SUBARU STARLINK® Owner’s Manual – 2024 Subaru WRX

SEOCONTENT-START

This supplement contains explanations and instructions for correctly operating the following systems. · Navigation System · Audio and Visual System · Handsfree System · APPS If your vehicle contains one of the systems above, be sure to check the contents of this supplement carefully. If you transfer the ownership of the vehicle to another person, make sure that this supplement is provided with the Owner’s Manual inside the vehicle. The information, specifications and illustrations found in this Owner’s Manual supplement are those in effect at the time of printing. SUBARU CORPORATION reserves the right to change specifications and designs at any time without prior notice and without incurring any obligation to make the same or similar changes on vehicles previously sold. This Owner’s Manual supplement applies to all models, and describes all devices, including manufacturer-installed options. This means that information may be included about devices that are not installed in your vehicle. Please be aware that the content of this Owner’s Manual supplement may be different from the system in some cases, such as due to software updates and changes to specifications. Refer to P.14 for details on each of the different models. Foreword SUBARU STARLINK is the “in-car connectivity system” available on select Subaru vehicles. SUBARU CORPORATION, TOKYO, JAPAN “SUBARU” and the six-star cluster design are registered trademarks of SUBARU CORPORATION. ©Copyright 2024, SUBARU CORPORATION 1 TABLE OF CONTENTS Quick Guide Basic Function Settings Phone Apps Audio Navigation System (If equipped) Voice Recognition System Appendix/What To Do If/Index 1 2 3 4 5 6 7 8 9 2 · System Types. 14 · Dual 7.0-inch Display System. 15 · 11.6-inch Display System/11.6-inch Display With Navi System. 39 · Basic Information Before Operation. 68 · Registering A Bluetooth Phone/Device For The First Time. 80 · Registering A Bluetooth Phone/Device. 84 · Phone Settings. 83 · Setting Driver Profiles. 92 · General Settings. 94 · Sound Settings. 101 · Radio Settings. 102 · Calling On The Bluetooth Phone. 112 · Receiving On The Bluetooth Phone. 115 · Talking On The Bluetooth Phone. 116 · Bluetooth Phone Message Function. 119 · Apple CarPlay. 129 · Android Auto. 133 · SiriusXM Travel Link. 137 · Basic Operation. 146 · Radio Operation. 153 · Media Operation. 165 · Audio Remote Controls. 183 · Map Screen. 196 · Main Menu Screen. 203 · Route Guidance. 212 · Setup. 219 · SUBARU Map Update. 223 · Voice Recognition System Operation. 228 · Troubleshooting. 243 · Index. 254 13 67 79 107 125 145 195 227 237 3 INTRODUCTION INTRODUCTION The symbols described below are found in this instruction manual as well as on the unit itself to ensure its proper and safe usage and to prevent injury or damage to property. Make sure you understand the meaning of these symbols before reading the rest of this manual. READ FIRST We recommend that you wait until the positioning stabilizes before starting to drive. If you start to drive while the positioning is not complete, the indicated position may differ from the actual vehicle position. The screens shown in this manual may differ from the actual screens depending on the data type or when the map data was created. When maps are created, land surveys are conducted and information on road improvements and reopening is collected to provide the most accurate information possible. However, modifications to roads, place names and facilities may be carried out at any time. Consequently, we cannot guarantee that map data contains no errors in road positions, configuration and names, or in facility names. INTRODUCTION 4 Information in this manual that must be observed for the unit, and information that is useful to know is indicated as follows. WARNING llThis sign indicates a situation in which incorrect handling through disregard of written information might result in death or serious personal injury. CAUTION llThis sign indicates a situation in which incorrect handling through disregard of written information might result in personal injury or damage to property. NOTE llUseful information for the user is described. SYMBOLS USED IN ILLUSTRATIONS Safety symbol The symbol of a circle with a slash through it means “Do not”, “Do not do this” or “Do not let this happen”. Arrows indicating operations I ndicates the action (selecting, turning, etc.) used to operate switches and other devices. INTRODUCTION INTRODUCTION 5 PRECAUTIONS FOR USE WARNING llThe main unit requires a 12 V DC power supply. The main unit should not be installed in any vehicle which does not have a 12 V power system with a ground-connected negative side. An installation other than the one intended may cause severe damage to the main unit, and electric shock or serious injury to the users. llEven when using the route guidance of the navigation system, be sure to drive by following the actual traffic regulations. If you drive by following only the route guidance of the navigation system, you may violate the actual traffic regulations and cause a traffic accident. llTo ensure safety, the driver should not operate the navigation system while driving. Operating the navigation system while driving may result in an accidental steering wheel operation or otherwise cause an accident. Stop the vehicle before operating the navigation system. Also, do not watch the screen while driving because doing so may be dangerous (ETC). Inattention to road conditions ahead may result in an accident. llThe driver should not perform operations such as volume adjustment while driving. Inattention to road conditions ahead may result in an accident, so be sure to stop the vehicle in a safe place before performing the operation. llThe driver should not change discs while driving. Inattention to road conditions ahead may result in an accident, so be sure to stop the vehicle in a safe place before performing the operation.* llThe driver should not perform operations such as adding a location or setting the memory while driving. Inattention to road conditions ahead may result in an accident, so be sure to stop the vehicle in a safe place before performing the operation. llBefore viewing a video, be sure to stop the vehicle in a safe place and apply the parking brake. To ensure safety, videos are not displayed during driving. llTo ensure safety, never operate a cell phone while driving. llDo not let foreign objects enter the disc slot. Doing so may result in a fire or electric shock.* llDo not disassemble or modify the unit. Doing so may result in an accident, fire or electric shock. llDo not let water or foreign objects enter the internal parts of the unit. Doing so may result in smoke, fire or an electric shock. llDo not use the unit when it is malfunctioning, such as when the screen is not lit or no sound comes out. Doing so may result in an accident, fire or electric shock. llAlways replace fuses with fuses of the same specified capacity (amperage). Using a fuse with a higher capacity than the specification may result in a fire. llIf a foreign object or water enters the unit, smoke or a strange odor may be emitted. If such an abnormality occurs, stop using the unit immediately and contact your SUBARU dealer. An accident, fire or electric shock may result if you continue to use the unit under these conditions. llIn a thunderstorm, do not touch the antenna line or the unit. Lightning may cause an electric shock. llDo not park or stop in prohibited areas to use the unit. llIf direct sunlight shines into the vehicle, light may reflect off the product. Be very careful while driving. llNever use headphones or earphones while driving. Driving while not being able to hear sounds from outside the vehicle may result in a traffic accident. *: If equipped with a CD player INTRODUCTION 6 CAUTION llAlthough the unit can be used when the ignition switch is set to either “ACC” or “ON” position, to protect the battery, start the engine before using the unit. llDo not use the unit anywhere other than in a vehicle. Doing so may result in an electric shock or other injury. llWhile driving, keep the volume low enough for you to hear outside sounds. Driving while not being able to hear sounds from outside the vehicle may result in an accident. llBe careful of the volume when turning on the power. If a loud noise is emitted suddenly when you turn on the power, it may damage your hearing. llDo not apply a strong force to the display. Doing so may result in a malfunction. llDo not put your fingers or hands into the disc slot. Doing so may result in an injury.* llDo not touch the hot parts of the unit. The hot parts may burn you. llDo not use while there is an abnormality such as sound breakup or distortion. Doing so may result in a fire. llUsing the unit during extremely high or low temperature may result in mistaken operation or a malfunction. In particular, the temperature inside the vehicle can often rise to a high level during the summer. Cool the vehicle, for example by opening a window, before using the unit. llBe careful if metal or water enters the unit, or the unit is exposed to a strong impact, because it may result in a malfunction. llThe touch buttons on the display screen may not operate correctly if condensation forms inside them. If this happens, do not attempt to operate the switches until the condensation has disappeared. llIf juice or similar liquid is spilled on the display, wipe off immediately. Failure to do so may result in product malfunction. llThe screen is easily marked by fingerprints and tends to attract dust, and should therefore be cleaned occasionally. When cleaning, turn off the power, and wipe lightly with a soft, dry cloth. To remove dirt, soak a soft cloth in neutral detergent and squeeze well before wiping. Do not use a wet floor-cloth, organic solvents (benzene, ethanol, thinner, etc.), acids, or alkalis. Using such agents will result in screen deterioration. Furthermore, do not hit the screen or rub it with hard objects. *: If equipped with a CD player INTRODUCTION INTRODUCTION 7 NOTE llSUBARU CORPORATION is not responsible for any damages to the purchaser or third parties that occur from using the map data. llWe do not provide any replacements or refunds for any mistakes there may be in the map data displays or contents, such as misspelling, omissions or misaligned positions. llSUBARU CORPORATION makes no guarantee that the functions included in the map data will be appropriate for the specific objectives of the purchaser. llFunctions that cannot be operated while driving have their colors toned down when the vehicle is being driven, and their operation is disabled. Touching a disabled switch may result in the display of an operation prohibited message on the screen. llDuring strong vibrations, such as when driving on a poor road surface, the unit may no longer be able to read the data from the disc, and it will not operate correctly. When the vibration lessens, normal operation will return after a short time.* llImmediately after turning on the heater when the temperature is low, dew (water drops) may adhere to the lens of the CD reader (condensation). If this happens, leaving the unit for about an hour should remove the condensation and return the unit to normal operation. If the unit does not return to normal operation even after several hours, contact your SUBARU dealer.* llWhen using the unit for the first time after purchase, or after the battery was removed for a long time, the current position may not be displayed correctly. Wait a short time until the GPS positioning corrects the displayed position. llThis device is precision-engineered equipment and the recorded data can be lost as a result of static electricity, electrical noise, vibration, or other influences. To protect the device against data loss, we recommend keeping a separate record of the data that you record after purchase. NOTE llThe screen may be adversely affected or disturbed by noise if electrical equipment that generates powerful electrical noise is used near the system. In such cases, keep the electrical equipment at a distance, or refrain from use. llThe display may appear brighter when the temperature is low, or immediately after starting the engine, however, this is a characteristic of the LED elements, and does not indicate a fault. The display will return to its original brightness when the vehicle cabin has warmed up. llWhen you look at the screen through polarized material such as polarized sunglasses, the screen may be dark and hard to see. If so, look at the screen from different angles, adjust the screen settings on the general settings screen or take off your sunglasses. llIt may be difficult to view the screen if the display is exposed to sunlight from an awkward angle. llThe LCD screen may not function normally if covered with a protective film. Do not affix a protective film. llThe touch panel may function incorrectly or fail to respond if operated with objects other than fingers (nails, operation when wearing gloves, pens, etc.) llIf the system functions unexpectedly such as an area other than the one touched being selected, or failure to respond when touched, there is a possibility that another finger or part of the hand is in contact with display. llScratches on the system panel surface are easily noticeable, and it should therefore be handled with care. llIf a device that uses wireless communication is installed in the vehicle, functions using a Bluetooth device, the radio broadcast receiver, navigation system, etc. may not operate properly. *: If equipped with a CD player INTRODUCTION 8 WHEN TRANSFERRING OWNERSHIP OF THE VEHICLE CAUTION: When transferring ownership of your vehicle, delete the personal information registered in the vehicle by performing a Factory Data Reset. For details about the Factory Data Reset, refer to the “GENERAL SETTINGS SCREEN” section. (→P.94) Note that certain personal information inputted in the system and the phone number of any paired device will remain in vehicle data logs even after the Factory Data Reset. These data logs are strictly for quality assurance purposes and not viewable by any subsequent purchaser. To have those logs deleted permanently from the vehicle, please contact your SUBARU dealer. SAFETY INSTRUCTION (11.6-inch display system/Dual 7.0-inch display system only) To use this system in the safest possible manner, follow all the safety tips shown below. Do not use any feature of this system to the extent it becomes a distraction and prevents safe driving. The first priority while driving should always be the safe operation of the vehicle. While driving, be sure to observe all traffic regulations. Prior to the actual use of this system, learn how to use it and become thoroughly familiar with it. Read the entire manual to make sure you understand the system. Do not allow other people to use this system until they have read and understood the instructions in this manual. For your safety, some functions may become inoperable when driving. Unavailable screen buttons are dimmed. INTRODUCTION INTRODUCTION 9 WARNING llFor safety, the driver should not operate the system while he/she is driving. Insufficient attention to the road and traffic may cause an accident. SAFETY INSTRUCTION (11.6-inch display with Navi system only) To use this system in the safest possible manner, follow all the safety tips shown below. This system is intended to assist in reaching the destination and, if used properly, can do so. The driver is solely responsible for the safe operation of your vehicle and the safety of your passengers. Do not use any feature of this system to the extent it becomes a distraction and prevents safe driving. The first priority while driving should always be the safe operation of the vehicle. While driving, be sure to observe all traffic regulations. Prior to the actual use of this system, learn how to use it and become thoroughly familiar with it. Read the entire manual to make sure you understand the system. Do not allow other people to use this system until they have read and understood the instructions in this manual. For your safety, some functions may become inoperable when driving. Unavailable screen buttons are dimmed. Only when the vehicle is not moving, can the destination and route selection be done. WARNING llFor safety, the driver should not operate the system while he/she is driving. Insufficient attention to the road and traffic may cause an accident. llWhile driving, be sure to obey the traffic regulations and maintain awareness of the road conditions. If a traffic sign on the road has been changed, route guidance may not have the updated information such as the direction of a one way street. INTRODUCTION 10 While driving, listen to the voice instructions as much as possible and glance at the screen briefly and only when it is safe. However, do not totally rely on voice guidance. Use it just for reference. If the system cannot determine the current position correctly, there is a possibility of incorrect, late, or non-voice guidance. The data in the system may occasionally be incomplete. Road conditions, including driving restrictions (no left turns, street closures, etc.) frequently change. Therefore, before following any instructions from the system, look to see whether the instruction can be done safely and legally. This system cannot warn about such things as the safety of an area, condition of streets, and availability of emergency services. If unsure about the safety of an area, do not drive into it. Under no circumstances is this system a substitute for the driver’s personal judgement. Use this system only in locations where it is legal to do so. Some states/provinces may have laws prohibiting the use of video and navigation screens next to the driver. INTRODUCTION INTRODUCTION 11 HOW TO READ THIS MANUAL No. Name Description Operational Outlines An outline of the operation is explained. Main Operations The steps of an operation are explained. Supplemental information Describes supplemental information relating to main operation. ●●When a panel button should be selected, button names are shown as . ●●When a touch button on the screen should be selected, button names are shown as . INTRODUCTION 12 Quick Guide 13 Quick Guide (DUAL 7.0-INCH DISPLAY SYSTEM) System Types 14 Dual 7.0-inch Display System Function Overview 15 Main Product Features 16 Basic Function 19 Button Overview ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž19 Home Screen ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž20 Car Information/Climate Control Screen ž ž ž ž ž ž ž ž ž ž22 Pairing The System With A Bluetooth Phone/Device žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž23 Adding A Bluetooth Phone/Device ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž24 Create A Driver Profile žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž25 Phone Screen žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž26 Apps Screen ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž29 Radio Screen žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž32 Useful SiriusXM® Radio Functions ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž33 Media Screen žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž34 Loading And Unloading A Disc žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž35 Connecting A USB Memory Device/ Portable Device žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž35 Settings Screen ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž36 Steering Wheel Controls 38 Steering Wheel Controls ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž38 11.6-inch Display System/ 11.6-inch Display With Navi System Function Overview 39 Main Product Features 40 Basic Function 43 Overview žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž43 Home Screen ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž44 Pairing The System With A Bluetooth Phone/Device žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž46 Managing A Bluetooth Phone/Device žž ž ž ž ž ž ž ž ž ž ž ž ž47 Create A Driver Profile žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž48 Car Information Screen žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž49 Phone Screen žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž50 Map Screen ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž54 Radio Screen žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž56 Useful SiriusXM® Radio Functions ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž57 Media Screen žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž58 Loading And Unloading A Disc žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž59 Connecting A USB Memory Device/ Portable Device žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž59 Apps Screen ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž60 Settings Screen ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž63 Steering Wheel Controls 65 Steering Wheel Controls ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž65 SYSTEM TYPES 14 P.15 P.39 SYSTEM TYPES This Owner’s Manual describes the following three types of system. Dual 7.0-inch display system 11.6-inch display system 11.6-inch display with Navi system Two 7.0-inch touch screen Display audio system 11.6-inch touch screen Display audio system 11.6-inch touch screen Display audio with Navigation system P.39 FUNCTION OVERVIEW 15 1 Quick Guide (DUAL 7.0-INCH DISPLAY SYSTEM) FUNCTION OVERVIEW FUNCTION OVERVIEW Features: – Two 7.0-inch touch screens 7.0-inch touch screen 7.0-inch touch screen MAIN FUNCTIONS Pairing (Bluetooth 4.2) P.23 Apps P.29 Apple CarPlay P.129 Android Auto P.133 AM/FM radio P.32 HD Radio receiver P.155 SiriusXM® radio P.33 Media operation CD*: P.165 USB: P.167 iPod/iPhone: P.169 Bluetooth audio: P.172 AUX: P.176 Phone P.26 Voice recognition system P.228 Valet mode P.18 Steering wheel controls P.38 Rear view camera Car settings/informations Refer to the vehicle Owner’s Manual. Climate controls *: If equipped with a CD player MAIN PRODUCT FEATURES 16 MAIN PRODUCT FEATURES Adoption of intuitive and easy-to-use smartphone-like graphical user interface Meter cluster linked display Two 7.0-inch touch screen displays have been adopted. Information can be displayed seamlessly between these displays and the display in the meter cluster. Function description display function Function descriptions or operation hints can be displayed when an icon displayed next to the name of a function. MAIN PRODUCT FEATURES 17 1 Quick Guide (DUAL 7.0-INCH DISPLAY SYSTEM) P.133 P.129 Apple CarPlay/Android Auto Support for Apple CarPlay and Android Auto allows access to functions such as maps, phone calls, and music. Customized home screen layout Frequently used functions and operations can be added to the home screen. P.77 Example: For calling specific phone numbers, listening to FM radio stations, etc. The position of screen buttons can be changed by selecting and holding it, then dragging it to the desired position. MAIN PRODUCT FEATURES 18 Valet mode Valet mode restricts operations of the system when valet parking is used, to prevent unwanted access to personal information stored in the system. To enable/disable valet mode, enter a password preset by the user. Refer to the vehicle Owner’s Manual. System and Bluetooth phone/device pairing Functions such as hands-free and applications can be used by connecting the system with Bluetooth phones/devices wirelessly. P.23 BASIC FUNCTION 19 1 Quick Guide (DUAL 7.0-INCH DISPLAY SYSTEM) BASIC FUNCTION BUTTON OVERVIEW TOUCH SCREEN Operations are performed by touching the touch screen directly with your finger. P.71 Drag Display the home screen. Turn the knob to adjust the volume. Press the knob to turn the volume mute on/off. Press and hold the knob to turn the audio system off. To turn the audio system on, press and hold the knob again or press . Press and hold the knob for 10 seconds or longer to reset the system if the touch screens become unresponsive during operation or if any other system error occurs. Shortcut to each screen Turn the knob to select a radio station or skip to the next or previous track/file. Press and hold the knob to display the sound customization screen. P.149 Radio P.32 Phone P.26 Apps P.29 Media P.34 BASIC FUNCTION 20 HOME SCREEN Radio SCREEN Apps SCREEN Settings SCREEN Media SCREEN Phone SCREEN P.29 P.36 P.26 P.32 P.34 Set a driver profile Status display P.76 P.25,92 While Apple CarPlay or Android Auto is being used, an Apple CarPlay or Android Auto icon will be displayed on the home screen. P.129,133 BASIC FUNCTION 21 1 Quick Guide (DUAL 7.0-INCH DISPLAY SYSTEM) Add Shortcut Valet Mode Refer to the vehicle Owner’s Manual. Turn the display off. To turn the display on, press and hold the “ ” knob or press . Frequently used functions and operations can be added to the home screen. Button positions can be changed freely. P.77 P.78 BASIC FUNCTION 22 CAR INFORMATION/CLIMATE CONTROL SCREEN Displays the operating status of vehicle functions, vehicle status, and vehicle inclination. Refer to the vehicle Owner’s Manual. The settings of driving related functions etc. can be changed. Refer to the vehicle Owner’s Manual. The settings of various vehicle related functions can be changed. For settings related to EyeSight, refer to the Owner’s Manual supplement for the EyeSight system. For all other functions and settings, refer to the vehicle Owner’s Manual. Setup and display vehicle part replacement intervals. Refer to the vehicle Owner’s Manual. Displays the operating status of climate control. Refer to the vehicle Owner’s Manual. BASIC FUNCTION 23 1 Quick Guide (DUAL 7.0-INCH DISPLAY SYSTEM) PAIRING THE SYSTEM WITH A Bluetooth PHONE/DEVICE Display the phone screen. Prepare the Bluetooth phone/device to be paired. Operate the Bluetooth phone/device. Follow instructions displayed to operate the Bluetooth phone/device. Register the Bluetooth phone/device. If unable to pair, check whether your Bluetooth phone/device is compatible with the system. If a confirmation message appears asking whether to transfer the phone’s contact data to the system, select the appropriate button. BASIC FUNCTION 24 ADDING A Bluetooth PHONE/DEVICE Adding from the phone screen Adding from the Bluetooth audio screen Adding from the settings screen BASIC FUNCTION 25 1 Quick Guide (DUAL 7.0-INCH DISPLAY SYSTEM) Add a new profile. Registering a Bluetooth phone Enter a name. Procedure complete. CREATE A DRIVER PROFILE Select a language. BASIC FUNCTION 26 Phone SCREEN Directly input a number to place a call P.114 Call or send a text message* to a registered favorite P.113,122 Call or send a text message* to a recent contact P.112,122 Call or send a text message* to a contact in the phonebook on the Bluetooth connected phone P.114,122 Check or reply* to messages/place calls from received message list P.121,122,123 *: If available (for iOS only reception possible) BASIC FUNCTION 27 1 Quick Guide (DUAL 7.0-INCH DISPLAY SYSTEM) – Operation Flow: Receiving Calls and Using the Bluetooth Phone – – Operation Flow: Placing Calls from the Phonebook – Incoming call screen is displayed. In-call screen is displayed. End call Mute the connected smartphone’s voice Keypad Transfer call to Bluetooth phone Start three-way call Switch to call with other party In-call screen display and operation may differ, or may not be possible depending on the Bluetooth phone used. Select call recipient from phonebook. The notification setting on the Bluetooth phone may need to be activated in order to download the phonebook. If the phonebook download setting is off and a phonebook has not been downloaded, a message will be displayed and the phonebook of the connected Bluetooth phone can be downloaded. Place call Select number for making call. P.91 BASIC FUNCTION 28 – Operation Flow: Receiving a Message* – – Operation Flow: Sending a Message* from the Phonebook – Incoming text screen is displayed. Message screen is displayed. Having messages read out Calling the message sender Replying to a message Select a contact from phonebook. The notification setting on the Bluetooth phone may need to be activated in order to download the phonebook. If the phonebook download setting is off and a phonebook has not been downloaded, a message will be displayed and the phonebook of the connected Bluetooth phone can be downloaded. Select the message icon next to the desired number. Send message. When there are unread messages in the message inbox *: If available (for iOS only reception possible) Select message. P.91 BASIC FUNCTION 29 1 Quick Guide (DUAL 7.0-INCH DISPLAY SYSTEM) Apps SCREEN Usable applications Apple CarPlay Apple