ECM Reprogramming Availability for DTC P0244 – 2014 Subaru Forester Turbo

NUMBER: 11-132-13
DATE: 07/03/13

 

APPLICABILITY: 2014MY Forester Turbo Models
SUBJECT: ECM Reprogramming Availability for DTC P0244

 

INTRODUCTION

This Bulletin announces the availability of ECM reprogramming files to address an improper judgment of intake manifold pressure when the engine is cold which could cause DTC P0244 to set.  These files are included in the July, 2013 SSMIII Software Update, Version 1.38.52.7.

 

PACK FILE APPLICABILITY

EMISSION SPEC. PAK FILE NAME NEW ECM PART NUMBER OLD ECM PART NUMBERS NEW CID NUMBER TRANSMISSION
FED, CAL 22611AW062.PAK 22611AW062 22611AW060 AF56600B CVT
22611AW061

 

COUNTERMEASURE IN PRODUCTION

CAR LINE MODEL STARTING VIN
Forester Turbo E*439234

 

SERVICE PROCEDURE / INFORMATION

IMPORTANT:  In the event of an ECM replacement, always confirm the new ECM has the most recent software and CID number installed before releasing the vehicle.

 

WARRANTY / CLAIM INFORMATION

For vehicles within the Basic New Car Limited and/or Emissions Warranty period, this repair may be claimed using the following information:

LABOR DESCRIPTION LABOR OPERATION # FAIL CODE LABOR
TIME
MFI OBDII ECM Reprogramming A455-288 UPG-48 0.4

 

https://static.nhtsa.gov/odi/tsbs/2013/SB-10065793-3639.pdf

Download (PDF, 433KB)

 


 

J2534 Reprogramming

Subaru reprogramming files using a generic (non-OEM) SAEJ2534 pass-thru vehicle programming device are available by contacting Service Technical Information Company toll free at 1-866-428-2278. The cost for the CD-ROM with all reprogramming files is $75.00 plus S/H and applicable state tax. Files will be updated four (4) times per year, in CD-ROM format, with all available reprogramming service information at the same above offered cost. Authorized Subaru Dealers are provided the same reprogramming information.

Before purchasing, the reprogramming details can be found in the following Reprogramming J-2534 Files chart. Click the link to view the PDF chart.

Subaru J2534 Reprogramming software meets the latest available J2534-1 specification. Our Reprogramming J2534 Files chart does not specify the Calibration Identification Number (CID); however, this information is included in our offered CD-Rom.

Note: The ECM or TCM being reprogrammed may already contain some or all of the reprogramming files listed in the Reprogramming J2534 Files chart shown by release date. It is possible to damage the vehicles ECM/TCM during the reprogramming event. Once the reprogramming process has started, it is recommended not to interrupt the process until the event is completed. If you experience any problems, please contact your scan tool maker for further instructions.

Are all pre-2004MY Subaru vehicles compatible with J2534?

No. Subaru has no reprogramming capability for model years 1996-1998. Starting with our 1999 model year, please see our Reprogramming Pre-J2534 Files chart for affected model reprogramming information.

Both pre-J2534 reprogramming and J2534 pass thru reprogramming files are included in the offered HDS kit software for aftermarket service provider application.

techinfo.subaru.com

 

 

Leave A Comment

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.