“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10222337
Manufacturer Communication Number: WRB-22R
Summary
In the interest of customer satisfaction, Subaru of America, Inc. (Subaru) is initiating a new voluntary emissions recall for certain 2022 model year WRX vehicles equipped with a 2.4L turbo engine.
NUMBER: WRB-22
DATE: 07/18/22
REVISED: 09/02/22
APPLICABILITY: | 2022 MY WRX |
SUBJECT: | PCV Vacuum Hose Clamp Lock Failure |
In the interest of customer satisfaction, Subaru of America, Inc. (Subaru) is initiating a new voluntary emissions recall for certain 2022 model year WRX vehicles equipped with a 2.4L turbo engine.
REASON FOR THIS VOLUNTARY EMISSIONS RECALL
The affected vehicles may contain a hose clamp securing the upper connection of the PCV vacuum hose (blow-by hose) which may not have been fully locked during assembly.
DESCRIPTION OF THE REPAIR
Subaru retailers will inspect the hose clamp securing the upper connection of the PCV vacuum hose (blow-by hose) and, if necessary, adjust the hose clamp to a fully locked condition at no cost to the customer.
Affected Vehicles
The number of U.S. vehicles included in this service program is 5,837.
Model Year | Carline | Production date range |
2022 | WRX | January 21, 2022 – May 12, 2022 |
Not all vehicles in the production date range listed above may be included in this voluntary emissions recall. Coverage for all affected vehicles must be confirmed by using the Vehicle Coverage Inquiry function on subarunet.com.
Retailer Responsibility
Please be advised that it is a violation of Federal law for a dealer to deliver a new motor vehicle covered by a recall under a sale or lease until the defect is remedied. Therefore, any Authorized Subaru Retailer failing to perform the applicable service procedures to correct all affected vehicles in their inventory prior to the vehicle being placed in service may be subject to civil penalties of up to $22,423 per violation (i.e., for each vehicle), as provided in 49 CFR §578.6 and will also be in breach of the Subaru Dealer Agreement.
Any vehicles listed in any recall/campaign that are in retailer stock must be:
- Immediately identified
- Tagged or otherwise marked to prevent their delivery or use prior to repair
- Repaired in accordance with the repair procedures outlined in the bulletin
Retailers are to promptly perform the applicable service procedures, to correct all affected vehicles in their inventory (used, demo & SSLP). Whenever a vehicle subject to this voluntary emissions recall is taken into retailer inventory necessary steps should be taken to ensure the correction has been made before selling or releasing the vehicle.
Owner Notification
Subaru will notify affected vehicle owners by first class mail in August. Retailers will be advised when the notification is scheduled.
DESCRIPTION OF CONCERN:
PART INFORMATION:
REMINDER: Always order the most up-to-date replacement parts based on the specific VIN being repaired.
Part Description | Part Number |
HOSE CLAMP | 805919150 |
IMPORTANT NOTE: The hose clamp will ONLY require replacement if it is found to have excessive damage and cannot be secured.
REQUIRED TOOLS:
35-45° Bent Long-Neck Needle Nose Pliers will be required to perform the procedures outlined below.
NOTE: The Snap On® 11” Talon Grip™ Long-Neck 35° Bent Needle Nose Pliers (#411CF) are a usable suggestion.
SERVICE PROCEDURE OUTLINE:
SERVICE PROCEDURE / INFORMATION:
REMINDER: Customer satisfaction and retention starts with performing quality repairs.
STEP 1: Remove the two mounting fasteners and then removed the intake duct.
STEP 2: Perform a visual inspection of the hose clamp claw positioning from the small opening within the clamp.
Examples of Hose Clamp Claw Conditions
IMPORTANT NOTE: The hose clamp direction may be in the opposite direction of those pictured in the examples below.
STEP 3: Adjusting the hose clamp position.
- Position the clamp evenly 3mm (0.12 inch) from the top the hose.
- Make sure the lock portion is facing the front of the vehicle.
STEP 4: Using 35-45° bent long-neck needle nose pliers, squeeze the clamp at the two points indicated with arrows below. Confirm the lock portion is hooked properly onto the claw.
STEP 5: Using 35-45° bent long-neck needle nose pliers, squeeze the lock portion of the clamp, and confirm it is fully locked.
STEP 6: Confirm the clamp is fully locked by visually inspecting the claw position as shown in the image below.
IMPORTANT CAUTIONS:
- If the clamp (805919150) is damaged or broken it MUST be replaced with a new part.
- If replacement is required, ONLY the upper side of the PCV Vacuum Hose needs to be disconnected. Use caution to not damage any surrounding hoses and/or harnesses.
STEP 7: Install the intake duct and the two mounting fasteners.
CALIFORNIA “VEHICLE EMISSION RECALL – PROOF OF CORRECTION” CERTIFICATE
The California Air Resources Board and the Department of Motor Vehicles Registration/Recall Program requires that all emission related Recall/Campaign or Service Program repairs be completed before a vehicle registration is renewed. Please provide owners of vehicles registered in the state of California a completed “Vehicle Emission Recall – Proof of Correction” certificate. Vehicle owners should be advised to retain this certificate because the California Department of Motor Vehicles may require they provide proof this service program repair has been completed. Additional certificates are available through normal parts ordering channels using part number MSA6P1301. Quantity 1 = 1 booklet of 50 certificates.
