Reprogramming File Availability for DTC P0300 and Rough Idle – 2015 Subaru WRX & Forester 2.0L Turbo (DIT)

NHTSA ID Number: 10120966

Manufacturer Communication Number: 11-161-16

 

Summary

This bulletin announces the availability of new reprogramming files for optimizing the ECM to address the following customer concern:

  • Rough idle after a warm engine restart. In rare cases, DTC P0300 may also be stored.

 

2 Affected Products

Vehicles

MAKE MODEL YEAR
SUBARU FORESTER 2015
SUBARU WRX 2015

 

 

 


SERVICE BULLETIN

NUMBER: 11-161-16
DATE: 02/29/16

APPLICABILITY: 2015 WRX and Forester 2.0L Turbo (DIT) Models
SUBJECT: Reprogramming File Availability for DTC P0300 and Rough Idle

 

INTRODUCTION

This bulletin announces the availability of new reprogramming files for optimizing the ECM to address the following customer concern:

  • Rough idle after a warm engine restart. In rare cases, DTC P0300 may also be stored.

 

PRODUCTION CHANGE INFORMATION:

The new logic was incorporated into production starting with the following VINs:

  • WRX: F*818365

NOTE:  These files have been incorporated into production on both models at the start of 2016MY production.  Although these vehicles were produced with the programming for the conditions covered by Service Campaign WQW-58, they did not include the programming for the above listed condition at the time of production.  Not all vehicles will experience the above listed conditions.  Since WQW-58 was released concurrently with the development of this programming and since program files are cumulative in nature, the WQW-58 files also include this programming enhancement.  Hence, the same files are used for both applications.

 

PACK FILE APPLICABILITY:

MODEL TRANSMISSION PAK FILE NAME NEW ECM PART NUMBER NEW CID NUMBER
2015MY WRX 2.0L MT 22765AG235.pak 22765AG235 LF75300S
CVT 22765AG245.pak 22765AG245 LF75300T
2015MY Forester 2.0L Turbo CVT 22765AG974.pak 22765AG974 LF61700B

 

SERVICE PROCEDURE / INFORMATION

NOTES:

SOA now highly recommends connecting the Midtronics GR8 Diagnostic Battery Charger to the vehicle and utilizing the Power Supply Mode feature anytime a vehicle control module is being reprogrammed. Once the GR8 is connected to the vehicle, as long as the battery is fully charged, it takes less than 3 minutes to boot-up the charger, select the Power Supply Mode, and have the battery voltage stabilized and ready for reprogramming.

 

VERY IMPORTANT: This information is applicable to the Midtronics GR8 Diagnostic Battery Charger ONLY. It does not apply to any other brand / type of “generic” battery charger whatsoever.  ONLY the GR8 and its Power Supply Mode feature has been tested and approved by Subaru of America, Inc. (SOA).

  • If the GR8 indicates the vehicle’s battery must be charged, charge the battery using the GR8 before proceeding to reprogram the vehicle while using the Power Supply Mode.
  • Control module failures as a result of battery discharge during reprogramming are not a matter for warranty. Should any DTCs reset after the reprogramming update is performed, diagnose per the procedure outlined in the applicable Service Manual.

 

WARRANTY / CLAIM INFORMATION

For vehicles within the Basic New Car Limited and / or Emissions Warranty period, this repair may be submitted using the following claim information:

LABOR DESCRIPTION LABOR
OPERATION #
LABOR
TIME
FAIL
CODE
MFI OBDII ECM Reprogramming A455-288 UPG-48 0.4

 

IMPORTANT: The NEW Calibration Identification number (CID) for any newly-installed programming (as confirmed from the actual control module AFTER installation) MUST be noted on the repair order as this information is required for claim submission.

 

NOTE: The pack file listings provided in this bulletin are the latest available at the time of publishing.  Updates are often released thereafter without revision to the original bulletin.  For this reason, it is critical to always have the latest version of Select Monitor software installed on your system.  You can confirm if a later version is available by entering the CID listed in this bulletin into FlashWrite.  If a newer CID is shown as available in FlashWrite, reprogram using that file.

