Subaru Battery Tie Down

“This site contains affiliate links for which OEMDTC may be compensated”

Accessory Installation Guide

INSTALLATION INSTRUCTIONS

PART NUMBER: SOA3881300

1: REMOVE CABLE TIE CLIP

2: REMOVE NUTS

3: REMOVE BATTERY TIE DOWN

4: INSTALL SUBARU BATTERY TIE DOWN

5: REINSTALL NUTS REMOVED IN 2. TIGHTENING TORQUE: 3.5 NM (0.4 KGF-M, 2.6 FT-LB)

6: REINSTALL CABLE TIE CLIP REMOVED IN 1

SOA3881300

https://techinfo.subaru.com/stis/doc/accInstallGuide/SOA3881300%20-%20Subaru%20Battery%20Tie%20Down.pdf

https://static.oemdtc.com/AccessoryInstallationGuide/SOA3881300.pdf

Taking too long?

Reload document

Open in new tab

Download [532.87 KB]

“This site contains affiliate links for which OEMDTC may be compensated”

SaleBestseller No. 1

Subaru Battery Tie Down Holder Clamp Kit for STi Forester Impreza WRX Crosstrek - 82182AG001, 82161AG001, 82161AG012, 023806006 - Genuine OEM

Subaru Genuine Battery Hold Down Kit
Battery Holder 82182AG001 x1
J Hook 82161AG001 x1
J Hook 82161AG012 x1
Nut 902370049 x2

Bestseller No. 2

Battery Tie Down Holder Clamp Kit For Subaru Forester Impreza WRX XT 82182AG001 82161AG001 82161AG011 902370049

Part Type: Holder Clamp Kit
Manufacturer Part Number: 82182AG001 82161AG001 82161AG011 902370049
Placement on Vehicle: Left
For 2008-2019 Subaru
Package Included: Battery Holder 82182AG001, J Hook 82161AG001, J Hook 82161AG011, Nut 902370049

Bestseller No. 3

ARONOVA Heavy Duty Battery Hold Down Sets,With Billet Aluminum Battery Tie Down Bracket And 18-8(304) Stainless Steel J bolts(Red, 10 inch bolts)

【Material】Constructed with heavy duty 6061 aluminum & 18-8 stainless steel material, anti-rust, sturdy and available for long service life.
【Exclusive Finishment】Dual surface treatment, Eliminate the mill marks and burrs of CNC machining,and the bracket is sand-blasted and anodized for an elevated, frosted texture.
【Size】Overall length - 9.17" (233mm). Bolt hole center-to-center - 7.48" (190mm).Designed for batteries 6.81" (173mm) wide or slightly narrower.
【Application】Bracket Fits most group 21, 21R,22F,22HF,22R, 24, 24F, 24H, 24R, 24T, 25, 26, 26R, 26/70 27, 27F, 27H, 28, 29H, 30H, 31, 31A, 31T, 33, 34, 34R, 34/78, 35, 40R, 41, 42, 43, 46, 47, H6(48), H8(49), 85, 86, 90, 91, 92, 93, 94R,95R, 96R,97R, 98R, 99, 124, and 140R batteries.Please refer to BIC Battery Size Chart or measure the actual width and height of your battery before ordering.Tips:This tie down will NOT fit between raised vent caps on the surface of some batteries.
【Warning】For your safty,Please ensure that the battery is in good condition and there is no leakage of dilute sulfuric acid to avoid bracket from corrosion.

SaleBestseller No. 4

AICEL Battery Hold Down Sets, Billet Aluminum Alloy Car Battery Tie Down Bracket, Automotive Crossbar Holder Lock Mount with Galvanized Iron J Bolts, Car Accessories for Most Vehicles (Red)

【Material】: Made of aluminum alloy and galvanized iron, sturdy and not easy to deform or break. Rust and corrosion resistant, long service life. Smooth surface, eliminate abrasions and burrs. The bracket is sandblasted and anodized for a bright and textured finish.
【Size】: The size of the bracket is 9.2 x 1.7 x 0.7 inches. We suggest you refer to the BIC battery size chart or measure the actual width and height of the battery before ordering to make sure it fits your car battery.
【Applicability】: For most 21, 22F, 22HF, 22R, 24, 24F, 24H, 24R, 24T, 25, 26, 26R, 26/70, 27, 27F, 27H, 28, 29H, 30H, 31, 31A, 31T, 33, 34, 34R, 34/78, 35, 40R, 41, 42, 43, 46 , 47, 48, 49, 85, 86, 90, 91, 92, 93, 95R, 96R, 97R, 98R, 99, 124 and 140R batteries.
【Function】: When the original battery holder of the car is aging or unstable, the battery clamps can be a good replacement to keep the battery in its original position under any driving conditions.
【Package】: You will receive 1 x battery clip + 2 x j hooks + 2 x nuts + 4 x spacers, a full set of mounting accessories for your convenience. Note: This car battery hold down sets do not fit between some battery surface raised vent caps.

