December 19, 2019 NHTSA CAMPAIGN NUMBER: 19V910000
In the event of a crash necessitating passenger frontal air bag deployment, the air bag may not deploy properly, increasing the risk of injury.
NHTSA Campaign Number: 19V910
Manufacturer Subaru of America, Inc.
Components AIR BAGS
Potential Number of Units Affected 46
Subaru of America, Inc. (Subaru) is recalling certain 2016-2017 Outback vehicles. A replacement air bag control module may have been installed that is not compatible with the passenger air bag module, possibly affecting air bag deployment.
Subaru will notify owners, and dealers will replace the passenger air bag module, free of charge. The recall began February 3, 2020. Owners may contact Subaru customer service at 1-844-373-6614. Subaru's number for this recall is WUX-09.
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
NHTSA ID: 19V910
|SUBJECT:||2016-2017 Outback Replacement|
Airbag Control Module
Subaru is recalling certain 2016-2017 model year Outback vehicles in which an incorrect Airbag Control Module may have been installed as a replacement part. A total of 46 U.S. vehicles may be aff ected by this recall. The repair will involve an inspection of the airbag control module part number and potentially the replacement of the airbag module assembly with the correctly paired part number.
|Model Year||Carline||Production Date Range||Affected Vehicle Count|
|2016-2017||Outback||August 29, 2015 – June 28, 2017||46|
Not all vehicles in the production range listed above are aff ected by this recall. Coverage must be confi rmed by using the Vehicle Coverage Inquiry function on subarunet.com prior to repair. This information is now available.
REASON FOR THIS RECALL:
An incorrect airbag control module may have been installed as a replacement part in certain vehicles. An incorrect combination of airbag control module and passenger airbag module may adversely aff ect the deployment characteristics in the event of a crash necessitating passenger airbag deployment.
In the event of a crash, the passenger frontal airbag may not have the designed deployment characteristics, increasing the risk of injury to an occupant in the front passenger seating position.
DESCRIPTION OF THE REMEDY:
Subaru retailers will verify the part number of the airbag control module installed in the vehicle and replace the airbag module assembly with the correctly paired part number if found to be necessary.
Any vehicles listed in any recall/campaign that are in retailer stock must be:
- Immediately identifi ed.
- Tagged or otherwise marked to prevent their delivery or use prior to repair.
- Repaired in accordance with the repair procedures outlined in the Product Campaign Bulletin
Retailers are to promptly follow the applicable service procedures, to correct all aff ected vehicles in their inventory (used, demo & SSLP). Additionally, whenever a vehicle subject to this recall is taken into retailer inventory necessary steps should be taken to ensure the recall correction has been made before selling or releasing the vehicle.
Please be advised that it is a violation of Federal law for a dealer to deliver a new motor vehicle covered by a recall under a sale or lease until the defect is remedied. Therefore, any Authorized Subaru Retailer failing to perform the applicable service procedures to correct all affected vehicles in their inventory prior to the vehicle being placed in service may be subject to civil penalties of up to $21,000 per violation (i.e., for each vehicle), as provided in 49 CFR §578.6 and will also be in breach of the Subaru Dealer Agreement.
|AIRBAG MODULE KIT||SOA635158|
The replacement passenger airbag module assemblies for the 2015-17 MY Legacy and Outback will be the same part used in 2018MY Legacy and Outback due to discontinuation of the original equipment passenger airbag module assemblies used in 2015-17MY vehicles. The 2018MY Legacy and Outback also utilize a diff erent airbag control module than the 2015-17 MY Legacy and Outback. The 2018MY passenger airbag module assembly is now specifi ed for 2015-18MY vehicles. As a result, whenever installing the 2018MY passenger airbag module on a 2015-17MY vehicle, the airbag control module AND airbag module assembly MUST always be replaced together as a matching set.
Step 1: Inspection: Using the Select Monitor, select: Each System > Airbag > Work Support > ECU Parts Number, to confi rm the part number of the currently installed Airbag Control Module as shown below.
- If the Part Number is 98221AL07B, proceed to Step 2.
- If the part number is NOT 98221AL07B, the vehicle is NOT AFFECTED by this recall. IMPORTANT: Record the ECU part number on the repair order as this will be required for claim submission. Proceed to the CLAIM REIMBURSEMENT AND ENTRY PROCEDURES section and process a claim for Inspection Only.
Step 2: The Service Procedure for replacing the passenger’s side front airbag module utilizes the currently applicable Service Manual steps (excluding Step 2, seat removal) up to and including Step 16. At that point, the instrument panel (IP) should be loosened but NOT removed. The illustration below shows locations of the IP retaining screws. All these screws must be removed before attempting to raise the IP for this repair.