CarPlay can be used to view Apple Maps, play music, and place calls by connecting an Apple CarPlay device to the system. Supported applications can also be run. To use the Apple CarPlay application, connect an Apple CarPlay device to the USB port with undamaged genuine USB cable. For details on the services or the operations, check the Apple CarPlay site (https://www.apple.com/ios/carplay/). P.129 BASIC FUNCTION 30 Android Auto Android Auto can be used to view Google Maps, play music, and place calls by connecting an Android Auto device to the system, using USB cable and Bluetooth. Supported applications can also be run. To use the Android Auto application, connect your Android Auto device to the USB port with undamaged genuine USB cable. For details on the services or the operations, check the Android Auto site (https://www.android.com/auto/) and (https://support.google.com/androidauto/). P.133 BASIC FUNCTION 31 1 Quick Guide (DUAL 7.0-INCH DISPLAY SYSTEM) SiriusXM Travel Link is a service provided by SiriusXM® Radio, and can be used to view information on fuel prices, sports, stocks, weather, weather alerts and parking. To receive the data service information in the vehicle, a subscription to the SiriusXM® Radio Service is necessary following a free trial. SiriusXM Travel Link Fuel prices Weather Sports Weather alerts Stocks Parking P.161 P.137 BASIC FUNCTION 32 Radio SCREEN Change radio mode Select to scan for receivable stations/channels. Select to display a list of receivable stations (AM/FM). Select to turn HD Radio mode on/off (AM/FM). Select to search for stations/channels by entering frequency/ channel number. Preset stations/channels Select to change multicast channels available (FM). PAUSE AND PLAYBACK LIVE RADIO Depending on the radio broadcast, the broadcast can be temporarily saved and played back later. Skip backward Skip forward Pause/play P.157 BASIC FUNCTION 33 1 Quick Guide (DUAL 7.0-INCH DISPLAY SYSTEM) – Operation Flow: Presetting a Radio Station – USEFUL SiriusXM® Radio FUNCTIONS ●● For you: Displays content suggestions based on the registered descriptions of driver profile and history of SiriusXM contents access. ●● Categories: Displays a channel list by category. ●● Related: Display a list of contents related to the current content you are listening to. Select and hold one of the preset buttons. Mix preset function Multiple stations can be registered as presets. (AM, FM or SiriusXM® Radio) Select the radio band and the radio station. A valid subscription to SiriusXM® Radio is required to receive satellite radio service. Register the radio station. P.154,163 P.159 P.159 P.159 BASIC FUNCTION 34 Media SCREEN Change media source Random playback on/off Change tracks Select and hold to fast rewind Change to other Bluetooth audio device/ register new device (Bluetooth audio) Change tracks Select and hold to fast forward Pause/play Playback tracks and programs, etc. in a variety of playback modes SUPPORTED MEDIA CD*1 USB/iPod/iPhone Bluetooth audio P.190 P.81 Audio CDs*1: Repeat all tracks → repeat current track → cancel repeat Media other than audio CDs: Repeat all tracks*2 → repeat current album/folder → repeat current track → cancel repeat *1: If equipped with a CD player *2: Operable when USB Audio is used and Folders (Folders) is selected from (Browse) P.187 BASIC FUNCTION 35 1 Quick Guide (DUAL 7.0-INCH DISPLAY SYSTEM) – Operation Flow: Using Playback Modes – Display the playback mode list. Select the playback mode. Play a track. Depending on the audio source, several items from these categories are displayed in a list. Connecting a USB Memory Device / Portable Device Loading and Unloading a disc* *: If equipped with a CD player Loading a disc Unloading a disc Insert the disc with the label side facing the front of the vehicle. BASIC FUNCTION 36 Settings SCREEN Phone P.83 SCROLL Sound SCROLL P.101 General SCROLL P.94 Radio P.102 BASIC FUNCTION 37 1 Quick Guide (DUAL 7.0-INCH DISPLAY SYSTEM) – Operation Flow: Setting the Clock Manually – Under normal conditions, when a Bluetooth phone is connected to the system, the clock will be adjusted automatically. If the clock is not adjusted automatically or a Bluetooth phone is not connected, it is necessary to adjust the clock manually. Display the clock settings screen. Select the manual mode. Adjust the clock. STEERING WHEEL CONTROLS 38 STEERING WHEEL CONTROLS STEERING WHEEL CONTROLS Press: Start the voice recognition system Press and hold: Start the Apple CarPlay/ Android Auto voice recognition function Some parts of the audio system can be controlled using the steering wheel controls. RADIO Press: Preset station/channel up/down Press and hold: Scan and stop at the first received station when the switch is released MEDIA Press: Change a track/file Press and hold: Fast forward/rewind Press: Volume up/down Press and hold: Volume up/down continuously Press: Receive a call Press: Turn on the audio system or change the audio source mode Press and hold: Turn off the audio system P.110 P.183 P.228 Press: End a call (during a call) or turn mute on/off (while in audio system mode) P.110,183 FUNCTION OVERVIEW 39 1 Quick Guide (11.6-INCH DISPLAY SYSTEM/11.6-INCH DISPLAY WITH NAVI SYSTEM) FUNCTION OVERVIEW FUNCTION OVERVIEW – 11.6-inch touch screen – (Map) button*1*2 Features: (Map) button*1*2 11.6-inch touch screen MAIN FUNCTIONS Pairing (Bluetooth 5.0) P.46 Navigation system*1 P.54 Apps P.60 Apple CarPlay P.129 Android Auto P.133 AM/FM radio P.56 HD Radio receiver P.155 SiriusXM® radio P.57 Media operation CD*3: P.165 USB: P.167 iPod/iPhone: P.169 Bluetooth audio: P.172 AUX: P.176 Phone P.50 Voice recognition system P.228 NFC P.46 Valet mode P.42 Steering wheel controls P.65 Rear view camera Car settings/informations Refer to the vehicle Owner’s Manual. Climate controls *1: If equipped *2: Displayed position may differ *3: If equipped with a CD player MAIN PRODUCT FEATURES 40 MAIN PRODUCT FEATURES Adoption of intuitive and easy-to-use smartphone-like graphical user interface Meter cluster linked display A large 11.6-inch touch screen display has been adopted. Information can be displayed seamlessly between this display and the display in the meter cluster. Function description display function Function descriptions or operation hints can be displayed when an icon displayed next to the name of a function. MAIN PRODUCT FEATURES 41 1 Quick Guide (11.6-INCH DISPLAY SYSTEM/11.6-INCH DISPLAY WITH NAVI SYSTEM) Expandable map screen* The map screen can be expanded to fill more of the display. Rough destination search function* Start a search with a variety of words such as addresses, facility names, intersection names, latitude/longitude, or “what3words”. Displays search prediction · Search results are predicted and candidates displayed even if only partial words are known · Searches can even be performed with multiple keywords. *: If equipped P.205 Customized home screen layout Frequently used functions and operations can be added to the home screen. Example: For calling specific phone numbers, listening to FM radio stations, etc. The position of screen buttons can be changed by selecting and holding it, then dragging it to the desired position. P.77 MAIN PRODUCT FEATURES 42 System and Bluetooth phone/device pairing Functions such as hands-free and applications can be used by connecting the system with Bluetooth phones/devices wirelessly. Apple CarPlay/Android Auto Apple CarPlay/Android Auto can be used wirelessly. P.46 Valet mode Valet mode restricts operations of the system when valet parking is used, to prevent unwanted access to personal information stored in the system. To enable/disable valet mode, enter a password preset by the user. Refer to the vehicle Owner’s Manual. P.129 P.133 BASIC FUNCTION 43 1 Quick Guide (11.6-INCH DISPLAY SYSTEM/11.6-INCH DISPLAY WITH NAVI SYSTEM) TOUCH SCREEN Operations are performed by touching the touch screen directly with your finger. Drag Pinch* *: If equipped Status display area Information display area Touch to display the operation screen of the selected category. Refer to the vehicle Owner’s Manual. BASIC FUNCTION OVERVIEW Turn the knob to adjust the volume. Press the knob to turn the volume mute on/off. Press and hold the knob to turn the audio system off. To turn the audio system on, press and hold the knob again or touch the screen to display and select it. Press and hold the knob for 10 seconds or longer to reset the system if the touch screen becomes unresponsive during operation or if any other system error occurs. Turn the knob to select a radio station or skip to the next or previous track/file. Press and hold the knob to display the sound customization screen. Display the home screen. Climate control display area Refer to the vehicle Owner’s Manual. Set a driver profile Display the manage devices screen. Display the vehicle settings screen. Refer to the vehicle Owner’s Manual. P.71 P.149 P.76 P.48,92 Turn the Auto Vehicle Hold system* on/off. Refer to the vehicle Owner’s Manual. P.46,47 *: If equipped BASIC FUNCTION 44 HOME SCREEN Radio SCREEN Apps SCREEN Settings SCREEN Media SCREEN Phone SCREEN Map SCREEN* P.50 P.54 P.60 P.63 P.56 P.58 Car information SCREEN P.49 While Apple CarPlay or Android Auto is being used, an Apple CarPlay or Android Auto icon will be displayed on the home screen. P.129,133 BASIC FUNCTION 45 1 Quick Guide (11.6-INCH DISPLAY SYSTEM/11.6-INCH DISPLAY WITH NAVI SYSTEM) Turn the display off. To turn the display on, press and hold the “ ” knob or touch the screen to display and select it. Valet Mode Add Shortcut Refer to the vehicle Owner’s Manual. Frequently used functions and operations can be added to the home screen. Button positions can be changed freely. P.77 P.78 Turn the Auto Vehicle Hold system* on/off. Refer to the vehicle Owner’s Manual. *: If equipped BASIC FUNCTION 46 PAIRING THE SYSTEM WITH A Bluetooth PHONE/DEVICE Display the manage devices screen. Prepare the Bluetooth phone/ device to be paired. Operate the Bluetooth phone/device. Follow instructions displayed to operate the Bluetooth phone/device. Register the Bluetooth phone/ device. If unable to pair, check whether your Bluetooth phone/device is compatible with the system. If a confirmation message appears asking whether to transfer the phone’s contact data to the system, select the appropriate button. When using an NFC compatible device, it is not necessary to perform the above procedure. Pairing can be performed by holding the device against the NFC logo of the audio system with the NFC setting on. BASIC FUNCTION 47 1 Quick Guide (11.6-INCH DISPLAY SYSTEM/11.6-INCH DISPLAY WITH NAVI SYSTEM) MANAGING A Bluetooth PHONE/DEVICE Display the manage devices screen. Select a device Select to enable/disable the function. Delete the device Add the device BASIC FUNCTION 48 Add a new profile. Registering a Bluetooth phone Enter a name. Procedure complete. CREATE A DRIVER PROFILE Select a language. BASIC FUNCTION 49 1 Quick Guide (11.6-INCH DISPLAY SYSTEM/11.6-INCH DISPLAY WITH NAVI SYSTEM) Displays the operating status of vehicle functions, vehicle status, and vehicle inclination. Refer to the vehicle Owner’s Manual. Setup and display vehicle part replacement intervals. Refer to the vehicle Owner’s Manual. Car information SCREEN BASIC FUNCTION 50 Phone SCREEN Directly input a number to place a call Call or send a text message* to a registered favorite Call or send a text message* to a recent contact Call or send a text message* to a contact in the phonebook on the Bluetooth connected phone Check or reply* to messages/place calls from received message list *: If available (for iOS only reception possible) P.114 P.113,122 P.112,122 P.114,122 P.121,122,123 BASIC FUNCTION 51 1 Quick Guide (11.6-INCH DISPLAY SYSTEM/11.6-INCH DISPLAY WITH NAVI SYSTEM) – Operation Flow: Receiving Calls and Using the Bluetooth Phone – Incoming call screen is displayed. In-call screen is displayed. Start three-way call End call Mute the connected smartphone’s voice Transfer call to Bluetooth phone Keypad Switch to call with other party In-call screen display and operation may differ, or may not be possible depending on the Bluetooth phone used. – Operation Flow: Placing Calls from the Phonebook – Select call recipient from phonebook. The notification setting on the Bluetooth phone may need to be activated in order to download the phonebook. If the phonebook download setting is off and a phonebook has not been downloaded, a message will be displayed and the phonebook of the connected Bluetooth phone can be downloaded. Select number for making call. Place call P.91 BASIC FUNCTION 52 – Operation Flow: Receiving a Message* – Incoming text screen is displayed. Message screen is displayed. Having messages read out Calling the message sender Replying to a message When there are unread messages in the message inbox *: If available (for iOS only reception possible) BASIC FUNCTION 53 1 Quick Guide (11.6-INCH DISPLAY SYSTEM/11.6-INCH DISPLAY WITH NAVI SYSTEM) – Operation Flow: Sending a Message* from the Phonebook – Select message. Send message. Select a contact from phonebook. The notification setting on the Bluetooth phone may need to be activated in order to download the phonebook. If the phonebook download setting is off and a phonebook has not been downloaded, a message will be displayed and the phonebook of the connected Bluetooth phone can be downloaded. Select the message icon next to the desired number. *: If available (for iOS only reception possible) P.91 BASIC FUNCTION 54 Map SCREEN* CURRENT POSITION MAP Current vehicle position (facing direction of travel) Menu button Zoom out Voice guidance enable/disable Zoom in Search by address, category, POI, etc. Current street Speed limit The orientation of the map can be changed between 2D north-up, 3D heading-up and 2D heading-up. 2D North-up screen Touch screen to display automatically hidden buttons. 3D Heading-up screen 2D Heading-up screen ROUTE GUIDANCE SCREEN Guidance display after next Guidance route Current position Distance to the next turn, an arrow indicating the turning direction and next street name Remaining distance and/ or remaining time Route guidance P.199 P.197 P.212 *: If equipped Estimated time of arrival BASIC FUNCTION 55 1 Quick Guide (11.6-INCH DISPLAY SYSTEM/11.6-INCH DISPLAY WITH NAVI SYSTEM) – Operation Flow: Route Guidance – Display the destination search menu. Destinations can also be set directly from the Map screen by selecting and holding at the desired position until is displayed. Search for your destination. Start a search by typing an address, category, POI, etc. Predicted search results will automatically appear as you type. Select your destination. Destinations matching the search words are displayed in a list. Start driving. Route guidance starts. The travel route is displayed, and voice guidance starts. The screen display automatically changes to display travel lanes at expressway junctions, etc. JUNCTION SCREEN RETURNING HOME If you register an address as Home, it can be quickly set as a destination. Register an address as Home Setting Home as the destination P.213 P.209 P.205 BASIC FUNCTION 56 Change radio mode Select to scan for receivable stations/ channels. Select to search for stations/channels by entering frequency/ channel number. Select to turn HD Radio mode on/off (AM/FM). Select to display a list of receivable stations (AM/FM). Preset stations/channels Select to change multicast channels available (FM). Radio SCREEN PAUSE AND PLAYBACK LIVE RADIO Depending on the radio broadcast, the broadcast can be temporarily saved and played back later. Skip backward Skip forward Pause/play P.157 BASIC FUNCTION 57 1 Quick Guide (11.6-INCH DISPLAY SYSTEM/11.6-INCH DISPLAY WITH NAVI SYSTEM) – Operation Flow: Presetting a Radio Station – Select the radio band and the radio station. A valid subscription to SiriusXM® Radio is required to receive satellite radio service. Select and hold one of the preset buttons. Mix preset function Multiple stations can be registered as presets. (AM, FM or SiriusXM® Radio) Register the radio station. ●● For you: Displays content suggestions based on the registered descriptions of driver profile and history of SiriusXM contents access. ●● Categories: Displays a channel list by category. ●● Related: Display a list of contents related to the current content you are listening to. USEFUL SiriusXM® Radio FUNCTIONS P.154,163 P.159 P.159 P.159 ●● Search: Enables search content by voice command or by using keypad/ keyboard. P.159 ●● Streaming contents: Contents can be accessed by log-in. P.104 BASIC FUNCTION 58 Media SCREEN Change media source Random playback on/off Change tracks Select and hold to fast rewind Change to other Bluetooth audio device/ register new device (Bluetooth audio) Change tracks Select and hold to fast forward Pause/play Playback tracks and programs, etc. in a variety of playback modes SUPPORTED MEDIA Audio CDs*1: Repeat all tracks → repeat current track → cancel repeat Media other than audio CDs: Repeat all tracks*2 → repeat current album/ folder → repeat current track → cancel repeat CD*1 USB/iPod/iPhone Bluetooth audio P.190 P.81 P.187 *1: If equipped with a CD player *2: Operable when USB Audio is used and Folders (Folders) is selected from (Browse) BASIC FUNCTION 59 1 Quick Guide (11.6-INCH DISPLAY SYSTEM/11.6-INCH DISPLAY WITH NAVI SYSTEM) – Operation Flow: Using Playback Modes – Display the playback mode list. Select the playback mode. Play a track. Depending on the audio source, several items from these categories are displayed in a list. Connecting a USB Memory Device / Portable Device Loading and Unloading a disc* *: If equipped with a CD player Loading a disc Unloading a disc Insert the disc with the label side facing the front of the vehicle. BASIC FUNCTION 60 Apps SCREEN Usable applications Apple CarPlay Apple CarPlay can be used to view Apple Maps, play music, and place calls by connecting an Apple CarPlay device to the system. Supported applications can also be run. To use the Apple CarPlay application, connect an Apple CarPlay device to the system wirelessly. For details on the services or the operations, check the Apple CarPlay site (https://www.apple.com/ios/carplay/). P.129 BASIC FUNCTION 61 1 Quick Guide (11.6-INCH DISPLAY SYSTEM/11.6-INCH DISPLAY WITH NAVI SYSTEM) Android Auto Android Auto can be used to view Google Maps, play music, and place calls by connecting an Android Auto device to the system. Supported applications can also be run. To use the Android Auto application, connect an Android Auto device to the system wirelessly. For details on the services or the operations, check the Android Auto site (https://www.android.com/auto/) and (https://support.google.com/androidauto/). MySubaru Access MySubaru from “SUBARU STARLINK Safety and Security” for a variety of remote services. Refer to the Owner’s Manual supplement for “SUBARU STARLINK Safety and Security” for details. P.133 BASIC FUNCTION 62 SiriusXM Travel Link is a service provided by SiriusXM® Radio, and can be used to view information on fuel prices, sports, stocks, weather, weather alerts and parking. To receive the data service information in the vehicle, a subscription to the SiriusXM® Radio Service is necessary following a free trial. SiriusXM Travel Link Fuel prices Weather Sports Weather alerts Stocks Parking P.161 P.137 BASIC FUNCTION 63 1 Quick Guide (11.6-INCH DISPLAY SYSTEM/11.6-INCH DISPLAY WITH NAVI SYSTEM) Settings SCREEN General SCROLL Car* SCROLL Sound SCROLL Phone P.83 P.94 P.101 Navigation SCROLL P.219 Radio P.102 *: For settings related to EyeSight, refer to the Owner’s Manual supplement for the EyeSight system. For all other functions and settings, refer to the vehicle Owner’s Manual. BASIC FUNCTION 64 – Operation Flow: Setting the Clock Manually – Under normal conditions, the clock is adjusted automatically when the system receives GPS signals*1/DCM (Data Communication Module) signals*2 or when a Bluetooth phone is connected to the system*3. If the clock is not adjusted automatically, it is necessary to adjust the clock manually. Display the clock settings screen. Select the manual mode. Adjust the clock. *1: 11.6-inch display with Navi system *2: 11.6-inch display system with SUBARU STARLINK Safety and Security *3: 11.6-inch display system without SUBARU STARLINK Safety and Security STEERING WHEEL CONTROLS 65 1 Quick Guide (11.6-INCH DISPLAY SYSTEM/11.6-INCH DISPLAY WITH NAVI SYSTEM) STEERING WHEEL CONTROLS STEERING WHEEL CONTROLS Press: Start the voice recognition system Press and hold: Start the Apple CarPlay/Android Auto voice recognition function When an Apple CarPlay/Android Auto is not used, the registration screen of a Bluetooth phone/device will be displayed. Some parts of the audio system can be controlled using the steering wheel controls. RADIO Press: Preset station/channel up/down Press and hold: Scan and stop at the first received station when the switch is released MEDIA Press: Change a track/file Press and hold: Fast forward/rewind Press: Volume up/down Press and hold: Volume up/down continuously Press: Receive a call Press: Turn on the audio system or change the audio source mode Press and hold: Turn off the audio system P.110 P.183 P.228 Press: End a call (during a call) or turn mute on/off (while in audio system mode) P.110,183 P.84 MEMO 66 Basic Function67 Basic Function Basic Information Before Operation 68 Initial Screen ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž68 Initial Screen ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž68 Loading And Unloading A Disc ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž69 Loading A Disc žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž69 Unloading A Disc žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž69 Connecting And Disconnecting A USB Memory Device/Portable Device ž ž ž ž ž ž ž ž ž ž ž70 Connecting A Device ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž70 Touch Screen Gestures ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž71 Touch Screen Operation ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž72 Entering Letters And Numbers/ List Screen Operation žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž73 Entering Letters And Numbers ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž73 List Screen Operation žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž75 Screen Adjustment žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž76 Adjusting Brightness žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž76 Changing Between Day And Night Mode žž ž ž ž ž ž ž ž ž76 Status Display žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž76 Home Screen Operation žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž77 Adding Shortcut Icons To The Home Screen žž ž ž ž ž ž77 Moving And Deleting Shortcut Icons žž ž ž ž ž ž ž ž ž ž ž ž ž ž78 BASIC INFORMATION BEFORE OPERATION INITIAL SCREEN INITIAL SCREEN WARNING llWhen the vehicle is stopped with the engine running, always apply the parking brake for safety. 1. When the ignition switch is turned to the “ACC” or “ON” position, the initial screen will be displayed and the system will begin operating. ●●After a few seconds, the “CAUTION” screen will be displayed. 2. Select I Agree (I Agree). BASIC INFORMATION BEFORE OPERATION 68 LOADING AND UNLOADING A DISC (IF EQUIPPED WITH A CD PLAYER) LOADING A DISC CAUTION llNever try to disassemble or oil any part of the CD player. Do not insert anything other than a disc into the slot. llIf coins or other foreign matter have been inserted into the disc slot, playback or ejection of a disc may be impossible. If a disc is removed forcibly, the disc or player may be damaged. If foreign matter has entered the player or a disc cannot be ejected, contact your SUBARU dealer. 1. Insert a disc into the disc slot. ●●After insertion, the disc is automatically loaded. NOTE llCompatible Disc: →P.187 llWhen inserting a disc, gently insert the disc with the label side facing the front of the vehicle. UNLOADING A DISC 1. Press and remove the disc. NOTE llDiscs can be unloaded even when the ignition switch is turned off. llIf the disc is not removed from the slot within 10 seconds of being ejected, it will automatically be pulled back into the slot. BASIC INFORMATION BEFORE OPERATION 69 Basic Function 2 CONNECTING AND DISCONNECTING A USB MEMORY DEVICE/PORTABLE DEVICE CONNECTING A DEVICE 1. Connect a device. XX11.6-inch display system/11.6-inch display with Navi system XXDual 7.0-inch display system ●● Turn on the power of the device if it is not turned on. NOTE llCompatible USB memory device: →P.190 llCompatible iPod/iPhone: →P.190 llThis unit does not support commercially available USB hubs. llBy connecting a device such as a cellular phone, charging starts depending on the device. BASIC INFORMATION BEFORE OPERATION 70 TOUCH SCREEN GESTURES Operations are performed by touching the touch screen directly with your finger. Operation method Outline Main use Touch Quickly touch and release once. Changing and selecting various settings Double Touch with one finger*1 Quickly touch and release twice with one finger. Enlarging the scale of the map screen Drag*2 Touch the screen with your finger, and move the screen to the desired position. • Scrolling the lists • Scrolling the map screen*1 Drag with two fingers*1 Touch the screen with two fingers and move the displayed screen as desired. Changing the displayed angle of the 3D map screen Operation method Outline Main use Swipe*2 Quickly move the screen by swiping with your finger. • Scrolling the lists • Scrolling the map screen*1 Pinch*1 Move your two fingers further apart (pinch-out) to zoom in the map. Move your two fingers closer together (pinchin) to zoom out the map. Changing the scale of the map screen *1: 11.6-inch display with Navi system only *2: The above operations may not be performed on all screens. NOTE llSwipe operations may not be performed smoothly in high altitudes. BASIC INFORMATION BEFORE OPERATION 71 Basic Function 2 TOUCH SCREEN OPERATION This system is operated mainly by the buttons on the screen. (Referred to as screen buttons in this manual.) ●●When a screen button is touched, a tone sounds. The tone sound can be adjusted. (→P.101) CAUTION llTo prevent damaging the screen, lightly touch the screen buttons with your finger. llDo not use objects other than your finger to touch the screen. llWipe off fingerprints using a glass cleaning cloth. Do not use chemical cleaners to clean the screen, as they may damage the touch screen. NOTE llIf the system does not respond to touching a screen button, move your finger away from the screen and then touch it again. llDimmed screen buttons cannot be operated. llThe displayed image may become darker and moving images may be slightly distorted when the screen is cold. llWhen it is extremely cold, screens may not be displayed properly and the data input by a user may be deleted. Also, the screen buttons may not operate correctly. NOTE llWhen is displayed on the screen, select to close a pop-up screen. llIf the touch screen is operated while wearing gloves, it may be unresponsive or may not function properly. BASIC INFORMATION BEFORE OPERATION 72 ENTERING LETTERS AND NUMBERS/ LIST SCREEN OPERATION ENTERING LETTERS AND NUMBERS When entering data, letters and numbers can be entered via the screen. XXType A Select to move the cursor. Input field • The position of the cursor can be moved by selecting the desired location in the input field. Select to clear the input field. Select to erase one character. Select to enter the item. Select to change keyboard types. Select to enter symbols. Select to enter characters in lower case or in upper case. BASIC INFORMATION BEFORE OPERATION 73 Basic Function 2 XXType B Input field • The position of the cursor can be moved by selecting the desired location in the input field. Select to clear the input field. Select to erase one character. Select to change keyboard types. Select to enter symbols. Select to enter characters in lower case or in upper case. • : Enables capital letter input of one character only. • : Enables capital letter input successively. NOTE llThe appearance of the keyboard may change or the input method may be limited depending on the circumstances where the software keyboard is displayed. BASIC INFORMATION BEFORE OPERATION 74 LIST SCREEN OPERATION The list screen can be scrolled by a swipe gesture. For details on the operation: →P. 71 XX11.6-inch display system/11.6-inch display with Navi system XXDual 7.0-inch display system Select to skip to the next or previous page. This indicates the displayed screen’s position. To scroll: Drag the position indicator. To jump: Touch the desired position of the rail. Some lists contain character screen buttons which allow users to jump directly to list entries that begin with the same letter as the character screen button. Every time the same character screen button is selected, the list starting with the subsequent character is displayed. BASIC INFORMATION BEFORE OPERATION 75 Basic Function 2 SCREEN ADJUSTMENT ADJUSTING BRIGHTNESS The brightness of the screen can be adjusted. Refer to the vehicle Owner’s Manual for details. CHANGING BETWEEN DAY AND NIGHT MODE (11.6-inch display with Navi system only) The screen mode of the map screen changes to day or night mode depending on the position of the headlight switch. The screen’s mode also changes to day or night mode depending on the position of the illumination brightness control dial, and surrounding brightness. STATUS DISPLAY The status of the Bluetooth connection, etc. is displayed on the screen. Display an outside temperature. Unit of measurements displayed can be changed. Refer to the vehicle Owner’s Manual. Display a current time. Select to display the clock setting screen. This icon is displayed when the audio system volume is mute. *1 This icon is displayed when a disc has been inserted. *2*3 Poor Excellent Display the level of Wi-Fi® reception. When Wi-Fi® function is off, no item is displayed. BASIC INFORMATION BEFORE OPERATION 76 *4*5 Poor Excellent Display the level of Wi-Fi® Hotspot reception. When Wi-Fi® Hotspot function is off, no item is displayed. This icon is displayed when the Bluetooth connection is established. Poor Excellent Display the level of phone reception. If a cellular phone is not connected via Bluetooth, this icon will not be displayed. The level of reception does not always correspond with the level displayed on the cellular phone. The level of reception may not be displayed depending on the phone you have. Low Full Display the remaining of Bluetooth device battery charge. The amount displayed does not always correspond with the amount displayed on the Bluetooth device. *1: If equipped with a CD player *2: This function is not available in some countries/areas. *3: 11.6-inch display with Navi system only *4: If equipped *5: Refer to the Owner’s Manual supplement for “SUBARU STARLINK Safety and Security” for details. HOME SCREEN OPERATION ADDING SHORTCUT ICONS TO THE HOME SCREEN Shortcut icons for various functions can be added to the home screen when the home screen shortcut function is turned on. (→P.94) 1. Display the home screen. (→P.19, 43) 2. Select (Add Shortcut). 