NHTSA ID Number: 10173117
Manufacturer Communication Number: 07-75-13R
Summary
This Bulletin provides information regarding DTC P0606 related specifically to the determination of this code on Forester Turbo and applicable WRX models.
39 Affected Products
Vehicles
MAKE | MODEL | YEAR |
---|---|---|
SUBARU | FORESTER | 2002-2020 |
SUBARU | WRX | 2002-2021 |
NUMBER: 07-75-13R
DATE: 06/06/13
REVISED: 03/10/20
APPLICABILITY: | All Models with DIT (Turbo) Engines |
---|---|
SUBJECT: | DTC P0606 after Vehicle Battery Is Reconnected |
INTRODUCTION
This Bulletin provides information regarding DTC P0606 related specifically to the determination of this code on Forester Turbo and applicable WRX models.
The engine management system is equipped with a back-up memory. When disconnecting the battery cables, this back-up memory is cleared.
On Forester Turbo and applicable WRX models, after re-connecting the battery, if the ignition switch is turned back “ON” within one minute after the first time the ignition is turned “OFF”, it becomes possible for the CEL to illuminate storing DTC P0606 in memory. The code will not occur immediately, but may occur after a period of time depending upon how the vehicle is operated.
Examples of scenarios which can “start the groundwork” for DTC P0606:
- Disconnecting the battery
- OBD Memory Clear
- A dead or deeply discharged battery
- ECM Replacement (requires battery disconnect)
- Accessory installation or other service procedures which require disconnecting the battery
SERVICE PROCEDURE / INFORMATION
To minimize the chances of DTC P0606 setting, if you know (or suspect) any of the above or a similar scenario has occurred, (or if you already have a DTC P0606 stored), follow the procedure below:
- Using the SSMIII, clear the ECM memory in OBD. (Main Menu > Each System Check > Engine Control System > OBD System > Clear Memory)
- Turn the ignition “ON” then “OFF” normally one time. Wait for more than one minute before turning the ignition back “ON” again.
This procedure allows the self-shutoff relay to power down, completing the self-shutoff procedure.
Always attach testing results to the repair order for future reference.
WARRANTY / CLAIM INFORMATION:
For vehicles within the Basic New Car Limited Warranty period or covered by an active Subaru Added Security Gold plan, this repair may be submitted using the following claim information:
Labor Description | Labor Operation # | Labor Time | Fail Codes |
P0606, ECM MEMORY CLEAR ONLY | A031-142 | 0.2 | UEC-43 |
IMPORTANT REMINDERS:
- SOA strongly discourages the printing and/or local storage of service information as previously released information and electronic publications may be updated at any time.
- Always check for any open recalls or campaigns anytime a vehicle is in for servicing.
- Always refer to STIS for the latest service information before performing any repairs.
NUMBER: 07-75-13R
DATE: 06/06/13
REVISED: 03/10/20
https://www.nhtsa.gov/recalls?nhtsaId=10173117
https://static.nhtsa.gov/odi/tsbs/2020/MC-10173117-0001.pdf
NUMBER: 07-75-13
DATE: 06/06/13
https://www.nhtsa.gov/recalls?nhtsaId=10065779
https://static.nhtsa.gov/odi/tsbs/2013/SB-10065779-3639.pdf
- Classic design, fast scan and clear trouble codes, even a beginner can use this unit to read the error code, find out what the problem is and perhaps fix it. Save money and time.
- Works on MOST 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports English, German, French, Spanish, Finnish, Dutch, Russian and Portuguese.
- Easily determines the cause of the check engine light. I/M monitor readiness test, turn off the MIL (check engine light) as well as view freeze frame data. Read hard (memory) / pending (intermittent) and historic codes and show definitions.
- The AD310 scanner is well built with a large LCD display (128 x 64 pixel) that has white backlight and contrast adjustment, indicates test results directly. No need any Batteries or Charger, gets the power directly from the OBDII Data Link Connector in your vehicle.