 

IMPORTANT REMINDERS:

  • SOA strongly discourages the printing and/or local storage of service information as previously released information and electronic publications may be updated at any time.
  • Always check for any open recalls or campaigns anytime a vehicle is in for servicing.
  • Always refer to STIS for the latest service information before performing any repairs.

 


1 Associated Document

Manufacturer Communications

NUMBER: 11-161-16
DATE: 02/29/16

https://www.nhtsa.gov/recalls?nhtsaId=10120966

MC-10120966-9999.pdf 264.167KB

MC-10120966-9999

 


 

What J2534 reprogramming capabilities are available?

(4a) J2534 Reprogramming

Subaru reprogramming files using a generic (non-OEM) SAEJ2534 pass-thru vehicle programming device are available by contacting Service Technical Information Company toll free at 1-866-428-2278. The cost for the CD-ROM with all reprogramming files is $75.00 plus S/H and applicable state tax. Files will be updated four (4) times per year, in CD-ROM format, with all available reprogramming service information at the same above offered cost. Authorized Subaru Dealers are provided the same reprogramming information.

Before purchasing, the reprogramming details can be found in the following Reprogramming J-2534 Files chart. Click the link to view the PDF chart.

Subaru J2534 Reprogramming software meets the latest available J2534-1 specification. Our Reprogramming J2534 Files chart does not specify the Calibration Identification Number (CID); however, this information is included in our offered CD-Rom.

Note: The ECM or TCM being reprogrammed may already contain some or all of the reprogramming files listed in the Reprogramming J2534 Files chart shown by release date. It is possible to damage the vehicles ECM/TCMduring the reprogramming event. Once the reprogramming process has started, it is recommended not to interrupt the process until the event is completed. If you experience any problems, please contact your scan tool maker for further instructions.

 

(4b) Are all pre-2004MY Subaru vehicles compatible with J2534?

No. Subaru has no reprogramming capability for model years 1996-1998. Starting with our 1999 model year, please see our Reprogramming Pre-J2534 Files chart for affected model reprogramming information.

Both pre-J2534 reprogramming and J2534 pass thru reprogramming files are included in the offered HDS kit software for aftermarket service provider application.

 

Reprogramming File Availability for DTC P0300 and Rough Idle - 2015 Subaru WRX & Forester 2.0L Turbo (DIT) » small light Tactrix Openport 2.0
Reprogramming File Availability for DTC P0300 and Rough Idle - 2015 Subaru WRX & Forester 2.0L Turbo (DIT) » small light CarDAQ-Plus 2 Diagnostic Code Reader and J2534 Programming Tool
Reprogramming File Availability for DTC P0300 and Rough Idle - 2015 Subaru WRX & Forester 2.0L Turbo (DIT) » small light Drew Technologies (DRWCDPLUSKIT) CarDAQ-Plus J2534 Flash Reprogramming Kit
Reprogramming File Availability for DTC P0300 and Rough Idle - 2015 Subaru WRX & Forester 2.0L Turbo (DIT) » small light CarDAQ-M Modular PassThru J2534 Vehicle Reflash Hardware
Dearborn d-Bridge Adapter J2534 OBDII Engineering Tool
Reprogramming File Availability for DTC P0300 and Rough Idle - 2015 Subaru WRX & Forester 2.0L Turbo (DIT) » small light MAXIFLASH PRO (ALT-MF2534)

 


 

https://techinfo.subaru.com/

 


 

