“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10173129
Manufacturer Communication Number: 07-172-20
Summary
This bulletin announces availability of new headlamp assemblies which include the following enhancements: (1) Additional ventilation added for optimized temperature control inside the headlamp housing. (2) The added temperature control enhances performance of the anti-fogging coating on the inside of the headlamp lens, improving its resistance to prolonged high temperature / humidity conditions.
2 Affected Products
Vehicle
MAKE | MODEL | YEAR |
---|---|---|
SUBARU![]() | BRZ | 2017-2018 |
NUMBER: 07-172-20
DATE: 03/20/20
APPLICABILITY: | 2017-18MY BRZ |
SUBJECT: | Headlight Anti-Fog Enhancements for High Heat and Humidity |
INTRODUCTION:
This bulletin announces availability of new headlamp assemblies which include the following enhancements:
- Additional ventilation added for optimized temperature control inside the headlamp housing.
- The added temperature control enhances performance of the anti-fogging coating on the inside of the headlamp lens, improving its resistance to prolonged high temperature / humidity conditions.
- The material used for the ventilation opening caps (sponges) has been changed.
- The end rubber portions have been changed to enhance their appearance and fit between the headlamp and bumper cover.
- The end rubbers have also been made available t order as separate components.
PRODUCTION CHANGE INFORMATION:
The new head lamp assemblies were incorporated into production starting with VIN J9602352.
PART INFORMATION:
Description | Part Number | Application |
LENS & BODY-HEAD LAMP | 84913CA402 | RIGHT SIDE |
84913CA412 | LEFT SIDE | |
LAMP ASSEMBLY-HEAD | 84002CA382 | RIGHT SIDE |
84002CA392 | LEFT SIDE | |
END RUBBER-HEAD LAMP | 84942CA020 | RIGHT SIDE |
84942CA030 | LEFT SIDE |
REMINDER: Always order the most up-to-date replacement parts based on the specific VIN being repaired.
SERVICE PROCEDURE / INFORMATION:
REMINDER: Customer satisfaction and retention starts with performing quality repairs.
The service procedures for head lamp replacement remain unchanged. Always refer to the applicable Service Manual and review the full requirements of the repair being performed. The Service Manual procedures contain information critical to performing an effective repair the first time and every time.
WARRANTY / CLAIM INFORMATION:
For vehicles within the Basic New Car Limited Warranty period or covered by an active Subaru Added Security Classic or Gold plan, this repair may be submitted using the following claim information:
Labor Description | Labor Operation # | Labor Time | Fail Code |
HEADLIGHT ASSEMBLY R&R- ONE SIDE | A916-143 | 0.6 | XFU-78 |
HEADLIGHT ASSEMBLY R&R- BOTH SIDES | A916-144 | 0.7 |
IMPORTANT REMINDERS:
- SOA strongly discourages the printing and/or local storage of service information as previously released information and electronic publications may be updated at any time.
- Always check for any open recalls or campaigns anytime a vehicle is in for servicing.
- Always refer to STIS for the latest service information before performing any repairs.
NUMBER: 07-172-20
DATE: 03/20/20
- 【100% OE Fitment】Perfect fitment for OE Type 2010 2011 2012 2013 2014 Subaru
Legacy / 2010 2011 2012 2013 2014 Subaru
Outback,𝐎𝐄𝐌:𝟖𝟒𝟎𝟎𝟏-𝐀𝐉𝟎𝟏𝐂/𝟖𝟒𝟎𝟎𝟏-𝐀𝐉𝟎𝟎𝐂
- 【200% Brighter】High transmittance PC lens with UV coating; excellent durability and ultra-clear vision
- 【Easy to Install】Plug-n-Play style; no modification needed
- 【Water-Proof】IP65 certified quality with watertight seal; heavy-duty housing; safe driving in the rainy season
- 【Lifetime Service】Guaranteed quick response to all your questions; life-long service for each purchase
- 【SUITABLE MODELS】Headlights Assembly Compatible With 2010-2014 Subaru
Outback / Legacy. Bulbs are not included. High Beam: 9005, Low Beam: H7, signal light: 7444NA, Side Marker Light: LED.
- 【PREMIUM DESIGN】The special surface coating makes the lens scratchproof in compliance with DOT & SAE regulations; Plug-n-play operation, direct original equipment replacement for the stock unit; Fully sealed, waterproof, dust resistant and corrosion resistant
- 【VISIBILITY HIGHER & DRIVING SAFER】This headlight helps to increase the brightness so you can see the road clearly at night or in extreme weather. Better visibility can help you avoid traffic accidents and make your driving safer
- 【REPLACEMENT】OEM Part Number: 84001AJ01E 84001AJ00E; Partslink Number: SU2502136 SU2503136
- HIGH PERFORMANCE AND VALUE: The performance choice for safety-conscious drivers, VisionPlus headlight bulbs offer high-performance and excellent value. VisionPlus is the right choice for today's demanding drivers.
- UP TO 60% MORE VISION FOR A SAFER DRIVE: Philips VisionPlus headlight bulbs allow drivers to see father for greater safety and comfort by producing up to 60% more vision. (When compared to standard requirements in low beam tests results.)
- OEM QUALITY AND DOT COMPLIANT: VIsionPlus bulbs meet the Department of Transportation requirements. Choosing original equipment bulbs reduces the chance of early failure thanks to their higher quality standards.
- CONFIRM FIT: When using the Amazon part finder, be sure to confirm the POSITION and NOTES provided. For some vehicles, bulbs may fit some positions (fog light, low beam, high beam, or high/low beam), but not all. The POSITION and NOTES ensure Exact Fit! AVAILABLE IN: 9003, 9004, 9005, 9006, 9007, 9008/H13, H1, H3, H7, H11
- ALWAYS REPLACE IN PAIRS: At the end of their life, lamps project less light, therefore reducing visibility. When changing a headlight bulb, it's best to change in pairs to ensure a symmetric light beam from both bulbs on the road. When installing a new bulb, never touch the glass. Either use gloves or paper towel when handling.
