the climate control system temperature* оо Choose the Engine Runtime** оо Select Rear Climate Zone (if equipped) and it will mirror the climate control settings chosen оо Select the Front and/or Rear defroster оо Select Driver or Passenger seat heater and the power mode preferred (if equipped) оо Air Mode (Ventilation, Ventilation II, Bi-level, Heats, Heat-Defrost) оо Fan Speed (1-7) оо Air Circulation оо If the “Auto” option is selected, the vehicle will automatically control Air Mode, Fan Speed, and Air circulation оо Set a time delay and click “Next” • Enter your STARLINK PIN * Depending on environmental conditions or air conditioner performance, the interior temperature of the vehicle may not reach the desired setting. ** Remote Engine Start will only operate for a total runtime of 20 minutes before the vehicle will need to be manually started from within the vehicle. Remote Services Continued. 21 Remote Engine Start with Climate Control An “Engine Stop” button will display, once your vehicle’s engine has successfully started. If you choose to stop your vehicle, press the “Engine Stop” button and enter your STARLINK PIN to send the command. Depending on how your vehicle is equipped, some features might not be available. Check with your Retailer or MySubaru to see what SUBARU STARLINK features are applicable to your vehicle. NOTE SUBARU STARLINK Features This feature will not work under the following conditions: • Ignition is ACC or ON • Vehicle is moving • Any vehicle door / engine hood / tailgate or trunk is ajar • If your vehicle has not been started for 14 days • Weak signal area NOTE 22 Remote Door Lock & Unlock With the Remote Door Lock & Unlock feature, you can lock or unlock your vehicle door from virtually anywhere via the MySubaru website (MySubaru.com), MySubaru Mobile App, or dialing 1-855-753-2495. In order to use this feature, a STARLINK Personal Identification Number (PIN) is required. To Activate Remote Door Lock & Unlock from the MySubaru website (MySubaru.com) or the MySubaru Mobile App: • Log on to the MySubaru website (MySubaru .com) or MySubaru Mobile App • Select “Remote Services” • Select “Lock Doors” or “Unlock Doors” оо If you choose to “Unlock Doors” you can select to unlock “All Doors” or “Just Driver Door” • Set a time delay, if desired • Enter your STARLINK PIN • The command will be sent to your vehicle and your door(s) will then be unlocked or locked * Depending on how your vehicle is equipped, some features might not be available. Check with your Retailer or MySubaru to see what SUBARU STARLINK features are applicable to your vehicle. SUBARU STARLINK Features These features will not work under the following conditions: • Remote Door Lock when Key is in the ignition* • Remote Door Lock while Ignition is ACC or ON • Vehicle is moving • If your vehicle has not been started for 14 days • Weak signal area NOTE If any door or rear gate is not opened within 60 seconds after using the Remote Door Unlock function, the doors will automatically re-lock. A series of notification beeps will sound approximately 5 seconds before the door(s) automatically re-lock. NOTE 23 SUBARU STARLINK Features Remote Horn & Lights When you are unsure of where you parked your vehicle, you can remotely activate your lights or horn and lights through the MySubaru Website (MySubaru .com) and MySubaru Mobile App. To use Remote Vehicle Locator: • Log on to the MySubaru website (MySubaru.com) or MySubaru Mobile App • Select “Remote Services” • Select “Horn & Lights” • Choose “Horn & Lights or just “Lights” • Set a time delay, if desired • Enter your STARLINK PIN • The command will be sent to your vehicle • Your Lights or Horn & Lights will be activated A “Stop” button will display, once your “Horn & Lights or just “Lights” command has successfully started. To stop the service after it has begun, just press the “Stop” button to send the command. By phone: Dial toll-free 1-855-753-2495 and follow the voice prompts. This feature will not work under the following conditions: • Ignition is ON • Vehicle is moving • If your vehicle has not been started for 14 days • Weak signal area NOTE 24 SUBARU STARLINK Features Remote Vehicle Locator You can quickly and easily find the specific location of your vehicle using the Remote Vehicle Locator. To use Remote Vehicle Locator: • Log on to the MySubaru website (MySubaru.com) or MySubaru Mobile App • Select “Remote Services” • Select “Locate Vehicle” • Enter your STARLINK PIN • The command will be sent to your vehicle • Your vehicle’s location will then display on the map By phone: Dial toll-free 1-855-753-2495 and follow the voice prompts. This feature will not work under the following conditions: • If your vehicle has not been started for 14 days • GPS signal is not available • Weak signal area NOTE 25 Vehicle Alerts You can always monitor the safety of your teenage drivers and your vehicle with SUBARU STARLINK Vehicle Alerts. Choose from Boundary Alert, Speed Alert and Curfew Alert to reinforce responsible driving habits while your children are behind the wheel. Boundary Alert Set geographic boundaries and be notified by email, text or push notification when your vehicle has incorrectly entered or exited any saved designated area. Creating a Boundary Alert: • Log on to the MySubaru website or Mobile App • Select “Vehicle Alerts” • Select “Boundary Alert” • Choose a center point location on the map and set a pin • Select “Boundary Type” (Exits Area or Enters Area) • Select a shape to set the Boundary (circle or square) • Reshape the Boundary shape if necessary by selecting any point on the shape • Click “Save” when you have completed your selections • Set a name for the Boundary Alert • Select “Time Until Alert” (30, 60, 90 or 120 seconds) • Click “Continue” when complete Activating a Boundary: • Choose a saved Boundary Alert and select it. Swipe right and choose “Send to Vehicle”. (Only one saved Boundary Alert can be active at a time) • Enter your STARLINK PIN • The selected Boundary Alert will be sent to your vehicle. • Your vehicle will then notify you if it enters or exits the designated area Edit a Boundary Alert: • Choose a saved Boundary Alert and swipe right, then choose “Edit Alert” • Change any of the settings as desired SUBARU STARLINK Features 26 Speed Alert Choose a speed limit for your vehicle and get notified by email, text or push notification when your vehicle has exceeded the set speed limit. Creating a Speed Alert: • Log on to the MySubaru website (MySubaru .com) or MySubaru Mobile App • Select “Vehicle Alerts” • Select “Speed Alert” • Select “Create a New Speed Alert” • Decide the “Max Speed” • Select “Duration Until Alert” (30, 60, 90 or 120 seconds) • Click “Save” when you have completed your selections • Set a name for the Speed Alert and click “Continue” Activating a Speed Alert: • Choose a saved Speed Alert and select it. Swipe right and choose “Send to Vehicle”. (Only one saved Speed Alert can be active at a time) • Enter your STARLINK PIN • The selected Speed Alert will be sent to your vehicle • Your vehicle will then notify you when it exceeds the maximum speed you’ve chosen Edit a Speed Alert: • Choose a saved Speed Alert and swipe right, then choose “Edit Alert” • Change any of the settings as desired SUBARU STARLINK Features 27 Curfew Alert Decide on a time frame (12 hour maximum) that your vehicle should not be in operation and be notified by email, text or push notification when the ignition has been turned on during your designated time. Every time the vehicle is turned on 15 minutes prior to the set curfew time executing, the vehicle’s head unit will display a message letting the driver know that the curfew time is approaching. Creating a Curfew: • Log on to the MySubaru website (MySubaru .com) or MySubaru Mobile App • Select “Vehicle Alerts” • Select “Curfew Alert” • Select “Create a new Curfew Alert” • Choose a day of the week • Select a Start and End Time, including AM and PM • Set your vehicle’s Time Zone • Click “Save” when you have completed your selections • Set a name for the Curfew Alert and click “Continue” Activating a Curfew: • Choose a saved Curfew and select it. Swipe right and choose “Send to Vehicle”. (Only one saved Curfew can be active at a time) • Enter your STARLINK PIN • The selected Curfew will be sent to your vehicle • Your vehicle will then notify you when it is in operation during the time(s) set Edit a Curfew Alert: • Choose a saved Curfew Alert and swipe right, then choose “Edit Alert” • Change any of the settings as desired SUBARU STARLINK Features You can apply the settings of a selected day to all days of the week by selecting a day then clicking “Apply to All”. NOTE 28 SUBARU STARLINK Features We’re Here to Help SUBARU STARLINK’s Concierge feature is your own personal call center. Need directions to a hotel sent to your vehicle while you’re driving? Need to find a new French restaurant for your anniversary? All you need to do is ask. SUBARU STARLINK Concierge service can also help schedule a service appointment at any Subaru Retailer. STARLINK Concierge Call Center Agents are there to help at anytime, 24 hours a day. SUBARU STARLINK Concierge Call Center Agents can help you with the following: • Locate a Destination for you • Send Destinations to your vehicle’s embedded navigation system (if equipped)* • Book a reservation at a restaurant or hotel • Schedule an appointment at any Subaru Retailer and more How to use: • Press the blue i-button or the Concierge soft