Subaru Recalls, Technical Service Bulletins TSB's, Diagnostic & Repair Tips
NUMBER: 11-163-16 DATE: 04-15-16 APPLICABILITY: 2015-16MY STI
Models SUBJECT: Reduced Engine Performance at High Ambient Temperatures INTRODUCTION This bulletin announces availability of reprogramming files for optimization of the ECM. The files will address customer concerns of a lack of engine power output resulting from reduced turbocharger boost at high ambient temperatures while using 91 octane … Read more
NUMBER: 11-162-16R DATE: 04-05-16 REVISED: 04-21-16 APPLICABILITY: 2015MY Legacy and Outback Models SUBJECT: Reprogramming File Availability for Extended Engine Cranking (Delayed Starting) and Engine Oil Level Detection Improvement INTRODUCTION This bulletin announces availability of reprogramming files to address customer concerns of extended cranking time before the engine starts. These files also optimize the ECM for improved … Read more
NHTSA ID Number: 10120966 Manufacturer Communication Number: 11-161-16 Summary This bulletin announces the availability of new reprogramming files for optimizing the ECM to address the following customer concern: 2 Affected Products Vehicles MAKE MODEL YEAR SUBARU FORESTER 2015 SUBARU WRX 2015 SERVICE BULLETIN NUMBER: 11-161-16 DATE: 02/29/16 APPLICABILITY: 2015 WRX and Forester … Read more
NHTSA ID Number: 10120975 Manufacturer Communication Number: 10-84-16R Summary This bulletin announces the availability of a new Air Conditioning compressor / clutch assembly to address customer concerns of the system not operating. Electrical windings located inside the clutch assembly have been changed to eliminate the condition. The service procedure will involve replacement of the A/C compressor and … Read more
NUMBER: 07-101-15 DATE: 11/20/15 APPLICABILITY: 2015MY Outback Models with Power Rear Gate (PRG) SUBJECT: Logic Change to Power Rear Gate Control Module INTRODUCTION This bulletin announces a logic change to the PRG control module designed to help protect the gate latch and actuator assembly from damage. If the operator tries to re-open the PRG manually … Read more
