“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10219467
Manufacturer Communication Number: 15-299-22
Summary
This bulletin announces an application change to the Remote Engine Starter (RES) control unit on 2019 Outback & Legacy models.
NUMBER: 15-299-22
DATE: 08/02/22
APPLICABILITY: | 2019 MY Outback & Legacy / Key Start Ignition |
SUBJECT: | Remote Engine Starter (RES) / Intermittent Horn Beeping Discontinued Part Number H001SAL003 |
INTRODUCTION:
This bulletin announces an application change to the Remote Engine Starter (RES) control unit on 2019 Outback & Legacy models. The change was incorporated to address a small number of incidents concerning unintentional horn beeping on vehicles fitted with an RES system. A customer may experience 1-4 horn beeps while the vehicle is being driven or at vehicle start-up with the ignition key. This concern may repeat at random times with varied gaps between occurrences. If this issue is duplicated, replacement of the RES control module and installation of the hood switch/ bracket will be required. Please review the parts application information outlined within this bulletin.
PRODUCTION CHANGE INFORMATION:
The RES installation kit applicability for MY19 has been changed from H001SAL003 to H001SAL002 (also applicable to MY18).
Part Description | Part Number |
MY18 & MY19 Remote Engine Starter | H001SAL002 |
DISCONTINUED MY19 Remote Engine Starter ECU | H001SAL022 |
DISCONTINUED MY19 Remote Engine Starter Kit | H001SAL003 |
PART INFORMATION:
REMINDER: Always order the most up-to-date replacement parts based on the specific VIN being repaired.
Part Description | Part Number |
REMOTE ENGINE START ECU | H001SAL021 |
HOOD SWITCH / BRACKET | H001SAL040 |
BOTH part numbers H001SAL021 (RES Control Module) and H001SAL040 (Hood Switch & Bracket) are required. The components included are shown below.
IMPORTANT: Always confirm that the subject vehicle does not already contain the applicable part numbers and does contain the non-applicable part numbers prior to proceeding with any repairs. See below for details.
Applicable Legacy/Outback Key Start RES Kit
- Subaru
RES Installation Kit Part #H001SAL002
- Voxx RES Control Module Part #4360616 (shown on the upper label)
- SPN0001851 (shown on the lower label)
Non-Applicable Legacy/Outback Key Start RES Kit
- Subaru
RES Installation Kit Part #H001SAL003
- Voxx RES Control Module Part #4360783 (Shown on the upper label)
- SPN0003361 (Shown on the lower label)
SERVICE PROCEDURE INFORMATION:
REMINDER: Customer satisfaction and retention starts with performing quality repairs.
Service procedures for the RES Control Module and the Hood Switch replacement remain unchanged. Always refer to the Accessory Installation Guide and review the full requirements of the repair being performed. The Guide procedures contain information critical to performing an effective repair the first time, every time.
See installation STIS instruction link for Part Number SPN0004850 referencing the two part numbers noted above.
2 Affected Products
Vehicles
1 Associated Document
Manufacturer Communications
NUMBER: 15-299-22
DATE: 08/02/22
MC-10219467-0001.pdf 1843.38KB
- ✅ START YOUR VEHICLE REMOTELY- Use the most complete Plug N Play Remote Starter KIT to warm up your vehicle in those freezing mornings. No more waiting 10 min to defog your windshield. 😊 Press lock 3 times on your existing remote, to remote start.
- ✅ START-X T-HARNESS – This kit includes a unique Start-X T-harness that greatly simplifies the install. There is zero wire splicing or cutting involved, completely plugs into the factory connectors.
- ✅ COMPATIBILITY – This kit is compatible only with a Subaru
Legacy and Outback 2010-2014. 🔴🔴 Only compatible if you start your vehicle by turning a key blade. Will not work if it's a push to start engine button. Will only work if the vehicle has an automatic transmission. Factory key required. 🔴🔴 2010 2011 2012 2013 2014.
- ✅ Windows PC Required – Pairing the remote starter to the vehicle requires the remote starter to be connected to a windows computer with a USB updater tool. The tool is included in the kit.
- ✅ USA- This kit is brought to you by Start-X, the leading plug n play remote start company in North America. The remote Start module is proudly designed, engineered, and manufactured in North America. With tens of thousands of satisfied customers, you can't go wrong. Start-X technical support agents are located in the USA and provide support in English.