button which is found by selecting the MySubaru icon from the head unit home screen • A STARLINK Customer Care Advisor for Concierge will attempt to establish a voice communication with you then provide assistance with your request • To cancel a Concierge call, press and hold the blue i-button for approximately 2 seconds or press the “End Call” button on the head unit display STARLINK Concierge At any time after initiating a voice call you can adjust the volume of the call by using the volume knob on your vehicle’s head unit. NOTE If you subscribed to SUBARU STARLINK’s Concierge services, an option screen will display on the head unit when the i-button is pressed. From the option screen you can select either Enhanced Roadside Assistance or Concierge Services. If you do not choose a service then Roadside Assistance will automatically be called in approximately 10 sec. NOTE 29 Destination to Vehicle Need assistance locating a Destination while on the road? A Concierge Call Center Agent is able to help you search for any Destination and send it to your vehicle’s navigation system. With SUBARU STARLINK Concierge, locating a Destination is easy: • Request a Destination or a Destination type to a Concierge Call Center Agent. For example, if you were looking for a restaurant you could say the name or ask the agent to search for Destinations by requesting restaurant types like BBQ, Pizza, etc. • Once you have decided on a Destination you can ask the agent to have your choice directly sent to your vehicle’s navigation system • Once the Destination is accepted on your embedded navigation system just select “Go” from the main Navigation screen to begin your route MySubaru is always working to provide our customers with a better connected experience and in the future, you’ll have more control of Destinations. Searching, organizing and sending Destinations will soon be available from the convenience of the MySubaru website (MySubaru .com) and MySubaru Mobile App. SUBARU STARLINK Features If your navigation system has an existing route when the Destination is received, the head unit will present the following options for you to choose: • Add Waypoint – Add the new Destination to the existing route • Replace Route – Cancel the existing Route and begin navigating to the new Destination • Cancel – Ignore the new Destination and continue with the current route NOTE 30 Stay Connected SUBARU STARLINK’s in-vehicle WiFi Hotspot keeps you and your family connected using AT&T’s 4G LTE nationwide cellular network. Whether watching movies, playing games or even listening to music, your family won’t miss a beat with SUBARU STARLINK’s in-vehicle WiFi Hotspot. Set up is quick and easy: • Select “Settings” from the head unit Home screen • Scroll down and select “WiFi Hotspot” to turn it on (if the WiFi Hotpot is already on then proceed to the next step). When finished, click the “Back” button in the top left corner of the screen • Select WiFi Hotspot Settings to view or update the following settings: оо WiFi Network Name (SSID) оо SSID Broadcast (Network ON / OFF) оо Security Type (WPA / WPA2) оо Password оо Connected Devices (Maximum of 8 devices) When finished click the “Back” button in the top left corner of the screen to return to the last menu. How to enroll: • Connect your tablet, smartphone or laptop to the SUBARU STARLINK WiFi Hotspot network listed in the settings menu and open your preferred web browser on the device connected • Once the SUBARU STARLINK WiFi Hotspot homepage loads, follow the on screen instructions to create a new account or to add your vehicle to an already existing AT&T Wireless account. You can also subscribe to the WiFi Hotspot from the MySubaru website or Mobile App SUBARU STARLINK Features WiFi Hotspot While driving your vehicle, please remember that only passengers should use mobile devices connected to the SUBARU STARLINK WiFi Hotspot. NOTE 31 SUBARU STARLINK’s System Update ensures that your vehicle is up-to-date by providing an easy and convenient process. In order to make the process as simple as possible, System Updates will only display when you turn your vehicle off and update while you’re away. This will minimize any interruptions to your STARLINK services, so the next time you enter your vehicle the system is ready for the trip ahead. How it works: • Once an update is available, a notification will display on your head unit when your vehicle is turned off • The notification will provide an approximate installation time for the update to complete and important information about the installation process • You can choose to start the update process by selecting “Install” or postpone the update by choosing “Cancel” or “Remind Me Later” • When the update process is complete, a completion screen will display on your vehicle’s head unit and the green status light on the overheard console will illuminate SUBARU STARLINK System Update An update can be postponed up to two times. After the second reminder, the system will automatically update the next time you turn off your vehicle. NOTE SUBARU STARLINK Features While the update installation is in process your STARLINK services will be unavailable, this includes AACN, SOS, Roadside Assistance and Concierge. ! WARNING 32 Index Index Advanced Automatic Collision Notification. 