NOTE: On models with rear seat HVAC (air vents on the back of the console box), in addition to an air duct running past the shifter, there is a clip under the storage box on the right side at the base of the IP securing the rear seat area ventilation duct which must be removed Models without rear seat HVAC do not have this clip or the air ducts.
- CAREFULLY remove both “A” pillar trims with a plastic trim tool and disengage the tether clips at the top of each panel. After removing the IP speaker grille, twist / disengage the retaining clip for the wiring harness from the IP as shown in the photos below. Use a trim clip removal tool to disengage the retaining clips for the 2 harness connectors secured to the “A” pillar.
- CAREFULLY release the plastic retaining clips securing the IP wiring harness in the 7 locations shown below using a needle-nosed plier or trim clip removal tool. Use the overall photo ( 1) shown below for clip location reference and the rest of the photos for specifi cs. Releasing these clips provides additional access to get the airbag module past the harness. Fig. 2 shows clip A on a brace adjacent to the airbag module. Figs. 3 and 4 show the same clips (B, C & D) but the photos were taken from diff erent angles.
IMPORTANT NOTE: Since clip D is not accessible from behind to release it and will most likely be damaged during removal, a replacement is included in the box along with the new replacement airbag module.
Fig. 5 shows clip G under the IP top center speaker grille. Figs. 6 & 7 show clips E & F securing the harness to braces in the center of the IP near the storage box below the audio unit and HVAC controls.
The procedure shown below utilizes 2 generic, readily available tie-down straps in place between the IP and the passenger assist handle to hold the right side of the IP elevated while removing and reinstalling the airbag module.
VERY IMPORTANT: Always protect the IP and assist handle from the strap hooks with clean shop cloths (or equivalent). Recommended positions for the hooks are shown in the photos below. Hook location “A” is on the right side of a metal IP support bracket near the center storage box.
- VERY IMPORTANT: When raising the IP, CAREFULLY raise it up ONLY AS FAR AS NEEDED for enough access to remove / reinstall the airbag module. This reduces the chances of damaging the IP and possibly other components caused by raising it too high. Using 2 straps and keeping them equally as tight also helps distribute the IP’s weight and the force required to raise it. Trial and error will determine how high the IP needs to be raised.
- After disengaging the airbag module retaining claws from the IP using a plastic trim stick, CAREFULLY remove the airbag module OVER top of the IP wiring harness.
- Fit the new airbag module to the IP. IMPORTANT: When properly seated and with all the metal retaining claws in place, the module should feel somewhat loose in the IP cavity. If the module is tight in the IP, it is most likely not properly seated. Recheck to make sure all the metal claws on the module are fully protruding through their corresponding holes of the IP cavity. When the IP is back in its proper position, the airbag module’s two 10mm hex bolts will secure it properly in place.
- Reassemble the remaining IP components and related trim parts in reverse order of removal.
- Reconnect the battery and reset the audio (and Navigation Favorites if applicable) presets.
- Start the vehicle. Confi rm the Airbag and all warning lamps cycle off properly to complete the procedure.
- Always record the customer’s audio presets (and Navigation Favorites if applicable).
- Move the shift lever out of the Park position and put the front seats all the way back BEFORE disconnecting the battery. Doing so will make removing the center storage box much easier.
- USE CAUTION when removing the Combination Meter lower visor / fabric cover from the upper steering column cover. DO NOT attempt to remove it from the Combination Meter.
- There is no need to remove the Keyless Access control module.
- CAREFULLY remove the “A” pillar trims and disconnect the tether clips.
- Only the right-side sill trim & kick panel need to be removed.
- If the right-side dash vent becomes displaced while the IP is being raised, CAREFULLY push it back into position when the IP is returned to its proper location.
CLAIM REIMBURSEMENT AND ENTRY PROCEDURES:
Credit to perform this recall will be based on properly completed repair order information. Retailers may submit claims through Subarunet.com.
|Labor Description||Labor Operation #||Labor|
|FRONT AIRBAG INFLATOR- INSPECTION ONLY||A182-038||0.3||WUX-09||RC|
|INCORRECT CONTROL MODULE-AIRBAG COMBINATION R&R||A182-035||3.5|
SERVICE PROGRAM IDENTIFICATION LABEL:
Type or print the necessary information on a Campaign Identifi cation Label.
The completed label should be attached to the vehicle’s upper radiator support. Additional labels are available through normal parts ordering channels. The part number is MSA6P1302, which comes as one sheet of 20 labels.
|Part Number||Applicability||Description||Order Quantity|
|MSA6P1302||All Models||Campaign Completion Labels (contains one sheet of 20 labels)||1|
- SOA strongly discourages the printing and/or local storage of service information as previously released information and electronic publications may be updated at any time.