- ✅ START YOUR VEHICLE REMOTELY- Use the most complete Plug N Play Remote Starter KIT to warm up your vehicle in those freezing mornings. No more waiting 10 min to defog your windshield. 😊 Press lock 3 times on your existing remote, to remote start. 🔴🔴 Forester 2022 - 2023, while the vehicle is remotely started the OEM remote. will not work to unlock. You will need to physically insert the key to unlock. For all other vehicle's the OEM remote will work to unlock.
- ✅ START-X T-HARNESS – This kit includes a unique Start-X T-harness that greatly simplifies the install. There is zero wire splicing or cutting involved, completely plugs into the factory connectors. Watch the video to see how easy it is.
- ✅ COMPATIBILITY – This kit is compatible only with a Subaru
Forester 2019-2021, Legacy 2018-2019, and Outback 2018-2019 Push to Start Engine Button vehicles. 🔴🔴 Will NOT work if your vehicle is Canadian. 🔴🔴 2018 2019 2020 2021 2022 2023. NOT compatible with key blade turn start vehicles. Factory remote required.
- ✅ WINDOWS COMPUTER REQUIRED – Pairing the remote starter to the vehicle requires the remote starter to be connected to a windows computer with a USB updater tool. The tool is included in the kit.
- ✅ USA- This kit is brought to you by Start-X, the leading plug n play remote start company in North America. The remote Start module is proudly designed, engineered, and manufactured in North America. With tens of thousands of satisfied customers, you can't go wrong. Start-X technical support agents are located in the USA and provide support in English.
- Remote engine start kit
- H001SFN000
- PUSH START MODELS
- 2024 Impreza
- 2024 2025 Crosstrek
- Subaru
Genuine Part Number: H001SSG502
- Replaces: H001SSG501 and H001SSG500
- Forester: 2015-2018
- Remote Start Kit
- Genuine Subaru
Part Number: H001SAL101
- For Vehicles with Push Start
- Legacy 2015-2018
- Outback 2015-2018
- Remote engine start kit for 2020-2025 Legacy or 2020-2025 Outback
- H001SAN001
- Allows vehicle to be started by pushing a button from the convenience of home or the office (up to 400 feet away depending on obstructions) so that the vehicle’s interior temperature is more comfortable upon entry.
- Push Start works in conjunction with the Keyless Access and Start system. This Genuine Subaru Accessory is an alternative for customers who do not enroll in STARLINK Safety and Security Plus
- Will need a Subaru
SSM3 scan tool for completion, just swing by a Subaru
dealer after install.
- Fits 2015-2018 Subaru
Legacy/Outback w/ Turn Key Start
- Pre-heat or pre-cool the vehicle's interior without entering your vehicle
- Fully integrated into the vehicle's existing factory security/keyless entry system
- Part Number H001SAL002
- Genuine Subaru
Remote Engine Starter ? (FOR PUSH START FORESTER)
- H101SSJ000
- Allows vehicle to be started by pushing a button from the convenience of home or the office (up to 400 feet away depending on obstructions) so that the vehicle’s interior temperature is more comfortable upon entry.
- Push Start works in conjunction with the Keyless Access and Start system.
- The start/stop button blinks to confirm the engine has been started.
- Genuine Subaru
Remote Engine Starter (For Key Start)
- H001SXC100
- Allows vehicle to be started by pushing a button from the convenience of home or the office (up to 400 feet away depending on obstructions) so that the vehicle’s interior temperature is more comfortable upon entry. The start/stop button blinks to confirm the engine has been started. Applicable to CVT models only.
- 2019 2020 2021 2022 ASCENT
- Remote engine start kit for 2019- 2022 Forester applicable to push start models only
- H001SSJ001 (replaces H001SSJ000)
- Allows vehicle to be started by pushing a button from the convenience of home or the office (up to 400 feet away depending on obstructions) so that the vehicle’s interior temperature is more comfortable upon entry.
- Push Start works in conjunction with the Keyless Access and Start system. This Genuine Subaru Accessory is an alternative for customers who do not enroll in STARLINK Safety and Security Plus.