12 Boundary Alert. 25 Concierge 28 Curfew Alert. 27 Destination to Vehicle 29 Diagnostic Alerts 16 Enhanced Roadside Assistance 14 FAQs 32 Maintenance Notifications. 16 Remote Engine Start with Climate Control 20 Remote Door Lock & Unlock. 22 Remote Horn & Lights. 23 Remote Vehicle Locator. 24 Service Appointment Scheduler 17 SOS Emergency Service. 13 Speed Alert 26 Stolen Vehicle Recovery Plus 18 Stolen Vehicle Immobilizer. 18 SUBARU STARLINK System Update 31 Troubleshooting. 33 Vehicle Health 16 Vehicle Security Alarm Notification 19 WiFi Hotspot 30 33 Troubleshooting If there is a problem with SUBARU STARLINK, start by checking the table below. Troubleshooting Symptom Possible Cause Solution The system is unable to connect to SUBARU STARLINK when you press the SOS button or i-button. A subscription to the SUBARU STARLINK service has not been established. Sign up for a subscription to the SUBARU STARLINK service. The telecommunications line is experiencing higher than normal call volume. Terminate the call and try again later. The vehicle is in a location where it is difficult to receive cellular network signal. If possible, move the vehicle to an area where the signal strength may be better and communication will be restored. The call connection is interrupted or the call connection with a STARLINK Customer Care Advisor is interrupted. The telecommunications line or location of the base station could be out of signal range. This is not a malfunction. If possible, move the vehicle and try again. Red Status light on the overhead console is illuminated. A system malfunction has occurred. (Short circuit or disconnection of the connector, etc.) Contact your Subaru Retailer for an inspection. Status light does not illuminate on the overhead console. A subscription to the SUBARU STARLINK service has not been established. Sign up for a subscription to the SUBARU STARLINK service. Remote Engine Start doesn’t execute. The vehicle’s Security Alarm has been activated. Manually start and stop your vehicle, then try The vehicle has been again. manually turned off while Remote Engine Start was in operation. Continued. 34 Troubleshooting Communication Error Codes If a Communication Error message displays on the head unit screen, please use the chart below for descriptions on possible causes. Error Code Possible Cause Solution 101 The vehicle system’s internal clock has not been set Pair your smartphone with the head unit and sync your contacts and allow notifications or use the Vehicle Settings menu on the Multi-Function Display to set the clock. 102 Unable to communicate with the SUBARU STARLINK service If possible, move the vehicle to an area where the signal strength may be better and communication will be restored. 103 The SUBARU STARLINK service is unavailable If possible, move the vehicle to an area where the signal strength may be better and communication will be restored or contact your Subaru Retailer for an inspection. 104 A communication issue occured at the vehicle Check the network signal strength and attempt Service Appointment Scheduler again later. 105 A communication issue occured at the SUBARU STARLINK service Please try Service Appointment Scheduler again later. Symptom Possible Cause Solution SUBARU STARLINK Service Appointment Scheduler does not initiate when selected on the head unit The vehicle’s internal clock has not been set Pair your smartphone with the head unit and sync your contacts and allow notifications or use the Vehicle Settings menu on the Multi-Function Display to set the clock. Troubleshooting 35 FAQs FAQs What is SUBARU STARLINK? SUBARU STARLINK is your in-vehicle technology that provides hands-free connectivity, entertainment, and the security you need to keep you and your vehicle safe. There are two ways to connect using your smartphone. –– STARLINK Multimedia services can be accessed via the SUBARU STARLINK Mobile App. –– STARLINK Safety Plus, Security Plus and Concierge features can be accessed via the MySubaru website (MySubaru.com) or MySubaru Mobile App. If subscribed your vehicle can connect with a STARLINK Customer Care Advisor via the red SOS button or blue i-button on your overhead console. SOS/i-button Connection with a Customer Agent is not limited to any STARLINK subscription plan. What do the buttons on my overhead console do? The SUBARU STARLINK buttons: • Provide access to a SUBARU STARLINK Customer Care Advisor. –– Pressing the red SOS button connects users with a live advisor who can provide emergency assistance. • Provide access to Subaru Roadside Assistance. –– Pressing the blue i-button connects you to Subaru Roadside Assistance or Concierge Services (if subscribed). 