NUMBER: 07-96-15 DATE: 08/10/15 APPLICABILITY: 2012-14MY WRX Models (EXCEPT STI) 2012-13MY Forester Turbo SUBJECT: Design Change to Engine Wiring Harness INTRODUCTION This Service Information bulletin reviews a design change to the engine wiring harness to eliminate improper diagnosis of the Evaporative Leak Check Module (ELCM) by the ECM which could set Diagnostic Trouble Code … Read more
NUMBER: 07-95-15 DATE: 08/06/15 APPLICABILITY: 2015MY WRX SUBJECT: Design Change to Engine Wiring Harness INTRODUCTION This Service Information bulletin announces a design change to the engine wiring harness to prevent water intrusion and accumulation from occurring inside the corrugated plastic harness tubing. In some cases, this accumulation may cause a Check Engine Light to … Read more
NHTSA ID Number: 10092532 Manufacturer Communication Number: 15-184-15R Summary THIS BULLETIN REVIEWS TWO POSSIBLE CAUSES FOR A PLEASE CHECK AUDIO SYSTEM MESSAGE TO APPEAR IN THE MFD ON THE ABOVE LISTED VEHICLES. IT IS VERY IMPORTANT TO INTERVIEW THE CUSTOMER CAREFULLY TO DETERMINE WHICH REPAIR IS REQUIRED. PLEASE READ THE SERVICE PROCEDURE PORTION OF THIS BULLETIN THOROUGHLY … Read more
NUMBER: 12-187-15 DATE: 07/27/15 APPLICABILITY: 2015MY WRX and STI Models SUBJECT: Design Change to Trunk Latch Assembly INTRODUCTION This bulletin announces a design change to enhance the operation of the trunk latch mechanism and prevent it from releasing immediately after closing. PRODUCTION CHANGE INFORMATION: The new latch assembly was incorporated into production on … Read more
NUMBER: 09-59-14R DATE: 11/18/14 REVISED: 07/27/15 APPLICABILITY: 2015MY WRX Models with 2.0L DIT Engine 2015MY Legacy and Outback 2.5L SUBJECT: Rust Treatment Procedure for Heat Shield Retaining Bolt Heads INTRODUCTION This bulletin provides a treatment procedure to address a customer concern of rust developing on the front exhaust pipe heat shield retaining bolt heads as … Read more