2014 Exchange Component Identification and Procedures – 2014 Subaru

Subaru Logo

NUMBER: 15-168-13R DATE: 08/09/13 REVISED: 09/11/15 APPLICABILITY: 2014MY Subaru Vehicles SUBJECT: 2014 Exchange Component Identification and Procedures   INTRODUCTION This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. The exchange program policy can also be found in Sections 8.4.9 and 11.2.10 of your Service … Read more

Rattle or Buzzing Sound from “A” Pillar Trim – 2012-2015 Subaru

Subaru Logo

NUMBER: 12-157-13R DATE: 10/28/13 REVISED: 05/07/15 APPLICABILITY: 2012-13MY Impreza 2.0L Models 2013MY XV Crosstrek 2014-15MY Forester SUBJECT: Rattle or Buzzing Sound from “A” Pillar Trim   INTRODUCTION This bulletin provides a repair procedure to address a customer concern of a rattle or buzzing-type sound coming from the lower portion of the “A” pillar trim while … Read more

Fuel Pressure Gauge Hose Set (J-49863-1) Modification – Subaru

NUMBER: 14-21-15 DATE: 05/06/15 REVISED: 05/11/15 APPLICABILITY: All Models SUBJECT: Fuel Pressure Gauge Hose Set (J-49863-1) Modification       INTRODUCTION This Service Information bulletin outlines a procedure to modify the fuel hose assembly included in the fuel pressure testing kit, Subaru Special Tool number J-49863-1.  For the fuel pressure gauge to operate properly and provide … Read more

New Electric Power Steering (EPS) Control Unit for DTC C2532 – 2012-2017 Subaru

Subaru Logo

NHTSA ID Number: 10153182 Manufacturer Communication Number: 04-24-18 Summary This bulletin announces a new Electronic Power Steering (EPS) control module for the models listed above. These new EPS control modules address a limited number of customer concerns regarding increased steering effort which may occur during freezing temperatures after a cold start. The cause has been identified as … Read more

Revised Cylinder Block Measuring Procedures – 2011 and Later Subaru

NUMBER: 02-160-15 DATE: 04/23/15 APPLICABILITY: All Models with FA and FB Engines, 2011MY and Later SUBJECT: Revised Cylinder Block Measuring Procedures     INTRODUCTION This Service Information bulletin provides revised procedures for inspection and measurement of the cylinder block assembly to determine whether or not replacement is necessary.  Read through and understand this information completely before … Read more