- Comes in a Pair, Which Means Included Left Side (Driver Side) & Right Side (Passenger Side)
- OE Design For Direct Fit, Form And Function For An Simple And Fast Installation
- No Installation Guide or Instruction Included Professional Installation is Highly Recommended
- New Trend Projector Headlight Design, Provide Better Light Pattern Than Traditional Crystal Headlights; LED Light Tube are made with the best materials and precisely illuminate with Ultra-Bright SMD LED chips
- DOT (Department of Transportation) & SAE (Society of Automotive Engineers) Approved; Wiring Modification Might Be Needed On Halo And LED Connection, Please Check With Local Professional Mechanic
- 🚗【FITMENT】Headlight Assembly Compatible With 2010 2011 2012 2013 2014 Legacy / Outback. Bulbs are not included. High beam bulb type: 9005; Low beam bulb type: H7. OEM Part Number: 84001AJ00A, 84001AJ01A; Partslink Number: SU2503136, SU2502136
- 🚙【WATERPROOF】Meets SAE & DOT Standards. Fully sealed with solid silicone and designed with one-way vents to keep moisture from trapping inside the case, no need to worry about corrosion or moisture in all weather conditions
- 🛠【IMPACT-RESISTANT & TOUGH】Constructed with durable polycarbonate lenses that provide excellent protection from road debris abuse and the impact of branches on the trail, the high-impact shell also better withstands the shock and vibration of off-road adventures
- 💡【BRIGHTER LIGHTING & SAFETY REFLECTOR】Metal parabolic reflectors provide more light output for wider, smoother beams. Side microprism reflectors let oncoming vehicles or passersby quickly notice you at night, keeping you and others safe while driving
- 🚦【DIRECT REPLACEMENT】Plug-n-play installation. Direct Bolt-On OE Fitment or Replacement for the Stock Unit; Requires No Modification or Drilling. Installation instruction is not included. Professional installation would be highly recommended. Comes in pairs with both Driver (Left) & Passenger (Right) side
- Only Lens and Housing Included; Driver & Passenger Side
- Smoked Lens Obstructs Light Output | Off-Road Use Only
- Replacement for Stock Assembly; Lenses Ensure Full illumination and Maximum Safety
- Installation Instruction Not Included; Recommend Install By a Qualified Individual; Signature May Be Required For Delivery
- 30 Days Return Policy
- 🚗【FITMENT】Headlight Assembly Compatible With 2014 2015 2016 Subaru
Forester. Fit for Factory Halogen Models Only. Not Fit for HID Models. Bulbs are not included. High beam bulb type: 9005; Low beam bulb type: H11. OEM Part Number: 84001SG091, 84001SG081; Partslink Number: SU2502145, SU2503145
- 🚙【WATERPROOF】Meets SAE & DOT Standards. Fully sealed with solid silicone and designed with one-way vents to keep moisture from trapping inside the case, no need to worry about corrosion or moisture in all weather conditions
- 🛠【IMPACT-RESISTANT & TOUGH】Constructed with durable polycarbonate lenses that provide excellent protection from road debris abuse and the impact of branches on the trail, the high-impact shell also better withstands the shock and vibration of off-road adventures
- 💡【BRIGHTER LIGHTING & SAFETY REFLECTOR】Metal parabolic reflectors provide more light output for wider, smoother beams. Side microprism reflectors let oncoming vehicles or passersby quickly notice you at night, keeping you and others safe while driving
- 🚦【DIRECT REPLACEMENT】Plug-n-play installation. Direct Bolt-On OE Fitment or Replacement for the Stock Unit; Requires No Modification or Drilling. Installation instruction is not included. Professional installation would be highly recommended. Comes in pairs with both Driver (Left) & Passenger (Right) side
- 🚗【FITMENT】Headlights Assembly Compatible With 2009-2013 Subaru
Forester. Bulb is NOT included. High beam bulb type: 9005; Low beam bulb type: H11. OEM Part Number: 84001SC061, 84001SC071
- 🚙【WATERPROOF】Meets SAE & DOT Standards. Fully sealed with solid silicone and designed with one-way vents to keep moisture from trapping inside the case, no need to worry about corrosion or moisture in all weather conditions
- 🛠【IMPACT-RESISTANT & TOUGH】Constructed with durable polycarbonate lenses that provide excellent protection from road debris abuse and the impact of branches on the trail, the high-impact shell also better withstands the shock and vibration of off-road adventures
- 💡【BRIGHTER LIGHTING & SAFETY REFLECTOR】Metal parabolic reflectors provide more light output for wider, smoother beams. Side microprism reflectors let oncoming vehicles or passersby quickly notice you at night, keeping you and others safe while driving
- 🚦【DIRECT REPLACEMENT】Plug-n-play installation. Direct Bolt-On OE Fitment or Replacement for the Stock Unit; Requires No Modification or Drilling. Installation instruction is not included. Professional installation would be highly recommended. Comes in pairs with both Driver (Left) & Passenger (Right) side
- Fitment- Replacement for Subaru
Forester 2006 2007 2008 headlights
- Quality Control- Products must pass strict quality control in the production, then a final product inspection before shipment
- Easy to Install- No need additional hardware. Plugs right into the existing wiring harness for a fast installation
- Packing List- Only lens and housing Included, set driver and passenger side, the headlight assembly is made up of high-quality ABS plastic, so that it has better wear, aesthetics, which improves the over all look of the car
- Part Number- 84001SA471 84001SA461
Last update on 2025-05-09 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.