“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10234843
Manufacturer Communication Number: 0215614
Summary
Service Part Number Change to The V-Belt
NUMBER: 02-156-14
DATE: 05/27/14
APPLICABILITY: | 2013-14MY Legacy and Outback 2.5L N/A FB Engine Models |
SUBJECT: | Service Part Number Change to the V-Belt (Serpentine Drive / Accessory Belt) to Address A Squeak, Squeal, or Chirp Sound |
INTRODUCTION
This bulletin announces a service part number change for the V-Belt (serpentine drive/accessory belt) applicable to the vehicles specified above. This part is being replaced to address a slip-type sound (squeak, squeal or chirp) due to a production variation found in the original belt. If presented with one of the above listed vehicles exhibiting this condition, replace the existing V-Belt (serpentine drive/ accessory belt) with the new part number shown below.
PART NUMBER
APPLICABILITY | PART NAME | OLD PART NUMBER | NEW PART NUMBER |
2013 -2014MY Legacy and Outback | V-Belt | 809221190 | 809221160 |
SERVICE PROCEDURE / INFORMATION
Follow the procedure outlined in the applicable Service Manual for replacement of the V-Belt (serpentine drive belt).
4 Affected Products
Vehicles
MAKE | MODEL | YEAR |
SUBARU | LEGACY | 2013-2014 |
SUBARU | OUTBACK | 2013-2014 |
1 Associated Document
Manufacturer Communications
NUMBER: 02-156-14
DATE: 05/27/14
https://www.nhtsa.gov/recalls?nhtsaId=10234843
NHTSA ID Number: 10068290
Manufacturer Communication Number: 02-156-14
Summary
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
1 Associated Document
Service Bulletin Document
NUMBER: 02-156-14
DATE: 05/27/14
https://www.nhtsa.gov/recalls?nhtsaId=10068290
“This site contains affiliate links for which OEMDTC may be compensated” |
- For removing or installing serpentine belts on vehicles with spring-loaded automatic belt tensioners
- Tool includes 24-in handle with 3/8-in square drive and 9-1/4-in adapter/extension with 1/2-in square drive
- Adapter fits on handle in 8 different positions
- For removing or installing serpentine belts on vehicles with spring-loaded automatic belt tensioners
- Includes 24 inch handle with 3/8 inch square drive
- For removing and installing serpentine belts on vehicles with spring-loaded belt tensioners
- Includes accessories for specific vehicle applications, including GM, Ford, Chrysler, SAAB, VW and Volvo.
- INCLUDES: Complete accessory kit included for multi vehicle applications
- COMES IN: Heavy duty blow molded case to keep set protected and organized
- EASY TO READ: Includes detailed usage instruction with photos
- Complete tool set for removing or installing the serpentine belt on vehicles with a spring-loaded belt tensioner pulley. Come with red storage case.
- Combines the advantages of a ratcheting wrench with the requirements of the serpentine belt removal tool to provide the best possible combination.
- Comes with extension for hard-to-reach belt tensioners. Eight low profile sockets and extension help to fit into tight spots.
- Includes Drive Tools: 14" extension arm, ratcheting wrench with 19 mm and 22 mm female ratchet drive, and 3/8", 1/2" and 3/4" square adapters
- Includes Sockets: 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm and 19 mm. Includes Crowfoot Wrenches: 13 mm, 14 mm and 15 mm.
- Product type: SPORTING_GOODS
- Country of origin: China
- Releases tension on serpentine belts with spring loaded idler pulleys
- HANDLE: Cushioned red handle makes use of this tool simple and easy
- Combining the innovation of a GEARWRENCH ratcheting wrench with the requirements of the serpentine belt removal tool to provide the best possible combination
- Complete tool set for removing or installing the serpentine belt on vehicles with a spring loaded belt tensioner pulley
- Long bar can hold sockets directly or attach to the ratcheting wrench for maximum access
- Includes Drive Tools: Long Bar, Special GearWrench Ratcheting Wrench, and 3/8inch, 1/2inch and 3/4inch Adapters
- Includes 6 Point Sockets: 13 millimeter, 14 millimeter, 15 millimeter, 16 millimeter, 17 millimeter, 18 millimeter and 19 millimeter
- 【Suitable for】: Made of Cadmium Plated Steel, used to adjust the timing belt tensioner for vag- VW, for Skoda, for Seat engines
- 【Position Adjuatible】: The spacing of pins is 18mm (center to center), 5 variable positions for extra easy use
- 【Compatible】: Special low-profile, pin wrench compatible used to adjust the timing belt tensioner on a variety of late-model engines
- 【Special Design】: Allows the head to be mounted in three different orientations relative to the handle
- 【Widely Used】: This allows access in even the most confined environments and for the greatest variety of vehicles
- Designed to provide access and leverage to hard to reach pulleys
- COMFORT: Dipped handle for comfort and secure grip
- Durable contruction
- Fits the special bolt that secures the pulley to the belt tensioner on most 1ZZ and all 2ZZ Toyota engines
- Use this socket if the head of the bolt on the pulley is exposed, and not covered with a plastic cap
- If your 1ZZ pulley has a black plastic cap covering the head of the bolt, then it is a Star bolt
- Needed when replacing the pulley only on stock OEM tensioners, not the full assembly
- Use with 1/2 in. square or 7/8 in. combination wrench, or socket
- Premium Quality: This adjuster pulley spanner is made of high quality cadmium plated steel, sturdy, corrosion resistant and steady.