3. Select the desired function. 4. Select the desired shortcut function. ●●Depending on the function, select other items and enter necessary information. 5. Check that the shortcut icon is displayed on the home screen. NOTE llWhen shortcuts are added, the home screen can be expanded to up to 3 pages (Dual 7.0-inch display system) or 4 pages (11.6-inch display system/11.6-inch display with Navi system). The page can be changed by swiping. BASIC INFORMATION BEFORE OPERATION 77 Basic Function 2 MOVING AND DELETING SHORTCUT ICONS Users can rearrange the home screen buttons when the home screen shortcut function is turned on. (→P.94) 1. Select and hold the shortcut icon to enter edit mode. XXWhen moving shortcut icons 2. Drag the button to the desired position. ●●User can move buttons to another page by dragging them to the corresponding end of the screen if the number of buttons allows for multiple pages. XXWhen deleting shortcut icons 2. Drag the button to “DRAG HERE TO DELETE” area. 3. Press (Dual 7.0-inch display system) or select (11.6-inch display system/11.6-inch display with Navi system) to leave the edit mode. BASIC INFORMATION BEFORE OPERATION 78 79 Settings Settings Bluetooth® Settings 80 Registering A Bluetooth Phone/ Device For The First Time ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž80 Profiles žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž81 Bluetooth Settings žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž83 Phone Settings Screen žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž83 Registering A Bluetooth Phone/Device ž ž ž ž ž ž ž ž ž ž ž ž84 Connecting Or Disconnecting Bluetooth Phone/Device ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž87 Deleting Bluetooth Phones/Devices žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž90 Setting Phonebook/Recent Calls Download žž ž ž ž ž ž91 Other Settings 92 Setting Driver Profiles žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž92 Registering A Driver Profile ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž92 Recalling A Driver Profile ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž93 Editing A Driver Profile žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž94 Deleting A Driver Profile žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž94 General Settings žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž94 General Settings Screen žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž94 Setting Wi-Fi® Connection žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž96 Updating The System žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž99 Sound Settings žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 101 Sound Settings Screen žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 101 Radio Settings žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 102 Setting AM/FM Radio žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 102 Setting The SiriusXM® Radio ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 104 Bluetooth® SETTINGS REGISTERING A Bluetooth PHONE/ DEVICE FOR THE FIRST TIME To use the hands-free system or the Bluetooth audio system, it is necessary to register a Bluetooth phone/device with the system. Once the Bluetooth phone/device has been registered, it is possible to use the hands-free system and the Bluetooth audio system. This operation cannot be performed while driving. For details on registering a Bluetooth phone/device: →P.84 XX11.6-inch display system/11.6-inch display with Navi system 1. Turn the Bluetooth connection setting of your Bluetooth phone/device on. ●● This function is not available when the Bluetooth connection setting of your Bluetooth phone/device is set to off. 2. Select . 3. Follow the STEPS 2 to 6 in “REGISTERING A Bluetooth PHONE/DEVICE”. (→P.84) XXDual 7.0-inch display system 1. Turn the Bluetooth connection setting of your Bluetooth phone/device on. ●● This function is not available when the Bluetooth connection setting of your Bluetooth phone/device is set to off. 2. Display the phone screen. (→P.108) 3. Select Yes (Yes) to register a Bluetooth phone/device. 4. Follow the STEPS 4 to 7 in “REGISTERING A Bluetooth PHONE/DEVICE”. (→P.84) Bluetooth® SETTINGS 80 PROFILES This system supports the following services. Bluetooth Device Spec. Function Requirements Recommendations Bluetooth Phone/Device Bluetooth Specification Registering a Bluetooth phone/device Ver. 2.1 Ver. 5.0*1 Ver. 4.2*2 Bluetooth Device Profile Function Requirements Recommendations Bluetooth Phone HFP (Hands-Free Profile) Hands-free system Ver. 1.0 Ver. 1.8*1 Ver. 1.7*2 PBAP (Phone Book Access Profile) Transferring the contacts Ver. 1.0 Ver. 1.2.3*1 Ver. 1.2*2 MAP (Message Access Profile) Bluetooth phone message – Ver. 1.4.2*1 Ver. 1.3*2 SPP (Serial Port Profile) APPS function – Ver. 1.2 Bluetooth Device A2DP (Advanced Audio Distribution Profile) Bluetooth audio system Ver. 1.0 Ver. 1.3.2*1 Ver. 1.3*2 AVRCP (Audio/Video Remote Control Profile) Ver. 1.0 Ver. 1.6.2*1 Ver. 1.6*2 *1: 11.6-inch display system/11.6-inch display with Navi system *2: Dual 7.0-inch display system Settings Bluetooth® SETTINGS 81 Settings 3 NOTE llIf your cellular phone does not support HFP, registering the Bluetooth phone or using PBAP, MAP or SPP profiles individually will not be possible. llIf the connected Bluetooth phone/device version is older than recommended or incompatible, the Bluetooth phone/device function may not work properly. llIf the application is not running smoothly or is unstable, disconnect and reconnect the Bluetooth phone/device via Bluetooth (→P.87) and/or USB cable (→P.70). If the problem continues, reboot the Bluetooth phone/device. Bluetooth® SETTINGS 82 Bluetooth SETTINGS 1. Display the home screen. (→P.19, 43) 2. Select Settings (Settings). 3. → Phone (Phone) 4. Select the items to be set. PHONE SETTINGS SCREEN Registering a Bluetooth phone/device: →P.84 Connecting or disconnecting Bluetooth phones/devices: →P.87 Deleting Bluetooth phones/devices: →P.90 Setting phonebook/recent calls download: →P.91 Sorting the recent calls list and contacts list: →P.113 Deleting all favorites list: →P.114 Setting the message: →P.120 Changing the device name *1 Setting Apple CarPlay: →P.132 Displays current Wi-Fi® password.*2 Generate (Generate): Generates a new password. Setting Android Auto*1: →P.136 *1: Dual 7.0-inch display system only *2: 11.6-inch display system/11.6-inch display with Navi system only NOTE ll“Manage Devices” screen can also be displayed by selecting Manage Devices (Manage Devices) or (Add Device) on the phone screen (→P.108) or Bluetooth audio control screen (→P.173) or (11.6-inch display system/11.6-inch display with Navi system only). Settings Bluetooth® SETTINGS 83 Settings 3 REGISTERING A Bluetooth PHONE/DEVICE Up to 7 (11.6-inch display system/11.6-inch display with Navi system) or 5 (Dual 7.0-inch display system) Bluetooth phones/ devices can be registered. Bluetooth compatible phones (HFP) and devices (AVP) can be registered simultaneously. This operation cannot be performed while driving. XX11.6-inch display system/11.6-inch display with Navi system 1. Select . 2. Select (Add). ●● If a message appears, follow the guidance on the screen. 3. Follow instructions displayed to operate the Bluetooth phone/device. ●● / : Select to scroll the instructions. ●● Cancel (Cancel): Select to cancel the registration. ●● For details on operating the Bluetooth phone/device, see the manual that comes with it. Bluetooth® SETTINGS 84 4. Register using your Bluetooth phone/device. ●●A PIN-code is not required for SSP (Secure Simple Pairing) compatible Bluetooth phones/devices. Depending on the type of Bluetooth phone/device being connected, a message confirming registration may be displayed on the Bluetooth phone’s/device’s screen. Respond and operate the Bluetooth phone/device according to the confirmation message. NOTE llTo re-register your Bluetooth phone/device after having deleted it from the system, operate the Bluetooth phone/device and register it after deleting the previously registered system information from the Bluetooth phone/device. 5. Check that the following pop-up screen may be displayed. ●● Cancel (Cancel): Select to cancel the registration. ●● If a confirmation message appears asking whether to transfer the phone’s contact data to the system, select the appropriate button. 6. When the connection is completed, confirm that a connected device name is displayed. ●● If an error message appears, follow the guidance on the screen to try again. NOTE llWhen registering an NFC compatible device, registration is performed when the Bluetooth phone/device is held against the NFC logo of the audio system until a connection is established. XXDual 7.0-inch display system 1. Display the phone settings screen. (→P.83) 2. Select Manage Devices (Manage Devices). 3. → (Add) ●● If a message appears, follow the guidance on the screen. Settings Bluetooth® SETTINGS 85 Settings 3 4. Follow instructions displayed to operate the Bluetooth phone/device. ●● / : Select to scroll the instructions. ●● Cancel (Cancel): Select to cancel the registration. ●● For details on operating the Bluetooth phone/device, see the manual that comes with it. 5. Register using your Bluetooth phone/device. ●●A PIN-code is not required for SSP (Secure Simple Pairing) compatible Bluetooth phones/devices. Depending on the type of Bluetooth phone/device being connected, a message confirming registration may be displayed on the Bluetooth phone’s/device’s screen. Respond and operate the Bluetooth phone/device according to the confirmation message. NOTE llTo re-register your Bluetooth phone/device after having deleted it from the system, operate the Bluetooth phone/device and register it after deleting the previously registered system information from the Bluetooth phone/device. 6. Check that the following pop-up screen may be displayed. ●● Cancel (Cancel): Select to cancel the registration. ●● If a confirmation message appears asking whether to transfer the phone’s contact data to the system, select the appropriate button. 7. When the connection is completed, confirm that a connected device name is displayed. ●● If an error message appears, follow the guidance on the screen to try again. Bluetooth® SETTINGS 86 CONNECTING OR DISCONNECTING Bluetooth PHONE/DEVICE XX11.6-inch display system/11.6-inch display with Navi system Up to 7 Bluetooth phones/devices (Phones (HFP) and devices (AVP)) can be registered. If more than 1 Bluetooth phone/device has been registered, select which Bluetooth phone/device to connect to. 1. Select . 2. Select the Bluetooth phone/device to be connected or disconnected. ●● Selecting besides the name of the desired Bluetooth phone/device changes the icon to (yellow). The selected Bluetooth phone/device will be registered as a favorite and moved to the top of the list. When the ignition switch is turned to the “ACC” or “ON” position, the favorite-registered device will be connected automatically. (→P.89) ●●Bluetooth phone/device currently being connected is displayed in blue frame. Enabled functions are displayed besides the characters. ●● If the desired Bluetooth phone/device is not on the list, select (Add) to register the Bluetooth phone/ device. (→P.84) 3. To connect/disconnect the Bluetooth phone/device, select “Connect” at the top or select “Bluetooth” of “Connection Preference” at the bottom. ●●By using “Connection Preference”, function connected when the Bluetooth phone/device is connected can be selected. Settings Bluetooth® SETTINGS 87 Settings 3 ●● If an error message appears, follow the guidance on the screen to try again. Select to connect/disconnect Bluetooth. * Select to connect/disconnect Apple CarPlay. Select to connect/disconnect Android Auto. *: Displayed when a compatible device is operated and the function is enabled. NOTE llIt may take time if the Bluetooth phone/device connection is carried out during Bluetooth audio playback. llDepending on the type of Bluetooth phone/device being connected, it may be necessary to perform additional steps on the Bluetooth phone/device. XXDual 7.0-inch display system Up to 5 Bluetooth phones/devices (Phones (HFP) and devices (AVP)) can be registered. If more than 1 Bluetooth phone/device has been registered, select which Bluetooth phone/device to connect to. 1. Display the phone settings screen. (→P.83) 2. Select Manage Devices (Manage Devices). 3. Select the Bluetooth phone/device to be connected or disconnected. ●● To disconnect the Bluetooth phone/device, select Yes (Yes). ●● “Connected” is displayed next to the currently connected Bluetooth phone/device. Bluetooth® SETTINGS 88 ●● Selecting besides the name of the desired Bluetooth phone/device changes the icon to (yellow). The selected device will be moved to the top of the list. ●● If the desired Bluetooth phone/device is not on the list, select (Add) to register the Bluetooth phone/ device. (→P.84) 4. Check that “Connected” is displayed next to the Bluetooth phone/device when the connection is complete. ●● If an error message appears, follow the guidance on the screen to try again. NOTE llIt may take time if the Bluetooth phone/device connection is carried out during Bluetooth audio playback. llDepending on the type of Bluetooth phone/device being connected, it may be necessary to perform additional steps on the Bluetooth phone/device. AUTO CONNECTION MODE Leave the Bluetooth phone/device in a location where the connection can be established. ●●When the ignition switch is turned to the “ACC” or “ON” position, the system searches for a nearby registered Bluetooth phone/device. ●● If a nearby registered Bluetooth phone/device is registered to favorite, the device will be connected automatically. (→P.87) If there are no devices registered to favorite, the system will connect with the registered Bluetooth phone/device that was last connected, if it is nearby. CONNECTING MANUALLY When the auto connection has failed, it is necessary to connect Bluetooth phones/devices manually. Follow the “CONNECTING OR DISCONNECTING Bluetooth PHONE/DEVICE”. (→P.87) Bluetooth® SETTINGS 89 Settings 3 RECONNECTING THE Bluetooth PHONE/DEVICE If a Bluetooth phone/device is disconnected due to poor reception from the Bluetooth network when the ignition switch is turned to the “ACC” or “ON” position, the system automatically reconnects the Bluetooth phone/device. ●● If a Bluetooth phone/device is disconnected on purpose, such as turning it off, this does not happen. Reconnect the Bluetooth phone/device manually. NOTE llWhen a Bluetooth phone/device is registered to the profile of a driver, a message may be displayed asking if the change of profile to the driver is desired. (→P.93) DELETING Bluetooth PHONES/DEVICES XX11.6-inch display system/11.6-inch display with Navi system 1. Select . 2. Select Delete (Delete). 3. Select for the Bluetooth phone/device you wish to delete. 4. Select OK (OK) when the confirmation message appears. NOTE llThe Bluetooth phone/device will still contain information from this system even after the Bluetooth phone/device has been deleted. Operate the Bluetooth phone/device to delete the system information saved inside the Bluetooth phone/device. XXDual 7.0-inch display system 1. Display the phone settings screen. (→P.83) 2. Select Manage Devices (Manage Devices). 3. → Delete (Delete) 4. Select for the Bluetooth phone/device you wish to delete. 5. Select OK (OK) when the confirmation message appears. NOTE llThe Bluetooth phone/device will still contain information from this system even after the Bluetooth phone/device has been deleted. Operate the Bluetooth phone/device to delete the system information saved inside the Bluetooth phone/device. Bluetooth® SETTINGS 90 SETTING PHONEBOOK/RECENT CALLS DOWNLOAD When this function is activated, the phonebook data of the connected Bluetooth phone will be downloaded automatically. 1. Display the phone settings screen. (→P.83) 2. Select Phonebook/Recent Calls (Phonebook/Recent Calls). 3. Select to turn “Automatically Download Phonebook/Recent Calls” on/off. NOTE llThe profile version of the connected Bluetooth phone may not be compatible with downloading phonebook data. For details, contact your SUBARU dealer. llUp to 2000 contacts in the phonebook of the connected Bluetooth phone can be downloaded. Up to 5 phone numbers registered to a contact can be downloaded. llThe notification setting on the Bluetooth phone may need to be activated in order to download the phonebook. For details, check the instructions for the connected Bluetooth phone. When the system’s clock settings are set to auto, the auto-adjustment function and message function (→P.119) will not function properly if the phonebook is not downloaded. llThe Bluetooth phone’s favorite list will not be downloaded automatically even after the phonebook data has been downloaded from the Bluetooth phone. This system does not currently support transfer of data from the Bluetooth phone favorites list. To add the Bluetooth phone’s favorites list to the system’s favorites list, you need to register it through the system phonebook contacts list. (→P.114) Bluetooth® SETTINGS 91 Settings 3 OTHER SETTINGS SETTING DRIVER PROFILES Once a driver profile is registered, some of the contents customized by the driver, such as navigation, radio, and sound settings, etc., will be categorized and memorized for that driver. When the vehicle is shared by multiple drivers, such as by family members, some settings altered by other drivers will be overwritten by recalling a registered driver profile. Additionally, a driver profile, if linked to a Bluetooth phone/ device, can be recalled automatically when the Bluetooth phone/device is connected. NOTE llSome of the memorized contents will be shared, not categorized by driver. Even though your driver profile is recalled, some settings changed by another driver may remain. REGISTERING A DRIVER PROFILE Profiles of up to 4 drivers can be registered. 1. Select (11.6-inch display system/11.6-inch display with Navi system)/ (Dual 7.0-inch display system). 2. Select (Add). 3. Select a desired language and select NEXT (NEXT). 4. → Driver’s Name (Driver’s Name) 5. Enter a driver name and select Next (Next). 6. Check driver name displayed and select NEXT (NEXT). 7. → (Add Phone) XX11.6-inch display system/11.6-inch display with Navi system OTHER SETTINGS 92 XXDual 7.0-inch display system ●●By following the STEPS 3 to 6 (11.6-inch display system/11.6-inch display with Navi system)/STEPS 4 to 7 (Dual 7.0-inch display system) in “REGISTERING A Bluetooth PHONE/DEVICE”, register a Bluetooth phone/ device. (→P.84) ●● Finish (Finish): Exits without registering a Bluetooth phone/device. ●●When registering a Bluetooth phone/device already registered to the system, select it from the displayed listing. 8. Select the registered Bluetooth phone/device then Finish (Finish). 9. Check the registered driver name is displayed. NOTE llThe profile of a driver with a Bluetooth phone/device registered can be recalled automatically when connected. (→P.93) RECALLING A DRIVER PROFILE RECALLING A DRIVER PROFILE AUTOMATICALLY When a Bluetooth phone/device, registered to the profile of a driver, is connected, a message will be displayed asking if the change of profile to the driver is desired. To change to the profile of that driver, select OK (OK). NOTE llEven though a Bluetooth phone/device registered to a driver profile is in the vehicle, the driver profile will not be recalled automatically when another Bluetooth phone/device is connected. Manually change profile if desired. llWhen there are more than one Bluetooth phone/device in the vehicle that can be connected, a message may be displayed asking if the change of profile to the suggested driver is desired. If the suggested change is not desired, select Cancel (Cancel) then change manually to the desired driver profile. RECALLING A DRIVER PROFILE MANUALLY 1. Select (11.6-inch display system/11.6-inch display with Navi system)/ (Dual 7.0-inch display system). 2. Select the desired driver name then OK (OK). NOTE llWhen a driver profile is recalled manually, the Bluetooth phone/ device of the driver will not be connected automatically. OTHER SETTINGS 93 Settings 3 EDITING A DRIVER PROFILE 1. Select (11.6-inch display system/11.6-inch display with Navi system)/ (Dual 7.0-inch display system). 2. Select Edit (Edit). 3. Select a desired driver profile name to edit. 4. Follow the STEPS 3 to 8 in “REGISTERING A DRIVER PROFILE”. (→P.92) DELETING A DRIVER PROFILE 1. Select (11.6-inch display system/11.6-inch display with Navi system)/ (Dual 7.0-inch display system). 2. Select Edit (Edit). 3. Select for the driver profile name you wish to delete. 4. → OK (OK) GENERAL SETTINGS 1. Display the home screen. (→P.19, 43) 2. Select Settings (Settings). 3. → General (General) 4. Select the items to be set. GENERAL SETTINGS SCREEN For details about the following menu, refer to the vehicle Owner’s Manual. ●● Clock (Clock) ●● Display (Display) ●● Reminder Screen (Reminder Screen) ●● Valet Mode (Valet Mode) ●● Meter Screen (Meter Screen) ●● Camera (Camera) ●● Climate Control (Climate Control) ●● Temperature Units (Temperature Units) ●● Language (Language) ●● Tire Pressure Units (Tire Pressure Units) ●● Welcome Screen (Welcome Screen) ●● Goodbye Screen (Goodbye Screen) ●● Favorite Widgets (Favorite Widgets) OTHER SETTINGS 94 ●● Birthday List (Birthday List) ●● Anniversary List (Anniversary List) (Wi-Fi Settings)*1*2 Select to set the Wi-Fi® function settings. (→P.96) Wi-Fi Security Information (Wi-Fi Security Information)*3*4 Select to display Wi-Fi® security type that Wireless Apple CarPlay or Wireless Android Auto uses. Wi-Fi Hotspot (Wi-Fi Hotspot)*5*6 Select to set the Wi-Fi® Hotspot settings. Home Screen Shortcuts (Home Screen Shortcuts) Select to turn the home screen shortcuts function on/off. (→P.77) Periodic Rest Notification (Periodic Rest Notification)*2 Select to turn the display for the periodic rest notification pop-up screen on/off. (→P.202) Software Update (Software Update)*1*6 The system software can be updated via DCM (Data Communication Module). (→P.99) Factory Data Reset (Factory Data Reset) Select to reset all setup items. The audio system restarts automatically after resetting factory data. To complete the reset process, turn the ignition switch to the “LOCK”/“OFF” position after the audio system has restarted, and then turn to the “ACC” or “ON” position after approximately 3 minutes. System Information (System Information) Select to display the system information. Free/Open Source Software Information (Free/Open Source Software Information) Select to display the free/open source software information. OTHER SETTINGS 95 Settings 3 *1: This function is not available in some countries/areas. *2: 11.6-inch display with Navi system only *3: 11.6-inch display system/11.6-inch display with Navi system only *4: Displayed when Wireless Apple CarPlay/Wireless Android Auto is used. *5: If equipped *6: Refer to the Owner’s Manual supplement for “SUBARU STARLINK Safety and Security” for details. SETTING Wi-Fi® CONNECTION (11.6-inch display with Navi system only)* *: This function is not available in some countries/areas. CONNECTING TO A Wi-Fi® NETWORK 1. Display the general settings screen. (→P.94) 2. Select (Wi-Fi Settings). 3. → Available Wi-Fi Networks (Available Wi-Fi Networks) 4. Select the desired network. ●●When a network with is selected and the password entry screen is displayed, enter the password, and then select OK (OK). OTHER SETTINGS 96 SETTING UP A CONNECTION QUICKLY If a Wi-Fi® device is Wi-Fi® Protected Setup compatible, it can be connected to more quickly. 1. Display the general settings screen. (→P.94) 2. Select (Wi-Fi Settings). 3. → Wi-Fi Protected Setup (Wi-Fi Protected Setup) 4. Select PIN Setup (PIN Setup) or Push Button Setup (Push Button Setup) as determined by the device. 5. Operate the Wi-Fi® device to connect. ●●When PIN Setup (PIN Setup) is selected: Enter the displayed PIN code into the Wi-Fi® network device. ●●When Push Button Setup (Push Button Setup) is selected: Push the WPS button on the Wi-Fi® network device. ADDING A Wi-Fi® NETWORK Available networks which are not displayed by searching can be added. 1. Display the general settings screen. (→P.94) 2. Select (Wi-Fi Settings). 3. → Available Wi-Fi Networks (Available Wi-Fi Networks) 4. → (Add) 5. → Wi-Fi Name (SSID) (Wi-Fi Name (SSID)) 6. Enter the network name. → OK (OK) 7. → Security (Security) 8. Select the security type. 9. → Start Connection (Start Connection) ●●When a password is required, enter the password. → OK (OK) OTHER SETTINGS 97 Settings 3 DELETING A Wi-Fi® NETWORK 1. Display the general settings screen. (→P.94) 2. Select (Wi-Fi Settings). 3. Select Wi-Fi (Wi-Fi) to turn the Wi-Fi® function off. 4. → Registered Wi-Fi Networks (Registered Wi-Fi Networks) 5. → Delete (Delete) 6. Select for the Wi-Fi® network you wish to delete. → OK (OK) WARNING llUse Wi-Fi® devices only when safe and legal to do so. llThis system is fitted with Wi-Fi® antennas. People with implantable cardiac pacemakers, cardiac resynchronization therapypacemakers or implantable cardioverter defibrillators should maintain a reasonable distance between themselves and the Wi-Fi® antennas. The radio waves may affect the operation of such devices. llBefore using Wi-Fi® devices, users of any electrical medical device other than implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverter defibrillators should consult the manufacturer of the device for information about its operation under the influence of radio waves. Radio waves could have unexpected effects on the operation of such medical devices. OTHER SETTINGS 98 SUPPORTED Wi-Fi® NETWORK SPECIFICATIONS The system can connect to a Wi-Fi® network that supports the following standards. ●●Communication standards: • IEEE802.11a • IEEE802.11b • IEEE802.11g • IEEE802.11n • IEEE802.11ac ●● Security: • WPATM • WPA2TM • WPA3TM NOTE llWPA, WPA2 and WPA3 are registered mark of the Wi-Fi Alliance®. llAs the frequency band used for Wi-Fi® differs by country or region, it may not be possible to use 5GHz band. UPDATING THE SYSTEM* *: This function is not available in some countries/areas. Please ask your dealer to update the system software*1. 