“Please Check Audio System” Message – 2014-2015 Subaru

2015 Subaru Forester

NHTSA ID Number: 10092532 Manufacturer Communication Number: 15-184-15R Summary THIS BULLETIN REVIEWS TWO POSSIBLE CAUSES FOR A “PLEASE CHECK AUDIO SYSTEM” MESSAGE TO APPEAR IN THE MFD ON THE ABOVE LISTED VEHICLES. IT IS VERY IMPORTANT TO INTERVIEW THE CUSTOMER CAREFULLY TO DETERMINE WHICH REPAIR IS REQUIRED. PLEASE READ THE SERVICE PROCEDURE PORTION OF THIS BULLETIN THOROUGHLY … Read more

Design Change to Trunk Latch Assembly – 2015 Subaru WRX & STI

NUMBER: 12-187-15 DATE: 07/27/15 APPLICABILITY: 2015MY WRX and STI Models SUBJECT: Design Change to Trunk Latch Assembly   INTRODUCTION This bulletin announces a design change to enhance the operation of the trunk latch mechanism and prevent it from releasing immediately after closing.   PRODUCTION CHANGE INFORMATION: The new latch assembly was incorporated into production on … Read more

WQR-53 – Takata Front Passenger Air Bag Inflator Replacement – 2003-2008 Subaru

Subaru Logo

May 28, 2015 NHTSA CAMPAIGN NUMBER: 15V323000 Passenger Side Front Air Bag Inflator may Rupture In the event of a crash necessitating deployment of the passenger’s frontal air bag, the inflator could rupture with metal fragments striking the vehicle occupants potentially resulting in serious injury or death.   NHTSA Campaign Number: 15V323 Manufacturer Subaru of America, Inc. Components AIR … Read more

Design Change to Stop Light Switch – 2008-2014 Subaru

NUMBER: 06-48-15R DATE: 05/15/15 REVISED: 10/12/15   APPLICABILITY: 2014MY Forester 2008 -14MY WRX and STI 2012-14MY Impreza 2.0L 2013 -14MY XV Crosstrek (EXCEPT Hybrid Model) SUBJECT: Design Change to Stop Light Switch   INTRODUCTION This bulletin announces a design change to the stop light switch to reduce the possibility of improper illumination of the ABS … Read more

2014 Exchange Component Identification and Procedures – 2014 Subaru

Subaru Logo

NUMBER: 15-168-13R DATE: 08/09/13 REVISED: 09/11/15 APPLICABILITY: 2014MY Subaru Vehicles SUBJECT: 2014 Exchange Component Identification and Procedures   INTRODUCTION This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. The exchange program policy can also be found in Sections 8.4.9 and 11.2.10 of your Service … Read more