- Always check for any open recalls or campaigns anytime a vehicle is in for servicing.
- Always refer to STIS for the latest service information before performing any repairs.
IMPORTANT SAFETY RECALL
This notice applies to the VIN below
|SAFETY RECALL NOTICE |
This is an important Safety Recall.
The remedy will be performed at no charge to you.
Recall: WUX-09 NHTSA ID: 19V-910
Dear Subaru Owner:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
You received this notice because our records indicate that you own one of these vehicles.
REASON FOR THIS SAFETY RECALL
An incorrect airbag control module may have been installed when the front passenger airbag module assembly was replaced in your vehicle. The incorrect combination of these two parts may adversely affect the airbag deployment characteristics in the event of a crash necessitating passenger airbag deployment.
In the event of a crash, the passenger frontal airbag may not deploy correctly, increasing the risk of injury to an occupant in the front passenger seat.
WHAT SUBARU WILL DO
Subaru will inspect the airbag control module installed in your vehicle, and if necessary, replace the airbag module assembly with the correctly paired one, at no cost to you.
WHAT YOU SHOULD DO
You should immediately contact any authorized Subaru retailer (dealer) for an appointment to have this safety recall repair performed for free.
Until this repair is performed, do not allow passengers to occupy the front seat.
If you are not the only driver of this vehicle, please advise all other drivers and passengers of this important information.
HOW LONG WILL THE REPAIR TAKE?
The time required for the airbag control module inspection is approximately 20 minutes. However, if it is determined that the incorrect airbag control module was installed, the time required to complete the repair will be approximately 3½ hours. Your retailer can provide you with an estimate of the overall time needed for this service visit, as it may be necessary to make your vehicle available for a longer period of time. To minimize your inconvenience while the repair is being performed, please ask your retailer for alternative transportation options.
Government regulations require that recall notifications be sent to the last known owner of record. That information is based primarily on state registration and title data. If you are a lessor of this vehicle, federal regulations require you to forward this notice to your lessee within ten days.
If you have moved or sold your vehicle, please update this information online at www.subaru.com, select ‘Customer Support,’ then select ‘Address Update’ or ‘Ownership Update’ from the Quick Links menu.
IF YOU HAVE PREVIOUSLY PAID FOR A REPAIR
If you have already paid for repairs associated with this condition, you may be eligible for reimbursement.
Reimbursement consideration will be based on the amount an authorized Subaru retailer in your area would charge for the same repair.
Please send the original service repair order, which has the name of the repair facility, date of repair, mileage at the time of repair, complete 17-digit vehicle identification number (VIN), and your name, with correct mailing address and telephone number to the address listed below.
Subaru of America, Inc.
Customer-Retailer Services Department, Attention: WUX-09 Recall
P.O. Box 9103, Camden, NJ 08101-9877
Please send original receipts only and retain a photocopy for your records. Please be assured that we will attempt to process your reimbursement request as quickly as possible, but it may take up to 60 days for this process to be completed.
IF YOU NEED FURTHER ASSISTANCE:
If you need additional assistance, please contact us directly:
- By e-mail: Go to www.subaru.com and select “Customer Support”
- By telephone: 1-844-373-6614
Monday through Friday between 8:00 a.m. and 7:00 p.m. ET
- By U.S. Postal mail: Subaru of America, Inc.
Attn: Customer-Retailer Services Department
P.O. Box 9103, Camden, NJ 08101-9877
To subscribe to the NHTSA Recall Notification email System, please go to: https://www-odi.nhtsa.dot.gov/nhtsa/subscriptions.
Please contact us immediately if the Subaru retailer fails or is unable to make the necessary repairs free of charge.
You may also contact the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave. SE, West Building, Washington, DC 20590 or call the toll-free Auto Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153) or go to http://www.safercar.gov if you believe the Subaru retailer has failed or is unable to remedy your vehicle without charge within a reasonable amount of time.
Your continued satisfaction with your Subaru is important to us. Please understand that we have taken this action in the interest of your safety and your vehicle’s proper operation. We sincerely apologize for any inconvenience this matter may cause and urge you to schedule an appointment as soon as possible.