- Special Design: Special low-profile, pin wrench compatible used to adjust the timing belt tensioner on a variety of late model VW engines. Special design allows the head to be mounted in three different orientations relative to the handle.
- 5 Variable Positions: In this tension pulley spanner, it with 5 variable positions, which can meet different usage requirements. The engine timing belt tensioner wrench retains the tensioner to allow for tightening of the tensioner nut.
- Practical Use: This engine timing belt tensioner wrench allows the head to be installed in three different directions relative to the handle. The engine timing belt tool also allows access in the narrowest environment and in the most types of vehicles.
- Wide Application: In this tension adjuster pulley wrench tool, Adjustable-angle pins engagse the offset center hub of the timing belt, tensioner pulley, allowing a wrench to be placed on the pulley lock nut, Suitable for both petrol and diesel applications.
- Provides the required leverage and clearance to release spring pressure and move the tensioner pulley.
- This Alltooetools tool is used to release tension on the serpentine belt self-adjusting idler pulley.
- Fits idler pulleys requiring 15, 16, 18mm hex or 3/8" or 1/2" square drive.
- Also includes 13, 14 & 15mm crowfoot wrenches. Handle has a 3/8" drive for other jobs requiring extra leverage.
- PLS NOTE: Handle in two colors, red or blue, random delivery.
Last update on 2024-04-08 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
Bulletin Number: 02-156-14; Date: 05/27/14 Page 1
INTRODUCTION
This bulletin announces a service part number change for the V-Belt (serpentine drive/accessory belt) applicable to the vehicles specified above. This part is being replaced to address a slip-type sound (squeak, squeal or chirp) due to a production variation found in the original belt. If presented with one of the above listed vehicles exhibiting this condition, replace the existing V-Belt (serpentine drive/ accessory belt) with the new part number shown below.
PART NUMBER APPLICABILITY
2013 -2014MY
Legacy and Outback PART NAME V-Belt OLD PART NUMBER 809221190 NEW PART NUMBER 809221160 SERVICE PROCEDURE / INFORMATION Follow the procedure outlined in the applicable Service Manual for replacement of the V-Belt (serpentine drive belt). WARRANTY / CLAIM INFORMATION For vehicles within the Basic New Car Limited Warranty period, this repair may be claimed using the following information: LABOR DESCRIPTION
DRIVE BELT R&R
LABOR OPERATION #
A241-083 FAIL CODE
CAX-25 LABOR TIME
0.3
NUMBER: 02-156-14
DATE: 05/27/14
APPLICABILITY: 2013-14MY Legacy and Outback
2.5L N/A FB Engine Models
SUBJECT: Service Part Number Change to The V-Belt (Serpentine Drive / Accessory Belt) to Address A Squeak, Squeal, or Chirp Sound
SERVICE BULLETIN
ATTENTION:
GENERAL MANAGER 0
PARTS MANAGER 0
CLAIMS PERSONNEL 0
SERVICE MANAGER 0
IMPORTANT – All
Service Personnel Should Read and Initial in the boxes provided, right. CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS.
Subaru Service Bulletins are intended for use by professional technicians ONLY. They are written to inform those technicians of conditions that may occur in some vehicles, or to provide information that could assist in the proper servicing of the vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do the job correctly and safely. If a condition is described, DO NOT assume that this Service Bulletin applies to your vehicle, or that your vehicle will have that condition.
Continued…
SUBARU OF AMERICA, INC. IS ISO 14001 COMPLIANT
ISO 14001 is the international standard for excellence in Environmental Management Systems. Please recycle or dispose of automotiveproductsinamannerthatisfriendly to our environment and in accordance with all local, state and federal laws and regulations.
© 2014 Subaru of America, Inc. All rights reserved.
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END