Front Strut Dust Cover Design Change – 2017-2021 Subaru Impreza

“This site contains affiliate links for which OEMDTC may be compensated”

NHTSA ID Number: 10188175

Manufacturer Communication Number: 05-82-21

Summary

This bulletin announces a design change made to the front strut dust cover to address a rubbing-type sound.

 


NUMBER: 05-82-21
DATE: 02/15/21

INTRODUCTION:

This bulletin announces a design change made to the front strut dust cover to address a rubbing -type sound concern. The inner diameter of the lower portion of the cover may interfere with the strut assembly stopper plate while driving when the strut compresses and cause the sound.

 

PRODUCTION CHANGE INFORMATION:

The new Dust Covers were incorporated into production starting with the following VINs:

  • 4-Door Models: M3603755
  • 5-Door Models: M3707901

 

PART INFORMATION:

The part number for the new Dust Cover is 20322FL00B.

REMINDER: Always order the most up-to-date replacement parts based on the specific VIN being repaired.

 

SERVICE PROCEDURE / INFORMATION:

REMINDER:  Customer satisfaction and retention starts with performing quality repairs.

The service procedures for servicing the front strut assembly remains unchanged.  Always refer to STIS and review the full requirements of the repair being performed.  The Service Manual procedures contain information critical to performing an effective repair the first time, every time.  This includes but is not limited to important SAFETY precautions, proper inspection criteria, necessary special tools, required processes and related one-time-use parts needed for a complete and lasting repair.

 


5 Affected Products

Vehicle

MAKE MODEL YEAR
SUBARU IMPREZA 2017-2021

 


1 Associated Document

Manufacturer Communications

NUMBER: 05-82-21
DATE: 02/15/21

https://www.nhtsa.gov/recalls?nhtsaId=10188175

MC-10188175-0001.pdf 1073.942KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [1.02 MB]

 


 