11.6-inch display system/11.6-inch display with Navi system equipped with DCM (Data Communication Module) only: You may also update the system software via DCM (Data Communication Module). The update process involves downloading and installing a software update*2. Note that system functionality will be restricted during installation. *1: Please check with your dealer for specific details on the update content. *2: Depending on the software update content, your radio station presets and volume settings may be reset by the update process. NOTE llUpdate using DCM (Data Communication Module) may not be available in some countries. OTHER SETTINGS 99 Settings 3 DOWNLOAD UPDATE Updated software will be downloaded automatically. When download is completed, a message asking if installation is desired or not will be displayed. (→P.100) UPDATE INSTALLATION CAUTION llPark your vehicle in a safe place when installing the update. llThe following system functions are restricted during the update installation. • It will not be possible to use general system functions. • Only the rear view camera image will be displayed. Or the image will disappear temporarily. 1. When a message asking if installation is desired or not is displayed, select Yes (Yes). ●● Installation will take several minutes. ●● Remind Me Later (Remind Me Later): Select to extend the installation timing by up to twice. NOTE llDuring software update installation, the screen may flicker. However, this is not a malfunction. 2. When installation is complete, select OK (OK) on the confirmation message. ●● If the update procedure fails, refer to the “TROUBLESHOOTING” section. (→P.251) 3. Turn the ignition switch to the “LOCK”/“OFF” position and exit the vehicle. 4. Close the driver’s door and lock the doors, then move at least 10 feet (3 m) away from the vehicle to prevent the key from interfering. 5. After at least 5 minutes have elapsed, start the engine again. ●● The new software will be applied. OTHER SETTINGS 100 SOUND SETTINGS 1. Display the home screen. (→P.19, 43) 2. Select Settings (Settings). 3. → Sound (Sound) 4. Select the items to be set. SOUND SETTINGS SCREEN Sound Customization (Sound Customization): Select to display the sound customization screen. (→P.149) Sound Restorer (Sound Restorer)*1: Select to turn the sound restorer function on/off. This function plays compressed audio with quality near original sound by adding the complement signal of high tone. Virtual Bass (Virtual Bass)*1: Select to set the virtual bass function. This function corrects the bass sound by adding harmonic sound. Dynamic Beat Enhancer (Dynamic Beat Enhancer)*1: Select to set the dynamic beat enhancer function. This function expands the dynamic range lost in data compression and creates a sharp beat sound. Speed Volume Control (Speed Volume Control)*1: Select to set the speed volume. The system adjusts to the optimum volume and tone quality according to vehicle speed to compensate for increased vehicle noise. AUX Volume Gain (AUX Volume Gain): Select to set AUX volume gain. *2 Select to set the navigation prompt volume. *3 Select to adjust the interrupt guidance volume. Select to turn the tone sound on/off. OTHER SETTINGS 101 Settings 3 Select to adjust the tone sound volume. Select to adjust the ringtone volume. Select to adjust the volume of a received call. Select to adjust the call volume. Select to adjust the SMS/MMS ringtone volume. Select to adjust the SMS/MMS read out volume. Select to set the voice recognition prompts volume. Select to enable/disable memorizing the volume level of the audio source. When enabled and when the ignition switch is turned from “LOCK”/“OFF” to “ACC” or “ON”, the volume level of the audio source last used will be recalled. *1: This setting can be made depending on the connected amplifier type. *2: 11.6-inch display with Navi system only *3: 11.6-inch display system/Dual 7.0-inch display system only RADIO SETTINGS 1. Display the home screen. (→P.19, 43) 2. Select Settings (Settings). 3. → Radio (Radio) SETTING AM/FM RADIO 1. Display the radio settings screen. (→P.102) 2. Select AM (AM) or FM (FM). 3. Select the desired item to be set. Select to turn the HD Radio mode on/off. Select to display the saved bookmark list. (→P.103) * Select to set seek sensitivity of AM band as DX (Distance) (DX (Distance)) or LO (Local) (LO (Local)). *: AM radio only OTHER SETTINGS 102 DISPLAYING THE BOOKMARK DETAILS Cover art/track title/artist/album name are displayed for bookmarked tracks. A QR code containing the track title/artist/album name can be displayed. 1. Display the AM settings screen or FM settings screen. (→P.102) 2. Select Saved Bookmarks (Saved Bookmarks). 3. Select the desired bookmark. DELETING THE BOOKMARK 1. Display the AM settings screen or FM settings screen. (→P.102) 2. Select Saved Bookmarks (Saved Bookmarks). 3. → Edit (Edit) 4. Select for the bookmark you wish to delete. → OK (OK) ●●Deleting the bookmark can also be deleted select to from the bookmark details screen. OTHER SETTINGS 103 Settings 3 SETTING THE SiriusXM® Radio 1. Display the radio settings screen. (→P.102) 2. Select SiriusXM (SiriusXM). 3. Select the desired item to be set. XX11.6-inch display system/11.6-inch display with Navi system Subscribe (Subscribe): Select to enter into a contract for the package plan of the SiriusXM® with 360L. Manage Account (Manage Account): Select to manage/switch SiriusXM® with 360L accounts. Log In/Set Up (Log In/Set Up): Select to select setting for listening of SiriusXM® with 360L/ log in. When logged in, select the touch button with the listener name on it to edit listener name, avatar, etc. Select to register desired channels to favorite or display/edit registered favorites. • Select Add Current (Add Current) to register the current channel as a favorite. • Select a registered channel to display the screen for listening. Select to select a channel from listening history of SiriusXM® Radio. Select to set the Listener Settings. (→P.105) Select to display the phone number of SiriusXM® customer care and your radio ID. (Call): Select to make a call when a Bluetoothcompatible phone is connected. Select to enable/disable the Location Service. Select to display descriptions regarding Do Not Sell My Info. OTHER SETTINGS 104 XXDual 7.0-inch display system Select to select a channel from listening history of SiriusXM® Radio. Select to set the Listener Settings. (→P.105) Select to display the phone number of SiriusXM® customer care and your radio ID. (Call): Select to make a call when a Bluetoothcompatible phone is connected. Select to display the subscription status of SiriusXM®, phone number of SiriusXM® customer care, and your radio ID. (Call): Select to make a call when a Bluetoothcompatible phone is connected. Select to display the privacy policy of SiriusXM®. SETTING THE LISTENER SETTINGS 1. Display the SiriusXM settings screen. (→P.104) 2. Select Listener Settings (Listener Settings). When this function is on, channels registered as Smart Favorites will be cached, and when the channel is changed, the song on that channel can be listened to from the beginning. Select to enable/disable notification of registered sports teams or music artists/tunes, such as their game match starting time or tune to be played. Registered teams, artists, and tunes for notification can be edited. Select to delete all the listening history. Select to enable/disable parental control and to set passcode of the parental control screen. (→P.106) OTHER SETTINGS 105 Settings 3 SETTING THE PARENTAL CONTROL PASSCODE 1. Display the Listener Settings screen. (→P.105) 2. Select Parental Control (Parental Control). 3. Select OK (OK) when the confirmation message appears. 4. Enter the 4 digits passcode. → OK (OK) ENABLING/DISABLING PARENTAL CONTROL 1. Display the Listener Settings screen. (→P.105) 2. Select Parental Control (Parental Control). 3. Enter the 4 digits passcode. → OK (OK) 4. Select to turn the “Block Explicit” on/off. CHANGING THE PARENTAL CONTROL PASSCODE 1. Display the Listener Settings screen. (→P.105) 2. Select Parental Control (Parental Control). 3. Enter the 4 digits passcode. → OK (OK) 4. → Change Passcode (Change Passcode) 5. Enter the 4 digits current passcode. → OK (OK) 6. Enter the 4 digits new passcode. → OK (OK) OTHER SETTINGS 106 107 Phone Phone Phone Operation 108 Phone Screen žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 108 Some Basics žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 109 Registering/Connecting A Bluetooth Phone ž ž ž ž 110 Using The Phone Switch/Microphone žž ž ž ž ž ž ž ž ž ž ž 110 Voice Recognition System žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 111 About The Contacts In The Contact List žž ž ž ž ž ž ž ž ž 111 Calling On The Bluetooth Phone ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 112 By Recent Calls List žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 112 By Favorites List žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 113 By Keypad ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 114 By Contacts List žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 114 Receiving On The Bluetooth Phone žž ž ž ž ž ž ž ž ž ž ž ž ž ž 115 Incoming Calls žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 115 Talking On The Bluetooth Phone žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 116 Call Waiting žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 117 Bluetooth Phone Message Function žž ž ž ž ž ž ž ž ž ž ž ž ž 119 Setting The Message žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 120 Receiving A Message ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 120 Checking Messages žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 121 Replying To A Message (Quick Reply) žž ž ž ž ž ž ž ž ž ž ž ž 122 Sending A New Short Message žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 122 Editing The Quick Reply Message žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 122 Deleting The Quick Reply Message ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 123 Adding The Quick Reply Message žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 123 Calling The Message Sender žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 123 PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) PHONE SCREEN The phone screen can be accessed with the following methods: ●●Display the home screen (→P.19, 43), and then select Phone (Phone). ●●Press the switch on the steering wheel. ●●Dual 7.0-inch display system only: Press . XX11.6-inch display system/11.6-inch display with Navi system XXDual 7.0-inch display system Phone operation Registering a Bluetooth phone/device: →P.80 Calling on the Bluetooth phone: →P.112 Receiving on the Bluetooth phone: →P.115 Talking on the Bluetooth phone: →P.116 Message function Using the Bluetooth phone message function: →P.119 Setting up a phone Setting the Bluetooth phone/device: →P.83 PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) 108 SOME BASICS The hands-free system enables calls to be made and received without having to take your hands off the steering wheel. This system supports Bluetooth. Bluetooth is a wireless data system that enables cellular phones to be used without being connected by a cable or placed in a cradle. The operating procedure of the phone is explained here. WARNING llWhile driving, do not use a cellular phone or connect the Bluetooth phone. llThis system is fitted with Bluetooth antennas. People with implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverter defibrillators should maintain a reasonable distance between themselves and the Bluetooth antennas. The radio waves may affect the operation of such devices. llBefore using Bluetooth phones, users of any electrical medical device other than implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverter defibrillators should consult the manufacturer of the device for information about its operation under the influence of radio waves. Radio waves could have unexpected effects on the operation of such medical devices. CAUTION llDo not leave your cellular phone in the vehicle. The temperature inside may rise to a level that could damage the phone. NOTE llIf your cellular phone does not support Bluetooth, this system cannot function. Certain functions may not be available depending on the type of cellular phone. llIn the following conditions, the system may not function: • The cellular phone is turned off. • The current position is outside the communication area. • The cellular phone is not connected. • The cellular phone has a low battery. llWhen using the hands-free function and other Bluetooth functions at the same time, the following problems may occur: • The Bluetooth connection may be cut. • Noise may be heard when playing back voice with the Bluetooth function. llThe other party’s voice will be heard from the front speakers. The audio system will be muted during phone calls or when hands-free voice commands are used. llTalk alternately with the other party on the phone. If both parties speak at the same time, the other party may not hear what has been said. (This is not a malfunction.) llKeep call volume down. Otherwise, the other party’s voice may be audible outside the vehicle and voice echo may increase. When talking on the phone, speak clearly towards the microphone. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) 109 Phone 4 NOTE llThe other party may not hear you clearly when: • Driving on an unpaved road. (Making excessive traffic noise.) • Driving at high speeds. • Driving with a window open. • When air from the ventilator blows directly toward the microphone. • The sound of the air conditioning fan is loud. • There is a negative effect on sound quality due to the phone and/ or network being used. REGISTERING/CONNECTING A Bluetooth PHONE To use the hands-free system for cellular phones, it is necessary to register a cellular phone with the system. (→P.80) Bluetooth PHONE CONDITION DISPLAY The condition of the Bluetooth phone appears on the upper right side of the screen. (→P.76) USING THE PHONE SWITCH/MICROPHONE XXSteering switch By pressing the phone switch, a call can be received or ended without taking your hands off the steering wheel. Volume control switch ●●Press the switch upwards to increase the volume. ●●Press the switch downwards to decrease the volume. Off hook switch On hook switch PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) 110 XXMicrophone The microphone is used when talking on the phone. VOICE RECOGNITION SYSTEM Press this switch to operate the voice recognition system. ●● The voice recognition system and its list of commands can be operated. (→P.228) ABOUT THE CONTACTS IN THE CONTACT LIST ●● The following data is stored for every registered phone. When another phone is connected, the following registered data cannot be read: • Contact data • Call history data • Favorites data • All phone settings NOTE llWhen a phone’s registration is deleted, the above-mentioned data is also deleted. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) 111 Phone 4 CALLING ON THE Bluetooth PHONE After a Bluetooth phone has been registered, a call can be made using the hands-free system. There are several methods by which a call can be made, as described below. 1. Display the phone screen. (→P.108) 2. Select the desired button to call from. ●●By recent calls list: →P.112 ●●By favorites list: →P.113 ●●By keypad*1: →P.114 ●●By contacts list: →P.114 ●●By SMS/MMS: →P.123 ●●By POI call*2: →P.198 ●●By voice recognition system: →P.228 *1: The operation cannot be performed while driving. *2: 11.6-inch display with Navi system only NOTE llIf Siri is activated on an iPhone which is connected to the system via Bluetooth, an active call screen of the connected iPhone will be displayed. The iPhone can be operated using Siri. BY RECENT CALLS LIST 1. Display the phone screen. (→P.108) 2. Select Recents (Recents), and then select the desired contact. ●● The outgoing call screen is displayed. XX11.6-inch display system/11.6-inch display with Navi system XXDual 7.0-inch display system PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) 112 Select to display all latest call history items. Select to display missed calls. Displays the call type icons. : Missed call : Incoming call : Outgoing call NOTE llPressing on the steering wheel will make a call to the phone number displayed at the top of the list. llWhen a phone number registered in the contact list is received, the name is displayed. llInternational phone calls may not be made depending on the type of cellular phone you have. SORTING THE PHONEBOOK LIST The order of the phonebook list can be sorted by first name or last name. 1. Display the phone settings screen. (→P.83) 2. Select Phonebook/Recent Calls (Phonebook/Recent Calls). 3. → Sort Order (Sort Order) 4. Select the desired sorting criteria. BY FAVORITES LIST Calls can be made using registered contacts which can be selected from a contact list. For details on registering contacts:→P.114 Up to 15 contact lists can be registered in the favorites list. 1. Display the phone screen. (→P.108) 2. Select Favorites (Favorites), and then select the desired contact. 3. Select next to the desired number. ●● The outgoing call screen is displayed. NOTE llThis system’s favorites list and that of your Bluetooth phone are not synchronized. This system does not currently support transfer of favorites list data from the Bluetooth phone. To add the Bluetooth phone’s favorites list to the system’s favorites list, you need to register it through the system phonebook contacts list. (→P.114) PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) 113 Phone 4 DELETING ALL FAVORITES LIST 1. Display the phone settings screen. (→P.83) 2. Select Phonebook/Recent Calls (Phonebook/Recent Calls). 3. → Remove All Favorites (Remove All Favorites) → OK (OK) BY KEYPAD 1. Display the phone screen. (→P.108) 2. Select (Keypad). 3. Enter the phone number. → (Call) ●● The outgoing call screen is displayed. NOTE llDepending on the type of Bluetooth phone being connected, it may be necessary to perform additional steps on the phone. BY CONTACTS LIST Calls can be made by using contact data which is downloaded from the connected Bluetooth phone. 1. Display the phone screen. (→P.108) 2. Select (Phonebook), and then select the desired contact. ●●When is selected, changes to (yellow). • The number is registered in the favorites list. (→P.113) ●● Each time the symbol is selected, the symbol changes between and (yellow). 3. Select next to the desired number. ●●Numbers may include Home, Work, Mobile and Other as categories depending on the phonebook data of the connected cellular phone. ●● The outgoing call screen is displayed. NOTE llUp to 2000 contacts can be downloaded and displayed on the phonebook screen. (Up to 5 phone numbers per contact will be downloaded.) llWhen “Automatically Download Phonebook/Recent Calls” is set to on, contacts is downloaded automatically. (→P.91) PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) 114 RECEIVING ON THE Bluetooth PHONE INCOMING CALLS When a call is received, the incoming call screen pops up with sound. 1. Select Accept (Accept) or press the switch on the steering wheel to talk on the phone. To refuse to receive the call: Select Decline (Decline) or press the switch on the steering wheel. To adjust the volume of a received call: Turn the “ ” knob, or use the “VOL +/VOL -” switch on the steering wheel. NOTE llDuring international phone calls, the other party’s name or number may not be displayed correctly depending on the type of cellular phone you have. llThe ringtone volume can also be set from the sound settings screen. (→P.101) PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) 115 Phone 4 TALKING ON THE Bluetooth PHONE While talking on the phone, this screen is displayed. The operations outlined below can be performed on this screen. XX11.6-inch display system/11.6-inch display with Navi system XXDual 7.0-inch display system Select to mute your voice to the other party. Select to enter the desired numbers/output tones. Select to transfer the call. Select Transfer (Transfer) to change from a hands-free call to a cellular phone call. Select (Transfer Back) to change from cellular phone call to hands-free call. When a call is put on hold by pressing the switch on the steering wheel: Select to resume the on-hold call. Select to hang up the phone. Select to minimize the active call screen. NOTE llPressing switch on the steering wheel during a call will put the call on hold. Pressing switch on the steering wheel again will resume the onhold call. llChanging between cellular phone call and hands-free call can be performed by operating the cellular phone directly. llTransferring methods and operations will be different depending on the type of cellular phone you have. llFor the operation of the cellular phone, see the manual that comes with it. llTurn the “ ” knob, or use the “VOL +/VOL -” switch on the steering wheel to adjust the volume of the other party’s voice. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) 116 XXWhen using another function during a call By selecting (11.6-inch display system/11.6-inch display with Navi system), or pressing (Dual 7.0-inch display system), the active call screen will be minimized and other functions can be used. ●●By selecting (11.6-inch display system/11.6-inch display with Navi system), or pressing (Dual 7.0-inch display system), the active call screen will be maximized. CALL WAITING When a call is interrupted by a third party while talking, the incoming call screen pops up with sound. 1. Select Accept (Accept) or press the switch on the steering wheel to start talking with the other party. ●● The first call is put on hold. To refuse to receive the call: Select Decline (Decline) or press the switch on the steering wheel. To end both the first call and second call, press and hold on the steering wheel. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) 117 Phone 4 2. Check that the call waiting screen is displayed. XX11.6-inch display system/11.6-inch display with Navi system XXDual 7.0-inch display system ●● (Swap): Select to change parties. Each time (Swap) or name area is selected, or press the switch on the steering wheel, the party who is on hold will be switched. ●● Select (Merge) or press and hold the switch on the steering wheel to change to a conference call.* ●● Select End (End) or press the switch on the steering wheel to end the call and return to the conversation with the party on hold when having a twoway conversation, and to end the call with both parties when having a three-way conversation. ●● To end all of the calls connected, press and hold switch on the steering wheel. *: Depending on the company of the Bluetooth phone that is connected to the system, the conference call function may not be available. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) 118 Bluetooth PHONE MESSAGE FUNCTION Received messages can be forwarded from the connected Bluetooth phone, enabling checking and replying using the system. Depending on the type of Bluetooth phone connected, received messages may not be transferred to the message inbox. If the phone does not support the message function, this function cannot be used. Depending on the Bluetooth phone type, the screen display may differ, and it may not be possible to use certain functions. To use this function, it is necessary to set the phonebook download function to on. (→P.91) NOTE llDepending on the model of your Bluetooth phone, the setting of the connected phone may need to be changed. (ex: For iOS or other models, the notification setting may need to be activated.) For details, check the instructions for the connected Bluetooth phone. 1. Display the phone screen. (→P.108) 2. Select (Messages). 3. Check that the message inbox screen is displayed. ●● : Unread message icon ●●Receiving a message: →P.120 ●●Checking messages: →P.121 ●●Replying to a message (quick reply): →P.122 ●● Sending a new short message: →P.122 ●●Calling the message sender: →P.123 PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) 119 Phone 4 SETTING THE MESSAGE 1. Display the phone settings screen. (→P.83) 2. Select Message (Message). 3. Select the items to be set. Select to set the incoming message notification pop-up on/ off. Select to set automatically download messages on/off. Select to edit quick reply messages. (→P.122) RECEIVING A MESSAGE When an SMS/MMS is received, the incoming message screen pops up with sound and is ready to be operated on the screen. 1. Select (Play). ●● Select (Ignore) to not open the message. XXIf there are any unread messages The following screen is displayed. ●● (Inbox): Select to display the message inbox screen. ●● (Ignore): Select to not open the message. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) 120 PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) 121 Phone 4 2. The following screen is displayed. Select to have messages read out. • Select Stop (Stop) to stop the message read out. * Select to reply the message. (→P.122) Select to call the message sender. Select to close this screen. *: Depending on the Bluetooth phone that is connected to the audio system, this function is not available. NOTE llDepending on the cellular phone used for receiving messages, or its registration status with the system, some information may not be displayed. CHECKING MESSAGES 1. Display the message inbox screen. (→P.119) 2. Select the desired message from the list. 3. Check the message. (→P.120) NOTE llDepending on the type of Bluetooth phone being connected, it may be necessary to perform additional steps on the phone. llOnly received messages on the connected Bluetooth phone can be displayed. llThe text of the message is not displayed while driving. llTurn the “ ” knob, or use the “VOL +/VOL -” switch on the steering wheel to adjust the message readout volume. REPLYING TO A MESSAGE (QUICK REPLY)* *: Depending on the Bluetooth phone that is connected to the audio system, this function is not available. 1. Display the message inbox screen. (→P.119) 2. Select the desired message from the list. 3. → (Reply) 4. Select the desired message. 5. → Send (Send) ●● Change (Change): Select to change the message. ●● Cancel (Cancel): Select to cancel sending the message. NOTE ll10 messages have already been stored. SENDING A NEW SHORT MESSAGE 1. Display the favorites detail screen (→P.113), the recent calls list screen (→P.112) or the contact detail screen (→P.114). 2. Select next to the desired number. 3. Select the desired message. 4. → Send (Send) ●● Change (Change): Select to change the message. ●● Cancel (Cancel): Select to cancel sending the message. EDITING THE QUICK REPLY MESSAGE XXEditing the message in the phone settings screen 1. Display the phone settings screen. (→P.83) 2. Select Message (Message). 3. → Quick Reply Messages (Quick Reply Messages) 4. → Edit (Edit) 5. Select the desired message. 6. Enter the message. → OK (OK) PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) 122 XXEditing the message in the message screen 1. Display the message inbox screen. (→P.119) 2. Select the desired message from the list. 3. → (Reply) 4. Select next to the desired message. 5. Enter the message. → OK (OK) DELETING THE QUICK REPLY MESSAGE 1. Display the phone settings screen. (→P.83) 2. Select Message (Message). 3. → Quick Reply Messages (Quick Reply Messages) 4. → Edit (Edit) 5. Select next to the desired message. ADDING THE QUICK REPLY MESSAGE 1. Display the phone settings screen. (→P.83) 2. Select Message (Message). 3. → Quick Reply Messages (Quick Reply Messages) 4. → (Add) 5. Enter the message. → OK (OK) CALLING THE MESSAGE SENDER Calls can be made to an SMS/MMS message sender’s phone number. 1. Display the message inbox screen. (→P.119) 2. Select next to the desired sender. ●● The outgoing call screen is displayed. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) 123 Phone 4 MEMO 124 125 Apps Apps Before Using Applications 126 Before Using Applications žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 126 Settings Required To Use Applications ž ž ž ž ž ž ž ž ž ž ž 127 About App-based Connected Content žž ž ž ž ž ž ž ž ž ž 127 Communication Standards Regarding Application žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 128 Apple CarPlay 129 Apple CarPlay ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 129 Connecting The Apple CarPlay Device ž ž ž ž ž ž ž ž ž ž ž 130 Overview ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 130 Enabling Apple CarPlay žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 131 Selecting Device To Connect To Apple CarPlay žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 132 Disabling Apple CarPlay žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 132 Deleting The Apple CarPlay Device ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 132 Android Auto 133 Android Auto žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 133 Connecting An Android Auto Device žž ž ž ž ž ž ž ž ž ž ž ž 134 Overview ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 134 Enabling Android Auto ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 136 Selecting Android Auto Devices To Connect To Android Auto ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 136 Disabling Android Auto ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 136 Deleting The Android Auto Device žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 136 SiriusXM Travel Link 137 SiriusXM Travel Link ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 137 Displaying Sports Information žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 137 Displaying Weather Information ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 138 Displaying Weather Alerts žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 140 Displaying Stocks Information žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 141 Displaying Fuel Information ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 142 Displaying Parking Information ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 143 BEFORE USING APPLICATIONS BEFORE USING APPLICATIONS Precautions to be aware of when using applications are shown below. In this chapter, iPhone or Android devices will be referred to as a smartphone. WARNING llDo not connect or operate the smartphone while driving. llBe sure to park the vehicle in a safe place before connecting or operating the smartphone. CAUTION llDo not leave your smartphone in the vehicle. In particular, high temperatures inside the vehicle may damage the smartphone. llDo not push down on or apply unnecessary pressure to the smartphone while it is connected as this may damage the smartphone or its terminal. llIf connecting your smartphone via USB, do not insert foreign objects into the USB port as this may damage the smartphone or its terminal. NOTE llDepending on the application, certain functions are not available while driving for reasons of safety. llIn order to maximize signal reception, performance and precision of the smartphone, please ensure the smartphone is placed as close to the system as possible, while ensuring it is stowed and secure while driving. llWhen connecting your smartphone via USB, use the original cables provided with your smartphone or equivalent third-party (certified) cables. llIf a smartphone is connected to the USB port, turning the ignition switch to the “ACC” or “ON” position will start charging the smartphone. llIf connecting your smartphone via USB, smartphone may not be recognized when the ignition switch is turned to the “ACC” or “ON” position. In this case, remove the smartphone and reconnect it. llThe accuracy of the displayed information or the signal reception performance depends on the smartphone or the connected device, and its wireless connection. llFor operating the smartphone, see the instruction manual that comes with it. llFollow the specific operation procedures for the smartphone application. llWhen connecting the device via Bluetooth, the communication speed may become slower than via USB. llIf the application is not running smoothly or is unstable, disconnect and reconnect the smartphone via Bluetooth (→P.87) and/or USB cable (→P.70). If the problem continues, reboot the smartphone. BEFORE USING APPLICATIONS 126 SETTINGS REQUIRED TO USE APPLICATIONS In order to use an application on this system, the application must be installed on your smartphone. ●● Search and download the application from your smartphone app. • iPhone: App Store via iTunes • Android device: Google Play Store ●●Create an account and login to the application on the smartphone. NOTE llPlease use the latest version of the application. llApple CarPlay does not require an application to be installed. Refer to “Apple CarPlay” for details on Apple CarPlay operation. (→P.129) ABOUT APP-BASED CONNECTED CONTENT Requirements for using the connected content services of the application on this system. ●● The latest version of the system is compatible with connected content application(s) for the smartphones, and is downloaded to your smartphone. ●●A current account with a wireless content service provider. ●●A smartphone data plan: If the data plan for your smartphone does not provide for unlimited data usage, additional charges from your carrier may apply for accessing app-based connected content via 3G, 4G, Wi-Fi®, or 4G LTE wireless networks. ●●Connection to the internet via 3G, 4G, Wi-Fi®, or 4G LTE networks. NOTE llChanges to product specifications may result in differences between the content of the manual and features of the product. llBe careful not to exceed the data usage limits for your smartphone. Doing so will result in additional data usage charges from your phone carrier. BEFORE USING APPLICATIONS 127 Apps 5 NOTE llLimitations: • Access to app-based connected content will depend on the availability of wireless cellular and/or Wi-Fi® network coverage for the purpose of allowing your smartphone to connect to the internet. • Service availability may be geographically limited by region. Consult the wireless connected content service provider for additional information. • Ability of this product to access connected content is subject to change without notice and could be affected by any of the following: compatibility issues with future firmware versions of the smartphone; compatibility issues with future versions of the connected content application(s) for the smartphone; changes to or discontinuation of the connected content application(s) or service by its provider. llSince some applications use signals from GPS satellites and wireless communication lines, they may not work properly in the following locations. • In tunnels • In underground parking lots • Outside wireless communication range, such as some countryside areas • Where the wireless communication network is congested, or where communications are restricted llDepending on the circumstances and environment, the signal may be weak or not be received. In such cases, an error may occur. llCommunication and phone call charges for smartphones should be paid by the wireless subscriber. llIf you lose the data in a smartphone or other device while using it with the system, no compensation will be given for the lost data. NOTE llSUBARU CORPORATION does not guarantee content provided by the application. llThe application may not work due to factors on smartphones, smartphone applications or stations. SUBARU CORPORATION accepts no responsibility for this. COMMUNICATION STANDARDS REGARDING APPLICATION For connecting wireless Apple CarPlay or wireless Android Auto, Wi-Fi® communication is used. The vehicle is compatible with the following Wi-Fi® communication standards: ●●Communication standards: • IEEE802.11a • IEEE802.11b • IEEE802.11g • IEEE802.11n • IEEE802.11ac ●● Security: • WPATM • WPA2TM • WPA3TM NOTE llWPA, WPA2 and WPA3 are registered mark of the Wi-Fi Alliance®. llAs the frequency band used for Wi-Fi® differs by country or region, it may not be possible to use 5GHz band. BEFORE USING APPLICATIONS 128 Apple CarPlay Apple CarPlay Apple CarPlay can be used to view Apple Maps, play music, and place calls by connecting an Apple CarPlay device to the system. Supported applications can also be run. ●● For details on the services or the operations, check the Apple CarPlay site (https://www.apple.com/ios/carplay/). XX11.6-inch display system/11.6-inch display with Navi system To enable the use of the Apple CarPlay application on the vehicle system, register a device compatible with Apple CarPlay to the vehicle system and connect them wirelessly. XXDual 7.0-inch display system To use the Apple CarPlay application, connect an Apple CarPlay device to the USB port. When using the application, read the precautions indicated in “BEFORE USING APPLICATIONS”. (→P.126) WARNING llThis system is fitted with Wi-Fi® antennas. People with implantable cardiac pacemakers, cardiac resynchronization therapypacemakers or implantable cardioverter defibrillators should maintain a reasonable distance between themselves and the Wi-Fi® antennas. The radio waves may affect the operation of such devices. llBefore using Wi-Fi® devices, users of any electrical medical device other than implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverter defibrillators should consult the manufacturer of the device for information about its operation under the influence of radio waves. Radio waves could have unexpected effects on the operation of such medical devices. NOTE llUse an undamaged genuine USB cable when using this function. (Dual 7.0-inch display system only) llEnable Apple CarPlay in the Apple CarPlay device’s restriction settings before using this function. Apple CarPlay 129 Apps 5 CONNECTING THE Apple CarPlay DEVICE XX11.6-inch display system/11.6-inch display with Navi system 1. Connect a device compatible with Apple CarPlay. (→P.87) 2. Check the confirmation message, and then select Yes (Yes). ●● The Apple CarPlay screen will be displayed. ●● If No (No) is selected, Apple CarPlay will not start. When connected to a USB port, the device will be recognized as an iPod/iPhone. (→P.169) When not connected to a USB port, the device will be recognized as a Bluetooth device. (→P.172) XXDual 7.0-inch display system 1. Connect a device compatible with Apple CarPlay. (→P.70) 2. Check the confirmation message, and then select Yes (Yes). ●● The Apple CarPlay screen will be displayed. ●● If No (No) is selected, Apple CarPlay will not start, and the device will be recognized as an iPod/iPhone. (→P.169) ●● If “Don’t show again.” is selected, the confirmation message will not be displayed again. If the connected device cannot be used as an Apple CarPlay device, change the Apple CarPlay device connection settings. (→P.132) OVERVIEW Select Apple CarPlay (Apple CarPlay) on the home screen or the apps screen (→P.19, 20, 43, 44) to display the Apple CarPlay screen. Apple CarPlay 130 XXControl screen* XX11.6-inch display system/11.6-inch display with Navi system XXDual 7.0-inch display system *: The displayed screen will differ depending on the connected Apple CarPlay device. Displays the application buttons. Select to start the application. Select to change the home screen of Apple CarPlay. ABOUT THE SUPPORTED DEVICES This system compatible with iOS 16.3.1 or later are supported. ENABLING Apple CarPlay XX11.6-inch display system/11.6-inch display with Navi system only 1. Select . 2. Select a device to be used for Apple CarPlay from the device list. 3. Select Apple CarPlay from the connection preference list to enable it. Apple CarPlay 131 Apps 5 SELECTING DEVICE TO CONNECT TO Apple CarPlay XXDual 7.0-inch display system only This setting can be changed only if “Don’t show again.” was selected on the confirmation message displayed when an Apple CarPlay device was connected. 1. Display the phone settings screen. (→P.83) 2. Select Apple CarPlay (Apple CarPlay). 3. → Device List (Device List) 4. → Edit (Edit) 5. Touch the desired device compatible with Apple CarPlay to connect/disconnect it. 6. → OK (OK) DISABLING Apple CarPlay XX11.6-inch display system/11.6-inch display with Navi system only 1. Select . 2. Select the desired device used for Apple CarPlay from the device list. 3. Select Apple CarPlay from the connection preference list to disable it. DELETING THE Apple CarPlay DEVICE XXDual 7.0-inch display system only This setting can be changed only if “Don’t show again.” was selected on the confirmation message displayed when an Apple CarPlay device was connected. 1. Display the phone settings screen. (→P.83) 2. Select Apple CarPlay (Apple CarPlay). 3. → Device List (Device List) 4. → Edit (Edit) 5. Select next to the desired device name. 6. → Yes (Yes) 7. → OK (OK) Apple CarPlay 132 Android Auto Android Auto Android Auto can be used to view Google Maps, play music, and place calls by connecting an Android Auto device to the system. Supported applications can also be run. ●● For details on the services or the operations, check the Android Auto site (https://www.android.com/auto/) and (https://support.google.com/androidauto/). XX11.6-inch display system/11.6-inch display with Navi system The Android Auto application can be used in either of the following methods: ●●Register a device compatible with Android Auto to the vehicle system then connect it wirelessly. ●●Connect a device compatible with Android Auto to a USB port. XXDual 7.0-inch display system To use the Android Auto application, connect your Android Auto device to the USB port. When using the application, read the precautions indicated in “BEFORE USING APPLICATIONS”. (→P.126) WARNING llThis system is fitted with Wi-Fi® antennas. People with implantable cardiac pacemakers, cardiac resynchronization therapypacemakers or implantable cardioverter defibrillators should maintain a reasonable distance between themselves and the Wi-Fi® antennas. The radio waves may affect the operation of such devices. llBefore using Wi-Fi® devices, users of any electrical medical device other than implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverter defibrillators should consult the manufacturer of the device for information about its operation under the influence of radio waves. Radio waves could have unexpected effects on the operation of such medical devices. NOTE llUse an undamaged genuine USB cable when connecting to a USB port to use Android Auto. llTo use this function, check to make sure that your Android Auto device is set to accept connection with a new vehicle. llDepending on the model, the talkback volume of the voice recognition function of Android Auto may differ from the volume setting of other functions. Set the volume to a level that is easy to hear. Android Auto 133 Apps 5 CONNECTING AN Android Auto DEVICE XX11.6-inch display system/11.6-inch display with Navi system 1. Connect a device compatible with Android Auto. (→P.70, 87) 2. Check the confirmation message, and then select Yes (Yes). ●● The Android Auto screen will be displayed. ●● If No (No) is selected, Android Auto will not start. XXDual 7.0-inch display system 1. Connect a device compatible with Android Auto. (→P.70) 2. Check the confirmation message, and then select Yes (Yes). ●● The Android Auto screen will be displayed. ●● If No (No) is selected, Android Auto will not start. ●● If “Don’t show again.” is selected, the confirmation message will not be displayed again. If the connected device cannot be used as an Android Auto device, change the Android Auto device connection settings. (→P.136) OVERVIEW Select Android Auto (Android Auto) on the home screen or the apps screen (→P.19, 20, 43, 44) to display the Android Auto screen. Android Auto 134 XXControl screen* XX11.6-inch display system/11.6-inch display with Navi system XXDual 7.0-inch display system *: The displayed screen will differ depending on the connected Android Auto device. Displays the application buttons. Select to start the application. ABOUT THE SUPPORTED DEVICES This system compatible with Android 11.0 or later are supported. Android Auto 135 Apps 5 ENABLING Android Auto XX11.6-inch display system/11.6-inch display with Navi system only 1. Select . 2. Select a device to be used for Android Auto from the device list. 3. Select Android Auto from the connection preference list to enable it. SELECTING Android Auto DEVICES TO CONNECT TO Android Auto XXDual 7.0-inch display system only This setting can be changed only if “Don’t show again.” was selected on the confirmation message displayed when an Android Auto device was connected. 1. Display the phone settings screen. (→P.83) 2. Select Android Auto (Android Auto). 3. → Device List (Device List) 4. → Edit (Edit) 5. Select for the desired Android Auto device. DISABLING Android Auto XX11.6-inch display system/11.6-inch display with Navi system only 1. Select . 2. Select the desired device used for Android Auto from the device list. 3. Select Android Auto from the connection preference list to disable it. DELETING THE Android Auto DEVICE XXDual 7.0-inch display system only This setting can be changed only if “Don’t show again.” was selected on the confirmation message displayed when an Android Auto device was connected. 1. Display the phone settings screen. (→P.83) 2. Select Android Auto (Android Auto). 3. → Device List (Device List) 4. → Edit (Edit) 5. Select next to the desired device name. 6. → Yes (Yes) 7. → OK (OK) Android Auto 136 SiriusXM Travel Link SiriusXM Travel Link* *: SiriusXM U.S. satellite and data services are available only in the 48 contiguous USA and DC. SiriusXM satellite service is also available in Canada; see www.siriusxm.ca. Data service information, which is comprised of sports information, weather information, stock information, parking information and fuel information, can be received via the SiriusXM® Radio. To receive the data service information in the vehicle, a subscription to the SiriusXM® Radio Service is necessary following a free trial. (→P.161) Content that uses the SiriusXM® Radio Service is reset when personal information is initialized by selecting Factory Data Reset (Factory Data Reset) at the “GENERAL SETTINGS SCREEN”. (→P.94) NOTE llInformation available on the SiriusXM Travel Link services can be registered, within limited numbers. DISPLAYING SPORTS INFORMATION Sports information such as games and results, the status of games still in progress, and future game schedules can be displayed. 1. Select Travel Link (Travel Link) on the Apps screen. (→P.29, 60) 2. → Sports (Sports) SiriusXM Travel Link 137 Apps 5 3. Check that sports information is displayed. XX11.6-inch display system/11.6-inch display with Navi system XXDual 7.0-inch display system Select to display the favorite teams information. Favorite Team (Favorite Team): Select to register, edit or select your favorite team. Select to display all information for a selected sport. Headlines (Headlines): Select to display the headlines. Change Sport (Change Sport): Select to change the sport. Select to change the displayed information. Select to listen to a broadcast. DISPLAYING WEATHER INFORMATION Weather forecasts, forecast temperature or highest/lowest temperature, and the chances of precipitation, etc. can be displayed in weather information. 1. Select Travel Link (Travel Link) on the Apps screen. (→P.29, 60) 2. → Weather (Weather) SiriusXM Travel Link 138 3. Check that weather information is displayed. XX11.6-inch display system/11.6-inch display with Navi system XXDual 7.0-inch display system Select to switch the timing of the displayed forecast. * Select to display the weather forecast for the route being traveled during route guidance. * Select to display the weather forecast from your current location to your destination. Select to change the region which information will be displayed. The region can be selected from registered favorites or a full list of regions. Select to add the currently displayed location as a favorite. Weather information is displayed. *: 11.6-inch display with Navi system only SiriusXM Travel Link 139 Apps 5 DISPLAYING WEATHER ALERTS Weather alerts can be displayed. 1. Select Travel Link (Travel Link) on the Apps screen. (→P.29, 60) 2. → Weather Alerts (Weather Alerts) 3. Check that weather alerts are displayed. XX11.6-inch display system/11.6-inch display with Navi system XXDual 7.0-inch display system SiriusXM Travel Link 140 Select to sort weather alerts by priority. Select to sort weather alerts by distance. * Select to display the weather alerts from your current location to your destination. Select to change the region which information will be displayed. The region can be selected from registered favorites or a full list of regions. Select to add the favorite regions list. Select to set the alert types, zone and notifications. Weather alerts are displayed. *: 11.6-inch display with Navi system only DISPLAYING STOCKS INFORMATION Company names, stock prices, and price fluctuations can be displayed in stock information. Fluctuations greater than zero are displayed with green arrows, and fluctuations less than zero are displayed with red arrows. 1. Select Travel Link (Travel Link) on the Apps screen. (→P.29, 60) 2. → Stocks (Stocks) 3. Check that stock information is displayed. XX11.6-inch display system/11.6-inch display with Navi system XXDual 7.0-inch display system SiriusXM Travel Link 141 Apps 5 Select to add stocks. Select to delete stocks. Stock information is displayed. DISPLAYING FUEL INFORMATION Gas station information can be displayed, and gas stations can be set* as the destination. When Bluetooth is enabled on your cellular phone, calls can be placed if the displayed information screen contains phone number information. *: 11.6-inch display with Navi system only 1. Select Travel Link (Travel Link) on the Apps screen. (→P.29, 60) 2. → Fuel Prices (Fuel Prices) 3. Check that fuel information is displayed. XX11.6-inch display system/11.6-inch display with Navi system XXDual 7.0-inch display system SiriusXM Travel Link 142 *1 Select to sort the display order of gas stations by distance from the current position. *2 Select to sort the display order of gas stations by price. Select to sort the display order of gas stations by brand. Select to change the location for which fuel information is displayed. Select to set the fuel type. Select to change the country which information will be displayed. *1 Select to update the gas station information. Select to display information about a gas station and be able to add it to favorites. Select to display the favorite gas stations list. *1 Select to display the currently displayed gas stations on the map. *1: 11.6-inch display with Navi system only *2: Not available when “US & CAN” is selected for countries for which information is displayed DISPLAYING PARKING INFORMATION Parking information can be displayed, and parking can be set* as the destination. When Bluetooth is enabled on your cellular phone, calls can be placed if the displayed information screen contains phone number information. *: 11.6-inch display with Navi system only 1. Select Travel Link (Travel Link) on the Apps screen. (→P.29, 60) 2. → Parking (Parking) SiriusXM Travel Link 143 Apps 5 3. Check that parking information is displayed. XX11.6-inch display system/11.6-inch display with Navi system XXDual 7.0-inch display system Select to change the region which information will be displayed. * Select to update the parking information. Select to display information about a parking lot and be able to add it to favorites. * Select to display the currently displayed parking lots on the map. Select to sort parking lots by price per day. Select to sort parking lots by price per hour. * Select to sort the display order of parking lots by distance from the current position. Select to display the favorite parking lots list. *: 11.6-inch display with Navi system only SiriusXM Travel Link 144 145 Audio Audio Basic Operation 146 Some Basics žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 146 Turning The System On And Off žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 146 Selecting An Audio Source žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 147 Sound Settings ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 149 Voice Recognition System žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 152 Radio Operation 153 AM/FM Radio žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 153 Overview ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 153 Registering A Station As A Preset ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 154 Selecting A Station From The List ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 154 Radio Broadcast Data System žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 155 Available HD RadioTM Technology žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 155 Caching Radio Programs ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 157 SiriusXM® Radio ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 159 Overview ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 159 How To Subscribe To SiriusXM® žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 161 Displaying The Radio ID ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 163 Presetting A Channel ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 163 Searching For A Current Content žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 163 Media Operation 165 CD žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 165 Overview ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 165 USB Memory žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 167 Overview ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 167 iPod/iPhone ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 169 Connecting The iPod/iPhone ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 169 Overview ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 169 Bluetooth Audio žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 172 Overview ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 172 Connecting A Bluetooth Device žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 175 AUX žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 176 Overview ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 176 Apple CarPlay ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 177 Connecting An Apple CarPlay Device ž ž ž ž ž ž ž ž ž ž ž ž 177 Overview ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 178 Android Auto žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 180 Connecting An Android Auto Device žž ž ž ž ž ž ž ž ž ž ž ž 180 Overview ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 180 Audio Remote Controls 183 Steering Wheel Controls ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 183 Tips For Operating The Audio System 185 Operating Information žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 185 Radio žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 185 CD Player And Disc žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 187 USB Memory Device ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 190 iPod/iPhone žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 190 File Information žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 191 BASIC OPERATION SOME BASICS This section describes some of the basic features of the audio system. Some information may not pertain to your system. Your audio system works when the ignition switch is turned to the “ACC” or “ON” position. CAUTION llTo prevent the battery from being discharged, do not leave the audio system on longer than necessary when the engine is not running. TURNING THE SYSTEM ON AND OFF “ ” knob: Press and hold until a message is displayed, wait a few seconds for the audio system to turn off. To turn the audio system on, press and hold the knob again or perform the following: ●● 11.6-inch display system/11.6-inch display with Navi system: Touch the screen to display and select it. ●●Dual 7.0-inch display system: Press . The system will turn on with the last audio source used. Turn this knob to adjust the volume. Press to turn the volume mute on/off. XXDual 7.0-inch display system only , : Press to display screen buttons for the audio system. BASIC OPERATION 146 NOTE llThe audio system will remain off if you change the position of the ignition switch from “LOCK”/“OFF” to “ACC”/“ON” while the audio system is off. If you had set the volume to mute, the audio system will remain mute and the track will start playing from where it was last stopped. SELECTING AN AUDIO SOURCE XX11.6-inch display system/11.6-inch display with Navi system 1. Select . 2. Select Radio (Radio) or (Media). 3. Select the desired audio source. BASIC OPERATION 147 Audio 6 XXDual 7.0-inch display system 1. Press or . 2. Select the desired audio source. ●● Each time or is pressed, the audio source can also be changed. BASIC OPERATION 148 SOUND SETTINGS DISPLAYING THE SOUND CUSTOMIZATION SCREEN 1. Display the home screen. (→P.19, 43) 2. Select Settings (Settings). 3. → Sound (Sound) 4. → Audio (Audio) 5. → Sound Customization (Sound Customization) EQUALIZER SETTINGS How good an audio program sounds is largely determined by the mix of the treble, mid and bass levels. In fact, different kinds of music and vocal programs usually sound better with different mixes of treble, mid and bass. 1. Display the “Sound Customization” screen. (→P.149) 2. Select Equalizer (Equalizer). 