SEOCONTENT-START
Bulletin Number: 15-299-22; Date: 08/02/22 Page 1 of 3 SERVICE BULLETIN Continued… CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS. Subaru Service Bulletins are intended for use by professional technicians ONLY. They are written to inform those technicians of conditions that may occur in some vehicles, or to provide information that could assist in the proper servicing of the vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do the job correctly and safely. If a condition is described, DO NOT assume that this Service Bulletin applies to your vehicle, or that your vehicle will have that condition. Subaru
of America, Inc. is ISO 14001 Compliant ISO 14001 is the international standard for excellence in Environmental Management Systems. Please recycle or dispose of automotive products in a manner that is friendly to our environment and in accordance with all local, state and federal laws and regulations. NUMBER: 15-299-22 DATE: 08/02/22 APPLICABILITY: 2019 MY Outback & Legacy / Key Start Ignition SUBJECT: Remote Engine Starter (RES) / Intermittent Horn Beeping Discontinued Part Number H001SAL003 INTRODUCTION: This bulletin announces an application change to the Remote Engine Starter (RES) control unit on 2019 Outback & Legacy models. The change was incorporated to address a small number of incidents concerning unintentional horn beeping on vehicles fitted with an RES system. A customer may experience 1-4 horn beeps while the vehicle is being driven or at vehicle start-up with the ignition key. This concern may repeat at random times with varied gaps between occurrences. If this issue is duplicated, replacement of the RES control module and installation of the hood switch/ bracket will be required. Please review the parts application information outlined within this bulletin. PRODUCTION CHANGE INFORMATION: The RES installation kit applicability for MY19 has been changed from H001SAL003 to H001SAL002 (also applicable to MY18). Part Description Part Number MY18 & MY19 Remote Engine Starter H001SAL002 DISCONTINUED MY19 Remote Engine Starter ECU H001SAL022 DISCONTINUED MY19 Remote Engine Starter Kit H001SAL003 PART INFORMATION: REMINDER: Always order the most up-to-date replacement parts based on the specific VIN being repaired. Part Description Part Number REMOTE ENGINE START ECU H001SAL021 HOOD SWITCH / BRACKET H001SAL040 ATTENTION: GENERAL MANAGER q PARTS MANAGER q CLAIMS PERSONNEL q SERVICE MANAGER q IMPORTANT – All Service Personnel Should Read and Initial in the boxes provided, right. ©2022 Subaru
of America, Inc. All rights reserved. Bulletin Number: 15-299-22; Date: 08/02/22 Page 2 of 3 Continued… BOTH part numbers H001SAL021 (RES Control Module) and H001SAL040 (Hood Switch & Bracket) are required. The components included are shown below. IMPORTANT: Always confirm that the subject vehicle does not already contain the applicable part numbers and does contain the non-applicable part numbers prior to proceeding with any repairs. See below for details. Applicable Legacy/Outback Key Start RES Kit • Subaru
RES Installation Kit Part #H001SAL002 • Voxx RES Control Module Part #4360616 (shown on the upper label) • SPN0001851 (shown on the lower label) Non-Applicable Legacy/Outback Key Start RES Kit • Subaru
RES Installation Kit Part #H001SAL003 • Voxx RES Control Module Part #4360783 (Shown on the upper label) • SPN0003361 (Shown on the lower label) SERVICE PROCEDURE INFORMATION: Bulletin Number: 15-299-22; Date: 08/02/22 Page 3 of 3 REMINDER: Customer satisfaction and retention starts with performing quality repairs. Service procedures for the RES Control Module and the Hood Switch replacement remain unchanged. Always refer to the Accessory Installation Guide and review the full requirements of the repair being performed. The Guide procedures contain information critical to performing an effective repair the first time, every time. See installation STIS instruction link for Part Number SPN0004850 referencing the two part numbers noted above. WARRANTY / CLAIM INFORMATION: This repair may be submitted for vehicles covered by an active Subaru
Added Security Gold plan. The Parts Warranty is 1 year from the date of purchase (regardless of mileage) and for the period of coverage remaining on the Basic New Car Warranty, whichever is longer. Labor Description Labor Operation # Labor Time Fail Code REMOTE START CONTROL MODULE R&R AND UNDER HOOD SWITCH INSTALL B091-109 0.5 ZNH42 REMOTE START TESTING & DIAGNOSIS C091-100 0.4 IMPORTANT REMINDERS: • SOA strongly discourages the printing and/or local storage of service information as previously released information and electronic publications may be updated at any time. • Always check for any open recalls or campaigns anytime a vehicle is in for servicing. • Always refer to STIS for the latest service information before performing any repairs.
SEOCONTENT-END
Last update on 2025-04-15 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.