Subaru of America, Inc.
a subsidiary of Subaru Corporation
2 Affected Products
10 Associated Documents
Remedy Instructions and TSBRCRIT-19V910-1364
Recall Quarterly Report #1, 2020-1RCLQRT-19V910-8577
Manufacturer Notices(to Dealers,etc)- OWNER NOTIFICATION for Safety Recall WUX-09 – 2016-2017 Outback Replacement Airbag Control Module RecallRCMN-19V910-9857
ISSUED Owner Notification Letter(Part 577)
Remedy Instructions and TSB
Defect Notice 573 ReportRCLRPT-19V910-8023
Manufacturer Notices(to Dealers,etc)- New Safety Recall: WUX-09 – 2016-2017 Outback Replacement Airbag Control Module RecallRCMN-19V910-4386
Recall Quarterly Report #3, 2020-3RCLQRT-19V910-5957
Recall Quarterly Report #2, 2020-2
Latest Recalls Documents
For the most up to date documents from NHTSA for this Recall, click the lick above
NHTSA ID: 19V910
- Advanced Diagnostic Scanner for ECU Programming : MK908P has been designed to perform some of the most complicated engine diagnostics and reprogramming in BMW and Mercedes Benz. With the jbox/J2534 VCI or BMW Ethernet Cable, you can edit the cars performance data, like adjusting RPM, fuel injection, etc. A professional car diagnostics scanner to save time/effort on repairs. Form some of the most complicated engine diagnostics and reprogramming in BMW and Mercedes Benz
- Comprehensive Features : Besides Coding and ECU programming functions, the scan tool supports reprogram keys, Bi-directional control, active test, ABS bleeding, complete capabilities for codes, live data, actuation tests, adaptations, prints out recorded data with Wi-Fi. Warm tips Benz-14 & Chang'an-3 Adapters only for UK version, not US version
- User Friendly : The live data stream displayed the real time PID data from ECU and the displayed data included analog inputs and outputs, digital inputs and outputs and system status information broadcast. The graphic display greatly improved the readability and understandability of above parameters. This is definitely a perfect scan tool for enthusiasts interested in knowing how their car is running
- Easy to Operate : The hardware can equal to a best rank android tablet in the market and that made the whole diagnostic procedure more quickly and precisely. Maxisys platform, cloud-based Maxisys provide a large amount of data about the diagnosis and repair advices, that’s really helpful, whenever you encounter problems, you can find solutions from it
- Compatible with Some Add-ons : Combination with Oscilloscope Maxi Scope MP408 and Digital Inspection Cameras MV108, the power of this tool is amazing and the detail you receive about every component of the vehicle makes pinpointing a problem painless. Affordable combination of MS908P and TS601 supports TPMS programming, which turns into a powerful diagnostic tool.
- 👍【OE-LEVEL】2022 hottest-selling comprehensive diagnostic scanner Autel Maxisys Pro MK908P in US & UK is made for the perfection with perfection, sharing the same OE-level features as expensive factory tools including ECU programming, coding, active test, 30+ service functions, and many more, for 98% vehicle models on the market, but with a much more attractive price tag. The scan tool is an ideal one-stop ultimate solution for large repair shops doing effective automotive diagnostics.
- 👍【ECU PROGRAMMING】As the upgraded version of MS908P and Maxisys Elite, Autel scanner MK908P allows ECU online programming on Benz/BMW, which were previously “dealership” only, to update the existing ECU software for fixing software-controlled issues. Its ECU online coding helps simulate high-end car functions, recognize the new actuators, and more, for better car performance.
- 👍【30+ SERVICE FUNCTIONS】 Oil Reset, EPB, TPMS, BMS, Brake Bleed, DPF, Immo Keys, Injector, SAS, Suspension, Throttle, WIN DR ROOF, Seats, Odometer, Lang Change, Headlamp, CHG Tire Size, TEC Learn, Cylinder, Trans Adaption, Airbag Reset, etc., and still growing. Designed for Professional and locksmiths, MK908P is really a all-in-one top auto scanner.
- 👍【ADVANCED FUNCTIONS】As an added benefit, the J2534 reprogramming box is available for ECU programming on more car models (OEM software required). Advanced functions as Guided Functions (VAG group); Personalization (BMW, Porsche, Toyota); Programmable Module Installation (Ford, Mazda); Power Balance (Chrysler, GM, Ford); Component Matching; Online Parameterization; and Online Account Login Service (VW, Audi, Skoda, Seat) are all packed being a perfect fit for modern automotive maintenance.
- 👍【FREE AUTEL MV108】Autel MaxiVideo MV108, originally pried at 59$, is specially designed to connect with Autel MaxiSys to get the optical image evaluation, detection, and diagnosis. This video scope can perfectly access the desired point of difficult-to-reach car interiors, helping you a lot in repair work with its 640480 Pixel, 8.5mm Diameter, LED Illumination.