3. Set the desired item. XX11.6-inch display system/11.6-inch display with Navi system XXDual 7.0-inch display system BASIC OPERATION 149 Audio 6 Select the sliders to adjust low-pitched tones. Select the sliders to adjust mid-pitched tones. Select the sliders to adjust high-pitched tones. Select to reset all setup items. BALANCE/FADER SETTINGS A good balance of the left and right stereo channels and of the front and rear sound levels is also important. Keep in mind that when listening to a stereo recording or broadcast, changing the right/left balance will increase the volume of 1 group of sounds while decreasing the volume of another. 1. Display the “Sound Customization” screen. (→P.149) 2. Select Balance/Fader (Balance/Fader). 3. Adjust to the desired position. XX11.6-inch display system/11.6-inch display with Navi system XXDual 7.0-inch display system Select the icon to adjust sound balance. Select to reset the adjusted position. BASIC OPERATION 150 VOCAL IMAGE CONTROL SETTINGS* *: This setting can be made depending on the connected amplifier type. Extract only vocal sound from whole sound and adjust volume balance of it. 1. Display the “Sound Customization” screen. (→P.149) 2. Select Vocal Image Control (Vocal Image Control). 3. Adjust to the desired position. XX11.6-inch display system/11.6-inch display with Navi system XXDual 7.0-inch display system BASIC OPERATION 151 Audio 6 Select the icon to adjust vocal image control. Select to set the virtual stage enhancer function. This function adjusts the sounds to the high realistic surround sound by enhancing the vocals. When this setting is on, the front and rear setting of “Vocal Image Control” cannot be set. Select to reset the vocal image control settings. VOICE RECOGNITION SYSTEM 1. Press this switch to operate the voice recognition system. ●● The voice recognition system and its list of commands can be operated. (→P.228) BASIC OPERATION 152 RADIO OPERATION AM/FM RADIO OVERVIEW The FM/AM radio operation screen can be accessed by selecting FM (FM) or AM (AM) on the radio control screen. (→P.147) XXControl panel Turn to adjust the volume. Press to mute the audio system. Press and hold to turn the audio system off, and press and hold to turn it on again. Turn to step up/down frequencies. Press and hold to display the sound customization screen. (→P.149) XXControl screen XX11.6-inch display system/11.6-inch display with Navi system XXDual 7.0-inch display system RADIO OPERATION 153 Audio 6 Select to change radio modes. Press and hold to save a specific song to your Bookmark List. (→P.102) Select to display the sound customization screen. (→P.149) * Select to change multicast channels available. (→P.156) Select to step up/down frequencies. Select and hold to seek frequencies. Select to scan for receivable stations/channels. The scan will continue until selected again. Select to search for stations by entering frequency number. Select to turn HD Radio mode on/off. Select to display the cache radio operation buttons. (→P.157) Select to display a list of receivable stations. (→P.154) Select to scroll the list of preset buttons. Select to tune to preset stations/channels. The preset station list can be scrolled by swiping the list. *: FM Radio only NOTE llThe radio automatically changes to stereo reception when a stereo broadcast is received. llWhen the HD Radio mode is on, the radio automatically tunes to an HD Radio signal in AM or FM where available. REGISTERING A STATION AS A PRESET Multiple stations can be registered as presets. 1. Tune to the desired station. 2. Select and hold one of the desired preset station buttons. ●● To change the preset station to a different one, follow the same procedure. SELECTING A STATION FROM THE LIST A station list can be displayed. 1. Select Station List (Station List). ●● Update (Update): Select to update the station list. XXFM Radio only 2. Select the desired list. ●● All (All): Select to display all stations. ●● Genres (Genres): Select to display categories. 3. Select the desired station. RADIO OPERATION 154 RADIO BROADCAST DATA SYSTEM This audio system is equipped with Radio Broadcast Data Systems (RBDS). RBDS mode allows text messages to be received from radio stations that utilize RBDS transmitters. RBDS features are available only when listening to an FM station that broadcasts RBDS information. AVAILABLE HD Radio™ TECHNOLOGY HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S. and Foreign Patents. For patents see http://dts.com/patents. HD Radio, Artist Experience, and the HD, HD Radio, and “ARC” logos are registered trademarks or trademarks of iBiquity Digital Corporation in the United States and/or other countries. RADIO OPERATION 155 Audio 6 MULTICAST On the FM radio frequency most digital stations have additional programs on one FM station. 1. Select . ●● Each time is selected, the channel can be changed. ●●HD RadioTM Technology improves the audio quality of your local stations and delivers a crystal clear digital signal to your receiver. HD Radio Technology enables local radio stations to broadcast a clean digital signal. AM sounds like today’s FM and FM sounds like clear digital. ●● FM stations can provide additional digital-only audio programming on HD2/HD3 Channels. ●● EXAMPLE: 101.1 HD1 101.1 HD2 101.1 HD3 NOTE llHD Radio™ stations can be preset. llAn orange will be displayed on the screen when in digital. The will first appear in a gray color indicating the digital station is being acquired. Once the digital signal is acquired, the logo will change to a bright orange color. llThe song title and artist name will appear on the screen when available by the radio station. The radio station can send album pictures when available. llAs a user works through the analog radio stations, (where applicable) the radio receiver will automatically tune from an analog signal to a digital signal within 5 seconds. ●●Program info provides song name, artist, station ID, and other relevant data to your receiver. ●●Visual images of album cover art and station logos are broadcasted with the audio to your receiver, such as Album Art, historical photographs, still art from live broadcasts, station logos, among other related content. ●●Allows HD Radio receivers to store content (songs/programs and data) in a buffer. Playback shall start at any point in the buffer and shall continue until the end of the buffer or until the user has selected to stop playback. Live Pause has the ability to store both analog and digital content in the buffer. RADIO OPERATION 156 CACHING RADIO PROGRAMS A radio program can be cached and played back in a timeshifted manner. AUTOMATIC PLAYBACK OF THE CACHE If the radio broadcast is interrupted by another audio output, such as an incoming phone call, the system will automatically cache the interrupted portion. To manually operate the cache operation: →P.157 NOTE llThe system can store up to 30 minutes. Cached data will be erased when the radio mode or station is changed or when the audio system is turned off. PLAYING BACK THE CACHE MANUALLY The broadcast cached in the program cache can be played back manually. 1. Select (Replay). (→P.153) RADIO OPERATION 157 Audio 6 2. Select the desired cache radio operation button. XX11.6-inch display system/11.6-inch display with Navi system XXDual 7.0-inch display system Shows the current playback location. The playback location can be changed by dragging the sliders. Select to display the preset stations/channels. (→P.153) Select: Skips forward 5 seconds. Select and hold: Fast forwards continuously. Pauses or plays the radio broadcast. Select: Skips backward 5 seconds. Select and hold: Fast rewinds continuously. NOTE llThe time displayed on the bar scale may differ from the actual time. RADIO OPERATION 158 SiriusXM® Radio OVERVIEW The SiriusXM® control screen can be accessed by selecting SiriusXM (SiriusXM) on the radio control screen. (→P.147) XXControl panel Turn to adjust the volume. Press to mute the audio system. Press and hold to turn the audio system off, and press and hold to turn it on again. Turn to step up/down channels. Press and hold to display the sound customization screen. (→P.149) XXControl screen XX11.6-inch display system/11.6-inch display with Navi system XXDual 7.0-inch display system RADIO OPERATION 159 Audio 6 Select to change radio modes. *1 The following buttons will be displayed for some time when operable: • Start Over (Start Over): Select to replay currently aired program of IP (Internet Protocol) broadcast from the beginning. • Restart Episode (Restart Episode): Select to replay currently aired episode of On-Demand broadcast from the beginning. • Switch to Satellite (Switch to Satellite)/ Switch to Internet (Switch to Internet): Select to switch Satellite/IP (Internet Protocol) of the same content. • Subscribe (Subscribe): Select to display the phone number of SiriusXM® customer care and your radio ID. (Call): Select to make a call when a Bluetoothcompatible phone is connected. Select to display the sound customization screen. (→P.149) Select to display the SiriusXM® radio setting screen. (→P.104) *2 Select to enable/disable notification of registered sports teams or music artists/tunes, such as their game match starting time or tune to be played. Select to display currently available channels and select a channel. Can be swiped for a tune. • Direct Tune (Direct Tune): The channel list screen can be changed to channel number entering screen to search a channel. *2 Select to operate previous content of the currently selected channel that is cashed in the vehicle system. • : Select to skip back the cashed content. • / : Select to pause/release pause of the cached content playback. • : Select to skip forward the cashed content until “LIVE” is displayed. Dual 7.0-inch display system only: • Subscribe (Subscribe)*1: Select to display the phone number of SiriusXM® customer care and your radio ID. *3 Select to display a list of contents related to the current content you are listening to. Select to display a list of contents recommended to the user. Select to display a channel list by category. *3*4 Select to display the search screen. (→P.164) Select to scroll the list of preset buttons. Select to tune to preset channels. The preset channel list can be scrolled by swiping the list. *5 Select to search channels by entering the channel number. *1: Displayed before subscribing to SiriusXM® radio *2: Displayed after subscribing to SiriusXM® radio *3: Operation is available after subscribing to SiriusXM® radio *4: 11.6-inch display system/11.6-inch display with Navi system only *5: Dual 7.0-inch display system only RADIO OPERATION 160 HOW TO SUBSCRIBE TO SiriusXM® To listen to a SiriusXM broadcast in the vehicle, a subscription to SiriusXM is required following any trial included with the purchase of your vehicle. SiriusXM is only available in the U.S. and Canada. HOW TO SUBSCRIBE SiriusXM audio and infotainment services provided by Sirius XM Radio Inc. Trial Subscription Details: Your SiriusXM trial subscription will automatically stop at the end of your trial period. If you decide to purchase a subscription plan after your trial, your service will automatically renew in accordance with your selected plan and you will be charged according to your chosen payment method at the then-current rates, plus applicable fees and taxes. Services are subject to the SiriusXM Customer Agreement and Privacy Policy available at siriusxm.com (if in Canada, Siriusxm.ca) which includes complete terms and how to cancel. All fees, content and features are subject to change. ●● For more information on your SiriusXM service or to subscribe please refer to the following: XXU.S.A. Refer to www.siriusxm.com or call To Subscribe: 1-877-447-0011. To Cancel: 1-866-635-2349. XXCanada Refer to www.siriusxm.ca or call To Subscribe/Cancel: 1-877-209-0079. RADIO OPERATION 161 Audio 6 WARNING llExplicit Language Notice — Channels with frequent explicit language are indicated with an “XL” preceding the channel name. Channel blocking is available for SiriusXM® Radio receivers by notifying SiriusXM at; U.S.A. Customers: Visit www.siriusxm.com or calling 1-877-447-0011 Canadian Customers: Visit www.siriusxm.ca or calling 1-877-209-0079 CAUTION llIt is prohibited to copy, decompile, disassemble, reverse engineer, hack, manipulate, or otherwise make available any technology or software incorporated in receivers compatible with the SiriusXM® Radio Services or that support the SiriusXM website, the Streaming Service or any of its content. Furthermore, the AMBE® voice compression software included in this product is protected by intellectual property rights including patent rights, copyrights, and trade secrets of Digital Voice Systems, Inc. llNote: this applies to SiriusXM® Radio receivers only and not SiriusXM Ready devices. NOTE llAbout SiriusXM Trial Subscription ABOUT The SiriusXM Platinum Plan is the ultimate entertainment experience, featuring expertly curated ad-free music and exclusive artist created music channels, premium sports coverage with live play-by-play from every major sport, and sports talk including all of our official league and college conference channels. It also includes exclusive comedy, talk and news. Discover even more when you stream on the SXM App, with Xtra music channels for any mood or activity, podcasts including SiriusXM originals, all included with your trial. SiriusXM also delivers a wide variety of services such as Traffic, Weather, Sports Scores, Movie Listings, Fuel Prices, Stock Prices to navigation equipped vehicles. For a list of available features in your vehicle, visit siriusxm.com/infotainment and get the most out of your driving experience. RADIO OPERATION Look for the Sirius, XM, SXM, Band, SAT, AUX, Radio or Source button and you’re in. If you can’t hear us, it’s easy to get started: • Locate your Radio ID/ESN by turning to Channel 0. If you don’t see your number there, go to Siriusxm.com/activationhelp to find it. • Visit siriusxm.com/refresh or call 1-855-MYREFRESH (697-3373) to send a refresh signal to your radio. Canadian Customers: • Locate your Radio ID/ESN by turning to Channel 0. • Visit siriusxm.ca/refresh to send a refresh signal to your radio or call 1-888-539-7474 for service. RADIO OPERATION 162 DISPLAYING THE RADIO ID Each SiriusXM tuner is identified with a unique radio ID which is 8 alphanumeric characters. The radio ID is required when activating your SiriusXM radio or when reporting a problem. 1. Select . 2. → Contact SiriusXM (Contact SiriusXM) 3. Your radio ID will be displayed. PRESETTING A CHANNEL Multiple stations can be registered as presets. 1. Tune to the desired channel. 2. Select and hold one of the desired preset station buttons. ●● To change the preset station to a different one, follow the same procedure. SEARCHING FOR A CURRENT CONTENT A currently aired program can be searched for by keyword(s), such as channel number, category, team name, etc., using either voice recognition or on screen. To enable search, display the search screen. Select the desired content from the search results list displayed. MICROPHONE ●●User’s speech is recognized by a built-in microphone. NOTE llWait for the confirmation beep before speaking a command. RADIO OPERATION 163 Audio 6 NOTE llVoice commands may not be recognized if: • Spoken too quickly. • Spoken at a low or high volume. • Driving with a window open. • Passengers are talking while voice commands are spoken. • The air conditioning speed is set high. • The current position is outside the communication area. • When air from the ventilator blows directly toward the microphone. llIf there is excessive background noise, such as wind noise, the system may not recognize the command properly and using voice commands may not be possible. SEARCHING FOR THE DESIRED CONTENT 1. Speak when the search screen is displayed and a beep is heard. ●●Displays the status of voice recognition, searching, etc. with a microphone icon or text message. ●● / : Select to display keypad/keyboard to enter text for search. ●● Touch the microphone icon to refresh speech recognition. RADIO OPERATION 164 MEDIA OPERATION CD (IF EQUIPPED WITH A CD PLAYER) OVERVIEW The CD control screen can be accessed with the following methods: ●● Insert a disc. (→P.69) ●● Select CD (CD) on the media control screen. (→P.147) XXControl panel Turn to adjust the volume. Press to mute the audio system. Press and hold to turn the audio system off, and press and hold to turn it on again. Turn to change the track. Press and hold to display the sound customization screen. (→P.149) XXControl screen XX11.6-inch display system/11.6-inch display with Navi system XXDual 7.0-inch display system MEDIA OPERATION 165 Audio 6 Select to switch between other media sources. Displays cover art. Select to display the sound customization screen. (→P.149) Shows progress. The playback location can be changed by dragging the sliders. Select to change the track. Select and hold to fast forward/rewind. Select to pause/play. Select to display the track search screen. Playback categories, such as by Artists (Artists) or Albums (Albums), can be selected. Audio CDs: Changes between repeat all tracks → repeat current track → cancel repeat each time this button is selected. MP3/WMA/AAC discs: Changes between repeat current album/folder → repeat current track → cancel repeat each time this button is selected. Select to enable/disable random playback for the tracks currently playing on the CD. NOTE llIf a disc contains CD-DA files and MP3/WMA/AAC files, only the CDDA files can be played back. llIf a CD-TEXT disc is inserted, the title of the disc and track will be displayed. llDepending on the disc or music file being played, the cover art may not be displayed. MEDIA OPERATION 166 USB MEMORY Audio files on a USB memory device can be played back. OVERVIEW The USB Audio playback screen can be accessed with the following methods: ●●Connect a USB memory device. (→P.70) ●● Select USB (USB) on the media control screen. (→P.147) XXControl panel Turn to adjust the volume. Press to mute the audio system. Press and hold to turn the audio system off, and press and hold to turn it on again. Turn to change the track. Press and hold to display the sound customization screen. (→P.149) XXControl screen XX11.6-inch display system/11.6-inch display with Navi system XXDual 7.0-inch display system MEDIA OPERATION 167 Audio 6 Select to switch between other media sources. Displays cover art. Select to display the sound customization screen. (→P.149) Shows progress. The playback location can be changed by dragging the sliders. Select to change the track. Select and hold to fast forward/rewind. Select to pause/play. Select to display the track search screen. Playback categories, such as by Artists (Artists) or Albums (Albums), can be selected. Changes between repeat all tracks* → repeat current album/folder → repeat current track → cancel repeat each time this button is selected. Select to enable/disable random playback for the tracks currently playing from the USB memory device. *: Operable when Folders (Folders) is selected from (Browse) WARNING llDo not operate the player’s controls or connect the USB memory device while driving. CAUTION llDo not leave your portable player in the vehicle. In particular, high temperatures inside the vehicle may damage the portable player. llDo not push down on or apply unnecessary pressure to the portable player while it is connected as this may damage the portable player or its terminal. llDo not insert foreign objects into the port as this may damage the portable player or its terminal. NOTE llDepending on the device or music file being played, the cover art may not be displayed. MEDIA OPERATION 168 iPod/iPhone When an iPod/iPhone is connected to the USB port, you can play iPod/iPhone music files. On this unit, you can perform operations such as selecting a file from a list or changing to the random playback mode. CONNECTING THE iPod/iPhone XX11.6-inch display system/11.6-inch display with Navi system 1. Connect an iPod/iPhone to the USB port. (→P.70) ●●When Apple CarPlay is started, disable Apple CarPlay on the “Manage Devices” screen. (→P.87) XXDual 7.0-inch display system 1. Connect an iPod/iPhone to the USB port. (→P.70) 2. Check the confirmation message, and then select No (No). ●● If “Don’t show again.” is selected, the confirmation message will not be displayed again. If the connected iPhone is recognized as an Apple CarPlay device, select the device from the Apple CarPlay device list to disable the device. (→P.132) OVERVIEW Select iPod/iPhone (iPod/iPhone) on the media control screen. (→P.147) XXControl panel Turn to adjust the volume. Press to mute the audio system. Press and hold to turn the audio system off, and press and hold to turn it on again. Turn to change the track. Press and hold to display the sound customization screen. (→P.149) MEDIA OPERATION 169 Audio 6 XXControl screen XX11.6-inch display system/11.6-inch display with Navi system XXDual 7.0-inch display system Select to switch between other media sources. Displays cover art. Select to display the sound customization screen. (→P.149) Shows progress. The playback location can be changed by dragging the sliders. Select to change the track. Select and hold to fast forward/rewind. Select to pause/play. Select to display the track search screen. Playback categories, such as by Artists (Artists) or Albums (Albums), can be selected. Changes between repeat current album → repeat current track → cancel repeat each time this button is selected. Select to enable/disable random playback for the tracks currently playing on the iPod/iPhone. * Select to fast forward the current content item in fixed intervals. * Select to rewind the current content item in fixed intervals. *: Display when playing Audiobooks or Podcasts MEDIA OPERATION 170 WARNING llDo not operate the player’s controls or connect the iPod/iPhone while driving. CAUTION llDo not leave your iPod/iPhone in the vehicle. In particular, high temperatures inside the vehicle may damage it. llDo not push down on or apply unnecessary pressure to the connector area of the iPod/iPhone while it is connected as this may damage the device or its terminals. llDo not insert foreign objects into the port as this may damage the device or its terminals. NOTE llWhen an iPod/iPhone is connected using an undamaged genuine iPod/iPhone cable, battery of the iPod/iPhone will be charged. llWhen playing music on an iPod/iPhone, operate connect it to the system using an undamaged genuine iPod/iPhone cable and operate the iPod/iPhone from the system. Certain functions may not be available if connected using other methods. Furthermore, depending on the connected iPod/iPhone, certain functions may not be available. llDepending on the iPod/iPhone or music file being played, the cover art may not be displayed. llWhen an iPod/iPhone is connected and the audio source is changed to iPod/iPhone mode, the iPod/iPhone will resume playing from the same point it was last used. llTracks selected by operating a connected iPod/iPhone may not be recognized or displayed properly. MEDIA OPERATION 171 Audio 6 Bluetooth AUDIO The Bluetooth audio system enables users to play music files stored on Bluetooth devices through the vehicle speakers via wireless communication. This audio system supports Bluetooth, a wireless data system capable of playing portable audio music without cables. If your device does not support Bluetooth, the Bluetooth audio system will not function. OVERVIEW The Bluetooth audio control screen can be accessed by selecting Bluetooth (Bluetooth) on the media control screen. (→P.147) Depending on the type of portable player connected, some functions may not be available and/or the screen may look differently than shown in this manual. XXControl panel Turn to adjust the volume. Press to mute the audio system. Press and hold to turn the audio system off, and press and hold to turn it on again. Turn to change the track. Press and hold to display the sound customization screen. (→P.149) MEDIA OPERATION 172 XXControl screen XX11.6-inch display system/11.6-inch display with Navi system XXDual 7.0-inch display system Select to switch between other media sources. Displays cover art. Select to display the sound customization screen. (→P.149) Shows progress. Select to display the “Manage Devices” screen. (→P.175) Select to change the track. Select and hold to fast forward/rewind. Select to pause/play. Select to display the track search screen. Playback categories, such as by Artists (Artists) or Albums (Albums), can be selected. Changes between repeat current album/folder → repeat current track → cancel repeat each time this button is selected. Select to enable/disable random playback for the tracks currently playing on the Bluetooth device. MEDIA OPERATION 173 Audio 6 WARNING llDo not operate the player’s controls or connect to the Bluetooth audio system while driving. llThis system is fitted with Bluetooth antennas. People with implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverter defibrillators should maintain a reasonable distance between themselves and the Bluetooth antennas. The radio waves may affect the operation of such devices. llBefore using Bluetooth devices, users of any electrical medical device other than implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverter defibrillators should consult the manufacturer of the device for information about its operation under the influence of radio waves. Radio waves could have unexpected effects on the operation of such medical devices. CAUTION llDo not leave your portable player in the vehicle. In particular, high temperatures inside the vehicle may damage the portable player. NOTE llDepending on the Bluetooth device that is connected to the system, the music may start playing when selecting while it is paused. Conversely, the music may pause when selecting while it is playing. llIn the following conditions, the system may not function: • The Bluetooth device is turned off. • The Bluetooth device is not connected. • The Bluetooth device has a low battery. llIt may take time to connect the phone when Bluetooth audio is being played. llFor operating the portable player, see the instruction manual that comes with it. llIf the Bluetooth device is disconnected due to poor reception from the Bluetooth network when the ignition switch is turned to the “ACC” or “ON” position, the system will automatically reconnect to the portable player. llIf the Bluetooth device is disconnected on purpose, such as it was turned off, this does not happen. Reconnect the portable player manually. llBluetooth device information is registered when the Bluetooth device is connected to the Bluetooth audio system. When transferring ownership of your vehicle, remove the Bluetooth audio information from the system. (→P.94) llDepending on the Bluetooth device or music file being played, the cover art may not be displayed. llIf the Bluetooth device does not play automatically when connected, device operation may be necessary. llOperability of all Bluetooth devices with this system is not guaranteed. MEDIA OPERATION 174 NOTE llDepending on the Bluetooth device connected, irregularities, such as disabled operation of the audio system, inconsistent display with the connected device, longer time required for audio playback, may result. llDepending on the music playback application of a Bluetooth device, the Bluetooth audio may not operate properly. llIf the specifications or profile of the connected Bluetooth device is lower than recommended or not compatible, the Bluetooth device may not function properly. llIf a Bluetooth device is enclosed by metal object or in a remote area away from the vehicle’s Bluetooth module, sound quality of the playback may be deteriorated or the wireless communication may be severed. CONNECTING A Bluetooth DEVICE To use the Bluetooth audio system, it is necessary to register a Bluetooth device with the system. XXRegistering an additional device 1. Select Manage Devices (Manage Devices) on the Bluetooth audio control screen. 2. For more information: →P.84 XXSelecting a registered device 1. Select Manage Devices (Manage Devices) on the Bluetooth audio control screen. 