This notice applies to the VIN identified in the address section printed below
Subaru Service Program WRB-22
Voluntary Emissions Recall
August 2022
Dear Subaru Owner:
We would like to thank you for your selection of a Subaru vehicle. We take pride in our products and are committed to your continued satisfaction.
Subaru of America, Inc. (Subaru) is initiating a new voluntary emissions recall for certain 2022 model year WRX vehicles equipped with a 2.4L turbo engine. You have received this notice because our records indicate that you currently own one of these vehicles.
REASON FOR THIS VOLUNTARY EMISSIONS RECALL
Your vehicle may contain a hose clamp securing the upper connection of the PCV vacuum hose (blow-by hose) which may not have been fully locked during assembly.
REPAIR
Your Subaru retailer (dealer) will inspect the hose clamp securing the upper connection of the PCV vacuum hose (blow-by hose) and, if necessary, adjust the hose clamp to a fully locked condition at no cost to you.
WHAT YOU SHOULD DO
You should immediately contact your Subaru retailer for an appointment to have repair performed.
HOW LONG WILL THE REPAIR TAKE?
The actual time to perform this repair is less than twenty minutes. Your retailer can provide you with a better estimate of the overall time for this service visit, as it may be necessary to make your vehicle available for a longer period of time for scheduling purposes.
CALIFORNIA REGISTERED OWNERS
The California Air Resources Board requires that emission-related campaigns be completed prior to California’s vehicle registration renewal process; without this repair, you will not be able to register your vehicle during your next annual registration. Upon completion of this campaign, your California dealer will complete and provide you a “Proof of Correction Certificate.” If required, present the certificate to the California Department of Motor Vehicles (the “DMV”) when renewing your California registration as proof of campaign completion. If the DMV does not request the certificate, we recommend that you keep it for your records.
In addition, the State of California requires that every vehicle must pass an emission test (SMOG Check) every two years and before it is sold. Without the service we are providing at no charge, your vehicle may not pass this test.
CHANGED YOUR ADDRESS OR SOLD YOUR SUBARU?
If you have moved or sold your vehicle, please go to https://www.subaru.com/support/ customer-support.html to send us your information.
IF YOU NEED FURTHER ASSISTANCE:
To locate the nearest Subaru retailer, you can access our website at www.subaru.com and select ‘Find a Retailer.’
For additional information, please go to: http://www.wra22.service-campaign.com.
If you need additional assistance, please contact us directly:
- By e-mail: Go to https://www.subaru.com/subaru-email-us.html
- By telephone: 1-844-373-6614
Monday through Friday between 8:00 a.m. and 7:00 p.m. ET
- By U.S. Postal mail: Write us at Subaru of America, Inc.,
Attn: Customer Advocacy Department,
P.O. Box 9103, Camden, NJ 08101-9877
Please contact us immediately if the Subaru retailer fails or is unable to make the necessary repairs free of charge.
Your continued satisfaction with your Subaru is important to us. Please understand that we have taken this action in the interest of your vehicle’s proper operation. We sincerely apologize for any inconvenience this matter may cause and urge you to schedule an appointment as soon as possible to have this repair performed.
Sincerely,
Subaru of America, Inc.
A subsidiary of SUBARU CORPORATION
1 Affected Product
Vehicle
MAKE | MODEL | YEAR |
SUBARU | WRX | 2022 |
1 Associated Document
Manufacturer Communications
NUMBER: WRB-22R
DATE: 07/18/22
REVISED: 09/02/22
https://www.nhtsa.gov/recalls?nhtsaId=10222337
MC-10222337-0001.pdf 5233.508KB
NHTSA ID Number: 10216990
Manufacturer Communication Number: WRB-22
Summary
In the interest of customer satisfaction, Subaru of America, Inc. (Subaru) is initiating a new voluntary emissions recall for certain 2022 model year WRX vehicles equipped with a 2.4L turbo engine.
1 Associated Document
Manufacturer Communications
NUMBER: WRB-22
DATE: 07/18/22
https://www.nhtsa.gov/recalls?nhtsaId=10216990
MC-10216990-0001.pdf 5215.042KB
NHTSA ID Number: 10219479
Manufacturer Communication Number: SubaruNet Announ
Summary
In the interest of customer satisfaction, Subaru of America, Inc. (Subaru) is initiating a new voluntary emissions recall for certain 2022 model year WRX vehicles equipped with a 2.4L turbo engine
1 Associated Document
Manufacturer Communications
Date: August 18, 2022
UPDATE Voluntary Emissions Recall: WRB-22 – PCV Vacuum Hose Clamp Lock Failure
https://www.nhtsa.gov/recalls?nhtsaId=10219479
NHTSA ID Number: 10216982
Manufacturer Communication Number: SubaruNet Announ
Summary
(New Voluntary Emissions Recall: WRB 22 – PCV Vacuum Hose Clamp Lock Failure) In the interest of customer satisfaction, Subaru of America, Inc. (Subaru) is initiating a new voluntary emissions recall for certain 2022 model year WRX vehicles equipped with a 2.4L turbo engine.