“This site contains affiliate links for which OEMDTC may be compensated”
Bestseller No. 1
TRQ Front Control Arm Ball Joint Sway Bar Link Tie Rod Steering Suspension Kit 6pc Compatible with 2009-2013 Subaru Forester 2011-2014 Impreza
  • Direct Fit, OE Replacement Suspension Kit
  • Kit Includes: (2) Front Lower Control Arms with Ball Joints; (2) Front Sway Bar Links; (2) Front Outer Tie Rods
  • Vehicle Specific: Check fitment information in the listing for compatibility
  • OE Reference Number(s): 20202SC000,20202SC002,20202SC010,20202SC011,20202SC012,20202SC013,20470SA000,20470SA001,34141AC0109E,34161SA000
  • Aftermarket Reference Number(s): 1015179,20202SC000,20202SC002,20202SC010,20202SC011,20202SC012,20202SC013,20470SA000,20470SA001,34141AC0109E,34161SA000,524783,524784,CMS801051,CMS801052,ES3692,ES3712,K750049,MES3712,MS80811,RK622787,RK622789,SUS04827,SUS06139,SUS06140,SUS06771,SUS07625
SaleBestseller No. 2
FEIDKS 698-221 Front Left Driver Side Suspension Steering Knuckle Compatible with Subaru Forester Outback/Impreza Legacy/XV Crosstrek
  • ▶Compatible with◀:Subaru Outback 2005-2014, Impreza 2008-2014, Forester 2009-2014, Legacy 2005-2014, XV Crosstrek 2013-2014. Please use enter your vehicle in your Amazon Garage above to see if this part is compatible with your vehicle.
  • ▶Replace Part Number◀:28313AG010, 28313AG01A, 28313AG030, 28313AG03A, 28313AG03B, 698-221.
  • ▶Reliable Fit◀:Same size design as the original steering knuckle. Can match your vehicle well. Inspected before leaving the factory. Reliable quality assurance.
  • ▶High Quality◀:The steering knuckle is made of high-strength material with good durability and corrosion resistance, long service life.
  • ▶Note◀:This auto-part does not come with a sensor and installation manual;professional installation recommended.1 year warranty, buy with confidence!
Bestseller No. 3
Dorman 523-232 Front Lower Rearward Suspension Control Arm Bushing Compatible with Select Subaru Models
  • Direct replacement - fits and performs like the original equipment bushing on specific vehicles
  • Reliable fit - precision-engineered to match the design and dimensions of original components
  • Durable construction - manufactured to strict standards using sturdy, safe materials
  • Rigorously tested - thorough quality control measures ensure longevity
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
Bestseller No. 4
Detroit Axle - Front and Rear Struts Lower Control Arms + Sway Bars Tie Rod Suspension Kit Replacement for 2009-2013 Subaru Forester - 12pc Set
  • Replacement for 2009-2013 Subaru Forester Naturally Aspirated
  • Kit Includes: 2x Front Strut + 2x Rear Strut + 2x Front Lower Control Arm + 4x Front and Rear Sway Bar + 2x Front Outer Tie Rod
  • Detroit Axle Strut Assemblies are complete and ready for installation with no additional work or special tool required for installation
  • Undergo impact, wear, and fatigue testing to help ensure quality and durability
  • 10-Year Warranty
Bestseller No. 5
TUCAREST 4Pcs Suspension Kit Front Lower Control Arm and Ball Joint Compatible With Su-baru 09-13 Forester,11-14 Impreza WRX [# 524-783 524-784 K9513 20202SC010 20202SC000 20206AJ000]
  • Premium Quality:Made following stringent OE specifications by an OE manufacturer.Each control arm undergo strict quality control not just before shipping but throughout the production process.During each step of production multiple quality control checks are performed to ensure a long,Trouble-free service life.
  • Perfect Fit:Engineered and tested to match the fit,function and performance of the original control arm on specified vehicles.Easy to install by direct replacement.
  • Upgraded Durability:At TUCAREST,We application engineer,design,manufacture and test all of our products to meet or exceed OEM equivalent parts in terms of aesthetics and performance.
  • Cost-effective:We are a factory direct sales.Customers can spend a small amount of money and get higher quality Control Arm.
  • PLEASE NOTE: Before placing the order, please check your car model in the Amazon Fitment Filter System in the top left corner,Do not count on year make and model only,please view compatability tab including the notes,or send us a message to make sure it matches exactly.
Bestseller No. 6
Rear Suspension Link Bushing OEM 20254AE020 apply to Subaru Legacy Outback 1998-2019 Forester 2007-2019 XV 2011-2017
  • 【High Quality】Professional installation is recommended, OEM standards, 100% tested before shipping.
  • 【Condition Note】OE Number:20254AE020.
  • 【Compatibility】Compatible with Subaru Forester, Outback, Legacy, XV .
  • 【Reference Part Number】Use Position: Rear axle pull arm.
  • 【Quality Assurance】Our products are checked in detail before shipment to ensure that they are durable. If there is any problem with the item, please contact us first so that we can make the right treatment.Please see if the product is suitable for your model.