- 🚗【Same as MaxiSys Elite, No IP Restriction】: Covering 99% of the vehicle models from 1996 to 2022. Based on the MS908S Pro, Autel MK908P diagnostic scan tool enjoys superior hardware configuration, serves 13 languages with no IP restrictions (MS908S Pro ONLY supports English) Lifetime after-sales service and professional technology support have no difference from offline retail version. Feel free to message us with any problems. Present battery tester AB101 as a gift (worth 49 bucks).
- 🚗【ECU Programming & Coding, Guru for Local Smith】: To broaden vehicle business and increase your revenue, the Autel scanner MK908P assigns advanced ECU programming and coding to 1) customize your car, 2) unfold the hidden features, 3) disable the annoying functions to improve car performance, but also reprogram the adaptive data to certain components after repairs or replacements. The specific operation varies by model.
- 🚗【36+ Service Functions, Best for Repair Shops】: Designed for large-scale garages and equipped with 36+ repair functions, Autel MK908P covers 99% of cars in the market. This make it the most valuable scanner to serve as many cars as possible in your shop. The 36+ functions include Oil Reset, TPMS, ABS Bleeding, EPB, SAS, Injector Coding, BMS, Suspension, etc. Please be noted MK908P programming tool will always keep pace with newer functions and continuous upgrading, never out of date.
- 🚗【High-end Online Functions, OE-level Auto Scanner】: MK908P diagnostic tool explores all the systems and scans hidden DTCs. For quickly locating the fault, active test sends commands directly to vehicle modules to perform specific tests on windows, sunroofs, wipers, relays, injectors, and actuators, etc. Newly launched online functions obtain the online data from the server like online account login service for VW, Audi, Skoda; online configuration for Renault; online coding for Porsche; etc.
- 🚗【Top-end Configuration, Ultra-Fast Speed】: Same functions with MaxiSys Elite, but configured with 2G+64G memory Hexa-core processor, 10.1” screen, and 15000mAh battery to accelerate diagnostics and repair. 2022 MK908P diagnostic scanner offers more to expand the market and raise income for example power balance for Ford, Chrysler, GM; personalization for VW, Audi, Toyota; guided functions for VW, Audi, Skoda; etc.
- 🆚【2022 Elite OE-Level Diagnostic Scanner, Upgrade of X431 PROS V4.0】Launch X431 V+ PRO 4.0 Scan Tool continuous update software and program such as Odometer Write, AutoAuth for FCA SGW, ECU Online Coding Guided Functions, Variant Coding, Maintenance Mode Service Procedures, Ride Height Calibration, Control Unit Reprogramming, Flash Hidden Function, ECU Substitution, Offline Coding, Modification for BMW, Customization and Personalization for worldwide vehicle brands, and keep growing.
- 👍【ECU Coding & Replacement & Online Coding】Launch Scanner X431 V+ supports the ECU replacement function, helps you match, learn, or code the newly replaced ECU. The coding function is used to re-flash the vehicle controlled modules, this diagnostic scanner helps you flash the hidden features, or disable the annoying functions, and reprograms the adaptive data for certain components after repairs or replacements. ECU coding enables multiple car systems to recognize each other.
- 🚗【31+ Reset Functions & AUTO VIN】Launch X431 V+ diagnostic scanner perform 31+ services to meet all your needs. The scan tool is competent to perform ABS Bleeding, IMMO, Injector coding, SAS, BMS, ETS, Oil, TAD, Reset WIN, Power Balance, VGT Learn, Tire Reset, Language Change Fuel System, Light System, and A/C system, etc. And the automotive diagnostic scanner supports one-click Auto VIN to automatically identify the car make, module, and year, saving the hassle of manual operation.
- 🚗【Bi-Directional Scanner & Full Systems Diagnosis for 99.99% Vehicle】This bi-directional scanner can send commands to many systems/components to test working status, without using the vehicle controls LAUNCH scanner can read/erase codes, live data, ECU information, active test, adaptation, matching for all systems, including ECM, TCM, SRS, BCM, TPMS, etc. work on over 150+ US, European and Asian and Malaysia, Indian makes and models up to 2021, Cover OBD1/OBD2/EOBD/JOBD vehicle.