36 FAQs Will SUBARU STARLINK use my smartphone connection to provide me emergency assistance? SUBARU STARLINK allows you to use both SOS Emergency Assistance, Enhanced Roadside Assistance and Concierge functions (if subscribed) without the use of your smartphone. However, all STARLINK Remote Access features do require using your smartphone or MySubaru.com to activate remote services. Why do I need to download the mobile apps to my smartphone? What is the difference between the SUBARU STARLINK App and MySubaru App? Downloading either the SUBARU STARLINK App or MySubaru App allows you to bring content from your smartphone into your vehicle, while keeping your hands on the wheel and your eyes on the road. The SUBARU STARLINK App is your link to SUBARU STARLINK in-vehicle technology that offers cloud services via your smartphone and cellular network data plan. It provides hands-free connectivity and entertainment for your next adventure. The MySubaru App allows you access to remote services, user preferences, diagnostic alerts and other great features enabled by your STARLINK subscription. 37 FAQs What are the SUBARU STARLINK Safety Plus, Security Plus and Concierge features? SUBARU STARLINK Safety Plus gives you peace of mind in case an emergency occurs when you are in your vehicle. SUBARU STARLINK Security Plus features provide Stolen Vehicle Recovery Plus with Immobilizer and Security Alarm Notifications. Security Plus also adds Remote Door Lock & Unlock, Stolen Vehicle Recovery Plus, Remote Vehicle Locator, Remote Engine Start and more. SUBARU STARLINK Concierge provides you with personalized call center support. Depending on how your vehicle is equipped, some features might not be available. Check with your Retailer or MySubaru to see what SUBARU STARLINK features are applicable to your vehicle. How does Enhanced Roadside Assistance work? Pressing the blue i-button enables your Enhanced Roadside Assistance working in conjunction with your vehicle’s Subaru Roadside Assistance coverage 24/7/365. No matter where you are, your STARLINK Customer Care Advisor will know your exact GPS location and will be able to send help. What do I do if I forgot or want to update my PIN? Log in to MySubaru choose the STARLINK menu then the STARLINK Update PIN link on the MySubaru website (MySubaru.com) or from the STARLINK Change PIN link in the My Profile menu on the MySubaru Mobile App. 38 How do I contact a SUBARU STARLINK Customer Care Advisor? If you have any questions about SUBARU STARLINK, please call a STARLINK Customer Care Advisor at 1-855-753-2495. What smartphones are compatible with the MySubaru Mobile App? Please go to www.Subaru.com/STARLINK to check for the most current list of supported devices. FAQs How does Stolen Vehicle Recovery Plus work with local law enforcement to help recover my Subaru vehicle? If your Subaru vehicle is stolen, you will need to first file a police report with local law enforcement. The SUBARU STARLINK Customer Care Advisor will need a police report number to help local law enforcement find the location of your vehicle. Once your vehicle has been returned, you will need to contact a Customer Care Advisor and request that Stolen Vehicle Recovery Plus and Stolen Vehicle Immobilizer (if applicable) be deactivated. 39 FAQs How do I change my notifications email or phone number? Log in to MySubaru.com, select your vehicle and click on “My Profile” link in the center navigation bar and choose “Account settings”. You can modify the notification to be one of the following; phone, email, text or push notification (if applicable). What kind of warranty coverage does SUBARU STARLINK have? SUBARU STARLINK equipment is covered under the 3-Year/36,000-Mile Subaru Limited Warranty. The information contained in this SUBARU STARLINK manual was correct at the time of printing. However, specifications and equipment can change without notice. Subaru reserves the right to change product specifications and equipment at any time without incurring obligations. Some vehicles are equipped with optional equipment. Specifications apply to U.S. vehicles only. Please contact your Subaru Retailer for current specifications.
SEOCONTENT-END
Last update on 2025-04-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.