NUMBER: 07-94-15 DATE: 07/23/15 APPLICABILITY: 2013MY BRZ SUBJECT: Interference between the Fender and Side Marker Lamp INTRODUCTION This bulletin provides a repair procedure to address concerns of contact between the top horizontal edge of the side marker lamp and the corresponding fender edge as shown in the photo to the right. PART INFORMATION … Read more
NHTSA ID Number: 10091972 Manufacturer Communication Number: 07-92-15 Summary THIS SERVICE INFORMATION BULLETIN ANNOUNCES A DESIGN CHANGE TO THE REAR COMBINATION LAMPS TO ADDRESS CUSTOMER CONCERNS OF FOGGING OR CONDENSATION ACCUMULATING ON THE INSIDE SURFACE OF THE LENS. SIX ADDITIONAL BREATHING HOLES HAVE BEEN ADDED TO THE BODY OF THE LAMP ASSEMBLY. THE ADDITIONAL HOLES ARE INTENDED … Read more
NUMBER: 07-91-15 DATE: 06/15/15 APPLICABILITY: 2010-12MY Legacy and Outback Models SUBJECT: Intermittent Wiper Operation with Switch in Off Position INTRODUCTION This bulletin announces a replacement wiper switch assembly to address customer concerns of the wipers not parking correctly or moving intermittently, even when the control switch is off. Testing revealed moisture being retained in … Read more
NUMBER: 12-185-15R DATE: 05/21/15 REVISED: 01/07/2016 APPLICABILITY: 2015-2016MY Legacy and Outback Models SUBJECT: Wind “Rushing” or “Fluttering” Sound from “B” Pillar Area INTRODUCTION This bulletin provides a repair procedure to address a wind rushing and / or fluttering-type sound originating from the “B” pillar area of the vehicle. The sound is usually reported to be … Read more
NHTSA ID Number: 10234277 Manufacturer Communication Number: 1519216 Summary Loose / Gapping Accessory Front Wheel Arch Moldings NUMBER: 15-192-16 DATE: 01/14/16 APPLICABILITY: 2015-16MY Outback SUBJECT: Loose / Gapping Accessory Front Wheel Arch INTRODUCTION: This bulletin provides a service procedure to address customer concerns of loose or gapping accessory front wheel arch molding(s) (E201SAL000 Molding Kit). … Read more