- 🆚【Better Hardware, Wider Regional Vehicle Coverage than X431 V PRO】Same functions as Autel MK906BT obd2 scanner but is faster, As an upgraded scanner of X431 PROS V, LAUNCH X431 V+ scan tool based on Android 9.0 system, 10.1in touch screen,7000mAh rechargeable battery, 3G ROM, 32+128GB(EXTENDABLE) storage, One-Click Wi-Fi free update, 4X faster transmission rate, greatly increased the speed of running multiple tasks. 8XFaster AUTO VIN Technology, Fix bugs, and Update car software to 2021
- As an upgraded version of the MS908P,same function as MS908S PRO and MaxiSys Elite. This superior diagnostic device is awarded as the Best Vehicle Diagnostic Tool in Britain, and characterized by its high-end diagnostic features with easy-to-use operations. It’s an ultimate car scanner for DIYers, experienced mechanics, even garage to finish professional-level vehicle repair and maintenance.
- This top-level OBD2 scanner comes with a SAE J2534-1 & -2 compliant PassThru reprogramming interface device which allows you to use the updated OEM software to replace the existing software/firmware in ECUs, programming new ECUs for Benz/BMW and fixing software-controlled drivability issues and emission issues.
- This Android4.4 based high-end car scanner is designed with the advanced hardware configurations including super-fast hexa-core Processor, 2GM RAM, 64GB On-board Memory, 8.0 Megapixel rear cam, ultra-clear 10.1 inches LED screen etc. for users to detect the problems of the given vehicle efficiently and accurately.
- This diagnostic scan tool is built for testing more than 80 US, Asian and European vehicle makes and you can use it to test more vehicles when you complete the update at our official website once in a while. It is basically a bidirectional scanner that allows you to send and receive data to and from a car’s control modules.
- In order to bring convenience for users to manage all the data and parameters stored in this diagnostic tool, Autel MK908P supports the following user-friendly managing functions: Shop Manager Operation, MaxiFix Operation, Data Manager Operation, etc. to quickly and directly select the required referring information while diagnosing.
- 👍【UPGRADED OF MS906/ DS708, SAME AS MS908S/MK908P】As the upgrade version of MX808 MK808 MK808BT DS708 MP808 DS808 MS906, MS906BT comes with doubled battery capacity(10000 mAh) and German wireless technology, integrades advanced ECU coding (same as MS908S), Bi-directional control, 31+ services, VW/Audi Guided functions, custom settings, All system diagnosis (same as MS908 MK908P), covering 10,000 + car models in the market. Compatible with Autel Add-On, such as MV108 inspection camera(Included).
- 👍【31 SERVICE OPTIONS, 2022 NEW VERSION】 As a professional automotive scanner, Autel MS906BT auto scanner perform various maintenance reset functions like Oil Reset, EPB, SAS, DPF, BMS, ABS bleed, Throttle, Suspension, Injector Coding, Key Fob Coding, Power Balance, Transmission Adaptation, and etc. NOTE: Service options do NOT work on all cars. Send VIN number to 🚘autelofficial @ outlook . com🚘 to check compatibility before purchase. NOTE: MS906BT does NOT have TPMS services.
- 👍【ADVANCED ECU CODING】Same as MaxiSys MS908, workshop level scan tool MS906BT supports advanced ECU coding(not ECU programming) to help mechanics unfold the hidden features or disable annoying functions etc. to suit car owners' customized needs, while MaxiSys MS906 supports rarely of this function. This functions worthing $1000+. Compare with MS906, MS906BT is more powerful, it has the same diagnostic and services functions as maxiSys Elite/MS908(S). A powerful tool for diagnostic & services.
- 👍【BI-DIRECTIONAL CONTROL SAME AS MS908 MK908P,】As one of the most welcomed workshop diagnostic tool, Autel MaxiSys MS906BT features Bi-directional Control, also know as Active Test (worthing $500+), allows users to send commands to the tested ECUs and monitor the activity of the actuators, to make sure every components in working condition. Such as windows up/ down, switch on/off, etc. 👉NOTE: Funtions NOT universal, pls send VIN to 🚘autelofficial @ outlook . com🚘 to check before order.
- 👍【OE ALL SYSTEMS DIAGNOSIS SAME AS MS908S ELITE】 MaxiSys MS906BT is a professional diagnostic scan tool that has the same level to scan available vehicle modules as MS908S/ Elite including ABS, SRS(Airbag), Engine, Transmission, PCM, ECM, EPS, PDM, TPM, BCM, ABS and SCCM and more with complete capabilities for codes, live data, active test, ECU information, adaptation, matching, ECU coding etc. 👉Please send VIN to 🚘autelofficial @ outlook . com🚘 to check before order.
- 【All Vehicle Systems Bluetooth OBD2 Scanner】The Thinkdiag OBD2 Scanner supports all Systems diagnostic function, it can read/clear fault codes, read live data, read control module information, actuation tests and maintenance functions for ECM, BCM, SRS, TCM, BMS, TPMS, SAS, A/C system etc... It can works with most car models after 1996 year of 120+ car brand, All software have 1 year free update. If you met require subscription fee when activation, please contact us with serial number.
