“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10233083
Manufacturer Communication Number: 168913
Summary
CVT Component Design Changes
NUMBER: 16-89-13
DATE: 12/18/13
APPLICABILITY: | 2014 Forester Turbo Models |
---|---|
SUBJECT: | CVT Component Design Changes and Addition of CVT Fluid Filter |
INTRODUCTION
This Service Information announcement provides information regarding three new production enhancements to the CVT transmission (model TR690) used in the Forester model with 2.0L DIT (Direct Injection Turbo) engine:
- An in-line CVT fluid filter has been added to reduce the possibility of contamination entering the lock-up circuit of the valve body
- Machining of an existing fluid passage in the transmission case to accept the new filter
- A smaller corresponding port on the mating surface of the valve body along with a sealing o-ring was added to retain the filter in the transmission case.
COUNTERMEASURE IN PRODUCTION
The revised valve body was incorporated into production 9/17/2013 with transmission #631685.
All three of the changes listed above were incorporated into production 9/21/2013 starting with VIN E*503139 and transmission #632523.
PART INFORMATION
PART NAME | PART NUMBER |
---|---|
Filter Assy- ATF | 31835AA040 |
Case CP- Trans, AT | 31311AA840 |
Body AY-Cont Vlv | 31706AA033 |
The illustration below provides additional detail on the transmission case enhancement along with the location and installation of the new filter.
IMPORTANT NOTES:
- The new filter cannot be retro-fitted to CVT transmissions prior to #632523 as there is no provision made into the earlier version main case to accept it.
- There is no scheduled maintenance interval for this new filter.
- The new filter is a one-time use item, if removed for any reason, it must be replaced.
- The transmissions utilizing this new filter are for high-torque output models (e.g. 2014 Forester Turbo) and cannot be retro-fitted.
- The new valve body has applicability to earlier models. Consult the applicable parts catalog for specific applications.
1 Affected Product
Vehicle
MAKE | MODEL | YEAR |
SUBARU | FORESTER | 2014 |
1 Associated Document
Manufacturer Communications
NUMBER: 16-89-13
DATE: 12/18/13
https://www.nhtsa.gov/recalls?nhtsaId=10233083
MC-10233083-9999.pdf 510.408KB
NHTSA ID Number: 10067064
Manufacturer Communication Number: 16-89-13
Summary
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
1 Associated Document
Service Bulletin Document
NUMBER: 16-89-13
DATE: 12/18/13
https://www.nhtsa.gov/recalls?nhtsaId=10067064
SB-10067064-3639.pdf 510.408KB
- 6 QUARTS OF GENUINE Subaru CVTF-II FLUID
- SOA427V1660 X6 This is green fluid
- 2013-2019 Crosstrek with CVT NON HYBRID 2014-2016 Crosstrek CVT HYBRID
- 2014-2022 Forester 2.5 Naturally Aspirated with CVT NON TURBO
- 2010-2019 Legacy 2.5 FB25 with CVT 2010-2014 Legacy 3.6 with CVT 2010-2019 Outback 2.5 FB25 with CVT 2010-2014 Outback 3.6 with CVT 2012-2022 Impreza 2.0 non turbo with CVT
- 8 QUARTS OF GENUINE Subaru CVTF-II FLUID
- SOA427V1660 X 8 This is green fluid
- 2013-2019 Crosstrek with CVT NON HYBRID 2014-2016 Crosstrek CVT HYBRID
- 2014-2022 Forester 2.5 Naturally Aspirated with CVT NON TURBO
- 2010-2019 Legacy 2.5 FB25 with CVT 2010-2014 Legacy 3.6 with CVT 2010-2019 Outback 2.5 FB25 with CVT 2010-2014 Outback 3.6 with CVT 2012-2022 Impreza 2.0 non turbo with CVT
- [Fine Tune Your Vehicle]: Automatic and manual transmission fluid provides hydraulic pressure, lubrication, and friction to your vehicle’s engine; Use the Idemitsu CVT Type SB2 CVT Transmission Fluids 5 Quart Bottle to top off your vehicle and keep you on the road longer
- [Smoother Shifting]: Continuously variable transmission oil will help your gears shift properly to prevent hard or jerky shifting; Designed with frictional properties for superior performance and high torque
- [Extend Engine Life]: Precisely engineered transmission CVT fluid resists buildup; Anti-wear technology protects your belts, gears, and pullies, while high viscosity properties withstand intense temperatures
- [For Your Vehicle]: SB2 CVT fluid is compatible with Subaru TR580 transmissions; Refer to owner manual specifics to ensure compatibility; CVT transmission oil is crafted to meet Type CVTF-II specifications
- [Contents]: Vehicle lubricant package includes 1 bottle of Idemitsu SB2 CVT oil transmission fluid; 1 bottle of 5 quart (4.7L) CVT trans fluid makes refilling your vehicle more convenient
- Surpasses OEM Fluid Performance: Meets all functionality requirements for CVT manufacturers; Better, more reliable, longer lasting performance than OEM and factory fluids for both chain & belt CV transmissions in European, Asian, and US vehicles
- Universal Spec Compliance: Fully compatible with all CVT Transmissions from most OEMs, including Mercedes, Suzuki, Hyundai, Kia, Nissan, Honda, Ferrari, BMW, Mini, Idemitsu, and many others
- Excellent Shift Quality: Reduces or eliminates transmission noise and shudder; Eliminates slipping, and offers consistent oil film for quiet, flawless high speed shifting
- Total Compatibility: With Subaru, Nissan NS-2 & NS-3, Kia, BMW, Mercedes, Honda, Acura, Mitsubishi, VW, Audi, Mazda, Ford, and many other CVT fit vehicles
- Excellent Temperature Performance: Ideal for all season applications from 130 F to -40 F, without any performance issues
- Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
- Enhanced anti-shudder protection for maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
- 【Replace Part Number】: 31825AA050, 31825AA051, 31825AA052, 31706AA030, 31706AA031, 31706AA032, 31706AA033.