Bestseller No. 1
LAUNCH X431 PRO5 Elite,J2534 Reprogramming Tool with CAN/CAFD/DoIP/HD protocols,AutoAuth for FCA SGW OBD2 Scanner Diagnostic Tool,Bidirectional Scan Tool,ECU Coding,50+ Reset,OEM Full Systems Scanner
  • 🆚LAUNCH X431 PRO5 scan tool Upgrade all functions of X431 PRO3/X-431 Throttle III/X431-TorqueIII/X431 V+, PROS V+, PAD3. ⓵ J2534 ECU Programming &Online functions directly connect to OEM server, 50+ reset same as X-431 Throttle;⓶Bi-directional control and All system diagnostics as Snap-on scanner; ⓷ Support 150+ brands Vehicles (include CAN/CAFD/DoIP/HD protocols and AutoAuth for FCA SGW) ⓸Powered by 8-core processor(1.8GHz), Android9.0 OS, 2.4 & 5GHz WiFi connection.
  • 🚜[J2534 Reprogramming With FREE SMARTBOX 3.0】Save more than $2000, LAUNCH X431 PRO5 support J2534/DOIP/CANFD/HD protocols (Needn’t buy HDIII Module,Manufacture software and non-16pin adaptors need to be purchased separately.) Download OEM software from the manufacturer’s server to 1) program data to blank/used ECUs; 2) Reflash ECUs with data loss; 3)Upgrade ECU software version. As a wireless VCI allowing the vehicle to transmit data to the diagnostic tablet without a physical connection.
  • 👏[50+ Reset, Continuously Updated Reset Functions]: With the LAUNCH diagnostic tool, You will never be bothered by tricky vehicle issues and keep pace with newer technology. 50 commonly reset functions ( in the quick page ) reaching into the smallest parts to root out the problems. Extra 300+ repair functions ( in-vehicle catalog) for specific models extend the capability to reset, regeneration, initiation, matching, etc. (Functions vary by models, configurations, and systems.)
  • 🌐[One stop Intelligent Diagnostic Tool]: LAUNCH X431 PRO5 obd2 scanner Bluetooth provides Repair Tips, Repair Assist, Component Measurement, TSB, Relevant Cases DTC Analysis to simplify complex diagnostic and achieve the trouble-free repair. 🤩[One Scanner For Multiple Uses]: LAUNCH diagnostic tool PRO5 collaborates with add-on modules (ADAS, Videoscope, TSGUN, X-ProG3, WiFi Pinter, Battery Tester) to expand business applications and improve diagnostic accuracy.
  • 👍【2023 New OE Level Online Functions 】Bidirectional Scan Tool offers you various high-end online functions, which enable you to access the online data to do fast & complicated vehicle repairs, e.g. 1) ECU Coding for replacing, match, relearn, recode new ECU modules; 2) Online Coding for BMW, Audi, VW, Porsche, Benz to surf OEM data; 3) VAG Guided functions ease complex issues; 4) Personalization & ADAS improving car performance and driving safety.
Bestseller No. 2
Autel MaxiFlash Elite Vehicle Communication Interface J2534 PassThru ECU Programming Device Bluetooth Connection Internet Update Works with PC or Autel MS908S MS908 PRO MS908CV MK908 MK908P MS Elite
  • As a multi-protocol Pass-Thru vehicle interface, MaxiFlash Elite is a fully compliant SAE J2534-1 & SAE J2534-2 (March 2006) device. Specially designed to provide users with convenient PC communication and ECU reprogramming capabilities on any modern vehicle diagnostic bus, MaxiFlash Elite offers the most significant features desired by OEM customers: reliability, fast performance and flexibility.
  • MaxiFlash Elite is an accessory tool for MK908P, MS908S Pro, MaxiSys Elite to program ECUs on specific for BMW and for Benz vehicles, in case you lost the J-2534 programmer.★★NOTE: J2534 CANNOT directly work with these single devices. After you received the J2534, you HAVE TO send us both the S/N(12 digits) of your tablet MS908S(etc.) and J2534. So, technically, Autel engineers can help you bind J2534 with your devices. If need any supports, Please contact us.