Bestseller No. 5

ARONOVA 304 Stainless Steel Battery Hold Down Compatible for Subaru IMPREZA AND WRX STI 2008-2013, Subaru Forester 2009-2013,Subaru Crosstrek 2013-2014

304 stainless steel J bolt and flange nut kits
Durable Construction:Thermoset baked-on Premium powder coat finish,heavy duty 16 Gauge steel Bracket
Fitment:Compatible for 2008-2013 IMPREZA AND WRX STI, 2009-2013 Forester, 2013-2014 Crosstrek
Cost-Effective Solution:A good replacement for the old or broken one
NOTE: Please carefully check your vehicle type with our fitment, and please compare our part pictures with your old part to avoid the wrong purchase.

Bestseller No. 6

Battery Tie Down Holder Clamp Kit For Subaru Impreza Forester Legacy Outback WRX 82182AA040 8161AA041 902370049

Part Type: Holder Clamp Kit
Manufacturer Part Number: 82182AA040
Other Part Number: 82161AA041, 902370049
For 1993-2008 Subaru
Package Included: Battery Hold Down, Battery Hold Down Rods, Flange Nuts

Bestseller No. 7

ARONOVA Battery Hold Down Compatible for 2013-2019 Subaru BRZ,2013-2019 Scion fr-s,with 304 Stainless Steel J Bolt Kit

Fitment:Compatible for 2013-2019 Subaru BRZ,2013-2019 Scion fr-s
Durable Construction:Thermoset baked-on Premium powder coat finish,heavy duty 16 Gauge steelDurable Construction:Thermoset baked-on Premium powder coat finish,heavy duty 16 Gauge steel
Cost-Effective Solution:A good replacement for the old or broken oneCost-Effective Solution:A good replacement for the old or broken one
304 stainless steel J bolt and flange nut kits304 stainless steel J bolt and flange nut kits
NOTE: Please carefully check your vehicle type with our fitment, and please compare our part pictures with your old part to avoid the wrong purchase.

SaleBestseller No. 8

Subaru Genuine Subaru Aluminum Battery Tie Down Crosstrek Forester Ascent WRX STI BRZ SOA3881300 SOA3881270

Subaru Aluminum battery hold down
SOA3881300
Replacement battery hold down is machined from billet aluminum , anodized in blue laser etched with Subaru Logo (also have blue aluminum oil cap in our store)
2009-2019 Forester 2019-2024 Ascent 2013-2020 BRZ 2008-2024 Impreza
2008-2024 Wrx 2008-2023 Sti 2013-2023 Crosstrek

Bestseller No. 9

ARONOVA Battery Hold Down Sets,With Billet Aluminum Battery Tie Down Bracket and 18-8(304) Stainless Steel J bolts (Red, 10 inch bolts)

Premium 6061 aluminum crossbar & 18-8 Stainless steel j bolt sets.
Designed for batteries 6.89" (175mm) wide or slightly narrower.
Tie down bracket overall length - 8.58" (218mm),bolt center to bolt center length - 7.48" (190mm).Available in 8/10 inch j hooks
Exclusive Finishment: Dual surface treatment, Eliminate the mill marks and burrs of CNC machining,and the bracket is sand-blasted and anodized for an elevated, frosted texture.
Usually fits most group 21, 21R,22F,22HF,22R, 24, 24F, 24H, 24R, 24T, 25, 26, 26R, 26/70 27, 27F, 27H, 28, 29H, 30H, 31, 31A, 31T, 33, 34, 34R, 34/78, 35, 40R, 41, 42, 43, 46, 47, H6(48), H8(49), 85, 86, 90, 91, 92, 93, 94R,95R, 96R,97R, 98R, 99, 124, and 140R batteries.(Tips: this tie down will NOT fit between raised vent caps on the surface of some batteries)

Bestseller No. 10

Battery Hold Down Bracket Holder, Car Battery Holder Kit with 10in J bolts,Aluminum Alloy Battery Tie Down Mount Bracket, Battery Tray for Car Battery Mount Bracket Hold Lock Accessories (Black)