- 【Compatible with】: Subaru Legacy 2010 -2017/ Outback 2010-2017/ Impreza 2012-2016/ Subaru Forester 2014- 2017/ Subaru Crosstrek 2013-2014 with TR580 TR690 Transmission.
- 【Installation】: The installation of the torque converter lock-up solenoid is simple. Install based on the required ohms and not solely by color. Please confirm the Resistance you need is 12-13Ω. If the following code appears, you may need to replace the Lock-Up Solenoid:P2764, P2763, P2762.
- 【Package included】: 1X torque converter lock-up solenoid
- 【Resistance】:12-13Ω.
- Replacement for Subaru Legacy Outback 2.5L 2010-2017
- Replacement for Subaru Impreza 2.0L 2012-2016
- Replace Part Number: 31825AA050,31825AA051,31825AA052,31706AA030, 31706-AA030,31706-AA031,31706-AA032,31706-AA033
- All items tested for reliability, durability and performance
- Please confirm the product part number and pictures before purchase
- !!!--Please Note--!!!: Only Fit for Brwon Torque Converter Solenoid 12.2-13.2Ω (Brwon 12.2-13.2Ω)!!!
- Torque Converter Clutch Solenoid Replacement Number: TR580 TR690 31825AA050 31825AA051 31825AA052 31706AA030, 31706AA030, 31706AA031, 31706AA032, 31706AA033.
- Fit Car Model: For Subaru Crosstrek Forester Legacy Outback Impreza with CVT TR580 TR690 Transmission.
- Package Included: 1 x AWD Solenoid as pictures Brown 12.2-13.2Ω
- Notice: Please check the part number before purchasing to ensure fitment. Any question, please feel free to cantact us at any time.
- OEM:TR580 TR690 31825AA050 31825AA051 31825AA052 31706AA030
- Compatible with Subaru Crosstrek Forester Legacy Outback Impreza with CVT TR580 / TR690 Transmission
- Easy to install with related installation video, durable, engineered from high-quality materials to improve reliability and durability
- Searching related installation video on the internet will be recommended and always wear eye protection and start with installation tools
- Our products are stored in warehouses, and there will be collisions during handling or transportation (most products need to be kept lubricated, it is normal to have lubricants, they are not second-hand products). But please rest assured that it will not affect the use. If you have certain requirements for appearance, please contact us and we can exchange your goods. Thank you for your understanding!
Last update on 2024-04-08 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
Bulletin Number: 16-89-13; Date: 12/18/13 Page 1 INTRODUCTION This Service Information announcement provides information regarding three new production enhancements to the CVT transmission (model TR690) used in the Forester model with 2.0L DIT (Direct Injection Turbo) engine: • An in-line CVT fluid filter has been added to reduce the possibility of contamination entering the lock-up circuit of the valve body • Machining of an existing fluid passage in the transmission case to accept the new filter • A smaller corresponding port on the mating surface of the valve body along with a sealing o-ring was added to retain the filter in the transmission case. COUNTERMEASURE IN PRODUCTION The revised valve body was incorporated into production 9/17/2013 with transmission #631685. All three of the changes listed above were incorporated into production 9/21/2013 starting with VIN E*503139 and transmission #632523. PART INFORMATION PART NAME PART NUMBER Filter Assy- ATF 31835AA040 Case CP- Trans, AT 31311AA840 Body AY-Cont Vlv 31706AA033 NUMBER: 16-89-13 DATE: 12/18/13 APPLICABILITY: 2014 Forester Turbo Models SUBJECT: CVT Component Design Changes and Addition of CVT Fluid Filter SERVICE INFORMATION ATTENTION: GENERAL MANAGER q PARTS MANAGER q CLAIMS PERSONNEL q SERVICE MANAGER q IMPORTANT – All Service Personnel Should Read and Initial in the boxes provided, right. Continued… CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS. Subaru Service Bulletins are intended for use by professional technicians ONLY. They are written to inform those technicians of conditions that may occur in some vehicles, or to provide information that could assist in the proper servicing of the vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do the job correctly and safely. If a condition is described, DO NOT assume that this Service Bulletin applies to your vehicle, or that your vehicle will have that condition. SUBARU OF AMERICA, INC. IS “ISO 14001 COMPLIANT” The international standard for excellence in Environmental Management Systems. Please recycle or dispose of automotive products in a manner that is friendly to our environment and in accordance with all local, state and federal laws and regulations. Bulletin Number: 16-89-13; Date: 12/18/13 Page 2 The illustration below provides additional detail on the transmission case enhancement along with the location and installation of the new filter. IMPORTANT NOTES: • The new filter cannot be retro-fitted to CVT transmissions prior to #632523 as there is no provision made into the earlier version main case to accept it. • There is no scheduled maintenance interval for this new filter. • The new filter is a one-time use item, if removed for any reason, it must be replaced. • The transmissions utilizing this new filter are for high-torque output models (e.g. 2014 Forester Turbo) and cannot be retro-fitted. • The new valve body has applicability to earlier models. Consult the applicable parts catalog for specific applications.
SEOCONTENT-END