Intermittent Wiper Operation with Switch in Off Position – 2010-2012 Subaru Legacy & Outback

NUMBER: 07-91-15 DATE: 06/15/15 APPLICABILITY: 2010-12MY Legacy and Outback Models SUBJECT: Intermittent Wiper Operation with Switch in Off Position     INTRODUCTION This bulletin announces a replacement wiper switch assembly to address customer concerns of the wipers not parking correctly or moving intermittently, even when the control switch is off.  Testing revealed moisture being retained in … Read more

Service Manual Corrections – 2007-2015 Subaru

NUMBER: 18-181-15 DATE: 06/03/15 APPLICABILITY: 2013-2015MY BRZ 2013 & 2015MY Forester 2012-2015MY Impreza 2007, 2010-2015MY Legacy & Outback 2008-2014MY Tribeca SUBJECT: Service Manual Corrections     INTRODUCTION The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site. The tables … Read more

Design Change to Retaining Clip for Front ABS Wheel Speed Sensor – 2010-2014 Subaru Legacy & Outback

NUMBER: 06-49-15R DATE: 05/29/15 REVISED: 02/08/16   APPLICABILITY: 2010-14MY Legacy and Outback Models SUBJECT: Design Change to Retaining Clip for Front ABS Wheel Speed Sensor   INTRODUCTION In response to isolated reports of cracked or broken ABS wheel speed sensor harness retaining clips caused by reaction with acids used in some wheel cleaners, the clip material … Read more

Design Change to Stop Light Switch – 2008-2014 Subaru

NUMBER: 06-48-15R DATE: 05/15/15 REVISED: 10/12/15   APPLICABILITY: 2014MY Forester 2008 -14MY WRX and STI 2012-14MY Impreza 2.0L 2013 -14MY XV Crosstrek (EXCEPT Hybrid Model) SUBJECT: Design Change to Stop Light Switch   INTRODUCTION This bulletin announces a design change to the stop light switch to reduce the possibility of improper illumination of the ABS … Read more

Revised Cylinder Block Measuring Procedures – 2011 and Later Subaru

NUMBER: 02-160-15 DATE: 04/23/15 APPLICABILITY: All Models with FA and FB Engines, 2011MY and Later SUBJECT: Revised Cylinder Block Measuring Procedures     INTRODUCTION This Service Information bulletin provides revised procedures for inspection and measurement of the cylinder block assembly to determine whether or not replacement is necessary.  Read through and understand this information completely before … Read more