  • Wireless with advanced networking functions:Built-In Wireless with advanced networking functions and data storage. Fast performance ensures reprogramming even the newest controllers & Internet upgradable and updatable.Rugged design capable of withstanding harsh environments *Internet updateable.
  • Fully compatible with both SAE J2534-1 and J2534-2 gram standards *Performs the standard PassThru J2534 functionality *Compatible with for Toyota Techstream, for Volvo VIDA, for Honda HDS, for Jaguar-Land Rover IDS and for BMW 3G for OEM diagnostics,Fast performance ensures quickly gram even the newest controllers.
SaleBestseller No. 3
Autel MaxiFlash Elite VCI J2534 Pass-Thru ECU Programming Tool, Multi-Protocol PassThru Interface, Work with Autel MaxiSYS Elite II, Elite, MS908, MS908S Pro, MS908CV, MK908P, MK908 Pro II and PC
  • 🌐【Works with Autel MK908, MS908(S/Pro), MK908P, MaxiSys Elite】Autel J2534 work with these tools to program ECUs on specific BMW/ BENZ for specific functions. ★★NOTE: J2534 CANNOT directly work with these single devices. After you received the J2534, you HAVE TO send us both the S/N(12 digits) of your scanner MS908S(etc.) and J2534. So, technically, Autel engineers can help you bind J2534 with your devices. If need any supports, contact us via: 🚘auteldirect @ outlook. com🚘.
  • 🌐【SAE J2534-1 & J2534-2 Standards】Autel MaxiFlash Elite J2534 is a fully compliant SAE J2534-1 & SAE J2534-2 (March 2006) device, which performs standard PassThru J2534 functionality: Compatible with for Toyota Techstream, Volvo VIDA, Honda HDS, Jaguar-Land Rover IDS and BMW 3G for OEM diagnostics. Autel MaxiFlash J2534 is also specially designed to provide users with P-C communication and ECU reprogramming capabilities on any modern vehicle diagnostic bus, reliability and flexibility.
  • 🌐【High-speed Transmission Speed】Autel MaxiFlash Elite Reprogramming Device J2534 supports simultaneous communication definition in J2534-1, running 3 protocols at the same time, which greatly improves reprogramming and diagnostic speed. Embedded with the ARM9 Dual-core processor (clocked up to 500MHz), which further boosts the communicating speed to save more times and win more business.
  • 🌐【Multiple Devices Connected with PC】Autel MaxiFlash Elite J2534 also supports multiple device connections to the PC, which can operate diagnostic and reprogramming functions on more than one vehicle at the same time. Autel MaxiFlash Elite J2534 built-in wireless and data storage, which can update via Internet. It also ensures quickly reprogramming even the newest controllers.
  • 🌐【Extensive Compatibility】Autel MaxiFlash J2534 is compatible with Toyota Techstream, Volvo VIDA, Honda HDS, Jaguar-Land Rover IDS and BMW 3G for OEM diagnostics. To check compatibility, please contact 🚘auteldirect @ outlook . com🚘 directly for satisfaction-guaranteed support!
Bestseller No. 4
CarDAQ-Plus 3 All Makes J2534 Reprogramming Tool
  • ALL OF THE J2534 PROTOCOLS - This single unit has all of the protocols you need for your OEM J2534 reprogramming and diagnostics including the latest in DoIP and CanFD
  • J2534 TECHNICAL SUPPORT - FREE for the life of the tool. Staffed by technicians who understand vehicle repair and J2534 Pass‑thru
  • TOOLBOX WITH OEM APPLICATION DESCRIPTIONS - educational video tutorials and real-time news – Giving you the confidence and up-to-date knowledge to get the job done
  • J2534 v05.00 API - The newest version of J2534 to give you the latest in pass-thru technology
