| “This site contains affiliate links for which OEMDTC may be compensated” |
Accessory Installation Guide
| ENGINE BLOCK HEATER KIT 17MY Impreza
2020MY Impreza Engine Block Heater | A091SFL000  |
Loading...
Reload document 
Open in new tab
| “This site contains affiliate links for which OEMDTC may be compensated” |
Bestseller No. 2
Bestseller No. 3
Subaru 2020 2021 2022 2023 2024 2025 Outback & Legacy OEM Engine Block Heater A091SAN000 Genuine new Factory
- Genuine Engine Block Heater kit
- A091SAN000
- 2020 2025 OUTBACK & 2020-2025 LEGACY
- Warms engine coolant to promote easier starting in extreme cold conditions. Plugs into a a household electrical outlet.
- Genuine Subaru
Bestseller No. 4
Subaru 2014 to 2018 Subaru Forester 2014 to 2019 Outback Legacy OEM Engine Block Heater A091SSG000 Genuine new
- Genuine Subaru Engine Block Heater A091SSG000
- 2014-2018 Forester
- 2014-2016 Crosstrek Hybrid models
- 2015-2019 Outback 2.5 2015-2019 Legacy 2.5
- Warms engine coolant to promote easier starting in extreme cold. Plugs into household electrical outlet
Bestseller No. 5
Rsept Engine Heater,Car Engine Oil Heater Pad,5.6 Ft Silicone Heater Pad with Heat Protector 120W Cord Length,Engine Heater Oil Pan Heater Pad Replacement Magnetic Block Heater (1 Pack)
- [Package Included] The package contains 2 car heaters, each with 70 inch wires to meet your daily needs.
- [High Quality Material] It is made of high quality silica gel, which is waterproof and oil proof. The waterproof design of silica gel and power cord connection reduces the risk of short circuit. It has high thermal efficiency conversion and very fast heating speed, stable performance and even heat transfer.
- [Function] In winter, the lubrication and working efficiency of the fluid in the engine and gearbox are improved, the wear of the equipment is reduced, and the service life of the engine and gearbox is extended.
- [Easy to Install] The back of the heating pad is equipped with self-adhesive adhesive, which can be easily fixed on the surface of the item. Clean and dry the flat surface of the equipment before use, peel off the paper back and coat the oil pan heater, plug the 120V power cord into the socket, and heat for 10 to 15 minutes. You can also use magnets/adhesives to extend the bonding time (products do not include magnets and adhesives)
- [Widely Applicable] The light and flexible heater can quickly provide heat where it is needed. It is used to heat the fluid on any metal surface, such as engine oil sump, transmission, diesel tractor engine, snow blower, generator, etc.; Only for metal surfaces: Keep away from plastic; Note: The temperature is extremely high, please do not touch.
SaleBestseller No. 6
Magnetic Engine Block Heater 1155 1155X 1153, 200 Watt 120 Volt 60 HZ Replacement for Tractors, Trucks, Cars GELUOXI
- Engine Block Heater
- A frost plug heater is an electric heater that heats the engine of a vehicle to give quicker starts and protects your engine from damage that can occur during cold weather starts. Warmed engines also deliver better fuel economy, plus improves oil flow to provide better lubrication to the engine, which reduces wear and increases engine life.
- Part Numbers: 1153, 1155, 1155X (120 Volts; 60 HZ; 200 Watts)
- Uses include cars, trucks, tractors, snow blowers, chainsaws, snowmobiles, or other equipment. Applications can include heating engine block, oil pan, battery holder, in-take mani-fold, small engine equipment or hydraulic systems.
- Premium Quality & Easy installation: Made in quality materials, and we tested each one before shipping. If you are not sure our products are suitable for your model, please contact us.
Bestseller No. 8
Silicone Engine Block Heater Pad, 4" x 5" Self-Adhesive Oil Pan Heater Pad with 194°F Thermal Protector 120V 150W Car Warmer Pad with 68" Long Power Cord-2PCS
- Premium Material: Composed of hard-wearing silicone, these two engine block heater pads are absolutely waterproof, oil-proof, low-temperature resistant and durable enough to serve you for a long time.
- Warm Up Your Engine Quickly：In cold winter, use the engine heater pad before starting your car takes just 10-15 minutes to bring the oil up to the right temperature, which reduces oil consistency, better lubricates the engine, and reduces wear.
- Easy to Use: Clean application surface. Peel off the paper backing from the heater. Put flush against the bottom of your oil pan,engine block or other metal surface and have the pad completely secured against the metal surface. Finally, plug the power cord into the outlet.
- Thermal Protection: These 150W/120V oil pan heater pads have a built-in automatic thermal protector that keeps the heating temperature at a constant 194°F/90°C, effectively preventing safety hazards caused by high temperatures.
- Warm Tips: Safety is always our most important concern. Please do not put the car engine heater pad on any plastic surface on your engine to keep from burning up. And do not put it on the air box intake.
SaleBestseller No. 9
Zerostart 3100130 Engine Block Heater for Chevrolet and GMC 2001-2008 V8 -6.6L, Diesel (Duramax), 2007-2015 V8-6.6L Diesel (Duramax), 40mm Diameter | CSA Approved | 120 Volts | 1000 Watts
- Product Type :Auto Part
- Package Dimensions :7.91" L X4.38" W X1.93" H
- Country Of Origin: USA
- Package Weight :1.21Lbs
- Ensure Quick Winter Starts And Reduce Engine Wear
SaleBestseller No. 10
Bittwee Car Heater Plug Protector, 2PCS OEM#3600012 120V Vehicle Engine Block Heating Cord Plug Protective Cover, Engine Heater Extension Cord Plug Cap, Universal Automotive Accessories
- Stable Material: This automotive engine heating wire plug cover is made of PVC material. PVC material has excellent voltage resistance. This allows the PVC plug cover to effectively isolate the current, thus preventing short circuits and ensuring the safe operation of the engine heating cable system.The PVC material is low density and lightweight, which makes the PVC plug cover easier to install.
- Improves Electrical Safety: This car engine heater cord plug cover can provide good protection for your car engine heater plug, thus ensuring that your engine heater plug is safe and reliable. In addition, the anti-slip design of this car engine heater cord plug cover can increase the friction between the charging head of the extension cord and the plug cover to prevent the plug from falling off due to vehicle vibration.
- Universal Fit: This automotive engine heater cord plug cover offers compatibility and utility for a flexible protection solution. Its suitable for a wide range of 120V plug devices and can be used to protect heaters, trickle chargers, extension cords, power tools and more. Please note that the product specification matches your needs before purchasing.
- Easy to Install & Remove: This automotive engine heating wire plug cover is easy to install and remove. First, you should make sure that the engine is off to ensure safe operation. Next, you simply slip the plug protector over the engine block heater plug to complete the installation. Its comfortable fit and secure fastening holds the plug firmly in place so that your engine can run properly.
- Package Include: Our product package includes 2 automotive engine heating wire plug protectors, each plug protector measures 3.94 x 1.18 x 1.18 inches. With a replaceable part number of 3600012, the protectors fit snugly after installation to provide effective protection and support, thus ensuring an easy and efficient replacement process.
Last update on 2025-05-08 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