1 Associated Document
Manufacturer Communications
Date: July 18, 2022
New Voluntary Emissions Recall: WRB-22 – PCV Vacuum Hose Clamp Lock Failure
https://www.nhtsa.gov/recalls?nhtsaId=10216982
- 🎄【Easy to Use--Work out of box】+【FOXWELL 2024 New Version】 FOXWELL NT604 Elite scan tool is the 2024 new version from FOXWELL, which is designed for those car owners who want to figure out the cause issue before fixing the car problem via scanning the most common systems like abs srs engine and transmission.The NT604 Elite diagnostic tool comes with latest software, which can be used out of box. No need to waste time to download the software first.
- 🎅【Affordable】+【Reliable Car Health Monitor】 Will you be confused what happen when the warning light of abs/srs/transmission/check engine flashes? Instead of taking your cars to dealership, this foxwell scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. It will t-urn off the warning light car after the problem is fixed.👉TIPS: Airbag crash/collision data can NOT be cleared even you replace the new airbag.
- 🎄【5 in 1 Diagnostic Scanner】Compared with those auto scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also it can be an abs/srs scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it.
- 🎅【Fantastic AUTOVIN】+【No extra software fee】Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite abs srs scanner supports 60+ car makes from worldwide (America/Asia/Europe). You don’t need to pay extra software fee.
- 🎄【Solid protective case KO plastic carrying bag】+ 【Lifetime update】Almost all same price-level obd scanner diagnostic tool only offers plastic bag to hold on the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
- 5 IN 1 DIAGNOSTIC SCANNER: This is an OBDII scanner and 4 systems diagnostic tool. The AUTOPHIX 3210 PRO Bluetooth Auto Scanner not only has OBDII diagnostic function, but can also be used as an ABS/SRS/transmission scanner and check engine code reader. When it is an OBD2 scanner, you can use it to check if your car is ready for annual test via I/M preparation menu. In addition, the built-in DTC library, live data stream, data playback, performance testing and many more such functions are supported by it.
- RELIABLE CAR HEALTH MONITOR: Are you confused when the ABS/SRS/Transmission/Check Engine warning light is blinking? The AUTOPHIX 3210 PRO Bluetooth Scanner will help you to do a thorough scanning and inspecting of your car and find out the root cause, which saves your time and money. Tip:The warning light will be turned off after the problem is solved. Airbag crash/collision data cannot be cleared, even if you replace the airbag with a new one.
- QUICK DIAGNOSIS: The 3210 PRO is the newest 2024 Enhanced 4-System Bluetooth Code Reader that retrieves vehicle information, reads/clears trouble codes, and displays a 4-in-1 live data stream. You'll easily find out what's wrong with your car. In just a few minutes, you'll be in control of your car!
- EXCLUSIVE APP: Are you tired of the following with third party apps? For example: 1.need to download different apps for different cars? 2. require extra download fees? 3. only support a few functions? 4. can only use one of Android and iOS? Now!One AUTOPHIX 3210 PRO Scanner is enough to solve all the above problems. The must-have wireless/bluetooth automotive diagnostic tool/code reader for today's car owners. iPhone iOS, iPad, Android can be downloaded for free without any additional subscription fees.
- ADVANCED DATA FLOW DISPLAY:AUTOPHIX 3210 PRO Bluetooth code reader allows you to graphically display your vehicle's data flow instead of boring text, including engine coolant temperature, engine RPM, vehicle speed, absolute throttle position, control module voltage, etc. You can view different parameter values corresponding to different times. The advanced data streams provide useful information for entry-level professionals and diyers who can troubleshoot vehicle problems quickly and efficiently.
- 🎉【2024 Upgraded Ver. of AL519/ ML519/ ML619】Autel develops the brand-new AutoLink AL619 as the advanced ver. of Autel ML519, AL519, AL319, MS309. This AL619 OBD2 scanner can scan ABS & SRS systems, and support 10 Modes of OBD II Diagnostics Function on Worldwide Vehicles to read, erase codes and turn off the MIL, ABS, SRS warning lights so that you can better maintain your car when related malfunctions occur and make your vehicle ready for the annual test.
- 🎉【Accurate ABS/ SRS Diagnostics Functions】The ABS/ SRS diagnostic function is used to retrieve and clear codes from the ABS/ SRS systems. It can read and clear DTCs, show definitions of each code, display live data of multiple sensors in the graph to locate fault causes, and assist home mechanics to do the proper repair and clear ABS & Airbag warning lights. Diagnoses ABS/ SRS system codes on most 1996 and newer major vehicle models. Please email 📩 immoautel @ outlook. com 📩 for help.
- 🎉【All 10 Modes of OBD II Diagnostics Function】The OBD II Diagnostics function is a fast-access option that allows you to carry out a quick test on the engine system of OBD II vehicles. Read Codes, Erase Codes, Live Data, Freeze Frame, Retrieving I/M Readiness Status, O2 Monitor Test, On-Board Monitor Test, DTC Lookup, Component Test, Viewing Vehicle Information, Modules Present.
- 🎉【Live Data and Freeze Frame Data】With Live Data functions, Autel AL619 OBD2 diagnostic code reader allows you to view the live PID (Parameter Identification Data) of the vehicle's computer module(s) in text, graph to check the status of various sensors. And Freeze Frame Data enables you to view the vehicle's operating parameters at the moment a DTC is detected. These information will aid the technician by allowing the parameters to be duplicated for diagnostic and repair purposes.
- 🎉【DTC Lookup Feature】Besides showing you the code’s definition while you are reading the diagnostic trouble codes, AL619 features comparably user-friendly DTC Lookup Function which enables you to retrieve the definitions of any error codes from the large database of AL619, saving you from the hassle of wasting time searching definition of every code via Google.