  • FUTURE PROOF WITH 4 CAN CHANNELS - Going beyond the 3 required by select Chrysler/FCA models, CarDAQ-Plus 3 also provides a 4th to meet the needs of future OEM applications
Bestseller No. 5
RAP2 OEM J2534 Remote Reprogramming Tool for GM / Ford / Chrysler / Toyota / Honda / Nissan / Hyundai / Kia / BMW / Mercedes
  • All in one kit. Everything you need to reprogram vehicles in your shop. Includes OEM software and we do the programming for you.
  • Stop sending vehicles to the dealer or calling a mobile technician. We do the programming for you.
  • Includes hardware, OEM software, voltage maintainer and access to our team of remote experts so vehicles can be reprogrammed in your shop hassle‑free.
  • Call to schedule your programming session, plug it in, and we do the rest!
  • Currently covers BMW, Chrysler, Ford, GM, Toyota, Honda, Hyundai / Kia, Mercedes and Nissan.
Bestseller No. 6
Autel MaxiSYS MS908S PRO II: 2023 J2534 ECU Programming Coding Adaption, Level-Up of MS908S Pro Elite MK908P, Same Programming As MSUltra MS919 MS909, Android 10, 4G+128G, Active Test 36+ Service, FCA
  • 🔥🔥🔥【2023 TOP-ENHANCED HARDWARES MAKING MS908S PRO II THE CHAMPION】Autel has upgraded the MS908S Pro to MS908S PRO II with 2023 Enhanced Hardwares & Newest Functions, making it FASTER and SMARTER! Upgraded of Autel MS908S Pro/ MaxiCOM MK908P/ Elite, MS908S PRO II is most wanted with level-up performance: 🏆User-friendly Android 10 🏆5X faster Octa-core processor 🏆16M Camera 🏆Enhanced 2048*1536 display 🏆4G+128GB for fast running & data storage 🏆5G&2.4 GHz Dual WiFi for efficient updatings.
  • 👍【AMAZING! 2023 NEWLY ADDED FUNCTIONS】Autel armed $300+ valued new functions to 2023 MaxiSYS MS908S PRO II with the same cost as before! Including: ✅Enhanced ECU Programming for BENZ & BMW. ✅10+ High-end Functions ✅Advanced ECU Codings ✅36+ Hot Services ✅Full Bidirectional ✅👉🏆Diagnostics for Tesla & McLaren cars 👉🏆VIN/ License SCAN 👉🏆WIFI Print 👉🏆D-PDU/RP1210 ✅ BT506/ MP408/ MV108 supports ✅FCA & RENAULT SGW. ✅NO IP-Restriction 😎👊Autel always pursues HIGH PRODUCTS for you!
  • 👍【ONE-STOP ECU PROGRAMMING FOR BENZ/ BMW & J2534 DEVICE EXTENDED PROGRAMMING ABILITY FOR MULTI-CARS】Coming with J2534 device, Autel MS908S Pro II is competent for ECU programming/ ECU Online coding/ adaption for BENZ/ BMW cars. It can program blank ECU, adapt existed ECU, match components, reflash second-hand ECU, unlock hidden functions, etc.👍👉J2534 device ALONE can also work with P-C OE-softwares to program other cars, like Ford, GM, Honda, etc. 🚦📢👉OE-softwares need to BUY from car webs.
  • 👍【ADVANCED ECU CODING, CUSTOMIZE YOUR CARS】Automotive diagnostic scan tool MS908S Pro II features Advanced ECU Coding, so you can use it to customize your cars as needed by disabling some unneeded OEM settings (like auto start-stop, chimes, etc), or activating the hidden features pre-programmed to car computer to get high-end functions (like US-style daytime light, auto door look at a particular speed, etc).👉Compatible with BENZ, BWM, VW, Audi, Skoda, etc.
  • 👍【36+ MAINTENANCE SERVICES & VAG GUIDED FUNCTIONS】Same as Autel MSUltra/ MS919/ MS909/ Elite II, Autel MaxiSYS MS908S PRO II features 36+ services for 10,000+ vehicles, such as crankshaft relearn, Oil Reset, EPB, SAS, A/F Setting, Throttle, Suspension, Headlamp, IMMO (basic), Injector Coding, Power Balance, BMS Reset, Brake Bleed, etc. 🚦📢👉Guided Functions provides step-by-step guidances to complete complex service operations for VAG cars, like: Bently, VW, Audi, Skoda, Seat, etc.
Bestseller No. 7
