“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10188186
Manufacturer Communication Number: Subaru Retailers
Summary
The following special tool is being shipped directly to all Subaru retailers during February as kit SOA321132.
To: | All Subaru Retailers |
From: | Subaru of America, Inc. – Service Department |
Date: | February 18, 2021 |
Re: | Special Service Tool Shipment: SOA321132 Engine Support Fixture Adapters |
The following special tool is being shipped directly to all Subaru retailers during February as kit SOA321132. This is an essential tool and is available separately using part number J-28467125A. This tool is required for use in servicing Subaru vehicles.
Please reference the Service Information Bulletin 14-27-2 for further information about the use of this tool.
Retailer cost of this tool kit is $78.29. It will be invoiced by SOA on the retailer’s AR statement.
Illustration | Tool Number | Description |
J-28467-125A | Engine Support Fixture Adapters | |
J-28467-125A Contents | ||
J-28467-93A | Includes 6 Support Nuts | |
J-28467-99 | Includes 6 Bolts |
Essential Special Service Tool Storage System Location: Overhead Tool Storage
If you have questions, please contact Subaru Service Operations at serviceoperations@subaru.com.
1 Affected Product
Vehicle
MAKE | MODEL | YEAR |
SUBARU | SUBARU | 9999 |
1 Associated Document
Manufacturer Communications
Date: February 18, 2021
Re: Special Service Tool Shipment: SOA321132 Engine Support Fixture Adapters
https://www.nhtsa.gov/recalls?nhtsaId=10188186
MC-10188186-0001.pdf 422.259KB
“This site contains affiliate links for which OEMDTC may be compensated” |
- STURDY & DURABLE - The SPECSTAR engine support bar is made of high-quality steel with a protective powder-coated finish, which is in high rigidity and wear-resistant; The heavy duty materials are reliable that can decrease the loss and ensure safe operation and prolonged usage
- STRONG LOAD CAPACITY - This transverse bar can carry up to 1100 lbs. that is suitable for lifting up and down of almost all types of car engines including sports cars, SUVs, sedans, and so on; It can precisely locate and support the engine, making repair and clean become easier
- ACCURATE FINE-TUNING HEIGHT - The lifting height of 2 rotating hoists on the engine holder bar can be adjusted from 0 to 7.9 inches, and it is available to maintain altitude for a long time; Equipped with a knob and stable triangular base on each side, the range between the 2 bases can also be changed from 21 to 59.1 inches, so it applies to vehicles that width is less than 59.1 inch
- PREMIUM FEATURES - The overall dimension of this solid engine brace is 59.1” (L) x 8.7” (W) x 7.9” (H); It comes with double strong iron chains that ensure the safe landing of the motor, which is handy for doing engine mounting; The non-slip thickened rubber feet on the bottom of the triangular base can effectively reduce noise when moving and prevent scratches on the car
- EASY TO OPERATE - First, place black triangle support bases in the appropriate position, then fasten the engine with iron chains, and turn rotating hoists to raise or lower the motor to the proper height based on your needs; Designed with rubber materials on round knobs and hoist handles, which can protect your hands in use
- 【1100LBS LOAD CAPACITY】- Holding capacity: 1100 lbs. This engine support bar can precisely position and support the engine while working on the transmission or holds the transmission in place while removing the engine for rebuilding.
- 【HEIGHT ADJUSTABLE】- The maximum lifting height of the engine transverse bar is 7.87 inches for easy repair and clean the engine. Turn the handle to raise or lower the motor at the proper height according to your requirements.
- 【TWO TRIANGLE SUPPORTS】 - Two black triangular supports on the beam are adjustable. You can place them in the appropriate position. The width of the beam is 59.06 inches, so the engine support bar is suitable for vehicles with a width of fewer than 59.06 inches.
- 【STURDY & DURABLE】- The engine hoist includes two iron chains to bind the engine for security landing. The engine support bar is made of heavy-duty steel with a protective powder coat finish, high rigidity, and resistance.
- 【WIDE APPLICATION】- This transverse engine support bar is suitable for lifting and down almost all types of car engines, including sports cars, SUVs, sedans, and so on.
- Two 14 inches adjustable hook screws
- Width expands from 38 inches to a full 61 inches
- 700 pounds capacity adjustable transverse bar
- Two 38 inches braided steel cables 1/8 inch diameter included
- Engine support bar has a 1100 pounds capacity
- Adjustable width of 57 inch x 27 inch
- Features two hook assemblies for ease of use and tubular steel construction for long life
- Rubber padded support legs ensure stability during use
- Comes with two 36 inch chain assemblies
- 700lb capacity, with adjustable width from 40 inches to 54 inches
- Center support screw has a travel of up to 12 inches
- Adjustable extension arms with protective feet straddle the inner fender wells
- Colored to help keep your drums organized
- Country of Origin:China
- Package length:40.5"
- Package width:6.0"
- Package height:5.0"
- Auto & Truck Maintenance
- Country of manufacture: China
- Manufacturer: OTC
- PVC-coated support legs
- Mounts on the shock strut towers to support engines
- Heavier engines can be supported by using one or both front support adapters on the transverse support bar
- Item Package Dimension: 17.0" L x 17.0" W x 17.0" H
- Item Package Weight: 57.0 lb
- 1100 LBS CAPACITY ENGINE SUPPORT BAR - For precisely position and support the engine while working on the transmission or holds the transmission in place while removing the engine for rebuilding.
- 2 THICKEN CHAINS - Includes two chains to bind the engine for safe landing. Tightly welded not easy to break, the angled hooks for a secure hold.
- STABILITY & DURABILITY - Solid steel construction and coated with rust-resistant paint for long-lasting performance and exceptional strength.
- ADJUSTABLE WORKING RANGE - Equipped with knobs on each side and stable triangular bases, the range between the 2 bases can be adjusted; you can place them in the appropriate position.
- WIDE APPLICATION- This transverse engine support bar is suitable for lifting up and down of almost all types of car engines including sports cars, SUVs, sedans, and so on.
- 【1,100Lbs Weight Capacity】This engine support bar has a 1,100 pounds capacity and it weighs 32Lbs.
- 【Durable Construction】The main construction is made of heavy duty steel with powder coat paint finish which ensures long term durability. The end of the long handle is made of plastic which make it more comfortable to use.
- 【6 Sizes of Punches to Choose】It has 6 dies and punches of different sizes to meet different needs for different engine sizes.
- 【2 Chains Included】The package includes two chains to bind the engine for safe landing.
- 【Size Info】Overall Dimensions: 59" (W) x 9.5" (D) x 12.5" (H).
Last update on 2024-06-08 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.