Uneven Gap between Dash Pad and Center Air Vent Grille – 2013-2014 Subaru BRZ

NUMBER: 12-171-15 DATE: 07/27/15 APPLICABILITY: 2013-14MY BRZ SUBJECT: Uneven Gap between Dash Pad and Center Air Vent Grille   INTRODUCTION This bulletin will address customer concerns of an uneven gap appearing between the top of the center dash air vent grille and the instrument panel dash pad directly above it.  The photo below shows the uneven … Read more

Interference between the Fender and Side Marker Lamp – 2013 Subaru BRZ

NUMBER: 07-94-15 DATE: 07/23/15 APPLICABILITY: 2013MY BRZ SUBJECT: Interference between the Fender and Side Marker Lamp   INTRODUCTION This bulletin provides a repair procedure to address concerns of contact between the top horizontal edge of the side marker lamp and the corresponding fender edge as shown in the photo to the right.     PART INFORMATION … Read more

Service Manual Corrections – 2007-2015 Subaru

NUMBER: 18-181-15 DATE: 06/03/15 APPLICABILITY: 2013-2015MY BRZ 2013 & 2015MY Forester 2012-2015MY Impreza 2007, 2010-2015MY Legacy & Outback 2008-2014MY Tribeca SUBJECT: Service Manual Corrections     INTRODUCTION The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site. The tables … Read more

Design Change to Retaining Clip for Front ABS Wheel Speed Sensor – 2010-2014 Subaru Legacy & Outback

NUMBER: 06-49-15R DATE: 05/29/15 REVISED: 02/08/16   APPLICABILITY: 2010-14MY Legacy and Outback Models SUBJECT: Design Change to Retaining Clip for Front ABS Wheel Speed Sensor   INTRODUCTION In response to isolated reports of cracked or broken ABS wheel speed sensor harness retaining clips caused by reaction with acids used in some wheel cleaners, the clip material … Read more

Design Change to Stop Light Switch – 2008-2014 Subaru

NUMBER: 06-48-15R DATE: 05/15/15 REVISED: 10/12/15   APPLICABILITY: 2014MY Forester 2008 -14MY WRX and STI 2012-14MY Impreza 2.0L 2013 -14MY XV Crosstrek (EXCEPT Hybrid Model) SUBJECT: Design Change to Stop Light Switch   INTRODUCTION This bulletin announces a design change to the stop light switch to reduce the possibility of improper illumination of the ABS … Read more