- 2024 Best Choice for ABS Bleeder Scan Tool - Was the brake pedal always slowly sinking down or becoming loose? This abs brake bleeding scan tool will bleed the brake system by cycling the pump and valves to achieve a tight brake pedal. It's the most affordable obd2 scanner with abs auto bleed function you can find. With the clear step by step instruction, even a beginner can use it. Coverage check on FOXWELL official site: Support- Diagnostic Coverage List.
- More Than a Entry Level OBD Scanner, Ideal for Home Mechanics - Based on the NT301 FOXWELL Scanner, NT630 Plus takes OBD diagnostics to the next level by customizing all functions for ABS and SRS systems. This srs abs scanner provides in-depth insights on error code diagnosis, wheel speed sensor live data, airbag circuits and cable connectors monitor, module activation and etc. It's an total game-changer in resolving ABS SRS issues.
- No More Higher End Service than You Needed - One NT630 Plus is enough! This obd2 scanner with abs and srs takes depth diagnosis on Anti-Lock Brake System & Supplemental Restraint System, and also performs daily required resetting services which same priced scanners cannot do. Like Airbag light reset/ SAS(Steering Angle Sensor) adjustment/ Oil light reset functions. this car scanner will help the part to operate normally after the faults repaired.
- Also can Work like NT301 - The NT630 Plus abs code reader connect to the OBD2 port directly. It will diagnose all obd2 modules instantly, displays the live data, locates bad sensors and I/M readiness status before the annual inspection. Guides you to do the maintenance work, reduces the potential driving risk and keep a peak performance on the road.
- Complicate? Unreadable? - Intuitive LCD display with clear operate instructions, even a beginner can diagnose the car faults with the NT630 Plus. Ergonomic Touch with anti-collision and anti-slip cover design, comfortable for daily car diagnose work. Unique button press sound will provide the overall tactile and visual experience to notice you a task has been completed or a command has been executed.
- 【Buy with Confidence】 As a America's No.1 diagnostic tool brand, Innova stands for innovation, quality, and accessibility in the automotive diagnostic industry. We are known for developing cutting-edge diagnostic tools that are user-friendly, reliable, and made for US by Americans.
- 【Unleash Your Drive's Potential】Much more than a car code reader, the 6100P scanner effectively reads and erases engine, ABS, SRS, and transmission codes for popular US car makes such as Ford, Chevy, Dodge, GM, etc. When the traction light is constantly on, the ability to really detect where the problem is concerning brakes and airbags enables you to make sure all safety measures in place before putting yourself in harm's way.
- 【Your Car's Health Doctor】Easily view procedures or send commands for oil change, mileage or driving time reset for most 1996 and newer OBD2 vehicles. It also monitors your oil level and oil life status, ensuring optimal vehicle health.
- 【alternator Test】The Innova 6100P scanner is perfect for assessing the performance of the alternator in your hybrid, car, SUV, minivan, or light truck diesel as well. During rough winters and scorching summers, this diagnostic tool will be invaluable when trying to root out start-up issues.
- 【Drive with Confidence and Peace】Quickly identify if your vehicle needs immediate attention with our Code Severity Levels function. This feature helps you understand whether you need to fix an issue immediately or if it can wait until you get home, keeping warning lights at bay.
- 【Great Ideal For Every Car Owner】Prefect choice for your father, husband, brother or boyfriend. EVERY CAR OWNER WILL NEED IT! It comes with h-igh-quality host with a strong box. Get LAUNCH CRP123 Elite car diagnostic scanner and give your lover a surprise!
- 【 Read & Clear/Reset Engine/ABS/SRS/Transmission Diagnostic Scan Tool 】LAUNCH CRP123 OBD2 Scanner can test Engine, Transmission, ABS and Airbag four systems, also reads and resets code, displays data stream graphic, stores and playbacks dynamic data stream,helps to quick analysis and diagnosis.
- 【 Error Fault Code Reader】Except the full 10 modes OBD2 diagnostic functions like, retrieving I/M readiness, Freeze Frame Data, Read Dynamic Data stream and V-ehicle Information, O2 Sensor Test, EVAP Test of F-uel Tank System (Mode 8) and Advanced On-board Monitoring (Mode 6), launch crp123 obd2 scanner can not only reveal what error codes your car is producing, but also erase your v-ehicle’s check engine light after problem fixed, the DTC help and explanation also tell you the exact problem.
- 【 Live Data Graphing + Read/Record/Playback Data stream + Print diagnostic data 】Live Data Graphing,more intuitive to know your vehicle’s problem.Large size Color Screen ;Print Function:Print the diagnose result easily; with user manual and register & update tutorial video uploaded in the link by us,you can Look up it anytime by ONE-CLICK.
- 【 Find Your Vehicles Here】Launch CRP123 obd2 scanner Supports mainstream vehicles on the world,fit for ACURA VW AUDI AUST FORD BENZ BMW CHRYSLER FIAT GM HOLDEN HONDA HYUNDAI INFINITI JAGUAR ISUZU KIA LANDROVER LEXUS MAZDA MITSUBISHI NISSAN OPEL PORSCHE SAAB SEAT SKODA SMART MERCEDES SPRINTER SUBARU SUZUKI SCION TOYOTA USA FORD VOLVO PEUGEOT CITROEN RENAULT EUROFORD.Etc.