2. Select the Bluetooth device to be connected. MEDIA OPERATION 175 Audio 6 AUX OVERVIEW The AUX control screen can be accessed with the following methods: ●●Connect a portable audio device. (→P.70) ●● Select AUX (AUX) on the media control screen. (→P.147) XXControl panel Turn to adjust the volume. Press to mute the audio system. Press and hold to turn the audio system off, and press and hold to turn it on again. Press and hold to display the sound customization screen. (→P.149) XXControl screen XX11.6-inch display system/11.6-inch display with Navi system XXDual 7.0-inch display system MEDIA OPERATION 176 Select to switch between other media sources. Select to display the sound customization screen. (→P.149) WARNING llDo not operate the player’s controls or connect the portable audio device while driving. CAUTION llDo not leave portable audio device in the vehicle. The temperature inside the vehicle may become high, resulting in damage to the player. llDo not push down on or apply unnecessary pressure to the portable audio device while it is connected as this may damage the portable audio device or its terminal. llDo not insert foreign objects into the port as this may damage the portable audio device or its terminal. Apple CarPlay* *: When connected as an Apple CarPlay device Audio files on an Apple CarPlay device can be played back. CONNECTING AN Apple CarPlay DEVICE XX11.6-inch display system/11.6-inch display with Navi system 1. Connect a device compatible with Apple CarPlay. (→P.87) 2. Check the confirmation message, and then select Yes (Yes). ●● The Apple CarPlay screen will be displayed. ●● If No (No) is selected, Apple CarPlay will not start. When connected to a USB port, the device will be recognized as an iPod/iPhone. (→P.169) When not connected to a USB port, the device will be recognized as a Bluetooth device. (→P.172) XXDual 7.0-inch display system 1. Connect a device compatible with Apple CarPlay. (→P.70) 2. Check the confirmation message, and then select Yes (Yes). ●● The Apple CarPlay screen will be displayed. ●● If No (No) is selected, Apple CarPlay will not start, and the device will be recognized as an iPod/iPhone. (→P.169) MEDIA OPERATION 177 Audio 6 ●● If “Don’t show again.” is selected, the confirmation message will not be displayed again. If the connected iPhone is not recognized as an Apple CarPlay device, select the device from the Apple CarPlay device list to enable the device. (→P.132) NOTE llUse an undamaged genuine USB cable when using this function. (Dual 7.0-inch display system only) llEnable Apple CarPlay in the Apple CarPlay device’s restriction settings before using this function. OVERVIEW Select Apple CarPlay (Apple CarPlay) on the media control screen. (→P.147) XXControl panel Turn to adjust the volume. Press to mute the audio system. Press and hold to turn the audio system off, and press and hold to turn it on again. Turn to change the track. Press and hold to display the sound customization screen. (→P.149) XXControl screen XX11.6-inch display system/11.6-inch display with Navi system XXDual 7.0-inch display system MEDIA OPERATION 178 Select to switch between other media sources. Displays cover art. Select to display the sound customization screen. (→P.149) Shows progress. Select to change the track. Select and hold to fast forward/rewind. Select to pause/play. WARNING llDo not operate or connect an Apple CarPlay device while driving. llThis system is fitted with Wi-Fi® antennas. People with implantable cardiac pacemakers, cardiac resynchronization therapypacemakers or implantable cardioverter defibrillators should maintain a reasonable distance between themselves and the Wi-Fi® antennas. The radio waves may affect the operation of such devices. llBefore using Wi-Fi® devices, users of any electrical medical device other than implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverter defibrillators should consult the manufacturer of the device for information about its operation under the influence of radio waves. Radio waves could have unexpected effects on the operation of such medical devices. CAUTION llDo not leave your Apple CarPlay device in the vehicle. In particular, high temperatures inside the vehicle may damage it. llDo not push down on or apply unnecessary pressure to the connector area of the Apple CarPlay device while it is connected as this may damage the device or its terminals. llDo not insert foreign objects into the port as this may damage the device or its terminals. NOTE llWhen an Apple CarPlay device is connected using an undamaged genuine Apple CarPlay device cable, battery of the Apple CarPlay device will be charged. llWhen playing music on an Apple CarPlay device, operate the Apple CarPlay device from the system. Furthermore, depending on the connected Apple CarPlay device, certain functions may not be available. llDepending on the Apple CarPlay device or music file being played, the cover art may not be displayed. llWhen an Apple CarPlay device is connected and the audio source is changed to Apple CarPlay device mode, the Apple CarPlay device will resume playing from the same point it was last used. llTracks selected by operating a connected Apple CarPlay device may not be recognized or displayed properly. MEDIA OPERATION 179 Audio 6 Android Auto* *: When connected as an Android Auto device Audio files on an Android Auto device can be played back. CONNECTING AN Android Auto DEVICE XX11.6-inch display system/11.6-inch display with Navi system The Android Auto application can be used in either of the following methods: ●●Register a device compatible with Android Auto to the vehicle system then connect it wirelessly. (→P.134) ●●Connect a device compatible with Android Auto to a USB port. (→P.134) XXDual 7.0-inch display system To use the Android Auto application, connect your Android Auto device to the USB port. (→P.134) ●● If “Don’t show again.” is selected, the confirmation message will not be displayed again. If the connected Android Auto device is not recognized as an Android Auto device, select the check box for the device on the Android Auto device list. (→P.136) OVERVIEW Select Android Auto (Android Auto) on the media control screen. (→P.147) XXControl panel Turn to adjust the volume. Press to mute the audio system. Press and hold to turn the audio system off, and press and hold to turn it on again. Turn to change the track. Press and hold to display the sound customization screen. (→P.149) MEDIA OPERATION 180 XXControl screen XX11.6-inch display system/11.6-inch display with Navi system XXDual 7.0-inch display system Select to switch between other media sources. Displays cover art. Select to display the sound customization screen. (→P.149) Shows progress. Select to change the track. Select to pause/play. MEDIA OPERATION 181 Audio 6 WARNING llDo not operate or connect an Android Auto device while driving. llThis system is fitted with Wi-Fi® antennas. People with implantable cardiac pacemakers, cardiac resynchronization therapypacemakers or implantable cardioverter defibrillators should maintain a reasonable distance between themselves and the Wi-Fi® antennas. The radio waves may affect the operation of such devices. llBefore using Wi-Fi® devices, users of any electrical medical device other than implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverter defibrillators should consult the manufacturer of the device for information about its operation under the influence of radio waves. Radio waves could have unexpected effects on the operation of such medical devices. CAUTION llDo not leave your Android Auto device in the vehicle. In particular, high temperatures inside the vehicle may damage it. llDo not push down on or apply unnecessary pressure to the connector area of the Android Auto device while it is connected as this may damage the device or its terminals. llDo not insert foreign objects into the port as this may damage the device or its terminals. NOTE llDepending on the device or music file being played, the cover art may not be displayed. MEDIA OPERATION 182 AUDIO REMOTE CONTROLS STEERING WHEEL CONTROLS Some parts of the audio system can be controlled using the steering wheel controls. “VOL +/VOL -” switch “ / ” switch “Source” switch “ / ” switch XX“VOL +/VOL -” switch Mode Operation Function Volume Press Volume up/down Press and hold Volume up/down continuously XX“ / ” switch Mode Operation Function AM/FM Radio, SiriusXM® Press Preset station/channel up/ down Press and hold Scan and stop at the first received station when the switch is released Audio CD*, MP3/WMA/ AAC disc*, USB, iPod/iPhone, Bluetooth audio, Apple CarPlay Press Change a track/file Press and hold Fast forward/rewind Android Auto Press Change a track *: If equipped with a CD player AUDIO REMOTE CONTROLS 183 Audio 6 XX“Source” switch Mode Operation Function All Press Turn on the audio system or change the audio source mode Press and hold Turn off the audio system XX“ / ” switch Mode Operation Function All Press Audio volume mute on/off. AUDIO REMOTE CONTROLS 184 TIPS FOR OPERATING THE AUDIO SYSTEM OPERATING INFORMATION CAUTION llTo avoid damage to the audio system: • Be careful not to spill beverages over the audio system. • Do not put anything other than an appropriate disc into the disc slot.* *: If equipped with a CD player NOTE llThe use of a cellular phone inside or near the vehicle may cause a noise from the speakers of the audio system which you are listening to. However, this does not indicate a malfunction. RADIO Usually, a problem with radio reception does not mean there is a problem with the radio — it is just the normal result of conditions outside the vehicle. For example, nearby buildings and terrain can interfere with FM reception. Power lines or phone wires can interfere with AM signals. And of course, radio signals have a limited range. The farther the vehicle is from a station, the weaker its signal will be. In addition, reception conditions change constantly as the vehicle moves. Here, some common reception problems that probably do not indicate a problem with the radio are described. TIPS FOR OPERATING THE AUDIO SYSTEM 185 Audio 6 FM Fading and drifting stations: Generally, the effective range of FM is about 25 miles (40 km). Once outside this range, you may notice fading and drifting, which increase with the distance from the radio transmitter. They are often accompanied by distortion. Multi-path: FM signals are reflective, making it possible for 2 signals to reach the vehicle’s antenna at the same time. If this happens, the signals will cancel each other out, causing a momentary flutter or loss of reception. Static and fluttering: These occur when signals are blocked by buildings, trees or other large objects. Increasing the bass level may reduce static and fluttering. Station swapping: If the FM signal being listened to is interrupted or weakened, and there is another strong station nearby on the FM band, the radio may tune in the second station until the original signal can be picked up again. AM Fading: AM broadcasts are reflected by the upper atmosphere — especially at night. These reflected signals can interfere with those received directly from the radio station, causing the radio station to sound alternately strong and weak. Station interference: When a reflected signal and a signal received directly from a radio station are very nearly the same frequency, they can interfere with each other, making it difficult to hear the broadcast. Static: AM is easily affected by external sources of electrical noise, such as high tension power lines, lightening or electrical motors. This results in static. SiriusXM® ●●Cargo loaded on the roof luggage carrier, especially metal objects, may adversely affect the reception of SiriusXM® Radio. ●●Alternation or modifications carried out without appropriate authorization may invalidate the user’s right to operate the equipment. TIPS FOR OPERATING THE AUDIO SYSTEM 186 CD PLAYER AND DISC (IF EQUIPPED WITH A CD PLAYER) ●● Extremely high temperatures can keep the CD player from working. On hot days, use the air conditioning system to cool the inside of the vehicle before using the player. ●●Bumpy roads or other vibrations may make the CD player skip. ●● If moisture gets into the CD player, the discs may not be able to be played. Remove the discs from the player and wait until it dries. WARNING llCD players use an invisible laser beam which could cause hazardous radiation exposure if directed outside the unit. Be sure to operate the player correctly. Audio CDs ●●Use only discs marked as shown above. ●● This CD player is intended for use with 4.7 in. (12 cm) discs only. ●● The following products may not be playable on your player: • SACD • dts CD • Copy-protected CD • Video CD TIPS FOR OPERATING THE AUDIO SYSTEM 187 Audio 6 XXSpecial shaped discs XXTransparent/translucent discs XXLow quality discs XXLabeled discs TIPS FOR OPERATING THE AUDIO SYSTEM 188 CAUTION llDo not use special shaped, transparent/translucent, low quality or labeled discs such as those shown in the illustrations. The use of such discs may damage the player, or it may be impossible to eject the disc. llThis system is not designed for use of Dual Discs. Do not use Dual Discs because they may cause damage to the player. llDo not use discs with a protection ring. The use of such discs may damage the player, or it may be impossible to eject the disc. llDo not use printable discs. The use of such discs may damage the player, or it may be impossible to eject the disc. Correct Wrong ●●Handle discs carefully, especially when inserting them. Hold them on the edge and do not bend them. Avoid getting fingerprints on them, particularly on the shiny side. ●●Dirt, scratches, warping, pin holes or other disc damage could cause the player to skip or to repeat a section of a track. (To see a pin hole, hold the disc up to the light.) ●●Remove discs from the players when not in use. Store them in their plastic cases away from moisture, heat and direct sunlight. To clean a disc: Wipe it with a soft, lint-free cloth that has been dampened with water. Wipe in a straight line from the center to the edge of the disc (not in circles). Dry it with another soft, lint-free cloth. Do not use a conventional record cleaner or antistatic device. TIPS FOR OPERATING THE AUDIO SYSTEM 189 Audio 6 CD-R/RW DISCS ●●CD-R/CD-RW discs that have not been subject to the “finalizing process” (a process that allows discs to be played on a conventional CD player) cannot be played. ●● It may not be possible to play CD-R/CD-RW discs recorded on a music CD recorder or a personal computer because of disc characteristics, scratches or dirt on the disc, or dirt, condensation, etc. on the lens of the unit. ●● It may not be possible to play discs recorded on a personal computer depending on the application settings and the environment. Record with the correct format. (For details, contact the appropriate application manufacturers of the applications.) ●●CD-R/CD-RW discs may be damaged by direct exposure to sunlight, high temperatures or other storage conditions. The unit may be unable to play some damaged discs. ●● If you insert a CD-RW disc into the player, playback will begin more slowly than with a conventional CD or CD-R disc. ●●Recordings on CD-R/CD-RW cannot be played using the DDCD (Double Density CD) system. USB MEMORY DEVICE ●●USB communication formats: USB 2.0 LS (1.5 Mbps)/FS (12 Mbps)/HS (480 Mbps) ●● File formats: FAT32/NTFS/HFS+/EXT4 ●●Correspondence class: Mass storage class iPod/iPhone The following iPod touch and iPhone devices can be used with this system. Made for ●● iPhone 12 Pro Max ●● iPhone 12 Pro ●● iPhone 12 ●● iPhone 12 mini ●● iPhone 11 Pro Max ●● iPhone 11 Pro ●● iPhone 11 ●● iPhone XS Max ●● iPhone XS ●● iPhone XR ●● iPhone X ●● iPhone 8 Plus ●● iPhone 8 ●● iPhone 7 Plus ●● iPhone 7 TIPS FOR OPERATING THE AUDIO SYSTEM 190 ●● iPhone SE ●● iPhone 6s Plus ●● iPhone 6s ●● iPhone 6 Plus ●● iPhone 6 ●● iPod touch (7th generation) ●● iPod touch (6th generation) ●● For USA customers, please visit www.subaru.com for details. Outside of the USA customers, contact your local dealer to arrange a demonstration in order to confirm whether or not the phone can be paired with the vehicle. FILE INFORMATION Codec Description Channels Container/ Extension MPEG-4 AAC LC 8-48 kHz sampling rate 8-320 kbps CBR, VBR Mono and stereo .m4a, .aac MPEG-4 HE AAC 16-48 kHz sampling rate 8-320 kbps CBR, VBR Mono and stereo .m4a, .aac MPEG-4 HE AAC v2 16-48 kHz sampling rate 8-320 kbps CBR, VBR Mono and stereo .m4a, .aac MP3 8-48 kHz sampling rate 8-320 kbps CBR, VBR Mono, Stereo, and Joint .mp3 WMA2/7/8/ 9/9.1/9.2 16-48 kHz sampling rate 8-320 kbps CBR, VBR Mono and stereo .wma Codec Description Channels Container/ Extension PCMWAVE 8 bit and 16 bit 8000, 16000, and 44100 Hz sampling frequency Mono and stereo .wav FLAC 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz sampling rate 16 bit, 24 bit Mono and stereo .flac ALAC 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz sampling rate 16 bit, 24 bit Mono and stereo .m4a ●● The player is compatible with VBR (Variable Bit Rate). ●●MP3 (MPEG Audio Layer 3), WMA (Windows Media Audio) and AAC (Advanced Audio Coding) are audio compression standards. ●● This system can play AAC/AAC+ v2/MP3/WMA files on CD-R*, CD-RW discs*, USB memory device, and Bluetooth device. *: If equipped with a CD player ●● This system can play disc recordings compatible with ISO 9660 level 1 and level 2 and with the Romeo and Joliet file system.* *: If equipped with a CD player ●●When naming an AAC/AAC+ v2/MP3/WMA file, add an appropriate file extension (.mp3/.wma/.m4a). TIPS FOR OPERATING THE AUDIO SYSTEM 191 Audio 6 ●● This system plays back files with .mp3/.wma/.m4a file extensions as AAC/AAC+ v2/MP3/WMA files respectively. To prevent noise and playback errors, use the appropriate file extension. ●● This system can play only the first session when using multi-session compatible CDs.* *: If equipped with a CD player ●●MP3 files are compatible with the ID3 Tag Ver. 1.0, Ver. 1.1, Ver. 2.2 and Ver. 2.3 formats. This system cannot display disc title* (folder name), track title* (file name) and artist name in other formats. *: If equipped with a CD player ●●WMA/AAC files can contain a WMA/AAC tag that is used in the same way as an ID3 tag. WMA/AAC tags carry information such as track title* (file name) and artist name. *: If equipped with a CD player ●● This system can play back AAC files encoded by iTunes. ●● The sound quality of MP3/WMA files generally improves with higher bit rates. In order to achieve a reasonable level of sound quality, discs* (USB memory device) recorded with a bit rate of at least 128 kbps are recommended. *: If equipped with a CD player ●● The MP3/WMA player does not play back MP3/WMA files from discs recorded using packet write data transfer (UDF format). Discs should be recorded using “pre-mastering” software rather than packet-write software.* *: If equipped with a CD player ●●MP3i (MP3 interactive) and MP3PRO formats are not compatible with the audio device. ●●When playing back files recorded as VBR (Variable Bit Rate) files, the play time will not be correctly displayed if the fast forward or rewind operations are used. ●● It is not possible to check folders that do not include AAC/AAC+ v2/MP3/WMA files. ●●AAC/AAC+ v2/MP3/WMA files in folders up to 3 levels deep can be played. However, the start of playback may be delayed when using discs* (USB memory device) containing numerous levels of folders. For this reason, we recommend creating discs* (USB memory device) with no more than 2 levels of folders. *: If equipped with a CD player 001.mp3 002.wma Folder 1 003.mp3 Folder 2 004.mp3 005.wma Folder 3 006.m4a ●● The play order may change depending on the personal computer and AAC/AAC+ v2/MP3/WMA encoding software that were used. TIPS FOR OPERATING THE AUDIO SYSTEM 192 ●●WMA (Windows Media Audio) is an audio compression format developed by Microsoft®. It compresses files into a size smaller than that of MP3 files. The decoding formats for WMA files are Ver. 7, 8 and 9. This product is protected by certain intellectual property rights of Microsoft Corporation and third parties. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary and third parties. ●●MP3 is an audio compression standard determined by a working group (MPEG) of the ISO (International Standard Organization). MP3 compresses audio data to about 1/10 the size of that on conventional discs. TIPS FOR OPERATING THE AUDIO SYSTEM 193 Audio 6 MEMO 194 195 Navigation System (11.6-inch with Navi system only) Navigation System (If equipped) Basic Operation 196 Map Screen ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 196 Map Screen Overview ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 196 Map Screen Buttons Overview ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 197 Map Screen Operation ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 197 Current Position Display žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 197 Map Scale ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 198 Location Menu Pop-up ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 198 Orientation Of The Map ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 199 Map Screen Information ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 201 Gas Station/Parking Lot/Rest Area Icons ž ž ž ž ž ž ž ž ž 201 Traffic Information žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 201 Other Information žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 202 Main Menu Screen žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 203 Main Menu Screen Overview ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 203 Search Screen žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 205 Favorites Screen ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 207 Edit List Screen žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 210 Route Calculation ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 210 Route Calculation Screen žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 210 Route Guidance 212 Route Guidance žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 212 Route Guidance Screen žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 212 Current Route Screen žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 215 Standard Map Icon žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 217 Typical Voice Guidance Prompts ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 218 Setup 219 Navigation Settings žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 219 Navigation Settings Screen ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 219 Tips For The Navigation System 221 GPS (Global Positioning System) žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 221 Regarding Errors In Current Position Display žž ž ž 221 Limitations Of The Navigation System žž ž ž ž ž ž ž ž ž ž ž 221 Map Data žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 223 Regarding Roads And Place Name Data žž ž ž ž ž ž ž ž ž 223 SUBARU Map Update žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 223 Updating The Map Data Manually Using A USB Memory Device ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 224 Updating The Map Data Manually Using Wi-Fi® ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 225 Updating The Map Data Automatically Using Wi-Fi® ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 226 BASIC OPERATION MAP SCREEN MAP SCREEN OVERVIEW The map screen can be displayed using the following method: 1. Select . 2. Select (Map). Select to display the search screen. (→P.205) Select to increase the size of the map screen. Select to reduce the size of the map screen. Displays the current vehicle position. Select to display the following pop-up: • Add to Favorites (Add to Favorites): Select to register your current location as a favorite. • Avoid Blocked Road (Avoid Blocked Road)*: Select to display the alternate route screen and search for 3 additional routes to the selected destination. (→P.210) • Current Location (Current Location): Select to display the current position information. Displays the speed limit for the road currently being traveled on. Displays the current street name. Select to display the main menu screen. (→P.203) Select to set a voice guidance. • : Enables voice guidance • : Enables the voice guidance of alerts only • : Disables voice guidance BASIC OPERATION 196 Select to change the map display mode between 2D north-up, 2D heading-up, or 3D heading-up. (→P.199) *: This item can only be displayed when a route is set. MAP SCREEN BUTTONS OVERVIEW The map screen buttons can be accessed by selecting any point on the map. Select to change the scale of the map screen. (→P.198) MAP SCREEN OPERATION CURRENT POSITION DISPLAY After moving the map, Re-center (Re-center) may be displayed. Select Re-center (Re-center) to return the map to the current position. NOTE llWhile driving, the current position mark is fixed on the screen and the map moves. llThe current position is automatically set as the vehicle receives signals from the GPS (Global Positioning System). If the current position is not correct, it is automatically corrected after the vehicle receives signals from the GPS. llIf the battery has been disconnected or when the vehicle is new, the current position may not be correct. As soon as the system receives signals from the GPS, the correct current position will be displayed. llAfter moving the map, if it is not moved for a certain amount of time, it will automatically return to the current position. BASIC OPERATION 197 Navigation System 7 MAP SCALE 1. Select any point on the map. 2. Select or to change the scale of the map screen. ●●When the automatic zoom function is on (→P.219) during route guidance, the map is zoomed in automatically when approaching intersections or turning points. NOTE llThe scale of the map screen can also be changed with the double touch or pinch operation. (→P.71) llIf the map scale has been changed after moving the map, the map scale will return to previous scale when the map is returned to the current position. llThe automatic zoom function may not operate if the map scale is adjusted manually during route guidance. To reenable the automatic zoom function, change the orientation of the map screen. (→P.199) LOCATION MENU POP-UP The location menu pop-up can be displayed using the following methods: ●● Select and hold any point on the map. ●● Select a point from a list. ●● Select a POI icon. Select Go (Go) to search for a route to the selected point and display the route calculation screen. (→P.210) During a route guidance, selecting Add Stop (Add Stop) will add a waypoint. BASIC OPERATION 198 Select to display the following options. Add to Favorites (Add to Favorites) Select to register the selected point as a favorite. Go (Go) Select to search for a route to the selected point and display the route calculation screen. (→P.210) Search Near Here (Search Near Here) Select to display the search screen and search near the selected point. (→P.205) More Information (More Information) Select to display detailed information about the selected point or POI. : Select to call the registered phone number of POI. : Select to search for a route to the selected point or POI and display the route calculation screen. (→P.210) Edit Location (Edit Location) Select to edit the point registered as home/work. Remove Location (Remove Location) Select to erase the point registered as home/work. (Rename) Select to change the name of a registered favorite. ORIENTATION OF THE MAP The orientation of the map can be changed between 2D northup, 2D heading-up, and 3D heading-up. 1. Select , ,or . ●● Each time the symbol is selected, the orientation of the map changes. XX2D north-up ●●Regardless of the direction of vehicle travel, north is always up. BASIC OPERATION 199 Navigation System 7 XX3D heading-up ●● The direction of vehicle travel is always up. XX2D heading-up ●● The direction of vehicle travel is always up. BASIC OPERATION 200 MAP SCREEN INFORMATION GAS STATION/PARKING LOT/REST AREA ICONS Gas stations, parking lots and rest areas can be displayed on the route. Their location can also be set as a destination. ●● The display of gas station/parking lots/rest area icons can be turned on/off. (→P.219) TRAFFIC INFORMATION* *: Use of this function may not be possible depending on country and vehicle. Road sections affected by traffic conditions are displayed in a different color on the map, and a small icon representing the type of traffic condition is displayed above the road. This feature is available at certain map scales. To receive the data service information in the vehicle, a subscription to the SiriusXM® Radio Service is necessary following a free trial. (→P.161) BASIC OPERATION 201 Navigation System 7 OTHER INFORMATION A pop-up screen will be displayed based on the driving situation, etc. XXLow fuel warning When the fuel level is low, a warning