| “This site contains affiliate links for which OEMDTC may be compensated” |
NUMBER: 07-90-15
DATE: 04/22/15
| APPLICABILITY: | 2015MY Legacy and Outback Models with Subaru Rear Vehicle Detection (SRVD) System |
| SUBJECT: | DTC B2350 for SRVD System |
INTRODUCTION
This bulletin provides a new repair procedure for when the SRVD warning lamp is illuminated and DTC B2350 is stored in memory. The cause has been identified as a communication error between the SRVD radar units and the CAN transceiver triggered by a voltage drop which occurs during engine cranking.
COUNTERMEASURE IN PRODUCTION:
New radar assemblies have been incorporated into production starting with the following VINs:
Legacy: F3062279
Outback: F3328383
PART INFORMATION:
| PART NUMBER | DESCRIPTION |
|---|---|
| 87611AL00B | RADAR AY BACK AND SIDE |
The radar assembly part number is the same for both left and right-hand units.
SERVICE PROCEDURE / INFORMATION:
Follow the Service Manual diagnostic procedure for B2350. Once the related harness and connector checks have been completed and all are confirmed to be OK, replace BOTH SRVD system radar sensors as a set following the procedure outlined in the applicable Service Manual.
WARRANTY / CLAIM INFORMATION
For vehicles within the Basic New Car Limited Warranty period or covered by a Subaru Added Security (SAS) Gold / Gold Plus plan, this repair may be claimed using the following information:
| LABOR DESCRIPTION | LABOR OPERATION # |
FAIL CODE |
LABOR TIME |
|---|---|---|---|
| SRVD UNIT BOTH (MASTER & SLAVE UNITS) R&R | B067-804 | ZQJ-43 | 0.6 |
| SUBARU REAR VEHICLE DETECTION SYSTEM DIAGNOSIS | C067-800 | 0.4 | |
| SRVD TARGET POSITION ADJUSTMENT BOTH SIDES | C067-838 | 0.8 |
REMINDER: SOA strongly discourages the printing and/or local storage of service information as previously released information and electronic publications may be updated at any time.
Always refer to STIS for the latest service information before performing any repairs.
Loading...
Reload document 
Open in new tab