- [ABS & SRS Scanner with Active Test] The ABS/ SRS diagnostic tool Read & clear DTCs, displays live data in a graph to locate the cause of faults and assists the home mechanic with repairs and clearing ABS and airbag warning lights. Active test sensors, valves or solenoids etc. and tracks any threats in real time. It is invaluable to have a diagnostic tool with Active Test feature that you will never find on similar ABS/ SRS scanners.
- 【3 HOP Reset Services 】Easy to set up 3 regular reset services for Oil Light, Battery Management System, and Steering Angle Position. With this obd2 scanner, you can reset the oil service light and reset pre-programmed mileage intervals for energy efficiency; adjust or reset the steering angle position to keep steering aligned; and clear the original low battery fault information. No need to leave home for shop-quality car maintenance.
- 【All OBD2 Test Modes 】 This ABS & SRS scan tool is also a full featured obd2 code reader, allowing a quick test of the engine system of OBD II vehicles, can Read/Clear engine light codes, Live Data, Freeze Frame, Retrieving I/M Readiness Status, O2 Monitor Test, On-Board Monitor Test, Evap Test, Read Vehicle Information, and help pass smog test for most post-1996 OBD2/CAN vehicles.
- [DTC LookUp Library] Can't read the code? Go to the DTC LookUp Library. The Topdon AL600 OBD2 scanner offers a wealth of code definitions so you don't have to look them up in a list or database, and the HELP function takes you to diagnostic tips for possible fixes, saving time searching for repair materials online. No other scan tool or code reader under $100 offers this level of assistance.
- [User-Oriented] You'll love the feel of this automotive scanner, with black rubber grips all around the outer edges for durability and to withstand accidental drops. With its easy access menu, you can operate all functions in minutes with just a few button presses. The 3-color LEDs give you a intuitive indication of the OBD2 test results in a second. 3 shortcut keys, one key to read/clear DTCs and a one-touch smoke status check make it easy to use even for beginners.
- 【Updated New Version AD600】Discover the improved version of TOPDON AD600 OBD2 scanner. Now immerse yourself in a seamlessly diagnostic experience with Android 11.0 OS. With an upgraded 32G ROM, this scan tool offers ample storage and faster performance. The 5-inch display with 1280x720 resolution offers high-definition clarity, ensuring easy readability for every diagnostic detail.
- 【Professional 4 Systems Diagnostics】For car owners dealing with common issues such as engine, transmission, ABS, and SRS, the TOPDON AD600 code scanner delivers professional diagnostic services. It easily reads and clears fault codes, analyzes data streams and more, ensuring a quick identification of problems. Additionally, the DTC Lookup function provides corresponding fault code analysis.
- 【8 Hot Reset Functions】Say goodbye to costly trips to the repair shop for resetting after routine maintenance such as changing oil, replacing tires, or installing new brake pads. The AD600 diagnostic tool effortlessly tackles common automotive challenges with just one click. Cut costs and cut the hassle with its 8 reset functions: Oil/BMS/ABS/SAS/EPB/DPF/TPMS/Throttle.
- 【Support for 10,000+ Car Models】The upgraded AD600 car scanner now supports 67+ global brands and 10,000+ models, ensuring compatibility with a diverse range of vehicles. Whether American, German, French, or Japanese, the AD600 diagnostic scanner has you covered. (Note: Contact TOPDON customer service for vehicle compatibility inquiries before purchase).
- 【Lifetime Free Updates】The AD600 diagnostic tool offers a lifetime of free upgrades with convenient one-click updates via Wi-Fi. Our dedicated TOPDON technical team continuously enhances our product's software, providing users with expanded vehicle support and an improved user experience through regular updates.
- [Transform Your Car Care Experience] - With BLCKTEC, instantly become your own professional mechanic. Effortlessly read and clear your car’s trouble codes and check engine light, ensuring your vehicle stays in top condition.
- [Empower Yourself with Comprehensive Diagnostics] - Unlock the full potential of your vehicle with the BLCKTEC 430. Access detailed diagnostics previously exclusive to professional mechanics’ OBD2 scan tools, including ABS, Airbag, SRS, TPMS codes, and beyond, right at your fingertips.
- [Drive with Confidence] - The BLCKTEC 430 is more than just a car code reader; it's your personal vehicle health advisor. Receive tailored repair reports with potential causes and verified solutions for your specific make and model, guiding you to the right fix every time.
- [Seamless Connectivity, Ultimate Convenience] - Experience the freedom of wireless diagnostics with this portable car scanner. Easily connect via Bluetooth to our intuitive sensor, and enjoy all the functionalities of high-end scan tools without the clutter of wires, directly from your smartphone or tablet.
- [DIY Repairs Made Easy] - Navigate car maintenance with ease using our premium app. Access a vast library of easy-to-follow repair videos, guiding you through each step of the repair process, compatible with both iOS & Android devices.
- 💻Note: (About UPDATE) ANCEL FX2000 car scanner diasgnostic tool can be used directly as it comes with existed software, You don't need to register or update beforethe first use. It's recommended to update your scanner only when it fails to work on your car, or it's slow to load all menus or if you need newer software version. 📢Software update supports WIN XP, 7, 8, 10 operation systems only., but not for Mac and ios system.
