Reprogramming

J2534 Reprogramming Files Chart – Subaru

by

J2534 Reprogramming Reprogramming J-2534 Files Chart – R_J2534   [embeddoc url=”https://static.oemdtc.com/TSB/PackFileDatabaseJuly2016.pdf”]   J2534 Reprogramming Subaru reprogramming files using a generic (non-OEM) SAEJ2534 pass-thru vehicle programming device [easyazon_cta align=”center” identifier=”B09SP8F2X6″ key=”small-light” locale=”US” tag=”subaruoemdtc-20″] [easyazon_cta align=”center” identifier=”B006HUTM8S” key=”small-light” locale=”US” tag=”subaruoemdtc-20″] [easyazon_cta align=”center” identifier=”B006HV5N08″ key=”small-light” locale=”US” tag=”subaruoemdtc-20″] are available by contacting Service Technical Information Company toll free at 1-866-428-2278. … Read more

Reprogramming File Availability for DTC P0604 – 2014-2016 Subaru XV Crosstrek Hybrid

by

NUMBER: 07-107-16 DATE: 02/29/16 APPLICABILITY: 2014-16MY XV Crosstrek Hybrid (HEV) Models SUBJECT: Reprogramming File Availability for DTC P0604   INTRODUCTION This bulletin announces availability of reprogramming files to optimize the Drive Motor Control Module (DMCM), part of the Hybrid electrical system.  In rare cases, if the operator cycles the ignition off then back on again … Read more

Reprogramming File Availability for Extended Engine Cranking (Delayed Starting) and Engine Oil Level Detection Improvement – 2015 Subaru Legacy & Outback

by

NUMBER: 11-162-16R DATE: 04-05-16 REVISED: 04-21-16 APPLICABILITY: 2015MY Legacy and Outback Models SUBJECT: Reprogramming File Availability for Extended Engine Cranking (Delayed Starting) and Engine Oil Level Detection Improvement   INTRODUCTION This bulletin announces availability of reprogramming files to address customer concerns of extended cranking time before the engine starts.  These files also optimize the ECM for improved … Read more

Reprogramming File Availability for DTC P0300 and Rough Idle – 2015 Subaru WRX & Forester 2.0L Turbo (DIT)

by

NHTSA ID Number: 10120966 Manufacturer Communication Number: 11-161-16   Summary This bulletin announces the availability of new reprogramming files for optimizing the ECM to address the following customer concern: Rough idle after a warm engine restart. In rare cases, DTC P0300 may also be stored.   2 Affected Products Vehicles MAKE MODEL YEAR SUBARU FORESTER 2015 SUBARU … Read more

Transmission Control Module (TCM) Reprogramming File Availability for Inconsistent Engine Braking “Feel” – 2010-2011 Subaru Legacy & Outback

by

NUMBER: 16-100-16 DATE: 04/15/16 APPLICABILITY: 2010-11MY Legacy and Outback 2.5L NA Models SUBJECT: Transmission Control Module (TCMeBay) Reprogramming File Availability for Inconsistent Engine Braking “Feel”   INTRODUCTION This bulletin announces availability of reprogramming files to optimize the TCMeBay.  The files will address customer concerns of inconsistency in the amount of engine braking experienced when using Manual … Read more