message will pop up on the screen. ●● (Search): Select to search for gas stations. ●● (Ignore): Select to delete the message. XXPeriodic rest notification If the system determines, based on the driver’s condition, that a rest may be necessary, a pop-up message will be displayed on the screen. ●● (Search): Select to search for rest areas. ●● (Ignore): Select to delete the message. ●●Pop-up screens can be turned on/off using the “Periodic Rest Notification” setting on the general settings screen. (→P.94) BASIC OPERATION 202 MAIN MENU SCREEN MAIN MENU SCREEN OVERVIEW The main menu screen can be displayed using the following method: 1. Display the map screen. (→P.196) 2. Select Menu (Menu). (Search) Select to display the search screen. (→P.205) (Add Home)*1/ Drive Home (Drive Home)*2 (Add Home): Select to register a point as home. (→P.209) Drive Home (Drive Home): Select to set the point registered as home as the destination. (Add Work)*3/ Drive to Work (Drive to Work)*4 (Add Work): Select to register a point as work. (→P.209) Drive to Work (Drive to Work): Select to set the point registered as work as the destination. Recent Destinations (Recent Destinations) Select to display a list of recently set destinations. Then select a point from the list. Location menu pop-up for the point will be displayed on the map screen. (→P.198) • Edit List (Edit List): Select to display the edit list screen. (→P.210) Favorites (Favorites) Select to display the favorite screen. (→P.207) BASIC OPERATION 203 Navigation System 7 My Routes (My Routes)*5 Select to name the current route and register it so that it can be used repeatedly. (→P.215) My route name: Select a registered route to display the route calculation screen. (→P.210) Edit List (Edit List): Select to display the edit list screen. (→P.210) Maps (Maps) Select to display the map update screen. (→P.225) Legal Information (Legal Information) Select to display the legal information screen. Settings (Settings) Selecrt to display the navigation settings screen. (→P.219) Privacy (Privacy) To display frequently set destinations, select “Keep trip history on this device for optional features” and “Predict frequent destinations” to on then select Frequent destinations (Frequent destinations). *1: If a point has not been registered as home. *2: If a point has been registered as home. *3: If a point has not been registered as work. *4: If a point has been registered as work. *5: This item can only be selected when a route has been registered to My Routes. BASIC OPERATION 204 SEARCH SCREEN Destinations can be set by address, category, POI, etc. By entering three words hit by search using the “what3words” function, destinations can be set for places where postal address is not precisely allocated. Enter keyword(s) to search for a destination. To use “what3words”, enter “ . ” in-between the three words. Search results screen will be displayed. (→P.206) Select to set the radius filter. Once the radius filter has been set, a search will only be performed for items within that radius. Select to display the current vehicle position. Select to select a POI category. Search will be performed within the radius filter set. Search results screen will be displayed. (→P.206) • Show Subcategories (Show Subcategories): Select to display more detailed categories. Select to display other POI categories. • Browse Categories (Browse Categories): Select to display all of the POI categories. BASIC OPERATION 205 Navigation System 7 (Add Home): Select to register a point as home. (→P.209) Home (Home): Select to set the point registered as home as the destination. • Go (Go ): Select to display the route calculation screen. (→P.210) • : Select to display location menu pop-up. (→P.198) (Add Work): Select to register a point as work. (→P.209) Work (Work): Select to set the point registered as work as the destination. • Go (Go ): Select to display the route calculation screen. (→P.210) • : Select to display location menu pop-up. (→P.198) : Select to display the last set destination. • Go (Go ): Select to display the route calculation screen. (→P.210) • : Select to display location menu pop-up. (→P.198) : Select to display the favorite screen. (→P.207) : Select to display a list of recently set destinations. Then select a point from the list. Location menu pop-up for the point will be displayed on the map screen. (→P.198) • Edit List (Edit List): Select to display the edit list screen. (→P.210) Each time the button is selected, select to display/hide the keyboard. Select to display the search map screen. Select to display the search list screen. SEARCH RESULTS SCREEN Select to narrow down the list by POI category. BASIC OPERATION 206 Some candidate destinations are displayed based on the input characters. The location menu pop-up is displayed on the map screen when an item is selected. (→P.198) If a non-specific point is selected, such as a street name, the following items will be displayed. • Show on Map (Show on Map): Select to display the location menu pop-up on the map screen. (→P.198) • Add Crossroad (Add Crossroad): Select to select an intersecting road and further refine the results. • Go (Go ): Select to search for a route to the selected destination. (→P.210) FAVORITES SCREEN The desired point can be registered as home, work, or favorite. The registered points can be set as a destination. Registered points can be added, changed and deleted on the favorites screen. The favorites screen can be accessed with the following method: 1. Display the map screen. (→P.196) 2. Select Menu (Menu). 3. → Favorites (Favorites) BASIC OPERATION 207 Navigation System 7 (Add Home): Select to register the home. (→P.209) Home (Home): Select to display the location menu pop-up for the point registered as home on the map screen. (→P. 198) (Add Work): Select to register the work. (→P.209) Work (Work): Select to display the location menu pop-up for the point registered as work on the map screen. (→P. 198) Select to display the recent destination screen. Recent destinations: Select a recent destination to display the location menu pop-up for that point on the map screen. (→P. 198) Edit List (Edit List): Select to display the edit list screen to delete the recent destinations. (→P.210) Select to display information of the current location. Select a favorite to display the location menu pop-up for that point on the map screen. (→P. 198) Edit List (Edit List) Select to display the edit list screen to delete the favorites. (→P.210) (Add) Select to register the favorite. (→P.209) BASIC OPERATION 208 REGISTERING HOME/WORK/FAVORITE POINT 1. Select (Add Home)/ (Add Work)/ (Add). 2. Perform any of the following to display a point you wish to register: ●● Select and select the desired point from the destination history. ●● Select Set from map (Set from map) and select the desired point on the map. ●● Enter keyword(s) in the keyword entry section and select the desired point from the candidates list. ●● Select the desired point on the map. 3. → / / ●● To register a favorite, enter a name. ●● Icons will be displayed on the map to indicate registered points. BASIC OPERATION 209 Navigation System 7 EDIT LIST SCREEN Unnecessary items can be deleted on the edit list screen. Select for the item you wish to delete. Select to skip to the next or previous page. Select to delete selected item(s). Select to select all items. Select again to deselect all items. ROUTE CALCULATION ROUTE CALCULATION SCREEN Up to 3 candidate routes searched are displayed according to conditions preset by the user. Candidate route overview Route search conditions A route search condition ( “Fastest Route”, “Shortest Route”, or “Most Eco-friendly Route”) can be pre-set on the navigation settings screen. (→P.219) Select to cancel route confirmation. BASIC OPERATION 210 Candidate routes (max. 3 routes) Displays estimated time of arrival and remaining distance of each candidate route displayed. If traffic jam is detected on the route, expected delay time will also be displayed. Select Go (Go) to start route guidance. WARNING llBe sure to obey traffic regulations and keep road conditions in mind while driving. If a traffic sign on the road has been changed, the route guidance may not indicate such changed information. NOTE llThe route for returning may not be the same as that for going. llThe route guidance to the destination may not be the shortest route or a route without traffic congestion. llRoute guidance may not be available if there is no road data for the specified location. llIf a destination that is not located on a road is set, the vehicle will be guided to the point on a road nearest to the destination. The road nearest to the selected point is set as the destination. BASIC OPERATION 211 Navigation System 7 ROUTE GUIDANCE ROUTE GUIDANCE ROUTE GUIDANCE SCREEN During route guidance, various types of guidance screens can be displayed depending on conditions. Select to stopping route guidance. Select to enable/disable voice guidance. (→P.196) Guidance route To display the current route screen, select the guidance route then and Manage Route (Manage Route). (→P.215) Current position Guidance display after next Next guidance display Displays the next street name, distance to the next turn, and an arrow indicating the turning direction. Select to display the route event list screen. Estimated time of arrival Select to change the displayed information between a waypoint and the destination. • Select and hold to turn display of the route bar on/off. • If “Auto-Hide Route Bar” on the navigation settings screen is turned on, the route bar will automatically be hidden and will only be displayed when new route information is available. Remaining distance and/or remaining time The displayed details can be changed on the navigation settings screen. (→P.219) Displays the change in travel time. ROUTE GUIDANCE 212 Traffic information icon Select to display the traffic information pop-up. Avoid (Avoid): Select to avoid a section of the current route based on traffic information. More Information (More Information): Select to display detailed information for the selected traffic information. Select to display the waypoint information pop-up. Delete This Stop (Delete This Stop) :Select to delete the selected waypoint from the route. Displays a POI on the route. Select a displayed icon to display the location menu pop-up. (→P.198) Select to display route option screen. (→P.214) XXJunction screen When approaching an expressway exit or a complicated intersection, the map switches to a 3D display if the necessary information can be displayed. An arrow indicates the lane in which you should drive. Signs are also displayed if the information is available. ●● This function can be turned on/off on the navigation settings screen. (→P.219) ROUTE GUIDANCE 213 Navigation System 7 XXLane recommendation screen When approaching a turning point, the lane recommendation will be displayed automatically. NOTE llIf the vehicle goes off the guidance route, the route is searched again. llFor some areas, the roads have not been completely digitized in our database. For this reason, the route guidance may select a road that should not be traveled on. ROUTE OPTION SCREEN Select to enable search for a parking place near the destination or a gas station or restaurant along the route. Select to display the search screen. (→P.205) Select to display the change route screen. • Show Alternatives (Show Alternatives): Displays up to 3 candidate routes searched according to conditions preset by the user. (→P.210) • Avoid Part of Route (Avoid Part of Route): Select to display a list of sections of the current route. (→P.215) • Reorder Stops (Reorder Stops): Select to change the order of the currently set destination and waypoints. (→P.215) ROUTE GUIDANCE 214 Select to display the route details confirmation screen. Select to display the navigation settings screen. (→P.219) CURRENT ROUTE SCREEN The current route screen can be displayed using the following method: 1. Select a guidance route on the route guidance screen. 2. Select . 3. → Manage Route (Manage Route) Clear Route (Clear Route) Select to stop the route guidance. Find Alternative (Find Alternative) Select to display the alternate route screen and search for 3 additional routes to the selected destination. (→P.210) ROUTE GUIDANCE 215 Navigation System 7 Avoid Blocked Road (Avoid Blocked Road) Select to display the alternate route screen and search for 3 additional routes which avoid the current road. (→P.210) Avoid Part of Route (Avoid Part of Route) Select to display a list of sections of the current route. Select the section you wish to avoid and then select to search for a new route. Avoid on This Route (Avoid on This Route) Select to change the avoidance criteria for the current route and search for a different route. When avoidance criteria are changed and OK (OK) is selected, the route calculation screen will be displayed. (→P.210) This item can only be selected when the current route has a section which is included in the avoidance criteria. Show Instructions (Show Instructions) Select to display the route details confirmation screen. Add Stop to Route (Add Stop to Route) Select to search for a waypoint on the map or search screen (→P.205) and then select to add it to the current route (→P.210). Add to My Routes (Add to My Routes) Select to name the current route and register it to My Routes. Change Route Type (Change Route Type) Select to change the route type of the current route and search for a new route. When route types are changed, the route calculation screen will be displayed. (→P.210) Reorder Stops (Reorder Stops) Select to change the order of the currently set destination and waypoints. Select a destination, select or to change its position in the list, and then select Done (Done) to confirm the change. Edit Stops (Edit Stops): Select to display the edit stops screen. To delete a waypoint, select then Delete (Delete). Play Route Preview (Play Route Preview)/ Stop Route Preview (Stop Route Preview) Play Route Preview (Play Route Preview): Select to enter route preview mode. (→P.217) Stop Route Preview (Stop Route Preview): Select to exit route preview mode. ROUTE GUIDANCE 216 PREVIEWING THE ROUTE A selected route can be previewed. The speed of the preview can be changed. Select to change the preview speed to “1X”/“2X”/“4X”. Select to temporarily stop the preview. STANDARD MAP ICON The following table shows the most frequently displayed route events. Turn left/right U-turn Keep left/right at the fork in the road. Turn left/right & sharp curve. Stay in the left/right lane. Go straight ahead at the intersection. Exit the junction Roundabout You have arrived at your destination. You have arrived at your waypoint. ROUTE GUIDANCE 217 Navigation System 7 Toll road Freeway Ferry trip TYPICAL VOICE GUIDANCE PROMPTS As the vehicle approaches an intersection, or point, where maneuvering the vehicle is necessary, the system’s voice guidance will provide various messages. WARNING llBe sure to obey the traffic regulations and keep the road condition in mind, especially when driving on IPD roads (roads that are not completely included in the map database). The route guidance may not have the most up-to-date information, such as the direction of a one way street. NOTE llTo adjust the voice guidance volume: →P.101 llSetting voice guidance: →P.196 llVoice guidance may be made early or late. llIf the system cannot determine the current position correctly, you may not hear voice guidance or may not see the magnified intersection on the screen. ROUTE GUIDANCE 218 SETUP NAVIGATION SETTINGS 1. Select . 2. Select Settings (Settings). 3. → (Navigation) 4. Select the desired item to be set. NAVIGATION SETTINGS SCREEN SETUP 219 Navigation System 7 POI icons can be displayed on the map screen when “Show POI Icons on Map” is turned on and up to 5 POI icon types have been selected. Select to turn the display for parking lots, gas stations and rest areas on/off for the route being traveled during route guidance. Select to set the displays for the estimated remaining distance and estimated remaining time to the destination. (→P.212) Select to turn the freeway exit preview on/off. Select to set whether to automatically enlarge the map when approaching intersections or turning points during route guidance. Select to turn the route bar auto-hide function on/off. (→P.212) Select to change the preferred route type when searching for a new route. Select to set avoidance criteria for the route calculation. Select to turn the traffic alert sound on/off. During a route guidance: Select to display route option screen. (→P.214) Not during a route guidance: Select to display the main menu screen. (→P.203) Select to set the updating of map data. (→P.223) SETUP 220 TIPS FOR THE NAVIGATION SYSTEM GPS (GLOBAL POSITIONING SYSTEM) REGARDING ERRORS IN CURRENT POSITION DISPLAY The system displays the vehicle current position based on GPS information and data from various sensors and road maps. However, when the radiowave signals from GPS satellites are weak or when signals are received from only two satellites or less, errors may occur in the position. Modifying or adjusting the system will not prevent these errors. LIMITATIONS OF THE NAVIGATION SYSTEM This navigation system calculates the current position using satellite signals, various vehicle signals, map data, etc. However, an accurate position may not be shown depending on satellite conditions, road configuration, vehicle condition or other circumstances. The Global Positioning System (GPS) developed and operated by the U.S. Department of Defense provides an accurate current position, normally using 4 or more satellites, and in some case 3 satellites. The GPS system has a certain level of inaccuracy. While the navigation system compensates for this most of the time, occasional positioning errors of up to 300 feet (100 m) can and should be expected. Generally, position errors will be corrected within a few seconds. The GPS signal may be physically obstructed, leading to inaccurate vehicle position on the map screen. Tunnels, tall buildings, trucks, or even the placement of objects on the instrument panel may obstruct the GPS signals. The GPS satellites may not send signals due to repairs or improvements being made to them. Even when the navigation system is receiving clear GPS signals, the vehicle position may not be shown accurately or inappropriate route guidance may occur in some cases. CAUTION llThe installation of window tinting may obstruct the GPS signals. Most window tinting contains some metallic content that will interfere with GPS signal reception of the antenna in the instrument panel. We advise against the use of window tinting on vehicles equipped with navigation systems. TIPS FOR THE NAVIGATION SYSTEM 221 Navigation System 7 ●●Accurate current position may not be shown in the following cases: • When driving on a small angled Y-shaped road. • When driving on a winding road. • When driving on a slippery road such as in sand, gravel, snow, etc. • When driving on a long straight road. • When freeway and surface streets run in parallel. • After moving by ferry or vehicle carrier. • When a long route is searched during high speed driving. • After repeating a change of direction by going forward and backward, or turning on a turntable in a parking lot. • When leaving a covered parking lot or parking garage. • When a roof carrier is installed. • When driving with tire chains installed. • When the tires are worn. • After replacing a tire or tires. • When using tires that are smaller or larger than the factory specifications. • When the tire pressure in any of the 4 tires is not correct. ●● Inappropriate route guidance may occur in the following cases: • When turning at an intersection off the designated route guidance. • If you set more than 1 destination but skip any of them, auto reroute will display a route returning to the destination on the previous route. • When turning at an intersection for which there is no route guidance. • When passing through an intersection for which there is no route guidance. • During auto reroute, the route guidance may not be available for the next turn to the right or left. • During high speed driving, it may take a long time for auto reroute to operate. In auto reroute, a detour route may be shown. • After auto reroute, the route may not be changed. • If an unnecessary U-turn is shown or announced. • If a location has multiple names and the system announces 1 or more of them. • When a route cannot be searched. • If the route to your destination includes gravel, unpaved roads or alleys, the route guidance may not be shown. • Your destination point might be shown on the opposite side of the street. TIPS FOR THE NAVIGATION SYSTEM 222 • When a portion of the route has regulations prohibiting the entry of the vehicle that vary by time or season or other reasons. • The road and map data stored in the navigation system may not be complete or may not be the latest version. NOTE llThis navigation system uses tire turning data and is designed to work with factory-specified tires for the vehicle. Installing tires that are larger or smaller than the originally equipped diameter may cause inaccurate display of the current position. The tire pressure also affects the diameter of the tires, so make sure that the tire pressure of all 4 tires is correct. MAP DATA REGARDING ROADS AND PLACE NAME DATA When maps are created, land surveys are conducted and information on road improvements and reopening is collected to provide the most accurate information possible. However, modifications to roads, place names and facilities may be carried out at any time. Consequently, we cannot guarantee that map data contains no errors in road positions, configuration and names, or in facility names. SUBARU MAP UPDATE Map data can be updated using the following methods: ●●USB memory: All map data can be updated at once. →P.224 ●●Wi-Fi®: Individual regions can be selected and their map data updated.* →P.225, 226 *: Up to 8 regions can be selected for the automatic update function. TIPS FOR THE NAVIGATION SYSTEM 223 Navigation System 7 NOTE llMap update using Wi-Fi® may not be available in some countries. llFor the best possible navigation experience, regularly update maps for all frequented regions, including nearby states. Failure to update maps for surrounding states may result in inaccurate map information during interstate travel. Updates made using a USB memory device will update map information for all states. Please visit Subaru.com for more information and the latest updates. llIf the map update fails or cannot be performed when using Wi-Fi®, check the communication status of the connected device. If there is a problem with communication, perform the procedure again using a different Wi-Fi® access point. llIf the map update procedure fails, refer to the “TROUBLESHOOTING” section. (→P.252) llSubaru may terminate or suspend your access to all or part of these services for any or no reason, including without limitation, any violation of the terms detailed at: https://subaru-maps.com/#/termsofuse UPDATING THE MAP DATA MANUALLY USING A USB MEMORY DEVICE Maps can be updated using a USB memory device. For details and to download update data, refer to the following URL: https://subaru-maps.com/ 1. Connect to a USB memory device. (→P.70) 2. Select (Map Update) on the navigation settings screen. (→P.219) 3. → USB (USB) 4. After the updates have been completed, turn the ignition switch to the “LOCK”/“OFF” position and exit the vehicle. 5. Close the driver’s door and lock the doors, then move at least 10 feet (3 m) away from the vehicle to prevent the key from interfering. 6. After at least 5 minutes have elapsed, start the engine again. ●● The new map data will be applied. TIPS FOR THE NAVIGATION SYSTEM 224 UPDATING THE MAP DATA MANUALLY USING Wi-Fi® The map data may also be updated via Wi-Fi® network. 1. Connect to a Wi-Fi® network. (→P.96) 2. Select (Map Update) on the navigation settings screen. (→P.219) 3. → Wi-Fi (Wi-Fi) 4. Select the regions for which maps are to be updated. 5. → Update XX MB (Update XX MB) ●● The update for the selected region will be automatically downloaded and installed. 6. After the updates have been completed, turn the ignition switch to the “LOCK”/“OFF” position and exit the vehicle. 7. Close the driver’s door and lock the doors, then move at least 10 feet (3 m) away from the vehicle to prevent the key from interfering. 8. After at least 5 minutes have elapsed, start the engine again. ●● The new map data will be applied. TIPS FOR THE NAVIGATION SYSTEM 225 Navigation System 7 UPDATING THE MAP DATA AUTOMATICALLY USING Wi-Fi® 1. Follow STEPS 1 to 3 in “UPDATING THE MAP DATA MANUALLY USING Wi-Fi®”. (→P.225) 2. Select Automatic Update (Automatic Update). 3. Set “Update maps automatically (at most 8 maps can be selected)”. 4. Select the regions that you would like to be updated. 5. After the updates have been completed, turn the ignition switch to the “LOCK”/“OFF” position and exit the vehicle. 6. Close the driver’s door and lock the doors, then move at least 10 feet (3 m) away from the vehicle to prevent the key from interfering. 7. After at least 5 minutes have elapsed, start the engine again. ●● The new map data will be applied. TIPS FOR THE NAVIGATION SYSTEM 226 227 Voice Recognition System Voice Recognition System Voice Recognition System Operation 228 Voice Recognition System ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 228 Using The Voice Recognition System ž ž ž ž ž ž ž ž ž ž ž ž ž 228 Voice Recognition System Operation žž ž ž ž ž ž ž ž ž ž ž ž 229 Command List žž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž ž 230 VOICE RECOGNITION SYSTEM OPERATION VOICE RECOGNITION SYSTEM The voice recognition system enables the navigation, audio, hands-free systems, etc. to be operated using voice commands. Refer to the command list for samples of voice commands. (→P.230) USING THE VOICE RECOGNITION SYSTEM STEERING SWITCH ●●Press the talk switch to start the voice recognition system. ●● To cancel voice recognition, press and hold the talk switch. MICROPHONE ●● It is unnecessary to speak directly into the microphone when giving a command. NOTE llThis function or part of this function may not be available in some languages and countries. llWait for the confirmation beep before speaking a command. VOICE RECOGNITION SYSTEM OPERATION 228 NOTE llVoice commands may not be recognized if: • Spoken too quickly. • Spoken at a low or high volume. • Driving with a window open. • Passengers are talking while voice commands are spoken. • The air conditioning speed is set high. • When air from the ventilator blows directly toward the microphone. llIn the following conditions, the system may not recognize the command properly and using voice commands may not be possible: • The command is incorrect or unclear. Note that certain words, accents or speech patterns may be difficult for the system to recognize. • There is excessive background noise, such as wind noise. VOICE RECOGNITION SYSTEM OPERATION 1. Press the talk switch. ●●After the voice recognition top screen has been displayed, speech guidance will commence. 2. Say the command. XX11.6-inch display system/11.6-inch display with Navi system XXDual 7.0-inch display system ●●When selecting Help (Help) or saying “Help”, all commands supported by the system are listed. ●● If a category name is selected, the selected category command list will be displayed. VOICE RECOGNITION SYSTEM OPERATION 229 Voice Recognition System 8 ●● To cancel voice recognition, select , or press and hold the talk switch. NOTE llTurn the “ ” knob, or use the “VOL +/VOL -” switch on the steering wheel to adjust the speech guidance volume. COMMAND LIST Recognizable voice commands and their actions are shown below. ●● Frequently used commands are listed in the following tables. ●● For devices that are not installed in the vehicle, the related commands will not be displayed in the screen. Also, according to conditions, other commands may not be displayed in the screen. ●● The functions available may vary according to the system installed. ●● If the system language is changed on the general settings screen, the language of the voice recognition function will also change. Refer to the vehicle Owner’s Manual for details. NOTE llThe notations used in the commands are as follows. • <○○○>: Numbers, titles, or names to be spoken VOICE RECOGNITION SYSTEM OPERATION 230 XXNavigation commands* *: If equipped Voice command Function Enter an address Enables setting a destination by saying the address with city and state Navigate to