- It's equipped with a 2. 5 feet long cable and made of a very thick flexible insulator. There are 4 buttons on AD310. The Up and Down button for scrolling the menu, the Enter and Exit button allow for navigation back and entering menu.
- 😀【Vehicle CEL Doctor】The obd2 scanner can quickly help you read DTCs (engine fault codes), locate bad O2 sensor, access to emissions readiness status, turn off check engine light(CEL) or MIL(Malfunction Indicator Lamp) , reset monitor, read enhanced data and retrieve VIN of your vehicle.
- 😀【Accuracy & Streams】Live data in both graph and text forms. Accurately read vehicle error codes for most Worldwide cars, SUVs, light truck and 12V diesels equipped with Obd2. Besides, the car scanner also shows live vehicle sensors data in text and graph format and allows you to focus on any suspicious or symptom-specific data parameters.
- 😀【Worthy to Own】Recommended by Mechanic Scotty Kilmer on Youtube. Supports data logging and Printer compatible. Unique PATENTED design, clearly arranged keypad, 2.8" wide color screen with Life-Time Free software update and 1 year quality assurance, it deserves to own. Supported by EXCLUSIVE engineer and service team for product and service quality. (Please note currently the package does not include a CD. )
- 😀【Smog Check Helper】Read/Erase and I/M readiness hot keys make it easy to use this car computer reader right out of the package. Red-Yellow-Green Leds and build-in speaker indicate the readiness status for smog test. The obdii scan tool also help catch intermittent problems and confirm repairs during a drive cycle, so that help you quickly determine the health of the car.
- 😀【Home Necessity】NT301 car scanner is open to global customers. No battery required, it is charged directly from the OBDII interface in your vehicle (please turn your vehicle ignition on), making it convenient for Home and Autoshop Mechanics. It is recommended as a necessity in your toolbox and one of the best gifts for father. (Quick Start Guide is included in the package.)
- Read and clear your Check Engine Light and all other vehicle systems. Get your unlimited free vehicle specific Repair Reports, generated from our database of millions of fixes verified by Professional Automotive Technicians
- As easy to use as a code reader with all the capabilities of an expensive handheld scan tool, plus the benefits of your smartphone or tablet (free app updates, portability, saving data, interactive graphing of live data)
- Officially licensed and certified for Apple and Android devices
- The BlueDriver App and BlueDriver Sensor work exclusively with each other to ensure quality
- BlueDriver is the Professional OBD2 Diagnostic Scan Tool trusted by mechanics and developed by Professional Engineers in North America
- TURN OFF CHECK ENGINE LIGHT: MS300 check engine code reader can read, clear generic, manufacturer-specific and pending codes. It enables you to figure out why CEL is on like a pro and turn off check engine light instantly after proper repair.
- MECHANIC APPROVED: MS300 OBD2 scanner works with most OBDII compliant(OBD2 protocols: KWP2000, ISO2000, ISO9141, J1850 VPW, J1850 PWM, and CAN) sedans, SUVs and light trucks post-1996 for US cars, post-2000 for EU-based and Asian cars.
- DIAGNOSE IN SECONDS: MS300 auto code reader features easy to use 2 button design to read, clear DTCs to help home mechanics locate car problems fast. With an intuitive interface and easy-to-read backlit screen, this diagnostic code reader is easy to use.
- SMOG CHECK: MS300 car code reader retrieves I/M Readiness status to check emission-related systems like misfire monitor, fuel system monitor, comprehensive components monitor, O2 sensors, EVAP to help your vehicle ready pass the annual smog check.
- NO BATTERY NEEDED: MS300 OBDII scan tool communicates with vehicles through standard 16-PIN OBD2 cable and it’s powered by vehicle directly- no battery needed. Please follow the correct usage order: Engine off- Plug MS300 in- Turn Ignition On.