Mongoose-Plus J2534 OEM Vehicle Interface Cable - GM OEM Reprogramming and Diagnostics
  • Industry-leading J2534 Pass-Thru Technology: Enabling diagnostics, reprogramming and security functions for dealerships and the independent repair facility. Economical and compact pass-thru devices provides an easy-to-use interface that allows you to repair complex vehicles with OE applications in your shop. Each type (see single branded types above) Mongoose-Plus is engineered to work with one of the following OEM's J2534 applications for Chrysler, Ford, GM, Nissan, Toyota, & VW/Audi.
  • Supports Current GM Vehicles: Now includes CAN-FD, DoIP (Diagnostics over Internet Protocol - as defined in J2534-2) and support for J2534 version 5.0. This is the tool that GM dealerships use for diagnostics and reprogramming.
  • NEW Bluetooth Wireless Options Available: Providing wireless connectivity between your laptop and the Mongoose-Plus
  • Expert Product Support: Staffed by technicians who understand vehicle repair and J2534 Pass‑Thru applications to help you with any technical setup questions
  • Key Registration and Immobilizer Support: Using NASTF Vehicle Security Professional credentials
Bestseller No. 8
BOSCH Automotive Tools MTECH2 Mastertech II J2534 VCI with Wired/Wireless Capability for OEM Reprogramming and Diagnostics on GM, Ford, FCA, Nissan/Infiniti, Honda/Acura, and Toyota/Lexus Vehicles
  • [J2534 COMPLIANT] - The Mastertech II is a J2534-1 and J2534-2 compliant VCI for OEM reprogramming and diagnostic applications
  • [FULLY VALIDATED BY TOP 6 OEMS] - Mastertech II has been fully validated to operate with the top 6 OEM reprogramming applications: GM, Ford, FCA, Nissan/Infinity, Honda/Acura, and Toyota/Lexus
  • [PRE-CONFIGURED] - The pre-configured wireless and wired connections make it quick and easy to connect to a vehicle from your PC (requires PC compliant with OE specifications and software)
  • [RIGHT TO REPAIR] - Supports 'Right to Repair' (R2R) initiatives
  • [COMPREHENSIVE KIT] - Kit includes: VCI, WiFi adapters (wireless PC to VCI), J1962 Cable (connect to vehicle), USB cable (connect to PC for firmware updates and setup), and Quick Start Guide
Bestseller No. 9
LAUNCH X431 PRO5 Diagnostic Scanner, J2534 Reprogramming Tool with ECU Coding, Upgrade of X431 PRO3/V+, 50+ Service, Intelligent Diagnostics, Guided Functions, CAN FD/DoIP, 2-Year Free Update
  • 👍[New & Outstanding X431 PRO5 Scanner] LAUNCH X431 PRO5 scan tool, upgrade of LAUNCH X431 PRO3 & X431 V+ PRO, configures a SmartBox 3.0 VCI (J2534/DoIP/CAN FD compliant) that performs online programming for BMW & Benz models as OEM level. More powerful features: Online Coding for Porsche/Audi, Heavy-duty Truck Diagnostics, VAG Guided Functions, 50+ Services, etc., bring ease & efficiency. Powerful software even covers online diagnostics for FCA cars & newer model data.
  • [J2534 Programming with Smartbox3.0] If you’re seeking all-in-one solutions for car ECU tuning needs, LAUNCH X431 PRO5 programming tool is ready to work for you. Support online programming for BMW&Benz and hold exclusive programming backup/restoration. Come with a Smartbox 3.0 device of J2534 standard and pair with a PC to download OEM software to upgrade the ECU software, which maximizes the vehicle performance and minimizes diagnostic problems.
  • [ECU Coding Customizes All You Want] With top of the tech instruction and vehicle data, LAUNCH X431 PRO5 diagnostic scanner performs well in ECU Coding and makes everything easier 1) recode adaptive data after ECU replacement 2) personalization/retrofit to improve car comfort: deactivate auto start-stop or change interior lights 3) coding data backup/reserve 4) online coding for BMW/Benz/Porsche/VW/Skoda/Seat 5) online matching/calibration for VW/for Audi, etc.