- 【15+ Maintenance Functions Adaption / Initialization/ Matching】Thinkdiag OBD2 Scanner has 15 reset functions menu and more maintenance function under the exact car menu: Service Reset, ABS Bleeding, Injector coding, SAS Reset, TPMS Reset, DPF Reset, BMS Reset, ETS Reset, AFS Reset, EGR Adaptation, SUNROOF, SEAT Calibration, Key Coding etc. Thinkdiag is a perfect diagnostic tool for mechanics.
- 【Bi-Directional Test + ECU Coding】Thinkdiag actuates solenoids and actuators for active testing, send commands to systems/components to test their working status, without using the vehicle controls. It saves much time to identify malfunction causes. ECU CODING allows you to match the replaced components with ECU, flash hidden functions for BMW, GM, Benz etc. No matter you are private owner or professional technician, Thinkdiag comes with almost full functions which is a powerful tool for you.
- 【Intelligent Diagnostic Tool with Autovin】Thinkdiag Bluetooth OBD2 scanner makes your smart device become a professional vehicle diagnostic tool, it compatible with android and ios system. Autovin function supports the Thinkdiag identifies most car models automatically. Full system Vehicle health report will be automatically created after diagnosis, report can be shared. Live Data Stream combined Graphing+Data Record better for monitoring vehicle performance and analyze the abnormal parameter.
- 【Prompt Customer Service Via Amazon Message】If you have any problems please contact us via Amazon message, we will offer prompt help. And we guarantee the quality of the Thinkdiag with a 12-month, hassle-free warranty. We always at your service and mostly we reply to you within few hours. Question about car coverage list, please send car's info brand/type/year. Inquiry about device, please attach the serial number. Open our store front-page, click "Ask a question" to get prompt help.
- 🥇【2022 NEW ELITE SCAN TOOL + 26 RESET SERVICES】: LAUNCH CRP909X scan tool is the Upgrade Ver. of LAUNCH Creader VII+/CRP123X/CRP129X/LAUNCH CRP TOUCH PRO ELITE. It provides 26 competitive RESET services to make your repair/maintenance more user friendly. Details are as follows: Oil Reset/ SAS Reset/ EPB Reset/ BMS Reset/ DPF Regeneration/ ABS Bleeding / IMMO /Sunroof Reset/Suspension Reset/ Gearbox Reset/ AFS Headlamp Reset/ Injector Coding/Gear Learning/TPMS Reset/Throttle Adaptation.
- 👍【Newly Added 11 Reset Services from November 2021】The details are AC System Relearn, AdBlue Reset, A/F Reset, Coolant Bleed, Language Change, NOx Sensor Reset, Seats Calibration, Stop/Start Reset, Transport Mode, Tyre Reset, Windows Calibration. 🚩NOTE: If you buy CRP909X now, you may need to update it to get these functions. The update process is easy. After connecting the scanner to WIFI, click the "upgrade" on the menu, and then choose the software you want to update this scanner.
- 🚗【OE-LEVEL FULL SYSTEM AS LAUNCH X431 + SMART AUTO VIN SCAN】 LAUNCH OBD2 SCANNER CRP909X can read ECU VERSION INFORMATION, read/clear DTCs, read LIVE DATA (text & graphic) for all vehicle systems (ABS, SRS, Engine, Transmission, Brake System, Emission System, Fuel system, Light system, TPMS System etc.). With AUTO VIN SCAN, this launch scan tool can obtain the VIN info of the identified vehicle and scan the systems automatically, once the launch scanner and the car are properly connected.
- 🚖【20000+ COMPATIBLE VEHICLES & SMART DIAGNOSTIC REPORT】 This escaner automotriz professional launch crp909x is compatible with over 57 different vehicle brands and 20000+ cars worldwide which are compatible with OBDII, EOBD and JOBD protocols and also supports cars made in 2018/2019/2020. LAUNCH scanner can automatically generates a car diagnostic health report, you can store the data to graph, record, and playback your vehicle’s parameters, and print them by email for further analysis.
- 👍【IMPROVED CONFIGURATION + ONE-CLICK WIFI UPDATE】 This launch obd2 scanner optimized hardware and now comes with ➤7.0 inch IPS capacitive touch screen,a bigger,brighter Screen,display Tons of live data PIDs ➤Android 7.1 Operating System➤6000mAh rechargeable lithium battery, longer running and standby time ➤Larger Memory with 2GB RAM & 16GB ROM ➤real-time battery voltage of 12V vehicles in graphical display. One-Click Update for more functions, bug fixes, and wider vehicle coverage.
