Impreza

Revised Brake Light Switch Adjustment Procedure for DTCs C1531 and C0054 – 2008-2016 Subaru

by
Subaru Logo

NHTSA ID Number: 10093625 Manufacturer Communication Number: 06-46-14R Summary THIS BULLETIN PROVIDES A REVISED ADJUSTMENT PROCEDURE TO BE USED WHEN DIAGNOSING BRAKE LIGHT SWITCH (BLS) -RELATED DTCS C1531 AND/OR C0054. IF THE BLS IS OUT OF ADJUSTMENT, THE ABS AND/OR VDC WARNING LAMP MAY ILLUMINATE.   NUMBER: 06-46-14R DATE: 04/22/14 REVISED: 10/12/15 APPLICABILITY: 2014MY and Later Forester … Read more

“Popping” Sound from Front Strut Mounts on Low Speed Turns – 2012-2016 Subaru

by
Subaru Logo

NHTSA ID Number: 10140502 Manufacturer Communication Number: 05-61-16 Summary This bulletin announces a design change to the front strut mounts intended to address customer concerns of a popping-type sound which may be heard when making low speed turns.   NUMBER: 05-61-16 DATE: 04/12/16 APPLICABILITY: 2012-2016MY Impreza 2.0L Models 2013-2016MY XV Crosstrek 2015-2016MY WRX and WRX STI 2014-2016MY … Read more

Rattling Sound from Rear Package Shelf Area – 2012-2015 Subaru

by

NUMBER: 12-189-15 DATE: 09/23/15 APPLICABILITY: 2012-14MY Impreza 2.0L Models 2015MY WRX and STI Models SUBJECT: Rattling Sound from Rear Package Shelf Area   INTRODUCTION This bulletin provides information about changes made to the rear shelf trim to address customer concerns of a rattling sound heard while driving over bumpy / rough roads.  The sources of … Read more

Service Procedure for DTC C0075- 2010-2015 Subaru

by

NUMBER: 06-52-15 DATE: 09/23/15 APPLICABILITY: 2010-14MY Legacy and Outback Models 2012-15MY Impreza 2.0L and XV Crosstrek Models SUBJECT: Service Procedure for DTC C0075   INTRODUCTION This bulletin provides an inspection and adjustment procedure to address a DTC C0075 which may be stored in the Vehicle Dynamics Control and Hydraulic Control Unit (VDCCM&HCU).  The DTC relates … Read more

Engine Oil Pressure Switch – 2003-2016 Subaru

by
2016 Subaru Legacy

NHTSA ID Number: 10093105 Manufacturer Communication Number: 02-162-15R Summary “THIS SERVICE INFORMATION BULLETIN ANNOUNCES A DESIGN CHANGE TO THE OIL PRESSURE SWITCH ASSEMBLY. NICKEL PLATING HAS BEEN APPLIED TO THE INTERNAL SWITCH CONTACTS TO ENHANCE THEIR DURABILITY AND REDUCE THE POSSIBILITY OF POOR CONTACT WHICH COULD AFFECT OPERATION OR CAUSE IMPROPER ILLUMINATION OF THE OIL PRESSURE WARNING … Read more