NHTSA ID Number: 10161829 Manufacturer Communication Number: 07-154-19 Summary This Service Information bulletin provides a revised Step to follow when diagnosing a DTC B2513- LATCH CONDITION FAILURE. The number of wiring checks found in Step 9 has been reduced from six to three as shown in the illustration below. The Service Manual will be updated with these … Read more
NHTSA ID Number: 10161826 Manufacturer Communication Number: 07-143-18R Summary This bulletin announces a change made to the PRG control module. This change is in response to a limited number of customer concerns regarding the PRG reversing direction before reaching the fully open position. The control module senses that an object is caught in the PRG and engages … Read more
NHTSA ID Number: 10188158 Manufacturer Communication Number: 07-155-19R Summary This bulletin replaces TSB 07-143-18R and announces additional changes made to the PRG control module. These changes are in response to a limited number of customer concerns regarding the rear gate not opening when operating the gate mounted switch, dashboard switch or the rear gate button on the … Read more
NHTSA ID Number: 10232531 Manufacturer Communication Number: 077613R Summary Initialization Procedure for Power Rear Gate (PRG) System when PRG is inoperative with or without DTCs NUMBER: 07-76-13R DATE: 07/01/13 REVISED: 07/08/13 APPLICABILITY: 2014MY Forester Models SUBJECT: Initialization Procedure for Power Rear Gate (PRG) System when PRG is inoperative with or without DTCs DTCs B2500, B2501, B2507, … Read more
NHTSA ID Number: 10233429 Manufacturer Communication Number: 078013R Summary Power Rear Gate (PRG) Inoperative, Incomplete Initialization Procedure NUMBER: 07-80-13R DATE: 10/31/13 REVISED: 03/13/14 APPLICABILITY: 2014 Forester Models SUBJECT: Power Rear Gate (PRG) Inoperative, Incomplete Initialization Procedure INTRODUCTION This bulletin provides additional information (see TSB 07-76-13R dated 7/8/2013) regarding the PRG system operation and initialization procedure. … Read more