- 【25+ MOST POPULAR SERVICES】 Autel Scanner MaxiCOM MK808, one of the most versatile OBDII diagnostic scan tool in the market, is an ideal choice for car shop owners and professional mechanics. With its advanced 25+ hot service functions including Oil Reset, SAS Calibration, Odometer, IMMO Keys (disable lost keys, add new keys), ABS Bleeding, Injector Coding, Battery Registration, DPF Regeneration, etc., and still growing, Autel MK808 ranks top in professional automotive scanners.
- 【DIAGNOSE ALL AVAILABLE MODULES】 Autel MK808 works well on 80+ car makes and models worldwide (1996 and newer), to Read / Clear codes, view Live Data for all available systems using the supported protocols. The detailed report reveals the exact nature of the problem, with possible fixes to help greatly plan the budget for repairs.
- 【IMMO KEYS】OBD2 diagnostic scan tool MK808 is cost-effective with a nice price tag of $475 considering the IMMO feature that it offers. Each time you lose the key, Autel Maxicom MK808 can add the new key and remotely disable the lost one. *ONLY available for Asian vehicles with low-grade anti-theft systems.
- 【Runs Fast & AUTOVIN】Skip those often very expensive OE-level scanners, the affordable MK808 presents a rich bag of features for you to enjoy. The AutoVIN technology can straightforwardly get detailed info of the car, ranging from engine type to where it was manufactured, with just a single touch. The combination of MD802 and MaxiCheck Pro, with an A9 processor, 7-inch LCD touch screen and 64G memory ensures you the maximum speed of diagnosis and convenience of quick operation.
- 【2022 LATEST VERSION】 This original Autel scanner is backed up by Autel official after-sale services with 1-year warranty, available 30-days return & replacement policy, and 24/7 thoughtful support. We, the authorized Autel seller, provide you with 2022 newest original MK808 with reliable quality.
- 💪 【2022 NEWEST ALL-IN-ONE SERVICE TOOL】XTOOL D7 automotive diagnostic scanner performs extensive services & special functions like Active Tests, Oil Reset, EPB, SAS, DPF, BMS, Throttle, Air Suspension, Injector Coding, IMMO Key Programming, ABS Auto Bleed, transmission Reset, throttle adaptation, Refresh hidden functions and etc. NOTE: All Special functions do NOT work on all cars. Send VIN number to Xtooldirect @ outlook. com to check compatibility before purchase!
- 💪 【BI-DIRECTIONAL CONTROL】 XTOOL D7 possess the ability to send commands to components to test the working status, without using the vehicle controls. It can read/erase codes, view live data, freeze frame, retrieve ECU info, do active test for all components like Fuel Trim Reset, Fuel Composition Reset, fuel pump, valves, wipers, window, door, sunroof, headlamps, etc. Helping mechanics/technicians to quickly locate the bad parts on the cars.
- 💪【OE-LEVEL ALL SYSTEMS DIAGNOSTIC + LIVE DATA + AUTO VIN SCAN】Configurating the latest VIN-based Auto VIN & Auto Scan, D7 professional scan tool can easily access and diagnose all available modules on a wide range of vehicles, including PCM, ECM, EPS, PDM, TPM, BCM, TPMS, SAS, Fuel System, Light System and A/C system, etc to read and clear codes, view live data like transmission fluid temperature, cylinder balance rates, engine rpm, etc, freeze frame, perform active tests, read ECU info.
- 💪【COMPLETE MAINTENANCE FUNCTIONS MEET YOUR NEEDS】 XTOOL D7 car diagnostic scanner comes with 28+ service functions including: Oil Reset, EPB Reset, SAS Calibration, DPF Regeneration, TPMS Reset, ABS Auto Bleed, Battery Registration, Throttle Reset, Injector Coding, Power Balance, IMMO Key Coding, Suspension Calibration, Transmisson Adaptation, Headlamps etc. NOTE: Please send VIN number to Xtooldirect @ outlook. com to check compatibility before order.
- 💪【COST-EFFECTIVE KEY PROGRAMMING】XTOOL D7 car key programming tool can perform various IMMO functions like programming new fob key, make dealer key, Add extra new key, Remote learning, Key matcing/learning, smart key reading for specific vehicles. Note: This function vary across vehicles. CAN NOT work for VW/BMW/BENZ or for Toyota smart key All key losst. Please confirm with us compatibility first with your car VIN.
Last update on 2022-01-18 / Affiliate links / Images from Amazon Product Advertising API
Last update on 2022-01-18 / Affiliate links / Images from Amazon Product Advertising API