Bestseller No. 7
SCITOO 10pcs Suspension Kit Front Inner Outer Tie Rod End Lower Ball Joints Front Rear Sway Bar Links Fit 2000-2004 For Subaru Outback For Subaru Legacy
  • Suspension Kit Fitment】 2000 2001 2002 2003 2004 For Subaru Legacy;2000 2001 2002 003 2004 For Subaru Outback;
  • Suspension Kit Include】(2) ES3712 Front Outer Tie Rod End; (2) EV473 Front Inner Tie Rod End; (2) K80426 Rear Sway Bar End Link; (2) K80693 Front Sway Bar End Link; (2) K9513 Front Lower Ball Joint;
  • 【When To Replace Suspension Kit】 ①Steering Noise Sounds When Turning ②Feeling Every Bump ③Difficulty When Steering
  • Suspension Kit Buyer's Guide】 A Complete Suspension Kit Typically Includes Control Arms, Idler Arm, Pitman Arm, Tie Rod Ends,Sway Bar Links And Ball Joints.All Of Our Suspension Parts Have Been Pregreased Before Delivery, Will Require No More Additional Work.
  • 【Note】 Scitoo Auto Provide Suspension Kits For Most Cars,Suvs,Trucks And Trailers.⚠ Please Carefully Select Your Vehicle (Year/Make/Model/Trim )In The Top Left Corner Of The Page To Confirm Compatibility,Or Refer To The Vehicles Information In Description.
Bestseller No. 8
AUQDD 2Pc K9513 Suspension Front Lower Ball Joint Compatible With 03-06 Sub-aru Baja,16-22 Crosstrek,98-18 Forester,93-16 Impreza,90-19 Legacy,00-19 Outback (Replace # 20206AJ000 21067GA050)
  • 【OE Quality】 - Manufactured in ISO9010 certified facility,Made with high strength steel tubing with solid plate mounting brackets for superior strength and durability.Each part is built to stringent OE specifications.Stable characteristics,High reliability.
  • 【FEATURES】 - Each control arm assembly is designed for specific application,All parts are assembled in a fully automatic shop to hold the tightest engineering tolerance and to achieve the perfect OE fit.Rigorously tested for secure and sustained performance by team of skilled engineers.Including the application of specific heat treatment hardware.
  • 【Precise fit】 - All parts are pre-assembled.It can be installed easily without using complicated tools.Tolerances to directly replace the original part on certain vehicle years,Makes and models.
  • 【Cost-effective】- We are a factory direct sales.Customers can spend a small amount of money and get high quality Brand new Control arm.It not only makes your car safer on the road but also gives you a more pleasant and smoother driving experience.
  • 【Please Note】 - Before placing the order,please check your car model in the Amazon Fitment Filter System in the top left corner,Do not count on year make and model only,view compatability tab including the notes.Any problem please free to contact us and you will get a satisfactory solution.
Bestseller No. 9
BoardRoad 4PCS Front Lower Control Arms Assembly Suspension Kit Fits 2014-2018 Subaru Forester w/Ball Joints, 2 Sway Bar End Links Protective Rust-Inhibitive Coating Direct Fit
  • 【Vehicle Fitment】:Direct Replacement Compatible with 2014 2015 2016 2017 2018 Subaru Forester.
  • 【Package Includes】:1x Front Lower Control Arm w/Ball Joint Assembly - Driver Side - K622857; 1x Front Lower Control Arm w/Ball Joint Assembly - Passenger Side - K622856; 2x Front Stabilizer Sway Bar End Links - Driver & Passenger Side - K750084
  • 【Improve Ride Comfort】: Bushings made from premium materials effectively help reduce the road noise and vibration, enabling you to enjoy a smooth and controlled ride during cornering and over bumps.
  • 【Rust- and Corrosion-proof】: In order to effectively prevent rust & corrosion and reduce wear, the front suspension kit adopts the pre-greased ball joints and protective electrophoretic paint.The superior steel body and rubber bushings buffer vehicle’s vibration and lower noise well.
  • 【Direct Fit】All the Parts Needed in One Kit.The front suspension kit must be installed by professionals who must pay attention to including but not limited to the installation note shown in the web page.
Bestseller No. 10
TRQ Front Steering & Suspension Kit Compatible with 2005-2009 Subaru Legacy Outback
  • TRQ products are covered by a 2-year / 24,000-mile warranty. Warranties cover the cost of products only and do not cover any damage, labor, or any other inconveniences incurred.  
  • Reference Number(s): 1015179,1033073,20202AG00A,20202AG01A,20202AG02A,20202AG02B,20202AG02C,20202AG02D,20202AG03A,20202AG03B,20202AG03C,20202AG03D,2606947,2606948,34141AC0109E,4553512070,522235,522236,53537SEA920,5CB801134,881624K,CB72054,CB72054PR,CMS80181,CMS80182,ES3692,ES3712,EV800051,K750049,MES3712,MEV800051,MS101248,MS80181,MS80811,RK622030,RK622031
  • Quantity: 10 Piece

Last update on 2024-03-11 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

 


Leave a Comment

Share to...