- 🔧【PLUG AND PLAY - EASY TO USE】 : ANCEL FX2000 car scanner only takes 3 steps to connect to the car for diagnosis without cumbersome operations. The latest FX2000 scan tool is equipped with a one-key diagnosis function, which can automatically identify the model and year of your car, and automatically diagnose the car. Even beginners can use it to read the data and find out what the fault codes mean.
- 🚗【FULL OBD-LEVEL DIAGNOSTICS TOOL】: Quickly determines the cause of engine system faults, reads current, permanent and pending codes. After the repair, clears the codes and turns off the warning light. In addition, the FX2000 engine code reader also displays important OBD II advanced data such as fuel, live data and other manufacturer-specific parameters in real time to ensure that the engine ECU is operating correctly and safely, saving vehicle owners a lot of time and money in maintenance.
- 🚙【TRANSMISSION FAULT DIAGNOSTIC TOOL】: Some noises come from the transmission? Ancel obd2 scanner will read fault codes, display live transmission system data (fluid temperature, fluid pump, clutch actuation, pressure, etc.), and ensures transmission performance is optimal for vehicle speed and load. It provides detailed TCM data of the vehicle, so you can quickly and accurately find existing or potential problems.
- 🚐【FIND OUT SRS WRONG】: ANCEL FX2000 automotive scanner is able to read and clear fault codes in the SRS (airbag) and turn off the warning light to make sure the system is working correctly and safely. This odb2 scanner also displays a live graphical data stream of the supplemental restraint system (air bag), which allows you to analyze and verify that the air bag system is working properly.
Last update on 2024-04-01 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
Bulletin Number: WRB-22R; Revised: 09/02/22 Page 1 of 11 SERVICE PROGRAM BULLETIN Continued… CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS. Subaru Service Bulletins are intended for use by professional technicians ONLY. They are written to inform those technicians of conditions that may occur in some vehicles, or to provide information that could assist in the proper servicing of the vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do the job correctly and safely. If a condition is described, DO NOT assume that this Service Bulletin applies to your vehicle, or that your vehicle will have that condition. Subaru of America, Inc. is ISO 14001 Compliant ISO 14001 is the international standard for excellence in Environmental Management Systems. Please recycle or dispose of automotive products in a manner that is friendly to our environment and in accordance with all local, state and federal laws and regulations. NUMBER: WRB-22R DATE: 07/18/22 REVISED: 09/02/22 APPLICABILITY: 2022 MY WRX SUBJECT: PCV Vacuum Hose Clamp Lock Failure In the interest of customer satisfaction, Subaru of America, Inc. (Subaru) is initiating a new voluntary emissions recall for certain 2022 model year WRX vehicles equipped with a 2.4L turbo engine. REASON FOR THIS VOLUNTARY EMISSIONS RECALL The affected vehicles may contain a hose clamp securing the upper connection of the PCV vacuum hose (blow-by hose) which may not have been fully locked during assembly. DESCRIPTION OF THE REPAIR Subaru retailers will inspect the hose clamp securing the upper connection of the PCV vacuum hose (blow-by hose) and, if necessary, adjust the hose clamp to a fully locked condition at no cost to the customer. Affected Vehicles The number of U.S. vehicles included in this service program is 5,837. Model Year Carline Production date range 2022 WRX January 21, 2022 – May 12, 2022 Not all vehicles in the production date range listed above may be included in this voluntary emissions recall. Coverage for all affected vehicles must be confirmed by using the Vehicle Coverage Inquiry function on subarunet.com. Retailer Responsibility Please be advised that it is a violation of Federal law for a dealer to deliver a new motor vehicle covered by a recall under a sale or lease until the defect is remedied. Therefore, any Authorized Subaru Retailer failing to perform the applicable service procedures to correct all affected vehicles in their inventory prior to the vehicle being placed in service may be subject to civil penalties of up to $22,423 per violation (i.e., for each vehicle), as provided in 49 CFR §578.6 and will also be in breach of the Subaru Dealer Agreement. ATTENTION: GENERAL MANAGER q PARTS MANAGER q CLAIMS PERSONNEL q SERVICE MANAGER q IMPORTANT – All Service Personnel Should Read and Initial in the boxes provided, right. ©2022 Subaru of America, Inc. All rights reserved. Bulletin Number: WRB-22R; Revised: 09/02/22 Page 2 of 11 Continued… Any vehicles listed in any recall/campaign that are in retailer stock must be: • Immediately identified • Tagged or otherwise marked to prevent their delivery or use prior to repair • Repaired in accordance with the repair procedures outlined in the bulletin Retailers are to promptly perform the applicable service procedures, to correct all affected vehicles in their inventory (used, demo & SSLP). Whenever a vehicle subject to this voluntary emissions recall is taken into retailer inventory necessary steps should be taken to ensure the correction has been made before selling or releasing the vehicle. Owner Notification Subaru will notify affected vehicle owners by first class mail in August. Retailers will be advised when the notification is scheduled. DESCRIPTION OF CONCERN: 1 Bulletin Number: WRB-22R; Revised: 09/02/22 Page 3 of 11 Continued… PART INFORMATION: REMINDER: Always order the most up-to-date replacement parts based on the specific VIN being repaired. Part Description Part Number HOSE CLAMP 805919150 IMPORTANT NOTE: The hose clamp will ONLY require replacement if it is found to have excessive damage and cannot be secured. REQUIRED TOOLS: 35-45° Bent Long-Neck