- For End User & DIYERS: This error code reader is ‘plug and play’ and comes with an easy interface. Even if you’re not familiar with vehicle repair, you can quickly take control of this code reader, and get the information you want
- Turn Off CEL: This car diagnostic tool supports reading DTCs, displaying Live Data, Freeze Frame & I/M Readiness etc to figure out the root cause of the Check Engine Light (CEL) and turning it off to help you detect any potential problems
- Patent Guarantee: AL319 Code Reader features a patented One-Click I/M Readiness Key for quick State Emissions readiness check and drive cycle verification. No batteries are needed as it will get the power directly from the OBDII Data Link Connector in your vehicle
- User-Friendly Design: This check engine code reader equipped with TFT color display which shows DTC definitions more clearly, built-in speaker provide audible indication, LED Indicator etc. 2. 5 feet long cable is long enough without getting in the way
- Extensive Application: Compatible with 7 languages and various post-1996 OBD II protocol vehicles, this OBD2 scanner provides accurate and fast diagnosis for worldwide car owners. 12 months warranty from the date of purchase and lifetime free update are offered by this Automobile OBDII scan tool
- WIDE COMPATIBILITY - Recommended by YouTube Star Scotty Kilmer on his channel. Works on most vehicles sold in the USA with model year of 1996 or newer; Supports all OBDII protocols: KWP2000, ISO9141, J1850 VPW, J1850 PWM, and CAN (Controller Area Network); Displays in English, German, French, Spanish, Finnish, Dutch, Russian, and Portuguese; Requires no battery or charger as the unit gets power directly from the OBDII Data Link Connector in the vehicle.
- CRITICAL FUNCTIONALITY - Reads quickly and erases stored emission-related codes, pending codes, and shows code definitions. Turns off the MIL (check engine light), helps in resetting the monitor before taking it to Smog, and tells you what is going on before bringing the car in for repair.
- ENHANCED OBDII DIAGNOSTICS - Supports O2 Sensor and EVAP (Evaporative Control) System Test. AD410 code scanner can be used to initiate a leak test on a vehicle's EVAP system by monitoring the integrity of the fuel tank system. The O2 Sensor Test is designed to monitor and adjust air/fuel mixture, which will help identify and troubleshoot issues related to fuel efficiency and vehicle emission.
- QVGA DISPLAY & NEW UI - AD410 code reader is a greatly enhanced upgrade from more basic diagnostic scan tools. It has a 2. 4" TFT true color (262K) LCD display for clear test results showing. With an easy-to-read UI design, the user can easily access Setup, OBDII Diagnostics, I/M readiness, and DTC Look-up and Review. You don't need to read the manual to know what to do, even for a beginner.
- DIAGNOSTIC REPORTS & UPDATE - The "Review & Print" option can be used to save or print diagnostic reports as needed. ANCEL brand provides life-time free software updates for this unit to fix the latest bugs or add new parameters. Just download the software from the ANCEL website and then follow on-screen instructions to install.
- Universal Compatibility: Applicable to MOST US-based cars (made in 1996 or later), EU-based cars (made in 2001 or later), Asian cars (made in 2008 or later), and all OBD II/EOBD/CAN-compliant vehicles.
- Smog Check: Clearly shows whether the emission-related systems are operating properly or ready for inspection and maintenance testing; turns off check engine light and resets monitors; views freeze frame data, read live PCM data stream, EVAP system test data, On-Board Monitor test data and display live O2 sensor test data.
- Shows the code and what the code means directly. Able to retrieve generic (PO P2 P3 and UO) manufacturer specific (P1, P3, and U1) codes and pending codes, and vehicle information (VIN, CID and CVN). And can store the data you have viewed (DTCs, freeze Frame, live data, etc).
- Supports all OBDII protocols, including ISO9141, KWP2000, J1850 PWM, J1850 VPW and CAN (Controller Area Network).