[Package Includes] The package includes 1 battery hold-down bracket, 2 10-inch J-shaped hooks, 2 sets of accessories (applicable to different installation types) - 2 hexagon nuts and wing nuts, 2 rubber protective sleeves, 2 protective rubber washers, 2 spring lock washers and 2 flat washers.
[Size] The total length of the battery fastening bracket is 218 mm (8.58 "), the distance between the bolt centers is 190 mm (7.48"), and the bolt length is 250 mm (10 "). Please measure the diameter of the primary battery before purchasing to avoid purchasing products with incorrect size.
[High Quality] The car battery holder is made of high-quality aluminum alloy, which is firm, rust-free and non-oxidizing. The thickened aluminum design on the side enhances the corrosion resistance and durability of the product. The surface of the bracket is anodized to obtain a lasting finish.
[Function] Replace the old battery kit to provide stable support for the battery and more effectively protect the battery.
[Applicable] This battery tie down applicable to most groups 21, 21R, 22F, 22HF, 22R, 24, 24F, 24H, 24R, 24T, 25, 26, 26R, 26/70 27, 27F, 27H, 28, 29H, 13A, 30, 33, 34, 34R, 34/78, 35, 40R, 41, 42, 43, 46, 47, H6 (48), H8 (49), 85, 86, 90, 91, 92, 93, 94R, 95R, 96R, 97R, 98R, 99, 124 and 140R batteries.

Last update on 2025-04-18 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

SEOCONTENT-START

A BATTERY TIE DOWN X 1 B TOOLS REQUIRED INSTRUCTIONS LABELS X1 10mm DEEP SOCKET PART NUMBER: SOA3881300 DESCRIPTION: SUBARU BATTERY TIE DOWN SUBARU OF AMERICA ISSUE 01 DATE 02/19/20 PAGE 1/2 MEANING OF CHARACTERS INSTALLATION INSTRUCTIONS PART NUMBER SOA3881300 RE-USE 10mm RE-USE 10mm RE-USE RE-USE INSTALLATION INSTRUCTIONS ALL MODELS ALL MODELS 3: REMOVE BATTERY TIE DOWN 6: REINSTALL CABLE TIE CLIP REMOVED IN 1 5: REINSTALL NUTS REMOVED IN 2. TIGHTENING TORQUE: 3.5 NM (0.4 KGF-M, 2.6 FT-LB) ALL MODELS 1: REMOVE CABLE TIE CLIP ALL MODELS SUBARU OF AMERICA 2: REMOVE NUTS PAGE 2/2 PART NUMBER SOA3881300 ISSUE 01 DATE 02/19/20 ALL MODELS 4: INSTALL SUBARU BATTERY TIE DOWN ALL MODELS A ATTACHE DE BATTERIE X 1 B OUTILS REQUIS ÉTIQUETTES D’INSTRUCTIONS X1 DOUILLE LONGUE DE 10 MM NUMÉRO DE PIÈCE : SOA3881300 INSTRUCTIONS D’INSTALLATION DESCRIPTION : ATTACHE DE BATTERIE SUBARU SIGNIFICATION DES SYMBOLES NUMÉRO DE PIÈCE SOA3881300 VERSION 01 DATE : 19 février 2020 SUBARU OF AMERICA PAGE 1 de 2 Retirer Retirer Installer Installer Déconnecter Déconnecter Connecter Connecter Emplacement de l’attache Emplacement de l’attache ou de la visou de la vis Couple de Couple de serrageserrage Desserrer Desserrer Jeter Jeter Réutiliser Réutiliser RÉUTILISER 10 mm RÉUTILISER 10 mm RÉUTILISER RÉUTILISER NUMÉRO DE PIÈCE SOA3881300 VERSION 01 DATE : 19 février 2020 SUBARU OF AMERICA PAGE 2 de 2 TOUS LES MODÈLES TOUS LES MODÈLES 5. REMETTRE EN PLACE LES ÉCROUS RETIRÉS À L’ÉTAPE 2. COUPLE DE SERRAGE : 3,5 N.M (0,4 KGF-M, 2,6 LB-PI) 6. REMETTRE EN PLACE L’ATTACHE-CÂBLE RETIRÉ À L’ÉTAPE 1 TOUS LES MODÈLES TOUS LES MODÈLES 3. RETIRER L’ATTACHE DE BATTERIE 4. INSTALLER L’ATTACHE DE BATTERIE SUBARU INSTRUCTIONS D’INSTALLATION TOUS LES MODÈLES TOUS LES MODÈLES 1. RETIRER L’ATTACHE-CÂBLE 2. RETIRER LES ÉCROUS

**************************************************************************************************************

SEOCONTENT-END