Needle Nose Pliers will be required to perform the procedures outlined below. NOTE: The Snap On® 11” Talon Grip™ Long-Neck 35° Bent Needle Nose Pliers (#411CF) are a usable suggestion. Bulletin Number: WRB-22R; Revised: 09/02/22 Page 4 of 11 Continued… SERVICE PROCEDURE OUTLINE: Bulletin Number: WRB-22R; Revised: 09/02/22 Page 5 of 11 Continued… SERVICE PROCEDURE / INFORMATION: REMINDER: Customer satisfaction and retention starts with performing quality repairs. STEP 1: Remove the two mounting fasteners and then removed the intake duct. STEP 2: Perform a visual inspection of the hose clamp claw positioning from the small opening within the clamp. Bulletin Number: WRB-22R; Revised: 09/02/22 Page 6 of 11 Continued… Examples of Hose Clamp Claw Conditions IMPORTANT NOTE: The hose clamp direction may be in the opposite direction of those pictured in the examples below. STEP 3: Adjusting the hose clamp position. • Position the clamp evenly 3mm (0.12 inch) from the top the hose. • Make sure the lock portion is facing the front of the vehicle. Bulletin Number: WRB-22R; Revised: 09/02/22 Page 7 of 11 Continued… STEP 4: Using 35-45° bent long-neck needle nose pliers, squeeze the clamp at the two points indicated with arrows below. Confirm the lock portion is hooked properly onto the claw. STEP 5: Using 35-45° bent long-neck needle nose pliers, squeeze the lock portion of the clamp, and confirm it is fully locked. Bulletin Number: WRB-22R; Revised: 09/02/22 Page 8 of 11 Continued… STEP 6: Confirm the clamp is fully locked by visually inspecting the claw position as shown in the image below. IMPORTANT CAUTIONS: • If the clamp (805919150) is damaged or broken it MUST be replaced with a new part. • If replacement is required, ONLY the upper side of the PCV Vacuum Hose needs to be disconnected. Use caution to not damage any surrounding hoses and/or harnesses. STEP 7: Install the intake duct and the two mounting fasteners. CLAIM REIMBURSEMENT AND ENTRY PROCEDURES: Credit to perform this recall will be based on properly completed repair order information. Retailers may submit claims through Subarunet.com. Labor Description Labor Operation # Labor Time Fail Code INPECTION OF THE PCV VACUUM HOSE CLAMP AND ADJUSTMENT TO A FULLY LOCKED CONDITION A456-233 0.3 WRB-22 CALIFORNIA “VEHICLE EMISSION RECALL – PROOF OF CORRECTION” CERTIFICATE The California Air Resources Board and the Department of Motor Vehicles Registration/Recall Program requires that all emission related Recall/Campaign or Service Program repairs be completed before a vehicle registration is renewed. Please provide owners of vehicles registered in the state of California a completed “Vehicle Emission Recall – Proof of Correction” certificate. Vehicle owners should be advised to retain this certificate because the California Department of Motor Vehicles may require they provide proof this service program repair has been completed. Additional certificates are available through normal parts ordering channels using part number MSA6P1301. Quantity 1 = 1 booklet of 50 certificates. Bulletin Number: WRB-22R; Revised: 09/02/22 Page 9 of 11 Continued… IMPORTANT REMINDERS: • SOA strongly discourages the printing and/or local storage of service information as previously released information and electronic publications may be updated at any time. • Always check for any open recalls or campaigns anytime a vehicle is in for servicing. • Always refer to STIS for the latest service information before performing any repairs. Bulletin Number: WRB-22R; Revised: 09/02/22 Page 10 of 11 Subaru Service Program WRB-22 Voluntary Emissions Recall August 2022 This notice applies to the VIN identified in the address section printed below Dear Subaru Owner: We would like to thank you for your selection of a Subaru vehicle. We take pride in our products and are committed to your continued satisfaction. Subaru of America, Inc. (Subaru) is initiating a new voluntary emissions recall for certain 2022 model year WRX vehicles equipped with a 2.4L turbo engine. You have received this notice because our records indicate that you currently own one of these vehicles. REASON FOR THIS VOLUNTARY EMISSIONS RECALL Your vehicle may contain a hose clamp securing the upper connection of the PCV vacuum hose (blow-by hose) which may not have been fully locked during assembly. REPAIR Your Subaru retailer (dealer) will inspect the hose clamp securing the upper connection of the PCV vacuum hose (blow-by hose) and, if necessary, adjust the hose clamp to a fully locked condition at no cost to you. WHAT YOU SHOULD DO You should immediately contact your Subaru retailer for an appointment to have repair performed. HOW LONG WILL THE REPAIR TAKE? The actual time to perform this repair is less than twenty minutes. Your retailer can provide you with a better estimate of the overall time for this service visit, as it may be necessary to make your vehicle available for a longer period of time for scheduling purposes. CALIFORNIA REGISTERED OWNERS The California Air Resources Board requires that emission-related campaigns be completed prior to California’s vehicle registration renewal process; without this repair, you will not be able to register your vehicle during your next annual registration. Upon completion of this campaign, your California dealer will complete and provide you a “Proof of Correction Certificate.” If required, present the certificate to the California Department Continued… Bulletin Number: WRB-22R; Revised: 09/02/22 Page 11 of 11 of Motor Vehicles (the “DMV”) when renewing your California registration as proof of campaign completion. If the DMV does not request the certificate, we recommend that you keep it for your records. In addition, the State of California requires that every vehicle must pass an emission test (SMOG Check) every two years and before it is sold. Without the service we are providing at no charge, your vehicle may not pass this test. CHANGED YOUR ADDRESS OR SOLD YOUR SUBARU? If you have moved or sold your vehicle, please go to https://www.subaru.com/support/ customer-support.html to send us your information. IF YOU NEED FURTHER ASSISTANCE: To locate the nearest Subaru retailer, you can access our website at www.subaru.com and select ‘Find a Retailer.’ For additional information, please go to: http://www.wra22.service-campaign.com. If you need additional assistance, please contact us directly: • By e-mail: Go to https://www.subaru.com/subaru-email-us.html • By telephone: 1-844-373-6614 Monday through Friday between 8:00 a.m. and 7:00 p.m. ET • By U.S. Postal mail: Write us at Subaru of America, Inc., Attn: Customer Advocacy Department, P.O. Box 9103, Camden, NJ 08101-9877 Please contact us immediately if the Subaru retailer fails or is unable to make the necessary repairs free of charge. Your continued satisfaction with your Subaru is important to us. Please understand that we have taken this action in the interest of your vehicle’s proper operation. We sincerely apologize for any inconvenience this matter may cause and urge you to schedule an appointment as soon as possible to have this repair performed. Sincerely, Subaru of America, Inc. A subsidiary of SUBARU CORPORATION
**************************************************************************************************************
Subarunet Announcement To: All Subaru Retailers From: Subaru of America, Inc. Date: July 18, 2022 New Voluntary Emissions Recall: WRB-22 – PCV Vacuum Hose Clamp Lock Failure In the interest of customer satisfaction, Subaru of America, Inc. (Subaru) is initiating a new voluntary emissions recall for certain 2022 model year WRX vehicles equipped with a 2.4L turbo engine. Reason for this Voluntary Emissions Recall The affected vehicles may contain a hose clamp securing the upper connection of the PCV vacuum hose (blow-by hose) which may not have been fully locked during assembly. Affected Vehicles The number of U.S. vehicles included in this service program is 5,837. Not all vehicles in the production date range listed above may be included in this voluntary emissions recall. Coverage for all affected vehicles must be confirmed by using the Vehicle Coverage Inquiry function on subarunet.com. This information is now available. Description of the Repair Subaru retailers will inspect the hose clamp securing the upper connection of the PCV vacuum hose (blow-by hose) and, if necessary, adjust the hose clamp to a fully locked condition at no cost to the customer. Retailer Responsibility Any vehicles listed in any recall or campaign that are in retailer stock must be: • Immediately identified • Tagged or otherwise marked to prevent their delivery or use prior to repair • Repaired in accordance with the repair procedures outlined in the Bulletin Retailers are to promptly perform the applicable service procedures, to correct all affected vehicles in their inventory (new, used, demo & SSLP). Additionally, whenever a vehicle subject to this service program is taken into inventory or in for service, necessary steps should be taken to ensure the repair has been made before selling or releasing the vehicle. Owner Notification Owners will be notified by first class mail in August. Retailers will be advised when the notification is scheduled. Service and Claim Information Please refer to the WRB-22 Service Program Bulletin on STIS for detailed service and claim information. Model Year Carline Production date range 2022 WRX January 21, 2022 – May 12, 2022
**************************************************************************************************************
Subarunet Announcement To: All Subaru Retailers From: Subaru of America, Inc. Date: August 18, 2022 UPDATE Voluntary Emissions Recall: WRB-22 – PCV Vacuum Hose Clamp Lock Failure Owner Notification Owner notification letters were issued on August 17, 2022. A copy of the letter will be included in the WRB22 Service Program Bulletin on STIS. In the interest of customer satisfaction, Subaru of America, Inc. (Subaru) is initiating a new voluntary emissions recall for certain 2022 model year WRX vehicles equipped with a 2.4L turbo engine. Reason for this Voluntary Emissions Recall The affected vehicles may contain a hose clamp securing the upper connection of the PCV vacuum hose (blow-by hose) which may not have been fully locked during assembly. Affected Vehicles The number of U.S. vehicles included in this service program is 5,837. Not all vehicles in the production date range listed above may be included in this voluntary emissions recall. Coverage for all affected vehicles must be confirmed by using the Vehicle Coverage Inquiry function on subarunet.com. This information is now available. Description of the Repair Subaru retailers will inspect the hose clamp securing the upper connection of the PCV vacuum hose (blow-by hose) and, if necessary, adjust the hose clamp to a fully locked condition at no cost to the customer. Retailer Responsibility Any vehicles listed in any recall or campaign that are in retailer stock must be: • Immediately identified • Tagged or otherwise marked to prevent their delivery or use prior to repair • Repaired in accordance with the repair procedures outlined in the Bulletin Retailers are to promptly perform the applicable service procedures, to correct all affected vehicles in their inventory (new, used, demo & SSLP). Additionally, whenever a vehicle subject to this service program is taken into inventory or in for service, necessary steps should be taken to ensure the repair has been made before selling or releasing the vehicle. Service and Claim Information Please refer to the WRB-22 Service Program Bulletin on STIS for detailed service and claim information. Model Year Carline Production date range 2022 WRX January 21, 2022 – May 12, 2022
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END