- No battery needed, just plug it into the OBDII port and start diagnosis. Features a 2.5-foot flexible plug and a 7-button panel. Supports DTC look-up, and software upgrade. Supports multi-language display (English, German, Spanish, Dutch, Russian).
- 🌲【ABS&SAS&SRS SCANNER】FOXWELL NT630 Plus ABS & Airbag OBD2 scanner does not only provides accurate and professional diagnosis of ABS/SRS/SAS faults , but also removes air from the internal brake fluid chambers after servicing the brakes. 👉TIPS: It can not remove airbag crash data or collision data.
- 🌲【ABS BLEEDING SCAN TOOL】Anytime the brake system is opened to replace components such as calipers, wheel cylinders, the master cylinder, or brake lines or hoses, air gets inside. The air has to be removed by bleeding the brakes if you want a firm brake pedal. You can use this diagnostic scanner to help bleed the brake, cycling the pump and valves during the bleeding process.
- 🌲【ACTIVE TEST】The OBD scan tool temporarily allow you to active or control ABS/Airbag system and component, including switches, sensors, relays& actuators. It saving your time and labor costs.
- 🌲【PERFECT COMPATIBILITY】The diagnostic scanner for automobiles is compatible with almost all OBDII cars, SUVs, minivans, light-duty trucks sold worldwide, Which makes it suitable for both mechanic and DIYers. ABS and SRS Coverage for 60+ Vehicle Makes. SAS calibration is on 30+ selected make.
- 🌲【UPGRADE AND NO WORRIES】The update tool FoxAssist allows you update& uninstall software, save & print data, gaining more available vehicle models and language on the original basis free lifetime. And there is a technical assistance for timely and effectively solving the quality problem within 24 Hours.
- NOT COMPATIBLE WITH iOS DEVICES - (iPhones, iPads etc); OUR BLUETOOTH OBD2 scanner IS ONLY COMPATIBLE WITH ANDROID OR WINDOWS DEVICES; For iOS devices, see our WiFi OBD Reader
- READ & RESET - Our OBD2 diagnostic scanner tool will work on all cars purchased in the USA model year 1996 or newer; Unlike other OBD2 scanners, ours works on ALL OBD2 protocols including J1850 and CAN; With our scan tool you can read & reset the check engine light on your car with ease
- REAL TIME - Monitor the diagnostic sensors in your vehicle in real time for things like O2 data, fuel pressure, EVAP system & more; Car reporting an EVAP code? Check your O2 readings to see which sensor is faulty and get it fixed; React quickly to problems like a professional mechanic
- HUGE APP SELECTION - 3rd party app must be downloaded to use; Choose from many OBDII apps such as Torque Pro, Piston, Dash Command, OBD Fusion & more; Some OBDII readers limit you in which apps you can use, not BAFX Products; Choose an app at a price that meets your needs
- This OBD2 scanner does not read ABS, SRS, TPMS or Oil Change lights; WARRANTY - 2 Year manufacturer warranty with USA based friendly support staff; Don't be left stranded by support
- Classic Handhold Design OBD2 Code Reader, plug and play, fast scan and clear trouble codes, very easy to use, even a beginner can use this unit to read the error code.
- Check engine light. Run I/M monitor readiness test, Turn off check engine light, View freeze frame data and codes and show definitions, Monitor engine coolant temperature, etc.
- Working on most 1996 US-Based cars SUVs,Light Trucks, 2000 EU-Based and Asian cars, vehicles with all OBD2 protocols CAN, ISO9141, J1850 VPW, J1850 PWM, KWP2000.
- Built-in a large LCD display (128 x 64 pixel) with white backlight and contrast adjustment, from which you can read test results directly.
- Package includes a Foseal handhold OBD Scanner with a 2.5 feet long cable and a friendly user manual; 18 months quality insurance; Any problem, welcome to contact us!
Last update on 2021-02-27 / Affiliate links / Images from Amazon Product Advertising API
Last update on 2021-02-27 / Affiliate links / Images from Amazon Product Advertising API