“This site contains affiliate links for which OEMDTC may be compensated” |
Accessory Installation Guide
2022MY WRX – STI Cherry Red Mirror Covers | SG970VA000 |
STI COV MIR RH RED | SG970VA000 |
STI COV MIR LH RED | SG970VA010 |
Installation and Operations instructions for Cover Mirror RH/LH RED
Part Number:SG970VA000/010
SG970VA000
https://static.oemdtc.com/AccessoryInstallationGuide/SG970VA000.pdf
“This site contains affiliate links for which OEMDTC may be compensated” |
- Fitment: for Subaru Crosstrek 2013-2014, for Impreza 2012-2014 (DOES NOT FIT WRX OR STI), for Forester 2014-2018, for Legacy Outback 2013-2014. Replace OE number: 91059AJ220. Fits Mirror Assembly Without Turn Lamps / Turn Signals!
- Enhance Appearance: Nice color design, enhance your exterior style, makes your car uniquely luxurious and stylish.
- Protect Rear View Mirror: Effectively protect your rearview mirror from damage.
- Easy to installation: Easy to install, firmly, not easy to fall off. Perfect replacements for your old or damaged mirror cover.
- Package Included: 1x Right Side Rear View Mirror Lower Cover.
- Fitment: for Subaru Crosstrek 2013-2014, for Impreza 2012-2014 (DOES NOT FIT WRX OR STI), for Forester 2014-2018, for Legacy Outback 2013-2014. Replace OE number: 91059AJ220. Fits Mirror Assembly Without Turn Lamps / Turn Signals!
- Enhance Appearance: Nice color design, enhance your exterior style, makes your car uniquely luxurious and stylish.
- Protect Rear View Mirror: Effectively protect your rearview mirror from damage.
- Easy to installation: Easy to install, firmly, not easy to fall off. Perfect replacements for your old or damaged mirror cover.
- Package Included: 1x Left Side Rear View Mirror Lower Cover.
- Fitment: for Subaru Forester IV 2013 2014 2015 2016 2017 for Subaru Legacy 2013 2014 2015 2016 for Subaru Outback IV 2012 2013 2014 2015 2016 2017 for Subaru Impreza hatchback IV 2012 2013 2014 for Subaru XV 2012 2013 2014 2015 2016 2017 for Subaru Exiga 2015.
- Enhanced Protection: Made of high-quality plastic material, this mirror cover effectively protects your rearview mirror from damage caused by scratches, impacts, and weather elements.
- Easy Installation: Replace your old or damaged mirror cover effortlessly with no special tools required. The installation process is quick and hassle-free.
- Replace OE number: 91059AJ230.Placement on Vehicle: Left;Size: 23x8.4x6cm / 9.06"x3.31"x2.36"(L*W*H)
- Package Included: 1x Left Side Rear View Mirror Lower Cover.
- ★【Compatibility】Fit for Subaru Crosstrek 2013-2014,Impreza 2012-2014 (DOES NOT FIT WRX OR STI),Forester 2014-2018 (non eyesight detection),Legacy 2013-2014,Outback 2013-2014.Manufacturer Part Number 91054AJ220,91054AJ230.Fits Mirror Assembly Without Turn Lamps / Turn Signals!
- ★【Premium quality】Automotive grade ABS construction,sturdy and weathering resistance for long time use.Durable and long service life.
- ★【Protectiveness】Effectively protect your rearview mirror from damage;Nice color design, enhance your exterior style, makes your car uniquely luxurious and stylish.
- ★【Easy to installation】Exterior Right Side Rear View Mirror Cover Easy to install, firmly, not easy to fall off. great replacements for your old or damaged mirror cover.
- ★【Package included】1 x Right Side Gloss Black Rear view Mirror Lower Cover
- Application for Mirror Assembly without Turn Lamps / Turn Signals.
- Application for Subaru 2013-2014 XV Crosstrek, 2012-2014 Impreza, 2014-2018 Forester, 2013-2014 Legacy, 2013-2014 Outback.
- Fitment: Door side mirror covers fit for Subaru WRX/STI 2015 2016 2017 2018 2019 2020 2021 with turning light
- Durable Material: Our side mirror covers for cars are made of high quality ABS material, with the polished and shinning surface and UV-protected coating, high toughness and durable
- Protect Your Mirror: The rearview mirror cover caps could effectively protecting your rearview mirrors from scratches and impacts, making your car look more unique
- Easy to Install: Clean the surface of the original rearview mirror, peel off the tape, heat the tape for better adhesion, position our product correctly, and press firmly for approximately 1 minute
- What You Will Get: You'll get 1 pair of mirror cover and after-sales service, if you have any questions please feel free to let us know
- OE Number:91054FL21A(Right)
- For 2019-2023 Ascent, For 2018-2019 Outback, For 2018-2019 Legacy, For 2017-2023 Impreza.