  • [Huge Vehicle Software Database] LAUNCH scanner PRO5 can be nominated as a powerful troubleshooter for 99% of post 1996-automobiles. Provide abundant exclusive functions for effortless diagnostics: Benz/BMW Data Backup/Restoration; Benz/BMW Manual Mode Programming; Benz SCN Coding/Variant Coding; BMW Coding (with newer data to 2022.03); AutoAuth for FCA SGW(2018 later); Various Online Coding Data for VW/for Audi, etc. 2-Year free updating will keep renewing the data for more vehicles.
  • [AutoAuth Access & 50+ Services] Partnered AutoAuth FCA US, LAUNCH scanner can directly login to the AutoAuth account and secure check (reading DTC, active test, reset functions, etc.) for FCA vehicles. 50+ services that are needed for repair shops have been packed in X431 PRO5 auto scanner, such as Hot functions (Oil Reset, EPB Reset, SAS Reset, ABS Bleeding, etc.) and Comprehensive functions (High Voltage Battery Diagnostics, Transport Mode),
Bestseller No. 10
2022 Newest LAUNCH X431 PRO5 J2534 Reprogramming Tool,50+ Reset,Key IMMO Program,ECU Coding Active Test Scan Tool, LAUNCH CRP129X Scan Tool
  • Based on LAUNCH X431 V+/PRO3/PROS/PADIII/TURBO/Throttle, upgrading all the diagnostic functions & hardware configuration and bringing 8 x faster processing. J2534 ECU Programming, Online ECU Coding & Adaptations, Intelligent AutoVIN & AutoScan, 50+ Hot Services, All System Diagnostics, VAG Guided Function, FCA AutoAuth Access, etc. The software is updated to 2018/2019/2020/ and covers the most recent car makes & models in 2021.
  • LAUNCH CRP129X scan tool scanner for car features 5 reset services: Oil Reset, Steering Angle Calibration, Electronic Parking Brake, TPMS Reset, Throttle Adaptation, give you many choices. The Auto VIN scan can identify car make, model, and year info to shorten the navigation process. You can generate a vehicle health report by one-click and share to your email via Wifi which helps avoid blind maintenance, save time and money.
  • 【All System Diagnostics for 99% Vehicle Coverage】Serve for 150+ American, Asian, European brands, and cover 99% of vehicle models worldwide. This LAUNCH diagnostic scan tool can operate complete full-function diagnostics to all on-board systems to troubleshoot and repair all vehicle problems, including Engine, Transmission, Airbag, ABS, ESP, TPMS, Immobilizer, Gateway, Steering, Radio, Air Conditioning, etc.
  • 【Free TPMS Activation Tool】+【Great Gift Idea】We offer a free EL50448 TPMS Activation Tool work for GM cars to give thanks for customers' continued support. Just click "Extra Savings" under price and add both to your cart. Limited quantity. First come, first served. 👍A top present choice for your father, husband, brother or boyfriend. EVERY CAR OWNER WILL NEED IT!
  • 【100% GENUINE PRODUCT】This LAUNCH X431 PRO 5 automotive scanner officially authorized from LAUNCH enjoys the extended 5 years extra-long-term warranty, and 60 days no-question return & replacement policy. We are always at hand for any issues arising from this scan tool’s use, with the 24/7 response to every inquiry email from aftersale-launchdirect@outlook.co m for your shopping experience that feels secure.

Last update on 2023-05-27 / Affiliate links / Images from Amazon Product Advertising API

This product was presentation was made with AAWP plugin.

 

Leave a Comment

Share to...