- The product is Copy the original shell color with black patterns
- Material: Made of ABS material, Easy installation and installation, Direct replacement, Product bright black with three layers of baking paint
- The size and interface size have been tested and perfectly matched to replace the original factory part.
Last update on 2024-07-09 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
Part Number:SG970VA000/010 Production Date: September,2021 △0 Installation and Operations instructions for Cover Mirror RH/LH RED • Thank you for purchasing this product. • This manual provides installation and handling instructions for this product, and precautions to be observed. • Before using this product, be sure to read “Safety Precautions” and use the product properly. • Keep this manual in a safe place, such as the glove box, and refer to it whenever necessary. Important precautions are indicated with the following marks. Be sure to observe those precautions. Warning Precautions that you must observe for your safety. [Failure to observe these precautions may result in death or serious injury.] Caution Precautions that you must observe for your safety and for your vehicle. [Failure to observe these precautions may result in damages or accidents.] *Advice Information that you should familiarize yourself with. Information that are useful. – l – If abnormal noise or vibration occurs while driving, pull over the car immediately to a safe place, and then inspect and re-tighten the attaching bolts. If abnormalities persist, perform inspection and make necessary repairs immediately. Lh Lh L’.’.h Warning · Never attempt to modify this product. This may damage the product and may become cause of serious accidents. Be sure to stop the engine during work for safety reasons. Be sure to tighten bolts and nuts firmly. Inspect the nuts and bolts after the first 60 miles (100 km) of driving after attaching them. Re-tighten them if necessary. If you continue to drive in this condition, damages or accidents may occur. · Stop using this product immediately it it has defects such as deterioration and breakage, or receives a strong impact, as these conditions impair the product’s original performance. Make sure that no part comes in contact with the battery while working. I!\ Caution · This product does not improve the limit performance significantly. Always drive safely. · Do not use this product on inapplicable vehicles or for purposes other than it is designed for. Doing so may result in damages or accidents. · Install this product in accordance with the service manual issued by SUBARU CORPORATION for your model. Also make sure to adhereto the precautions described in this document. If bolts and nuts are not tightened with specified torque while installing this product, they may be damaged or become loose. Make sure to tighten them with the specified torque. *Advice · SUBARU shall not be held liable for any direct or indirect damage due to failures or other malfunction caused by incorrectinstallation or handling of this product. · SUBARU does not honor warranty claims for malfunctions of products or vehicles that occur directly or indirectly due to theinstallation of this product. · Malfunctions of vehicles that could occur due to the installation of this product may not be covered by the SUBARU vehicle warranty. · When replacing parts with this product, be sure to use genuine SUBARU parts for non-reusable parts, consumables, oil and grease. · Product specifications are subject to change without notice. · Installation of this product may cause deterioration in ride comfort or significant changes in driving characteristics. 1. Part Number and Applicable Model Part number Part name Applicable model SG970VA000 STI COV MIR RH RED WRX STI TYPE A ~ SG970VA010 STI COV MIR LH RED WRX TYPE A ~ ★SG970VA000/010 is applicable only to vehicles with turn signal light. ★Applicable models are representative. Please check the WEB for the latest application. 2. Components Part number Parts name SG970VA000 STI COV RH MIR RED each 1 SG970VA010 STI COV LH MIR RED each 1 * Please check the number of parts. In case, please contact your dealer if there is a shortage or differences. 3.Work procedure Please refer to the service manual issued by SUBARU CORPORATION. for the details of the work. (1) Remove the original mirror cover. (2) Attach the STI mirror cover. Handling Precautions SUBARU CORPORATION -2- Warning ・If abnormal noise or vibration occurs while driving, pull over the car immediately to a safe place, and then inspect and re-tighten the attaching bolts. If abnormalities persist, perform inspection and make necessary repairs immediately. If you continue to drive in this condition, damages or accidents may occur. ・Inspect the nuts and bolts after the first 60 miles (100 km) of driving and periodically after attaching them. Re-tighten them if necessary. ・Please do not use this product for other than applicable models. Installation Procedures To customers Caution ・We recommend that this product be installed at an authorized Subaru maintenance facility to ensure proper installation and function. w w
**************************************************************************************************************
SEOCONTENT-END